Re: [PATCH v9 06/15] dt-bindings: mfd: amd,pensando-elbasr: Add AMD Pensando System Resource chip

[Brad Larson <blarson@amd.com>]

>> diff --git a/Documentation/devicetree/bindings/spi/amd,pensando-sr.yaml b/Documentation/devicetree/bindings/spi/amd,pensando-sr.yaml
>> new file mode 100644
>> index 000000000000..8504652f6e19
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/amd,pensando-sr.yaml
>> @@ -0,0 +1,68 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/amd,pensando-sr.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: AMD Pensando SoC Resource Controller
>> +
>> +description: |
>> +  AMD Pensando SoC Resource Controller is a set of
>> +  control/status registers accessed on four chip-selects.
>> +  This device is present in all Pensando SoC based designs.
>> +
>> +maintainers:
>> +  - Brad Larson <blarson@amd.com>
>> +
>> +properties:
>> +  compatible:
>> +    contains:
>
> That's not correct syntax. Please start from existing schema or
> example-schema. Drop contains.

Fixed, see update below.

>> +      enum:
>> +        - amd,pensando-sr
>> +
>> +  reg:
>> +    minItems: 1
>
> maxItems. Which example or existing schema pointed you to use minItems?

Should have been maxItems.  cs below is dropped and reg is used
as discussed for the chip selects but throws a too long error, see below.

>> +
>> +  cs:
>> +    minItems: 1
>> +    maxItems: 4
>> +    description:
>> +      Device chip select
>
> Drop entire property. Isn't reg for this on SPI bus?

Dropped and using reg, results in too long error for schema snps,dw-apb-ssi.yaml

>> +
>> +  '#reset-cells':
>> +    const: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  spi-max-frequency: true
>
>Drop. Missing reference to spi-peripheral-props.

Removed and added spi-peripheral-props

>> +
>> +required:
>> +  - compatible
>> +  - cs
>> +  - spi-max-frequency
>> +  - '#reset-cells'
>> +
>> +unevaluatedProperties: false
>
> This does not make sense on its own. It works with additional ref. When
> you add ref to spi props, it will be fine. But without it you should use
> additionalProperties: false.

The updated binding

--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/amd,pensando-sr.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/amd,pensando-sr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Pensando SoC Resource Controller
+
+description: |
+  AMD Pensando SoC Resource Controller is a set of control/status
+  registers accessed on four chip-selects.  This device is present
+  in all Pensando SoC based designs.
+
+  CS0 is a set of miscellaneous control/status registers to
+  include reset control.  CS1/CS2 are for I2C peripherals.
+  CS3 is to access resource controller internal storage.
+
+maintainers:
+  - Brad Larson <blarson@amd.com>
+
+properties:
+  compatible:
+    const: amd,pensando-sr
+
+  reg:
+    maxItems: 4
+    minimum: 0
+    maximum: 3
+    description:
+      Device chip select number
+
+  '#reset-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - '#reset-cells'
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        num-cs = <4>;
+
+        system-controller@0 {
+            compatible = "amd,pensando-sr";
+            reg = <0 1 2 3>;
+            spi-max-frequency = <12000000>;
+            interrupt-parent = <&porta>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            #reset-cells = <1>;
+        };
+    };
+
+...

any guidance on fixing the following?

$ make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
  LINT    Documentation/devicetree/bindings
  CHKDT   Documentation/devicetree/bindings/processed-schema.json
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  DTC_CHK arch/arm64/boot/dts/amd/elba-asic.dtb
/home/brad/linux.v10/arch/arm64/boot/dts/amd/elba-asic.dtb: spi@2800: system-controller@0:reg: [[0], [1], [2], [3]] is too long
	From schema: /home/brad/linux.v10/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

where the pieces are

arch/arm64/boot/dts/amd/elba.dtsi

                spi0: spi@2800 {
                        compatible = "amd,pensando-elba-spi";
                        reg = <0x0 0x2800 0x0 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        amd,pensando-elba-syscon = <&syscon>;
                        clocks = <&ahb_clk>;
                        interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
                        num-cs = <2>;
                        status = "disabled";
                };

                syscon: syscon@307c0000 {
                        compatible = "amd,pensando-elba-syscon", "syscon";
                        reg = <0x0 0x307c0000 0x0 0x3000>;
                };

arch/arm64/boot/dts/amd/elba-asic-common.dtsi

&spi0 {
        #address-cells = <1>;
        #size-cells = <0>;
        num-cs = <4>;
        cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>,
                   <&porta 7 GPIO_ACTIVE_LOW>;
        status = "okay";

        rstc: system-controller@0 {
                compatible = "amd,pensando-sr";
                reg = <0 1 2 3>;
                spi-max-frequency = <12000000>;
                interrupt-parent = <&porta>;
                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
                #reset-cells = <1>;
        };
};

Also should the driver for this SPI device used for every Pensando SoC 
be in drivers/misc, drivers/spi?  Didn't make sense to leave it in 
drivers/mfd once the resets was squashed in the parent and only one n
ode with reg setting which chip selects result in creation of /dev/pensr0.<cs>.  

Regards,
Brad