From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org, Arun.Ramadoss@microchip.com
Subject: [PATCH v1 15/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): move main part of the code out of if statement
Date: Mon, 28 Nov 2022 13:00:23 +0100 [thread overview]
Message-ID: <20221128120034.4075562-16-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20221128120034.4075562-1-o.rempel@pengutronix.de>
Start reworking error handling of this function
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/dsa/microchip/ksz8795.c | 56 +++++++++++++++--------------
1 file changed, 29 insertions(+), 27 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index a6d5de41a754..2674fd553851 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -402,7 +402,9 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
const u32 *masks;
const u16 *regs;
u16 ctrl_addr;
+ u64 buf = 0;
u8 data;
+ int cnt;
int rc;
shifts = dev->info->shifts;
@@ -418,36 +420,36 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
if (rc == -EAGAIN) {
if (addr == 0)
*entries = 0;
+ goto unlock_alu;
} else if (rc == -ENXIO) {
*entries = 0;
- /* At least one valid entry in the table. */
- } else {
- u64 buf = 0;
- int cnt;
-
- ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
- data_hi = (u32)(buf >> 32);
- data_lo = (u32)buf;
-
- /* Check out how many valid entry in the table. */
- cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
- cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
- cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
- shifts[DYNAMIC_MAC_ENTRIES];
- *entries = cnt + 1;
-
- *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
- shifts[DYNAMIC_MAC_SRC_PORT];
-
- mac_addr[5] = (u8)data_lo;
- mac_addr[4] = (u8)(data_lo >> 8);
- mac_addr[3] = (u8)(data_lo >> 16);
- mac_addr[2] = (u8)(data_lo >> 24);
-
- mac_addr[1] = (u8)data_hi;
- mac_addr[0] = (u8)(data_hi >> 8);
- rc = 0;
+ goto unlock_alu;
}
+
+ ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+ data_hi = (u32)(buf >> 32);
+ data_lo = (u32)buf;
+
+ /* Check out how many valid entry in the table. */
+ cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+ cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+ cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+ shifts[DYNAMIC_MAC_ENTRIES];
+ *entries = cnt + 1;
+
+ *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+ shifts[DYNAMIC_MAC_SRC_PORT];
+
+ mac_addr[5] = (u8)data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+
+ mac_addr[1] = (u8)data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+ rc = 0;
+
+unlock_alu:
mutex_unlock(&dev->alu_mutex);
return rc;
--
2.30.2
next prev parent reply other threads:[~2022-11-28 12:04 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-28 12:00 [PATCH v1 00/26] net: dsa: microchip: stats64, fdb, error Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 01/26] net: dsa: microchip: add stats64 support for ksz8 series of switches Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 02/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix port validation and VID information Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 03/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix not complete fdb extraction Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 04/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix time stamp extraction Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 05/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: do not extract ghost entry from empty table Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 06/26] net: dsa: microchip: ksz8863_smi: fix bulk access Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 07/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): remove timestamp support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 08/26] net: dsa: microchip: make ksz8_r_dyn_mac_table() static Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 09/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): remove fid support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 10/26] net: dsa: microchip: ksz8: refactor ksz8_fdb_dump() Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 11/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: dump static MAC table Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 12/26] net: dsa: microchip: ksz8: move static mac table operations to a separate functions Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 13/26] net: dsa: microchip: ksz8: add fdb_add/del support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 14/26] net: dsa: microchip: KSZ88x3 fix loopback support Oleksij Rempel
2022-11-28 12:00 ` Oleksij Rempel [this message]
2022-11-28 12:00 ` [PATCH v1 16/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): use ret instead of rc Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 17/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN on timeout Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 18/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error if we got any Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 19/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to signal 0 entries Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 20/26] net: dsa: microchip: make ksz8_r_sta_mac_table() static Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 21/26] net: dsa: microchip: ksz8_r_sta_mac_table(): do not use error code for empty entries Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 22/26] net: dsa: microchip: ksz8_r_sta_mac_table(): make use of error values provided by read/write functions Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 23/26] net: dsa: microchip: make ksz8_w_sta_mac_table() static Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 24/26] net: dsa: microchip: ksz8_w_sta_mac_table(): make use of error values provided by read/write functions Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 25/26] net: dsa: microchip: remove ksz_port:on variable Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 26/26] net: dsa: microchip: ksz8: do not force flow control by default Oleksij Rempel
2022-11-28 12:10 ` [PATCH v1 00/26] net: dsa: microchip: stats64, fdb, error Oleksij Rempel
-- strict thread matches above, loose matches on Subject: below --
2022-11-28 11:59 Oleksij Rempel
2022-11-28 11:59 ` [PATCH v1 15/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): move main part of the code out of if statement Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221128120034.4075562-16-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=Arun.Ramadoss@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).