From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org, Arun.Ramadoss@microchip.com
Subject: [PATCH v1 25/26] net: dsa: microchip: remove ksz_port:on variable
Date: Mon, 28 Nov 2022 13:00:33 +0100 [thread overview]
Message-ID: <20221128120034.4075562-26-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20221128120034.4075562-1-o.rempel@pengutronix.de>
The only place where this variable would be set to false is the
ksz8_config_cpu_port() function. But it is done in a bogus way:
for (i = 0; i < dev->phy_port_cnt; i++) {
if (i == dev->phy_port_cnt) <--- will be never executed.
break;
p->on = 1;
So, we never have a situation where p->on = 0. In this case, we can just
remove it.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/dsa/microchip/ksz8795.c | 20 +-------------------
drivers/net/dsa/microchip/ksz_common.h | 1 -
2 files changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index ea08bdea193e..618366fadfb5 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -952,7 +952,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
{
u8 learn[DSA_MAX_PORTS];
int first, index, cnt;
- struct ksz_port *p;
const u16 *regs;
regs = dev->info->regs;
@@ -966,9 +965,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
cnt = dev->info->port_cnt;
}
for (index = first; index < cnt; index++) {
- p = &dev->ports[index];
- if (!p->on)
- continue;
ksz_pread8(dev, index, regs[P_STP_CTRL], &learn[index]);
if (!(learn[index] & PORT_LEARN_DISABLE))
ksz_pwrite8(dev, index, regs[P_STP_CTRL],
@@ -976,9 +972,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
}
ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
for (index = first; index < cnt; index++) {
- p = &dev->ports[index];
- if (!p->on)
- continue;
if (!(learn[index] & PORT_LEARN_DISABLE))
ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]);
}
@@ -1368,25 +1361,14 @@ void ksz8_config_cpu_port(struct dsa_switch *ds)
ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
- p = &dev->ports[dev->cpu_port];
- p->on = 1;
-
ksz8_port_setup(dev, dev->cpu_port, true);
for (i = 0; i < dev->phy_port_cnt; i++) {
- p = &dev->ports[i];
-
ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
-
- /* Last port may be disabled. */
- if (i == dev->phy_port_cnt)
- break;
- p->on = 1;
}
for (i = 0; i < dev->phy_port_cnt; i++) {
p = &dev->ports[i];
- if (!p->on)
- continue;
+
if (!ksz_is_ksz88x3(dev)) {
ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
if (remote & KSZ8_PORT_FIBER_MODE)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 055d61ff3fb8..504ad07842a0 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -87,7 +87,6 @@ struct ksz_port {
int stp_state;
struct phy_device phydev;
- u32 on:1; /* port is not disabled by hardware */
u32 fiber:1; /* port is fiber */
u32 force:1;
u32 read:1; /* read MIB counters in background */
--
2.30.2
next prev parent reply other threads:[~2022-11-28 12:04 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-28 12:00 [PATCH v1 00/26] net: dsa: microchip: stats64, fdb, error Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 01/26] net: dsa: microchip: add stats64 support for ksz8 series of switches Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 02/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix port validation and VID information Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 03/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix not complete fdb extraction Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 04/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix time stamp extraction Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 05/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: do not extract ghost entry from empty table Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 06/26] net: dsa: microchip: ksz8863_smi: fix bulk access Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 07/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): remove timestamp support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 08/26] net: dsa: microchip: make ksz8_r_dyn_mac_table() static Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 09/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): remove fid support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 10/26] net: dsa: microchip: ksz8: refactor ksz8_fdb_dump() Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 11/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: dump static MAC table Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 12/26] net: dsa: microchip: ksz8: move static mac table operations to a separate functions Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 13/26] net: dsa: microchip: ksz8: add fdb_add/del support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 14/26] net: dsa: microchip: KSZ88x3 fix loopback support Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 15/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): move main part of the code out of if statement Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 16/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): use ret instead of rc Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 17/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN on timeout Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 18/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error if we got any Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 19/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to signal 0 entries Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 20/26] net: dsa: microchip: make ksz8_r_sta_mac_table() static Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 21/26] net: dsa: microchip: ksz8_r_sta_mac_table(): do not use error code for empty entries Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 22/26] net: dsa: microchip: ksz8_r_sta_mac_table(): make use of error values provided by read/write functions Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 23/26] net: dsa: microchip: make ksz8_w_sta_mac_table() static Oleksij Rempel
2022-11-28 12:00 ` [PATCH v1 24/26] net: dsa: microchip: ksz8_w_sta_mac_table(): make use of error values provided by read/write functions Oleksij Rempel
2022-11-28 12:00 ` Oleksij Rempel [this message]
2022-11-28 12:00 ` [PATCH v1 26/26] net: dsa: microchip: ksz8: do not force flow control by default Oleksij Rempel
2022-11-28 12:10 ` [PATCH v1 00/26] net: dsa: microchip: stats64, fdb, error Oleksij Rempel
-- strict thread matches above, loose matches on Subject: below --
2022-11-28 11:59 Oleksij Rempel
2022-11-28 11:59 ` [PATCH v1 25/26] net: dsa: microchip: remove ksz_port:on variable Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221128120034.4075562-26-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=Arun.Ramadoss@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).