linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Liu Ying <victor.liu@nxp.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: marex@denx.de, stefan@agner.ch, airlied@gmail.com,
	daniel@ffwll.ch, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com,
	krzysztof.kozlowski@linaro.org, LW@KARO-electronics.de,
	alexander.stein@ew.tq-group.com
Subject: [PATCH v2 5/6] drm: lcdif: Add multiple encoders and first bridges support
Date: Wed, 25 Jan 2023 14:40:29 +0800	[thread overview]
Message-ID: <20230125064030.1222121-6-victor.liu@nxp.com> (raw)
In-Reply-To: <20230125064030.1222121-1-victor.liu@nxp.com>

The single LCDIF embedded in i.MX93 SoC may drive multiple displays
simultaneously.  Look at LCDIF output port's remote port parents to
find all enabled first bridges.  Add an encoder for each found bridge
and attach the bridge to the encoder.  This is a preparation for
adding i.MX93 LCDIF support.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v1->v2:
* Split from patch 2/2 in v1. (Marek, Alexander)
* Drop '!remote ||' from lcdif_attach_bridge(). (Lothar)
* Drop unneeded 'bridges' member from lcdif_drm_private structure.

 drivers/gpu/drm/mxsfb/lcdif_drv.c | 68 +++++++++++++++++++++++++++----
 drivers/gpu/drm/mxsfb/lcdif_drv.h |  4 +-
 drivers/gpu/drm/mxsfb/lcdif_kms.c | 21 ++--------
 3 files changed, 66 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c b/drivers/gpu/drm/mxsfb/lcdif_drv.c
index b5b9a8e273c6..eb6c265fa2fe 100644
--- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
+++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
@@ -9,13 +9,16 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_drv.h>
+#include <drm/drm_encoder.h>
 #include <drm/drm_fbdev_generic.h>
 #include <drm/drm_gem_dma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
@@ -38,19 +41,68 @@ static const struct drm_mode_config_helper_funcs lcdif_mode_config_helpers = {
 	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
 };
 
+static const struct drm_encoder_funcs lcdif_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
 static int lcdif_attach_bridge(struct lcdif_drm_private *lcdif)
 {
-	struct drm_device *drm = lcdif->drm;
+	struct device *dev = lcdif->drm->dev;
+	struct device_node *ep;
 	struct drm_bridge *bridge;
 	int ret;
 
-	bridge = devm_drm_of_get_bridge(drm->dev, drm->dev->of_node, 0, 0);
-	if (IS_ERR(bridge))
-		return PTR_ERR(bridge);
-
-	ret = drm_bridge_attach(&lcdif->encoder, bridge, NULL, 0);
-	if (ret)
-		return dev_err_probe(drm->dev, ret, "Failed to attach bridge\n");
+	for_each_endpoint_of_node(dev->of_node, ep) {
+		struct device_node *remote;
+		struct of_endpoint of_ep;
+		struct drm_encoder *encoder;
+
+		remote = of_graph_get_remote_port_parent(ep);
+		if (!of_device_is_available(remote)) {
+			of_node_put(remote);
+			continue;
+		}
+		of_node_put(remote);
+
+		ret = of_graph_parse_endpoint(ep, &of_ep);
+		if (ret < 0) {
+			dev_err(dev, "Failed to parse endpoint %pOF\n", ep);
+			of_node_put(ep);
+			return ret;
+		}
+
+		if (of_ep.id >= MAX_DISPLAYS) {
+			dev_warn(dev, "invalid endpoint id %u\n", of_ep.id);
+			continue;
+		}
+
+		bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, of_ep.id);
+		if (IS_ERR(bridge)) {
+			of_node_put(ep);
+			return dev_err_probe(dev, PTR_ERR(bridge),
+					     "Failed to get bridge for endpoint%u\n",
+					     of_ep.id);
+		}
+
+		encoder = &lcdif->encoders[of_ep.id];
+		encoder->possible_crtcs = drm_crtc_mask(&lcdif->crtc);
+		ret = drm_encoder_init(lcdif->drm, encoder, &lcdif_encoder_funcs,
+				       DRM_MODE_ENCODER_NONE, NULL);
+		if (ret) {
+			dev_err(dev, "Failed to initialize encoder for endpoint%u: %d\n",
+				of_ep.id, ret);
+			of_node_put(ep);
+			return ret;
+		}
+
+		ret = drm_bridge_attach(encoder, bridge, NULL, 0);
+		if (ret) {
+			of_node_put(ep);
+			return dev_err_probe(dev, ret,
+					     "Failed to attach bridge for endpoint%u\n",
+					     of_ep.id);
+		}
+	}
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.h b/drivers/gpu/drm/mxsfb/lcdif_drv.h
index aa6d099a1897..c7400bd9bbd9 100644
--- a/drivers/gpu/drm/mxsfb/lcdif_drv.h
+++ b/drivers/gpu/drm/mxsfb/lcdif_drv.h
@@ -14,6 +14,8 @@
 #include <drm/drm_encoder.h>
 #include <drm/drm_plane.h>
 
+#define MAX_DISPLAYS	3
+
 struct clk;
 
 struct lcdif_drm_private {
@@ -30,7 +32,7 @@ struct lcdif_drm_private {
 		/* i.MXRT does support overlay planes, add them here. */
 	} planes;
 	struct drm_crtc			crtc;
-	struct drm_encoder		encoder;
+	struct drm_encoder		encoders[MAX_DISPLAYS];
 };
 
 static inline struct lcdif_drm_private *
diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c
index 4ea3d2b2cf61..5f34d01e133e 100644
--- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
+++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
@@ -654,14 +654,6 @@ static const struct drm_crtc_funcs lcdif_crtc_funcs = {
 	.disable_vblank = lcdif_crtc_disable_vblank,
 };
 
-/* -----------------------------------------------------------------------------
- * Encoder
- */
-
-static const struct drm_encoder_funcs lcdif_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 /* -----------------------------------------------------------------------------
  * Planes
  */
@@ -754,7 +746,6 @@ int lcdif_kms_init(struct lcdif_drm_private *lcdif)
 					BIT(DRM_COLOR_YCBCR_BT2020);
 	const u32 supported_ranges = BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) |
 				     BIT(DRM_COLOR_YCBCR_FULL_RANGE);
-	struct drm_encoder *encoder = &lcdif->encoder;
 	struct drm_crtc *crtc = &lcdif->crtc;
 	int ret;
 
@@ -778,13 +769,7 @@ int lcdif_kms_init(struct lcdif_drm_private *lcdif)
 		return ret;
 
 	drm_crtc_helper_add(crtc, &lcdif_crtc_helper_funcs);
-	ret = drm_crtc_init_with_planes(lcdif->drm, crtc,
-					&lcdif->planes.primary, NULL,
-					&lcdif_crtc_funcs, NULL);
-	if (ret)
-		return ret;
-
-	encoder->possible_crtcs = drm_crtc_mask(crtc);
-	return drm_encoder_init(lcdif->drm, encoder, &lcdif_encoder_funcs,
-				DRM_MODE_ENCODER_NONE, NULL);
+	return drm_crtc_init_with_planes(lcdif->drm, crtc,
+					 &lcdif->planes.primary, NULL,
+					 &lcdif_crtc_funcs, NULL);
 }
-- 
2.37.1


  parent reply	other threads:[~2023-01-25  6:40 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-25  6:40 [PATCH v2 0/6] drm: lcdif: Add i.MX93 LCDIF support Liu Ying
2023-01-25  6:40 ` [PATCH v2 1/6] dt-bindings: " Liu Ying
2023-01-25  6:40 ` [PATCH v2 2/6] drm: lcdif: Drop unnecessary NULL pointer check on lcdif->bridge Liu Ying
2023-01-25 13:56   ` Marek Vasut
2023-01-26  2:10     ` Liu Ying
2023-01-25  6:40 ` [PATCH v2 3/6] drm: lcdif: Determine bus format and flags in ->atomic_check() Liu Ying
2023-01-25  6:40 ` [PATCH v2 4/6] drm: lcdif: Check consistent bus format and flags across first bridges Liu Ying
2023-01-25  6:40 ` Liu Ying [this message]
2023-01-25  6:40 ` [PATCH v2 6/6] drm: lcdif: Add i.MX93 LCDIF compatible string Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230125064030.1222121-6-victor.liu@nxp.com \
    --to=victor.liu@nxp.com \
    --cc=LW@KARO-electronics.de \
    --cc=airlied@gmail.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).