From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: martin.petersen@oracle.com, jejb@linux.ibm.com,
andersson@kernel.org, vkoul@kernel.org,
krzysztof.kozlowski+dt@linaro.org
Cc: konrad.dybcio@somainline.org, robh+dt@kernel.org,
quic_cang@quicinc.com, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org, linux-scsi@vger.kernel.org,
dmitry.baryshkov@linaro.org, ahalaney@redhat.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v2 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct
Date: Mon, 31 Oct 2022 23:32:03 +0530 [thread overview]
Message-ID: <20221031180217.32512-2-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20221031180217.32512-1-manivannan.sadhasivam@linaro.org>
As done for Qcom PCIe PHY driver, let's move the register settings to the
common qmp_phy_cfg_tables struct. This helps in adding any additional PHY
settings needed for functionalities like HS-G4 in the future by adding one
more instance of the qmp_phy_cfg_tables.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 223 +++++++++++++-----------
1 file changed, 126 insertions(+), 97 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index c08d34ad1313..cdfda4e6d575 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -107,7 +107,7 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
};
-static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
@@ -156,12 +156,12 @@ static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
};
-static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+static const struct qmp_phy_init_tbl msm8996_ufs_tx[] = {
QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
};
-static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+static const struct qmp_phy_init_tbl msm8996_ufs_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
@@ -175,7 +175,7 @@ static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
};
-static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
@@ -231,12 +231,12 @@ static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
};
-static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx[] = {
QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
};
-static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
@@ -254,7 +254,7 @@ static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
};
-static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs[] = {
QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_PWM_GEAR_BAND, 0x15),
QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_SIGDET_CTRL2, 0x6d),
QMP_PHY_INIT_CFG(QPHY_V2_PCS_TX_LARGE_AMP_DRV_LVL, 0x0f),
@@ -266,7 +266,7 @@ static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
};
-static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
@@ -308,13 +308,13 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
};
-static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
};
-static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
@@ -333,7 +333,7 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
};
-static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6e),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
@@ -344,7 +344,7 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
};
-static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
@@ -374,7 +374,7 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
};
-static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
@@ -383,7 +383,7 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
};
-static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
@@ -421,7 +421,7 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
};
-static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
@@ -431,7 +431,7 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
};
-static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
@@ -461,7 +461,7 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
};
-static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
@@ -473,7 +473,7 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
};
-static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
@@ -513,7 +513,7 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
};
-static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
@@ -531,19 +531,24 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
};
+struct qmp_phy_cfg_tables {
+ /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_init_tbl *serdes;
+ int serdes_num;
+ const struct qmp_phy_init_tbl *tx;
+ int tx_num;
+ const struct qmp_phy_init_tbl *rx;
+ int rx_num;
+ const struct qmp_phy_init_tbl *pcs;
+ int pcs_num;
+};
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
int lanes;
- /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
- const struct qmp_phy_init_tbl *serdes_tbl;
- int serdes_tbl_num;
- const struct qmp_phy_init_tbl *tx_tbl;
- int tx_tbl_num;
- const struct qmp_phy_init_tbl *rx_tbl;
- int rx_tbl_num;
- const struct qmp_phy_init_tbl *pcs_tbl;
- int pcs_tbl_num;
+ /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_cfg_tables tables;
/* clock ids to be requested */
const char * const *clk_list;
@@ -660,12 +665,14 @@ static const char * const qmp_phy_vreg_l[] = {
static const struct qmp_phy_cfg msm8996_ufs_cfg = {
.lanes = 1,
- .serdes_tbl = msm8996_ufs_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
- .tx_tbl = msm8996_ufs_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
- .rx_tbl = msm8996_ufs_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
+ .tables = {
+ .serdes = msm8996_ufs_serdes,
+ .serdes_num = ARRAY_SIZE(msm8996_ufs_serdes),
+ .tx = msm8996_ufs_tx,
+ .tx_num = ARRAY_SIZE(msm8996_ufs_tx),
+ .rx = msm8996_ufs_rx,
+ .rx_num = ARRAY_SIZE(msm8996_ufs_rx),
+ },
.clk_list = msm8996_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
@@ -685,14 +692,16 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = {
static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.lanes = 2,
- .serdes_tbl = sdm845_ufsphy_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
- .tx_tbl = sdm845_ufsphy_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
- .rx_tbl = sdm845_ufsphy_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
- .pcs_tbl = sdm845_ufsphy_pcs_tbl,
- .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+ .tables = {
+ .serdes = sdm845_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sdm845_ufsphy_serdes),
+ .tx = sdm845_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sdm845_ufsphy_tx),
+ .rx = sdm845_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sdm845_ufsphy_rx),
+ .pcs = sdm845_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sdm845_ufsphy_pcs),
+ },
.clk_list = sdm845_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
@@ -709,14 +718,16 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
.lanes = 1,
- .serdes_tbl = sm6115_ufsphy_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
- .tx_tbl = sm6115_ufsphy_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
- .rx_tbl = sm6115_ufsphy_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
- .pcs_tbl = sm6115_ufsphy_pcs_tbl,
- .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .tables = {
+ .serdes = sm6115_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm6115_ufsphy_serdes),
+ .tx = sm6115_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm6115_ufsphy_tx),
+ .rx = sm6115_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm6115_ufsphy_rx),
+ .pcs = sm6115_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm6115_ufsphy_pcs),
+ },
.clk_list = sdm845_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
@@ -732,14 +743,16 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
.lanes = 2,
- .serdes_tbl = sm8150_ufsphy_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
- .tx_tbl = sm8150_ufsphy_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
- .rx_tbl = sm8150_ufsphy_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
- .pcs_tbl = sm8150_ufsphy_pcs_tbl,
- .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+ .tables = {
+ .serdes = sm8150_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8150_ufsphy_serdes),
+ .tx = sm8150_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8150_ufsphy_tx),
+ .rx = sm8150_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8150_ufsphy_rx),
+ .pcs = sm8150_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8150_ufsphy_pcs),
+ },
.clk_list = sdm845_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
@@ -754,14 +767,16 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
.lanes = 2,
- .serdes_tbl = sm8350_ufsphy_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
- .tx_tbl = sm8350_ufsphy_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
- .rx_tbl = sm8350_ufsphy_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
- .pcs_tbl = sm8350_ufsphy_pcs_tbl,
- .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .tables = {
+ .serdes = sm8350_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes),
+ .tx = sm8350_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx),
+ .rx = sm8350_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx),
+ .pcs = sm8350_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs),
+ },
.clk_list = sdm845_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
@@ -776,14 +791,16 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
.lanes = 2,
- .serdes_tbl = sm8350_ufsphy_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
- .tx_tbl = sm8350_ufsphy_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
- .rx_tbl = sm8350_ufsphy_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
- .pcs_tbl = sm8350_ufsphy_pcs_tbl,
- .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .tables = {
+ .serdes = sm8350_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes),
+ .tx = sm8350_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx),
+ .rx = sm8350_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx),
+ .pcs = sm8350_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs),
+ },
.clk_list = sm8450_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
@@ -826,16 +843,43 @@ static void qmp_ufs_configure(void __iomem *base,
qmp_ufs_configure_lane(base, regs, tbl, num, 0xff);
}
-static int qmp_ufs_serdes_init(struct qmp_phy *qphy)
+static void qmp_ufs_serdes_init(struct qmp_phy *qphy, const struct qmp_phy_cfg_tables *tables)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->serdes;
- const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
- int serdes_tbl_num = cfg->serdes_tbl_num;
- qmp_ufs_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+ if (!tables)
+ return;
- return 0;
+ qmp_ufs_configure(serdes, cfg->regs, tables->serdes, tables->serdes_num);
+}
+
+static void qmp_ufs_lanes_init(struct qmp_phy *qphy, const struct qmp_phy_cfg_tables *tables)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+
+ qmp_ufs_configure_lane(tx, cfg->regs, tables->tx, tables->tx_num, 1);
+
+ if (cfg->lanes >= 2)
+ qmp_ufs_configure_lane(qphy->tx2, cfg->regs, tables->tx, tables->tx_num, 2);
+
+ qmp_ufs_configure_lane(rx, cfg->regs, tables->rx, tables->rx_num, 1);
+
+ if (cfg->lanes >= 2)
+ qmp_ufs_configure_lane(qphy->rx2, cfg->regs, tables->rx, tables->rx_num, 2);
+}
+
+static void qmp_ufs_pcs_init(struct qmp_phy *qphy, const struct qmp_phy_cfg_tables *tables)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+
+ if (!tables)
+ return;
+
+ qmp_ufs_configure(pcs, cfg->regs, tables->pcs, tables->pcs_num);
}
static int qmp_ufs_com_init(struct qmp_phy *qphy)
@@ -933,31 +977,16 @@ static int qmp_ufs_power_on(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *tx = qphy->tx;
- void __iomem *rx = qphy->rx;
void __iomem *pcs = qphy->pcs;
void __iomem *status;
unsigned int mask, val, ready;
int ret;
- qmp_ufs_serdes_init(qphy);
-
- /* Tx, Rx, and PCS configurations */
- qmp_ufs_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ qmp_ufs_serdes_init(qphy, &cfg->tables);
- if (cfg->lanes >= 2) {
- qmp_ufs_configure_lane(qphy->tx2, cfg->regs,
- cfg->tx_tbl, cfg->tx_tbl_num, 2);
- }
-
- qmp_ufs_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1);
-
- if (cfg->lanes >= 2) {
- qmp_ufs_configure_lane(qphy->rx2, cfg->regs,
- cfg->rx_tbl, cfg->rx_tbl_num, 2);
- }
+ qmp_ufs_lanes_init(qphy, &cfg->tables);
- qmp_ufs_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ qmp_ufs_pcs_init(qphy, &cfg->tables);
ret = reset_control_deassert(qmp->ufs_reset);
if (ret)
--
2.25.1
next prev parent reply other threads:[~2022-10-31 18:02 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-31 18:02 [PATCH v2 00/15] ufs: qcom: Add HS-G4 support Manivannan Sadhasivam
2022-10-31 18:02 ` Manivannan Sadhasivam [this message]
2022-11-11 6:57 ` [PATCH v2 01/15] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tables struct Vinod Koul
2022-10-31 18:02 ` [PATCH v2 02/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode Manivannan Sadhasivam
2022-11-11 7:01 ` Vinod Koul
2022-11-22 16:21 ` Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 03/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 04/15] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 05/15] phy: qcom-qmp-ufs: Move HS Rate B register setting to tables_hs_b Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 06/15] dt-bindings: ufs: Add "max-device-gear" property for UFS device Manivannan Sadhasivam
2022-11-02 16:29 ` Rob Herring
2022-11-02 19:09 ` Krzysztof Kozlowski
2022-11-03 12:28 ` Manivannan Sadhasivam
2022-11-03 15:23 ` Krzysztof Kozlowski
2022-11-22 16:22 ` Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 07/15] arm64: dts: qcom: qrb5165-rb5: Add max-device-gear property to UFS node Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 08/15] scsi: ufs: ufs-qcom: Remove un-necessary goto statements Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 09/15] scsi: ufs: ufs-qcom: Remove un-necessary WARN_ON() Manivannan Sadhasivam
2022-10-31 20:01 ` Andrew Halaney
2022-10-31 18:02 ` [PATCH v2 10/15] scsi: ufs: ufs-qcom: Use bitfields where appropriate Manivannan Sadhasivam
2022-10-31 18:02 ` [PATCH v2 11/15] scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error Manivannan Sadhasivam
2022-10-31 20:05 ` Andrew Halaney
2022-10-31 18:02 ` [PATCH v2 12/15] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0 Manivannan Sadhasivam
2022-11-01 15:12 ` Andrew Halaney
2022-10-31 18:02 ` [PATCH v2 13/15] scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear Manivannan Sadhasivam
2022-10-31 20:31 ` Andrew Halaney
2022-10-31 18:02 ` [PATCH v2 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions Manivannan Sadhasivam
2022-10-31 20:52 ` Andrew Halaney
2022-10-31 18:02 ` [PATCH v2 15/15] MAINTAINERS: Add myself as the maintainer for Qcom UFS driver Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221031180217.32512-2-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=jejb@linux.ibm.com \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=quic_cang@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).