[PATCH v2 0/4] ASoC: microchip: power saving features and cleanups

[PATCH v2 0/4] ASoC: microchip: power saving features and cleanups

[Claudiu Beznea]

Hi,

The following series adds runtime PM and suspend to RAM features for
mchp-pdmc driver.

Along with it 2 cleanup patches were added:
- patch 1/4: use vendor,device.yaml file format for Microchip AT91 ASoC
  bindings
- patch 4/4: use FIELD_PREP() in mchp-spdiftx.c

Thank you,
Claudiu Beznea

Changes in v2:
- s/microchip,sama7g5-i2s-mcc/microchip,sama7g5-i2smcc as
  this is the 1st available compatible

Claudiu Beznea (4):
  ASoC: dt-bindings: microchip: use proper naming syntax
  ASoC: mchp-pdmc: use runtime pm for clock power saving
  ASoC: mchp-pdmc: add support for suspend to RAM
  ASoC: mchp-spdiftx: use FIELD_PREP() where possible

 .../bindings/sound/mchp,i2s-mcc.yaml          | 108 -------------
 ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} |   0
 ...rx.yaml => microchip,sama7g5-spdifrx.yaml} |   0
 ...tx.yaml => microchip,sama7g5-spdiftx.yaml} |   0
 sound/soc/atmel/mchp-pdmc.c                   | 145 ++++++++++++------
 sound/soc/atmel/mchp-spdiftx.c                |   8 +-
 6 files changed, 101 insertions(+), 160 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
 rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (100%)
 rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (100%)
 rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (100%)

-- 
2.34.1

[PATCH v2 1/4] ASoC: dt-bindings: microchip: use proper naming syntax

[Claudiu Beznea]

Use the following syntax for Microchip ASoC YAML files:
vendor,device.yaml

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 .../bindings/sound/mchp,i2s-mcc.yaml          | 108 ------------------
 ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} |   0
 ...rx.yaml => microchip,sama7g5-spdifrx.yaml} |   0
 ...tx.yaml => microchip,sama7g5-spdiftx.yaml} |   0
 4 files changed, 108 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
 rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (100%)
 rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (100%)
 rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (100%)

diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
deleted file mode 100644
index 0481315cb5f2..000000000000
--- a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
+++ /dev/null
@@ -1,108 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip I2S Multi-Channel Controller
-
-maintainers:
-  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-
-description:
-  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
-  supports a Time Division Multiplexed (TDM) interface with external
-  multi-channel audio codecs. It consists of a receiver, a transmitter and a
-  common clock generator that can be enabled separately to provide Adapter,
-  Client or Controller modes with receiver and/or transmitter active.
-  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
-  multi-channel is supported by using multiple data pins, output and
-  input, without TDM.
-
-properties:
-  "#sound-dai-cells":
-    const: 0
-
-  compatible:
-    enum:
-      - microchip,sam9x60-i2smcc
-      - microchip,sama7g5-i2smcc
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Peripheral Bus Clock
-      - description: Generic Clock (Optional). Should be set mostly when Master
-          Mode is required.
-    minItems: 1
-
-  clock-names:
-    items:
-      - const: pclk
-      - const: gclk
-    minItems: 1
-
-  dmas:
-    items:
-      - description: TX DMA Channel
-      - description: RX DMA Channel
-
-  dma-names:
-    items:
-      - const: tx
-      - const: rx
-
-  microchip,tdm-data-pair:
-    description:
-      Represents the DIN/DOUT pair pins that are used to receive/send
-      TDM data. It is optional and it is only needed if the controller
-      uses the TDM mode.
-    $ref: /schemas/types.yaml#/definitions/uint8
-    enum: [0, 1, 2, 3]
-    default: 0
-
-if:
-  properties:
-    compatible:
-      const: microchip,sam9x60-i2smcc
-then:
-  properties:
-    microchip,tdm-data-pair: false
-
-required:
-  - "#sound-dai-cells"
-  - compatible
-  - reg
-  - interrupts
-  - clocks
-  - clock-names
-  - dmas
-  - dma-names
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/dma/at91.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    i2s@f001c000 {
-        #sound-dai-cells = <0>;
-        compatible = "microchip,sam9x60-i2smcc";
-        reg = <0xf001c000 0x100>;
-        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
-        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-                       AT91_XDMAC_DT_PERID(36))>,
-               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-                       AT91_XDMAC_DT_PERID(37))>;
-        dma-names = "tx", "rx";
-        clocks = <&i2s_clk>, <&i2s_gclk>;
-        clock-names = "pclk", "gclk";
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_i2s_default>;
-    };
diff --git a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
similarity index 100%
rename from Documentation/devicetree/bindings/sound/microchip,pdmc.yaml
rename to Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml
similarity index 100%
rename from Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
rename to Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml
similarity index 100%
rename from Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
rename to Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml
-- 
2.34.1

[PATCH v2 2/4] ASoC: mchp-pdmc: use runtime pm for clock power saving

[Claudiu Beznea]

Implement clock power saving taking advantage of runtime PM infrastructure.
This simplifies the code and allow using the same infrastructure for
suspend to RAM functionalities.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 sound/soc/atmel/mchp-pdmc.c | 126 ++++++++++++++++++++++++------------
 1 file changed, 84 insertions(+), 42 deletions(-)

diff --git a/sound/soc/atmel/mchp-pdmc.c b/sound/soc/atmel/mchp-pdmc.c
index 44aefbd5b62c..f184404e74e5 100644
--- a/sound/soc/atmel/mchp-pdmc.c
+++ b/sound/soc/atmel/mchp-pdmc.c
@@ -11,6 +11,7 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
 #include <sound/core.h>
@@ -115,7 +116,6 @@ struct mchp_pdmc {
 	int mic_no;
 	int sinc_order;
 	bool audio_filter_en;
-	u8 gclk_enabled:1;
 };
 
 static const char *const mchp_pdmc_sinc_filter_order_text[] = {
@@ -454,13 +454,6 @@ static int mchp_pdmc_startup(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
 	struct mchp_pdmc *dd = snd_soc_dai_get_drvdata(dai);
-	int ret;
-
-	ret = clk_prepare_enable(dd->pclk);
-	if (ret) {
-		dev_err(dd->dev, "failed to enable the peripheral clock: %d\n", ret);
-		return ret;
-	}
 
 	regmap_write(dd->regmap, MCHP_PDMC_CR, MCHP_PDMC_CR_SWRST);
 
@@ -470,14 +463,6 @@ static int mchp_pdmc_startup(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static void mchp_pdmc_shutdown(struct snd_pcm_substream *substream,
-			       struct snd_soc_dai *dai)
-{
-	struct mchp_pdmc *dd = snd_soc_dai_get_drvdata(dai);
-
-	clk_disable_unprepare(dd->pclk);
-}
-
 static int mchp_pdmc_dai_probe(struct snd_soc_dai *dai)
 {
 	struct mchp_pdmc *dd = snd_soc_dai_get_drvdata(dai);
@@ -594,11 +579,6 @@ static int mchp_pdmc_hw_params(struct snd_pcm_substream *substream,
 			cfgr_val |= MCHP_PDMC_CFGR_BSSEL(i);
 	}
 
-	if (dd->gclk_enabled) {
-		clk_disable_unprepare(dd->gclk);
-		dd->gclk_enabled = 0;
-	}
-
 	for (osr_start = dd->audio_filter_en ? 64 : 8;
 	     osr_start <= 256 && best_diff_rate; osr_start *= 2) {
 		long round_rate;
@@ -620,8 +600,12 @@ static int mchp_pdmc_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
+	/* CLK is enabled by runtime PM. */
+	clk_disable_unprepare(dd->gclk);
+
 	/* set the rate */
 	ret = clk_set_rate(dd->gclk, gclk_rate);
+	clk_prepare_enable(dd->gclk);
 	if (ret) {
 		dev_err(comp->dev, "unable to set rate %lu to GCLK: %d\n",
 			gclk_rate, ret);
@@ -636,9 +620,6 @@ static int mchp_pdmc_hw_params(struct snd_pcm_substream *substream,
 	mr_val |= MCHP_PDMC_MR_CHUNK(dd->addr.maxburst);
 	dev_dbg(comp->dev, "maxburst set to %d\n", dd->addr.maxburst);
 
-	clk_prepare_enable(dd->gclk);
-	dd->gclk_enabled = 1;
-
 	snd_soc_component_update_bits(comp, MCHP_PDMC_MR,
 				      MCHP_PDMC_MR_OSR_MASK |
 				      MCHP_PDMC_MR_SINCORDER_MASK |
@@ -650,19 +631,6 @@ static int mchp_pdmc_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int mchp_pdmc_hw_free(struct snd_pcm_substream *substream,
-			     struct snd_soc_dai *dai)
-{
-	struct mchp_pdmc *dd = snd_soc_dai_get_drvdata(dai);
-
-	if (dd->gclk_enabled) {
-		clk_disable_unprepare(dd->gclk);
-		dd->gclk_enabled = 0;
-	}
-
-	return 0;
-}
-
 static int mchp_pdmc_trigger(struct snd_pcm_substream *substream,
 			     int cmd, struct snd_soc_dai *dai)
 {
@@ -711,9 +679,7 @@ static int mchp_pdmc_trigger(struct snd_pcm_substream *substream,
 static const struct snd_soc_dai_ops mchp_pdmc_dai_ops = {
 	.set_fmt	= mchp_pdmc_set_fmt,
 	.startup	= mchp_pdmc_startup,
-	.shutdown	= mchp_pdmc_shutdown,
 	.hw_params	= mchp_pdmc_hw_params,
-	.hw_free	= mchp_pdmc_hw_free,
 	.trigger	= mchp_pdmc_trigger,
 };
 
@@ -864,6 +830,7 @@ static const struct regmap_config mchp_pdmc_regmap_config = {
 	.readable_reg	= mchp_pdmc_readable_reg,
 	.writeable_reg	= mchp_pdmc_writeable_reg,
 	.precious_reg	= mchp_pdmc_precious_reg,
+	.cache_type	= REGCACHE_FLAT,
 };
 
 static int mchp_pdmc_dt_init(struct mchp_pdmc *dd)
@@ -970,6 +937,49 @@ static struct snd_dmaengine_pcm_config mchp_pdmc_config = {
 	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
 };
 
+static int mchp_pdmc_runtime_suspend(struct device *dev)
+{
+	struct mchp_pdmc *dd = dev_get_drvdata(dev);
+
+	regcache_cache_only(dd->regmap, true);
+
+	clk_disable_unprepare(dd->gclk);
+	clk_disable_unprepare(dd->pclk);
+
+	return 0;
+}
+
+static int mchp_pdmc_runtime_resume(struct device *dev)
+{
+	struct mchp_pdmc *dd = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(dd->pclk);
+	if (ret) {
+		dev_err(dd->dev,
+			"failed to enable the peripheral clock: %d\n", ret);
+		return ret;
+	}
+	ret = clk_prepare_enable(dd->gclk);
+	if (ret) {
+		dev_err(dd->dev,
+			"failed to enable generic clock: %d\n", ret);
+		goto disable_pclk;
+	}
+
+	regcache_cache_only(dd->regmap, false);
+	regcache_mark_dirty(dd->regmap);
+	ret = regcache_sync(dd->regmap);
+	if (ret) {
+		regcache_cache_only(dd->regmap, true);
+		clk_disable_unprepare(dd->gclk);
+disable_pclk:
+		clk_disable_unprepare(dd->pclk);
+	}
+
+	return ret;
+}
+
 static int mchp_pdmc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1039,18 +1049,25 @@ static int mchp_pdmc_probe(struct platform_device *pdev)
 	dd->addr.addr = (dma_addr_t)res->start + MCHP_PDMC_RHR;
 	platform_set_drvdata(pdev, dd);
 
+	pm_runtime_enable(dd->dev);
+	if (!pm_runtime_enabled(dd->dev)) {
+		ret = mchp_pdmc_runtime_resume(dd->dev);
+		if (ret)
+			return ret;
+	}
+
 	/* register platform */
 	ret = devm_snd_dmaengine_pcm_register(dev, &mchp_pdmc_config, 0);
 	if (ret) {
 		dev_err(dev, "could not register platform: %d\n", ret);
-		return ret;
+		goto pm_runtime_suspend;
 	}
 
 	ret = devm_snd_soc_register_component(dev, &mchp_pdmc_dai_component,
 					      &mchp_pdmc_dai, 1);
 	if (ret) {
 		dev_err(dev, "could not register CPU DAI: %d\n", ret);
-		return ret;
+		goto pm_runtime_suspend;
 	}
 
 	/* print IP version */
@@ -1059,6 +1076,25 @@ static int mchp_pdmc_probe(struct platform_device *pdev)
 		 version & MCHP_PDMC_VER_VERSION);
 
 	return 0;
+
+pm_runtime_suspend:
+	if (!pm_runtime_status_suspended(dd->dev))
+		mchp_pdmc_runtime_suspend(dd->dev);
+	pm_runtime_disable(dd->dev);
+
+	return ret;
+}
+
+static int mchp_pdmc_remove(struct platform_device *pdev)
+{
+	struct mchp_pdmc *dd = platform_get_drvdata(pdev);
+
+	if (!pm_runtime_status_suspended(dd->dev))
+		mchp_pdmc_runtime_suspend(dd->dev);
+
+	pm_runtime_disable(dd->dev);
+
+	return 0;
 }
 
 static const struct of_device_id mchp_pdmc_of_match[] = {
@@ -1070,13 +1106,19 @@ static const struct of_device_id mchp_pdmc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mchp_pdmc_of_match);
 
+static const struct dev_pm_ops mchp_pdmc_pm_ops = {
+	RUNTIME_PM_OPS(mchp_pdmc_runtime_suspend, mchp_pdmc_runtime_resume,
+		       NULL)
+};
+
 static struct platform_driver mchp_pdmc_driver = {
 	.driver	= {
 		.name		= "mchp-pdmc",
 		.of_match_table	= of_match_ptr(mchp_pdmc_of_match),
-		.pm		= &snd_soc_pm_ops,
+		.pm		= pm_ptr(&mchp_pdmc_pm_ops),
 	},
 	.probe	= mchp_pdmc_probe,
+	.remove = mchp_pdmc_remove,
 };
 module_platform_driver(mchp_pdmc_driver);
 
-- 
2.34.1

[PATCH v2 3/4] ASoC: mchp-pdmc: add support for suspend to RAM

[Claudiu Beznea]

Add support for suspend to RAM by re-aranging the lines in switch..case
from mchp_pdmc_trigger() and saving/restoring the enabled interrupts. These
are necessary as AT91 devices has a special power saving mode (called
backup and self-refresh) where most of the SoC parts are powered off
and thus we need to reconfigure the PDMC on resume.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 sound/soc/atmel/mchp-pdmc.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/sound/soc/atmel/mchp-pdmc.c b/sound/soc/atmel/mchp-pdmc.c
index f184404e74e5..cf4084dcbd5e 100644
--- a/sound/soc/atmel/mchp-pdmc.c
+++ b/sound/soc/atmel/mchp-pdmc.c
@@ -113,6 +113,7 @@ struct mchp_pdmc {
 	struct clk *pclk;
 	struct clk *gclk;
 	u32 pdmcen;
+	u32 suspend_irq;
 	int mic_no;
 	int sinc_order;
 	bool audio_filter_en;
@@ -641,22 +642,27 @@ static int mchp_pdmc_trigger(struct snd_pcm_substream *substream,
 #endif
 
 	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_START:
 		/* Enable overrun and underrun error interrupts */
-		regmap_write(dd->regmap, MCHP_PDMC_IER,
+		regmap_write(dd->regmap, MCHP_PDMC_IER, dd->suspend_irq |
 			     MCHP_PDMC_IR_RXOVR | MCHP_PDMC_IR_RXUDR);
+		dd->suspend_irq = 0;
+		fallthrough;
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		snd_soc_component_update_bits(cpu, MCHP_PDMC_MR,
 					      MCHP_PDMC_MR_PDMCEN_MASK,
 					      dd->pdmcen);
 		break;
-	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		regmap_read(dd->regmap, MCHP_PDMC_IMR, &dd->suspend_irq);
+		fallthrough;
+	case SNDRV_PCM_TRIGGER_STOP:
 		/* Disable overrun and underrun error interrupts */
-		regmap_write(dd->regmap, MCHP_PDMC_IDR,
+		regmap_write(dd->regmap, MCHP_PDMC_IDR, dd->suspend_irq |
 			     MCHP_PDMC_IR_RXOVR | MCHP_PDMC_IR_RXUDR);
+		fallthrough;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		snd_soc_component_update_bits(cpu, MCHP_PDMC_MR,
 					      MCHP_PDMC_MR_PDMCEN_MASK, 0);
 		break;
@@ -1107,6 +1113,7 @@ static const struct of_device_id mchp_pdmc_of_match[] = {
 MODULE_DEVICE_TABLE(of, mchp_pdmc_of_match);
 
 static const struct dev_pm_ops mchp_pdmc_pm_ops = {
+	SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
 	RUNTIME_PM_OPS(mchp_pdmc_runtime_suspend, mchp_pdmc_runtime_resume,
 		       NULL)
 };
-- 
2.34.1

[PATCH v2 4/4] ASoC: mchp-spdiftx: use FIELD_PREP() where possible

[Claudiu Beznea]

Use FIELD_PREP() in macro definitions.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 sound/soc/atmel/mchp-spdiftx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/atmel/mchp-spdiftx.c b/sound/soc/atmel/mchp-spdiftx.c
index dc96a6fbf514..20d135c718b0 100644
--- a/sound/soc/atmel/mchp-spdiftx.c
+++ b/sound/soc/atmel/mchp-spdiftx.c
@@ -6,6 +6,7 @@
 //
 // Author: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -71,11 +72,11 @@
 
 /* Valid Bits per Sample */
 #define SPDIFTX_MR_VBPS_MASK		GENMASK(13, 8)
-#define SPDIFTX_MR_VBPS(bps)		(((bps) << 8) & SPDIFTX_MR_VBPS_MASK)
+#define SPDIFTX_MR_VBPS(bps)		FIELD_PREP(SPDIFTX_MR_VBPS_MASK, bps)
 
 /* Chunk Size */
 #define SPDIFTX_MR_CHUNK_MASK		GENMASK(19, 16)
-#define SPDIFTX_MR_CHUNK(size)		(((size) << 16) & SPDIFTX_MR_CHUNK_MASK)
+#define SPDIFTX_MR_CHUNK(size)		FIELD_PREP(SPDIFTX_MR_CHUNK_MASK, size)
 
 /* Validity Bits for Channels 1 and 2 */
 #define SPDIFTX_MR_VALID1			BIT(24)
@@ -88,8 +89,7 @@
 
 /* Bytes per Sample */
 #define SPDIFTX_MR_BPS_MASK		GENMASK(29, 28)
-#define SPDIFTX_MR_BPS(bytes) \
-	((((bytes) - 1) << 28) & SPDIFTX_MR_BPS_MASK)
+#define SPDIFTX_MR_BPS(bytes)		FIELD_PREP(SPDIFTX_MR_BPS_MASK, (bytes - 1))
 
 /*
  * ---- Interrupt Enable/Disable/Mask/Status Register (Write/Read-only) ----
-- 
2.34.1

Re: [PATCH v2 1/4] ASoC: dt-bindings: microchip: use proper naming syntax

[Rob Herring]

On Mon, Dec 12, 2022 at 06:41:50PM +0200, Claudiu Beznea wrote:
> Use the following syntax for Microchip ASoC YAML files:
> vendor,device.yaml
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  .../bindings/sound/mchp,i2s-mcc.yaml          | 108 ------------------

Deleting? Why? That's not what the commit message says.

>  ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} |   0
>  ...rx.yaml => microchip,sama7g5-spdifrx.yaml} |   0
>  ...tx.yaml => microchip,sama7g5-spdiftx.yaml} |   0
>  4 files changed, 108 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
>  rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (100%)
>  rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (100%)
>  rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (100%)

These will all fail binding checks. You need to update the $id values.

Rob

Re: [PATCH v2 1/4] ASoC: dt-bindings: microchip: use proper naming syntax

[Claudiu.Beznea]

On 12.12.2022 19:32, Rob Herring wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Mon, Dec 12, 2022 at 06:41:50PM +0200, Claudiu Beznea wrote:
>> Use the following syntax for Microchip ASoC YAML files:
>> vendor,device.yaml
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  .../bindings/sound/mchp,i2s-mcc.yaml          | 108 ------------------
> 
> Deleting? Why? That's not what the commit message says.

Ah, I messed it up in v2... Will send v3.

> 
>>  ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} |   0
>>  ...rx.yaml => microchip,sama7g5-spdifrx.yaml} |   0
>>  ...tx.yaml => microchip,sama7g5-spdiftx.yaml} |   0
>>  4 files changed, 108 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
>>  rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (100%)
>>  rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (100%)
>>  rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (100%)
> 
> These will all fail binding checks. You need to update the $id values.
> 
> Rob