From: Melody Olvera <quic_molvera@quicinc.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Georgi Djakov <djakov@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Odelu Kukatla <quic_okukatla@quicinc.com>,
<linux-arm-msm@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Melody Olvera <quic_molvera@quicinc.com>
Subject: [PATCH v5 1/2] dt-bindings: interconnect: Add QDU1000/QRU1000 devices
Date: Fri, 16 Dec 2022 15:09:13 -0800 [thread overview]
Message-ID: <20221216230914.21771-2-quic_molvera@quicinc.com> (raw)
In-Reply-To: <20221216230914.21771-1-quic_molvera@quicinc.com>
Add separate schema for QDU1000 and QRU1000 interconnect devices
to document the different NoCs on these platforms.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
.../interconnect/qcom,qdu1000-rpmh.yaml | 70 +++++++++++++
.../interconnect/qcom,qdu1000-rpmh.h | 98 +++++++++++++++++++
2 files changed, 168 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
create mode 100644 include/dt-bindings/interconnect/qcom,qdu1000-rpmh.h
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
new file mode 100644
index 000000000000..dad93b8e4895
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qdu1000-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QDU1000
+
+maintainers:
+ - Georgi Djakov <djakov@kernel.org>
+ - Odelu Kukatla <quic_okukatla@quicinc.com>
+
+description: |
+ RPMh interconnect providers support system bandwidth requirements through
+ RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+ able to communicate with the BCM through the Resource State Coordinator (RSC)
+ associated with each execution environment. Provider nodes must point to at
+ least one RPMh device child node pertaining to their RSC and each provider
+ can map to multiple RPMh resources.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qdu1000-clk-virt
+ - qcom,qdu1000-gem-noc
+ - qcom,qdu1000-mc-virt
+ - qcom,qdu1000-system-noc
+
+ '#interconnect-cells': true
+
+ reg:
+ maxItems: 1
+
+allOf:
+ - $ref: qcom,rpmh-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qdu1000-clk-virt
+ - qcom,qdu1000-mc-virt
+ then:
+ properties:
+ reg: false
+ else:
+ required:
+ - reg
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+
+ system_noc: interconnect@1640000 {
+ compatible = "qcom,qdu1000-system-noc";
+ reg = <0x1640000 0x45080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ clk_virt: interconnect-0 {
+ compatible = "qcom,qdu1000-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
diff --git a/include/dt-bindings/interconnect/qcom,qdu1000-rpmh.h b/include/dt-bindings/interconnect/qcom,qdu1000-rpmh.h
new file mode 100644
index 000000000000..7f0ad1571128
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,qdu1000-rpmh.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QDU1000_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_QDU1000_H
+
+#define MASTER_QUP_CORE_0 0
+#define MASTER_QUP_CORE_1 1
+#define SLAVE_QUP_CORE_0 2
+#define SLAVE_QUP_CORE_1 3
+
+#define MASTER_SYS_TCU 0
+#define MASTER_APPSS_PROC 1
+#define MASTER_GEMNOC_ECPRI_DMA 2
+#define MASTER_FEC_2_GEMNOC 3
+#define MASTER_ANOC_PCIE_GEM_NOC 4
+#define MASTER_SNOC_GC_MEM_NOC 5
+#define MASTER_SNOC_SF_MEM_NOC 6
+#define MASTER_MSS_PROC 7
+#define SLAVE_GEM_NOC_CNOC 8
+#define SLAVE_LLCC 9
+#define SLAVE_GEMNOC_MODEM_CNOC 10
+#define SLAVE_MEM_NOC_PCIE_SNOC 11
+
+#define MASTER_LLCC 0
+#define SLAVE_EBI1 1
+
+#define MASTER_GIC_AHB 0
+#define MASTER_QDSS_BAM 1
+#define MASTER_QPIC 2
+#define MASTER_QSPI_0 3
+#define MASTER_QUP_0 4
+#define MASTER_QUP_1 5
+#define MASTER_SNOC_CFG 6
+#define MASTER_ANOC_SNOC 7
+#define MASTER_ANOC_GSI 8
+#define MASTER_GEM_NOC_CNOC 9
+#define MASTER_GEMNOC_MODEM_CNOC 10
+#define MASTER_GEM_NOC_PCIE_SNOC 11
+#define MASTER_CRYPTO 12
+#define MASTER_ECPRI_GSI 13
+#define MASTER_PIMEM 14
+#define MASTER_SNOC_ECPRI_DMA 15
+#define MASTER_GIC 16
+#define MASTER_PCIE 17
+#define MASTER_QDSS_ETR 18
+#define MASTER_QDSS_ETR_1 19
+#define MASTER_SDCC_1 20
+#define MASTER_USB3 21
+#define SLAVE_AHB2PHY_SOUTH 22
+#define SLAVE_AHB2PHY_NORTH 23
+#define SLAVE_AHB2PHY_EAST 24
+#define SLAVE_AOSS 25
+#define SLAVE_CLK_CTL 26
+#define SLAVE_RBCPR_CX_CFG 27
+#define SLAVE_RBCPR_MX_CFG 28
+#define SLAVE_CRYPTO_0_CFG 29
+#define SLAVE_ECPRI_CFG 30
+#define SLAVE_IMEM_CFG 31
+#define SLAVE_IPC_ROUTER_CFG 32
+#define SLAVE_CNOC_MSS 33
+#define SLAVE_PCIE_CFG 34
+#define SLAVE_PDM 35
+#define SLAVE_PIMEM_CFG 36
+#define SLAVE_PRNG 37
+#define SLAVE_QDSS_CFG 38
+#define SLAVE_QPIC 40
+#define SLAVE_QSPI_0 41
+#define SLAVE_QUP_0 42
+#define SLAVE_QUP_1 43
+#define SLAVE_SDCC_2 44
+#define SLAVE_SMBUS_CFG 45
+#define SLAVE_SNOC_CFG 46
+#define SLAVE_TCSR 47
+#define SLAVE_TLMM 48
+#define SLAVE_TME_CFG 49
+#define SLAVE_TSC_CFG 50
+#define SLAVE_USB3_0 51
+#define SLAVE_VSENSE_CTRL_CFG 52
+#define SLAVE_A1NOC_SNOC 53
+#define SLAVE_ANOC_SNOC_GSI 54
+#define SLAVE_DDRSS_CFG 55
+#define SLAVE_ECPRI_GEMNOC 56
+#define SLAVE_SNOC_GEM_NOC_GC 57
+#define SLAVE_SNOC_GEM_NOC_SF 58
+#define SLAVE_MODEM_OFFLINE 59
+#define SLAVE_ANOC_PCIE_GEM_NOC 60
+#define SLAVE_IMEM 61
+#define SLAVE_PIMEM 62
+#define SLAVE_SERVICE_SNOC 63
+#define SLAVE_ETHERNET_SS 64
+#define SLAVE_PCIE_0 65
+#define SLAVE_QDSS_STM 66
+#define SLAVE_TCU 67
+
+#endif
--
2.38.1
next prev parent reply other threads:[~2022-12-16 23:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-16 23:09 [PATCH v5 0/2] Add interconnect support for QDU1000/QRU1000 SoCs Melody Olvera
2022-12-16 23:09 ` Melody Olvera [this message]
2022-12-20 18:48 ` [PATCH v5 1/2] dt-bindings: interconnect: Add QDU1000/QRU1000 devices Rob Herring
2022-12-21 7:58 ` Krzysztof Kozlowski
2022-12-16 23:09 ` [PATCH v5 2/2] interconnect: qcom: Add QDU1000/QRU1000 interconnect driver Melody Olvera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221216230914.21771-2-quic_molvera@quicinc.com \
--to=quic_molvera@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=quic_okukatla@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).