* [PATCH V4] PCI: loongson: Skip scanning unavailable child devices @ 2022-11-08 6:42 Liu Peibao 2022-11-10 21:07 ` Bjorn Helgaas 0 siblings, 1 reply; 6+ messages in thread From: Liu Peibao @ 2022-11-08 6:42 UTC (permalink / raw) To: Bjorn Helgaas, Rob Herring, Krzysztof Kozlowski, Lorenzo Pieralisi, Krzysztof Wilczyński, Jiaxun Yang, Christophe JAILLET Cc: Huacai Chen, Jianmin Lv, Yinbo Zhu, Liu Peibao, linux-pci, linux-kernel The PCI Controller of 2k1000 could not mask devices by setting vender ID or device ID in configuration space header as invalid values. When there are pins shareable between the platform device and PCI device, if the platform device is preferred, we should not scan this PCI device. In the above scene, add `status = "disabled"` property in DT node of this PCI device. Signed-off-by: Liu Peibao <liupeibao@loongson.cn> --- V3 -> V4: 1. get rid of the masklist and search the status property directly. 2. check the status property only when accessing the vendor ID. V2 -> V3: 1. use list_for_each_entry() for more clearly. 2. fix wrong use of sizeof(). V1 -> V2: use existing property "status" instead of adding new property. drivers/pci/controller/pci-loongson.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 05c50408f13b..efca0b3b5a29 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, return NULL; } +#ifdef CONFIG_OF + /* Don't access disabled devices. */ + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) { + struct device_node *dn; + + dn = of_pci_find_child_device(bus->dev.of_node, devfn); + if (dn && !of_device_is_available(dn)) + return NULL; + } +#endif + /* CFG0 can only access standard space */ if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) return cfg0_map(priv, bus, devfn, where); -- 2.20.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V4] PCI: loongson: Skip scanning unavailable child devices 2022-11-08 6:42 [PATCH V4] PCI: loongson: Skip scanning unavailable child devices Liu Peibao @ 2022-11-10 21:07 ` Bjorn Helgaas 2022-11-10 23:00 ` Jiaxun Yang 0 siblings, 1 reply; 6+ messages in thread From: Bjorn Helgaas @ 2022-11-10 21:07 UTC (permalink / raw) To: Liu Peibao Cc: Bjorn Helgaas, Rob Herring, Krzysztof Kozlowski, Lorenzo Pieralisi, Krzysztof Wilczyński, Jiaxun Yang, Christophe JAILLET, Huacai Chen, Jianmin Lv, Yinbo Zhu, linux-pci, linux-kernel On Tue, Nov 08, 2022 at 02:42:40PM +0800, Liu Peibao wrote: > The PCI Controller of 2k1000 could not mask devices by setting vender ID or > device ID in configuration space header as invalid values. When there are > pins shareable between the platform device and PCI device, if the platform > device is preferred, we should not scan this PCI device. In the above > scene, add `status = "disabled"` property in DT node of this PCI device. > > Signed-off-by: Liu Peibao <liupeibao@loongson.cn> > --- > V3 -> V4: 1. get rid of the masklist and search the status property > directly. > 2. check the status property only when accessing the vendor ID. > V2 -> V3: 1. use list_for_each_entry() for more clearly. > 2. fix wrong use of sizeof(). > V1 -> V2: use existing property "status" instead of adding new property. > > drivers/pci/controller/pci-loongson.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c > index 05c50408f13b..efca0b3b5a29 100644 > --- a/drivers/pci/controller/pci-loongson.c > +++ b/drivers/pci/controller/pci-loongson.c > @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, > return NULL; > } > > +#ifdef CONFIG_OF > + /* Don't access disabled devices. */ > + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) { > + struct device_node *dn; > + > + dn = of_pci_find_child_device(bus->dev.of_node, devfn); > + if (dn && !of_device_is_available(dn)) > + return NULL; > + } > +#endif Looks nice and simple, thanks for trying this out. > /* CFG0 can only access standard space */ > if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) > return cfg0_map(priv, bus, devfn, where); > -- > 2.20.1 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V4] PCI: loongson: Skip scanning unavailable child devices 2022-11-10 21:07 ` Bjorn Helgaas @ 2022-11-10 23:00 ` Jiaxun Yang 2022-11-10 23:13 ` Bjorn Helgaas 0 siblings, 1 reply; 6+ messages in thread From: Jiaxun Yang @ 2022-11-10 23:00 UTC (permalink / raw) To: Bjorn Helgaas, Liu Peibao Cc: Bjorn Helgaas, Rob Herring, Krzysztof Kozlowski, Lorenzo Pieralisi, Krzysztof Wilczyński, Christophe JAILLET, Huacai Chen, Jianmin Lv, Yinbo Zhu, linux-pci, linux-kernel 在2022年11月10日十一月 下午9:07,Bjorn Helgaas写道: > On Tue, Nov 08, 2022 at 02:42:40PM +0800, Liu Peibao wrote: >> The PCI Controller of 2k1000 could not mask devices by setting vender ID or >> device ID in configuration space header as invalid values. When there are >> pins shareable between the platform device and PCI device, if the platform >> device is preferred, we should not scan this PCI device. In the above >> scene, add `status = "disabled"` property in DT node of this PCI device. >> >> Signed-off-by: Liu Peibao <liupeibao@loongson.cn> >> --- >> V3 -> V4: 1. get rid of the masklist and search the status property >> directly. >> 2. check the status property only when accessing the vendor ID. >> V2 -> V3: 1. use list_for_each_entry() for more clearly. >> 2. fix wrong use of sizeof(). >> V1 -> V2: use existing property "status" instead of adding new property. >> >> drivers/pci/controller/pci-loongson.c | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c >> index 05c50408f13b..efca0b3b5a29 100644 >> --- a/drivers/pci/controller/pci-loongson.c >> +++ b/drivers/pci/controller/pci-loongson.c >> @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, >> return NULL; >> } >> >> +#ifdef CONFIG_OF >> + /* Don't access disabled devices. */ >> + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) { >> + struct device_node *dn; >> + >> + dn = of_pci_find_child_device(bus->dev.of_node, devfn); >> + if (dn && !of_device_is_available(dn)) >> + return NULL; >> + } >> +#endif > > Looks nice and simple, thanks for trying this out. Should we make this into common PCI code? I guess Loongson won’t be the last platform having such problem. > >> /* CFG0 can only access standard space */ >> if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) >> return cfg0_map(priv, bus, devfn, where); >> -- >> 2.20.1 >> -- - Jiaxun ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V4] PCI: loongson: Skip scanning unavailable child devices 2022-11-10 23:00 ` Jiaxun Yang @ 2022-11-10 23:13 ` Bjorn Helgaas 2022-11-11 16:06 ` Jiaxun Yang 0 siblings, 1 reply; 6+ messages in thread From: Bjorn Helgaas @ 2022-11-10 23:13 UTC (permalink / raw) To: Jiaxun Yang Cc: Liu Peibao, Bjorn Helgaas, Rob Herring, Krzysztof Kozlowski, Lorenzo Pieralisi, Krzysztof Wilczyński, Christophe JAILLET, Huacai Chen, Jianmin Lv, Yinbo Zhu, linux-pci, linux-kernel On Thu, Nov 10, 2022 at 11:00:45PM +0000, Jiaxun Yang wrote: > 在2022年11月10日十一月 下午9:07,Bjorn Helgaas写道: > > On Tue, Nov 08, 2022 at 02:42:40PM +0800, Liu Peibao wrote: > >> The PCI Controller of 2k1000 could not mask devices by setting vender ID or > >> device ID in configuration space header as invalid values. When there are > >> pins shareable between the platform device and PCI device, if the platform > >> device is preferred, we should not scan this PCI device. In the above > >> scene, add `status = "disabled"` property in DT node of this PCI device. > >> > >> Signed-off-by: Liu Peibao <liupeibao@loongson.cn> > >> --- > >> V3 -> V4: 1. get rid of the masklist and search the status property > >> directly. > >> 2. check the status property only when accessing the vendor ID. > >> V2 -> V3: 1. use list_for_each_entry() for more clearly. > >> 2. fix wrong use of sizeof(). > >> V1 -> V2: use existing property "status" instead of adding new property. > >> > >> drivers/pci/controller/pci-loongson.c | 11 +++++++++++ > >> 1 file changed, 11 insertions(+) > >> > >> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c > >> index 05c50408f13b..efca0b3b5a29 100644 > >> --- a/drivers/pci/controller/pci-loongson.c > >> +++ b/drivers/pci/controller/pci-loongson.c > >> @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, > >> return NULL; > >> } > >> > >> +#ifdef CONFIG_OF > >> + /* Don't access disabled devices. */ > >> + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) { > >> + struct device_node *dn; > >> + > >> + dn = of_pci_find_child_device(bus->dev.of_node, devfn); > >> + if (dn && !of_device_is_available(dn)) > >> + return NULL; > >> + } > >> +#endif > > > > Looks nice and simple, thanks for trying this out. > > Should we make this into common PCI code? > I guess Loongson won’t be the last platform having such problem. I think we should wait until somebody else has this problem. It's not a completely trivial situation because if the device uses PCI memory or I/O space, we have to worry about how that space is handled. Does the BIOS assign that space? Is it included in the host bridge _CRS or "ranges" properties? If the device is below any PCI bridges (I don't think that's the case in your situation), how does the space it requires get routed through the bridges? It would be nice to say something in this commit log about whether these are issues on your platform. > >> /* CFG0 can only access standard space */ > >> if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) > >> return cfg0_map(priv, bus, devfn, where); > >> -- > >> 2.20.1 > >> > > -- > - Jiaxun ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V4] PCI: loongson: Skip scanning unavailable child devices 2022-11-10 23:13 ` Bjorn Helgaas @ 2022-11-11 16:06 ` Jiaxun Yang 2022-11-14 4:03 ` Liu Peibao 0 siblings, 1 reply; 6+ messages in thread From: Jiaxun Yang @ 2022-11-11 16:06 UTC (permalink / raw) To: Bjorn Helgaas Cc: Liu Peibao, Bjorn Helgaas, Rob Herring, Krzysztof Kozlowski, Lorenzo Pieralisi, Krzysztof Wilczyński, Christophe JAILLET, Huacai Chen, Jianmin Lv, Yinbo Zhu, linux-pci, linux-kernel 在 2022/11/10 23:13, Bjorn Helgaas 写道: > On Thu, Nov 10, 2022 at 11:00:45PM +0000, Jiaxun Yang wrote: >> 在2022年11月10日十一月 下午9:07,Bjorn Helgaas写道: >>> On Tue, Nov 08, 2022 at 02:42:40PM +0800, Liu Peibao wrote: >>>> The PCI Controller of 2k1000 could not mask devices by setting vender ID or >>>> device ID in configuration space header as invalid values. When there are >>>> pins shareable between the platform device and PCI device, if the platform >>>> device is preferred, we should not scan this PCI device. In the above >>>> scene, add `status = "disabled"` property in DT node of this PCI device. >>>> >>>> Signed-off-by: Liu Peibao <liupeibao@loongson.cn> >>>> --- >>>> V3 -> V4: 1. get rid of the masklist and search the status property >>>> directly. >>>> 2. check the status property only when accessing the vendor ID. >>>> V2 -> V3: 1. use list_for_each_entry() for more clearly. >>>> 2. fix wrong use of sizeof(). >>>> V1 -> V2: use existing property "status" instead of adding new property. >>>> >>>> drivers/pci/controller/pci-loongson.c | 11 +++++++++++ >>>> 1 file changed, 11 insertions(+) >>>> >>>> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c >>>> index 05c50408f13b..efca0b3b5a29 100644 >>>> --- a/drivers/pci/controller/pci-loongson.c >>>> +++ b/drivers/pci/controller/pci-loongson.c >>>> @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, >>>> return NULL; >>>> } >>>> >>>> +#ifdef CONFIG_OF >>>> + /* Don't access disabled devices. */ >>>> + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) { >>>> + struct device_node *dn; >>>> + >>>> + dn = of_pci_find_child_device(bus->dev.of_node, devfn); >>>> + if (dn && !of_device_is_available(dn)) >>>> + return NULL; >>>> + } >>>> +#endif >>> Looks nice and simple, thanks for trying this out. >> Should we make this into common PCI code? >> I guess Loongson won’t be the last platform having such problem. > I think we should wait until somebody else has this problem. > > It's not a completely trivial situation because if the device uses PCI > memory or I/O space, we have to worry about how that space is handled. > Does the BIOS assign that space? Is it included in the host bridge > _CRS or "ranges" properties? If the device is below any PCI bridges > (I don't think that's the case in your situation), how does the space > it requires get routed through the bridges? I believe in this case the address is assigned by BIOS and they are out of ranges properties of host bridge. Those are all on chip devices so there won't be any bridges. @Peibao, can you please confirm this? I was never able to boot mainline kernel on my LS2K board. Thanks. - Jiaxun > > It would be nice to say something in this commit log about whether > these are issues on your platform. > >>>> /* CFG0 can only access standard space */ >>>> if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) >>>> return cfg0_map(priv, bus, devfn, where); >>>> -- >>>> 2.20.1 >>>> >> -- >> - Jiaxun ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V4] PCI: loongson: Skip scanning unavailable child devices 2022-11-11 16:06 ` Jiaxun Yang @ 2022-11-14 4:03 ` Liu Peibao 0 siblings, 0 replies; 6+ messages in thread From: Liu Peibao @ 2022-11-14 4:03 UTC (permalink / raw) To: Jiaxun Yang, Bjorn Helgaas Cc: Bjorn Helgaas, Rob Herring, Krzysztof Kozlowski, Lorenzo Pieralisi, Krzysztof Wilczyński, Christophe JAILLET, Huacai Chen, Jianmin Lv, Yinbo Zhu, linux-pci, linux-kernel On 11/12/22 12:06 AM, Jiaxun Yang wrote: > > > 在 2022/11/10 23:13, Bjorn Helgaas 写道: >> On Thu, Nov 10, 2022 at 11:00:45PM +0000, Jiaxun Yang wrote: >>> 在2022年11月10日十一月 下午9:07,Bjorn Helgaas写道: >>>> On Tue, Nov 08, 2022 at 02:42:40PM +0800, Liu Peibao wrote: >>>>> The PCI Controller of 2k1000 could not mask devices by setting vender ID or >>>>> device ID in configuration space header as invalid values. When there are >>>>> pins shareable between the platform device and PCI device, if the platform >>>>> device is preferred, we should not scan this PCI device. In the above >>>>> scene, add `status = "disabled"` property in DT node of this PCI device. >>>>> >>>>> Signed-off-by: Liu Peibao <liupeibao@loongson.cn> >>>>> --- >>>>> V3 -> V4: 1. get rid of the masklist and search the status property >>>>> directly. >>>>> 2. check the status property only when accessing the vendor ID. >>>>> V2 -> V3: 1. use list_for_each_entry() for more clearly. >>>>> 2. fix wrong use of sizeof(). >>>>> V1 -> V2: use existing property "status" instead of adding new property. >>>>> >>>>> drivers/pci/controller/pci-loongson.c | 11 +++++++++++ >>>>> 1 file changed, 11 insertions(+) >>>>> >>>>> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c >>>>> index 05c50408f13b..efca0b3b5a29 100644 >>>>> --- a/drivers/pci/controller/pci-loongson.c >>>>> +++ b/drivers/pci/controller/pci-loongson.c >>>>> @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, >>>>> return NULL; >>>>> } >>>>> +#ifdef CONFIG_OF >>>>> + /* Don't access disabled devices. */ >>>>> + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) { >>>>> + struct device_node *dn; >>>>> + >>>>> + dn = of_pci_find_child_device(bus->dev.of_node, devfn); >>>>> + if (dn && !of_device_is_available(dn)) >>>>> + return NULL; >>>>> + } >>>>> +#endif >>>> Looks nice and simple, thanks for trying this out. >>> Should we make this into common PCI code? >>> I guess Loongson won’t be the last platform having such problem. >> I think we should wait until somebody else has this problem. >> >> It's not a completely trivial situation because if the device uses PCI >> memory or I/O space, we have to worry about how that space is handled. >> Does the BIOS assign that space? Is it included in the host bridge >> _CRS or "ranges" properties? If the device is below any PCI bridges >> (I don't think that's the case in your situation), how does the space >> it requires get routed through the bridges? > > I believe in this case the address is assigned by BIOS and they are out of ranges > properties of host bridge. Those are all on chip devices so there won't be any > bridges. > > @Peibao, can you please confirm this? I was never able to boot mainline kernel > on my LS2K board. > > Thanks. > - Jiaxun > @Jiaxun, Yes, the same as you said totally. Did you notice the following patch? The liointc of LS2K can't work after commit b2c4c3969fd7 ("irqchip/loongson-liointc: irqchip add 2.0 version"), which may cause the booting failure. https://lore.kernel.org/all/20221104110712.23300-1-liupeibao@loongson.cn/ In fact, I am developing this on the LoongArch compatible board LS2K1000LA. I boot the mainline kernel basing my FDT supporting patch set for LoongArch and the BIOS following current LoongArch booting protocol :). BR, Peibao > >> >> It would be nice to say something in this commit log about whether >> these are issues on your platform. >> @Bjorn, Thanks! I will update commit log in the next patch to clear the issue on our platform, which is absolutely what Jiaxun has described above. BR, Peibao ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-11-14 4:03 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-11-08 6:42 [PATCH V4] PCI: loongson: Skip scanning unavailable child devices Liu Peibao 2022-11-10 21:07 ` Bjorn Helgaas 2022-11-10 23:00 ` Jiaxun Yang 2022-11-10 23:13 ` Bjorn Helgaas 2022-11-11 16:06 ` Jiaxun Yang 2022-11-14 4:03 ` Liu Peibao
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).