* [PATCH v5 0/8] LSM: Three basic syscalls
[not found] <20230109180717.58855-1-casey.ref@schaufler-ca.com>
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 1/8] LSM: Identify modules by more than name Casey Schaufler
` (7 more replies)
0 siblings, 8 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Add three system calls for the Linux Security Module ABI.
lsm_get_self_attr() provides the security module specific attributes
that have previously been visible in the /proc/self/attr directory.
For each security module that uses the specified attribute on the
current process the system call will return an LSM identifier and
the value of the attribute. The LSM and attribute identifier values
are defined in include/uapi/linux/lsm.h
LSM identifiers are simple integers and reflect the order in which
the LSM was added to the mainline kernel. This is a convention, not
a promise of the API. LSM identifiers below the value of 100 are
reserved for unspecified future uses. That could include information
about the security infrastructure itself, or about how multiple LSMs
might interact with each other.
lsm_module_list() provides the LSM identifiers, in order, of the
security modules that are active on the system. This has been
available in the securityfs file /sys/kernel/security/lsm.
lsm_set_self_attr() changes the specified LSM attribute. Only one
attribute can be changed at a time, and then only if the specified
security module allows the change.
Patch 0001 changes the LSM registration from passing the name
of the module to passing a lsm_id structure that contains the
name of the module, an LSM identifier number and an attribute
identifier.
Patch 0002 adds the registered lsm_ids to a table.
Patch 0003 changes security_[gs]etprocattr() to use LSM IDs instead
of LSM names.
Patch 0004 implements lsm_get_self_attr().
Patch 0005 implements lsm_module_list().
Patch 0006 implements lsm_set_self_attr().
Patch 0007 wires up the syscalls.
Patch 0008 implements selftests for the three new syscalls.
https://github.com/cschaufler/lsm-stacking.git#lsm-syscalls-6.2-rc2-v5
v5: Correct syscall parameter data types.
v4: Restore "reserved" LSM ID values. Add explaination.
Squash patches that introduce fields in lsm_id.
Correct a wireup error.
v3: Add lsm_set_self_attr().
Rename lsm_self_attr() to lsm_get_self_attr().
Provide the values only for a specifed attribute in
lsm_get_self_attr().
Add selftests for the three new syscalls.
Correct some parameter checking.
v2: Use user-interface safe data types.
Remove "reserved" LSM ID values.
Improve kerneldoc comments
Include copyright dates
Use more descriptive name for LSM counter
Add documentation
Correct wireup errors
Casey Schaufler (8):
LSM: Identify modules by more than name
LSM: Maintain a table of LSM attribute data
proc: Use lsmids instead of lsm names for attrs
LSM: lsm_get_self_attr syscall for LSM self attributes
LSM: Create lsm_module_list system call
LSM: lsm_set_self_attr syscall for LSM self attributes
LSM: wireup Linux Security Module syscalls
LSM: selftests for Linux Security Module syscalls
Documentation/userspace-api/index.rst | 1 +
Documentation/userspace-api/lsm.rst | 70 ++++
arch/alpha/kernel/syscalls/syscall.tbl | 3 +
arch/arm/tools/syscall.tbl | 3 +
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/include/asm/unistd32.h | 6 +
arch/ia64/kernel/syscalls/syscall.tbl | 3 +
arch/m68k/kernel/syscalls/syscall.tbl | 3 +
arch/microblaze/kernel/syscalls/syscall.tbl | 3 +
arch/mips/kernel/syscalls/syscall_n32.tbl | 3 +
arch/mips/kernel/syscalls/syscall_n64.tbl | 3 +
arch/mips/kernel/syscalls/syscall_o32.tbl | 3 +
arch/parisc/kernel/syscalls/syscall.tbl | 3 +
arch/powerpc/kernel/syscalls/syscall.tbl | 3 +
arch/s390/kernel/syscalls/syscall.tbl | 3 +
arch/sh/kernel/syscalls/syscall.tbl | 3 +
arch/sparc/kernel/syscalls/syscall.tbl | 3 +
arch/x86/entry/syscalls/syscall_32.tbl | 3 +
arch/x86/entry/syscalls/syscall_64.tbl | 3 +
arch/xtensa/kernel/syscalls/syscall.tbl | 3 +
fs/proc/base.c | 29 +-
fs/proc/internal.h | 2 +-
include/linux/lsm_hooks.h | 18 +-
include/linux/security.h | 13 +-
include/linux/syscalls.h | 6 +
include/uapi/asm-generic/unistd.h | 11 +-
include/uapi/linux/lsm.h | 76 ++++
kernel/sys_ni.c | 5 +
security/Makefile | 1 +
security/apparmor/lsm.c | 9 +-
security/bpf/hooks.c | 13 +-
security/commoncap.c | 8 +-
security/landlock/cred.c | 2 +-
security/landlock/fs.c | 2 +-
security/landlock/ptrace.c | 2 +-
security/landlock/setup.c | 6 +
security/landlock/setup.h | 1 +
security/loadpin/loadpin.c | 9 +-
security/lockdown/lockdown.c | 8 +-
security/lsm_syscalls.c | 264 ++++++++++++++
security/safesetid/lsm.c | 9 +-
security/security.c | 63 +++-
security/selinux/hooks.c | 11 +-
security/smack/smack_lsm.c | 9 +-
security/tomoyo/tomoyo.c | 9 +-
security/yama/yama_lsm.c | 8 +-
.../arch/mips/entry/syscalls/syscall_n64.tbl | 3 +
.../arch/powerpc/entry/syscalls/syscall.tbl | 3 +
.../perf/arch/s390/entry/syscalls/syscall.tbl | 3 +
.../arch/x86/entry/syscalls/syscall_64.tbl | 3 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/lsm/Makefile | 12 +
tools/testing/selftests/lsm/config | 2 +
.../selftests/lsm/lsm_get_self_attr_test.c | 268 ++++++++++++++
.../selftests/lsm/lsm_module_list_test.c | 149 ++++++++
.../selftests/lsm/lsm_set_self_attr_test.c | 328 ++++++++++++++++++
56 files changed, 1438 insertions(+), 55 deletions(-)
create mode 100644 Documentation/userspace-api/lsm.rst
create mode 100644 include/uapi/linux/lsm.h
create mode 100644 security/lsm_syscalls.c
create mode 100644 tools/testing/selftests/lsm/Makefile
create mode 100644 tools/testing/selftests/lsm/config
create mode 100644 tools/testing/selftests/lsm/lsm_get_self_attr_test.c
create mode 100644 tools/testing/selftests/lsm/lsm_module_list_test.c
create mode 100644 tools/testing/selftests/lsm/lsm_set_self_attr_test.c
--
2.39.0
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH v5 1/8] LSM: Identify modules by more than name
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-11 21:00 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data Casey Schaufler
` (6 subsequent siblings)
7 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Create a struct lsm_id to contain identifying information
about Linux Security Modules (LSMs). At inception this contains
the name of the module, an identifier associated with the security
module and an integer member "attrs_used" which identifies the API
related data associated with each security module. The initial set
of features maps to information that has traditionaly been available
in /proc/self/attr. They are documented in a new userspace-api file.
Change the security_add_hooks() interface to use this structure.
Change the individual modules to maintain their own struct lsm_id
and pass it to security_add_hooks().
The values are for LSM identifiers are defined in a new UAPI
header file linux/lsm.h. Each existing LSM has been updated to
include it's LSMID in the lsm_id.
The LSM ID values are sequential, with the oldest module
LSM_ID_CAPABILITY being the lowest value and the existing modules
numbered in the order they were included in the main line kernel.
This is an arbitrary convention for assigning the values, but
none better presents itself. The value 0 is defined as being invalid.
The values 1-99 are reserved for any special case uses which may
arise in the future. This may include attributes of the LSM
infrastructure itself, possibly related to namespacing or network
attribute management. A special range is identified for such attributes
to help reduce confusion for developers unfamiliar with LSMs.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
---
Documentation/userspace-api/index.rst | 1 +
Documentation/userspace-api/lsm.rst | 55 +++++++++++++++++++++++++++
include/linux/lsm_hooks.h | 18 ++++++++-
include/uapi/linux/lsm.h | 55 +++++++++++++++++++++++++++
security/apparmor/lsm.c | 9 ++++-
security/bpf/hooks.c | 13 ++++++-
security/commoncap.c | 8 +++-
security/landlock/cred.c | 2 +-
security/landlock/fs.c | 2 +-
security/landlock/ptrace.c | 2 +-
security/landlock/setup.c | 6 +++
security/landlock/setup.h | 1 +
security/loadpin/loadpin.c | 9 ++++-
security/lockdown/lockdown.c | 8 +++-
security/safesetid/lsm.c | 9 ++++-
security/security.c | 12 +++---
security/selinux/hooks.c | 11 +++++-
security/smack/smack_lsm.c | 9 ++++-
security/tomoyo/tomoyo.c | 9 ++++-
security/yama/yama_lsm.c | 8 +++-
20 files changed, 226 insertions(+), 21 deletions(-)
create mode 100644 Documentation/userspace-api/lsm.rst
create mode 100644 include/uapi/linux/lsm.h
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index f16337bdb852..54c0f54cde89 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -31,6 +31,7 @@ place where this information is gathered.
sysfs-platform_profile
vduse
futex2
+ lsm
.. only:: subproject and html
diff --git a/Documentation/userspace-api/lsm.rst b/Documentation/userspace-api/lsm.rst
new file mode 100644
index 000000000000..6ddf5506110b
--- /dev/null
+++ b/Documentation/userspace-api/lsm.rst
@@ -0,0 +1,55 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
+.. Copyright (C) 2022 Intel Corporation
+
+=====================================
+Linux Security Modules
+=====================================
+
+:Author: Casey Schaufler
+:Date: November 2022
+
+Linux security modules (LSM) provide a mechanism to implement
+additional access controls to the Linux security policies.
+
+The various security modules may support any of these attributes:
+
+``LSM_ATTR_CURRENT`` is the current, active security context of the
+process.
+The proc filesystem provides this value in ``/proc/self/attr/current``.
+This is supported by the SELinux, Smack and AppArmor security modules.
+Smack also provides this value in ``/proc/self/attr/smack/current``.
+AppArmor also provides this value in ``/proc/self/attr/apparmor/current``.
+
+``LSM_ATTR_EXEC`` is the security context of the process at the time the
+current image was executed.
+The proc filesystem provides this value in ``/proc/self/attr/exec``.
+This is supported by the SELinux and AppArmor security modules.
+AppArmor also provides this value in ``/proc/self/attr/apparmor/exec``.
+
+``LSM_ATTR_FSCREATE`` is the security context of the process used when
+creating file system objects.
+The proc filesystem provides this value in ``/proc/self/attr/fscreate``.
+This is supported by the SELinux security module.
+
+``LSM_ATTR_KEYCREATE`` is the security context of the process used when
+creating key objects.
+The proc filesystem provides this value in ``/proc/self/attr/keycreate``.
+This is supported by the SELinux security module.
+
+``LSM_ATTR_PREV`` is the security context of the process at the time the
+current security context was set.
+The proc filesystem provides this value in ``/proc/self/attr/prev``.
+This is supported by the SELinux and AppArmor security modules.
+AppArmor also provides this value in ``/proc/self/attr/apparmor/prev``.
+
+``LSM_ATTR_SOCKCREATE`` is the security context of the process used when
+creating socket objects.
+The proc filesystem provides this value in ``/proc/self/attr/sockcreate``.
+This is supported by the SELinux security module.
+
+Additional documentation
+========================
+
+* Documentation/security/lsm.rst
+* Documentation/security/lsm-development.rst
diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
index 0a5ba81f7367..6f2cabb79ec4 100644
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1665,6 +1665,20 @@ struct security_hook_heads {
#undef LSM_HOOK
} __randomize_layout;
+/**
+ * struct lsm_id - identify a Linux Security Module.
+ * @lsm: Name of the LSM. Must be approved by the LSM maintainers.
+ * @id: LSM ID number from uapi/linux/lsm.h
+ * @attrs_used: Which attributes this LSM supports.
+ *
+ * Contains the information that identifies the LSM.
+ */
+struct lsm_id {
+ const u8 *lsm;
+ u32 id;
+ u64 attrs_used;
+};
+
/*
* Security module hook list structure.
* For use with generic list macros for common operations.
@@ -1673,7 +1687,7 @@ struct security_hook_list {
struct hlist_node list;
struct hlist_head *head;
union security_list_options hook;
- const char *lsm;
+ struct lsm_id *lsmid;
} __randomize_layout;
/*
@@ -1708,7 +1722,7 @@ extern struct security_hook_heads security_hook_heads;
extern char *lsm_names;
extern void security_add_hooks(struct security_hook_list *hooks, int count,
- const char *lsm);
+ struct lsm_id *lsmid);
#define LSM_FLAG_LEGACY_MAJOR BIT(0)
#define LSM_FLAG_EXCLUSIVE BIT(1)
diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
new file mode 100644
index 000000000000..61a91b7d946f
--- /dev/null
+++ b/include/uapi/linux/lsm.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Linux Security Modules (LSM) - User space API
+ *
+ * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
+ * Copyright (C) 2022 Intel Corporation
+ */
+
+#ifndef _UAPI_LINUX_LSM_H
+#define _UAPI_LINUX_LSM_H
+
+/*
+ * ID values to identify security modules.
+ * A system may use more than one security module.
+ *
+ * A value of 0 is considered invalid.
+ * Values 1-99 are reserved for future use.
+ * The interface is designed to extend to attributes beyond those which
+ * are active today. Currently all the attributes are specific to the
+ * individual modules. The LSM infrastructure itself has no variable state,
+ * but that may change. One proposal would allow loadable modules, in which
+ * case an attribute such as LSM_IS_LOADABLE might identify the dynamic
+ * modules. Another potential attribute could be which security modules is
+ * associated withnetwork labeling using netlabel. Another possible attribute
+ * could be related to stacking behavior in a namespaced environment.
+ * While it would be possible to intermingle the LSM infrastructure attribute
+ * values with the security module provided values, keeping them separate
+ * provides a clearer distinction.
+ */
+#define LSM_ID_CAPABILITY 100
+#define LSM_ID_SELINUX 101
+#define LSM_ID_SMACK 102
+#define LSM_ID_TOMOYO 103
+#define LSM_ID_IMA 104
+#define LSM_ID_APPARMOR 105
+#define LSM_ID_YAMA 106
+#define LSM_ID_LOADPIN 107
+#define LSM_ID_SAFESETID 108
+#define LSM_ID_LOCKDOWN 109
+#define LSM_ID_BPF 110
+#define LSM_ID_LANDLOCK 111
+
+/*
+ * LSM_ATTR_XXX values identify the /proc/.../attr entry that the
+ * context represents. Not all security modules provide all of these
+ * values. Some security modules provide none of them.
+ */
+#define LSM_ATTR_CURRENT 0x0001
+#define LSM_ATTR_EXEC 0x0002
+#define LSM_ATTR_FSCREATE 0x0004
+#define LSM_ATTR_KEYCREATE 0x0008
+#define LSM_ATTR_PREV 0x0010
+#define LSM_ATTR_SOCKCREATE 0x0020
+
+#endif /* _UAPI_LINUX_LSM_H */
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index c6728a629437..63ea2a995987 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -24,6 +24,7 @@
#include <linux/zstd.h>
#include <net/sock.h>
#include <uapi/linux/mount.h>
+#include <uapi/linux/lsm.h>
#include "include/apparmor.h"
#include "include/apparmorfs.h"
@@ -1217,6 +1218,12 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
.lbs_task = sizeof(struct aa_task_ctx),
};
+static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
+ .lsm = "apparmor",
+ .id = LSM_ID_APPARMOR,
+ .attrs_used = LSM_ATTR_CURRENT | LSM_ATTR_PREV | LSM_ATTR_EXEC,
+};
+
static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(ptrace_access_check, apparmor_ptrace_access_check),
LSM_HOOK_INIT(ptrace_traceme, apparmor_ptrace_traceme),
@@ -1912,7 +1919,7 @@ static int __init apparmor_init(void)
goto buffers_out;
}
security_add_hooks(apparmor_hooks, ARRAY_SIZE(apparmor_hooks),
- "apparmor");
+ &apparmor_lsmid);
/* Report that AppArmor successfully initialized */
apparmor_initialized = 1;
diff --git a/security/bpf/hooks.c b/security/bpf/hooks.c
index e5971fa74fd7..20983ae8d31f 100644
--- a/security/bpf/hooks.c
+++ b/security/bpf/hooks.c
@@ -5,6 +5,7 @@
*/
#include <linux/lsm_hooks.h>
#include <linux/bpf_lsm.h>
+#include <uapi/linux/lsm.h>
static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
#define LSM_HOOK(RET, DEFAULT, NAME, ...) \
@@ -15,9 +16,19 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(task_free, bpf_task_storage_free),
};
+/*
+ * slot has to be LSMBLOB_NEEDED because some of the hooks
+ * supplied by this module require a slot.
+ */
+struct lsm_id bpf_lsmid __lsm_ro_after_init = {
+ .lsm = "bpf",
+ .id = LSM_ID_BPF,
+};
+
static int __init bpf_lsm_init(void)
{
- security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks), "bpf");
+ security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks),
+ &bpf_lsmid);
pr_info("LSM support for eBPF active\n");
return 0;
}
diff --git a/security/commoncap.c b/security/commoncap.c
index 1164278b97fd..76c5a0af95d6 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -25,6 +25,7 @@
#include <linux/binfmts.h>
#include <linux/personality.h>
#include <linux/mnt_idmapping.h>
+#include <uapi/linux/lsm.h>
/*
* If a non-root user executes a setuid-root binary in
@@ -1445,6 +1446,11 @@ int cap_mmap_file(struct file *file, unsigned long reqprot,
#ifdef CONFIG_SECURITY
+static struct lsm_id capability_lsmid __lsm_ro_after_init = {
+ .lsm = "capability",
+ .id = LSM_ID_CAPABILITY,
+};
+
static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(capable, cap_capable),
LSM_HOOK_INIT(settime, cap_settime),
@@ -1469,7 +1475,7 @@ static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
static int __init capability_init(void)
{
security_add_hooks(capability_hooks, ARRAY_SIZE(capability_hooks),
- "capability");
+ &capability_lsmid);
return 0;
}
diff --git a/security/landlock/cred.c b/security/landlock/cred.c
index ec6c37f04a19..2eb1d65f10d6 100644
--- a/security/landlock/cred.c
+++ b/security/landlock/cred.c
@@ -42,5 +42,5 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
__init void landlock_add_cred_hooks(void)
{
security_add_hooks(landlock_hooks, ARRAY_SIZE(landlock_hooks),
- LANDLOCK_NAME);
+ &landlock_lsmid);
}
diff --git a/security/landlock/fs.c b/security/landlock/fs.c
index adcea0fe7e68..fa0e6e76991c 100644
--- a/security/landlock/fs.c
+++ b/security/landlock/fs.c
@@ -1307,5 +1307,5 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
__init void landlock_add_fs_hooks(void)
{
security_add_hooks(landlock_hooks, ARRAY_SIZE(landlock_hooks),
- LANDLOCK_NAME);
+ &landlock_lsmid);
}
diff --git a/security/landlock/ptrace.c b/security/landlock/ptrace.c
index 4c5b9cd71286..eab35808f395 100644
--- a/security/landlock/ptrace.c
+++ b/security/landlock/ptrace.c
@@ -116,5 +116,5 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
__init void landlock_add_ptrace_hooks(void)
{
security_add_hooks(landlock_hooks, ARRAY_SIZE(landlock_hooks),
- LANDLOCK_NAME);
+ &landlock_lsmid);
}
diff --git a/security/landlock/setup.c b/security/landlock/setup.c
index 3f196d2ce4f9..9104133d04ca 100644
--- a/security/landlock/setup.c
+++ b/security/landlock/setup.c
@@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
#include "common.h"
#include "cred.h"
@@ -24,6 +25,11 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
.lbs_superblock = sizeof(struct landlock_superblock_security),
};
+struct lsm_id landlock_lsmid __lsm_ro_after_init = {
+ .lsm = LANDLOCK_NAME,
+ .id = LSM_ID_LANDLOCK,
+};
+
static int __init landlock_init(void)
{
landlock_add_cred_hooks();
diff --git a/security/landlock/setup.h b/security/landlock/setup.h
index 1daffab1ab4b..38bce5b172dc 100644
--- a/security/landlock/setup.h
+++ b/security/landlock/setup.h
@@ -14,5 +14,6 @@
extern bool landlock_initialized;
extern struct lsm_blob_sizes landlock_blob_sizes;
+extern struct lsm_id landlock_lsmid;
#endif /* _SECURITY_LANDLOCK_SETUP_H */
diff --git a/security/loadpin/loadpin.c b/security/loadpin/loadpin.c
index 110a5ab2b46b..d5c1373a096d 100644
--- a/security/loadpin/loadpin.c
+++ b/security/loadpin/loadpin.c
@@ -20,6 +20,7 @@
#include <linux/string_helpers.h>
#include <linux/dm-verity-loadpin.h>
#include <uapi/linux/loadpin.h>
+#include <uapi/linux/lsm.h>
#define VERITY_DIGEST_FILE_HEADER "# LOADPIN_TRUSTED_VERITY_ROOT_DIGESTS"
@@ -203,6 +204,11 @@ static int loadpin_load_data(enum kernel_load_data_id id, bool contents)
return loadpin_check(NULL, (enum kernel_read_file_id) id);
}
+static struct lsm_id loadpin_lsmid __lsm_ro_after_init = {
+ .lsm = "loadpin",
+ .id = LSM_ID_LOADPIN,
+};
+
static struct security_hook_list loadpin_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(sb_free_security, loadpin_sb_free_security),
LSM_HOOK_INIT(kernel_read_file, loadpin_read_file),
@@ -250,7 +256,8 @@ static int __init loadpin_init(void)
pr_info("ready to pin (currently %senforcing)\n",
enforce ? "" : "not ");
parse_exclude();
- security_add_hooks(loadpin_hooks, ARRAY_SIZE(loadpin_hooks), "loadpin");
+ security_add_hooks(loadpin_hooks, ARRAY_SIZE(loadpin_hooks),
+ &loadpin_lsmid);
return 0;
}
diff --git a/security/lockdown/lockdown.c b/security/lockdown/lockdown.c
index a79b985e917e..e8c41a0caf7d 100644
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -13,6 +13,7 @@
#include <linux/security.h>
#include <linux/export.h>
#include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
static enum lockdown_reason kernel_locked_down;
@@ -75,6 +76,11 @@ static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(locked_down, lockdown_is_locked_down),
};
+static struct lsm_id lockdown_lsmid __lsm_ro_after_init = {
+ .lsm = "lockdown",
+ .id = LSM_ID_LOCKDOWN,
+};
+
static int __init lockdown_lsm_init(void)
{
#if defined(CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY)
@@ -83,7 +89,7 @@ static int __init lockdown_lsm_init(void)
lock_kernel_down("Kernel configuration", LOCKDOWN_CONFIDENTIALITY_MAX);
#endif
security_add_hooks(lockdown_hooks, ARRAY_SIZE(lockdown_hooks),
- "lockdown");
+ &lockdown_lsmid);
return 0;
}
diff --git a/security/safesetid/lsm.c b/security/safesetid/lsm.c
index e806739f7868..8d0742ba045d 100644
--- a/security/safesetid/lsm.c
+++ b/security/safesetid/lsm.c
@@ -19,6 +19,7 @@
#include <linux/ptrace.h>
#include <linux/sched/task_stack.h>
#include <linux/security.h>
+#include <uapi/linux/lsm.h>
#include "lsm.h"
/* Flag indicating whether initialization completed */
@@ -261,6 +262,11 @@ static int safesetid_task_fix_setgroups(struct cred *new, const struct cred *old
return 0;
}
+static struct lsm_id safesetid_lsmid __lsm_ro_after_init = {
+ .lsm = "safesetid",
+ .id = LSM_ID_SAFESETID,
+};
+
static struct security_hook_list safesetid_security_hooks[] = {
LSM_HOOK_INIT(task_fix_setuid, safesetid_task_fix_setuid),
LSM_HOOK_INIT(task_fix_setgid, safesetid_task_fix_setgid),
@@ -271,7 +277,8 @@ static struct security_hook_list safesetid_security_hooks[] = {
static int __init safesetid_security_init(void)
{
security_add_hooks(safesetid_security_hooks,
- ARRAY_SIZE(safesetid_security_hooks), "safesetid");
+ ARRAY_SIZE(safesetid_security_hooks),
+ &safesetid_lsmid);
/* Report that SafeSetID successfully initialized */
safesetid_initialized = 1;
diff --git a/security/security.c b/security/security.c
index d1571900a8c7..07a8fe7f92bf 100644
--- a/security/security.c
+++ b/security/security.c
@@ -504,17 +504,17 @@ static int lsm_append(const char *new, char **result)
* security_add_hooks - Add a modules hooks to the hook lists.
* @hooks: the hooks to add
* @count: the number of hooks to add
- * @lsm: the name of the security module
+ * @lsmid: the identification information for the security module
*
* Each LSM has to register its hooks with the infrastructure.
*/
void __init security_add_hooks(struct security_hook_list *hooks, int count,
- const char *lsm)
+ struct lsm_id *lsmid)
{
int i;
for (i = 0; i < count; i++) {
- hooks[i].lsm = lsm;
+ hooks[i].lsmid = lsmid;
hlist_add_tail_rcu(&hooks[i].list, hooks[i].head);
}
@@ -523,7 +523,7 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
* and fix this up afterwards.
*/
if (slab_is_available()) {
- if (lsm_append(lsm, &lsm_names) < 0)
+ if (lsm_append(lsmid->lsm, &lsm_names) < 0)
panic("%s - Cannot get early memory.\n", __func__);
}
}
@@ -2145,7 +2145,7 @@ int security_getprocattr(struct task_struct *p, const char *lsm,
struct security_hook_list *hp;
hlist_for_each_entry(hp, &security_hook_heads.getprocattr, list) {
- if (lsm != NULL && strcmp(lsm, hp->lsm))
+ if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
continue;
return hp->hook.getprocattr(p, name, value);
}
@@ -2158,7 +2158,7 @@ int security_setprocattr(const char *lsm, const char *name, void *value,
struct security_hook_list *hp;
hlist_for_each_entry(hp, &security_hook_heads.setprocattr, list) {
- if (lsm != NULL && strcmp(lsm, hp->lsm))
+ if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
continue;
return hp->hook.setprocattr(name, value, size);
}
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 3c5be76a9199..7398819a0036 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -92,6 +92,7 @@
#include <linux/fsnotify.h>
#include <linux/fanotify.h>
#include <linux/io_uring.h>
+#include <uapi/linux/lsm.h>
#include "avc.h"
#include "objsec.h"
@@ -7032,6 +7033,13 @@ static int selinux_uring_cmd(struct io_uring_cmd *ioucmd)
}
#endif /* CONFIG_IO_URING */
+static struct lsm_id selinux_lsmid __lsm_ro_after_init = {
+ .lsm = "selinux",
+ .id = LSM_ID_SELINUX,
+ .attrs_used = LSM_ATTR_CURRENT | LSM_ATTR_EXEC | LSM_ATTR_FSCREATE |
+ LSM_ATTR_KEYCREATE | LSM_ATTR_PREV | LSM_ATTR_SOCKCREATE,
+};
+
/*
* IMPORTANT NOTE: When adding new hooks, please be careful to keep this order:
* 1. any hooks that don't belong to (2.) or (3.) below,
@@ -7355,7 +7363,8 @@ static __init int selinux_init(void)
hashtab_cache_init();
- security_add_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks), "selinux");
+ security_add_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks),
+ &selinux_lsmid);
if (avc_add_callback(selinux_netcache_avc_callback, AVC_CALLBACK_RESET))
panic("SELinux: Unable to register AVC netcache callback\n");
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 9a82a15685d1..8918b52cff43 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -43,6 +43,7 @@
#include <linux/fs_parser.h>
#include <linux/watch_queue.h>
#include <linux/io_uring.h>
+#include <uapi/linux/lsm.h>
#include "smack.h"
#define TRANS_TRUE "TRUE"
@@ -4856,6 +4857,12 @@ struct lsm_blob_sizes smack_blob_sizes __lsm_ro_after_init = {
.lbs_superblock = sizeof(struct superblock_smack),
};
+static struct lsm_id smack_lsmid __lsm_ro_after_init = {
+ .lsm = "smack",
+ .id = LSM_ID_SMACK,
+ .attrs_used = LSM_ATTR_CURRENT,
+};
+
static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(ptrace_access_check, smack_ptrace_access_check),
LSM_HOOK_INIT(ptrace_traceme, smack_ptrace_traceme),
@@ -5062,7 +5069,7 @@ static __init int smack_init(void)
/*
* Register with LSM
*/
- security_add_hooks(smack_hooks, ARRAY_SIZE(smack_hooks), "smack");
+ security_add_hooks(smack_hooks, ARRAY_SIZE(smack_hooks), &smack_lsmid);
smack_enabled = 1;
pr_info("Smack: Initializing.\n");
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index af04a7b7eb28..a4658fb5ef0e 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -6,6 +6,7 @@
*/
#include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
#include "common.h"
/**
@@ -542,6 +543,11 @@ static void tomoyo_task_free(struct task_struct *task)
}
}
+static struct lsm_id tomoyo_lsmid __lsm_ro_after_init = {
+ .lsm = "tomoyo",
+ .id = LSM_ID_TOMOYO,
+};
+
/*
* tomoyo_security_ops is a "struct security_operations" which is used for
* registering TOMOYO.
@@ -595,7 +601,8 @@ static int __init tomoyo_init(void)
struct tomoyo_task *s = tomoyo_task(current);
/* register ourselves with the security framework */
- security_add_hooks(tomoyo_hooks, ARRAY_SIZE(tomoyo_hooks), "tomoyo");
+ security_add_hooks(tomoyo_hooks, ARRAY_SIZE(tomoyo_hooks),
+ &tomoyo_lsmid);
pr_info("TOMOYO Linux initialized\n");
s->domain_info = &tomoyo_kernel_domain;
atomic_inc(&tomoyo_kernel_domain.users);
diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c
index 06e226166aab..2487b8f847f3 100644
--- a/security/yama/yama_lsm.c
+++ b/security/yama/yama_lsm.c
@@ -18,6 +18,7 @@
#include <linux/task_work.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
+#include <uapi/linux/lsm.h>
#define YAMA_SCOPE_DISABLED 0
#define YAMA_SCOPE_RELATIONAL 1
@@ -421,6 +422,11 @@ static int yama_ptrace_traceme(struct task_struct *parent)
return rc;
}
+static struct lsm_id yama_lsmid __lsm_ro_after_init = {
+ .lsm = "yama",
+ .id = LSM_ID_YAMA,
+};
+
static struct security_hook_list yama_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(ptrace_access_check, yama_ptrace_access_check),
LSM_HOOK_INIT(ptrace_traceme, yama_ptrace_traceme),
@@ -477,7 +483,7 @@ static inline void yama_init_sysctl(void) { }
static int __init yama_init(void)
{
pr_info("Yama: becoming mindful.\n");
- security_add_hooks(yama_hooks, ARRAY_SIZE(yama_hooks), "yama");
+ security_add_hooks(yama_hooks, ARRAY_SIZE(yama_hooks), &yama_lsmid);
yama_init_sysctl();
return 0;
}
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 1/8] LSM: Identify modules by more than name Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-11 1:58 ` kernel test robot
2023-01-11 21:01 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs Casey Schaufler
` (5 subsequent siblings)
7 siblings, 2 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
As LSMs are registered add their lsm_id pointers to a table.
This will be used later for attribute reporting.
Determine the number of possible security modules based on
their respective CONFIG options. This allows the number to be
known at build time. This allows data structures and tables
to use the constant.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
---
include/linux/security.h | 2 ++
security/security.c | 44 +++++++++++++++++++++++++++++++++-------
2 files changed, 39 insertions(+), 7 deletions(-)
diff --git a/include/linux/security.h b/include/linux/security.h
index 5b67f208f7de..33ed1860b96f 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -138,6 +138,8 @@ enum lockdown_reason {
};
extern const char *const lockdown_reasons[LOCKDOWN_CONFIDENTIALITY_MAX+1];
+extern u32 lsm_active_cnt;
+extern struct lsm_id *lsm_idlist[];
/* These functions are in security/commoncap.c */
extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
diff --git a/security/security.c b/security/security.c
index 07a8fe7f92bf..a590fa98ddd6 100644
--- a/security/security.c
+++ b/security/security.c
@@ -28,12 +28,29 @@
#include <linux/backing-dev.h>
#include <linux/string.h>
#include <linux/msg.h>
+#include <uapi/linux/lsm.h>
#include <net/flow.h>
#define MAX_LSM_EVM_XATTR 2
-/* How many LSMs were built into the kernel? */
-#define LSM_COUNT (__end_lsm_info - __start_lsm_info)
+/*
+ * How many LSMs are built into the kernel as determined at
+ * build time. Used to determine fixed array sizes.
+ * The capability module is accounted for by CONFIG_SECURITY
+ */
+#define LSM_COUNT ( \
+ (IS_ENABLED(CONFIG_SECURITY) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_SELINUX) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_SMACK) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_TOMOYO) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_IMA) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_APPARMOR) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_YAMA) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_LOADPIN) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_SAFESETID) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_LOCKDOWN_LSM) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_BPF_LSM) ? 1 : 0) + \
+ (IS_ENABLED(CONFIG_SECURITY_LANDLOCK) ? 1 : 0))
/*
* These are descriptions of the reasons that can be passed to the
@@ -90,7 +107,7 @@ static __initdata const char *chosen_major_lsm;
static __initconst const char * const builtin_lsm_order = CONFIG_LSM;
/* Ordered list of LSMs to initialize. */
-static __initdata struct lsm_info **ordered_lsms;
+static __initdata struct lsm_info *ordered_lsms[LSM_COUNT + 1];
static __initdata struct lsm_info *exclusive;
static __initdata bool debug;
@@ -341,13 +358,16 @@ static void __init report_lsm_order(void)
pr_cont("\n");
}
+/*
+ * Current index to use while initializing the lsm id list.
+ */
+u32 lsm_active_cnt __lsm_ro_after_init;
+struct lsm_id *lsm_idlist[LSM_COUNT] __lsm_ro_after_init;
+
static void __init ordered_lsm_init(void)
{
struct lsm_info **lsm;
- ordered_lsms = kcalloc(LSM_COUNT + 1, sizeof(*ordered_lsms),
- GFP_KERNEL);
-
if (chosen_lsm_order) {
if (chosen_major_lsm) {
pr_warn("security=%s is ignored because it is superseded by lsm=%s\n",
@@ -388,7 +408,7 @@ static void __init ordered_lsm_init(void)
for (lsm = ordered_lsms; *lsm; lsm++)
initialize_lsm(*lsm);
- kfree(ordered_lsms);
+ init_debug("lsm count = %d\n", lsm_active_cnt);
}
int __init early_security_init(void)
@@ -513,6 +533,16 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
{
int i;
+ /*
+ * A security module may call security_add_hooks() more
+ * than once. Landlock is one such case.
+ */
+ if (lsm_active_cnt == 0 || lsm_idlist[lsm_active_cnt - 1] != lsmid)
+ lsm_idlist[lsm_active_cnt++] = lsmid;
+
+ if (lsm_active_cnt > LSM_COUNT)
+ panic("%s Too many LSMs registered.\n", __func__);
+
for (i = 0; i < count; i++) {
hooks[i].lsmid = lsmid;
hlist_add_tail_rcu(&hooks[i].list, hooks[i].head);
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 1/8] LSM: Identify modules by more than name Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-11 21:01 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
` (4 subsequent siblings)
7 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic,
linux-fsdevel
Use the LSM ID number instead of the LSM name to identify which
security module's attibute data should be shown in /proc/self/attr.
The security_[gs]etprocattr() functions have been changed to expect
the LSM ID. The change from a string comparison to an integer comparison
in these functions will provide a minor performance improvement.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: linux-fsdevel@vger.kernel.org
---
fs/proc/base.c | 29 +++++++++++++++--------------
fs/proc/internal.h | 2 +-
include/linux/security.h | 11 +++++------
security/security.c | 11 +++++------
4 files changed, 26 insertions(+), 27 deletions(-)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 9e479d7d202b..9328b6b07dfc 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -96,6 +96,7 @@
#include <linux/time_namespace.h>
#include <linux/resctrl.h>
#include <linux/cn_proc.h>
+#include <uapi/linux/lsm.h>
#include <trace/events/oom.h>
#include "internal.h"
#include "fd.h"
@@ -145,10 +146,10 @@ struct pid_entry {
NOD(NAME, (S_IFREG|(MODE)), \
NULL, &proc_single_file_operations, \
{ .proc_show = show } )
-#define ATTR(LSM, NAME, MODE) \
+#define ATTR(LSMID, NAME, MODE) \
NOD(NAME, (S_IFREG|(MODE)), \
NULL, &proc_pid_attr_operations, \
- { .lsm = LSM })
+ { .lsmid = LSMID })
/*
* Count the number of hardlinks for the pid_entry table, excluding the .
@@ -2730,7 +2731,7 @@ static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
if (!task)
return -ESRCH;
- length = security_getprocattr(task, PROC_I(inode)->op.lsm,
+ length = security_getprocattr(task, PROC_I(inode)->op.lsmid,
file->f_path.dentry->d_name.name,
&p);
put_task_struct(task);
@@ -2788,7 +2789,7 @@ static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf,
if (rv < 0)
goto out_free;
- rv = security_setprocattr(PROC_I(inode)->op.lsm,
+ rv = security_setprocattr(PROC_I(inode)->op.lsmid,
file->f_path.dentry->d_name.name, page,
count);
mutex_unlock(¤t->signal->cred_guard_mutex);
@@ -2837,27 +2838,27 @@ static const struct inode_operations proc_##LSM##_attr_dir_inode_ops = { \
#ifdef CONFIG_SECURITY_SMACK
static const struct pid_entry smack_attr_dir_stuff[] = {
- ATTR("smack", "current", 0666),
+ ATTR(LSM_ID_SMACK, "current", 0666),
};
LSM_DIR_OPS(smack);
#endif
#ifdef CONFIG_SECURITY_APPARMOR
static const struct pid_entry apparmor_attr_dir_stuff[] = {
- ATTR("apparmor", "current", 0666),
- ATTR("apparmor", "prev", 0444),
- ATTR("apparmor", "exec", 0666),
+ ATTR(LSM_ID_APPARMOR, "current", 0666),
+ ATTR(LSM_ID_APPARMOR, "prev", 0444),
+ ATTR(LSM_ID_APPARMOR, "exec", 0666),
};
LSM_DIR_OPS(apparmor);
#endif
static const struct pid_entry attr_dir_stuff[] = {
- ATTR(NULL, "current", 0666),
- ATTR(NULL, "prev", 0444),
- ATTR(NULL, "exec", 0666),
- ATTR(NULL, "fscreate", 0666),
- ATTR(NULL, "keycreate", 0666),
- ATTR(NULL, "sockcreate", 0666),
+ ATTR(0, "current", 0666),
+ ATTR(0, "prev", 0444),
+ ATTR(0, "exec", 0666),
+ ATTR(0, "fscreate", 0666),
+ ATTR(0, "keycreate", 0666),
+ ATTR(0, "sockcreate", 0666),
#ifdef CONFIG_SECURITY_SMACK
DIR("smack", 0555,
proc_smack_attr_dir_inode_ops, proc_smack_attr_dir_ops),
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index b701d0207edf..18db9722c81b 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -92,7 +92,7 @@ union proc_op {
int (*proc_show)(struct seq_file *m,
struct pid_namespace *ns, struct pid *pid,
struct task_struct *task);
- const char *lsm;
+ int lsmid;
};
struct proc_inode {
diff --git a/include/linux/security.h b/include/linux/security.h
index 33ed1860b96f..2d09e818a7d1 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -475,10 +475,9 @@ int security_sem_semctl(struct kern_ipc_perm *sma, int cmd);
int security_sem_semop(struct kern_ipc_perm *sma, struct sembuf *sops,
unsigned nsops, int alter);
void security_d_instantiate(struct dentry *dentry, struct inode *inode);
-int security_getprocattr(struct task_struct *p, const char *lsm, const char *name,
+int security_getprocattr(struct task_struct *p, int lsmid, const char *name,
char **value);
-int security_setprocattr(const char *lsm, const char *name, void *value,
- size_t size);
+int security_setprocattr(int lsmid, const char *name, void *value, size_t size);
int security_netlink_send(struct sock *sk, struct sk_buff *skb);
int security_ismaclabel(const char *name);
int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen);
@@ -1346,14 +1345,14 @@ static inline void security_d_instantiate(struct dentry *dentry,
struct inode *inode)
{ }
-static inline int security_getprocattr(struct task_struct *p, const char *lsm,
+static inline int security_getprocattr(struct task_struct *p, int lsmid,
const char *name, char **value)
{
return -EINVAL;
}
-static inline int security_setprocattr(const char *lsm, char *name,
- void *value, size_t size)
+static inline int security_setprocattr(int lsmid, char *name, void *value,
+ size_t size)
{
return -EINVAL;
}
diff --git a/security/security.c b/security/security.c
index a590fa98ddd6..a0f4af2da5f3 100644
--- a/security/security.c
+++ b/security/security.c
@@ -2169,26 +2169,25 @@ void security_d_instantiate(struct dentry *dentry, struct inode *inode)
}
EXPORT_SYMBOL(security_d_instantiate);
-int security_getprocattr(struct task_struct *p, const char *lsm,
- const char *name, char **value)
+int security_getprocattr(struct task_struct *p, int lsmid, const char *name,
+ char **value)
{
struct security_hook_list *hp;
hlist_for_each_entry(hp, &security_hook_heads.getprocattr, list) {
- if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
+ if (lsmid != 0 && lsmid != hp->lsmid->id)
continue;
return hp->hook.getprocattr(p, name, value);
}
return LSM_RET_DEFAULT(getprocattr);
}
-int security_setprocattr(const char *lsm, const char *name, void *value,
- size_t size)
+int security_setprocattr(int lsmid, const char *name, void *value, size_t size)
{
struct security_hook_list *hp;
hlist_for_each_entry(hp, &security_hook_heads.setprocattr, list) {
- if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
+ if (lsmid != 0 && lsmid != hp->lsmid->id)
continue;
return hp->hook.setprocattr(name, value, size);
}
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
` (2 preceding siblings ...)
2023-01-09 18:07 ` [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-11 21:07 ` Paul Moore
` (3 more replies)
2023-01-09 18:07 ` [PATCH v5 5/8] LSM: Create lsm_module_list system call Casey Schaufler
` (3 subsequent siblings)
7 siblings, 4 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Create a system call lsm_get_self_attr() to provide the security
module maintained attributes of the current process. Historically
these attributes have been exposed to user space via entries in
procfs under /proc/self/attr.
Attributes are provided as a collection of lsm_ctx structures
which are placed into a user supplied buffer. Each structure
identifys the size of the attribute, and the attribute value.
The format of the attribute value is defined by the security
module, but will always be \0 terminated. The ctx_len value
will always be strlen(ctx)+1.
---------------------------
| __u32 id |
---------------------------
| __u64 flags |
---------------------------
| __kernel_size_t ctx_len |
---------------------------
| __u8 ctx[ctx_len] |
---------------------------
| __u32 id |
---------------------------
| __u64 flags |
---------------------------
| __kernel_size_t ctx_len |
---------------------------
| __u8 ctx[ctx_len] |
---------------------------
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
---
Documentation/userspace-api/lsm.rst | 9 ++
include/linux/syscalls.h | 3 +
include/uapi/linux/lsm.h | 21 ++++
kernel/sys_ni.c | 3 +
security/Makefile | 1 +
security/lsm_syscalls.c | 182 ++++++++++++++++++++++++++++
6 files changed, 219 insertions(+)
create mode 100644 security/lsm_syscalls.c
diff --git a/Documentation/userspace-api/lsm.rst b/Documentation/userspace-api/lsm.rst
index 6ddf5506110b..98a0c191b499 100644
--- a/Documentation/userspace-api/lsm.rst
+++ b/Documentation/userspace-api/lsm.rst
@@ -48,6 +48,15 @@ creating socket objects.
The proc filesystem provides this value in ``/proc/self/attr/sockcreate``.
This is supported by the SELinux security module.
+Kernel interface
+================
+
+Get the security attributes of the current process
+--------------------------------------------------
+
+.. kernel-doc:: security/lsm_syscalls.c
+ :identifiers: sys_lsm_get_self_attr
+
Additional documentation
========================
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 33a0ee3bcb2e..a89205c70ffa 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -71,6 +71,7 @@ struct clone_args;
struct open_how;
struct mount_attr;
struct landlock_ruleset_attr;
+struct lsm_ctx;
enum landlock_rule_type;
#include <linux/types.h>
@@ -1058,6 +1059,8 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
unsigned long home_node,
unsigned long flags);
+asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
+ int flags);
/*
* Architecture-specific system calls
diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
index 61a91b7d946f..8674d8c6b326 100644
--- a/include/uapi/linux/lsm.h
+++ b/include/uapi/linux/lsm.h
@@ -9,6 +9,27 @@
#ifndef _UAPI_LINUX_LSM_H
#define _UAPI_LINUX_LSM_H
+#include <linux/types.h>
+#include <linux/unistd.h>
+
+/**
+ * struct lsm_ctx - LSM context
+ * @id: the LSM id number, see LSM_ID_XXX
+ * @flags: context specifier and LSM specific flags
+ * @ctx_len: the size of @ctx
+ * @ctx: the LSM context, a nul terminated string
+ *
+ * @ctx in a nul terminated string.
+ * (strlen(@ctx) < @ctx_len) is always true.
+ * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
+ */
+struct lsm_ctx {
+ __u32 id;
+ __u64 flags;
+ __kernel_size_t ctx_len;
+ __u8 ctx[];
+};
+
/*
* ID values to identify security modules.
* A system may use more than one security module.
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 860b2dcf3ac4..7b2513d5605d 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -262,6 +262,9 @@ COND_SYSCALL_COMPAT(recvmsg);
/* mm/nommu.c, also with MMU */
COND_SYSCALL(mremap);
+/* security/lsm_syscalls.c */
+COND_SYSCALL(lsm_get_self_attr);
+
/* security/keys/keyctl.c */
COND_SYSCALL(add_key);
COND_SYSCALL(request_key);
diff --git a/security/Makefile b/security/Makefile
index 18121f8f85cd..59f238490665 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_KEYS) += keys/
# always enable default capabilities
obj-y += commoncap.o
+obj-$(CONFIG_SECURITY) += lsm_syscalls.o
obj-$(CONFIG_MMU) += min_addr.o
# Object file lists
diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
new file mode 100644
index 000000000000..55e8bf61ac8a
--- /dev/null
+++ b/security/lsm_syscalls.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * System calls implementing the Linux Security Module API.
+ *
+ * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
+ * Copyright (C) 2022 Intel Corporation
+ */
+
+#include <asm/current.h>
+#include <linux/compiler_types.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/security.h>
+#include <linux/stddef.h>
+#include <linux/syscalls.h>
+#include <linux/types.h>
+#include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
+
+struct attrs_used_map {
+ char *name;
+ int attrs_used;
+};
+
+static const struct attrs_used_map lsm_attr_names[] = {
+ { .name = "current", .attrs_used = LSM_ATTR_CURRENT, },
+ { .name = "exec", .attrs_used = LSM_ATTR_EXEC, },
+ { .name = "fscreate", .attrs_used = LSM_ATTR_FSCREATE, },
+ { .name = "keycreate", .attrs_used = LSM_ATTR_KEYCREATE, },
+ { .name = "prev", .attrs_used = LSM_ATTR_PREV, },
+ { .name = "sockcreate", .attrs_used = LSM_ATTR_SOCKCREATE, },
+};
+
+static int attr_used_index(u32 flags)
+{
+ int i;
+
+ if (flags == 0)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
+ if ((lsm_attr_names[i].attrs_used & flags) == flags)
+ return i;
+
+ return -EINVAL;
+}
+
+/**
+ * sys_lsm_get_self_attr - Return current task's security module attributes
+ * @ctx: the LSM contexts
+ * @size: size of @ctx, updated on return
+ * @flags: which attribute to return
+ *
+ * Returns the calling task's LSM contexts. On success this
+ * function returns the number of @ctx array elements. This value
+ * may be zero if there are no LSM contexts assigned. If @size is
+ * insufficient to contain the return data -E2BIG is returned and
+ * @size is set to the minimum required size. In all other cases
+ * a negative value indicating the error is returned.
+ */
+SYSCALL_DEFINE3(lsm_get_self_attr,
+ struct lsm_ctx __user *, ctx,
+ size_t __user *, size,
+ u32, flags)
+{
+ int i;
+ int rc = 0;
+ int len;
+ int attr;
+ int count = 0;
+ void *curr;
+ char *cp;
+ char *np;
+ char **interum_ctx;
+ size_t total_size = 0;
+ struct lsm_ctx *ip;
+ struct lsm_ctx *interum;
+ struct lsm_ctx *final = NULL;
+
+ attr = attr_used_index(flags);
+ if (attr < 0)
+ return attr;
+
+ interum = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
+ sizeof(*interum), GFP_KERNEL);
+ if (interum == NULL)
+ return -ENOMEM;
+ ip = interum;
+
+ interum_ctx = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
+ sizeof(*interum_ctx), GFP_KERNEL);
+ if (interum_ctx == NULL) {
+ kfree(interum);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < lsm_active_cnt; i++) {
+ if ((lsm_idlist[i]->attrs_used &
+ lsm_attr_names[attr].attrs_used) == 0)
+ continue;
+
+ len = security_getprocattr(current, lsm_idlist[i]->id,
+ lsm_attr_names[attr].name,
+ &cp);
+ if (len <= 0)
+ continue;
+
+ ip->id = lsm_idlist[i]->id;
+ ip->flags = lsm_attr_names[attr].attrs_used;
+ interum_ctx[count] = cp;
+
+ /*
+ * A security module that returns a binary attribute
+ * will need to identify itself to prevent string
+ * processing.
+ *
+ * At least one security module adds a \n at the
+ * end of a context to make it look nicer. Change
+ * that to a \0 so that user space doesn't have to
+ * work around it.
+ *
+ * Security modules have been inconsistent about
+ * including the \0 terminator in the size. If it's
+ * not there make space for it.
+ *
+ * The length returned will reflect the length of
+ * the string provided by the security module, which
+ * may not match what getprocattr returned.
+ */
+ np = strnchr(cp, len, '\n');
+ if (np != NULL)
+ *np = '\0';
+ ip->ctx_len = strnlen(cp, len) + 1;
+ total_size += sizeof(*interum) + ip->ctx_len;
+ ip++;
+ count++;
+ }
+
+ if (count == 0)
+ goto free_out;
+
+ final = kzalloc(total_size, GFP_KERNEL);
+ if (final == NULL) {
+ rc = -ENOMEM;
+ goto free_out;
+ }
+
+ curr = final;
+ ip = interum;
+ for (i = 0; i < count; i++) {
+ memcpy(curr, ip, sizeof(*interum));
+ curr += sizeof(*interum);
+ if (ip->ctx_len > 1)
+ memcpy(curr, interum_ctx[i], ip->ctx_len - 1);
+ curr += ip->ctx_len;
+ ip++;
+ }
+
+ if (get_user(len, size)) {
+ rc = -EFAULT;
+ goto free_out;
+ }
+ if (total_size > len) {
+ rc = -ERANGE;
+ if (put_user(total_size, size) != 0)
+ rc = -EFAULT;
+ goto free_out;
+ }
+ if (copy_to_user(ctx, final, total_size) != 0 ||
+ put_user(total_size, size) != 0)
+ rc = -EFAULT;
+ else
+ rc = count;
+
+free_out:
+ for (i = 0; i < count; i++)
+ kfree(interum_ctx[i]);
+ kfree(interum_ctx);
+ kfree(interum);
+ kfree(final);
+ return rc;
+}
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 5/8] LSM: Create lsm_module_list system call
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
` (3 preceding siblings ...)
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-11 0:50 ` kernel test robot
2023-01-11 21:07 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 6/8] LSM: lsm_set_self_attr syscall for LSM self attributes Casey Schaufler
` (2 subsequent siblings)
7 siblings, 2 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Create a system call to report the list of Linux Security Modules
that are active on the system. The list is provided as an array
of LSM ID numbers.
The calling application can use this list determine what LSM
specific actions it might take. That might include chosing an
output format, determining required privilege or bypassing
security module specific behavior.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
---
Documentation/userspace-api/lsm.rst | 3 +++
include/linux/syscalls.h | 1 +
kernel/sys_ni.c | 1 +
security/lsm_syscalls.c | 41 +++++++++++++++++++++++++++++
4 files changed, 46 insertions(+)
diff --git a/Documentation/userspace-api/lsm.rst b/Documentation/userspace-api/lsm.rst
index 98a0c191b499..e342d75b99ab 100644
--- a/Documentation/userspace-api/lsm.rst
+++ b/Documentation/userspace-api/lsm.rst
@@ -57,6 +57,9 @@ Get the security attributes of the current process
.. kernel-doc:: security/lsm_syscalls.c
:identifiers: sys_lsm_get_self_attr
+.. kernel-doc:: security/lsm_syscalls.c
+ :identifiers: sys_lsm_module_list
+
Additional documentation
========================
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a89205c70ffa..9eb4cb6bbeb1 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -1061,6 +1061,7 @@ asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long l
unsigned long flags);
asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
int flags);
+asmlinkage long sys_lsm_module_list(u32 *ids, size_t *size, int flags);
/*
* Architecture-specific system calls
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 7b2513d5605d..af1fd28c0420 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -264,6 +264,7 @@ COND_SYSCALL(mremap);
/* security/lsm_syscalls.c */
COND_SYSCALL(lsm_get_self_attr);
+COND_SYSCALL(lsm_module_list);
/* security/keys/keyctl.c */
COND_SYSCALL(add_key);
diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
index 55e8bf61ac8a..92af1fcaa654 100644
--- a/security/lsm_syscalls.c
+++ b/security/lsm_syscalls.c
@@ -180,3 +180,44 @@ SYSCALL_DEFINE3(lsm_get_self_attr,
kfree(final);
return rc;
}
+
+/**
+ * sys_lsm_module_list - Return a list of the active security modules
+ * @ids: the LSM module ids
+ * @size: size of @ids, updated on return
+ * @flags: reserved for future use, must be zero
+ *
+ * Returns a list of the active LSM ids. On success this function
+ * returns the number of @ids array elements. This value may be zero
+ * if there are no LSMs active. If @size is insufficient to contain
+ * the return data -E2BIG is returned and @size is set to the minimum
+ * required size. In all other cases a negative value indicating the
+ * error is returned.
+ */
+SYSCALL_DEFINE3(lsm_module_list,
+ u32 __user *, ids,
+ size_t __user *, size,
+ u64, flags)
+{
+ size_t total_size = lsm_active_cnt * sizeof(*ids);
+ size_t usize;
+ int i;
+
+ if (flags)
+ return -EINVAL;
+
+ if (get_user(usize, size))
+ return -EFAULT;
+
+ if (put_user(total_size, size) != 0)
+ return -EFAULT;
+
+ if (usize < total_size)
+ return -E2BIG;
+
+ for (i = 0; i < lsm_active_cnt; i++)
+ if (put_user(lsm_idlist[i]->id, ids++))
+ return -EFAULT;
+
+ return lsm_active_cnt;
+}
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 6/8] LSM: lsm_set_self_attr syscall for LSM self attributes
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
` (4 preceding siblings ...)
2023-01-09 18:07 ` [PATCH v5 5/8] LSM: Create lsm_module_list system call Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 7/8] LSM: wireup Linux Security Module syscalls Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 8/8] LSM: selftests for " Casey Schaufler
7 siblings, 0 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Create a system call lsm_set_self_attr() to set a security
module maintained attribute of the current process. Historically
these attributes have been exposed to user space via entries in
procfs under /proc/self/attr.
The attribute value is provided in a lsm_ctx structure. The structure
identifys the size of the attribute, and the attribute value. The format
of the attribute value is defined by the security module, but will always
be \0 terminated if it is a string. The ctx_len value must always be
strlen(ctx)+1 if the value is a string. The flags field is reserved for
future security module specific use and must be 0.
---------------------------
| __u32 id |
---------------------------
| __u64 flags |
---------------------------
| __kernel_size_t ctx_len |
---------------------------
| __u8 ctx[ctx_len] |
---------------------------
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
---
Documentation/userspace-api/lsm.rst | 3 +++
include/linux/syscalls.h | 2 ++
kernel/sys_ni.c | 1 +
security/lsm_syscalls.c | 41 +++++++++++++++++++++++++++++
4 files changed, 47 insertions(+)
diff --git a/Documentation/userspace-api/lsm.rst b/Documentation/userspace-api/lsm.rst
index e342d75b99ab..c7da13801305 100644
--- a/Documentation/userspace-api/lsm.rst
+++ b/Documentation/userspace-api/lsm.rst
@@ -57,6 +57,9 @@ Get the security attributes of the current process
.. kernel-doc:: security/lsm_syscalls.c
:identifiers: sys_lsm_get_self_attr
+.. kernel-doc:: security/lsm_syscalls.c
+ :identifiers: sys_lsm_set_self_attr
+
.. kernel-doc:: security/lsm_syscalls.c
:identifiers: sys_lsm_module_list
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 9eb4cb6bbeb1..a9f1ec9942af 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -1062,6 +1062,8 @@ asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long l
asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
int flags);
asmlinkage long sys_lsm_module_list(u32 *ids, size_t *size, int flags);
+asmlinkage long sys_lsm_set_self_attr(struct lsm_ctx *ctx, size_t size,
+ int flags);
/*
* Architecture-specific system calls
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index af1fd28c0420..c3884c1c7339 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -265,6 +265,7 @@ COND_SYSCALL(mremap);
/* security/lsm_syscalls.c */
COND_SYSCALL(lsm_get_self_attr);
COND_SYSCALL(lsm_module_list);
+COND_SYSCALL(lsm_set_self_attr);
/* security/keys/keyctl.c */
COND_SYSCALL(add_key);
diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
index 92af1fcaa654..026a86674a1f 100644
--- a/security/lsm_syscalls.c
+++ b/security/lsm_syscalls.c
@@ -181,6 +181,47 @@ SYSCALL_DEFINE3(lsm_get_self_attr,
return rc;
}
+/**
+ * sys_lsm_set_self_attr - Set current task's security module attribute
+ * @ctx: the LSM contexts
+ * @size: size of @ctx
+ * @flags: which attribute to set
+ *
+ * Sets the calling task's LSM context. On success this function
+ * returns 0. If the attribute specified cannot be set a negative
+ * value indicating the reason for the error is returned.
+ */
+SYSCALL_DEFINE3(lsm_set_self_attr,
+ struct lsm_ctx __user *, ctx,
+ size_t, size,
+ u32, flags)
+{
+ int rc = -EINVAL;
+ int attr;
+ void *page;
+ struct lsm_ctx *ip;
+
+ if (size > PAGE_SIZE)
+ return -E2BIG;
+ if (size <= sizeof(*ip))
+ return -EINVAL;
+
+ attr = attr_used_index(flags);
+ if (attr < 0)
+ return attr;
+
+ page = memdup_user(ctx, size);
+ if (IS_ERR(page))
+ return PTR_ERR(page);
+
+ ip = page;
+ if (sizeof(*ip) + ip->ctx_len <= size)
+ rc = security_setprocattr(ip->id, lsm_attr_names[attr].name,
+ ip->ctx, ip->ctx_len);
+ kfree(page);
+ return (rc > 0) ? 0 : rc;
+}
+
/**
* sys_lsm_module_list - Return a list of the active security modules
* @ids: the LSM module ids
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 7/8] LSM: wireup Linux Security Module syscalls
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
` (5 preceding siblings ...)
2023-01-09 18:07 ` [PATCH v5 6/8] LSM: lsm_set_self_attr syscall for LSM self attributes Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
2023-01-13 9:31 ` Geert Uytterhoeven
2023-01-09 18:07 ` [PATCH v5 8/8] LSM: selftests for " Casey Schaufler
7 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Wireup lsm_get_self_attr, lsm_set_self_attr and lsm_module_list
system calls.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: linux-api@vger.kernel.org
---
arch/alpha/kernel/syscalls/syscall.tbl | 3 +++
arch/arm/tools/syscall.tbl | 3 +++
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/include/asm/unistd32.h | 6 ++++++
arch/ia64/kernel/syscalls/syscall.tbl | 3 +++
arch/m68k/kernel/syscalls/syscall.tbl | 3 +++
arch/microblaze/kernel/syscalls/syscall.tbl | 3 +++
arch/mips/kernel/syscalls/syscall_n32.tbl | 3 +++
arch/mips/kernel/syscalls/syscall_n64.tbl | 3 +++
arch/mips/kernel/syscalls/syscall_o32.tbl | 3 +++
arch/parisc/kernel/syscalls/syscall.tbl | 3 +++
arch/powerpc/kernel/syscalls/syscall.tbl | 3 +++
arch/s390/kernel/syscalls/syscall.tbl | 3 +++
arch/sh/kernel/syscalls/syscall.tbl | 3 +++
arch/sparc/kernel/syscalls/syscall.tbl | 3 +++
arch/x86/entry/syscalls/syscall_32.tbl | 3 +++
arch/x86/entry/syscalls/syscall_64.tbl | 3 +++
arch/xtensa/kernel/syscalls/syscall.tbl | 3 +++
include/uapi/asm-generic/unistd.h | 11 ++++++++++-
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl | 3 +++
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl | 3 +++
tools/perf/arch/s390/entry/syscalls/syscall.tbl | 3 +++
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 3 +++
23 files changed, 77 insertions(+), 2 deletions(-)
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 8ebacf37a8cf..002e6a39fcb1 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -490,3 +490,6 @@
558 common process_mrelease sys_process_mrelease
559 common futex_waitv sys_futex_waitv
560 common set_mempolicy_home_node sys_ni_syscall
+561 common lsm_get_self_attr sys_lsm_get_self_attr
+562 common lsm_module_list sys_lsm_module_list
+563 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index ac964612d8b0..dca80a2d3927 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -464,3 +464,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 037feba03a51..6a28fb91b85d 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -39,7 +39,7 @@
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5)
#define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800)
-#define __NR_compat_syscalls 451
+#define __NR_compat_syscalls 454
#endif
#define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 604a2053d006..cb4b3149024d 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -907,6 +907,12 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease)
__SYSCALL(__NR_futex_waitv, sys_futex_waitv)
#define __NR_set_mempolicy_home_node 450
__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
+#define __NR_lsm_get_self_attr 451
+__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
+#define __NR_lsm_module_list 452
+__SYSCALL(__NR_lsm_module_list, sys_module_list)
+#define __NR_lsm_set_self_attr 453
+__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
/*
* Please add new compat syscalls above this comment and update
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index 72c929d9902b..1a5d560a1317 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -371,3 +371,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index b1f3940bc298..0b7b01c90315 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -450,3 +450,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 820145e47350..b69d57014c7b 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -456,3 +456,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index 253ff994ed2e..7c1ca6241b90 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -389,3 +389,6 @@
448 n32 process_mrelease sys_process_mrelease
449 n32 futex_waitv sys_futex_waitv
450 n32 set_mempolicy_home_node sys_set_mempolicy_home_node
+451 n32 lsm_get_self_attr sys_lsm_get_self_attr
+452 n32 lsm_module_list sys_lsm_module_list
+453 n32 lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index 3f1886ad9d80..99453966d179 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -365,3 +365,6 @@
448 n64 process_mrelease sys_process_mrelease
449 n64 futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 n64 lsm_get_self_attr sys_lsm_get_self_attr
+452 n64 lsm_module_list sys_lsm_module_list
+453 n64 lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 8f243e35a7b2..4ddb0ff66793 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -438,3 +438,6 @@
448 o32 process_mrelease sys_process_mrelease
449 o32 futex_waitv sys_futex_waitv
450 o32 set_mempolicy_home_node sys_set_mempolicy_home_node
+451 o32 lsm_get_self_attr sys_lsm_get_self_attr
+452 o32 lsm_module_list sys_lsm_module_list
+453 032 lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 0e42fceb2d5e..5ab1a5b22d8e 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -448,3 +448,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index a0be127475b1..8d31bb83d6a2 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -537,3 +537,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index 799147658dee..bb7597be2e4f 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -453,3 +453,6 @@
448 common process_mrelease sys_process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index 2de85c977f54..43d468742916 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -453,3 +453,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index 4398cc6fb68d..c7791c7bdde4 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -496,3 +496,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index 320480a8db4f..4f2e6577466e 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -455,3 +455,6 @@
448 i386 process_mrelease sys_process_mrelease
449 i386 futex_waitv sys_futex_waitv
450 i386 set_mempolicy_home_node sys_set_mempolicy_home_node
+451 i386 lsm_get_self_attr sys_lsm_get_self_attr
+452 i386 lsm_module_list sys_lsm_module_list
+453 i386 lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index c84d12608cd2..3a7866f72042 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -372,6 +372,9 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
#
# Due to a historical design error, certain syscalls are numbered differently
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 52c94ab5c205..e0a5b61c1f1a 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -421,3 +421,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 45fa180cc56a..3659b2b02f5a 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -886,8 +886,17 @@ __SYSCALL(__NR_futex_waitv, sys_futex_waitv)
#define __NR_set_mempolicy_home_node 450
__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
+#define __NR_lsm_get_self_attr 451
+__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
+
+#define __NR_lsm_module_list 452
+__SYSCALL(__NR_lsm_module_list, sys_lsm_module_list)
+
+#define __NR_lsm_set_self_attr 453
+__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
+
#undef __NR_syscalls
-#define __NR_syscalls 451
+#define __NR_syscalls 454
/*
* 32 bit systems traditionally used different
diff --git a/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl b/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl
index 3f1886ad9d80..99453966d179 100644
--- a/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl
+++ b/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl
@@ -365,3 +365,6 @@
448 n64 process_mrelease sys_process_mrelease
449 n64 futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 n64 lsm_get_self_attr sys_lsm_get_self_attr
+452 n64 lsm_module_list sys_lsm_module_list
+453 n64 lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
index a0be127475b1..8d31bb83d6a2 100644
--- a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
+++ b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
@@ -537,3 +537,6 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/tools/perf/arch/s390/entry/syscalls/syscall.tbl b/tools/perf/arch/s390/entry/syscalls/syscall.tbl
index 799147658dee..d69bd5550b46 100644
--- a/tools/perf/arch/s390/entry/syscalls/syscall.tbl
+++ b/tools/perf/arch/s390/entry/syscalls/syscall.tbl
@@ -453,3 +453,6 @@
448 common process_mrelease sys_process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr sys_lsm_set_self_attr
diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
index c84d12608cd2..3a7866f72042 100644
--- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
@@ -372,6 +372,9 @@
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common lsm_get_self_attr sys_lsm_get_self_attr
+452 common lsm_module_list sys_lsm_module_list
+453 common lsm_set_self_attr sys_lsm_set_self_attr
#
# Due to a historical design error, certain syscalls are numbered differently
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH v5 8/8] LSM: selftests for Linux Security Module syscalls
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
` (6 preceding siblings ...)
2023-01-09 18:07 ` [PATCH v5 7/8] LSM: wireup Linux Security Module syscalls Casey Schaufler
@ 2023-01-09 18:07 ` Casey Schaufler
7 siblings, 0 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-09 18:07 UTC (permalink / raw)
To: casey.schaufler, paul, linux-security-module
Cc: casey, jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, mic
Add selftests for the three system calls supporting the LSM
infrastructure.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
---
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/lsm/Makefile | 12 +
tools/testing/selftests/lsm/config | 2 +
.../selftests/lsm/lsm_get_self_attr_test.c | 268 ++++++++++++++
.../selftests/lsm/lsm_module_list_test.c | 149 ++++++++
.../selftests/lsm/lsm_set_self_attr_test.c | 328 ++++++++++++++++++
6 files changed, 760 insertions(+)
create mode 100644 tools/testing/selftests/lsm/Makefile
create mode 100644 tools/testing/selftests/lsm/config
create mode 100644 tools/testing/selftests/lsm/lsm_get_self_attr_test.c
create mode 100644 tools/testing/selftests/lsm/lsm_module_list_test.c
create mode 100644 tools/testing/selftests/lsm/lsm_set_self_attr_test.c
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 41b649452560..ea58c5018529 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -37,6 +37,7 @@ TARGETS += landlock
TARGETS += lib
TARGETS += livepatch
TARGETS += lkdtm
+TARGETS += lsm
TARGETS += membarrier
TARGETS += memfd
TARGETS += memory-hotplug
diff --git a/tools/testing/selftests/lsm/Makefile b/tools/testing/selftests/lsm/Makefile
new file mode 100644
index 000000000000..d567ea9756ea
--- /dev/null
+++ b/tools/testing/selftests/lsm/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# First run: make -C ../../../.. headers_install
+
+CFLAGS += -Wall -O2 $(KHDR_INCLUDES)
+
+TEST_GEN_PROGS := lsm_get_self_attr_test lsm_module_list_test \
+ lsm_set_self_attr_test
+
+include ../lib.mk
+
+$(TEST_GEN_PROGS):
diff --git a/tools/testing/selftests/lsm/config b/tools/testing/selftests/lsm/config
new file mode 100644
index 000000000000..afb887715f64
--- /dev/null
+++ b/tools/testing/selftests/lsm/config
@@ -0,0 +1,2 @@
+CONFIG_SYSFS=y
+CONFIG_SECURITY=y
diff --git a/tools/testing/selftests/lsm/lsm_get_self_attr_test.c b/tools/testing/selftests/lsm/lsm_get_self_attr_test.c
new file mode 100644
index 000000000000..6f7f72c25cda
--- /dev/null
+++ b/tools/testing/selftests/lsm/lsm_get_self_attr_test.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux Security Module infrastructure tests
+ * Tests for the lsm_get_self_attr system call
+ *
+ * Copyright © 2022 Casey Schaufler <casey@schaufler-ca.com>
+ * Copyright © 2022 Intel Corporation
+ */
+
+#define _GNU_SOURCE
+#include <linux/lsm.h>
+#include <string.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include "../kselftest_harness.h"
+
+#define PROCATTR "/proc/self/attr/"
+
+static int read_proc_attr(const char *attr, char *value, __kernel_size_t size)
+{
+ FILE *fp;
+ int len;
+ char *path;
+
+ len = strlen(PROCATTR) + strlen(attr) + 1;
+ path = calloc(len, 1);
+ if (path == NULL)
+ return -1;
+ sprintf(path, "%s%s", PROCATTR, attr);
+
+ fp = fopen(path, "r");
+ free(path);
+
+ if (fp == NULL)
+ return -1;
+ if (fread(value, 1, size, fp) <= 0)
+ return -1;
+ fclose(fp);
+
+ path = strchr(value, '\n');
+ if (path)
+ *path = '\0';
+
+ return 0;
+}
+
+static struct lsm_ctx *next_ctx(struct lsm_ctx *ctxp)
+{
+ void *vp;
+
+ vp = (void *)ctxp + sizeof(*ctxp) + ctxp->ctx_len;
+ return (struct lsm_ctx *)vp;
+}
+
+TEST(size_null_lsm_get_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *ctx = calloc(page_size, 1);
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_EQ(-1, syscall(__NR_lsm_get_self_attr, ctx, NULL,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(EFAULT, errno);
+
+ free(ctx);
+}
+
+TEST(ctx_null_lsm_get_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ __kernel_size_t size = page_size;
+
+ ASSERT_EQ(-1, syscall(__NR_lsm_get_self_attr, NULL, &size,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(EFAULT, errno);
+ ASSERT_NE(1, size);
+}
+
+TEST(size_too_small_lsm_get_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *ctx = calloc(page_size, 1);
+ __kernel_size_t size = 1;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_EQ(-1, syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(ERANGE, errno);
+ ASSERT_NE(1, size);
+
+ free(ctx);
+}
+
+TEST(flags_zero_lsm_get_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *ctx = calloc(page_size, 1);
+ __kernel_size_t size = page_size;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_EQ(-1, syscall(__NR_lsm_get_self_attr, ctx, &size, 0));
+ ASSERT_EQ(EINVAL, errno);
+ ASSERT_EQ(page_size, size);
+
+ free(ctx);
+}
+
+TEST(flags_overset_lsm_get_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *ctx = calloc(page_size, 1);
+ __kernel_size_t size = page_size;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_EQ(-1, syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_CURRENT | LSM_ATTR_PREV));
+ ASSERT_EQ(EINVAL, errno);
+ ASSERT_EQ(page_size, size);
+
+ free(ctx);
+}
+
+TEST(basic_lsm_get_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ __kernel_size_t size = page_size;
+ struct lsm_ctx *ctx = calloc(page_size, 1);
+ struct lsm_ctx *tctx = NULL;
+ __u32 *syscall_lsms = calloc(page_size, 1);
+ char *attr = calloc(page_size, 1);
+ int cnt_current = 0;
+ int cnt_exec = 0;
+ int cnt_fscreate = 0;
+ int cnt_keycreate = 0;
+ int cnt_prev = 0;
+ int cnt_sockcreate = 0;
+ int lsmcount;
+ int count;
+ int i;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_NE(NULL, syscall_lsms);
+
+ lsmcount = syscall(__NR_lsm_module_list, syscall_lsms, &size, 0);
+ ASSERT_LE(1, lsmcount);
+
+ for (i = 0; i < lsmcount; i++) {
+ switch (syscall_lsms[i]) {
+ case LSM_ID_SELINUX:
+ cnt_current++;
+ cnt_exec++;
+ cnt_fscreate++;
+ cnt_keycreate++;
+ cnt_prev++;
+ cnt_sockcreate++;
+ break;
+ case LSM_ID_SMACK:
+ cnt_current++;
+ break;
+ case LSM_ID_APPARMOR:
+ cnt_current++;
+ cnt_exec++;
+ cnt_prev++;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (cnt_current) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_CURRENT);
+ ASSERT_EQ(cnt_current, count);
+ tctx = ctx;
+ ASSERT_EQ(0, read_proc_attr("current", attr, page_size));
+ ASSERT_EQ(0, strcmp((char *)tctx->ctx, attr));
+ for (i = 1; i < count; i++) {
+ tctx = next_ctx(tctx);
+ ASSERT_NE(0, strcmp((char *)tctx->ctx, attr));
+ }
+ }
+ if (cnt_exec) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_EXEC);
+ ASSERT_GE(cnt_exec, count);
+ if (count > 0) {
+ tctx = ctx;
+ ASSERT_EQ(0, read_proc_attr("exec", attr, page_size));
+ ASSERT_EQ(0, strcmp((char *)tctx->ctx, attr));
+ }
+ for (i = 1; i < count; i++) {
+ tctx = next_ctx(tctx);
+ ASSERT_NE(0, strcmp((char *)tctx->ctx, attr));
+ }
+ }
+ if (cnt_fscreate) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_FSCREATE);
+ ASSERT_GE(cnt_fscreate, count);
+ if (count > 0) {
+ tctx = ctx;
+ ASSERT_EQ(0, read_proc_attr("fscreate", attr,
+ page_size));
+ ASSERT_EQ(0, strcmp((char *)tctx->ctx, attr));
+ }
+ for (i = 1; i < count; i++) {
+ tctx = next_ctx(tctx);
+ ASSERT_NE(0, strcmp((char *)tctx->ctx, attr));
+ }
+ }
+ if (cnt_keycreate) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_KEYCREATE);
+ ASSERT_GE(cnt_keycreate, count);
+ if (count > 0) {
+ tctx = ctx;
+ ASSERT_EQ(0, read_proc_attr("keycreate", attr,
+ page_size));
+ ASSERT_EQ(0, strcmp((char *)tctx->ctx, attr));
+ }
+ for (i = 1; i < count; i++) {
+ tctx = next_ctx(tctx);
+ ASSERT_NE(0, strcmp((char *)tctx->ctx, attr));
+ }
+ }
+ if (cnt_prev) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_PREV);
+ ASSERT_GE(cnt_prev, count);
+ if (count > 0) {
+ tctx = ctx;
+ ASSERT_EQ(0, read_proc_attr("prev", attr, page_size));
+ ASSERT_EQ(0, strcmp((char *)tctx->ctx, attr));
+ for (i = 1; i < count; i++) {
+ tctx = next_ctx(tctx);
+ ASSERT_NE(0, strcmp((char *)tctx->ctx, attr));
+ }
+ }
+ }
+ if (cnt_sockcreate) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_SOCKCREATE);
+ ASSERT_GE(cnt_sockcreate, count);
+ if (count > 0) {
+ tctx = ctx;
+ ASSERT_EQ(0, read_proc_attr("sockcreate", attr,
+ page_size));
+ ASSERT_EQ(0, strcmp((char *)tctx->ctx, attr));
+ }
+ for (i = 1; i < count; i++) {
+ tctx = next_ctx(tctx);
+ ASSERT_NE(0, strcmp((char *)tctx->ctx, attr));
+ }
+ }
+
+ free(ctx);
+ free(attr);
+ free(syscall_lsms);
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/lsm/lsm_module_list_test.c b/tools/testing/selftests/lsm/lsm_module_list_test.c
new file mode 100644
index 000000000000..c5675598b2a4
--- /dev/null
+++ b/tools/testing/selftests/lsm/lsm_module_list_test.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux Security Module infrastructure tests
+ * Tests for the lsm_module_list system call
+ *
+ * Copyright © 2022 Casey Schaufler <casey@schaufler-ca.com>
+ * Copyright © 2022 Intel Corporation
+ */
+
+#define _GNU_SOURCE
+#include <linux/lsm.h>
+#include <string.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include "../kselftest_harness.h"
+
+static int read_sysfs_lsms(char *lsms, __kernel_size_t size)
+{
+ FILE *fp;
+
+ fp = fopen("/sys/kernel/security/lsm", "r");
+ if (fp == NULL)
+ return -1;
+ if (fread(lsms, 1, size, fp) <= 0)
+ return -1;
+ fclose(fp);
+ return 0;
+}
+
+TEST(size_null_lsm_module_list)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *syscall_lsms = calloc(page_size, 1);
+
+ ASSERT_NE(NULL, syscall_lsms);
+ ASSERT_EQ(-1, syscall(__NR_lsm_module_list, syscall_lsms, NULL, 0));
+ ASSERT_EQ(EFAULT, errno);
+
+ free(syscall_lsms);
+}
+
+TEST(ids_null_lsm_module_list)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ __kernel_size_t size = page_size;
+
+ ASSERT_EQ(-1, syscall(__NR_lsm_module_list, NULL, &size, 0));
+ ASSERT_EQ(EFAULT, errno);
+ ASSERT_NE(1, size);
+}
+
+TEST(size_too_small_lsm_module_list)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *syscall_lsms = calloc(page_size, 1);
+ __kernel_size_t size = 1;
+
+ ASSERT_NE(NULL, syscall_lsms);
+ ASSERT_EQ(-1, syscall(__NR_lsm_module_list, syscall_lsms, &size, 0));
+ ASSERT_EQ(E2BIG, errno);
+ ASSERT_NE(1, size);
+
+ free(syscall_lsms);
+}
+
+TEST(flags_set_lsm_module_list)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *syscall_lsms = calloc(page_size, 1);
+ __kernel_size_t size = page_size;
+
+ ASSERT_NE(NULL, syscall_lsms);
+ ASSERT_EQ(-1, syscall(__NR_lsm_module_list, syscall_lsms, &size, 7));
+ ASSERT_EQ(EINVAL, errno);
+ ASSERT_EQ(page_size, size);
+
+ free(syscall_lsms);
+}
+
+TEST(correct_lsm_module_list)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ __kernel_size_t size = page_size;
+ __u32 *syscall_lsms = calloc(page_size, 1);
+ char *sysfs_lsms = calloc(page_size, 1);
+ char *name;
+ char *cp;
+ int count;
+ int i;
+
+ ASSERT_NE(NULL, sysfs_lsms);
+ ASSERT_NE(NULL, syscall_lsms);
+ ASSERT_EQ(0, read_sysfs_lsms(sysfs_lsms, page_size));
+
+ count = syscall(__NR_lsm_module_list, syscall_lsms, &size, 0);
+ ASSERT_LE(1, count);
+ cp = sysfs_lsms;
+ for (i = 0; i < count; i++) {
+ switch (syscall_lsms[i]) {
+ case LSM_ID_CAPABILITY:
+ name = "capability";
+ break;
+ case LSM_ID_SELINUX:
+ name = "selinux";
+ break;
+ case LSM_ID_SMACK:
+ name = "smack";
+ break;
+ case LSM_ID_TOMOYO:
+ name = "tomoyo";
+ break;
+ case LSM_ID_IMA:
+ name = "ima";
+ break;
+ case LSM_ID_APPARMOR:
+ name = "apparmor";
+ break;
+ case LSM_ID_YAMA:
+ name = "yama";
+ break;
+ case LSM_ID_LOADPIN:
+ name = "loadpin";
+ break;
+ case LSM_ID_SAFESETID:
+ name = "safesetid";
+ break;
+ case LSM_ID_LOCKDOWN:
+ name = "lockdown";
+ break;
+ case LSM_ID_BPF:
+ name = "bpf";
+ break;
+ case LSM_ID_LANDLOCK:
+ name = "landlock";
+ break;
+ default:
+ name = "INVALID";
+ break;
+ }
+ ASSERT_EQ(0, strncmp(cp, name, strlen(name)));
+ cp += strlen(name) + 1;
+ }
+
+ free(sysfs_lsms);
+ free(syscall_lsms);
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/lsm/lsm_set_self_attr_test.c b/tools/testing/selftests/lsm/lsm_set_self_attr_test.c
new file mode 100644
index 000000000000..86f8a5952471
--- /dev/null
+++ b/tools/testing/selftests/lsm/lsm_set_self_attr_test.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux Security Module infrastructure tests
+ * Tests for the lsm_set_self_attr system call
+ *
+ * Copyright © 2022 Casey Schaufler <casey@schaufler-ca.com>
+ * Copyright © 2022 Intel Corporation
+ */
+
+#define _GNU_SOURCE
+#include <linux/lsm.h>
+#include <string.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include "../kselftest_harness.h"
+
+static struct lsm_ctx *next_ctx(struct lsm_ctx *tctx)
+{
+ void *vp;
+
+ vp = (void *)tctx + sizeof(*tctx) + tctx->ctx_len;
+ return (struct lsm_ctx *)vp;
+}
+
+TEST(ctx_null_lsm_set_self_attr)
+{
+ ASSERT_EQ(-1, syscall(__NR_lsm_set_self_attr, NULL, _SC_PAGESIZE,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(EFAULT, errno);
+}
+
+TEST(size_too_small_lsm_set_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ struct lsm_ctx *ctx = calloc(page_size, 1);
+ __kernel_size_t size = page_size;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_GE(1, syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(-1, syscall(__NR_lsm_set_self_attr, ctx, 1,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(EINVAL, errno);
+
+ free(ctx);
+}
+
+TEST(flags_zero_lsm_set_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *ctx = calloc(page_size, 1);
+ __kernel_size_t size = page_size;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_GE(1, syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(-1, syscall(__NR_lsm_set_self_attr, ctx, size, 0));
+ ASSERT_EQ(EINVAL, errno);
+
+ free(ctx);
+}
+
+TEST(flags_overset_lsm_set_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ char *ctx = calloc(page_size, 1);
+ __kernel_size_t size = page_size;
+ struct lsm_ctx *tctx = (struct lsm_ctx *)ctx;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_GE(1, syscall(__NR_lsm_get_self_attr, tctx, &size,
+ LSM_ATTR_CURRENT));
+ ASSERT_EQ(-1, syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_CURRENT | LSM_ATTR_PREV));
+ ASSERT_EQ(EINVAL, errno);
+
+ free(ctx);
+}
+
+TEST(basic_lsm_set_self_attr)
+{
+ const long page_size = sysconf(_SC_PAGESIZE);
+ __kernel_size_t size = page_size;
+ struct lsm_ctx *ctx = calloc(page_size, 1);
+ struct lsm_ctx *tctx;
+ __u32 *syscall_lsms = calloc(page_size, 1);
+ char *attr = calloc(page_size, 1);
+ bool active_apparmor = false;
+ bool active_selinux = false;
+ bool active_smack = false;
+ int cnt_current = 0;
+ int cnt_exec = 0;
+ int cnt_fscreate = 0;
+ int cnt_keycreate = 0;
+ int cnt_prev = 0;
+ int cnt_sockcreate = 0;
+ int lsmcount;
+ int count;
+ int rc;
+ int i;
+
+ ASSERT_NE(NULL, ctx);
+ ASSERT_NE(NULL, syscall_lsms);
+
+ lsmcount = syscall(__NR_lsm_module_list, syscall_lsms, &size, 0);
+ ASSERT_LE(1, lsmcount);
+
+ for (i = 0; i < lsmcount; i++) {
+ switch (syscall_lsms[i]) {
+ case LSM_ID_SELINUX:
+ active_selinux = true;
+ cnt_current++;
+ cnt_exec++;
+ cnt_fscreate++;
+ cnt_keycreate++;
+ cnt_prev++;
+ cnt_sockcreate++;
+ break;
+ case LSM_ID_SMACK:
+ active_smack = true;
+ cnt_current++;
+ break;
+ case LSM_ID_APPARMOR:
+ active_apparmor = true;
+ cnt_current++;
+ cnt_exec++;
+ cnt_prev++;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (cnt_current) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_CURRENT);
+ ASSERT_EQ(cnt_current, count);
+ tctx = ctx;
+
+ for (i = 0; i < count; i++) {
+ switch (tctx->id) {
+ case LSM_ID_SELINUX:
+ ASSERT_EQ(active_selinux, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_CURRENT);
+ ASSERT_EQ(0, rc);
+ tctx->ctx[0] = 'X';
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_CURRENT);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ case LSM_ID_SMACK:
+ ASSERT_EQ(active_smack, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_CURRENT);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EPERM, errno);
+ break;
+ case LSM_ID_APPARMOR:
+ ASSERT_EQ(active_apparmor, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_CURRENT);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ default:
+ }
+ tctx = next_ctx(tctx);
+ }
+ }
+ if (cnt_exec) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_EXEC);
+ ASSERT_GE(cnt_exec, count);
+ tctx = ctx;
+
+ for (i = 0; i < count; i++) {
+ switch (tctx->id) {
+ case LSM_ID_SELINUX:
+ ASSERT_EQ(active_selinux, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_EXEC);
+ ASSERT_EQ(0, rc);
+ tctx->ctx[0] = 'X';
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_EXEC);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ case LSM_ID_APPARMOR:
+ ASSERT_EQ(active_apparmor, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_EXEC);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EPERM, errno);
+ break;
+ default:
+ break;
+ }
+ tctx = next_ctx(tctx);
+ }
+ }
+ if (cnt_prev) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_PREV);
+ ASSERT_GE(cnt_prev, count);
+ tctx = ctx;
+
+ for (i = 0; i < count; i++) {
+ switch (tctx->id) {
+ case LSM_ID_SELINUX:
+ ASSERT_EQ(active_selinux, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_PREV);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ tctx->ctx[0] = 'X';
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_PREV);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ case LSM_ID_APPARMOR:
+ ASSERT_EQ(active_apparmor, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_PREV);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EPERM, errno);
+ break;
+ default:
+ break;
+ }
+ tctx = next_ctx(tctx);
+ }
+ }
+ if (cnt_fscreate) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_FSCREATE);
+ ASSERT_GE(cnt_fscreate, count);
+ tctx = ctx;
+
+ for (i = 0; i < count; i++) {
+ switch (tctx->id) {
+ case LSM_ID_SELINUX:
+ ASSERT_EQ(active_selinux, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_FSCREATE);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ tctx->ctx[0] = 'X';
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_FSCREATE);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ default:
+ break;
+ }
+ tctx = next_ctx(tctx);
+ }
+ }
+ if (cnt_keycreate) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_KEYCREATE);
+ ASSERT_GE(cnt_keycreate, count);
+ tctx = ctx;
+
+ for (i = 0; i < count; i++) {
+ switch (tctx->id) {
+ case LSM_ID_SELINUX:
+ ASSERT_EQ(active_selinux, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_KEYCREATE);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ tctx->ctx[0] = 'X';
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_KEYCREATE);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ default:
+ break;
+ }
+ tctx = next_ctx(tctx);
+ }
+ }
+ if (cnt_sockcreate) {
+ size = page_size;
+ count = syscall(__NR_lsm_get_self_attr, ctx, &size,
+ LSM_ATTR_SOCKCREATE);
+ ASSERT_GE(cnt_sockcreate, count);
+ tctx = ctx;
+
+ for (i = 0; i < count; i++) {
+ switch (tctx->id) {
+ case LSM_ID_SELINUX:
+ ASSERT_EQ(active_selinux, true);
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_SOCKCREATE);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ tctx->ctx[0] = 'X';
+ rc = syscall(__NR_lsm_set_self_attr, tctx, size,
+ LSM_ATTR_SOCKCREATE);
+ ASSERT_EQ(-1, rc);
+ ASSERT_EQ(EINVAL, errno);
+ break;
+ default:
+ break;
+ }
+ tctx = next_ctx(tctx);
+ }
+ }
+
+ free(ctx);
+ free(attr);
+ free(syscall_lsms);
+}
+
+TEST_HARNESS_MAIN
--
2.39.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: [PATCH v5 5/8] LSM: Create lsm_module_list system call
2023-01-09 18:07 ` [PATCH v5 5/8] LSM: Create lsm_module_list system call Casey Schaufler
@ 2023-01-11 0:50 ` kernel test robot
2023-01-11 21:07 ` Paul Moore
1 sibling, 0 replies; 32+ messages in thread
From: kernel test robot @ 2023-01-11 0:50 UTC (permalink / raw)
To: Casey Schaufler, casey.schaufler, paul, linux-security-module
Cc: oe-kbuild-all, casey, jmorris, keescook, john.johansen,
penguin-kernel, stephen.smalley.work, linux-kernel, linux-api,
mic
[-- Attachment #1: Type: text/plain, Size: 8334 bytes --]
Hi Casey,
I love your patch! Yet something to improve:
[auto build test ERROR on tip/perf/core]
[also build test ERROR on acme/perf/core shuah-kselftest/next shuah-kselftest/fixes linus/master v6.2-rc3 next-20230110]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Casey-Schaufler/LSM-Maintain-a-table-of-LSM-attribute-data/20230110-030739
patch link: https://lore.kernel.org/r/20230109180717.58855-6-casey%40schaufler-ca.com
patch subject: [PATCH v5 5/8] LSM: Create lsm_module_list system call
config: microblaze-randconfig-r011-20230108
compiler: microblaze-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/681c9be927fbd6bf90025a20cbf8e47fc2635063
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Casey-Schaufler/LSM-Maintain-a-table-of-LSM-attribute-data/20230110-030739
git checkout 681c9be927fbd6bf90025a20cbf8e47fc2635063
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=microblaze olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=microblaze SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
In file included from security/lsm_syscalls.c:15:
include/linux/syscalls.h:243:25: error: conflicting types for 'sys_lsm_get_self_attr'; have 'long int(struct lsm_ctx *, size_t *, u32)' {aka 'long int(struct lsm_ctx *, unsigned int *, unsigned int)'}
243 | asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
| ^~~
include/linux/syscalls.h:229:9: note: in expansion of macro '__SYSCALL_DEFINEx'
229 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~
include/linux/syscalls.h:220:36: note: in expansion of macro 'SYSCALL_DEFINEx'
220 | #define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
| ^~~~~~~~~~~~~~~
security/lsm_syscalls.c:61:1: note: in expansion of macro 'SYSCALL_DEFINE3'
61 | SYSCALL_DEFINE3(lsm_get_self_attr,
| ^~~~~~~~~~~~~~~
include/linux/syscalls.h:1062:17: note: previous declaration of 'sys_lsm_get_self_attr' with type 'long int(struct lsm_ctx *, size_t *, int)' {aka 'long int(struct lsm_ctx *, unsigned int *, int)'}
1062 | asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
| ^~~~~~~~~~~~~~~~~~~~~
>> include/linux/syscalls.h:243:25: error: conflicting types for 'sys_lsm_module_list'; have 'long int(u32 *, size_t *, u64)' {aka 'long int(unsigned int *, unsigned int *, long long unsigned int)'}
243 | asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
| ^~~
include/linux/syscalls.h:229:9: note: in expansion of macro '__SYSCALL_DEFINEx'
229 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~
include/linux/syscalls.h:220:36: note: in expansion of macro 'SYSCALL_DEFINEx'
220 | #define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
| ^~~~~~~~~~~~~~~
security/lsm_syscalls.c:197:1: note: in expansion of macro 'SYSCALL_DEFINE3'
197 | SYSCALL_DEFINE3(lsm_module_list,
| ^~~~~~~~~~~~~~~
include/linux/syscalls.h:1064:17: note: previous declaration of 'sys_lsm_module_list' with type 'long int(u32 *, size_t *, int)' {aka 'long int(unsigned int *, unsigned int *, int)'}
1064 | asmlinkage long sys_lsm_module_list(u32 *ids, size_t *size, int flags);
| ^~~~~~~~~~~~~~~~~~~
vim +243 include/linux/syscalls.h
bed1ffca022cc8 Frederic Weisbecker 2009-03-13 217
6c5979631b4b03 Heiko Carstens 2009-02-11 218 #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
6c5979631b4b03 Heiko Carstens 2009-02-11 219 #define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
6c5979631b4b03 Heiko Carstens 2009-02-11 @220 #define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
6c5979631b4b03 Heiko Carstens 2009-02-11 221 #define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
6c5979631b4b03 Heiko Carstens 2009-02-11 222 #define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__)
6c5979631b4b03 Heiko Carstens 2009-02-11 223 #define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
1a94bc34768e46 Heiko Carstens 2009-01-14 224
609320c8a22715 Yonghong Song 2017-09-07 225 #define SYSCALL_DEFINE_MAXARGS 6
609320c8a22715 Yonghong Song 2017-09-07 226
bed1ffca022cc8 Frederic Weisbecker 2009-03-13 227 #define SYSCALL_DEFINEx(x, sname, ...) \
99e621f796d7f0 Al Viro 2013-03-05 228 SYSCALL_METADATA(sname, x, __VA_ARGS__) \
bed1ffca022cc8 Frederic Weisbecker 2009-03-13 229 __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
bed1ffca022cc8 Frederic Weisbecker 2009-03-13 230
2cf0966683430b Al Viro 2013-01-21 231 #define __PROTECT(...) asmlinkage_protect(__VA_ARGS__)
1bd21c6c21e848 Dominik Brodowski 2018-04-05 232
e145242ea0df6b Dominik Brodowski 2018-04-09 233 /*
e145242ea0df6b Dominik Brodowski 2018-04-09 234 * The asmlinkage stub is aliased to a function named __se_sys_*() which
e145242ea0df6b Dominik Brodowski 2018-04-09 235 * sign-extends 32-bit ints to longs whenever needed. The actual work is
e145242ea0df6b Dominik Brodowski 2018-04-09 236 * done within __do_sys_*().
e145242ea0df6b Dominik Brodowski 2018-04-09 237 */
1bd21c6c21e848 Dominik Brodowski 2018-04-05 238 #ifndef __SYSCALL_DEFINEx
bed1ffca022cc8 Frederic Weisbecker 2009-03-13 239 #define __SYSCALL_DEFINEx(x, name, ...) \
bee20031772af3 Arnd Bergmann 2018-06-19 240 __diag_push(); \
bee20031772af3 Arnd Bergmann 2018-06-19 241 __diag_ignore(GCC, 8, "-Wattribute-alias", \
bee20031772af3 Arnd Bergmann 2018-06-19 242 "Type aliasing is used to sanitize syscall arguments");\
83460ec8dcac14 Andi Kleen 2013-11-12 @243 asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
e145242ea0df6b Dominik Brodowski 2018-04-09 244 __attribute__((alias(__stringify(__se_sys##name)))); \
c9a211951c7c79 Howard McLauchlan 2018-03-21 245 ALLOW_ERROR_INJECTION(sys##name, ERRNO); \
e145242ea0df6b Dominik Brodowski 2018-04-09 246 static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));\
e145242ea0df6b Dominik Brodowski 2018-04-09 247 asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \
e145242ea0df6b Dominik Brodowski 2018-04-09 248 asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
1a94bc34768e46 Heiko Carstens 2009-01-14 249 { \
e145242ea0df6b Dominik Brodowski 2018-04-09 250 long ret = __do_sys##name(__MAP(x,__SC_CAST,__VA_ARGS__));\
07fe6e00f6cca6 Al Viro 2013-01-21 251 __MAP(x,__SC_TEST,__VA_ARGS__); \
2cf0966683430b Al Viro 2013-01-21 252 __PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \
2cf0966683430b Al Viro 2013-01-21 253 return ret; \
1a94bc34768e46 Heiko Carstens 2009-01-14 254 } \
bee20031772af3 Arnd Bergmann 2018-06-19 255 __diag_pop(); \
e145242ea0df6b Dominik Brodowski 2018-04-09 256 static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
1bd21c6c21e848 Dominik Brodowski 2018-04-05 257 #endif /* __SYSCALL_DEFINEx */
1a94bc34768e46 Heiko Carstens 2009-01-14 258
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 178357 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/microblaze 6.2.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="microblaze-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_SELFTEST=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_EMBEDDED is not set
#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup
CONFIG_MICROBLAZE=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
#
# Platform options
#
CONFIG_OPT_LIB_FUNCTION=y
#
# Definitions for MICROBLAZE0
#
CONFIG_KERNEL_BASE_ADDR=0x90000000
CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=0
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=0
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=0
CONFIG_XILINX_MICROBLAZE0_USE_DIV=0
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=0
CONFIG_XILINX_MICROBLAZE0_USE_FPU=0
CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
# end of Platform options
#
# Processor type and features
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_MMU=y
#
# Boot options
#
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyUL0,115200"
CONFIG_CMDLINE_FORCE=y
# end of Processor type and features
#
# Kernel features
#
CONFIG_NR_CPUS=1
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM=y
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_MANUAL_RESET_VECTOR=0x0
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
# end of Kernel features
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_MMU_GATHER_NO_RANGE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_SECCOMP=y
CONFIG_LTO_NONE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_ARCH_HASH=y
CONFIG_CLONE_BACKWARDS3=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_NO_EFFICIENT_FFS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_CGROUP_IOPRIO=y
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# CONFIG_BFQ_GROUP_IOSCHED is not set
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ARCH_NO_SWAP=y
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ZONE_DMA=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_KMAP_LOCAL=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=y
# CONFIG_TCP_CONG_LP is not set
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_TCP_CONG_DCTCP=y
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=y
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
CONFIG_DEFAULT_BBR=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bbr"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
# CONFIG_NETLABEL is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
# CONFIG_MPTCP_IPV6 is not set
CONFIG_MPTCP_KUNIT_TEST=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NETFILTER_NETLINK_OSF=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
CONFIG_NF_TABLES_NETDEV=y
# CONFIG_NFT_NUMGEN is not set
# CONFIG_NFT_LOG is not set
# CONFIG_NFT_LIMIT is not set
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=y
# CONFIG_NFT_COMPAT is not set
CONFIG_NFT_HASH=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=y
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=y
# CONFIG_IP_SET_HASH_NETIFACE is not set
CONFIG_IP_SET_LIST_SET=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
# CONFIG_NFT_FIB_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
# CONFIG_IP_NF_MATCH_ECN is not set
CONFIG_IP_NF_MATCH_RPFILTER=y
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TPROXY_IPV6=y
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
# CONFIG_IP6_NF_MATCH_RT is not set
CONFIG_IP6_NF_MATCH_SRH=y
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
# end of IPv6: Netfilter Configuration
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
# CONFIG_BRIDGE_EBT_AMONG is not set
# CONFIG_BRIDGE_EBT_ARP is not set
CONFIG_BRIDGE_EBT_IP=y
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
# CONFIG_BRIDGE_EBT_REDIRECT is not set
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
# CONFIG_6LOWPAN_NHC_HOP is not set
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
# CONFIG_6LOWPAN_NHC_ROUTING is not set
# CONFIG_6LOWPAN_NHC_UDP is not set
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=y
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=y
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=y
# CONFIG_NET_SCH_HHF is not set
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
CONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
# CONFIG_NET_EMATCH_IPT is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=y
# CONFIG_VSOCKETS_DIAG is not set
CONFIG_VSOCKETS_LOOPBACK=y
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
# CONFIG_BPQETHER is not set
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
# end of AX.25 network device drivers
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_CMTP is not set
CONFIG_BT_HIDP=y
# CONFIG_BT_HS is not set
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
CONFIG_BT_AOSPEXT=y
# CONFIG_BT_DEBUGFS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_FEATURE_DEBUG=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
# CONFIG_BT_HCIBTUSB_POLL_SYNC is not set
# CONFIG_BT_HCIBTUSB_BCM is not set
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
# CONFIG_BT_HCIUART_INTEL is not set
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBCM4377=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_MTKSDIO=y
# CONFIG_BT_MTKUART is not set
# CONFIG_BT_QCOMSMD is not set
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_TEST=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
# CONFIG_NFC_NCI_SPI is not set
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_VIRTUAL_NCI=y
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
# CONFIG_NFC_PN532_UART is not set
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
# CONFIG_NFC_MRVL_UART is not set
# CONFIG_NFC_MRVL_I2C is not set
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
# CONFIG_NFC_ST_NCI_SPI is not set
# CONFIG_NFC_NXP_NCI is not set
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# PCI controller drivers
#
CONFIG_PCI_FTPCI100=y
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
# CONFIG_PCIE_XILINX_CPM is not set
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MT7621 is not set
#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=y
CONFIG_CXL_MEM_RAW_COMMANDS=y
# CONFIG_CXL_MEM is not set
CONFIG_CXL_PORT=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
CONFIG_MOXTET=y
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
CONFIG_MTD=y
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
# CONFIG_NFTL is not set
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PCI=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_SAMSUNG is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
CONFIG_MTD_RAW_NAND=y
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
# CONFIG_MTD_NAND_DENALI_DT is not set
CONFIG_MTD_NAND_AMS_DELTA=y
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_OXNAS is not set
# CONFIG_MTD_NAND_FSL_IFC is not set
# CONFIG_MTD_NAND_VF610_NFC is not set
# CONFIG_MTD_NAND_MXC is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
# CONFIG_MTD_NAND_TXX9NDFMC is not set
# CONFIG_MTD_NAND_FSMC is not set
# CONFIG_MTD_NAND_SUNXI is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_QCOM is not set
CONFIG_MTD_NAND_MXIC=y
# CONFIG_MTD_NAND_TEGRA is not set
# CONFIG_MTD_NAND_STM32_FMC2 is not set
# CONFIG_MTD_NAND_MESON is not set
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_NAND_CADENCE is not set
CONFIG_MTD_NAND_ARASAN=y
CONFIG_MTD_NAND_INTEL_LGM=y
# CONFIG_MTD_NAND_RENESAS is not set
#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH is not set
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=y
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
# CONFIG_SPI_HISI_SFC is not set
# CONFIG_SPI_NXP_SPIFI is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TCP is not set
CONFIG_NVME_AUTH=y
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SMPRO_ERRMON=y
CONFIG_SMPRO_MISC=y
# CONFIG_GEHC_ACHC is not set
CONFIG_HI6421V600_IRQ=y
CONFIG_HP_ILO=y
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_PCH_PHUB is not set
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
CONFIG_ECHO=y
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=y
# CONFIG_PVPANIC is not set
CONFIG_GP_PCI1XXXX=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=y
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
# CONFIG_MEGARAID_MAILBOX is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPI3MR=y
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_MYRB=y
CONFIG_SCSI_MYRS=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_EFCT=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_WD719X=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
# CONFIG_DM_ERA is not set
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
# CONFIG_DM_MULTIPATH_HST is not set
CONFIG_DM_MULTIPATH_IOA=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_INIT is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
# CONFIG_DM_ZONED is not set
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_ISCSI_TARGET_CXGB4=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
CONFIG_WIREGUARD=y
CONFIG_WIREGUARD_DEBUG=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_IFB=y
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
# CONFIG_NET_TEAM_MODE_RANDOM is not set
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=y
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
CONFIG_AMT=y
CONFIG_MACSEC=y
# CONFIG_NETCONSOLE is not set
CONFIG_NTB_NETDEV=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_VSOCKMON=y
CONFIG_MHI_NET=y
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ACTIONS is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
# CONFIG_NET_XGENE_V2 is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
# CONFIG_EMAC_ROCKCHIP is not set
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
# CONFIG_SPI_AX88796C_COMPRESSION is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCM4908_ENET is not set
# CONFIG_BCMGENET is not set
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
# CONFIG_TIGON3_HWMON is not set
CONFIG_BNX2X=y
CONFIG_BNX2X_SRIOV=y
# CONFIG_BGMAC_BCMA is not set
# CONFIG_BGMAC_PLATFORM is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4_DCB=y
# CONFIG_CHELSIO_T4VF is not set
CONFIG_CHELSIO_LIB=y
# CONFIG_CHELSIO_INLINE_CRYPTO is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0_PLATFORM is not set
# CONFIG_EP93XX_ETH is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9000 is not set
CONFIG_DM9051=y
CONFIG_DNET=y
# CONFIG_NET_VENDOR_DEC is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_FREESCALE=y
# CONFIG_FEC is not set
# CONFIG_FSL_FMAN is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_FSL_XGMAC_MDIO is not set
# CONFIG_GIANFAR is not set
# CONFIG_FSL_DPAA2_SWITCH is not set
# CONFIG_FSL_ENETC_IERB is not set
# CONFIG_FSL_ENETC_MDIO is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_NET_VENDOR_GOOGLE is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
# CONFIG_HISI_FEMAC is not set
# CONFIG_HIP04_ETH is not set
# CONFIG_HNS_DSAF is not set
# CONFIG_HNS_ENET is not set
# CONFIG_HNS3 is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_JME is not set
# CONFIG_KORINA is not set
CONFIG_NET_VENDOR_ADI=y
# CONFIG_ADIN1110 is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MEDIATEK is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX4_CORE_GEN2 is not set
# CONFIG_MLX5_CORE is not set
CONFIG_MLXSW_CORE=y
# CONFIG_MLXSW_CORE_HWMON is not set
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=y
CONFIG_MLXSW_I2C=y
CONFIG_MLXSW_SPECTRUM=y
# CONFIG_MLXSW_SPECTRUM_DCB is not set
CONFIG_MLXSW_MINIMAL=y
CONFIG_MLXFW=y
# CONFIG_MLXBF_GIGE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_NET_VENDOR_MYRI is not set
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_LPC_ENET is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
CONFIG_ETHOC=y
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_SH_ETH is not set
# CONFIG_RAVB is not set
# CONFIG_RENESAS_ETHER_SWITCH is not set
# CONFIG_NET_VENDOR_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_SELFTESTS is not set
# CONFIG_STMMAC_PLATFORM is not set
CONFIG_DWMAC_LOONGSON=y
CONFIG_STMMAC_PCI=y
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SUNPLUS=y
# CONFIG_SP7021_EMAC is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=y
# CONFIG_XILINX_AXI_EMAC is not set
CONFIG_XILINX_LL_TEMAC=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_SFP is not set
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
# CONFIG_MESON_GXL_PHY is not set
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_BCM54140_PHY=y
# CONFIG_BCM63XX_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM84881_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
# CONFIG_MAXLINEAR_GPHY is not set
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_RENESAS_PHY=y
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
# CONFIG_TERANETICS_PHY is not set
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=y
# CONFIG_DP83869_PHY is not set
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_MICREL_KS8995MA=y
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
# CONFIG_CAN_CALC_BITTIMING is not set
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_AT91 is not set
CONFIG_CAN_CAN327=y
# CONFIG_CAN_FLEXCAN is not set
CONFIG_CAN_GRCAN=y
# CONFIG_CAN_JANZ_ICAN3 is not set
CONFIG_CAN_KVASER_PCIEFD=y
CONFIG_CAN_SLCAN=y
# CONFIG_CAN_SUN4I is not set
CONFIG_CAN_XILINXCAN=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
# CONFIG_CAN_C_CAN_PCI is not set
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_CTUCANFD=y
# CONFIG_CAN_CTUCANFD_PCI is not set
CONFIG_CAN_CTUCANFD_PLATFORM=y
# CONFIG_CAN_IFI_CANFD is not set
CONFIG_CAN_M_CAN=y
# CONFIG_CAN_M_CAN_PCI is not set
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
CONFIG_CAN_PEAK_PCIEFD=y
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_RCAR_CANFD is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_SOFTING=y
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
CONFIG_CAN_MCP251XFD=y
CONFIG_CAN_MCP251XFD_SANITY=y
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
# CONFIG_CAN_GS_USB is not set
CONFIG_CAN_KVASER_USB=y
# CONFIG_CAN_MCBA_USB is not set
CONFIG_CAN_PEAK_USB=y
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
#
# MCTP Device Drivers
#
# CONFIG_MCTP_SERIAL is not set
CONFIG_MCTP_TRANSPORT_I2C=y
# end of MCTP Device Drivers
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_SUN4I is not set
# CONFIG_MDIO_XGENE is not set
# CONFIG_MDIO_ASPEED is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
# CONFIG_MDIO_MVUSB is not set
CONFIG_MDIO_MSCC_MIIM=y
# CONFIG_MDIO_MOXART is not set
# CONFIG_MDIO_OCTEON is not set
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_MESON_G12A is not set
# CONFIG_MDIO_BUS_MUX_BCM6368 is not set
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
CONFIG_MDIO_BUS_MUX_GPIO=y
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
#
# PCS device drivers
#
CONFIG_PCS_XPCS=y
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
# CONFIG_USB_USBNET is not set
CONFIG_USB_HSO=y
CONFIG_USB_IPHETH=y
# CONFIG_WLAN is not set
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
# CONFIG_WANXL_BUILD_FIRMWARE is not set
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=y
# CONFIG_SLIC_DS26522 is not set
# CONFIG_LAPBETHER is not set
#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=y
CONFIG_MHI_WWAN_CTRL=y
CONFIG_MHI_WWAN_MBIM=y
# CONFIG_QCOM_BAM_DMUX is not set
# CONFIG_RPMSG_WWAN_CTRL is not set
# CONFIG_IOSM is not set
# CONFIG_MTK_T7XX is not set
# end of Wireless WAN
CONFIG_VMXNET3=y
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
# CONFIG_MISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_ILITEK=y
# CONFIG_TOUCHSCREEN_IPROC is not set
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
# CONFIG_TOUCHSCREEN_MIGOR is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
# CONFIG_TOUCHSCREEN_WM831X is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TS4800 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2005=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
# CONFIG_TOUCHSCREEN_SUN4I is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
CONFIG_TOUCHSCREEN_HIMAX_HX83112B=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM80X_ONKEY is not set
CONFIG_INPUT_AD714X=y
# CONFIG_INPUT_AD714X_I2C is not set
# CONFIG_INPUT_AD714X_SPI is not set
# CONFIG_INPUT_ARIEL_PWRBUTTON is not set
CONFIG_INPUT_ATC260X_ONKEY=y
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
# CONFIG_INPUT_MAX77650_ONKEY is not set
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
# CONFIG_INPUT_CPCAP_PWRBUTTON is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=y
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
# CONFIG_INPUT_RETU_PWRBUTTON is not set
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_TWL4030_VIBRA=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
# CONFIG_INPUT_PCAP is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IBM_PANEL is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_IQS626A=y
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
# CONFIG_INPUT_HISI_POWERKEY is not set
# CONFIG_INPUT_SC27XX_VIBRA is not set
CONFIG_INPUT_RT5120_PWRKEY=y
# CONFIG_INPUT_STPMIC1_ONKEY is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
# CONFIG_RMI4_F30 is not set
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PCIPS2=y
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
CONFIG_SERIO_XILINX_XPS_PS2=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_TEGRA_TCU is not set
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_SPRD=y
# CONFIG_SERIAL_SPRD_CONSOLE is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not set
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=y
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
# CONFIG_IPMI_IPMB is not set
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_SSIF_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
# CONFIG_HW_RANDOM is not set
CONFIG_XILINX_HWICAP=y
# CONFIG_APPLICOM is not set
# CONFIG_DEVMEM is not set
# CONFIG_DEVPORT is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_XILLYUSB=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
CONFIG_I2C_MUX_LTC4306=y
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_HIX5HD2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=y
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_FSI=y
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
# CONFIG_DW_I3C_MASTER is not set
CONFIG_SVC_I3C_MASTER=y
# CONFIG_MIPI_I3C_HCI is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
# CONFIG_SPI_AR934X is not set
# CONFIG_SPI_ATH79 is not set
# CONFIG_SPI_ARMADA_3700 is not set
# CONFIG_SPI_ASPEED_SMC is not set
# CONFIG_SPI_ATMEL is not set
# CONFIG_SPI_ATMEL_QUADSPI is not set
CONFIG_SPI_AXI_SPI_ENGINE=y
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
# CONFIG_SPI_CADENCE_XSPI is not set
# CONFIG_SPI_CLPS711X is not set
CONFIG_SPI_DESIGNWARE=y
# CONFIG_SPI_DW_DMA is not set
CONFIG_SPI_DW_PCI=y
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_DW_BT1 is not set
# CONFIG_SPI_EP93XX is not set
CONFIG_SPI_FSI=y
# CONFIG_SPI_FSL_LPSPI is not set
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
CONFIG_SPI_GPIO=y
# CONFIG_SPI_IMG_SPFI is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_JCORE is not set
# CONFIG_SPI_LP8841_RTC is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPICC is not set
# CONFIG_SPI_MESON_SPIFC is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not set
# CONFIG_SPI_WPCM_FIU is not set
# CONFIG_SPI_NPCM_FIU is not set
# CONFIG_SPI_NPCM_PSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_OMAP_100K is not set
# CONFIG_SPI_ORION is not set
CONFIG_SPI_PCI1XXXX=y
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_QUP is not set
# CONFIG_SPI_S3C64XX is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SLAVE_MT27XX is not set
CONFIG_SPI_SN_F_OSPI=y
# CONFIG_SPI_SPRD is not set
# CONFIG_SPI_SPRD_ADI is not set
# CONFIG_SPI_STM32 is not set
# CONFIG_SPI_STM32_QSPI is not set
# CONFIG_SPI_ST_SSC4 is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
# CONFIG_SPI_SYNQUACER is not set
CONFIG_SPI_MXIC=y
# CONFIG_SPI_TEGRA210_QUAD is not set
# CONFIG_SPI_TEGRA114 is not set
# CONFIG_SPI_TEGRA20_SFLASH is not set
# CONFIG_SPI_TEGRA20_SLINK is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_UNIPHIER is not set
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
# CONFIG_SPI_ZYNQ_QSPI is not set
CONFIG_SPI_ZYNQMP_GQSPI=y
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
# CONFIG_SPI_SLAVE_TIME is not set
# CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
# CONFIG_DP83640_PHY is not set
CONFIG_PTP_1588_CLOCK_INES=y
# CONFIG_PTP_1588_CLOCK_PCH is not set
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
CONFIG_PTP_1588_CLOCK_IDTCM=y
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not set
# CONFIG_PINCTRL_BM1880 is not set
CONFIG_PINCTRL_CY8C95X0=y
# CONFIG_PINCTRL_DA850_PUPD is not set
CONFIG_PINCTRL_DA9062=y
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LOONGSON2 is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_LOCHNAGAR=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
# CONFIG_EINT_MTK is not set
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
CONFIG_GPIO_IDIO_16=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_WCD934X=y
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not set
# CONFIG_GPIO_AMD_FCH is not set
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_BD71815 is not set
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
# CONFIG_GPIO_MAX77650 is not set
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_SL28CPLD is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
# CONFIG_GPIO_WM8350 is not set
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_PCI_IDIO_16=y
# CONFIG_GPIO_PCIE_IDIO_24 is not set
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX3191X=y
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
# CONFIG_GPIO_MOXTET is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_LATCH=y
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
# CONFIG_POWER_RESET_ATC260X is not set
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not set
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_LINKSTATION is not set
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_TPS65086 is not set
# CONFIG_POWER_RESET_KEYSTONE is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_POWER_RESET_RMOBILE is not set
CONFIG_REBOOT_MODE=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_POWER_RESET_SC27XX is not set
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_POWER_SUPPLY_HWMON is not set
CONFIG_PDA_POWER=y
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SAMSUNG_SDI=y
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9150=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_MT6360 is not set
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_SC2731 is not set
CONFIG_CHARGER_UCS1002=y
# CONFIG_CHARGER_BD99954 is not set
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_SMPRO=y
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
CONFIG_SENSORS_CORSAIR_CPRO=y
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
CONFIG_SENSORS_MAX6620=y
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=y
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
CONFIG_SENSORS_NZXT_KRAKEN2=y
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_PECI_CPUTEMP=y
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
# CONFIG_SENSORS_BPA_RS600 is not set
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
# CONFIG_SENSORS_IR38064_REGULATOR is not set
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=y
# CONFIG_SENSORS_PLI1209BC is not set
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=y
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_TPS546D24=y
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC2305=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_SUN8I_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
# CONFIG_BCM2835_THERMAL is not set
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# CONFIG_EXYNOS_THERMAL is not set
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
# CONFIG_BD957XMUF_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
# CONFIG_MENF21BMC_WATCHDOG is not set
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
# CONFIG_XILINX_WATCHDOG is not set
CONFIG_ZIIRAVE_WATCHDOG=y
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_S3C2410_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_RN5T618_WATCHDOG is not set
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
# CONFIG_RETU_WATCHDOG is not set
# CONFIG_MOXART_WDT is not set
# CONFIG_ST_LPC_WATCHDOG is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
CONFIG_STPMIC1_WATCHDOG=y
# CONFIG_UNIPHIER_WATCHDOG is not set
# CONFIG_RTD119X_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
CONFIG_ALIM7101_WDT=y
# CONFIG_SC520_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_KEMPLD_WDT=y
# CONFIG_RDC321X_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM2835_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_MEN_A21_WDT=y
# CONFIG_UML_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_PCI is not set
# CONFIG_BCMA_DRIVER_MIPS is not set
# CONFIG_BCMA_SFLASH is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
CONFIG_MFD_SMPRO=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77714=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RT5120=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SC27XX_PMIC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_ROHM_BD718XX is not set
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_RAVE_SP_CORE is not set
CONFIG_MFD_INTEL_M10_BMC=y
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_AAT2870 is not set
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
# CONFIG_REGULATOR_HI6421V530 is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX77650=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
# CONFIG_REGULATOR_MP5416 is not set
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
# CONFIG_REGULATOR_MPQ7920 is not set
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PBIAS is not set
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT5120 is not set
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6190=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
# CONFIG_REGULATOR_RTMV20 is not set
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_STPMIC1 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=y
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=y
#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_MEDIA_PLATFORM_DRIVERS is not set
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_VIDEO_VIMC is not set
CONFIG_VIDEO_VISL=y
# CONFIG_VISL_DEBUGFS is not set
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# end of Media drivers
#
# Media ancillary drivers
#
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
CONFIG_VIDEO_HI846=y
CONFIG_VIDEO_HI847=y
CONFIG_VIDEO_IMX208=y
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
CONFIG_VIDEO_IMX355=y
CONFIG_VIDEO_IMX412=y
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
CONFIG_VIDEO_MT9T001=y
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=y
# CONFIG_VIDEO_MT9V032 is not set
CONFIG_VIDEO_MT9V111=y
# CONFIG_VIDEO_NOON010PC30 is not set
CONFIG_VIDEO_OG01A1B=y
CONFIG_VIDEO_OV02A10=y
# CONFIG_VIDEO_OV08D10 is not set
CONFIG_VIDEO_OV08X40=y
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_OV13B10=y
CONFIG_VIDEO_OV2640=y
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
CONFIG_VIDEO_OV2685=y
# CONFIG_VIDEO_OV2740 is not set
CONFIG_VIDEO_OV4689=y
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
CONFIG_VIDEO_OV5670=y
# CONFIG_VIDEO_OV5675 is not set
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV7251 is not set
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
CONFIG_VIDEO_OV9282=y
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
CONFIG_VIDEO_RDACM20=y
# CONFIG_VIDEO_RDACM21 is not set
CONFIG_VIDEO_RJ54N1=y
# CONFIG_VIDEO_S5C73M3 is not set
CONFIG_VIDEO_S5K5BAF=y
# CONFIG_VIDEO_S5K6A3 is not set
CONFIG_VIDEO_S5K6AA=y
# CONFIG_VIDEO_SR030PC30 is not set
CONFIG_VIDEO_ST_VGXY61=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=y
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_M5MOLS is not set
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_LM3560=y
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_WM8775 is not set
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV748X is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_ISL7998X is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_MAX9286 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
# CONFIG_VIDEO_GS1662 is not set
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MSI001 is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
#
# Tools to develop new frontends
#
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_FB_OMAP_LCD_H3=y
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
# CONFIG_LCD_LTV350QV is not set
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
CONFIG_SOUND=y
# CONFIG_SND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
CONFIG_HID_MACALLY=y
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CREATIVE_SB0540=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_FT260=y
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_HOLTEK=y
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_VRC2=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
CONFIG_HID_MAYFLASH=y
# CONFIG_HID_MEGAWORLD_FF is not set
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
# CONFIG_NINTENDO_FF is not set
CONFIG_HID_NTI=y
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_PXRC is not set
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_TOPRE=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
CONFIG_HID_MCP2221=y
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
#
# Intel ISH HID support
#
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_FEW_INIT_RETRIES=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HISTB is not set
# CONFIG_USB_XHCI_MTK is not set
# CONFIG_USB_XHCI_MVEBU is not set
# CONFIG_USB_XHCI_RCAR is not set
# CONFIG_USB_BRCMSTB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
# CONFIG_USB_EHCI_HCD_NPCM7XX is not set
# CONFIG_USB_EHCI_HCD_ORION is not set
# CONFIG_USB_EHCI_HCD_SPEAR is not set
# CONFIG_USB_EHCI_HCD_STI is not set
# CONFIG_USB_EHCI_HCD_AT91 is not set
# CONFIG_USB_EHCI_SH is not set
# CONFIG_USB_EHCI_EXYNOS is not set
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_CNS3XXX_EHCI is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SPEAR is not set
# CONFIG_USB_OHCI_HCD_STI is not set
# CONFIG_USB_OHCI_HCD_S3C2410 is not set
# CONFIG_USB_OHCI_HCD_AT91 is not set
# CONFIG_USB_OHCI_HCD_OMAP3 is not set
# CONFIG_USB_OHCI_HCD_DAVINCI is not set
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_SH is not set
# CONFIG_USB_OHCI_EXYNOS is not set
# CONFIG_USB_CNS3XXX_OHCI is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
CONFIG_USBIP_CORE=y
# CONFIG_USBIP_VHCI_HCD is not set
CONFIG_USBIP_HOST=y
# CONFIG_USBIP_DEBUG is not set
#
# USB dual-mode controller drivers
#
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS3=y
# CONFIG_USB_CDNS3_HOST is not set
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_CDNS3_IMX=y
# CONFIG_USB_FOTG210 is not set
# CONFIG_USB_MTU3 is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y
#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
# CONFIG_USB_DWC2_DEBUG_PERIODIC is not set
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_F8153X=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_QCOM_EUD is not set
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_BRCM_USB_PINMAP is not set
CONFIG_USB_ONBOARD_HUB=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_TEGRA_PHY is not set
# CONFIG_USB_ULPI is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_SUNPLUS is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDHC is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_OMAP_HS is not set
CONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_DAVINCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_S3C is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_UNIPHIER is not set
CONFIG_MMC_CB710=y
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_USB is not set
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=y
# CONFIG_MMC_BCM2835 is not set
CONFIG_MMC_MTK=y
# CONFIG_MMC_OWL is not set
# CONFIG_MMC_LITEX is not set
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFS_DWC_TC_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
# CONFIG_SCSI_UFS_HISI is not set
# CONFIG_SCSI_UFS_RENESAS is not set
# CONFIG_SCSI_UFS_TI_J721E is not set
# CONFIG_SCSI_UFS_EXYNOS is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_CPCAP is not set
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
# CONFIG_LEDS_TURRIS_OMNIA is not set
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX77650=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
CONFIG_LEDS_LM36274=y
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
# CONFIG_INFINIBAND_ADDR_TRANS is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_VMWARE_PVRDMA=y
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_BRCMSTB is not set
# CONFIG_RTC_DRV_AS3722 is not set
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_MAX8907 is not set
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8997=y
# CONFIG_RTC_DRV_MAX77686 is not set
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS65910=y
# CONFIG_RTC_DRV_RC5T619 is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1343 is not set
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
CONFIG_RTC_DRV_DS1689=y
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_SC27XX is not set
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not set
# CONFIG_RTC_DRV_CADENCE is not set
CONFIG_RTC_DRV_FTRTC010=y
# CONFIG_RTC_DRV_STMP is not set
# CONFIG_RTC_DRV_PCAP is not set
CONFIG_RTC_DRV_MC13XXX=y
# CONFIG_RTC_DRV_JZ4740 is not set
# CONFIG_RTC_DRV_LPC24XX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
# CONFIG_RTC_DRV_MT6397 is not set
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not set
CONFIG_RTC_DRV_R7301=y
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_CPCAP is not set
# CONFIG_RTC_DRV_RTD119X is not set
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
# CONFIG_LINEDISP is not set
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_LCD2S=y
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_VDPA=y
# CONFIG_VDPA_USER is not set
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=y
# CONFIG_VHOST_VDPA is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
CONFIG_LMK04832=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX9485=y
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4755 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MEDIATEK_FHCTL is not set
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_CPUPLL is not set
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
CONFIG_MICROCHIP_PIT64B=y
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
CONFIG_PLATFORM_MHU=y
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
# CONFIG_ROCKCHIP_MBOX is not set
# CONFIG_ALTERA_MBOX is not set
CONFIG_MAILBOX_TEST=y
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_LOONGSON2_GUTS is not set
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
# CONFIG_BRCMSTB_DPFE is not set
# CONFIG_BRCMSTB_MEMC is not set
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
# CONFIG_MTK_SMI is not set
# CONFIG_DA8XX_DDRCTL is not set
# CONFIG_RENESAS_RPCIF is not set
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
# CONFIG_IIO is not set
CONFIG_NTB=y
# CONFIG_NTB_IDT is not set
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
CONFIG_XILINX_INTC=y
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RESET_RASPBERRYPI=y
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
# CONFIG_RESET_SIMPLE is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN9I_USB is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_INGENIC_USB is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
CONFIG_PHY_QCOM_USB_HS=y
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
CONFIG_PHY_QCOM_USB_HSIC=y
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_R8A779F0_ETHERNET_SERDES is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_DM816X_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
CONFIG_PHY_TUSB1210=y
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_DTPM=y
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_NVMEM_SPMI_SDAM=y
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_U_BOOT_ENV=y
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
# CONFIG_FSI_MASTER_ASPEED is not set
# CONFIG_FSI_SCOM is not set
# CONFIG_FSI_SBEFIFO is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
# CONFIG_SLIM_QCOM_CTRL is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=y
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=y
# CONFIG_INTEL_QEP is not set
# CONFIG_TI_ECAP_CAPTURE is not set
# CONFIG_MOST is not set
CONFIG_PECI=y
CONFIG_PECI_CPU=y
# CONFIG_PECI_ASPEED is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
# CONFIG_F2FS_FS is not set
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=y
# CONFIG_NTFS3_LZX_XPRESS is not set
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEPRECATED_API=y
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
# CONFIG_SECURITY_APPARMOR_HASH_DEFAULT is not set
# CONFIG_SECURITY_APPARMOR_EXPORT_BINARY is not set
# CONFIG_SECURITY_APPARMOR_PARANOID_LOAD is not set
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
# CONFIG_INTEGRITY_TRUSTED_KEYRING is not set
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
CONFIG_IMA_DEFAULT_HASH_SHA256=y
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha256"
CONFIG_IMA_WRITE_POLICY=y
# CONFIG_IMA_READ_POLICY is not set
# CONFIG_IMA_APPRAISE is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_DISABLE_HTABLE=y
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_KDB is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
# CONFIG_UBSAN_BOOL is not set
CONFIG_UBSAN_ENUM=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
# CONFIG_NET_NS_REFCNT_TRACKER is not set
CONFIG_DEBUG_NET=y
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_KMAP_LOCAL=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_KOBJECT_RELEASE=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_REF_SCALE_TEST=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_LATENCYTOP=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# microblaze Debugging
#
# end of microblaze Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data
2023-01-09 18:07 ` [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data Casey Schaufler
@ 2023-01-11 1:58 ` kernel test robot
2023-01-11 21:01 ` Paul Moore
1 sibling, 0 replies; 32+ messages in thread
From: kernel test robot @ 2023-01-11 1:58 UTC (permalink / raw)
To: Casey Schaufler
Cc: oe-lkp, lkp, linux-kernel, linux-security-module,
casey.schaufler, paul, casey, jmorris, keescook, john.johansen,
penguin-kernel, stephen.smalley.work, linux-api, mic
[-- Attachment #1: Type: text/plain, Size: 5092 bytes --]
Greeting,
FYI, we noticed WARNING:at_security/security.c:#append_ordered_lsm due to commit (built with gcc-11):
commit: 98221e36622f4dde4afa923518706bd2c8870f00 ("[PATCH v5 2/8] LSM: Maintain a table of LSM attribute data")
url: https://github.com/intel-lab-lkp/linux/commits/Casey-Schaufler/LSM-Maintain-a-table-of-LSM-attribute-data/20230110-030739
base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git 0ecc518e5c1a83fbfc6262d20d0df289eafc2207
patch link: https://lore.kernel.org/all/20230109180717.58855-3-casey@schaufler-ca.com/
patch subject: [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data
in testcase: boot
on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
[ 0.472992][ T0] ------------[ cut here ]------------
[ 0.472996][ T0] builtin: out of LSM slots!?
[ 0.474006][ T0] WARNING: CPU: 0 PID: 0 at security/security.c:173 append_ordered_lsm (security/security.c:173 (discriminator 1))
[ 0.474995][ T0] Modules linked in:
[ 0.476300][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.2.0-rc1-00014-g98221e36622f #1
[ 0.477324][ T0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014
[ 0.478996][ T0] RIP: 0010:append_ordered_lsm (security/security.c:173 (discriminator 1))
[ 0.480366][ T0] Code: 89 f5 53 48 89 fb e8 de fe ff ff 84 c0 75 79 48 63 05 54 76 13 00 83 f8 03 75 13 48 89 ee 48 c7 c7 4d e8 67 82 e8 66 97 55 fe <0f> 0b eb 5a 48 83 7b 18 00 75 08 48 c7 43 18 28 df a3 83 8d 50 01
All code
========
0: 89 f5 mov %esi,%ebp
2: 53 push %rbx
3: 48 89 fb mov %rdi,%rbx
6: e8 de fe ff ff callq 0xfffffffffffffee9
b: 84 c0 test %al,%al
d: 75 79 jne 0x88
f: 48 63 05 54 76 13 00 movslq 0x137654(%rip),%rax # 0x13766a
16: 83 f8 03 cmp $0x3,%eax
19: 75 13 jne 0x2e
1b: 48 89 ee mov %rbp,%rsi
1e: 48 c7 c7 4d e8 67 82 mov $0xffffffff8267e84d,%rdi
25: e8 66 97 55 fe callq 0xfffffffffe559790
2a:* 0f 0b ud2 <-- trapping instruction
2c: eb 5a jmp 0x88
2e: 48 83 7b 18 00 cmpq $0x0,0x18(%rbx)
33: 75 08 jne 0x3d
35: 48 c7 43 18 28 df a3 movq $0xffffffff83a3df28,0x18(%rbx)
3c: 83
3d: 8d 50 01 lea 0x1(%rax),%edx
Code starting with the faulting instruction
===========================================
0: 0f 0b ud2
2: eb 5a jmp 0x5e
4: 48 83 7b 18 00 cmpq $0x0,0x18(%rbx)
9: 75 08 jne 0x13
b: 48 c7 43 18 28 df a3 movq $0xffffffff83a3df28,0x18(%rbx)
12: 83
13: 8d 50 01 lea 0x1(%rax),%edx
[ 0.481996][ T0] RSP: 0000:ffffffff82e03e90 EFLAGS: 00010286
[ 0.483388][ T0] RAX: 0000000000000000 RBX: ffffffff83ae7938 RCX: c0000000ffff7fff
[ 0.484995][ T0] RDX: 0000000000000000 RSI: 0000000000027ffb RDI: 0000000000000001
[ 0.486542][ T0] RBP: ffffffff8265f33d R08: 0000000000000000 R09: 00000000ffff7fff
[ 0.487490][ T0] R10: ffffffff82e03d40 R11: ffffffff831d66e8 R12: ffff888100188bd3
[ 0.488517][ T0] R13: ffff888100188ba0 R14: 0000000000000001 R15: 0000000000000000
[ 0.489495][ T0] FS: 0000000000000000(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000
[ 0.490529][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.491364][ T0] CR2: ffff88843ffff000 CR3: 0000000002e0a000 CR4: 00000000000406b0
[ 0.492997][ T0] Call Trace:
[ 0.494012][ T0] <TASK>
[ 0.494774][ T0] ordered_lsm_parse (security/security.c:307)
[ 0.495996][ T0] ordered_lsm_init (security/security.c:379)
[ 0.496996][ T0] security_init (security/security.c:461)
[ 0.498304][ T0] start_kernel (init/main.c:1129)
[ 0.499310][ T0] secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:358)
[ 0.500222][ T0] </TASK>
[ 0.501166][ T0] ---[ end trace 0000000000000000 ]---
If you fix the issue, kindly add following tag
| Reported-by: kernel test robot <yujie.liu@intel.com>
| Link: https://lore.kernel.org/oe-lkp/202301110957.4f3cd38e-yujie.liu@intel.com
To reproduce:
# build kernel
cd linux
cp config-6.2.0-rc1-00014-g98221e36622f .config
make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
cd <mod-install-dir>
find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
# if come across any failure that blocks the test,
# please remove ~/.lkp and /lkp dir to run from a clean state.
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
[-- Attachment #2: config-6.2.0-rc1-00014-g98221e36622f --]
[-- Type: text/plain, Size: 166962 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 6.2.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23900
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23900
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
CONFIG_INTEL_TDX_GUEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_LATE_LOADING=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_X86_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_HANDOVER_PROTOCOL=y
CONFIG_EFI_MIXED=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_CALL_PADDING=y
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_CALL_THUNKS=y
CONFIG_PREFIX_SYMBOLS=y
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_RETPOLINE=y
CONFIG_RETHUNK=y
CONFIG_CPU_UNRET_ENTRY=y
CONFIG_CALL_DEPTH_TRACKING=y
# CONFIG_CALL_THUNKS_DEBUG is not set
CONFIG_CPU_IBPB_ENTRY=y
CONFIG_CPU_IBRS_ENTRY=y
# CONFIG_SLS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
# CONFIG_ACPI_FFH is not set
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not set
# CONFIG_X86_AMD_PSTATE_UT is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_XEN is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_VMD=y
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_TCP is not set
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_GSC is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_INTEL_MEI_PXP is not set
CONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_AHCI_DWC is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
# CONFIG_IXGBE_IPSEC is not set
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_ADI=y
# CONFIG_ADIN1110 is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
# CONFIG_PRESTERA is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_SFP is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_CAN327 is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_AMDPSP is not set
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support
CONFIG_PINCTRL=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_METEORLAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OXP is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
# CONFIG_SENSORS_TPS546D24 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ADVANTECH_EC_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
# CONFIG_EXAR_WDT is not set
CONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_ITE_CIR=m
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_TOY is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_RC_XBOX_DVD is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# end of Media drivers
CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
#
# Media ancillary drivers
#
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_NOMODESET=y
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_USE_DYNAMIC_DEBUG=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT_KVMGT is not set
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_PREEMPT_TIMEOUT_COMPUTE=7500
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_PRIVACY_SCREEN=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_UCSI_STM32G0 is not set
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_RT1719 is not set
# CONFIG_TYPEC_STUSB160X is not set
# CONFIG_TYPEC_WUSB3801 is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_FSA4480 is not set
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_GHES=y
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO=m
CONFIG_VFIO_CONTAINER=y
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MEM is not set
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
# CONFIG_NVSW_SN2201 is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
# CONFIG_AMD_PMF is not set
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
# CONFIG_ADV_SWBUTTON is not set
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_MERAKI_MX100 is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_X86_PLATFORM_DRIVERS_HP is not set
# CONFIG_WIRELESS_HOTKEY is not set
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_IFS is not set
# CONFIG_INTEL_SAR_INT1092 is not set
CONFIG_INTEL_PMC_CORE=m
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_WMI=y
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_INTEL_ISHTP_ECLITE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_VSEC is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_SERIAL_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_P2SB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not set
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
# CONFIG_IOMMUFD is not set
CONFIG_IRQ_REMAP=y
# CONFIG_VIRTIO_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_DWC is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
# CONFIG_NVDIMM_SECURITY_TEST is not set
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set
CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
CONFIG_NFSD=m
# CONFIG_NFSD_V2 is not set
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEPRECATED_API is not set
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=m
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
# CONFIG_CRYPTO_CURVE25519_X86 is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
# CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64 is not set
CONFIG_CRYPTO_CHACHA20_X86_64=m
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
# CONFIG_CRYPTO_POLYVAL_CLMUL_NI is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
# end of Accelerated Cryptographic Algorithms for CPU (x86)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# end of Library routines
CONFIG_ASN1_ENCODER=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_OBJTOOL=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FPROBE is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DYNAMIC_DEBUG is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 4946 bytes --]
#!/bin/sh
export_top_env()
{
export suite='boot'
export testcase='boot'
export category='functional'
export timeout='10m'
export job_origin='boot.yaml'
export queue_cmdline_keys='branch
commit'
export queue='bisect'
export testbox='vm-snb'
export tbox_group='vm-snb'
export branch='linux-review/Casey-Schaufler/LSM-Maintain-a-table-of-LSM-attribute-data/20230110-030739'
export commit='98221e36622f4dde4afa923518706bd2c8870f00'
export kconfig='x86_64-rhel-8.3-bpf'
export nr_vm=300
export submit_id='63bd3c6c307c10b1738db1ab'
export job_file='/lkp/jobs/scheduled/vm-meta-335/boot-1-debian-11.1-i386-20220923.cgz-98221e36622f4dde4afa923518706bd2c8870f00-20230110-45427-v3oqad-0.yaml'
export id='8e83d94b1ed721e85659e359a16dc6c95fcb8e97'
export queuer_version='/zday/lkp'
export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
export nr_cpu=2
export memory='16G'
export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
export ssh_base_port=23032
export kernel_cmdline='vmalloc=256M initramfs_async=0 page_owner=on'
export rootfs='debian-11.1-i386-20220923.cgz'
export compiler='gcc-11'
export enqueue_time='2023-01-10 18:22:36 +0800'
export _id='63bd3c6c307c10b1738db1ab'
export _rt='/result/boot/1/vm-snb/debian-11.1-i386-20220923.cgz/x86_64-rhel-8.3-bpf/gcc-11/98221e36622f4dde4afa923518706bd2c8870f00'
export user='lkp'
export LKP_SERVER='internal-lkp-server'
export result_root='/result/boot/1/vm-snb/debian-11.1-i386-20220923.cgz/x86_64-rhel-8.3-bpf/gcc-11/98221e36622f4dde4afa923518706bd2c8870f00/3'
export scheduler_version='/lkp/lkp/.src-20230108-203742'
export arch='i386'
export max_uptime=600
export initrd='/osimage/debian/debian-11.1-i386-20220923.cgz'
export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-snb/debian-11.1-i386-20220923.cgz/x86_64-rhel-8.3-bpf/gcc-11/98221e36622f4dde4afa923518706bd2c8870f00/3
BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3-bpf/gcc-11/98221e36622f4dde4afa923518706bd2c8870f00/vmlinuz-6.2.0-rc1-00014-g98221e36622f
branch=linux-review/Casey-Schaufler/LSM-Maintain-a-table-of-LSM-attribute-data/20230110-030739
job=/lkp/jobs/scheduled/vm-meta-335/boot-1-debian-11.1-i386-20220923.cgz-98221e36622f4dde4afa923518706bd2c8870f00-20230110-45427-v3oqad-0.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-rhel-8.3-bpf
commit=98221e36622f4dde4afa923518706bd2c8870f00
vmalloc=256M initramfs_async=0 page_owner=on
initcall_debug
nmi_watchdog=0
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
export modules_initrd='/pkg/linux/x86_64-rhel-8.3-bpf/gcc-11/98221e36622f4dde4afa923518706bd2c8870f00/modules.cgz'
export bm_initrd='/osimage/deps/debian-11.1-i386-20220923.cgz/run-ipconfig_20220923.cgz,/osimage/deps/debian-11.1-i386-20220923.cgz/lkp_20220923.cgz,/osimage/deps/debian-11.1-i386-20220923.cgz/rsync-rootfs_20220923.cgz'
export lkp_initrd='/osimage/user/lkp/lkp-i386.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export schedule_notify_address=
export meta_host='vm-meta-335'
export kernel='/pkg/linux/x86_64-rhel-8.3-bpf/gcc-11/98221e36622f4dde4afa923518706bd2c8870f00/vmlinuz-6.2.0-rc1-00014-g98221e36622f'
export dequeue_time='2023-01-10 19:45:08 +0800'
export job_initrd='/lkp/jobs/scheduled/vm-meta-335/boot-1-debian-11.1-i386-20220923.cgz-98221e36622f4dde4afa923518706bd2c8870f00-20230110-45427-v3oqad-0.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/wrapper heartbeat
run_monitor $LKP_SRC/monitors/wrapper meminfo
run_monitor $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test $LKP_SRC/tests/wrapper sleep 1
}
extract_stats()
{
export stats_part_begin=
export stats_part_end=
$LKP_SRC/stats/wrapper boot-slabinfo
$LKP_SRC/stats/wrapper boot-meminfo
$LKP_SRC/stats/wrapper memmap
$LKP_SRC/stats/wrapper boot-memory
$LKP_SRC/stats/wrapper boot-time
$LKP_SRC/stats/wrapper kernel-size
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper sleep
$LKP_SRC/stats/wrapper meminfo
$LKP_SRC/stats/wrapper time sleep.time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper last_state
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper time
}
"$@"
[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 29648 bytes --]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 1/8] LSM: Identify modules by more than name
2023-01-09 18:07 ` [PATCH v5 1/8] LSM: Identify modules by more than name Casey Schaufler
@ 2023-01-11 21:00 ` Paul Moore
2023-01-12 0:05 ` Casey Schaufler
0 siblings, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-01-11 21:00 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Mon, Jan 9, 2023 at 1:07 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>
> Create a struct lsm_id to contain identifying information
> about Linux Security Modules (LSMs). At inception this contains
> the name of the module, an identifier associated with the security
> module and an integer member "attrs_used" which identifies the API
> related data associated with each security module. The initial set
> of features maps to information that has traditionaly been available
> in /proc/self/attr. They are documented in a new userspace-api file.
> Change the security_add_hooks() interface to use this structure.
> Change the individual modules to maintain their own struct lsm_id
> and pass it to security_add_hooks().
>
> The values are for LSM identifiers are defined in a new UAPI
> header file linux/lsm.h. Each existing LSM has been updated to
> include it's LSMID in the lsm_id.
>
> The LSM ID values are sequential, with the oldest module
> LSM_ID_CAPABILITY being the lowest value and the existing modules
> numbered in the order they were included in the main line kernel.
> This is an arbitrary convention for assigning the values, but
> none better presents itself. The value 0 is defined as being invalid.
> The values 1-99 are reserved for any special case uses which may
> arise in the future. This may include attributes of the LSM
> infrastructure itself, possibly related to namespacing or network
> attribute management. A special range is identified for such attributes
> to help reduce confusion for developers unfamiliar with LSMs.
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> ---
> Documentation/userspace-api/index.rst | 1 +
> Documentation/userspace-api/lsm.rst | 55 +++++++++++++++++++++++++++
> include/linux/lsm_hooks.h | 18 ++++++++-
> include/uapi/linux/lsm.h | 55 +++++++++++++++++++++++++++
> security/apparmor/lsm.c | 9 ++++-
> security/bpf/hooks.c | 13 ++++++-
> security/commoncap.c | 8 +++-
> security/landlock/cred.c | 2 +-
> security/landlock/fs.c | 2 +-
> security/landlock/ptrace.c | 2 +-
> security/landlock/setup.c | 6 +++
> security/landlock/setup.h | 1 +
> security/loadpin/loadpin.c | 9 ++++-
> security/lockdown/lockdown.c | 8 +++-
> security/safesetid/lsm.c | 9 ++++-
> security/security.c | 12 +++---
> security/selinux/hooks.c | 11 +++++-
> security/smack/smack_lsm.c | 9 ++++-
> security/tomoyo/tomoyo.c | 9 ++++-
> security/yama/yama_lsm.c | 8 +++-
> 20 files changed, 226 insertions(+), 21 deletions(-)
> create mode 100644 Documentation/userspace-api/lsm.rst
> create mode 100644 include/uapi/linux/lsm.h
Mostly just nitpicky stuff below ...
> diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
> index 0a5ba81f7367..6f2cabb79ec4 100644
> --- a/include/linux/lsm_hooks.h
> +++ b/include/linux/lsm_hooks.h
> @@ -1665,6 +1665,20 @@ struct security_hook_heads {
> #undef LSM_HOOK
> } __randomize_layout;
>
> +/**
> + * struct lsm_id - identify a Linux Security Module.
According to the kernel-doc documentation it looks like "identify"
should be capitalized.
* https://docs.kernel.org/doc-guide/kernel-doc.html
> + * @lsm: Name of the LSM. Must be approved by the LSM maintainers.
> + * @id: LSM ID number from uapi/linux/lsm.h
> + * @attrs_used: Which attributes this LSM supports.
In a bit of a reversal to the above comment, it appears that the
parameter descriptions should not start with a capital and should not
end with punctuation:
* @lsm: name of the LSM, must be approved by the LSM maintainers
> + * Contains the information that identifies the LSM.
> + */
> +struct lsm_id {
> + const u8 *lsm;
> + u32 id;
> + u64 attrs_used;
> +};
> @@ -1708,7 +1722,7 @@ extern struct security_hook_heads security_hook_heads;
> extern char *lsm_names;
>
> extern void security_add_hooks(struct security_hook_list *hooks, int count,
> - const char *lsm);
> + struct lsm_id *lsmid);
We should be able to mark @lsmid as a const, right?
> diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
> new file mode 100644
> index 000000000000..61a91b7d946f
> --- /dev/null
> +++ b/include/uapi/linux/lsm.h
> @@ -0,0 +1,55 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/*
> + * Linux Security Modules (LSM) - User space API
> + *
> + * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
> + * Copyright (C) 2022 Intel Corporation
> + */
This file should be added to the SECURITY SUBSYSTEM section in MAINTAINERS:
F: include/uapi/linux/lsm.h
> +#ifndef _UAPI_LINUX_LSM_H
> +#define _UAPI_LINUX_LSM_H
> +
> +/*
> + * ID values to identify security modules.
> + * A system may use more than one security module.
> + *
> + * A value of 0 is considered invalid.
> + * Values 1-99 are reserved for future use.
> + * The interface is designed to extend to attributes beyond those which
> + * are active today. Currently all the attributes are specific to the
> + * individual modules. The LSM infrastructure itself has no variable state,
> + * but that may change. One proposal would allow loadable modules, in which
> + * case an attribute such as LSM_IS_LOADABLE might identify the dynamic
> + * modules. Another potential attribute could be which security modules is
> + * associated withnetwork labeling using netlabel. Another possible attribute
> + * could be related to stacking behavior in a namespaced environment.
> + * While it would be possible to intermingle the LSM infrastructure attribute
> + * values with the security module provided values, keeping them separate
> + * provides a clearer distinction.
> + */
As this is in a UAPI file, let's avoid speculation and stick to just
the current facts. Anything we write here with respect to the future
is likely to be wrong so let's not tempt fate.
Once I reached patch 3/8 I also realized that we may want to have more
than just 0/invalid as a sentinel value, or at the very least we need
to redefine 0 as something slightly different if for no other reason
than we in fs/proc/base.c. I know it seems a little trivial, but
since we're talking about values that will be used in the UAPI I think
we need to give it some thought and discussion. The only think I can
think of right now is to redefine 0 as "undefined", which isn't that
far removed from "invalid" and will not look too terrible in patch 3/8
- thoughts?
With all that in mind, I would suggest something like this:
/*
* ID tokens to identify Linux Security Modules (LSMs)
*
* These token values are used to uniquely identify specific LSMs
* in the kernel as well in the kernel's LSM userspace API.
*
* A value of zero/0 is considered undefined and should not be used
* outside of the kernel, values 1-99 are reserved for potential
* future use.
*/
#define LSM_ID_UNDEF 0
> +#define LSM_ID_CAPABILITY 100
> +#define LSM_ID_SELINUX 101
> +#define LSM_ID_SMACK 102
> +#define LSM_ID_TOMOYO 103
> +#define LSM_ID_IMA 104
> +#define LSM_ID_APPARMOR 105
> +#define LSM_ID_YAMA 106
> +#define LSM_ID_LOADPIN 107
> +#define LSM_ID_SAFESETID 108
> +#define LSM_ID_LOCKDOWN 109
> +#define LSM_ID_BPF 110
> +#define LSM_ID_LANDLOCK 111
> +
> +/*
> + * LSM_ATTR_XXX values identify the /proc/.../attr entry that the
> + * context represents. Not all security modules provide all of these
> + * values. Some security modules provide none of them.
> + */
I'd rather see text closer to this:
/*
* LSM attributes
*
* The LSM_ATTR_XXX definitions identify different LSM
* attributes which are used in the kernel's LSM userspace API.
* Support for these attributes vary across the different LSMs,
* none are required.
*/
> +#define LSM_ATTR_CURRENT 0x0001
> +#define LSM_ATTR_EXEC 0x0002
> +#define LSM_ATTR_FSCREATE 0x0004
> +#define LSM_ATTR_KEYCREATE 0x0008
> +#define LSM_ATTR_PREV 0x0010
> +#define LSM_ATTR_SOCKCREATE 0x0020
> +
> +#endif /* _UAPI_LINUX_LSM_H */
> diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
> index c6728a629437..63ea2a995987 100644
> --- a/security/apparmor/lsm.c
> +++ b/security/apparmor/lsm.c
> @@ -24,6 +24,7 @@
> #include <linux/zstd.h>
> #include <net/sock.h>
> #include <uapi/linux/mount.h>
> +#include <uapi/linux/lsm.h>
>
> #include "include/apparmor.h"
> #include "include/apparmorfs.h"
> @@ -1217,6 +1218,12 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
> .lbs_task = sizeof(struct aa_task_ctx),
> };
>
> +static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
> + .lsm = "apparmor",
> + .id = LSM_ID_APPARMOR,
> + .attrs_used = LSM_ATTR_CURRENT | LSM_ATTR_PREV | LSM_ATTR_EXEC,
> +};
Perhaps mark this as const in addition to ro_after_init? This applies
to all the other @lsm_id defs in this patch too.
> diff --git a/security/bpf/hooks.c b/security/bpf/hooks.c
> index e5971fa74fd7..20983ae8d31f 100644
> --- a/security/bpf/hooks.c
> +++ b/security/bpf/hooks.c
> @@ -5,6 +5,7 @@
> */
> #include <linux/lsm_hooks.h>
> #include <linux/bpf_lsm.h>
> +#include <uapi/linux/lsm.h>
>
> static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
> #define LSM_HOOK(RET, DEFAULT, NAME, ...) \
> @@ -15,9 +16,19 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
> LSM_HOOK_INIT(task_free, bpf_task_storage_free),
> };
>
> +/*
> + * slot has to be LSMBLOB_NEEDED because some of the hooks
> + * supplied by this module require a slot.
> + */
I don't think we need the above comment here, right?
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data
2023-01-09 18:07 ` [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data Casey Schaufler
2023-01-11 1:58 ` kernel test robot
@ 2023-01-11 21:01 ` Paul Moore
2023-01-12 0:36 ` Casey Schaufler
1 sibling, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-01-11 21:01 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Mon, Jan 9, 2023 at 1:07 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>
> As LSMs are registered add their lsm_id pointers to a table.
> This will be used later for attribute reporting.
>
> Determine the number of possible security modules based on
> their respective CONFIG options. This allows the number to be
> known at build time. This allows data structures and tables
> to use the constant.
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> ---
> include/linux/security.h | 2 ++
> security/security.c | 44 +++++++++++++++++++++++++++++++++-------
> 2 files changed, 39 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/security.h b/include/linux/security.h
> index 5b67f208f7de..33ed1860b96f 100644
> --- a/include/linux/security.h
> +++ b/include/linux/security.h
> @@ -138,6 +138,8 @@ enum lockdown_reason {
> };
>
> extern const char *const lockdown_reasons[LOCKDOWN_CONFIDENTIALITY_MAX+1];
> +extern u32 lsm_active_cnt;
> +extern struct lsm_id *lsm_idlist[];
>
> /* These functions are in security/commoncap.c */
> extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
> diff --git a/security/security.c b/security/security.c
> index 07a8fe7f92bf..a590fa98ddd6 100644
> --- a/security/security.c
> +++ b/security/security.c
> @@ -28,12 +28,29 @@
> #include <linux/backing-dev.h>
> #include <linux/string.h>
> #include <linux/msg.h>
> +#include <uapi/linux/lsm.h>
> #include <net/flow.h>
>
> #define MAX_LSM_EVM_XATTR 2
>
> -/* How many LSMs were built into the kernel? */
> -#define LSM_COUNT (__end_lsm_info - __start_lsm_info)
> +/*
> + * How many LSMs are built into the kernel as determined at
> + * build time. Used to determine fixed array sizes.
> + * The capability module is accounted for by CONFIG_SECURITY
> + */
> +#define LSM_COUNT ( \
> + (IS_ENABLED(CONFIG_SECURITY) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_SELINUX) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_SMACK) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_TOMOYO) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_IMA) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_APPARMOR) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_YAMA) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_LOADPIN) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_SAFESETID) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_LOCKDOWN_LSM) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_BPF_LSM) ? 1 : 0) + \
> + (IS_ENABLED(CONFIG_SECURITY_LANDLOCK) ? 1 : 0))
>
> /*
> * These are descriptions of the reasons that can be passed to the
> @@ -90,7 +107,7 @@ static __initdata const char *chosen_major_lsm;
> static __initconst const char * const builtin_lsm_order = CONFIG_LSM;
>
> /* Ordered list of LSMs to initialize. */
> -static __initdata struct lsm_info **ordered_lsms;
> +static __initdata struct lsm_info *ordered_lsms[LSM_COUNT + 1];
I'm guessing this 'LSM_COUNT + 1' logic is basically just copied from
ordered_lsm_init() - which is okay - but can you remind me why it is
'LSM_COUNT + 1' and not just 'LSM_COUNT'? Based on the LSM_COUNT
macro above it seems like LSM_COUNT should be enough, no?
> static __initdata struct lsm_info *exclusive;
>
> static __initdata bool debug;
> @@ -341,13 +358,16 @@ static void __init report_lsm_order(void)
> pr_cont("\n");
> }
>
> +/*
> + * Current index to use while initializing the lsm id list.
> + */
> +u32 lsm_active_cnt __lsm_ro_after_init;
> +struct lsm_id *lsm_idlist[LSM_COUNT] __lsm_ro_after_init;
> +
> static void __init ordered_lsm_init(void)
> {
> struct lsm_info **lsm;
>
> - ordered_lsms = kcalloc(LSM_COUNT + 1, sizeof(*ordered_lsms),
> - GFP_KERNEL);
> -
> if (chosen_lsm_order) {
> if (chosen_major_lsm) {
> pr_warn("security=%s is ignored because it is superseded by lsm=%s\n",
> @@ -388,7 +408,7 @@ static void __init ordered_lsm_init(void)
> for (lsm = ordered_lsms; *lsm; lsm++)
> initialize_lsm(*lsm);
>
> - kfree(ordered_lsms);
> + init_debug("lsm count = %d\n", lsm_active_cnt);
> }
Given 86ef3c735ec8 ("LSM: Better reporting of actual LSMs at boot"),
is this needed?
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs
2023-01-09 18:07 ` [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs Casey Schaufler
@ 2023-01-11 21:01 ` Paul Moore
2023-01-12 0:37 ` Casey Schaufler
0 siblings, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-01-11 21:01 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic, linux-fsdevel
On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>
> Use the LSM ID number instead of the LSM name to identify which
> security module's attibute data should be shown in /proc/self/attr.
> The security_[gs]etprocattr() functions have been changed to expect
> the LSM ID. The change from a string comparison to an integer comparison
> in these functions will provide a minor performance improvement.
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> Cc: linux-fsdevel@vger.kernel.org
> ---
> fs/proc/base.c | 29 +++++++++++++++--------------
> fs/proc/internal.h | 2 +-
> include/linux/security.h | 11 +++++------
> security/security.c | 11 +++++------
> 4 files changed, 26 insertions(+), 27 deletions(-)
...
> diff --git a/fs/proc/base.c b/fs/proc/base.c
> index 9e479d7d202b..9328b6b07dfc 100644
> --- a/fs/proc/base.c
> +++ b/fs/proc/base.c
> @@ -2837,27 +2838,27 @@ static const struct inode_operations proc_##LSM##_attr_dir_inode_ops = { \
>
> #ifdef CONFIG_SECURITY_SMACK
> static const struct pid_entry smack_attr_dir_stuff[] = {
> - ATTR("smack", "current", 0666),
> + ATTR(LSM_ID_SMACK, "current", 0666),
> };
> LSM_DIR_OPS(smack);
> #endif
>
> #ifdef CONFIG_SECURITY_APPARMOR
> static const struct pid_entry apparmor_attr_dir_stuff[] = {
> - ATTR("apparmor", "current", 0666),
> - ATTR("apparmor", "prev", 0444),
> - ATTR("apparmor", "exec", 0666),
> + ATTR(LSM_ID_APPARMOR, "current", 0666),
> + ATTR(LSM_ID_APPARMOR, "prev", 0444),
> + ATTR(LSM_ID_APPARMOR, "exec", 0666),
> };
> LSM_DIR_OPS(apparmor);
> #endif
>
> static const struct pid_entry attr_dir_stuff[] = {
> - ATTR(NULL, "current", 0666),
> - ATTR(NULL, "prev", 0444),
> - ATTR(NULL, "exec", 0666),
> - ATTR(NULL, "fscreate", 0666),
> - ATTR(NULL, "keycreate", 0666),
> - ATTR(NULL, "sockcreate", 0666),
> + ATTR(0, "current", 0666),
> + ATTR(0, "prev", 0444),
> + ATTR(0, "exec", 0666),
> + ATTR(0, "fscreate", 0666),
> + ATTR(0, "keycreate", 0666),
> + ATTR(0, "sockcreate", 0666),
See the discussion in patch 1/8, we should use a macro instead of a 0
here (although the exact macro definition is very much up for
discussion):
ATTR(LSM_ID_UNDEF, "current", 0666),
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
@ 2023-01-11 21:07 ` Paul Moore
2023-01-12 1:37 ` Casey Schaufler
2023-01-12 14:40 ` Arnd Bergmann
` (2 subsequent siblings)
3 siblings, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-01-11 21:07 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>
> Create a system call lsm_get_self_attr() to provide the security
> module maintained attributes of the current process. Historically
> these attributes have been exposed to user space via entries in
> procfs under /proc/self/attr.
>
> Attributes are provided as a collection of lsm_ctx structures
> which are placed into a user supplied buffer. Each structure
> identifys the size of the attribute, and the attribute value.
^^^
identifies
> The format of the attribute value is defined by the security
> module, but will always be \0 terminated. The ctx_len value
> will always be strlen(ctx)+1.
I don't want to limit ourselves to only sending string values as
attributes as who knows what we might need to do in the future, and
the struct was originally designed to support both strings and binary
data. I would suggest changing the sentences above to something like
this:
The format of the attribute value is defined by the individual LSM,
with the attribute itself stored in @ctx and the length of the
attribute stored in @ctx_len. Both strings and arbitrary binary
attributes are supported, but strings should be NULL terminated and
@ctx_len should be equal to `strlen(@ctx) + 1`.
> ---------------------------
> | __u32 id |
> ---------------------------
> | __u64 flags |
> ---------------------------
> | __kernel_size_t ctx_len |
> ---------------------------
> | __u8 ctx[ctx_len] |
> ---------------------------
> | __u32 id |
> ---------------------------
> | __u64 flags |
> ---------------------------
> | __kernel_size_t ctx_len |
> ---------------------------
> | __u8 ctx[ctx_len] |
> ---------------------------
Don't repeat the structure layout in memory twice here, it's
confusing. I also think it would be easier to read, and arguably more
useful, to simply copy the struct definition into the description
instead of the ASCII art column.
Although, this has got me wondering if we should think about aligning
the lsm_ctx structs when we are populating them in the kernel; more on
this below ...
> ---
> Documentation/userspace-api/lsm.rst | 9 ++
> include/linux/syscalls.h | 3 +
> include/uapi/linux/lsm.h | 21 ++++
> kernel/sys_ni.c | 3 +
> security/Makefile | 1 +
> security/lsm_syscalls.c | 182 ++++++++++++++++++++++++++++
> 6 files changed, 219 insertions(+)
> create mode 100644 security/lsm_syscalls.c
...
> diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
> index 33a0ee3bcb2e..a89205c70ffa 100644
> --- a/include/linux/syscalls.h
> +++ b/include/linux/syscalls.h
> @@ -71,6 +71,7 @@ struct clone_args;
> struct open_how;
> struct mount_attr;
> struct landlock_ruleset_attr;
> +struct lsm_ctx;
> enum landlock_rule_type;
>
> #include <linux/types.h>
> @@ -1058,6 +1059,8 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
> asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
> unsigned long home_node,
> unsigned long flags);
> +asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
> + int flags);
>
> /*
> * Architecture-specific system calls
> diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
> index 61a91b7d946f..8674d8c6b326 100644
> --- a/include/uapi/linux/lsm.h
> +++ b/include/uapi/linux/lsm.h
> @@ -9,6 +9,27 @@
> #ifndef _UAPI_LINUX_LSM_H
> #define _UAPI_LINUX_LSM_H
>
> +#include <linux/types.h>
> +#include <linux/unistd.h>
> +
> +/**
> + * struct lsm_ctx - LSM context
> + * @id: the LSM id number, see LSM_ID_XXX
As mentioned above, it occurred to me that we might want want to pad
out the lsm_ctx struct to ensure that the "array" of lsm_ctx is nicely
aligned. I know some systems used to complain about unaligned
accesses, and even on those that don't complain tend to be faster when
access are aligned. We can either implicitly align the individual
lsm_ctx structs or we can add a total length field (in addition to the
@ctx_len field) so that the padding/alignment is explicit.
Adding an explicit total length field could have some other advantages
in that it, in conjunction with the existing @flags field, would allow
an individual LSM to "extend" the lsm_ctx struct to provide additional
LSM specific information in the case where the single @ctx field was
not sufficient. Think of it as some additional future proofing in
addition to explicit padding.
> + * @flags: context specifier and LSM specific flags
* @flags: LSM specific flags
Only the individual LSM specified in @id should ever interpret @flags or @ctx.
> + * @ctx_len: the size of @ctx
> + * @ctx: the LSM context, a nul terminated string
* @ctx: the LSM context value
> + * @ctx in a nul terminated string.
> + * (strlen(@ctx) < @ctx_len) is always true.
> + * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
> + */
Let's rework the extra description too based on the comments above.
For the sake of clarity, here is what I'm currently thinking (comments
and feedback are encouraged):
/**
* struct lsm_ctx - LSM context information
* @id: the LSM ID token, see LSM_ID_XXX
* @flags: LSM specific flags
* @len: length of the lsm_ctx struct + extra (?) + padding
* @ctx_len: the size of @ctx
* @ctx: the LSM context value
*
* The @len field MUST be equal to size of the lsm_ctx struct
* plus any additional padding and/or data placed after @ctx.
*
* In all cases @ctx_len MUST be equal to length of @ctx. If
* @ctx is a string value, it should be nul terminated with
* @ctx_len equal to `strlen(@ctx) + 1`. Binary @ctx values
* are supported.
*
* The @flags and @ctx fields SHOULD only be interpreted by the
* LSM specified by @id; they MUST be set to zero/0 when not used.
*/
struct lsm_ctx {
__u32 id;
__u64 flags;
__kernel_size_t len;
__kernel_size_t ctx_len;
__u8 ctx[];
};
> diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
> new file mode 100644
> index 000000000000..55e8bf61ac8a
> --- /dev/null
> +++ b/security/lsm_syscalls.c
> @@ -0,0 +1,182 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * System calls implementing the Linux Security Module API.
> + *
> + * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
> + * Copyright (C) 2022 Intel Corporation
> + */
> +
> +#include <asm/current.h>
> +#include <linux/compiler_types.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/security.h>
> +#include <linux/stddef.h>
> +#include <linux/syscalls.h>
> +#include <linux/types.h>
> +#include <linux/lsm_hooks.h>
> +#include <uapi/linux/lsm.h>
> +
> +struct attrs_used_map {
> + char *name;
> + int attrs_used;
Based on the usage below it really seems like @attrs_used should just
be @attr, yes? That said, I'm not too bothered by it either way so if
you really love @attrs_used that's fine.
> +};
> +
> +static const struct attrs_used_map lsm_attr_names[] = {
We can probably just call this "attr_map" right? I mean the "used"
portion is pretty inherent in the fact that we're defining a mapping
:)
> + { .name = "current", .attrs_used = LSM_ATTR_CURRENT, },
> + { .name = "exec", .attrs_used = LSM_ATTR_EXEC, },
> + { .name = "fscreate", .attrs_used = LSM_ATTR_FSCREATE, },
> + { .name = "keycreate", .attrs_used = LSM_ATTR_KEYCREATE, },
> + { .name = "prev", .attrs_used = LSM_ATTR_PREV, },
> + { .name = "sockcreate", .attrs_used = LSM_ATTR_SOCKCREATE, },
> +};
> +
> +static int attr_used_index(u32 flags)
Since you can only return one index value at a time in this function
you can't really support multiple attribute bits set in the @flags
parameter so why not change the prototype to better match the required
usage, example:
static int attr_index(u32 attr)
> +{
> + int i;
> +
> + if (flags == 0)
> + return -EINVAL;
> +
> + for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
> + if ((lsm_attr_names[i].attrs_used & flags) == flags)
> + return i;
Given the above, why not simplify the above test to this:
if (lsm_attr_name[i].attr == attr)
return i;
If we don't care about failing fast in the case of being passed 0 (why
would we?) we can define this function as follows:
static int attr_index(u32 attr)
{
int i;
for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
if (lsm_attr_names[i].attr == attr)
return i;
return -EINVAL;
}
If we wanted to streamline things even further we could define
attr_map a bit differently and drop the loop in attr_index(). Yes, it
does waste attr_map[0], but I don't think anyone is going to be too
upset about one wasted index if it scales better.
static const struct attr_map[] = {
[LSM_ATTR_CURRENT] = { .name = "current", .attr = LSM_ATTR_CURRENT },
[LSM_ATTR_EXEC] = { .name = "exec", .attr = LSM_ATTR_EXEC },
...
};
static int attr_index(u32 attr)
{
if (attr == 0 || attr >= ARRAY_SIZE(attr_map))
return -EINVAL;
return attr;
}
If you did this you could probably also convert attr_map from a struct
to a simple array of strings as the attribute value would be the
associated index.
> +/**
> + * sys_lsm_get_self_attr - Return current task's security module attributes
> + * @ctx: the LSM contexts
> + * @size: size of @ctx, updated on return
> + * @flags: which attribute to return
> + *
> + * Returns the calling task's LSM contexts. On success this
> + * function returns the number of @ctx array elements. This value
> + * may be zero if there are no LSM contexts assigned. If @size is
> + * insufficient to contain the return data -E2BIG is returned and
> + * @size is set to the minimum required size. In all other cases
> + * a negative value indicating the error is returned.
> + */
> +SYSCALL_DEFINE3(lsm_get_self_attr,
> + struct lsm_ctx __user *, ctx,
> + size_t __user *, size,
> + u32, flags)
> +{
> + int i;
> + int rc = 0;
> + int len;
> + int attr;
> + int count = 0;
> + void *curr;
> + char *cp;
> + char *np;
> + char **interum_ctx;
> + size_t total_size = 0;
> + struct lsm_ctx *ip;
> + struct lsm_ctx *interum;
> + struct lsm_ctx *final = NULL;
> +
> + attr = attr_used_index(flags);
> + if (attr < 0)
> + return attr;
> +
> + interum = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
> + sizeof(*interum), GFP_KERNEL);
> + if (interum == NULL)
> + return -ENOMEM;
> + ip = interum;
> +
> + interum_ctx = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
> + sizeof(*interum_ctx), GFP_KERNEL);
> + if (interum_ctx == NULL) {
> + kfree(interum);
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < lsm_active_cnt; i++) {
> + if ((lsm_idlist[i]->attrs_used &
> + lsm_attr_names[attr].attrs_used) == 0)
> + continue;
> +
> + len = security_getprocattr(current, lsm_idlist[i]->id,
> + lsm_attr_names[attr].name,
> + &cp);
> + if (len <= 0)
> + continue;
> +
> + ip->id = lsm_idlist[i]->id;
> + ip->flags = lsm_attr_names[attr].attrs_used;
> + interum_ctx[count] = cp;
> +
> + /*
> + * A security module that returns a binary attribute
> + * will need to identify itself to prevent string
> + * processing.
> + *
> + * At least one security module adds a \n at the
> + * end of a context to make it look nicer. Change
> + * that to a \0 so that user space doesn't have to
> + * work around it.
> + *
> + * Security modules have been inconsistent about
> + * including the \0 terminator in the size. If it's
> + * not there make space for it.
> + *
> + * The length returned will reflect the length of
> + * the string provided by the security module, which
> + * may not match what getprocattr returned.
> + */
> + np = strnchr(cp, len, '\n');
> + if (np != NULL)
> + *np = '\0';
> + ip->ctx_len = strnlen(cp, len) + 1;
> + total_size += sizeof(*interum) + ip->ctx_len;
> + ip++;
> + count++;
> + }
> +
> + if (count == 0)
> + goto free_out;
> +
> + final = kzalloc(total_size, GFP_KERNEL);
> + if (final == NULL) {
> + rc = -ENOMEM;
> + goto free_out;
> + }
> +
> + curr = final;
> + ip = interum;
> + for (i = 0; i < count; i++) {
> + memcpy(curr, ip, sizeof(*interum));
> + curr += sizeof(*interum);
> + if (ip->ctx_len > 1)
> + memcpy(curr, interum_ctx[i], ip->ctx_len - 1);
> + curr += ip->ctx_len;
> + ip++;
> + }
> +
> + if (get_user(len, size)) {
> + rc = -EFAULT;
> + goto free_out;
> + }
> + if (total_size > len) {
> + rc = -ERANGE;
> + if (put_user(total_size, size) != 0)
> + rc = -EFAULT;
> + goto free_out;
> + }
> + if (copy_to_user(ctx, final, total_size) != 0 ||
> + put_user(total_size, size) != 0)
> + rc = -EFAULT;
> + else
> + rc = count;
> +
> +free_out:
> + for (i = 0; i < count; i++)
> + kfree(interum_ctx[i]);
> + kfree(interum_ctx);
> + kfree(interum);
> + kfree(final);
> + return rc;
> +}
Hmm. That's all kinda painful isn't it? I think trying to reuse
security_getprocattr() is doing more harm than good with all the
awkward handling necessary to ensure consistent output. While it's
nice to be able to reuse existing interfaces, one of the main
motivations behind the LSM syscall effort is to create a cleaner
interface that was designed from the beginning to support multiple
LSMs and provide a level of extensibility that we do not currently
have with the procfs interface. Hacking together all our old crap to
make this happen seems very wrong to me.
With that in mind I would like to propose we introduce a new LSM hook
to populate a lsm_ctx struct based on a LSM_ATTR_XXX value:
int security_sys_getselfattr(u64 attr, struct lsm_ctx __user *ctx,
size_t *len);
The individual LSMs would be responsible for fully populating their
lsm_ctx struct specified by @ctx (note the __user tagging) and would
return 0 on success or negative values on failure. The maximum size
of the @ctx buffer would be passed in via @len and the used size would
be returned in @len; in the case of an too-small @ctx, -E2BIG would be
returned and the necessary size would be returned in @len (just as
discussed for the syscall itself). This way the LSM layer syscall
function would not need to worry about properly terminating the
lsm_ctx::ctx field, setting any LSM specific flags, etc. Passing the
__user pointer directly not only greatly simplifies the LSM layer, it
also has the potential to reduce the number of allocations/copies.
Taking this approach should shrink the LSM layer syscall function to
simply needing to validate the passed @flags before looping through
the LSMs calling security_sys_getselfattr(). The lsm_ctx pointer
would need to be incremented appropriately for each call, and a total
length/size count would need to be maintained in case the buffer is
too small, but those should be relatively minor things.
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 5/8] LSM: Create lsm_module_list system call
2023-01-09 18:07 ` [PATCH v5 5/8] LSM: Create lsm_module_list system call Casey Schaufler
2023-01-11 0:50 ` kernel test robot
@ 2023-01-11 21:07 ` Paul Moore
2023-01-12 1:39 ` Casey Schaufler
1 sibling, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-01-11 21:07 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>
> Create a system call to report the list of Linux Security Modules
> that are active on the system. The list is provided as an array
> of LSM ID numbers.
>
> The calling application can use this list determine what LSM
> specific actions it might take. That might include chosing an
> output format, determining required privilege or bypassing
> security module specific behavior.
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> ---
> Documentation/userspace-api/lsm.rst | 3 +++
> include/linux/syscalls.h | 1 +
> kernel/sys_ni.c | 1 +
> security/lsm_syscalls.c | 41 +++++++++++++++++++++++++++++
> 4 files changed, 46 insertions(+)
...
> diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
> index 55e8bf61ac8a..92af1fcaa654 100644
> --- a/security/lsm_syscalls.c
> +++ b/security/lsm_syscalls.c
> @@ -180,3 +180,44 @@ SYSCALL_DEFINE3(lsm_get_self_attr,
> kfree(final);
> return rc;
> }
> +
> +/**
> + * sys_lsm_module_list - Return a list of the active security modules
> + * @ids: the LSM module ids
> + * @size: size of @ids, updated on return
> + * @flags: reserved for future use, must be zero
> + *
> + * Returns a list of the active LSM ids. On success this function
> + * returns the number of @ids array elements. This value may be zero
> + * if there are no LSMs active. If @size is insufficient to contain
> + * the return data -E2BIG is returned and @size is set to the minimum
> + * required size. In all other cases a negative value indicating the
> + * error is returned.
> + */
> +SYSCALL_DEFINE3(lsm_module_list,
> + u32 __user *, ids,
> + size_t __user *, size,
> + u64, flags)
> +{
> + size_t total_size = lsm_active_cnt * sizeof(*ids);
> + size_t usize;
> + int i;
> +
> + if (flags)
> + return -EINVAL;
> +
> + if (get_user(usize, size))
> + return -EFAULT;
> +
> + if (put_user(total_size, size) != 0)
> + return -EFAULT;
> +
> + if (usize < total_size)
> + return -E2BIG;
> +
> + for (i = 0; i < lsm_active_cnt; i++)
> + if (put_user(lsm_idlist[i]->id, ids++))
> + return -EFAULT;
> +
> + return lsm_active_cnt;
> +}
Similar to my comments in 4/8, I would probably create a new LSM hook
for this syscall so that the lsm_ctx is passed through the LSM layer
directly to the target LSM:
int security_sys_setselfattr(u64 attr, struct lsm_ctx __user *ctx,
size_t len);
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 1/8] LSM: Identify modules by more than name
2023-01-11 21:00 ` Paul Moore
@ 2023-01-12 0:05 ` Casey Schaufler
2023-01-12 20:30 ` Paul Moore
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-12 0:05 UTC (permalink / raw)
To: Paul Moore
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic, casey
On 1/11/2023 1:00 PM, Paul Moore wrote:
> On Mon, Jan 9, 2023 at 1:07 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> Create a struct lsm_id to contain identifying information
>> about Linux Security Modules (LSMs). At inception this contains
>> the name of the module, an identifier associated with the security
>> module and an integer member "attrs_used" which identifies the API
>> related data associated with each security module. The initial set
>> of features maps to information that has traditionaly been available
>> in /proc/self/attr. They are documented in a new userspace-api file.
>> Change the security_add_hooks() interface to use this structure.
>> Change the individual modules to maintain their own struct lsm_id
>> and pass it to security_add_hooks().
>>
>> The values are for LSM identifiers are defined in a new UAPI
>> header file linux/lsm.h. Each existing LSM has been updated to
>> include it's LSMID in the lsm_id.
>>
>> The LSM ID values are sequential, with the oldest module
>> LSM_ID_CAPABILITY being the lowest value and the existing modules
>> numbered in the order they were included in the main line kernel.
>> This is an arbitrary convention for assigning the values, but
>> none better presents itself. The value 0 is defined as being invalid.
>> The values 1-99 are reserved for any special case uses which may
>> arise in the future. This may include attributes of the LSM
>> infrastructure itself, possibly related to namespacing or network
>> attribute management. A special range is identified for such attributes
>> to help reduce confusion for developers unfamiliar with LSMs.
>>
>> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
>> ---
>> Documentation/userspace-api/index.rst | 1 +
>> Documentation/userspace-api/lsm.rst | 55 +++++++++++++++++++++++++++
>> include/linux/lsm_hooks.h | 18 ++++++++-
>> include/uapi/linux/lsm.h | 55 +++++++++++++++++++++++++++
>> security/apparmor/lsm.c | 9 ++++-
>> security/bpf/hooks.c | 13 ++++++-
>> security/commoncap.c | 8 +++-
>> security/landlock/cred.c | 2 +-
>> security/landlock/fs.c | 2 +-
>> security/landlock/ptrace.c | 2 +-
>> security/landlock/setup.c | 6 +++
>> security/landlock/setup.h | 1 +
>> security/loadpin/loadpin.c | 9 ++++-
>> security/lockdown/lockdown.c | 8 +++-
>> security/safesetid/lsm.c | 9 ++++-
>> security/security.c | 12 +++---
>> security/selinux/hooks.c | 11 +++++-
>> security/smack/smack_lsm.c | 9 ++++-
>> security/tomoyo/tomoyo.c | 9 ++++-
>> security/yama/yama_lsm.c | 8 +++-
>> 20 files changed, 226 insertions(+), 21 deletions(-)
>> create mode 100644 Documentation/userspace-api/lsm.rst
>> create mode 100644 include/uapi/linux/lsm.h
> Mostly just nitpicky stuff below ...
Nitpicky is fine.
>> diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
>> index 0a5ba81f7367..6f2cabb79ec4 100644
>> --- a/include/linux/lsm_hooks.h
>> +++ b/include/linux/lsm_hooks.h
>> @@ -1665,6 +1665,20 @@ struct security_hook_heads {
>> #undef LSM_HOOK
>> } __randomize_layout;
>>
>> +/**
>> + * struct lsm_id - identify a Linux Security Module.
> According to the kernel-doc documentation it looks like "identify"
> should be capitalized.
>
> * https://docs.kernel.org/doc-guide/kernel-doc.html
I'll fix this, and the next as well. Thanks for pointing it out.
>> + * @lsm: Name of the LSM. Must be approved by the LSM maintainers.
>> + * @id: LSM ID number from uapi/linux/lsm.h
>> + * @attrs_used: Which attributes this LSM supports.
> In a bit of a reversal to the above comment, it appears that the
> parameter descriptions should not start with a capital and should not
> end with punctuation:
>
> * @lsm: name of the LSM, must be approved by the LSM maintainers
>
>> + * Contains the information that identifies the LSM.
>> + */
>> +struct lsm_id {
>> + const u8 *lsm;
>> + u32 id;
>> + u64 attrs_used;
>> +};
>> @@ -1708,7 +1722,7 @@ extern struct security_hook_heads security_hook_heads;
>> extern char *lsm_names;
>>
>> extern void security_add_hooks(struct security_hook_list *hooks, int count,
>> - const char *lsm);
>> + struct lsm_id *lsmid);
> We should be able to mark @lsmid as a const, right?
At this point, yes, but the const would have to come off when
the "slot" field is added to lsm_id in the upcoming stacking patches.
I can mark it const for now if it is important.
>> diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
>> new file mode 100644
>> index 000000000000..61a91b7d946f
>> --- /dev/null
>> +++ b/include/uapi/linux/lsm.h
>> @@ -0,0 +1,55 @@
>> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
>> +/*
>> + * Linux Security Modules (LSM) - User space API
>> + *
>> + * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
>> + * Copyright (C) 2022 Intel Corporation
>> + */
> This file should be added to the SECURITY SUBSYSTEM section in MAINTAINERS:
>
> F: include/uapi/linux/lsm.h
S'truth.
>> +#ifndef _UAPI_LINUX_LSM_H
>> +#define _UAPI_LINUX_LSM_H
>> +
>> +/*
>> + * ID values to identify security modules.
>> + * A system may use more than one security module.
>> + *
>> + * A value of 0 is considered invalid.
>> + * Values 1-99 are reserved for future use.
>> + * The interface is designed to extend to attributes beyond those which
>> + * are active today. Currently all the attributes are specific to the
>> + * individual modules. The LSM infrastructure itself has no variable state,
>> + * but that may change. One proposal would allow loadable modules, in which
>> + * case an attribute such as LSM_IS_LOADABLE might identify the dynamic
>> + * modules. Another potential attribute could be which security modules is
>> + * associated withnetwork labeling using netlabel. Another possible attribute
>> + * could be related to stacking behavior in a namespaced environment.
>> + * While it would be possible to intermingle the LSM infrastructure attribute
>> + * values with the security module provided values, keeping them separate
>> + * provides a clearer distinction.
>> + */
> As this is in a UAPI file, let's avoid speculation and stick to just
> the current facts. Anything we write here with respect to the future
> is likely to be wrong so let's not tempt fate.
Sure. I'll leave the rationale to the take message.
> Once I reached patch 3/8 I also realized that we may want to have more
> than just 0/invalid as a sentinel value, or at the very least we need
> to redefine 0 as something slightly different if for no other reason
> than we in fs/proc/base.c. I know it seems a little trivial, but
> since we're talking about values that will be used in the UAPI I think
> we need to give it some thought and discussion. The only think I can
> think of right now is to redefine 0 as "undefined", which isn't that
> far removed from "invalid" and will not look too terrible in patch 3/8
> - thoughts?
I originally had LSM_ID_INVALID for 0, but there was an objection.
It's not really invalid or undefined, it is reserved as not being an LSM id.
How about LSM_ID_NALSMID or LSM_ID_NOTALSMID for 0? sort of like NAN for
Not A Number.
> With all that in mind, I would suggest something like this:
>
> /*
> * ID tokens to identify Linux Security Modules (LSMs)
> *
> * These token values are used to uniquely identify specific LSMs
> * in the kernel as well in the kernel's LSM userspace API.
> *
> * A value of zero/0 is considered undefined and should not be used
> * outside of the kernel, values 1-99 are reserved for potential
> * future use.
> */
> #define LSM_ID_UNDEF 0
Fine, although I'd go with LSM_ID_NALSMID
>> +#define LSM_ID_CAPABILITY 100
>> +#define LSM_ID_SELINUX 101
>> +#define LSM_ID_SMACK 102
>> +#define LSM_ID_TOMOYO 103
>> +#define LSM_ID_IMA 104
>> +#define LSM_ID_APPARMOR 105
>> +#define LSM_ID_YAMA 106
>> +#define LSM_ID_LOADPIN 107
>> +#define LSM_ID_SAFESETID 108
>> +#define LSM_ID_LOCKDOWN 109
>> +#define LSM_ID_BPF 110
>> +#define LSM_ID_LANDLOCK 111
>> +
>> +/*
>> + * LSM_ATTR_XXX values identify the /proc/.../attr entry that the
>> + * context represents. Not all security modules provide all of these
>> + * values. Some security modules provide none of them.
>> + */
> I'd rather see text closer to this:
>
> /*
> * LSM attributes
> *
> * The LSM_ATTR_XXX definitions identify different LSM
> * attributes which are used in the kernel's LSM userspace API.
> * Support for these attributes vary across the different LSMs,
> * none are required.
> */
If you like that better I'm completely willing to adopt it.
>> +#define LSM_ATTR_CURRENT 0x0001
>> +#define LSM_ATTR_EXEC 0x0002
>> +#define LSM_ATTR_FSCREATE 0x0004
>> +#define LSM_ATTR_KEYCREATE 0x0008
>> +#define LSM_ATTR_PREV 0x0010
>> +#define LSM_ATTR_SOCKCREATE 0x0020
>> +
>> +#endif /* _UAPI_LINUX_LSM_H */
>> diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
>> index c6728a629437..63ea2a995987 100644
>> --- a/security/apparmor/lsm.c
>> +++ b/security/apparmor/lsm.c
>> @@ -24,6 +24,7 @@
>> #include <linux/zstd.h>
>> #include <net/sock.h>
>> #include <uapi/linux/mount.h>
>> +#include <uapi/linux/lsm.h>
>>
>> #include "include/apparmor.h"
>> #include "include/apparmorfs.h"
>> @@ -1217,6 +1218,12 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
>> .lbs_task = sizeof(struct aa_task_ctx),
>> };
>>
>> +static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
>> + .lsm = "apparmor",
>> + .id = LSM_ID_APPARMOR,
>> + .attrs_used = LSM_ATTR_CURRENT | LSM_ATTR_PREV | LSM_ATTR_EXEC,
>> +};
> Perhaps mark this as const in addition to ro_after_init? This applies
> to all the other @lsm_id defs in this patch too.
As I mentioned above, the lsm_id will eventually get changed during the
registration process. I can add the const for now, knowing full well that
it will be removed before long.
>> diff --git a/security/bpf/hooks.c b/security/bpf/hooks.c
>> index e5971fa74fd7..20983ae8d31f 100644
>> --- a/security/bpf/hooks.c
>> +++ b/security/bpf/hooks.c
>> @@ -5,6 +5,7 @@
>> */
>> #include <linux/lsm_hooks.h>
>> #include <linux/bpf_lsm.h>
>> +#include <uapi/linux/lsm.h>
>>
>> static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
>> #define LSM_HOOK(RET, DEFAULT, NAME, ...) \
>> @@ -15,9 +16,19 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
>> LSM_HOOK_INIT(task_free, bpf_task_storage_free),
>> };
>>
>> +/*
>> + * slot has to be LSMBLOB_NEEDED because some of the hooks
>> + * supplied by this module require a slot.
>> + */
> I don't think we need the above comment here, right?
Whoops. I thought I'd gotten that one.
>
> --
> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data
2023-01-11 21:01 ` Paul Moore
@ 2023-01-12 0:36 ` Casey Schaufler
2023-01-12 20:26 ` Paul Moore
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-12 0:36 UTC (permalink / raw)
To: Paul Moore
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On 1/11/2023 1:01 PM, Paul Moore wrote:
> On Mon, Jan 9, 2023 at 1:07 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> As LSMs are registered add their lsm_id pointers to a table.
>> This will be used later for attribute reporting.
>>
>> Determine the number of possible security modules based on
>> their respective CONFIG options. This allows the number to be
>> known at build time. This allows data structures and tables
>> to use the constant.
>>
>> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
>> ---
>> include/linux/security.h | 2 ++
>> security/security.c | 44 +++++++++++++++++++++++++++++++++-------
>> 2 files changed, 39 insertions(+), 7 deletions(-)
>>
>> diff --git a/include/linux/security.h b/include/linux/security.h
>> index 5b67f208f7de..33ed1860b96f 100644
>> --- a/include/linux/security.h
>> +++ b/include/linux/security.h
>> @@ -138,6 +138,8 @@ enum lockdown_reason {
>> };
>>
>> extern const char *const lockdown_reasons[LOCKDOWN_CONFIDENTIALITY_MAX+1];
>> +extern u32 lsm_active_cnt;
>> +extern struct lsm_id *lsm_idlist[];
>>
>> /* These functions are in security/commoncap.c */
>> extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
>> diff --git a/security/security.c b/security/security.c
>> index 07a8fe7f92bf..a590fa98ddd6 100644
>> --- a/security/security.c
>> +++ b/security/security.c
>> @@ -28,12 +28,29 @@
>> #include <linux/backing-dev.h>
>> #include <linux/string.h>
>> #include <linux/msg.h>
>> +#include <uapi/linux/lsm.h>
>> #include <net/flow.h>
>>
>> #define MAX_LSM_EVM_XATTR 2
>>
>> -/* How many LSMs were built into the kernel? */
>> -#define LSM_COUNT (__end_lsm_info - __start_lsm_info)
>> +/*
>> + * How many LSMs are built into the kernel as determined at
>> + * build time. Used to determine fixed array sizes.
>> + * The capability module is accounted for by CONFIG_SECURITY
>> + */
>> +#define LSM_COUNT ( \
>> + (IS_ENABLED(CONFIG_SECURITY) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_SELINUX) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_SMACK) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_TOMOYO) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_IMA) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_APPARMOR) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_YAMA) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_LOADPIN) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_SAFESETID) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_LOCKDOWN_LSM) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_BPF_LSM) ? 1 : 0) + \
>> + (IS_ENABLED(CONFIG_SECURITY_LANDLOCK) ? 1 : 0))
>>
>> /*
>> * These are descriptions of the reasons that can be passed to the
>> @@ -90,7 +107,7 @@ static __initdata const char *chosen_major_lsm;
>> static __initconst const char * const builtin_lsm_order = CONFIG_LSM;
>>
>> /* Ordered list of LSMs to initialize. */
>> -static __initdata struct lsm_info **ordered_lsms;
>> +static __initdata struct lsm_info *ordered_lsms[LSM_COUNT + 1];
> I'm guessing this 'LSM_COUNT + 1' logic is basically just copied from
> ordered_lsm_init() - which is okay - but can you remind me why it is
> 'LSM_COUNT + 1' and not just 'LSM_COUNT'? Based on the LSM_COUNT
> macro above it seems like LSM_COUNT should be enough, no?
Yup. I didn't spend a lot of time investigating why the + 1.
I'll look more deeply and correct if appropriate.
>> static __initdata struct lsm_info *exclusive;
>>
>> static __initdata bool debug;
>> @@ -341,13 +358,16 @@ static void __init report_lsm_order(void)
>> pr_cont("\n");
>> }
>>
>> +/*
>> + * Current index to use while initializing the lsm id list.
>> + */
>> +u32 lsm_active_cnt __lsm_ro_after_init;
>> +struct lsm_id *lsm_idlist[LSM_COUNT] __lsm_ro_after_init;
>> +
>> static void __init ordered_lsm_init(void)
>> {
>> struct lsm_info **lsm;
>>
>> - ordered_lsms = kcalloc(LSM_COUNT + 1, sizeof(*ordered_lsms),
>> - GFP_KERNEL);
>> -
>> if (chosen_lsm_order) {
>> if (chosen_major_lsm) {
>> pr_warn("security=%s is ignored because it is superseded by lsm=%s\n",
>> @@ -388,7 +408,7 @@ static void __init ordered_lsm_init(void)
>> for (lsm = ordered_lsms; *lsm; lsm++)
>> initialize_lsm(*lsm);
>>
>> - kfree(ordered_lsms);
>> + init_debug("lsm count = %d\n", lsm_active_cnt);
>> }
> Given 86ef3c735ec8 ("LSM: Better reporting of actual LSMs at boot"),
> is this needed?
None of what comes out from lsm.debug is strictly necessary, and
human or script can parse "initializing lsm=", but sometimes the
number of LSMs is interesting.
>
> --
> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs
2023-01-11 21:01 ` Paul Moore
@ 2023-01-12 0:37 ` Casey Schaufler
0 siblings, 0 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-01-12 0:37 UTC (permalink / raw)
To: Paul Moore
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic, linux-fsdevel, casey
On 1/11/2023 1:01 PM, Paul Moore wrote:
> On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> Use the LSM ID number instead of the LSM name to identify which
>> security module's attibute data should be shown in /proc/self/attr.
>> The security_[gs]etprocattr() functions have been changed to expect
>> the LSM ID. The change from a string comparison to an integer comparison
>> in these functions will provide a minor performance improvement.
>>
>> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
>> Cc: linux-fsdevel@vger.kernel.org
>> ---
>> fs/proc/base.c | 29 +++++++++++++++--------------
>> fs/proc/internal.h | 2 +-
>> include/linux/security.h | 11 +++++------
>> security/security.c | 11 +++++------
>> 4 files changed, 26 insertions(+), 27 deletions(-)
> ..
>
>> diff --git a/fs/proc/base.c b/fs/proc/base.c
>> index 9e479d7d202b..9328b6b07dfc 100644
>> --- a/fs/proc/base.c
>> +++ b/fs/proc/base.c
>> @@ -2837,27 +2838,27 @@ static const struct inode_operations proc_##LSM##_attr_dir_inode_ops = { \
>>
>> #ifdef CONFIG_SECURITY_SMACK
>> static const struct pid_entry smack_attr_dir_stuff[] = {
>> - ATTR("smack", "current", 0666),
>> + ATTR(LSM_ID_SMACK, "current", 0666),
>> };
>> LSM_DIR_OPS(smack);
>> #endif
>>
>> #ifdef CONFIG_SECURITY_APPARMOR
>> static const struct pid_entry apparmor_attr_dir_stuff[] = {
>> - ATTR("apparmor", "current", 0666),
>> - ATTR("apparmor", "prev", 0444),
>> - ATTR("apparmor", "exec", 0666),
>> + ATTR(LSM_ID_APPARMOR, "current", 0666),
>> + ATTR(LSM_ID_APPARMOR, "prev", 0444),
>> + ATTR(LSM_ID_APPARMOR, "exec", 0666),
>> };
>> LSM_DIR_OPS(apparmor);
>> #endif
>>
>> static const struct pid_entry attr_dir_stuff[] = {
>> - ATTR(NULL, "current", 0666),
>> - ATTR(NULL, "prev", 0444),
>> - ATTR(NULL, "exec", 0666),
>> - ATTR(NULL, "fscreate", 0666),
>> - ATTR(NULL, "keycreate", 0666),
>> - ATTR(NULL, "sockcreate", 0666),
>> + ATTR(0, "current", 0666),
>> + ATTR(0, "prev", 0444),
>> + ATTR(0, "exec", 0666),
>> + ATTR(0, "fscreate", 0666),
>> + ATTR(0, "keycreate", 0666),
>> + ATTR(0, "sockcreate", 0666),
> See the discussion in patch 1/8, we should use a macro instead of a 0
> here (although the exact macro definition is very much up for
> discussion):
>
> ATTR(LSM_ID_UNDEF, "current", 0666),
Or LSM_ID_NALSMID, or whatever. Agreed.
>
> --
> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-11 21:07 ` Paul Moore
@ 2023-01-12 1:37 ` Casey Schaufler
2023-01-12 21:37 ` Paul Moore
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-12 1:37 UTC (permalink / raw)
To: Paul Moore
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic, casey
On 1/11/2023 1:07 PM, Paul Moore wrote:
> On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> Create a system call lsm_get_self_attr() to provide the security
>> module maintained attributes of the current process. Historically
>> these attributes have been exposed to user space via entries in
>> procfs under /proc/self/attr.
>>
>> Attributes are provided as a collection of lsm_ctx structures
>> which are placed into a user supplied buffer. Each structure
>> identifys the size of the attribute, and the attribute value.
> ^^^
> identifies
Pluralses are hard in the vicinity of 'y's. ;)
>> The format of the attribute value is defined by the security
>> module, but will always be \0 terminated. The ctx_len value
>> will always be strlen(ctx)+1.
> I don't want to limit ourselves to only sending string values as
> attributes as who knows what we might need to do in the future, and
> the struct was originally designed to support both strings and binary
> data. I would suggest changing the sentences above to something like
> this:
Part of creating a sane and sensible API is setting rational limitations.
While a "context" has always allowed for a binary value it has always
been a user friendly, nul terminated string. The one case where someone
proposed otherwise was my "hideous" format for compound contexts, and we
know how well that was received. If we're serious about cleaning up our
API let's quit bending over to support something no one is using and that
we'd prefer they didn't.
That's my preference. Is there anyone who wants a binary interface, or any
really good reason to provide one? I'm not going to stand fast on a strings
only interface, but it would make it significantly cleaner if we had one.
>
> The format of the attribute value is defined by the individual LSM,
> with the attribute itself stored in @ctx and the length of the
> attribute stored in @ctx_len. Both strings and arbitrary binary
> attributes are supported, but strings should be NULL terminated and
> @ctx_len should be equal to `strlen(@ctx) + 1`.
>
>> ---------------------------
>> | __u32 id |
>> ---------------------------
>> | __u64 flags |
>> ---------------------------
>> | __kernel_size_t ctx_len |
>> ---------------------------
>> | __u8 ctx[ctx_len] |
>> ---------------------------
>> | __u32 id |
>> ---------------------------
>> | __u64 flags |
>> ---------------------------
>> | __kernel_size_t ctx_len |
>> ---------------------------
>> | __u8 ctx[ctx_len] |
>> ---------------------------
> Don't repeat the structure layout in memory twice here, it's
> confusing. I also think it would be easier to read, and arguably more
> useful, to simply copy the struct definition into the description
> instead of the ASCII art column.
OK on both.
> Although, this has got me wondering if we should think about aligning
> the lsm_ctx structs when we are populating them in the kernel; more on
> this below ...
As you say below, we'll need a total_len for this, but OK.
>> ---
>> Documentation/userspace-api/lsm.rst | 9 ++
>> include/linux/syscalls.h | 3 +
>> include/uapi/linux/lsm.h | 21 ++++
>> kernel/sys_ni.c | 3 +
>> security/Makefile | 1 +
>> security/lsm_syscalls.c | 182 ++++++++++++++++++++++++++++
>> 6 files changed, 219 insertions(+)
>> create mode 100644 security/lsm_syscalls.c
> ..
>
>> diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
>> index 33a0ee3bcb2e..a89205c70ffa 100644
>> --- a/include/linux/syscalls.h
>> +++ b/include/linux/syscalls.h
>> @@ -71,6 +71,7 @@ struct clone_args;
>> struct open_how;
>> struct mount_attr;
>> struct landlock_ruleset_attr;
>> +struct lsm_ctx;
>> enum landlock_rule_type;
>>
>> #include <linux/types.h>
>> @@ -1058,6 +1059,8 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
>> asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
>> unsigned long home_node,
>> unsigned long flags);
>> +asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
>> + int flags);
>>
>> /*
>> * Architecture-specific system calls
>> diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
>> index 61a91b7d946f..8674d8c6b326 100644
>> --- a/include/uapi/linux/lsm.h
>> +++ b/include/uapi/linux/lsm.h
>> @@ -9,6 +9,27 @@
>> #ifndef _UAPI_LINUX_LSM_H
>> #define _UAPI_LINUX_LSM_H
>>
>> +#include <linux/types.h>
>> +#include <linux/unistd.h>
>> +
>> +/**
>> + * struct lsm_ctx - LSM context
>> + * @id: the LSM id number, see LSM_ID_XXX
> As mentioned above, it occurred to me that we might want want to pad
> out the lsm_ctx struct to ensure that the "array" of lsm_ctx is nicely
> aligned. I know some systems used to complain about unaligned
> accesses, and even on those that don't complain tend to be faster when
> access are aligned. We can either implicitly align the individual
> lsm_ctx structs or we can add a total length field (in addition to the
> @ctx_len field) so that the padding/alignment is explicit.
>
> Adding an explicit total length field could have some other advantages
> in that it, in conjunction with the existing @flags field, would allow
> an individual LSM to "extend" the lsm_ctx struct to provide additional
> LSM specific information in the case where the single @ctx field was
> not sufficient. Think of it as some additional future proofing in
> addition to explicit padding.
I'm not sure whether to call it future proofing or confusion assurance,
and I certainly wouldn't encourage such use. On the other hand, I wouldn't
let that get in the way of the performant aligned interface, so I'm good
with the len field in addition to the ctx_len.
>> + * @flags: context specifier and LSM specific flags
> * @flags: LSM specific flags
>
> Only the individual LSM specified in @id should ever interpret @flags or @ctx.
Sure.
>> + * @ctx_len: the size of @ctx
>> + * @ctx: the LSM context, a nul terminated string
> * @ctx: the LSM context value
As above, I would like to make this a string. I won't fight over it however.
>> + * @ctx in a nul terminated string.
>> + * (strlen(@ctx) < @ctx_len) is always true.
>> + * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
>> + */
> Let's rework the extra description too based on the comments above.
> For the sake of clarity, here is what I'm currently thinking (comments
> and feedback are encouraged):
>
> /**
> * struct lsm_ctx - LSM context information
> * @id: the LSM ID token, see LSM_ID_XXX
> * @flags: LSM specific flags
> * @len: length of the lsm_ctx struct + extra (?) + padding
> * @ctx_len: the size of @ctx
> * @ctx: the LSM context value
> *
> * The @len field MUST be equal to size of the lsm_ctx struct
> * plus any additional padding and/or data placed after @ctx.
> *
> * In all cases @ctx_len MUST be equal to length of @ctx. If
> * @ctx is a string value, it should be nul terminated with
> * @ctx_len equal to `strlen(@ctx) + 1`. Binary @ctx values
> * are supported.
> *
> * The @flags and @ctx fields SHOULD only be interpreted by the
> * LSM specified by @id; they MUST be set to zero/0 when not used.
> */
> struct lsm_ctx {
> __u32 id;
> __u64 flags;
> __kernel_size_t len;
> __kernel_size_t ctx_len;
> __u8 ctx[];
> };
Yes, if there's a convincing argument for binary values.
>> diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
>> new file mode 100644
>> index 000000000000..55e8bf61ac8a
>> --- /dev/null
>> +++ b/security/lsm_syscalls.c
>> @@ -0,0 +1,182 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * System calls implementing the Linux Security Module API.
>> + *
>> + * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
>> + * Copyright (C) 2022 Intel Corporation
>> + */
>> +
>> +#include <asm/current.h>
>> +#include <linux/compiler_types.h>
>> +#include <linux/err.h>
>> +#include <linux/errno.h>
>> +#include <linux/security.h>
>> +#include <linux/stddef.h>
>> +#include <linux/syscalls.h>
>> +#include <linux/types.h>
>> +#include <linux/lsm_hooks.h>
>> +#include <uapi/linux/lsm.h>
>> +
>> +struct attrs_used_map {
>> + char *name;
>> + int attrs_used;
> Based on the usage below it really seems like @attrs_used should just
> be @attr, yes? That said, I'm not too bothered by it either way so if
> you really love @attrs_used that's fine.
Potato - Potatoe - Seeing the same field name in different structs at
the same time gives me a headache, but I'm not going to quibble.
>> +};
>> +
>> +static const struct attrs_used_map lsm_attr_names[] = {
> We can probably just call this "attr_map" right? I mean the "used"
> portion is pretty inherent in the fact that we're defining a mapping
> :)
Sure.
>> + { .name = "current", .attrs_used = LSM_ATTR_CURRENT, },
>> + { .name = "exec", .attrs_used = LSM_ATTR_EXEC, },
>> + { .name = "fscreate", .attrs_used = LSM_ATTR_FSCREATE, },
>> + { .name = "keycreate", .attrs_used = LSM_ATTR_KEYCREATE, },
>> + { .name = "prev", .attrs_used = LSM_ATTR_PREV, },
>> + { .name = "sockcreate", .attrs_used = LSM_ATTR_SOCKCREATE, },
>> +};
>> +
>> +static int attr_used_index(u32 flags)
> Since you can only return one index value at a time in this function
> you can't really support multiple attribute bits set in the @flags
> parameter so why not change the prototype to better match the required
> usage, example:
>
> static int attr_index(u32 attr)
>
>> +{
>> + int i;
>> +
>> + if (flags == 0)
>> + return -EINVAL;
>> +
>> + for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
>> + if ((lsm_attr_names[i].attrs_used & flags) == flags)
>> + return i;
> Given the above, why not simplify the above test to this:
>
> if (lsm_attr_name[i].attr == attr)
> return i;
That won't work in the case where an LSM supports more than one attribute.
>
> If we don't care about failing fast in the case of being passed 0 (why
> would we?) we can define this function as follows:
>
> static int attr_index(u32 attr)
> {
> int i;
> for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
> if (lsm_attr_names[i].attr == attr)
> return i;
> return -EINVAL;
> }
>
> If we wanted to streamline things even further we could define
> attr_map a bit differently and drop the loop in attr_index(). Yes, it
> does waste attr_map[0], but I don't think anyone is going to be too
> upset about one wasted index if it scales better.
>
> static const struct attr_map[] = {
> [LSM_ATTR_CURRENT] = { .name = "current", .attr = LSM_ATTR_CURRENT },
> [LSM_ATTR_EXEC] = { .name = "exec", .attr = LSM_ATTR_EXEC },
> ...
> };
>
> static int attr_index(u32 attr)
> {
> if (attr == 0 || attr >= ARRAY_SIZE(attr_map))
> return -EINVAL;
> return attr;
> }
>
> If you did this you could probably also convert attr_map from a struct
> to a simple array of strings as the attribute value would be the
> associated index.
>
>> +/**
>> + * sys_lsm_get_self_attr - Return current task's security module attributes
>> + * @ctx: the LSM contexts
>> + * @size: size of @ctx, updated on return
>> + * @flags: which attribute to return
>> + *
>> + * Returns the calling task's LSM contexts. On success this
>> + * function returns the number of @ctx array elements. This value
>> + * may be zero if there are no LSM contexts assigned. If @size is
>> + * insufficient to contain the return data -E2BIG is returned and
>> + * @size is set to the minimum required size. In all other cases
>> + * a negative value indicating the error is returned.
>> + */
>> +SYSCALL_DEFINE3(lsm_get_self_attr,
>> + struct lsm_ctx __user *, ctx,
>> + size_t __user *, size,
>> + u32, flags)
>> +{
>> + int i;
>> + int rc = 0;
>> + int len;
>> + int attr;
>> + int count = 0;
>> + void *curr;
>> + char *cp;
>> + char *np;
>> + char **interum_ctx;
>> + size_t total_size = 0;
>> + struct lsm_ctx *ip;
>> + struct lsm_ctx *interum;
>> + struct lsm_ctx *final = NULL;
>> +
>> + attr = attr_used_index(flags);
>> + if (attr < 0)
>> + return attr;
>> +
>> + interum = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
>> + sizeof(*interum), GFP_KERNEL);
>> + if (interum == NULL)
>> + return -ENOMEM;
>> + ip = interum;
>> +
>> + interum_ctx = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
>> + sizeof(*interum_ctx), GFP_KERNEL);
>> + if (interum_ctx == NULL) {
>> + kfree(interum);
>> + return -ENOMEM;
>> + }
>> +
>> + for (i = 0; i < lsm_active_cnt; i++) {
>> + if ((lsm_idlist[i]->attrs_used &
>> + lsm_attr_names[attr].attrs_used) == 0)
>> + continue;
>> +
>> + len = security_getprocattr(current, lsm_idlist[i]->id,
>> + lsm_attr_names[attr].name,
>> + &cp);
>> + if (len <= 0)
>> + continue;
>> +
>> + ip->id = lsm_idlist[i]->id;
>> + ip->flags = lsm_attr_names[attr].attrs_used;
>> + interum_ctx[count] = cp;
>> +
>> + /*
>> + * A security module that returns a binary attribute
>> + * will need to identify itself to prevent string
>> + * processing.
>> + *
>> + * At least one security module adds a \n at the
>> + * end of a context to make it look nicer. Change
>> + * that to a \0 so that user space doesn't have to
>> + * work around it.
>> + *
>> + * Security modules have been inconsistent about
>> + * including the \0 terminator in the size. If it's
>> + * not there make space for it.
>> + *
>> + * The length returned will reflect the length of
>> + * the string provided by the security module, which
>> + * may not match what getprocattr returned.
>> + */
>> + np = strnchr(cp, len, '\n');
>> + if (np != NULL)
>> + *np = '\0';
>> + ip->ctx_len = strnlen(cp, len) + 1;
>> + total_size += sizeof(*interum) + ip->ctx_len;
>> + ip++;
>> + count++;
>> + }
>> +
>> + if (count == 0)
>> + goto free_out;
>> +
>> + final = kzalloc(total_size, GFP_KERNEL);
>> + if (final == NULL) {
>> + rc = -ENOMEM;
>> + goto free_out;
>> + }
>> +
>> + curr = final;
>> + ip = interum;
>> + for (i = 0; i < count; i++) {
>> + memcpy(curr, ip, sizeof(*interum));
>> + curr += sizeof(*interum);
>> + if (ip->ctx_len > 1)
>> + memcpy(curr, interum_ctx[i], ip->ctx_len - 1);
>> + curr += ip->ctx_len;
>> + ip++;
>> + }
>> +
>> + if (get_user(len, size)) {
>> + rc = -EFAULT;
>> + goto free_out;
>> + }
>> + if (total_size > len) {
>> + rc = -ERANGE;
>> + if (put_user(total_size, size) != 0)
>> + rc = -EFAULT;
>> + goto free_out;
>> + }
>> + if (copy_to_user(ctx, final, total_size) != 0 ||
>> + put_user(total_size, size) != 0)
>> + rc = -EFAULT;
>> + else
>> + rc = count;
>> +
>> +free_out:
>> + for (i = 0; i < count; i++)
>> + kfree(interum_ctx[i]);
>> + kfree(interum_ctx);
>> + kfree(interum);
>> + kfree(final);
>> + return rc;
>> +}
> Hmm. That's all kinda painful isn't it?
It's not so bad as all that. Well, maybe.
> I think trying to reuse
> security_getprocattr() is doing more harm than good with all the
> awkward handling necessary to ensure consistent output. While it's
> nice to be able to reuse existing interfaces, one of the main
> motivations behind the LSM syscall effort is to create a cleaner
> interface that was designed from the beginning to support multiple
> LSMs and provide a level of extensibility that we do not currently
> have with the procfs interface. Hacking together all our old crap to
> make this happen seems very wrong to me.
>
> With that in mind I would like to propose we introduce a new LSM hook
> to populate a lsm_ctx struct based on a LSM_ATTR_XXX value:
>
> int security_sys_getselfattr(u64 attr, struct lsm_ctx __user *ctx,
> size_t *len);
>
> The individual LSMs would be responsible for fully populating their
> lsm_ctx struct specified by @ctx (note the __user tagging) and would
> return 0 on success or negative values on failure. The maximum size
> of the @ctx buffer would be passed in via @len and the used size would
> be returned in @len; in the case of an too-small @ctx, -E2BIG would be
> returned and the necessary size would be returned in @len (just as
> discussed for the syscall itself). This way the LSM layer syscall
> function would not need to worry about properly terminating the
> lsm_ctx::ctx field, setting any LSM specific flags, etc. Passing the
> __user pointer directly not only greatly simplifies the LSM layer, it
> also has the potential to reduce the number of allocations/copies.
That's going to be a lot of duplicate code to add to each LSM. Yes,
we can do that, but I don't see it as any cleaner.
> Taking this approach should shrink the LSM layer syscall function to
> simply needing to validate the passed @flags before looping through
> the LSMs calling security_sys_getselfattr(). The lsm_ctx pointer
> would need to be incremented appropriately for each call, and a total
> length/size count would need to be maintained in case the buffer is
> too small, but those should be relatively minor things.
I think this pushed the complexity downward. If we only had one LSM
it would be a wash. With each LSM having to provide this we're multiplying
the complexity rather than reducing it.
But again, I'll listen to reason.
>
> --
> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 5/8] LSM: Create lsm_module_list system call
2023-01-11 21:07 ` Paul Moore
@ 2023-01-12 1:39 ` Casey Schaufler
2023-01-12 21:43 ` Paul Moore
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-01-12 1:39 UTC (permalink / raw)
To: Paul Moore
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic, casey
On 1/11/2023 1:07 PM, Paul Moore wrote:
> On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> Create a system call to report the list of Linux Security Modules
>> that are active on the system. The list is provided as an array
>> of LSM ID numbers.
>>
>> The calling application can use this list determine what LSM
>> specific actions it might take. That might include chosing an
>> output format, determining required privilege or bypassing
>> security module specific behavior.
>>
>> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
>> ---
>> Documentation/userspace-api/lsm.rst | 3 +++
>> include/linux/syscalls.h | 1 +
>> kernel/sys_ni.c | 1 +
>> security/lsm_syscalls.c | 41 +++++++++++++++++++++++++++++
>> 4 files changed, 46 insertions(+)
> ..
>
>> diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
>> index 55e8bf61ac8a..92af1fcaa654 100644
>> --- a/security/lsm_syscalls.c
>> +++ b/security/lsm_syscalls.c
>> @@ -180,3 +180,44 @@ SYSCALL_DEFINE3(lsm_get_self_attr,
>> kfree(final);
>> return rc;
>> }
>> +
>> +/**
>> + * sys_lsm_module_list - Return a list of the active security modules
>> + * @ids: the LSM module ids
>> + * @size: size of @ids, updated on return
>> + * @flags: reserved for future use, must be zero
>> + *
>> + * Returns a list of the active LSM ids. On success this function
>> + * returns the number of @ids array elements. This value may be zero
>> + * if there are no LSMs active. If @size is insufficient to contain
>> + * the return data -E2BIG is returned and @size is set to the minimum
>> + * required size. In all other cases a negative value indicating the
>> + * error is returned.
>> + */
>> +SYSCALL_DEFINE3(lsm_module_list,
>> + u32 __user *, ids,
>> + size_t __user *, size,
>> + u64, flags)
>> +{
>> + size_t total_size = lsm_active_cnt * sizeof(*ids);
>> + size_t usize;
>> + int i;
>> +
>> + if (flags)
>> + return -EINVAL;
>> +
>> + if (get_user(usize, size))
>> + return -EFAULT;
>> +
>> + if (put_user(total_size, size) != 0)
>> + return -EFAULT;
>> +
>> + if (usize < total_size)
>> + return -E2BIG;
>> +
>> + for (i = 0; i < lsm_active_cnt; i++)
>> + if (put_user(lsm_idlist[i]->id, ids++))
>> + return -EFAULT;
>> +
>> + return lsm_active_cnt;
>> +}
> Similar to my comments in 4/8, I would probably create a new LSM hook
> for this syscall so that the lsm_ctx is passed through the LSM layer
> directly to the target LSM:
>
> int security_sys_setselfattr(u64 attr, struct lsm_ctx __user *ctx,
> size_t len);
That seems like a whole lot of work when you can just look it up
in an existing table.
> --
> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
2023-01-11 21:07 ` Paul Moore
@ 2023-01-12 14:40 ` Arnd Bergmann
2023-01-12 21:39 ` Paul Moore
2023-02-02 4:53 ` Serge Hallyn (shallyn)
2023-02-14 17:41 ` Mickaël Salaün
3 siblings, 1 reply; 32+ messages in thread
From: Arnd Bergmann @ 2023-01-12 14:40 UTC (permalink / raw)
To: Casey Schaufler, casey.schaufler, Paul Moore, linux-security-module
Cc: jmorris, Kees Cook, john.johansen, Tetsuo Handa,
stephen.smalley.work, linux-kernel, linux-api, mic
On Mon, Jan 9, 2023, at 19:07, Casey Schaufler wrote:
> +/**
> + * struct lsm_ctx - LSM context
> + * @id: the LSM id number, see LSM_ID_XXX
> + * @flags: context specifier and LSM specific flags
> + * @ctx_len: the size of @ctx
> + * @ctx: the LSM context, a nul terminated string
> + *
> + * @ctx in a nul terminated string.
> + * (strlen(@ctx) < @ctx_len) is always true.
> + * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
> + */
> +struct lsm_ctx {
> + __u32 id;
> + __u64 flags;
> + __kernel_size_t ctx_len;
> + __u8 ctx[];
> +};
I think this should be changed to be the same layout on
all architectures regardless of __u64 alignment and
sizeof(__kernel_size_t) differences, to avoid the need
for compat syscalls and explicit clearing of the
internal padding.
Maybe just use __u64 fields for all three integers?
Arnd
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data
2023-01-12 0:36 ` Casey Schaufler
@ 2023-01-12 20:26 ` Paul Moore
0 siblings, 0 replies; 32+ messages in thread
From: Paul Moore @ 2023-01-12 20:26 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Wed, Jan 11, 2023 at 7:36 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> On 1/11/2023 1:01 PM, Paul Moore wrote:
> > On Mon, Jan 9, 2023 at 1:07 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> >> As LSMs are registered add their lsm_id pointers to a table.
> >> This will be used later for attribute reporting.
> >>
> >> Determine the number of possible security modules based on
> >> their respective CONFIG options. This allows the number to be
> >> known at build time. This allows data structures and tables
> >> to use the constant.
> >>
> >> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> >> ---
> >> include/linux/security.h | 2 ++
> >> security/security.c | 44 +++++++++++++++++++++++++++++++++-------
> >> 2 files changed, 39 insertions(+), 7 deletions(-)
...
> >> diff --git a/security/security.c b/security/security.c
> >> index 07a8fe7f92bf..a590fa98ddd6 100644
> >> --- a/security/security.c
> >> +++ b/security/security.c
> >> @@ -388,7 +408,7 @@ static void __init ordered_lsm_init(void)
> >> for (lsm = ordered_lsms; *lsm; lsm++)
> >> initialize_lsm(*lsm);
> >>
> >> - kfree(ordered_lsms);
> >> + init_debug("lsm count = %d\n", lsm_active_cnt);
> >> }
> > Given 86ef3c735ec8 ("LSM: Better reporting of actual LSMs at boot"),
> > is this needed?
>
> None of what comes out from lsm.debug is strictly necessary, and
> human or script can parse "initializing lsm=", but sometimes the
> number of LSMs is interesting.
I guess what I was questioning is if printing the @lsm_active_cnt
variable provides any better information that what is already provided
by commit 86ef3c735ec8? We currently print the enabled/active LSMs
with lsm.debug, printing a count seems a bit redundant to me.
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 1/8] LSM: Identify modules by more than name
2023-01-12 0:05 ` Casey Schaufler
@ 2023-01-12 20:30 ` Paul Moore
0 siblings, 0 replies; 32+ messages in thread
From: Paul Moore @ 2023-01-12 20:30 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Wed, Jan 11, 2023 at 7:05 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> On 1/11/2023 1:00 PM, Paul Moore wrote:
> > On Mon, Jan 9, 2023 at 1:07 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> >> Create a struct lsm_id to contain identifying information
> >> about Linux Security Modules (LSMs). At inception this contains
> >> the name of the module, an identifier associated with the security
> >> module and an integer member "attrs_used" which identifies the API
> >> related data associated with each security module. The initial set
> >> of features maps to information that has traditionaly been available
> >> in /proc/self/attr. They are documented in a new userspace-api file.
> >> Change the security_add_hooks() interface to use this structure.
> >> Change the individual modules to maintain their own struct lsm_id
> >> and pass it to security_add_hooks().
> >>
> >> The values are for LSM identifiers are defined in a new UAPI
> >> header file linux/lsm.h. Each existing LSM has been updated to
> >> include it's LSMID in the lsm_id.
> >>
> >> The LSM ID values are sequential, with the oldest module
> >> LSM_ID_CAPABILITY being the lowest value and the existing modules
> >> numbered in the order they were included in the main line kernel.
> >> This is an arbitrary convention for assigning the values, but
> >> none better presents itself. The value 0 is defined as being invalid.
> >> The values 1-99 are reserved for any special case uses which may
> >> arise in the future. This may include attributes of the LSM
> >> infrastructure itself, possibly related to namespacing or network
> >> attribute management. A special range is identified for such attributes
> >> to help reduce confusion for developers unfamiliar with LSMs.
> >>
> >> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> >> ---
> >> Documentation/userspace-api/index.rst | 1 +
> >> Documentation/userspace-api/lsm.rst | 55 +++++++++++++++++++++++++++
> >> include/linux/lsm_hooks.h | 18 ++++++++-
> >> include/uapi/linux/lsm.h | 55 +++++++++++++++++++++++++++
> >> security/apparmor/lsm.c | 9 ++++-
> >> security/bpf/hooks.c | 13 ++++++-
> >> security/commoncap.c | 8 +++-
> >> security/landlock/cred.c | 2 +-
> >> security/landlock/fs.c | 2 +-
> >> security/landlock/ptrace.c | 2 +-
> >> security/landlock/setup.c | 6 +++
> >> security/landlock/setup.h | 1 +
> >> security/loadpin/loadpin.c | 9 ++++-
> >> security/lockdown/lockdown.c | 8 +++-
> >> security/safesetid/lsm.c | 9 ++++-
> >> security/security.c | 12 +++---
> >> security/selinux/hooks.c | 11 +++++-
> >> security/smack/smack_lsm.c | 9 ++++-
> >> security/tomoyo/tomoyo.c | 9 ++++-
> >> security/yama/yama_lsm.c | 8 +++-
> >> 20 files changed, 226 insertions(+), 21 deletions(-)
> >> create mode 100644 Documentation/userspace-api/lsm.rst
> >> create mode 100644 include/uapi/linux/lsm.h
...
> >> diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
> >> index 0a5ba81f7367..6f2cabb79ec4 100644
> >> --- a/include/linux/lsm_hooks.h
> >> +++ b/include/linux/lsm_hooks.h
> >> @@ -1708,7 +1722,7 @@ extern struct security_hook_heads security_hook_heads;
> >> extern char *lsm_names;
> >>
> >> extern void security_add_hooks(struct security_hook_list *hooks, int count,
> >> - const char *lsm);
> >> + struct lsm_id *lsmid);
> > We should be able to mark @lsmid as a const, right?
>
> At this point, yes, but the const would have to come off when
> the "slot" field is added to lsm_id in the upcoming stacking patches.
> I can mark it const for now if it is important.
Ah, right. Okay, just leave it as-is then.
> >> diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
> >> new file mode 100644
> >> index 000000000000..61a91b7d946f
> >> --- /dev/null
> >> +++ b/include/uapi/linux/lsm.h
> >> @@ -0,0 +1,55 @@
> >> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> >> +/*
> >> + * Linux Security Modules (LSM) - User space API
> >> + *
> >> + * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
> >> + * Copyright (C) 2022 Intel Corporation
> >> + */
> > This file should be added to the SECURITY SUBSYSTEM section in MAINTAINERS:
> >
> > F: include/uapi/linux/lsm.h
>
> S'truth.
>
> >> +#ifndef _UAPI_LINUX_LSM_H
> >> +#define _UAPI_LINUX_LSM_H
> >> +
> >> +/*
> >> + * ID values to identify security modules.
> >> + * A system may use more than one security module.
> >> + *
> >> + * A value of 0 is considered invalid.
> >> + * Values 1-99 are reserved for future use.
> >> + * The interface is designed to extend to attributes beyond those which
> >> + * are active today. Currently all the attributes are specific to the
> >> + * individual modules. The LSM infrastructure itself has no variable state,
> >> + * but that may change. One proposal would allow loadable modules, in which
> >> + * case an attribute such as LSM_IS_LOADABLE might identify the dynamic
> >> + * modules. Another potential attribute could be which security modules is
> >> + * associated withnetwork labeling using netlabel. Another possible attribute
> >> + * could be related to stacking behavior in a namespaced environment.
> >> + * While it would be possible to intermingle the LSM infrastructure attribute
> >> + * values with the security module provided values, keeping them separate
> >> + * provides a clearer distinction.
> >> + */
> > As this is in a UAPI file, let's avoid speculation and stick to just
> > the current facts. Anything we write here with respect to the future
> > is likely to be wrong so let's not tempt fate.
>
> Sure. I'll leave the rationale to the take message.
>
> > Once I reached patch 3/8 I also realized that we may want to have more
> > than just 0/invalid as a sentinel value, or at the very least we need
> > to redefine 0 as something slightly different if for no other reason
> > than we in fs/proc/base.c. I know it seems a little trivial, but
> > since we're talking about values that will be used in the UAPI I think
> > we need to give it some thought and discussion. The only think I can
> > think of right now is to redefine 0 as "undefined", which isn't that
> > far removed from "invalid" and will not look too terrible in patch 3/8
> > - thoughts?
>
> I originally had LSM_ID_INVALID for 0, but there was an objection.
> It's not really invalid or undefined, it is reserved as not being an LSM id.
> How about LSM_ID_NALSMID or LSM_ID_NOTALSMID for 0? sort of like NAN for
> Not A Number.
>
> > With all that in mind, I would suggest something like this:
> >
> > /*
> > * ID tokens to identify Linux Security Modules (LSMs)
> > *
> > * These token values are used to uniquely identify specific LSMs
> > * in the kernel as well in the kernel's LSM userspace API.
> > *
> > * A value of zero/0 is considered undefined and should not be used
> > * outside of the kernel, values 1-99 are reserved for potential
> > * future use.
> > */
> > #define LSM_ID_UNDEF 0
>
> Fine, although I'd go with LSM_ID_NALSMID
Hmm, I had to think a little on that to figure out the NALSMID bit.
Of the two I would prefer LSM_ID_UNDEF as UNDEF tends to be a bit more
common in the kernel and would be more likely to get people thinking
in the right direction.
> >> +#define LSM_ID_CAPABILITY 100
> >> +#define LSM_ID_SELINUX 101
> >> +#define LSM_ID_SMACK 102
> >> +#define LSM_ID_TOMOYO 103
> >> +#define LSM_ID_IMA 104
> >> +#define LSM_ID_APPARMOR 105
> >> +#define LSM_ID_YAMA 106
> >> +#define LSM_ID_LOADPIN 107
> >> +#define LSM_ID_SAFESETID 108
> >> +#define LSM_ID_LOCKDOWN 109
> >> +#define LSM_ID_BPF 110
> >> +#define LSM_ID_LANDLOCK 111
> >> +
> >> +/*
> >> + * LSM_ATTR_XXX values identify the /proc/.../attr entry that the
> >> + * context represents. Not all security modules provide all of these
> >> + * values. Some security modules provide none of them.
> >> + */
> > I'd rather see text closer to this:
> >
> > /*
> > * LSM attributes
> > *
> > * The LSM_ATTR_XXX definitions identify different LSM
> > * attributes which are used in the kernel's LSM userspace API.
> > * Support for these attributes vary across the different LSMs,
> > * none are required.
> > */
>
> If you like that better I'm completely willing to adopt it.
Please.
> >> +#define LSM_ATTR_CURRENT 0x0001
> >> +#define LSM_ATTR_EXEC 0x0002
> >> +#define LSM_ATTR_FSCREATE 0x0004
> >> +#define LSM_ATTR_KEYCREATE 0x0008
> >> +#define LSM_ATTR_PREV 0x0010
> >> +#define LSM_ATTR_SOCKCREATE 0x0020
> >> +
> >> +#endif /* _UAPI_LINUX_LSM_H */
> >> diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
> >> index c6728a629437..63ea2a995987 100644
> >> --- a/security/apparmor/lsm.c
> >> +++ b/security/apparmor/lsm.c
> >> @@ -24,6 +24,7 @@
> >> #include <linux/zstd.h>
> >> #include <net/sock.h>
> >> #include <uapi/linux/mount.h>
> >> +#include <uapi/linux/lsm.h>
> >>
> >> #include "include/apparmor.h"
> >> #include "include/apparmorfs.h"
> >> @@ -1217,6 +1218,12 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
> >> .lbs_task = sizeof(struct aa_task_ctx),
> >> };
> >>
> >> +static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
> >> + .lsm = "apparmor",
> >> + .id = LSM_ID_APPARMOR,
> >> + .attrs_used = LSM_ATTR_CURRENT | LSM_ATTR_PREV | LSM_ATTR_EXEC,
> >> +};
> > Perhaps mark this as const in addition to ro_after_init? This applies
> > to all the other @lsm_id defs in this patch too.
>
> As I mentioned above, the lsm_id will eventually get changed during the
> registration process. I can add the const for now, knowing full well that
> it will be removed before long.
No, that's okay. When I was reviewing this I forgot that changes
would be required here for stacking.
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-12 1:37 ` Casey Schaufler
@ 2023-01-12 21:37 ` Paul Moore
0 siblings, 0 replies; 32+ messages in thread
From: Paul Moore @ 2023-01-12 21:37 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Wed, Jan 11, 2023 at 8:37 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> On 1/11/2023 1:07 PM, Paul Moore wrote:
> > On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> >> Create a system call lsm_get_self_attr() to provide the security
> >> module maintained attributes of the current process. Historically
> >> these attributes have been exposed to user space via entries in
> >> procfs under /proc/self/attr.
> >>
> >> Attributes are provided as a collection of lsm_ctx structures
> >> which are placed into a user supplied buffer. Each structure
> >> identifys the size of the attribute, and the attribute value.
> > ^^^
> > identifies
>
> Pluralses are hard in the vicinity of 'y's. ;)
>
> >> The format of the attribute value is defined by the security
> >> module, but will always be \0 terminated. The ctx_len value
> >> will always be strlen(ctx)+1.
> > I don't want to limit ourselves to only sending string values as
> > attributes as who knows what we might need to do in the future, and
> > the struct was originally designed to support both strings and binary
> > data. I would suggest changing the sentences above to something like
> > this:
>
> Part of creating a sane and sensible API is setting rational limitations.
> While a "context" has always allowed for a binary value it has always
> been a user friendly, nul terminated string. The one case where someone
> proposed otherwise was my "hideous" format for compound contexts, and we
> know how well that was received. If we're serious about cleaning up our
> API let's quit bending over to support something no one is using and that
> we'd prefer they didn't.
I agree that I'm in no rush to move away from a simple string format
for context values, but as we are at a unique point in time where we
get to define a new API I think it is important to ensure that it has
enough flexibility to endure whatever changes might come along in the
next 10~20 years. I mean ~20 years ago we only had one LSM and the
concept of containers/namespaces in the kernel was just a fringe
concept (if at all!).
I think it's also important to remember that we still review code
around here, and just because the struct has the necessary provisions
to *support* a binary context, it doesn't mean we are going to allow
it to be used that way without a lot of discussion first. Any move to
a binary format would have to be done in a way that doesn't break
existing applications which would likely mean either a secondary LSM
ID for those LSMs which provided a new format, a new LSM specific
flag, and in the most extreme case a LSM specific override tacked to
the end of the struct after the ctx field (possible since we now have
the total length field).
> That's my preference. Is there anyone who wants a binary interface, or any
> really good reason to provide one? I'm not going to stand fast on a strings
> only interface, but it would make it significantly cleaner if we had one.
It's not about needing or even wanting it right now, it's about
keeping it as a possible option for some point in the future when we
might need it.
> > The format of the attribute value is defined by the individual LSM,
> > with the attribute itself stored in @ctx and the length of the
> > attribute stored in @ctx_len. Both strings and arbitrary binary
> > attributes are supported, but strings should be NULL terminated and
> > @ctx_len should be equal to `strlen(@ctx) + 1`.
> >
> >> ---------------------------
> >> | __u32 id |
> >> ---------------------------
> >> | __u64 flags |
> >> ---------------------------
> >> | __kernel_size_t ctx_len |
> >> ---------------------------
> >> | __u8 ctx[ctx_len] |
> >> ---------------------------
> >> | __u32 id |
> >> ---------------------------
> >> | __u64 flags |
> >> ---------------------------
> >> | __kernel_size_t ctx_len |
> >> ---------------------------
> >> | __u8 ctx[ctx_len] |
> >> ---------------------------
> > Don't repeat the structure layout in memory twice here, it's
> > confusing. I also think it would be easier to read, and arguably more
> > useful, to simply copy the struct definition into the description
> > instead of the ASCII art column.
>
> OK on both.
>
> > Although, this has got me wondering if we should think about aligning
> > the lsm_ctx structs when we are populating them in the kernel; more on
> > this below ...
>
> As you say below, we'll need a total_len for this, but OK.
>
>
> >> ---
> >> Documentation/userspace-api/lsm.rst | 9 ++
> >> include/linux/syscalls.h | 3 +
> >> include/uapi/linux/lsm.h | 21 ++++
> >> kernel/sys_ni.c | 3 +
> >> security/Makefile | 1 +
> >> security/lsm_syscalls.c | 182 ++++++++++++++++++++++++++++
> >> 6 files changed, 219 insertions(+)
> >> create mode 100644 security/lsm_syscalls.c
> > ..
> >
> >> diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
> >> index 33a0ee3bcb2e..a89205c70ffa 100644
> >> --- a/include/linux/syscalls.h
> >> +++ b/include/linux/syscalls.h
> >> @@ -71,6 +71,7 @@ struct clone_args;
> >> struct open_how;
> >> struct mount_attr;
> >> struct landlock_ruleset_attr;
> >> +struct lsm_ctx;
> >> enum landlock_rule_type;
> >>
> >> #include <linux/types.h>
> >> @@ -1058,6 +1059,8 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
> >> asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
> >> unsigned long home_node,
> >> unsigned long flags);
> >> +asmlinkage long sys_lsm_get_self_attr(struct lsm_ctx *ctx, size_t *size,
> >> + int flags);
> >>
> >> /*
> >> * Architecture-specific system calls
> >> diff --git a/include/uapi/linux/lsm.h b/include/uapi/linux/lsm.h
> >> index 61a91b7d946f..8674d8c6b326 100644
> >> --- a/include/uapi/linux/lsm.h
> >> +++ b/include/uapi/linux/lsm.h
> >> @@ -9,6 +9,27 @@
> >> #ifndef _UAPI_LINUX_LSM_H
> >> #define _UAPI_LINUX_LSM_H
> >>
> >> +#include <linux/types.h>
> >> +#include <linux/unistd.h>
> >> +
> >> +/**
> >> + * struct lsm_ctx - LSM context
> >> + * @id: the LSM id number, see LSM_ID_XXX
> > As mentioned above, it occurred to me that we might want want to pad
> > out the lsm_ctx struct to ensure that the "array" of lsm_ctx is nicely
> > aligned. I know some systems used to complain about unaligned
> > accesses, and even on those that don't complain tend to be faster when
> > access are aligned. We can either implicitly align the individual
> > lsm_ctx structs or we can add a total length field (in addition to the
> > @ctx_len field) so that the padding/alignment is explicit.
> >
> > Adding an explicit total length field could have some other advantages
> > in that it, in conjunction with the existing @flags field, would allow
> > an individual LSM to "extend" the lsm_ctx struct to provide additional
> > LSM specific information in the case where the single @ctx field was
> > not sufficient. Think of it as some additional future proofing in
> > addition to explicit padding.
>
> I'm not sure whether to call it future proofing or confusion assurance,
> and I certainly wouldn't encourage such use. On the other hand, I wouldn't
> let that get in the way of the performant aligned interface, so I'm good
> with the len field in addition to the ctx_len.
Whatever you want to call it is fine by me. The more I think about
it, the more I think this will be important to have.
> >> + * @flags: context specifier and LSM specific flags
> > * @flags: LSM specific flags
> >
> > Only the individual LSM specified in @id should ever interpret @flags or @ctx.
>
> Sure.
>
> >> + * @ctx_len: the size of @ctx
> >> + * @ctx: the LSM context, a nul terminated string
> > * @ctx: the LSM context value
>
> As above, I would like to make this a string. I won't fight over it however.
>
> >> + * @ctx in a nul terminated string.
> >> + * (strlen(@ctx) < @ctx_len) is always true.
> >> + * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
> >> + */
> > Let's rework the extra description too based on the comments above.
> > For the sake of clarity, here is what I'm currently thinking (comments
> > and feedback are encouraged):
> >
> > /**
> > * struct lsm_ctx - LSM context information
> > * @id: the LSM ID token, see LSM_ID_XXX
> > * @flags: LSM specific flags
> > * @len: length of the lsm_ctx struct + extra (?) + padding
> > * @ctx_len: the size of @ctx
> > * @ctx: the LSM context value
> > *
> > * The @len field MUST be equal to size of the lsm_ctx struct
> > * plus any additional padding and/or data placed after @ctx.
> > *
> > * In all cases @ctx_len MUST be equal to length of @ctx. If
> > * @ctx is a string value, it should be nul terminated with
> > * @ctx_len equal to `strlen(@ctx) + 1`. Binary @ctx values
> > * are supported.
> > *
> > * The @flags and @ctx fields SHOULD only be interpreted by the
> > * LSM specified by @id; they MUST be set to zero/0 when not used.
> > */
> > struct lsm_ctx {
> > __u32 id;
> > __u64 flags;
> > __kernel_size_t len;
> > __kernel_size_t ctx_len;
> > __u8 ctx[];
> > };
>
> Yes, if there's a convincing argument for binary values.
>
> >> diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
> >> new file mode 100644
> >> index 000000000000..55e8bf61ac8a
> >> --- /dev/null
> >> +++ b/security/lsm_syscalls.c
> >> @@ -0,0 +1,182 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * System calls implementing the Linux Security Module API.
> >> + *
> >> + * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
> >> + * Copyright (C) 2022 Intel Corporation
> >> + */
> >> +
> >> +#include <asm/current.h>
> >> +#include <linux/compiler_types.h>
> >> +#include <linux/err.h>
> >> +#include <linux/errno.h>
> >> +#include <linux/security.h>
> >> +#include <linux/stddef.h>
> >> +#include <linux/syscalls.h>
> >> +#include <linux/types.h>
> >> +#include <linux/lsm_hooks.h>
> >> +#include <uapi/linux/lsm.h>
> >> +
> >> +struct attrs_used_map {
> >> + char *name;
> >> + int attrs_used;
> > Based on the usage below it really seems like @attrs_used should just
> > be @attr, yes? That said, I'm not too bothered by it either way so if
> > you really love @attrs_used that's fine.
>
> Potato - Potatoe - Seeing the same field name in different structs at
> the same time gives me a headache, but I'm not going to quibble.
>
>
> >> +};
> >> +
> >> +static const struct attrs_used_map lsm_attr_names[] = {
> > We can probably just call this "attr_map" right? I mean the "used"
> > portion is pretty inherent in the fact that we're defining a mapping
> > :)
>
> Sure.
>
>
> >> + { .name = "current", .attrs_used = LSM_ATTR_CURRENT, },
> >> + { .name = "exec", .attrs_used = LSM_ATTR_EXEC, },
> >> + { .name = "fscreate", .attrs_used = LSM_ATTR_FSCREATE, },
> >> + { .name = "keycreate", .attrs_used = LSM_ATTR_KEYCREATE, },
> >> + { .name = "prev", .attrs_used = LSM_ATTR_PREV, },
> >> + { .name = "sockcreate", .attrs_used = LSM_ATTR_SOCKCREATE, },
> >> +};
> >> +
> >> +static int attr_used_index(u32 flags)
> > Since you can only return one index value at a time in this function
> > you can't really support multiple attribute bits set in the @flags
> > parameter so why not change the prototype to better match the required
> > usage, example:
> >
> > static int attr_index(u32 attr)
> >
> >> +{
> >> + int i;
> >> +
> >> + if (flags == 0)
> >> + return -EINVAL;
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
> >> + if ((lsm_attr_names[i].attrs_used & flags) == flags)
> >> + return i;
> > Given the above, why not simplify the above test to this:
> >
> > if (lsm_attr_name[i].attr == attr)
> > return i;
>
> That won't work in the case where an LSM supports more than one attribute.
>
> >
> > If we don't care about failing fast in the case of being passed 0 (why
> > would we?) we can define this function as follows:
> >
> > static int attr_index(u32 attr)
> > {
> > int i;
> > for (i = 0; i < ARRAY_SIZE(lsm_attr_names); i++)
> > if (lsm_attr_names[i].attr == attr)
> > return i;
> > return -EINVAL;
> > }
> >
> > If we wanted to streamline things even further we could define
> > attr_map a bit differently and drop the loop in attr_index(). Yes, it
> > does waste attr_map[0], but I don't think anyone is going to be too
> > upset about one wasted index if it scales better.
> >
> > static const struct attr_map[] = {
> > [LSM_ATTR_CURRENT] = { .name = "current", .attr = LSM_ATTR_CURRENT },
> > [LSM_ATTR_EXEC] = { .name = "exec", .attr = LSM_ATTR_EXEC },
> > ...
> > };
> >
> > static int attr_index(u32 attr)
> > {
> > if (attr == 0 || attr >= ARRAY_SIZE(attr_map))
> > return -EINVAL;
> > return attr;
> > }
> >
> > If you did this you could probably also convert attr_map from a struct
> > to a simple array of strings as the attribute value would be the
> > associated index.
> >
> >> +/**
> >> + * sys_lsm_get_self_attr - Return current task's security module attributes
> >> + * @ctx: the LSM contexts
> >> + * @size: size of @ctx, updated on return
> >> + * @flags: which attribute to return
> >> + *
> >> + * Returns the calling task's LSM contexts. On success this
> >> + * function returns the number of @ctx array elements. This value
> >> + * may be zero if there are no LSM contexts assigned. If @size is
> >> + * insufficient to contain the return data -E2BIG is returned and
> >> + * @size is set to the minimum required size. In all other cases
> >> + * a negative value indicating the error is returned.
> >> + */
> >> +SYSCALL_DEFINE3(lsm_get_self_attr,
> >> + struct lsm_ctx __user *, ctx,
> >> + size_t __user *, size,
> >> + u32, flags)
> >> +{
> >> + int i;
> >> + int rc = 0;
> >> + int len;
> >> + int attr;
> >> + int count = 0;
> >> + void *curr;
> >> + char *cp;
> >> + char *np;
> >> + char **interum_ctx;
> >> + size_t total_size = 0;
> >> + struct lsm_ctx *ip;
> >> + struct lsm_ctx *interum;
> >> + struct lsm_ctx *final = NULL;
> >> +
> >> + attr = attr_used_index(flags);
> >> + if (attr < 0)
> >> + return attr;
> >> +
> >> + interum = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
> >> + sizeof(*interum), GFP_KERNEL);
> >> + if (interum == NULL)
> >> + return -ENOMEM;
> >> + ip = interum;
> >> +
> >> + interum_ctx = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
> >> + sizeof(*interum_ctx), GFP_KERNEL);
> >> + if (interum_ctx == NULL) {
> >> + kfree(interum);
> >> + return -ENOMEM;
> >> + }
> >> +
> >> + for (i = 0; i < lsm_active_cnt; i++) {
> >> + if ((lsm_idlist[i]->attrs_used &
> >> + lsm_attr_names[attr].attrs_used) == 0)
> >> + continue;
> >> +
> >> + len = security_getprocattr(current, lsm_idlist[i]->id,
> >> + lsm_attr_names[attr].name,
> >> + &cp);
> >> + if (len <= 0)
> >> + continue;
> >> +
> >> + ip->id = lsm_idlist[i]->id;
> >> + ip->flags = lsm_attr_names[attr].attrs_used;
> >> + interum_ctx[count] = cp;
> >> +
> >> + /*
> >> + * A security module that returns a binary attribute
> >> + * will need to identify itself to prevent string
> >> + * processing.
> >> + *
> >> + * At least one security module adds a \n at the
> >> + * end of a context to make it look nicer. Change
> >> + * that to a \0 so that user space doesn't have to
> >> + * work around it.
> >> + *
> >> + * Security modules have been inconsistent about
> >> + * including the \0 terminator in the size. If it's
> >> + * not there make space for it.
> >> + *
> >> + * The length returned will reflect the length of
> >> + * the string provided by the security module, which
> >> + * may not match what getprocattr returned.
> >> + */
> >> + np = strnchr(cp, len, '\n');
> >> + if (np != NULL)
> >> + *np = '\0';
> >> + ip->ctx_len = strnlen(cp, len) + 1;
> >> + total_size += sizeof(*interum) + ip->ctx_len;
> >> + ip++;
> >> + count++;
> >> + }
> >> +
> >> + if (count == 0)
> >> + goto free_out;
> >> +
> >> + final = kzalloc(total_size, GFP_KERNEL);
> >> + if (final == NULL) {
> >> + rc = -ENOMEM;
> >> + goto free_out;
> >> + }
> >> +
> >> + curr = final;
> >> + ip = interum;
> >> + for (i = 0; i < count; i++) {
> >> + memcpy(curr, ip, sizeof(*interum));
> >> + curr += sizeof(*interum);
> >> + if (ip->ctx_len > 1)
> >> + memcpy(curr, interum_ctx[i], ip->ctx_len - 1);
> >> + curr += ip->ctx_len;
> >> + ip++;
> >> + }
> >> +
> >> + if (get_user(len, size)) {
> >> + rc = -EFAULT;
> >> + goto free_out;
> >> + }
> >> + if (total_size > len) {
> >> + rc = -ERANGE;
> >> + if (put_user(total_size, size) != 0)
> >> + rc = -EFAULT;
> >> + goto free_out;
> >> + }
> >> + if (copy_to_user(ctx, final, total_size) != 0 ||
> >> + put_user(total_size, size) != 0)
> >> + rc = -EFAULT;
> >> + else
> >> + rc = count;
> >> +
> >> +free_out:
> >> + for (i = 0; i < count; i++)
> >> + kfree(interum_ctx[i]);
> >> + kfree(interum_ctx);
> >> + kfree(interum);
> >> + kfree(final);
> >> + return rc;
> >> +}
> > Hmm. That's all kinda painful isn't it?
>
> It's not so bad as all that. Well, maybe.
>
> > I think trying to reuse
> > security_getprocattr() is doing more harm than good with all the
> > awkward handling necessary to ensure consistent output. While it's
> > nice to be able to reuse existing interfaces, one of the main
> > motivations behind the LSM syscall effort is to create a cleaner
> > interface that was designed from the beginning to support multiple
> > LSMs and provide a level of extensibility that we do not currently
> > have with the procfs interface. Hacking together all our old crap to
> > make this happen seems very wrong to me.
> >
> > With that in mind I would like to propose we introduce a new LSM hook
> > to populate a lsm_ctx struct based on a LSM_ATTR_XXX value:
> >
> > int security_sys_getselfattr(u64 attr, struct lsm_ctx __user *ctx,
> > size_t *len);
> >
> > The individual LSMs would be responsible for fully populating their
> > lsm_ctx struct specified by @ctx (note the __user tagging) and would
> > return 0 on success or negative values on failure. The maximum size
> > of the @ctx buffer would be passed in via @len and the used size would
> > be returned in @len; in the case of an too-small @ctx, -E2BIG would be
> > returned and the necessary size would be returned in @len (just as
> > discussed for the syscall itself). This way the LSM layer syscall
> > function would not need to worry about properly terminating the
> > lsm_ctx::ctx field, setting any LSM specific flags, etc. Passing the
> > __user pointer directly not only greatly simplifies the LSM layer, it
> > also has the potential to reduce the number of allocations/copies.
>
> That's going to be a lot of duplicate code to add to each LSM. Yes,
> we can do that, but I don't see it as any cleaner.
It puts the individual LSMs in charge of setting their own lsm_ctx
struct which I think will be increasingly important as time goes on
and things evolve. I'd rather make sure the infrastructure is doing
the right thing now so we can avoid having to have this exact same
discussion each time an individual LSM wants to do something a little
different with their lsm_ctx struct :)
If you need something more concrete and immediate to justify this
work, think about how a LSM could set a bit in the lsm_ctx::flags
field using the current approach of reusing the procfs hook.
> > Taking this approach should shrink the LSM layer syscall function to
> > simply needing to validate the passed @flags before looping through
> > the LSMs calling security_sys_getselfattr(). The lsm_ctx pointer
> > would need to be incremented appropriately for each call, and a total
> > length/size count would need to be maintained in case the buffer is
> > too small, but those should be relatively minor things.
>
> I think this pushed the complexity downward. If we only had one LSM
> it would be a wash. With each LSM having to provide this we're multiplying
> the complexity rather than reducing it.
>
> But again, I'll listen to reason.
I think we are all better off if the LSM layer is as thin as possible.
I believe we've seen the number of LSMs grow and the variety of
security models expand largely in part of this approach; while a thin
LSM layer may force the LSMs to do some extra work, it allows varied
approaches that might not be possible if the LSM layer enforced more
of a specific world-view.
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-12 14:40 ` Arnd Bergmann
@ 2023-01-12 21:39 ` Paul Moore
2023-02-14 16:48 ` Mickaël Salaün
0 siblings, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-01-12 21:39 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Casey Schaufler, casey.schaufler, linux-security-module, jmorris,
Kees Cook, john.johansen, Tetsuo Handa, stephen.smalley.work,
linux-kernel, linux-api, mic
On Thu, Jan 12, 2023 at 9:40 AM Arnd Bergmann <arnd@arndb.de> wrote:
> On Mon, Jan 9, 2023, at 19:07, Casey Schaufler wrote:
> > +/**
> > + * struct lsm_ctx - LSM context
> > + * @id: the LSM id number, see LSM_ID_XXX
> > + * @flags: context specifier and LSM specific flags
> > + * @ctx_len: the size of @ctx
> > + * @ctx: the LSM context, a nul terminated string
> > + *
> > + * @ctx in a nul terminated string.
> > + * (strlen(@ctx) < @ctx_len) is always true.
> > + * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
> > + */
> > +struct lsm_ctx {
> > + __u32 id;
> > + __u64 flags;
> > + __kernel_size_t ctx_len;
> > + __u8 ctx[];
> > +};
>
> I think this should be changed to be the same layout on
> all architectures regardless of __u64 alignment and
> sizeof(__kernel_size_t) differences, to avoid the need
> for compat syscalls and explicit clearing of the
> internal padding.
>
> Maybe just use __u64 fields for all three integers?
I have no problem with that ... the ctx[] field is variable length
anyway so keeping it as a __u8 should be fine.
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 5/8] LSM: Create lsm_module_list system call
2023-01-12 1:39 ` Casey Schaufler
@ 2023-01-12 21:43 ` Paul Moore
0 siblings, 0 replies; 32+ messages in thread
From: Paul Moore @ 2023-01-12 21:43 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Wed, Jan 11, 2023 at 8:39 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> On 1/11/2023 1:07 PM, Paul Moore wrote:
> > On Mon, Jan 9, 2023 at 1:09 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> >> Create a system call to report the list of Linux Security Modules
> >> that are active on the system. The list is provided as an array
> >> of LSM ID numbers.
> >>
> >> The calling application can use this list determine what LSM
> >> specific actions it might take. That might include chosing an
> >> output format, determining required privilege or bypassing
> >> security module specific behavior.
> >>
> >> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> >> ---
> >> Documentation/userspace-api/lsm.rst | 3 +++
> >> include/linux/syscalls.h | 1 +
> >> kernel/sys_ni.c | 1 +
> >> security/lsm_syscalls.c | 41 +++++++++++++++++++++++++++++
> >> 4 files changed, 46 insertions(+)
> > ..
> >
> >> diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c
> >> index 55e8bf61ac8a..92af1fcaa654 100644
> >> --- a/security/lsm_syscalls.c
> >> +++ b/security/lsm_syscalls.c
> >> @@ -180,3 +180,44 @@ SYSCALL_DEFINE3(lsm_get_self_attr,
> >> kfree(final);
> >> return rc;
> >> }
> >> +
> >> +/**
> >> + * sys_lsm_module_list - Return a list of the active security modules
> >> + * @ids: the LSM module ids
> >> + * @size: size of @ids, updated on return
> >> + * @flags: reserved for future use, must be zero
> >> + *
> >> + * Returns a list of the active LSM ids. On success this function
> >> + * returns the number of @ids array elements. This value may be zero
> >> + * if there are no LSMs active. If @size is insufficient to contain
> >> + * the return data -E2BIG is returned and @size is set to the minimum
> >> + * required size. In all other cases a negative value indicating the
> >> + * error is returned.
> >> + */
> >> +SYSCALL_DEFINE3(lsm_module_list,
> >> + u32 __user *, ids,
> >> + size_t __user *, size,
> >> + u64, flags)
> >> +{
> >> + size_t total_size = lsm_active_cnt * sizeof(*ids);
> >> + size_t usize;
> >> + int i;
> >> +
> >> + if (flags)
> >> + return -EINVAL;
> >> +
> >> + if (get_user(usize, size))
> >> + return -EFAULT;
> >> +
> >> + if (put_user(total_size, size) != 0)
> >> + return -EFAULT;
> >> +
> >> + if (usize < total_size)
> >> + return -E2BIG;
> >> +
> >> + for (i = 0; i < lsm_active_cnt; i++)
> >> + if (put_user(lsm_idlist[i]->id, ids++))
> >> + return -EFAULT;
> >> +
> >> + return lsm_active_cnt;
> >> +}
> > Similar to my comments in 4/8, I would probably create a new LSM hook
> > for this syscall so that the lsm_ctx is passed through the LSM layer
> > directly to the target LSM:
> >
> > int security_sys_setselfattr(u64 attr, struct lsm_ctx __user *ctx,
> > size_t len);
>
> That seems like a whole lot of work when you can just look it up
> in an existing table.
D'oh! Sorry, this comment was intended for patch 6/8, the
lsm_set_self_attr() syscall patch. I agree, it would be very silly to
have a dedicated hook for lsm_module_list() :)
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 7/8] LSM: wireup Linux Security Module syscalls
2023-01-09 18:07 ` [PATCH v5 7/8] LSM: wireup Linux Security Module syscalls Casey Schaufler
@ 2023-01-13 9:31 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 9:31 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, paul, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Mon, Jan 9, 2023 at 7:15 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> Wireup lsm_get_self_attr, lsm_set_self_attr and lsm_module_list
> system calls.
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> Cc: linux-api@vger.kernel.org
> arch/m68k/kernel/syscalls/syscall.tbl | 3 +++
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
2023-01-11 21:07 ` Paul Moore
2023-01-12 14:40 ` Arnd Bergmann
@ 2023-02-02 4:53 ` Serge Hallyn (shallyn)
2023-02-14 17:41 ` Mickaël Salaün
3 siblings, 0 replies; 32+ messages in thread
From: Serge Hallyn (shallyn) @ 2023-02-02 4:53 UTC (permalink / raw)
To: Casey Schaufler
Cc: casey.schaufler, paul, linux-security-module, jmorris, keescook,
john.johansen, penguin-kernel, stephen.smalley.work,
linux-kernel, linux-api, mic
On Mon, Jan 09, 2023 at 10:07:13AM -0800, Casey Schaufler wrote:
> +/**
> + * sys_lsm_get_self_attr - Return current task's security module attributes
> + * @ctx: the LSM contexts
> + * @size: size of @ctx, updated on return
> + * @flags: which attribute to return
> + *
> + * Returns the calling task's LSM contexts. On success this
> + * function returns the number of @ctx array elements. This value
> + * may be zero if there are no LSM contexts assigned. If @size is
> + * insufficient to contain the return data -E2BIG is returned and
Technicality: You say -E2BIG, which is -7, but in fact belog you return
-ERANGE, which is -34.
> + * @size is set to the minimum required size. In all other cases
> + * a negative value indicating the error is returned.
> + */
> +SYSCALL_DEFINE3(lsm_get_self_attr,
> + struct lsm_ctx __user *, ctx,
> + size_t __user *, size,
> + u32, flags)
> +{
> + int i;
> + int rc = 0;
> + int len;
> + int attr;
> + int count = 0;
> + void *curr;
> + char *cp;
> + char *np;
> + char **interum_ctx;
> + size_t total_size = 0;
> + struct lsm_ctx *ip;
> + struct lsm_ctx *interum;
> + struct lsm_ctx *final = NULL;
> +
> + attr = attr_used_index(flags);
> + if (attr < 0)
> + return attr;
> +
> + interum = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
> + sizeof(*interum), GFP_KERNEL);
> + if (interum == NULL)
> + return -ENOMEM;
> + ip = interum;
> +
> + interum_ctx = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_active_cnt *
> + sizeof(*interum_ctx), GFP_KERNEL);
> + if (interum_ctx == NULL) {
> + kfree(interum);
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < lsm_active_cnt; i++) {
> + if ((lsm_idlist[i]->attrs_used &
> + lsm_attr_names[attr].attrs_used) == 0)
> + continue;
> +
> + len = security_getprocattr(current, lsm_idlist[i]->id,
> + lsm_attr_names[attr].name,
> + &cp);
> + if (len <= 0)
> + continue;
> +
> + ip->id = lsm_idlist[i]->id;
> + ip->flags = lsm_attr_names[attr].attrs_used;
> + interum_ctx[count] = cp;
> +
> + /*
> + * A security module that returns a binary attribute
> + * will need to identify itself to prevent string
> + * processing.
> + *
> + * At least one security module adds a \n at the
> + * end of a context to make it look nicer. Change
> + * that to a \0 so that user space doesn't have to
> + * work around it.
> + *
> + * Security modules have been inconsistent about
> + * including the \0 terminator in the size. If it's
> + * not there make space for it.
> + *
> + * The length returned will reflect the length of
> + * the string provided by the security module, which
> + * may not match what getprocattr returned.
> + */
> + np = strnchr(cp, len, '\n');
> + if (np != NULL)
> + *np = '\0';
> + ip->ctx_len = strnlen(cp, len) + 1;
> + total_size += sizeof(*interum) + ip->ctx_len;
> + ip++;
> + count++;
> + }
> +
> + if (count == 0)
> + goto free_out;
> +
> + final = kzalloc(total_size, GFP_KERNEL);
> + if (final == NULL) {
> + rc = -ENOMEM;
> + goto free_out;
> + }
> +
> + curr = final;
> + ip = interum;
> + for (i = 0; i < count; i++) {
> + memcpy(curr, ip, sizeof(*interum));
> + curr += sizeof(*interum);
> + if (ip->ctx_len > 1)
> + memcpy(curr, interum_ctx[i], ip->ctx_len - 1);
> + curr += ip->ctx_len;
> + ip++;
> + }
> +
> + if (get_user(len, size)) {
> + rc = -EFAULT;
> + goto free_out;
> + }
> + if (total_size > len) {
> + rc = -ERANGE;
> + if (put_user(total_size, size) != 0)
> + rc = -EFAULT;
> + goto free_out;
> + }
> + if (copy_to_user(ctx, final, total_size) != 0 ||
> + put_user(total_size, size) != 0)
> + rc = -EFAULT;
> + else
> + rc = count;
> +
> +free_out:
> + for (i = 0; i < count; i++)
> + kfree(interum_ctx[i]);
> + kfree(interum_ctx);
> + kfree(interum);
> + kfree(final);
> + return rc;
> +}
> --
> 2.39.0
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-12 21:39 ` Paul Moore
@ 2023-02-14 16:48 ` Mickaël Salaün
0 siblings, 0 replies; 32+ messages in thread
From: Mickaël Salaün @ 2023-02-14 16:48 UTC (permalink / raw)
To: Paul Moore, Arnd Bergmann
Cc: Casey Schaufler, casey.schaufler, linux-security-module, jmorris,
Kees Cook, john.johansen, Tetsuo Handa, stephen.smalley.work,
linux-kernel, linux-api
On 12/01/2023 22:39, Paul Moore wrote:
> On Thu, Jan 12, 2023 at 9:40 AM Arnd Bergmann <arnd@arndb.de> wrote:
>> On Mon, Jan 9, 2023, at 19:07, Casey Schaufler wrote:
>>> +/**
>>> + * struct lsm_ctx - LSM context
>>> + * @id: the LSM id number, see LSM_ID_XXX
>>> + * @flags: context specifier and LSM specific flags
>>> + * @ctx_len: the size of @ctx
>>> + * @ctx: the LSM context, a nul terminated string
>>> + *
>>> + * @ctx in a nul terminated string.
>>> + * (strlen(@ctx) < @ctx_len) is always true.
>>> + * (strlen(@ctx) == @ctx_len + 1) is not guaranteed.
>>> + */
>>> +struct lsm_ctx {
>>> + __u32 id;
There is a hole here for 64-bit architectures.
>>> + __u64 flags;
>>> + __kernel_size_t ctx_len;
This is an architecture-related size, which makes the struct size
different according to architectures. We should avoid that.
>>> + __u8 ctx[];
>>> +};
I suggest packing this struct.
>>
>> I think this should be changed to be the same layout on
>> all architectures regardless of __u64 alignment and
>> sizeof(__kernel_size_t) differences, to avoid the need
>> for compat syscalls and explicit clearing of the
>> internal padding.
>>
>> Maybe just use __u64 fields for all three integers?
>
> I have no problem with that ... the ctx[] field is variable length
> anyway so keeping it as a __u8 should be fine.
>
For Landlock, we make sure the UAPI structs don't contain holes, are
packed, and have the same size for all architectures. We can check that
with pahole but for strong guarantee I suggest the same build check as
for Landlock's build_check_abi():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/landlock/syscalls.c#n68
We don't need to use 64-bit fields everywhere.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
` (2 preceding siblings ...)
2023-02-02 4:53 ` Serge Hallyn (shallyn)
@ 2023-02-14 17:41 ` Mickaël Salaün
2023-02-14 18:06 ` Casey Schaufler
3 siblings, 1 reply; 32+ messages in thread
From: Mickaël Salaün @ 2023-02-14 17:41 UTC (permalink / raw)
To: Casey Schaufler, casey.schaufler, paul, linux-security-module
Cc: jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api
On 09/01/2023 19:07, Casey Schaufler wrote:
> Create a system call lsm_get_self_attr() to provide the security
> module maintained attributes of the current process. Historically
> these attributes have been exposed to user space via entries in
> procfs under /proc/self/attr.
>
> Attributes are provided as a collection of lsm_ctx structures
> which are placed into a user supplied buffer. Each structure
> identifys the size of the attribute, and the attribute value.
> The format of the attribute value is defined by the security
> module, but will always be \0 terminated. The ctx_len value
> will always be strlen(ctx)+1.
>
> ---------------------------
> | __u32 id |
> ---------------------------
> | __u64 flags |
> ---------------------------
> | __kernel_size_t ctx_len |
> ---------------------------
> | __u8 ctx[ctx_len] |
> ---------------------------
> | __u32 id |
> ---------------------------
> | __u64 flags |
> ---------------------------
> | __kernel_size_t ctx_len |
> ---------------------------
> | __u8 ctx[ctx_len] |
> ---------------------------
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
> ---
> Documentation/userspace-api/lsm.rst | 9 ++
> include/linux/syscalls.h | 3 +
> include/uapi/linux/lsm.h | 21 ++++
> kernel/sys_ni.c | 3 +
> security/Makefile | 1 +
> security/lsm_syscalls.c | 182 ++++++++++++++++++++++++++++
> 6 files changed, 219 insertions(+)
> create mode 100644 security/lsm_syscalls.c
For new files (e.g. lsm_syscalls.c), it would be nice to auto-format
them with clang-format. It helps maintenance by keeping a consistent
style across commits, which should also help backports, and it avoids
nitpicking on style issues.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes
2023-02-14 17:41 ` Mickaël Salaün
@ 2023-02-14 18:06 ` Casey Schaufler
0 siblings, 0 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-02-14 18:06 UTC (permalink / raw)
To: Mickaël Salaün, casey.schaufler, paul, linux-security-module
Cc: jmorris, keescook, john.johansen, penguin-kernel,
stephen.smalley.work, linux-kernel, linux-api, casey
On 2/14/2023 9:41 AM, Mickaël Salaün wrote:
>
> On 09/01/2023 19:07, Casey Schaufler wrote:
>> Create a system call lsm_get_self_attr() to provide the security
>> module maintained attributes of the current process. Historically
>> these attributes have been exposed to user space via entries in
>> procfs under /proc/self/attr.
>>
>> Attributes are provided as a collection of lsm_ctx structures
>> which are placed into a user supplied buffer. Each structure
>> identifys the size of the attribute, and the attribute value.
>> The format of the attribute value is defined by the security
>> module, but will always be \0 terminated. The ctx_len value
>> will always be strlen(ctx)+1.
>>
>> ---------------------------
>> | __u32 id |
>> ---------------------------
>> | __u64 flags |
>> ---------------------------
>> | __kernel_size_t ctx_len |
>> ---------------------------
>> | __u8 ctx[ctx_len] |
>> ---------------------------
>> | __u32 id |
>> ---------------------------
>> | __u64 flags |
>> ---------------------------
>> | __kernel_size_t ctx_len |
>> ---------------------------
>> | __u8 ctx[ctx_len] |
>> ---------------------------
>>
>> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
>> ---
>> Documentation/userspace-api/lsm.rst | 9 ++
>> include/linux/syscalls.h | 3 +
>> include/uapi/linux/lsm.h | 21 ++++
>> kernel/sys_ni.c | 3 +
>> security/Makefile | 1 +
>> security/lsm_syscalls.c | 182 ++++++++++++++++++++++++++++
>> 6 files changed, 219 insertions(+)
>> create mode 100644 security/lsm_syscalls.c
>
> For new files (e.g. lsm_syscalls.c), it would be nice to auto-format
> them with clang-format. It helps maintenance by keeping a consistent
> style across commits, which should also help backports, and it avoids
> nitpicking on style issues.
Good idea.
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2023-02-14 18:06 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20230109180717.58855-1-casey.ref@schaufler-ca.com>
2023-01-09 18:07 ` [PATCH v5 0/8] LSM: Three basic syscalls Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 1/8] LSM: Identify modules by more than name Casey Schaufler
2023-01-11 21:00 ` Paul Moore
2023-01-12 0:05 ` Casey Schaufler
2023-01-12 20:30 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 2/8] LSM: Maintain a table of LSM attribute data Casey Schaufler
2023-01-11 1:58 ` kernel test robot
2023-01-11 21:01 ` Paul Moore
2023-01-12 0:36 ` Casey Schaufler
2023-01-12 20:26 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 3/8] proc: Use lsmids instead of lsm names for attrs Casey Schaufler
2023-01-11 21:01 ` Paul Moore
2023-01-12 0:37 ` Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 4/8] LSM: lsm_get_self_attr syscall for LSM self attributes Casey Schaufler
2023-01-11 21:07 ` Paul Moore
2023-01-12 1:37 ` Casey Schaufler
2023-01-12 21:37 ` Paul Moore
2023-01-12 14:40 ` Arnd Bergmann
2023-01-12 21:39 ` Paul Moore
2023-02-14 16:48 ` Mickaël Salaün
2023-02-02 4:53 ` Serge Hallyn (shallyn)
2023-02-14 17:41 ` Mickaël Salaün
2023-02-14 18:06 ` Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 5/8] LSM: Create lsm_module_list system call Casey Schaufler
2023-01-11 0:50 ` kernel test robot
2023-01-11 21:07 ` Paul Moore
2023-01-12 1:39 ` Casey Schaufler
2023-01-12 21:43 ` Paul Moore
2023-01-09 18:07 ` [PATCH v5 6/8] LSM: lsm_set_self_attr syscall for LSM self attributes Casey Schaufler
2023-01-09 18:07 ` [PATCH v5 7/8] LSM: wireup Linux Security Module syscalls Casey Schaufler
2023-01-13 9:31 ` Geert Uytterhoeven
2023-01-09 18:07 ` [PATCH v5 8/8] LSM: selftests for " Casey Schaufler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).