[PATCH 0/3] arm64: dts: meson: add WiFi to P212 and cleanup VIM1

[PATCH 0/3] arm64: dts: meson: add WiFi to P212 and cleanup VIM1

[Christian Hewitt]

This small series adds WiFi support to the P212 dtsi then removes the
corresponding node from the VIM1 dts (as it's now inherited). Also
move the pwm_ef node in the dtsi to alpha-sort correctly.

Christian Hewitt (3):
  arm64: dts: meson: add Broadcom WiFi to P212 dtsi
  arm64: dts: meson: move pwm_ef node in P212 dtsi
  arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1

 .../amlogic/meson-gxl-s905x-khadas-vim.dts    | 15 -------------
 .../dts/amlogic/meson-gxl-s905x-p212.dtsi     | 21 ++++++++++++-------
 2 files changed, 13 insertions(+), 23 deletions(-)

-- 
2.34.1

[PATCH 1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi

[Christian Hewitt]

The P212 has a combined WiFi/BT module. The BT side is already enabled
in the dtsi but the WiFi side is not. Let's enable the WiFi module.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 05cb2f5e5c36..7055057d7942 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -125,6 +125,11 @@ &sd_emmc_a {
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
 
 /* SD card */
-- 
2.34.1

Re: [PATCH 1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi

[Neil Armstrong]

On 23/01/2023 07:55, Christian Hewitt wrote:
> The P212 has a combined WiFi/BT module. The BT side is already enabled
> in the dtsi but the WiFi side is not. Let's enable the WiFi module.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> index 05cb2f5e5c36..7055057d7942 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -125,6 +125,11 @@ &sd_emmc_a {
>   
>   	vmmc-supply = <&vddao_3v3>;
>   	vqmmc-supply = <&vddio_boot>;
> +
> +	brcmf: wifi@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
>   };
>   
>   /* SD card */

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

[PATCH 2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi

[Christian Hewitt]

Cosmetic-only change to alpha-sort the pwm_ef node.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi   | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 7055057d7942..a150cc0e18ff 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -97,6 +97,14 @@ &ir {
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vddio_ao18>;
@@ -170,14 +178,6 @@ &sd_emmc_c {
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
 /* This is connected to the Bluetooth module: */
 &uart_A {
 	status = "okay";
-- 
2.34.1

Re: [PATCH 2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi

[Neil Armstrong]

On 23/01/2023 07:55, Christian Hewitt wrote:
> Cosmetic-only change to alpha-sort the pwm_ef node.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>   .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi   | 16 ++++++++--------
>   1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> index 7055057d7942..a150cc0e18ff 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -97,6 +97,14 @@ &ir {
>   	pinctrl-names = "default";
>   };
>   
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&clkc CLKID_FCLK_DIV4>;
> +	clock-names = "clkin0";
> +};
> +
>   &saradc {
>   	status = "okay";
>   	vref-supply = <&vddio_ao18>;
> @@ -170,14 +178,6 @@ &sd_emmc_c {
>   	vqmmc-supply = <&vddio_boot>;
>   };
>   
> -&pwm_ef {
> -	status = "okay";
> -	pinctrl-0 = <&pwm_e_pins>;
> -	pinctrl-names = "default";
> -	clocks = <&clkc CLKID_FCLK_DIV4>;
> -	clock-names = "clkin0";
> -};
> -
>   /* This is connected to the Bluetooth module: */
>   &uart_A {
>   	status = "okay";

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

[PATCH 3/3] arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1

[Christian Hewitt]

The Broadcom WiFi/BT SDIO nodes are now inherited from the P212 common dtsi
so we can remove them from the VIM1 board dts.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts    | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index bee51e29015b..2f88f78de5b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -220,21 +220,6 @@ &pwm_ef {
 
 &sd_emmc_a {
 	max-frequency = <100000000>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&uart_A {
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
 };
 
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-- 
2.34.1

Re: [PATCH 3/3] arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1

[Neil Armstrong]

On 23/01/2023 07:55, Christian Hewitt wrote:
> The Broadcom WiFi/BT SDIO nodes are now inherited from the P212 common dtsi
> so we can remove them from the VIM1 board dts.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>   .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts    | 15 ---------------
>   1 file changed, 15 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> index bee51e29015b..2f88f78de5b7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> @@ -220,21 +220,6 @@ &pwm_ef {
>   
>   &sd_emmc_a {
>   	max-frequency = <100000000>;
> -
> -	brcmf: wifi@1 {
> -		reg = <1>;
> -		compatible = "brcm,bcm4329-fmac";
> -	};
> -};
> -
> -&uart_A {
> -	bluetooth {
> -		compatible = "brcm,bcm43438-bt";
> -		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> -		max-speed = <2000000>;
> -		clocks = <&wifi32k>;
> -		clock-names = "lpo";
> -	};
>   };
>   
>   /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH 0/3] arm64: dts: meson: add WiFi to P212 and cleanup VIM1

[Neil Armstrong]

Hi,

On Mon, 23 Jan 2023 06:55:01 +0000, Christian Hewitt wrote:
> This small series adds WiFi support to the P212 dtsi then removes the
> corresponding node from the VIM1 dts (as it's now inherited). Also
> move the pwm_ef node in the dtsi to alpha-sort correctly.
> 
> Christian Hewitt (3):
>   arm64: dts: meson: add Broadcom WiFi to P212 dtsi
>   arm64: dts: meson: move pwm_ef node in P212 dtsi
>   arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.3/arm64-dt)

[1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi
      https://git.kernel.org/amlogic/c/ac714d0925b4fae6a2a8c03da743a91d559f2b5c
[2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi
      https://git.kernel.org/amlogic/c/81351d2f0b006302a72310c95203a767cf68631e
[3/3] arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
      https://git.kernel.org/amlogic/c/3384645fb6cf31542650b89ecabe1fb04d0662fd

These changes has been applied on the intermediate git tree [1].

The v6.3/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil