From: Cai Huoqing <cai.huoqing@linux.dev>
To: cai.huoqing@linux.dev
Cc: "David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Zhengchao Shao" <shaozhengchao@huawei.com>,
"Bin Chen" <bin.chen@corigine.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Peter Chen" <peter.chen@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] net: hinic: Add control command support for VF PMD driver in DPDK
Date: Wed, 26 Oct 2022 20:59:11 +0800 [thread overview]
Message-ID: <20221026125922.34080-2-cai.huoqing@linux.dev> (raw)
In-Reply-To: <20221026125922.34080-1-cai.huoqing@linux.dev>
HINIC has a mailbox for PF-VF communication and the VF driver
could send port control command to PF driver via mailbox.
The control command only can be set to register in PF,
so add support in PF driver for VF PMD driver control
command when VF PMD driver work with linux PF driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
---
.../net/ethernet/huawei/hinic/hinic_hw_dev.h | 64 +++++++++++++++++++
.../net/ethernet/huawei/hinic/hinic_sriov.c | 18 ++++++
2 files changed, 82 insertions(+)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
index abffd967a791..4f561e4e849a 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
@@ -53,11 +53,15 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_SET_PFC = 0x5,
+ HINIC_PORT_CMD_SET_ETS = 0x7,
+ HINIC_PORT_CMD_GET_ETS = 0x8,
+
HINIC_PORT_CMD_SET_MAC = 0x9,
HINIC_PORT_CMD_GET_MAC = 0xA,
HINIC_PORT_CMD_DEL_MAC = 0xB,
HINIC_PORT_CMD_SET_RX_MODE = 0xC,
+ HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE = 0xD,
HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14,
HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15,
@@ -81,6 +85,7 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25,
HINIC_PORT_CMD_SET_PORT_STATE = 0x29,
+ HINIC_PORT_CMD_GET_PORT_STATE = 0x30,
HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B,
HINIC_PORT_CMD_GET_RSS_TEMPLATE_TBL = 0x2C,
@@ -97,17 +102,29 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_RSS_CFG = 0x42,
+ HINIC_PORT_CMD_GET_PHY_TYPE = 0x44,
+
HINIC_PORT_CMD_FWCTXT_INIT = 0x45,
HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48,
HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49,
+ HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4A,
+ HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE = 0x4B,
+
HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E,
HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58,
+ HINIC_PORT_CMD_GET_PORT_TYPE = 0x5B,
+
HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D,
+ HINIC_PORT_CMD_GET_PORT_ID_BY_FUNC_ID = 0x5E,
+
+ HINIC_PORT_CMD_GET_DMA_CS = 0x64,
+ HINIC_PORT_CMD_SET_DMA_CS = 0x65,
+
HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66,
HINIC_PORT_CMD_SET_VF_RATE = 0x69,
@@ -121,25 +138,72 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73,
+ HINIC_PORT_CMD_SET_PFC_THD = 0x75,
+
HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0,
+ HINIC_PORT_CMD_SET_LOSSLESS_ETH = 0xA3,
+
HINIC_PORT_CMD_UPDATE_MAC = 0xA4,
HINIC_PORT_CMD_GET_CAP = 0xAA,
+ HINIC_PORT_CMD_UP_TC_ADD_FLOW = 0xAF,
+ HINIC_PORT_CMD_UP_TC_DEL_FLOW = 0xB0,
+ HINIC_PORT_CMD_UP_TC_GET_FLOW = 0xB1,
+
+ HINIC_PORT_CMD_UP_TC_FLUSH_TCAM = 0xB2,
+
+ HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK = 0xB3,
+
+ HINIC_PORT_CMD_UP_TC_ENABLE = 0xB4,
+
+ HINIC_PORT_CMD_UP_TC_GET_TCAM_BLOCK = 0xB5,
+
+ HINIC_PORT_CMD_SET_IPSU_MAC = 0xCB,
+ HINIC_PORT_CMD_GET_IPSU_MAC = 0xCC,
+
+ HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4,
HINIC_PORT_CMD_GET_LINK_MODE = 0xD9,
HINIC_PORT_CMD_SET_SPEED = 0xDA,
HINIC_PORT_CMD_SET_AUTONEG = 0xDB,
+ HINIC_PORT_CMD_CLEAR_QP_RES = 0xDD,
+
+ HINIC_PORT_CMD_SET_SUPER_CQE = 0xDE,
+
+ HINIC_PORT_CMD_SET_VF_COS = 0xDF,
+ HINIC_PORT_CMD_GET_VF_COS = 0xE1,
+
+ HINIC_PORT_CMD_CABLE_PLUG_EVENT = 0xE5,
+
+ HINIC_PORT_CMD_LINK_ERR_EVENT = 0xE6,
+
+ HINIC_PORT_CMD_SET_COS_UP_MAP = 0xE8,
+
+ HINIC_PORT_CMD_RESET_LINK_CFG = 0xEB,
+
HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0,
+ HINIC_PORT_CMD_FORCE_PKT_DROP = 0xF3,
+
HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4,
+ HINIC_PORT_CMD_SET_VHD_CFG = 0xF7,
+
+ HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8,
+
HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9,
HINIC_PORT_CMD_GET_SFP_ABS = 0xFB,
+
+ HINIC_PORT_CMD_Q_FILTER = 0xFC,
+
+ HINIC_PORT_CMD_TCAM_FILTER = 0xFE,
+
+ HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF
};
/* cmd of mgmt CPU message for HILINK module */
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
index a5f08b969e3f..bba41994dee6 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
@@ -489,6 +489,24 @@ static struct vf_cmd_check_handle nic_cmd_support_vf[] = {
{HINIC_PORT_CMD_UPDATE_MAC, hinic_mbox_check_func_id_8B},
{HINIC_PORT_CMD_GET_CAP, hinic_mbox_check_func_id_8B},
{HINIC_PORT_CMD_GET_LINK_MODE, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_GET_VF_COS, NULL},
+ {HINIC_PORT_CMD_SET_VHD_CFG, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_SET_VLAN_FILTER, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_Q_FILTER, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_TCAM_FILTER, NULL},
+ {HINIC_PORT_CMD_UP_TC_ADD_FLOW, NULL},
+ {HINIC_PORT_CMD_UP_TC_DEL_FLOW, NULL},
+ {HINIC_PORT_CMD_UP_TC_FLUSH_TCAM, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_UP_TC_ENABLE, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_CABLE_PLUG_EVENT, NULL},
+ {HINIC_PORT_CMD_LINK_ERR_EVENT, NULL},
+ {HINIC_PORT_CMD_SET_PORT_STATE, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_SET_ETS, NULL},
+ {HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE, NULL},
+ {HINIC_PORT_CMD_RESET_LINK_CFG, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_SET_LINK_FOLLOW, NULL},
+ {HINIC_PORT_CMD_CLEAR_QP_RES, NULL},
};
#define CHECK_IPSU_15BIT 0X8000
--
2.25.1
next prev parent reply other threads:[~2022-10-26 12:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-26 12:59 [PATCH 1/2] net: hinic: Convert the cmd code from decimal to hex to be more readable Cai Huoqing
2022-10-26 12:59 ` Cai Huoqing [this message]
2022-10-27 18:03 ` [PATCH 2/2] net: hinic: Add control command support for VF PMD driver in DPDK Jakub Kicinski
2022-10-28 4:56 ` Cai Huoqing
2022-10-28 15:56 ` Jakub Kicinski
2022-10-29 7:53 ` Cai Huoqing
2022-10-31 23:52 ` Jakub Kicinski
2022-11-01 1:49 ` Cai Huoqing
2022-11-01 2:58 ` Jakub Kicinski
2022-10-28 1:21 ` shaozhengchao
2022-10-28 5:24 ` Cai Huoqing
2022-10-27 18:02 ` [PATCH 1/2] net: hinic: Convert the cmd code from decimal to hex to be more readable Jakub Kicinski
2022-10-28 4:37 ` Cai Huoqing
2022-10-31 2:17 ` Cai Huoqing
2022-11-01 2:23 ` Cai Huoqing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221026125922.34080-2-cai.huoqing@linux.dev \
--to=cai.huoqing@linux.dev \
--cc=bin.chen@corigine.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peter.chen@kernel.org \
--cc=shaozhengchao@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).