* [PATCH v5 01/11] MAINTAINERS: Match the sun20i family of Allwinner SoCs
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 02/11] dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors Samuel Holland
` (11 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Guo Ren
Allwinner sunxi SoCs with a RISC-V CPU use the sun20i designator. Match
that pattern in addition to the designators for 32 and 64-bit ARM SoCs.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v1)
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3b0148001f92..2600c85bdfd5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1887,7 +1887,7 @@ F: drivers/pinctrl/sunxi/
F: drivers/soc/sunxi/
N: allwinner
N: sun[x456789]i
-N: sun50i
+N: sun[25]0i
ARM/Amlogic Meson SoC CLOCK FRAMEWORK
M: Neil Armstrong <neil.armstrong@linaro.org>
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 02/11] dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
2023-01-26 4:57 ` [PATCH v5 01/11] MAINTAINERS: Match the sun20i family of Allwinner SoCs Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 03/11] dt-bindings: riscv: Add Allwinner D1/D1s board compatibles Samuel Holland
` (10 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Rob Herring, Guo Ren
Some boards using the Allwinner D1 or D1s SoC are made by vendors not
previously documented.
Clockwork Tech LLC (https://www.clockworkpi.com/) manufactures the
ClockworkPi and DevTerm boards.
Beijing Widora Technology Co., Ltd. (https://mangopi.cc/) manufactures
the MangoPi family of boards.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v4)
Changes in v4:
- Rebase on v6.2-rc1 + soc2arch-immutable
Documentation/devicetree/bindings/vendor-prefixes.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eac00f1c770e..b7055a43c6c4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -264,6 +264,8 @@ patternProperties:
description: Cirrus Logic, Inc.
"^cisco,.*":
description: Cisco Systems, Inc.
+ "^clockwork,.*":
+ description: Clockwork Tech LLC
"^cloos,.*":
description: Carl Cloos Schweisstechnik GmbH.
"^cloudengines,.*":
@@ -1448,6 +1450,8 @@ patternProperties:
description: Shenzhen whwave Electronics, Inc.
"^wi2wi,.*":
description: Wi2Wi, Inc.
+ "^widora,.*":
+ description: Beijing Widora Technology Co., Ltd.
"^wiligear,.*":
description: Wiligear, Ltd.
"^willsemi,.*":
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 03/11] dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
2023-01-26 4:57 ` [PATCH v5 01/11] MAINTAINERS: Match the sun20i family of Allwinner SoCs Samuel Holland
2023-01-26 4:57 ` [PATCH v5 02/11] dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 04/11] riscv: dts: allwinner: Add the D1/D1s SoC devicetree Samuel Holland
` (9 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Rob Herring, Conor Dooley, Guo Ren,
Heiko Stuebner
Several SoMs and boards are available that feature the Allwinner D1 or
D1s SoC. Document their compatible strings.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v2)
Changes in v2:
- Add MangoPi MQ (non-Pro) board
.../devicetree/bindings/riscv/sunxi.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/riscv/sunxi.yaml
diff --git a/Documentation/devicetree/bindings/riscv/sunxi.yaml b/Documentation/devicetree/bindings/riscv/sunxi.yaml
new file mode 100644
index 000000000000..9edb5e5992b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/sunxi.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/sunxi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner RISC-V SoC-based boards
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Jernej Skrabec <jernej.skrabec@gmail.com>
+ - Samuel Holland <samuel@sholland.org>
+
+description:
+ Allwinner RISC-V SoC-based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Dongshan Nezha STU SoM
+ items:
+ - const: 100ask,dongshan-nezha-stu
+ - const: allwinner,sun20i-d1
+
+ - description: D1 Nezha board
+ items:
+ - const: allwinner,d1-nezha
+ - const: allwinner,sun20i-d1
+
+ - description: ClockworkPi R-01 SoM and v3.14 board
+ items:
+ - const: clockwork,r-01-clockworkpi-v3.14
+ - const: allwinner,sun20i-d1
+
+ - description: ClockworkPi R-01 SoM, v3.14 board, and DevTerm expansion
+ items:
+ - const: clockwork,r-01-devterm-v3.14
+ - const: clockwork,r-01-clockworkpi-v3.14
+ - const: allwinner,sun20i-d1
+
+ - description: Lichee RV SoM
+ items:
+ - const: sipeed,lichee-rv
+ - const: allwinner,sun20i-d1
+
+ - description: Carrier boards for the Lichee RV SoM
+ items:
+ - enum:
+ - sipeed,lichee-rv-86-panel-480p
+ - sipeed,lichee-rv-86-panel-720p
+ - sipeed,lichee-rv-dock
+ - const: sipeed,lichee-rv
+ - const: allwinner,sun20i-d1
+
+ - description: MangoPi MQ board
+ items:
+ - const: widora,mangopi-mq
+ - const: allwinner,sun20i-d1s
+
+ - description: MangoPi MQ Pro board
+ items:
+ - const: widora,mangopi-mq-pro
+ - const: allwinner,sun20i-d1
+
+additionalProperties: true
+
+...
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 04/11] riscv: dts: allwinner: Add the D1/D1s SoC devicetree
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (2 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 03/11] dt-bindings: riscv: Add Allwinner D1/D1s board compatibles Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 05/11] riscv: dts: allwinner: Add MangoPi MQ devicetree Samuel Holland
` (8 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Conor Dooley, Heiko Stuebner
D1 (aka D1-H), D1s (aka F133), R528, and T113 are a family of SoCs based
on a single die, or at a pair of dies derived from the same design.
D1 and D1s contain a single T-HEAD Xuantie C906 CPU, whereas R528 and
T113 contain a pair of Cortex-A7's. D1 and R528 are the full version of
the chip with a BGA package, whereas D1s and T113 are low-pin-count QFP
variants.
Because the original design supported both ARM and RISC-V CPUs, some
peripherals are duplicated. In addition, all variants except D1s contain
a HiFi 4 DSP with its own set of peripherals.
The devicetrees are organized to minimize duplication:
- Common perhiperals are described in sunxi-d1s-t113.dtsi
- DSP-related peripherals are described in sunxi-d1-t113.dtsi
- RISC-V specific hardware is described in sun20i-d1s.dtsi
- Functionality unique to the D1 variant is described in sun20i-d1.dtsi
The SOC_PERIPHERAL_IRQ macro handles the different #interrupt-cells
values between the ARM (GIC) and RISC-V (PLIC) versions of the SoC.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes in v5:
- Drop system LDOs because the binding is still not merged
Changes in v3:
- Drop dummy DCXO clock-frequency property
- Decrease the PLIC's riscv,ndev property to 175
- Fix `make W=1 dtbs` warnings (unnecessary #address/#size-cells)
Changes in v2:
- Split into separate files for sharing with D1s/R528/T113
- Use SOC_PERIPHERAL_IRQ macro for interrupts
- Rename osc24M to dcxo and move the frequency to the board DTs
- Drop analog LDOs due to the missing binding
- Correct tcon_top DSI clock reference
- Add DMIC, DSI controller, and DPHY (bindings are in linux-next)
- Add CPU OPP table
arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 66 ++
arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 76 ++
.../boot/dts/allwinner/sunxi-d1-t113.dtsi | 15 +
.../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 826 ++++++++++++++++++
4 files changed, 983 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
new file mode 100644
index 000000000000..97e7cbb32597
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1s.dtsi"
+#include "sunxi-d1-t113.dtsi"
+
+/ {
+ soc {
+ lradc: keys@2009800 {
+ compatible = "allwinner,sun20i-d1-lradc",
+ "allwinner,sun50i-r329-lradc";
+ reg = <0x2009800 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(61) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LRADC>;
+ resets = <&ccu RST_BUS_LRADC>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@2032000 {
+ compatible = "allwinner,sun20i-d1-i2s",
+ "allwinner,sun50i-r329-i2s";
+ reg = <0x2032000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(26) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>,
+ <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_I2S0>;
+ dmas = <&dma 3>, <&dma 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #sound-dai-cells = <0>;
+ };
+ };
+};
+
+&pio {
+ /omit-if-no-ref/
+ dmic_pb11_d0_pin: dmic-pb11-d0-pin {
+ pins = "PB11";
+ function = "dmic";
+ };
+
+ /omit-if-no-ref/
+ dmic_pe17_clk_pin: dmic-pe17-clk-pin {
+ pins = "PE17";
+ function = "dmic";
+ };
+
+ /omit-if-no-ref/
+ i2c0_pb10_pins: i2c0-pb10-pins {
+ pins = "PB10", "PB11";
+ function = "i2c0";
+ };
+
+ /omit-if-no-ref/
+ i2c2_pb0_pins: i2c2-pb0-pins {
+ pins = "PB0", "PB1";
+ function = "i2c2";
+ };
+
+ /omit-if-no-ref/
+ uart0_pb8_pins: uart0-pb8-pins {
+ pins = "PB8", "PB9";
+ function = "uart0";
+ };
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
new file mode 100644
index 000000000000..8275630af977
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#define SOC_PERIPHERAL_IRQ(nr) (nr + 16)
+
+#include "sunxi-d1s-t113.dtsi"
+
+/ {
+ cpus {
+ timebase-frequency = <24000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "thead,c906", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&ccu CLK_RISCV>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <256>;
+ d-cache-size = <32768>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ mmu-type = "riscv,sv39";
+ operating-points-v2 = <&opp_table_cpu>;
+ riscv,isa = "rv64imafdc";
+ #cooling-cells = <2>;
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ opp_table_cpu: opp-table-cpu {
+ compatible = "operating-points-v2";
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <900000 900000 1100000>;
+ };
+
+ opp-1080000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <900000 900000 1100000>;
+ };
+ };
+
+ soc {
+ interrupt-parent = <&plic>;
+
+ riscv_wdt: watchdog@6011000 {
+ compatible = "allwinner,sun20i-d1-wdt";
+ reg = <0x6011000 0x20>;
+ interrupts = <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dcxo>, <&rtc CLK_OSC32K>;
+ clock-names = "hosc", "losc";
+ };
+
+ plic: interrupt-controller@10000000 {
+ compatible = "allwinner,sun20i-d1-plic",
+ "thead,c900-plic";
+ reg = <0x10000000 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu0_intc 9>;
+ interrupt-controller;
+ riscv,ndev = <175>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
new file mode 100644
index 000000000000..b7156123df54
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/ {
+ soc {
+ dsp_wdt: watchdog@1700400 {
+ compatible = "allwinner,sun20i-d1-wdt";
+ reg = <0x1700400 0x20>;
+ interrupts = <SOC_PERIPHERAL_IRQ(122) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dcxo>, <&rtc CLK_OSC32K>;
+ clock-names = "hosc", "losc";
+ status = "reserved";
+ };
+ };
+};
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
new file mode 100644
index 000000000000..3723612b1fd8
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -0,0 +1,826 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/clock/sun20i-d1-ccu.h>
+#include <dt-bindings/clock/sun20i-d1-r-ccu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun20i-d1-ccu.h>
+#include <dt-bindings/reset/sun20i-d1-r-ccu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ dcxo: dcxo-clk {
+ compatible = "fixed-clock";
+ clock-output-names = "dcxo";
+ #clock-cells = <0>;
+ };
+
+ de: display-engine {
+ compatible = "allwinner,sun20i-d1-display-engine";
+ allwinner,pipelines = <&mixer0>, <&mixer1>;
+ status = "disabled";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ dma-noncoherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pio: pinctrl@2000000 {
+ compatible = "allwinner,sun20i-d1-pinctrl";
+ reg = <0x2000000 0x800>;
+ interrupts = <SOC_PERIPHERAL_IRQ(69) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(71) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(73) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(75) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(77) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(79) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB0>,
+ <&dcxo>,
+ <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #gpio-cells = <3>;
+ #interrupt-cells = <3>;
+
+ /omit-if-no-ref/
+ clk_pg11_pin: clk-pg11-pin {
+ pins = "PG11";
+ function = "clk";
+ };
+
+ /omit-if-no-ref/
+ dsi_4lane_pins: dsi-4lane-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+ "PD6", "PD7", "PD8", "PD9";
+ drive-strength = <30>;
+ function = "dsi";
+ };
+
+ /omit-if-no-ref/
+ lcd_rgb666_pins: lcd-rgb666-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+ "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+ "PD18", "PD19", "PD20", "PD21";
+ function = "lcd0";
+ };
+
+ /omit-if-no-ref/
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+ function = "mmc0";
+ };
+
+ /omit-if-no-ref/
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
+ function = "mmc1";
+ };
+
+ /omit-if-no-ref/
+ mmc2_pins: mmc2-pins {
+ pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7";
+ function = "mmc2";
+ };
+
+ /omit-if-no-ref/
+ rgmii_pe_pins: rgmii-pe-pins {
+ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+ "PE5", "PE6", "PE7", "PE8", "PE9",
+ "PE11", "PE12", "PE13", "PE14", "PE15";
+ function = "emac";
+ };
+
+ /omit-if-no-ref/
+ rmii_pe_pins: rmii-pe-pins {
+ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+ "PE5", "PE6", "PE7", "PE8", "PE9";
+ function = "emac";
+ };
+
+ /omit-if-no-ref/
+ uart1_pg6_pins: uart1-pg6-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart1_pg8_rts_cts_pins: uart1-pg8-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart3_pb_pins: uart3-pb-pins {
+ pins = "PB6", "PB7";
+ function = "uart3";
+ };
+ };
+
+ ccu: clock-controller@2001000 {
+ compatible = "allwinner,sun20i-d1-ccu";
+ reg = <0x2001000 0x1000>;
+ clocks = <&dcxo>,
+ <&rtc CLK_OSC32K>,
+ <&rtc CLK_IOSC>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ dmic: dmic@2031000 {
+ compatible = "allwinner,sun20i-d1-dmic",
+ "allwinner,sun50i-h6-dmic";
+ reg = <0x2031000 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(24) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMIC>,
+ <&ccu CLK_DMIC>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_DMIC>;
+ dmas = <&dma 8>;
+ dma-names = "rx";
+ status = "disabled";
+ #sound-dai-cells = <0>;
+ };
+
+ i2s1: i2s@2033000 {
+ compatible = "allwinner,sun20i-d1-i2s",
+ "allwinner,sun50i-r329-i2s";
+ reg = <0x2033000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(27) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>,
+ <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_I2S1>;
+ dmas = <&dma 4>, <&dma 4>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #sound-dai-cells = <0>;
+ };
+
+ i2s2: i2s@2034000 {
+ compatible = "allwinner,sun20i-d1-i2s",
+ "allwinner,sun50i-r329-i2s";
+ reg = <0x2034000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(28) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>,
+ <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_I2S2>;
+ dmas = <&dma 5>, <&dma 5>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #sound-dai-cells = <0>;
+ };
+
+ timer: timer@2050000 {
+ compatible = "allwinner,sun20i-d1-timer",
+ "allwinner,sun8i-a23-timer";
+ reg = <0x2050000 0xa0>;
+ interrupts = <SOC_PERIPHERAL_IRQ(59) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(60) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dcxo>;
+ };
+
+ wdt: watchdog@20500a0 {
+ compatible = "allwinner,sun20i-d1-wdt-reset",
+ "allwinner,sun20i-d1-wdt";
+ reg = <0x20500a0 0x20>;
+ interrupts = <SOC_PERIPHERAL_IRQ(63) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dcxo>, <&rtc CLK_OSC32K>;
+ clock-names = "hosc", "losc";
+ status = "reserved";
+ };
+
+ uart0: serial@2500000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x2500000 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ dmas = <&dma 14>, <&dma 14>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@2500400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x2500400 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@2500800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x2500800 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ dmas = <&dma 16>, <&dma 16>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@2500c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x2500c00 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ dmas = <&dma 17>, <&dma 17>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart4: serial@2501000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x2501000 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ dmas = <&dma 18>, <&dma 18>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart5: serial@2501400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x2501400 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ dmas = <&dma 19>, <&dma 19>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c0: i2c@2502000 {
+ compatible = "allwinner,sun20i-d1-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502000 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(9) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ dmas = <&dma 43>, <&dma 43>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@2502400 {
+ compatible = "allwinner,sun20i-d1-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502400 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ dmas = <&dma 44>, <&dma 44>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@2502800 {
+ compatible = "allwinner,sun20i-d1-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502800 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(11) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ dmas = <&dma 45>, <&dma 45>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@2502c00 {
+ compatible = "allwinner,sun20i-d1-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502c00 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(12) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ dmas = <&dma 46>, <&dma 46>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ syscon: syscon@3000000 {
+ compatible = "allwinner,sun20i-d1-system-control";
+ reg = <0x3000000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun20i-d1-dma";
+ reg = <0x3002000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ resets = <&ccu RST_BUS_DMA>;
+ dma-channels = <16>;
+ dma-requests = <48>;
+ #dma-cells = <1>;
+ };
+
+ sid: efuse@3006000 {
+ compatible = "allwinner,sun20i-d1-sid";
+ reg = <0x3006000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ mbus: dram-controller@3102000 {
+ compatible = "allwinner,sun20i-d1-mbus";
+ reg = <0x3102000 0x1000>,
+ <0x3103000 0x1000>;
+ reg-names = "mbus", "dram";
+ interrupts = <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_MBUS>,
+ <&ccu CLK_DRAM>,
+ <&ccu CLK_BUS_DRAM>;
+ clock-names = "mbus", "dram", "bus";
+ dma-ranges = <0 0x40000000 0x80000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interconnect-cells = <1>;
+ };
+
+ mmc0: mmc@4020000 {
+ compatible = "allwinner,sun20i-d1-mmc";
+ reg = <0x4020000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ cap-sd-highspeed;
+ max-frequency = <150000000>;
+ no-mmc;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@4021000 {
+ compatible = "allwinner,sun20i-d1-mmc";
+ reg = <0x4021000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ cap-sd-highspeed;
+ max-frequency = <150000000>;
+ no-mmc;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@4022000 {
+ compatible = "allwinner,sun20i-d1-emmc",
+ "allwinner,sun50i-a100-emmc";
+ reg = <0x4022000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ cap-mmc-highspeed;
+ max-frequency = <150000000>;
+ mmc-ddr-1_8v;
+ mmc-ddr-3_3v;
+ no-sd;
+ no-sdio;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb_otg: usb@4100000 {
+ compatible = "allwinner,sun20i-d1-musb",
+ "allwinner,sun8i-a33-musb";
+ reg = <0x4100000 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(29) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ extcon = <&usbphy 0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: phy@4100400 {
+ compatible = "allwinner,sun20i-d1-usb-phy";
+ reg = <0x4100400 0x100>,
+ <0x4101800 0x100>,
+ <0x4200800 0x100>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1";
+ clocks = <&dcxo>,
+ <&dcxo>;
+ clock-names = "usb0_phy",
+ "usb1_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>;
+ reset-names = "usb0_reset",
+ "usb1_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@4101000 {
+ compatible = "allwinner,sun20i-d1-ehci",
+ "generic-ehci";
+ reg = <0x4101000 0x100>;
+ interrupts = <SOC_PERIPHERAL_IRQ(30) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_BUS_EHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>,
+ <&ccu RST_BUS_EHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@4101400 {
+ compatible = "allwinner,sun20i-d1-ohci",
+ "generic-ohci";
+ reg = <0x4101400 0x100>;
+ interrupts = <SOC_PERIPHERAL_IRQ(31) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci1: usb@4200000 {
+ compatible = "allwinner,sun20i-d1-ehci",
+ "generic-ehci";
+ reg = <0x4200000 0x100>;
+ interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_BUS_EHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>,
+ <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@4200400 {
+ compatible = "allwinner,sun20i-d1-ohci",
+ "generic-ohci";
+ reg = <0x4200400 0x100>;
+ interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ emac: ethernet@4500000 {
+ compatible = "allwinner,sun20i-d1-emac",
+ "allwinner,sun50i-a64-emac";
+ reg = <0x4500000 0x10000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ syscon = <&syscon>;
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ display_clocks: clock-controller@5000000 {
+ compatible = "allwinner,sun20i-d1-de2-clk",
+ "allwinner,sun50i-h5-de2-clk";
+ reg = <0x5000000 0x10000>;
+ clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mixer0: mixer@5100000 {
+ compatible = "allwinner,sun20i-d1-de2-mixer-0";
+ reg = <0x5100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus", "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+
+ mixer0_out_tcon_top_mixer0: endpoint {
+ remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+ };
+ };
+ };
+ };
+
+ mixer1: mixer@5200000 {
+ compatible = "allwinner,sun20i-d1-de2-mixer-1";
+ reg = <0x5200000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER1>,
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus", "mod";
+ resets = <&display_clocks RST_MIXER1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer1_out: port@1 {
+ reg = <1>;
+
+ mixer1_out_tcon_top_mixer1: endpoint {
+ remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+ };
+ };
+ };
+ };
+
+ dsi: dsi@5450000 {
+ compatible = "allwinner,sun20i-d1-mipi-dsi",
+ "allwinner,sun50i-a100-mipi-dsi";
+ reg = <0x5450000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&tcon_top CLK_TCON_TOP_DSI>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ phys = <&dphy>;
+ phy-names = "dphy";
+ status = "disabled";
+
+ port {
+ dsi_in_tcon_lcd0: endpoint {
+ remote-endpoint = <&tcon_lcd0_out_dsi>;
+ };
+ };
+ };
+
+ dphy: phy@5451000 {
+ compatible = "allwinner,sun20i-d1-mipi-dphy",
+ "allwinner,sun50i-a100-mipi-dphy";
+ reg = <0x5451000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_MIPI_DSI>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ #phy-cells = <0>;
+ };
+
+ tcon_top: tcon-top@5460000 {
+ compatible = "allwinner,sun20i-d1-tcon-top";
+ reg = <0x5460000 0x1000>;
+ clocks = <&ccu CLK_BUS_DPSS_TOP>,
+ <&ccu CLK_TCON_TV>,
+ <&ccu CLK_TVE>,
+ <&ccu CLK_TCON_LCD0>;
+ clock-names = "bus", "tcon-tv0", "tve0", "dsi";
+ clock-output-names = "tcon-top-tv0", "tcon-top-dsi";
+ resets = <&ccu RST_BUS_DPSS_TOP>;
+ #clock-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer0_in: port@0 {
+ reg = <0>;
+
+ tcon_top_mixer0_in_mixer0: endpoint {
+ remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+ };
+ };
+
+ tcon_top_mixer0_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>;
+ };
+
+ tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+ };
+ };
+
+ tcon_top_mixer1_in: port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer1_in_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon_top_mixer1>;
+ };
+ };
+
+ tcon_top_mixer1_out: port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer1>;
+ };
+
+ tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+ };
+ };
+
+ tcon_top_hdmi_in: port@4 {
+ reg = <4>;
+
+ tcon_top_hdmi_in_tcon_tv0: endpoint {
+ remote-endpoint = <&tcon_tv0_out_tcon_top_hdmi>;
+ };
+ };
+
+ tcon_top_hdmi_out: port@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ tcon_lcd0: lcd-controller@5461000 {
+ compatible = "allwinner,sun20i-d1-tcon-lcd";
+ reg = <0x5461000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(90) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON_LCD0>,
+ <&ccu CLK_TCON_LCD0>;
+ clock-names = "ahb", "tcon-ch0";
+ clock-output-names = "tcon-pixel-clock";
+ resets = <&ccu RST_BUS_TCON_LCD0>,
+ <&ccu RST_BUS_LVDS0>;
+ reset-names = "lcd", "lvds";
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_lcd0_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_lcd0_in_tcon_top_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>;
+ };
+
+ tcon_lcd0_in_tcon_top_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon_top_mixer1_out_tcon_lcd0>;
+ };
+ };
+
+ tcon_lcd0_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_lcd0_out_dsi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in_tcon_lcd0>;
+ };
+ };
+ };
+ };
+
+ tcon_tv0: lcd-controller@5470000 {
+ compatible = "allwinner,sun20i-d1-tcon-tv";
+ reg = <0x5470000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON_TV>,
+ <&tcon_top CLK_TCON_TOP_TV0>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON_TV>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_tv0_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+ };
+
+ tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+ };
+ };
+
+ tcon_tv0_out: port@1 {
+ reg = <1>;
+
+ tcon_tv0_out_tcon_top_hdmi: endpoint {
+ remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+ };
+ };
+ };
+ };
+
+ r_ccu: clock-controller@7010000 {
+ compatible = "allwinner,sun20i-d1-r-ccu";
+ reg = <0x7010000 0x400>;
+ clocks = <&dcxo>,
+ <&rtc CLK_OSC32K>,
+ <&rtc CLK_IOSC>,
+ <&ccu CLK_PLL_PERIPH0_DIV3>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ rtc: rtc@7090000 {
+ compatible = "allwinner,sun20i-d1-rtc",
+ "allwinner,sun50i-r329-rtc";
+ reg = <0x7090000 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(144) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_BUS_R_RTC>,
+ <&dcxo>,
+ <&r_ccu CLK_R_AHB>;
+ clock-names = "bus", "hosc", "ahb";
+ #clock-cells = <1>;
+ };
+ };
+};
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 05/11] riscv: dts: allwinner: Add MangoPi MQ devicetree
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (3 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 04/11] riscv: dts: allwinner: Add the D1/D1s SoC devicetree Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 06/11] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree Samuel Holland
` (7 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Guo Ren
The MangoPi MQ is a tiny SBC built around the Allwinner D1s. Its
onboard peripherals include two USB Type-C ports (1 device, 1 host)
and RTL8189FTV WLAN.
A MangoPi MQ-R variant of the board also exists. The MQ-R has a
different form factor, but the onboard peripherals are the same.
Most D1 and D1s boards use a similar power tree, with the 1.8V rail
powered by the SoC's internal LDOA, analog domains powered by ALDO,
and the rest of the board powered by always-on fixed regulators. To
avoid duplication, factor out the regulator information that is
common across boards.
The board also exposes GPIO Port E via a FPC connector, which can
support either a camera or an RMII Ethernet PHY. The additional
regulators supply that connector.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes in v5:
- Drop the configuration for LDOA and LDOB
Changes in v3:
- Drop mmc aliases
- Change LED_FUNCTION_BACKLIGHT to LED_FUNCTION_STATUS (the backlight
regulator is disconnected by default, so this is a standalone LED)
Changes in v2:
- New patch for v2
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/allwinner/Makefile | 2 +
.../allwinner/sun20i-common-regulators.dtsi | 28 ++++
.../dts/allwinner/sun20i-d1s-mangopi-mq.dts | 128 ++++++++++++++++++
4 files changed, 159 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 0c97d673b775..f0d9f89054f8 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+subdir-y += allwinner
subdir-y += sifive
subdir-y += starfive
subdir-y += canaan
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..2f2792594f7d
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
new file mode 100644
index 000000000000..9b03fca2444c
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/ {
+ reg_vcc: vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vcc_3v3: vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_vcc>;
+ };
+};
+
+&pio {
+ vcc-pb-supply = <®_vcc_3v3>;
+ vcc-pc-supply = <®_vcc_3v3>;
+ vcc-pd-supply = <®_vcc_3v3>;
+ vcc-pe-supply = <®_vcc_3v3>;
+ vcc-pf-supply = <®_vcc_3v3>;
+ vcc-pg-supply = <®_vcc_3v3>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
new file mode 100644
index 000000000000..e6d924f671fd
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1s.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+ model = "MangoPi MQ";
+ compatible = "widora,mangopi-mq", "allwinner,sun20i-d1s";
+
+ aliases {
+ ethernet0 = &rtl8189ftv;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+ };
+ };
+
+ reg_avdd2v8: avdd2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_vcc_3v3>;
+ };
+
+ reg_dvdd: dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <®_vcc_3v3>;
+ };
+
+ reg_vcc_core: vcc-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-core";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <®_vcc>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vcc_core>;
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtl8189ftv: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pe-supply = <®_avdd2v8>;
+};
+
+&uart3 {
+ pinctrl-0 = <&uart3_pb_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc>;
+ status = "okay";
+};
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 06/11] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (4 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 05/11] riscv: dts: allwinner: Add MangoPi MQ devicetree Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 07/11] riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees Samuel Holland
` (6 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Guo Ren, Conor Dooley
"D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
plus low-speed I/O from the SoC and a GPIO expander chip.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v3)
Changes in v3:
- Drop mmc alias
Changes in v2:
- Common regulators moved to MangoPi MQ patch, removed analog LDOs
- Removed LRADC (depends on analog LDOs)
- Added XR829 host-wake interrupt
arch/riscv/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun20i-d1-nezha.dts | 166 ++++++++++++++++++
2 files changed, 167 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
index 2f2792594f7d..277e59d1c907 100644
--- a/arch/riscv/boot/dts/allwinner/Makefile
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
new file mode 100644
index 000000000000..a0769185be97
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+ model = "Allwinner D1 Nezha";
+ compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
+
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &xr829;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_usbvbus: usbvbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbvbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ enable-active-high;
+ vin-supply = <®_vcc>;
+ };
+
+ /*
+ * This regulator is PWM-controlled, but the PWM controller is not
+ * yet supported, so fix the regulator to its default voltage.
+ */
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <®_vcc>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpu>;
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-0 = <&rgmii_pe_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcf8574a: gpio@38 {
+ compatible = "nxp,pcf8574a";
+ reg = <0x38>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ disable-wp;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ xr829: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ usb0_vbus-supply = <®_usbvbus>;
+ usb1_vbus-supply = <®_vcc>;
+ status = "okay";
+};
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 07/11] riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (5 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 06/11] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 08/11] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree Samuel Holland
` (5 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt
Sipeed manufactures a "Lichee RV" system-on-module, which provides a
minimal working system on its own, as well as a few carrier boards. The
"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
provides 100M Ethernet and a built-in display panel.
The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
panel interface, since the USB OTG port is inaccessible inside the case.
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v3)
Changes in v3:
- Fix `make W=1 dtbs` warnings (missing reg properties)
- Drop mmc alias
Changes in v2:
- Added DMIC sound card to Lichee RV dock and Lichee RV 86 Panel
- Removed LRADC (depends on analog LDOs)
arch/riscv/boot/dts/allwinner/Makefile | 4 +
.../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 +++++
.../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 ++
.../sun20i-d1-lichee-rv-86-panel.dtsi | 119 ++++++++++++++++++
.../allwinner/sun20i-d1-lichee-rv-dock.dts | 97 ++++++++++++++
.../dts/allwinner/sun20i-d1-lichee-rv.dts | 87 +++++++++++++
6 files changed, 346 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
index 277e59d1c907..f1c70b9dc9bf 100644
--- a/arch/riscv/boot/dts/allwinner/Makefile
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -1,3 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
new file mode 100644
index 000000000000..4df8ffb71561
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
+
+/ {
+ model = "Sipeed Lichee RV 86 Panel (480p)";
+ compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ touchscreen@48 {
+ compatible = "focaltech,ft6236";
+ reg = <0x48>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 14 IRQ_TYPE_LEVEL_LOW>; /* PG14 */
+ iovcc-supply = <®_vcc_3v3>;
+ reset-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <480>;
+ vcc-supply = <®_vcc_3v3>;
+ wakeup-source;
+ };
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
new file mode 100644
index 000000000000..1874fc05359f
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
+
+/ {
+ model = "Sipeed Lichee RV 86 Panel (720p)";
+ compatible = "sipeed,lichee-rv-86-panel-720p", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
new file mode 100644
index 000000000000..6cc7dd0c1ae2
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv.dts"
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &xr829;
+ };
+
+ dmic_codec: dmic-codec {
+ compatible = "dmic-codec";
+ num-channels = <2>;
+ #sound-dai-cells = <0>;
+ };
+
+ dmic-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DMIC";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "pdm";
+ frame-master = <&link0_cpu>;
+ bitclock-master = <&link0_cpu>;
+
+ link0_cpu: cpu {
+ sound-dai = <&dmic>;
+ };
+
+ link0_codec: codec {
+ sound-dai = <&dmic_codec>;
+ };
+ };
+ };
+
+ /* PC1 is repurposed as BT_WAKE_AP */
+ /delete-node/ leds;
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&ccu CLK_FANOUT1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ assigned-clocks = <&ccu CLK_FANOUT1>;
+ assigned-clock-rates = <32768>;
+ pinctrl-0 = <&clk_pg11_pin>;
+ pinctrl-names = "default";
+ };
+};
+
+&dmic {
+ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-0 = <&rmii_pe_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&ext_rmii_phy>;
+ phy-mode = "rmii";
+ phy-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+ };
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ xr829: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+ status = "disabled";
+};
+
+&usbphy {
+ /* PD20 and PD21 are repurposed for the LCD panel */
+ /delete-property/ usb0_id_det-gpios;
+ /delete-property/ usb0_vbus_det-gpios;
+ usb1_vbus-supply = <®_vcc>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
new file mode 100644
index 000000000000..52b91e1affed
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/input/input.h>
+
+#include "sun20i-d1-lichee-rv.dts"
+
+/ {
+ model = "Sipeed Lichee RV Dock";
+ compatible = "sipeed,lichee-rv-dock", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
+
+ aliases {
+ ethernet1 = &rtl8723ds;
+ };
+
+ dmic_codec: dmic-codec {
+ compatible = "dmic-codec";
+ num-channels = <2>;
+ #sound-dai-cells = <0>;
+ };
+
+ dmic-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DMIC";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "pdm";
+ frame-master = <&link0_cpu>;
+ bitclock-master = <&link0_cpu>;
+
+ link0_cpu: cpu {
+ sound-dai = <&dmic>;
+ };
+
+ link0_codec: codec {
+ sound-dai = <&dmic_codec>;
+ };
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+};
+
+&dmic {
+ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtl8723ds: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */
+ enable-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+ host-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+ };
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
new file mode 100644
index 000000000000..d60a0562a8b1
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+ model = "Sipeed Lichee RV";
+ compatible = "sipeed,lichee-rv", "allwinner,sun20i-d1";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+ };
+ };
+
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <®_vcc>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpu>;
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ disable-wp;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ usb0_vbus-supply = <®_vcc>;
+ status = "okay";
+};
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 08/11] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (6 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 07/11] riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 09/11] riscv: dts: allwinner: Add Dongshan Nezha STU devicetree Samuel Holland
` (4 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Guo Ren
The MangoPi MQ Pro is a tiny SBC with a layout compatible to the
Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3,
and an RTL8723DS-based WiFi/Bluetooth module.
The board also exposes GPIO Port E via a connector on the end of the
board, which can support either a camera or an RMII Ethernet PHY. The
additional regulators supply that connector.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v3)
Changes in v3:
- Drop mmc alias
- Change LED_FUNCTION_BACKLIGHT to LED_FUNCTION_STATUS (the backlight
regulator is disconnected by default, so this is a standalone LED)
Changes in v2:
- Added LED (GPIO shared between onboard LED and backlight regulator)
arch/riscv/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun20i-d1-mangopi-mq-pro.dts | 142 ++++++++++++++++++
2 files changed, 143 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
index f1c70b9dc9bf..2ed586fafaea 100644
--- a/arch/riscv/boot/dts/allwinner/Makefile
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-mangopi-mq-pro.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
new file mode 100644
index 000000000000..f2e07043afb3
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+ model = "MangoPi MQ Pro";
+ compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1";
+
+ aliases {
+ ethernet0 = &rtl8723ds;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+ };
+ };
+
+ reg_avdd2v8: avdd2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_vcc_3v3>;
+ };
+
+ reg_dvdd: dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <®_vcc_3v3>;
+ };
+
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <®_vcc>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpu>;
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ disable-wp;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtl8723ds: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pe-supply = <®_avdd2v8>;
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+ enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */
+ host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */
+ };
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc>;
+ status = "okay";
+};
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 09/11] riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (7 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 08/11] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 10/11] riscv: Add the Allwinner SoC family Kconfig option Samuel Holland
` (3 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Palmer Dabbelt, Guo Ren
The 100ask Dongshan Nezha STU is a system-on-module that can be used
standalone or with a carrier board. The SoM provides gigabit Ethernet,
HDMI, a USB peripheral port, and WiFi/Bluetooth via an RTL8723DS chip.
The "DIY" carrier board exposes almost every pin from the D1 SoC to 0.1"
headers, but contains no digital circuitry, so it does not have its own
devicetree.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v3)
Changes in v3:
- Drop mmc alias
arch/riscv/boot/dts/allwinner/Makefile | 1 +
.../sun20i-d1-dongshan-nezha-stu.dts | 117 ++++++++++++++++++
2 files changed, 118 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
index 2ed586fafaea..87f70b1af6b4 100644
--- a/arch/riscv/boot/dts/allwinner/Makefile
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
new file mode 100644
index 000000000000..8785de3c9224
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+ model = "Dongshan Nezha STU";
+ compatible = "100ask,dongshan-nezha-stu", "allwinner,sun20i-d1";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+ };
+ };
+
+ reg_usbvbus: usbvbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbvbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ enable-active-high;
+ vin-supply = <®_vcc>;
+ };
+
+ /*
+ * This regulator is PWM-controlled, but the PWM controller is not
+ * yet supported, so fix the regulator to its default voltage.
+ */
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <®_vcc>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpu>;
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-0 = <&rgmii_pe_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ disable-wp;
+ vmmc-supply = <®_vcc_3v3>;
+ vqmmc-supply = <®_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ usb0_vbus-supply = <®_usbvbus>;
+ status = "okay";
+};
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 10/11] riscv: Add the Allwinner SoC family Kconfig option
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (8 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 09/11] riscv: dts: allwinner: Add Dongshan Nezha STU devicetree Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 4:57 ` [PATCH v5 11/11] riscv: defconfig: Enable the Allwinner D1 platform and drivers Samuel Holland
` (2 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Conor Dooley, Palmer Dabbelt, Guo Ren
Allwinner manufactures the sunxi family of application processors. This
includes the "sun8i" series of ARMv7 SoCs, the "sun50i" series of ARMv8
SoCs, and now the "sun20i" series of 64-bit RISC-V SoCs.
The first SoC in the sun20i series is D1, containing a single T-HEAD
C906 core. D1s is a low-pin-count variant of D1 with co-packaged DRAM.
Most peripherals are shared across the entire chip family. In fact, the
ARMv7 T113 SoC is pin-compatible and almost entirely register-compatible
with the D1s.
This means many existing device drivers can be reused. To facilitate
this reuse, name the symbol ARCH_SUNXI, since that is what the existing
drivers have as their dependency.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v4)
Changes in v4:
- Drop the now-redundant 'select SIFIVE_PLIC'
- Rebase on v6.2-rc1 + soc2arch-immutable
Changes in v3:
- ARCH_SUNXI depends on MMU && !XIP_KERNEL
Changes in v2:
- Sort Kconfig as if we had done s/SOC_/ARCH_/ for future-proofing
arch/riscv/Kconfig.socs | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 659140309157..1cf69f958f10 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -32,6 +32,15 @@ config SOC_STARFIVE
help
This enables support for StarFive SoC platform hardware.
+config ARCH_SUNXI
+ bool "Allwinner sun20i SoCs"
+ depends on MMU && !XIP_KERNEL
+ select ERRATA_THEAD
+ select SUN4I_TIMER
+ help
+ This enables support for Allwinner sun20i platform hardware,
+ including boards based on the D1 and D1s SoCs.
+
config ARCH_VIRT
def_bool SOC_VIRT
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 11/11] riscv: defconfig: Enable the Allwinner D1 platform and drivers
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (9 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 10/11] riscv: Add the Allwinner SoC family Kconfig option Samuel Holland
@ 2023-01-26 4:57 ` Samuel Holland
2023-01-26 8:00 ` [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Conor Dooley
2023-01-27 22:16 ` Jernej Škrabec
12 siblings, 0 replies; 14+ messages in thread
From: Samuel Holland @ 2023-01-26 4:57 UTC (permalink / raw)
To: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland,
Conor Dooley, Palmer Dabbelt, Guo Ren, Heiko Stuebner
Now that several D1-based boards are supported, enable the platform in
our defconfig. Build in the drivers which are necessary to boot, such as
the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
and watchdog (which may be left enabled by the bootloader). Other common
onboard peripherals are enabled as modules.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v4)
Changes in v4:
- Rebase on v6.2-rc1 + soc2arch-immutable
arch/riscv/configs/defconfig | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 128dcf4c0814..d98d6e90b2b8 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -29,6 +29,7 @@ CONFIG_SOC_MICROCHIP_POLARFIRE=y
CONFIG_ARCH_RENESAS=y
CONFIG_SOC_SIFIVE=y
CONFIG_SOC_STARFIVE=y
+CONFIG_ARCH_SUNXI=y
CONFIG_SOC_VIRT=y
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
@@ -120,8 +121,10 @@ CONFIG_VIRTIO_NET=y
CONFIG_MACB=y
CONFIG_E1000E=y
CONFIG_R8169=y
+CONFIG_STMMAC_ETH=m
CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
+CONFIG_KEYBOARD_SUN4I_LRADC=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
@@ -130,14 +133,20 @@ CONFIG_SERIAL_SH_SCI=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C_MV64XXX=m
CONFIG_SPI=y
CONFIG_SPI_SIFIVE=y
+CONFIG_SPI_SUN6I=y
# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_SUN4I=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -150,21 +159,32 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SUNXI=m
+CONFIG_NOP_USB_XCEIV=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SPI=y
+CONFIG_MMC_SUNXI=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=m
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
+CONFIG_SUN8I_DE2_CCU=m
+CONFIG_SUN50I_IOMMU=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_VIRTIO=y
CONFIG_ARCH_R9A07G043=y
+CONFIG_PHY_SUN4I_USB=m
CONFIG_LIBNVDIMM=y
+CONFIG_NVMEM_SUNXI_SID=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
--
2.37.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (10 preceding siblings ...)
2023-01-26 4:57 ` [PATCH v5 11/11] riscv: defconfig: Enable the Allwinner D1 platform and drivers Samuel Holland
@ 2023-01-26 8:00 ` Conor Dooley
2023-01-27 22:16 ` Jernej Škrabec
12 siblings, 0 replies; 14+ messages in thread
From: Conor Dooley @ 2023-01-26 8:00 UTC (permalink / raw)
To: Samuel Holland
Cc: Chen-Yu Tsai, Jernej Skrabec, linux-sunxi, linux-riscv,
Heiko Stuebner, Palmer Dabbelt, Conor Dooley, Jisheng Zhang,
Krzysztof Kozlowski, devicetree, linux-kernel, Andre Przywara,
Rob Herring, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 573 bytes --]
On Wed, Jan 25, 2023 at 10:57:27PM -0600, Samuel Holland wrote:
> This series adds the Kconfig/defconfig plumbing and devicetrees for a
> range of Allwinner D1 and D1s-based boards. Many features are already
> enabled, including USB, Ethernet, and WiFi.
>
> This version drops all boards/nodes with missing YAML bindings, so at
> least some support can get merged for v6.3.
That'd be great! Pity the LDO stuff isn't ready yet, but definitely
better to have this stuff in rather than out. In case it helps:
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support
2023-01-26 4:57 [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Samuel Holland
` (11 preceding siblings ...)
2023-01-26 8:00 ` [PATCH v5 00/11] riscv: Allwinner D1/D1s platform support Conor Dooley
@ 2023-01-27 22:16 ` Jernej Škrabec
12 siblings, 0 replies; 14+ messages in thread
From: Jernej Škrabec @ 2023-01-27 22:16 UTC (permalink / raw)
To: Chen-Yu Tsai, linux-sunxi, Samuel Holland
Cc: linux-riscv, Heiko Stuebner, Palmer Dabbelt, Conor Dooley,
Jisheng Zhang, Krzysztof Kozlowski, devicetree, linux-kernel,
Andre Przywara, Rob Herring, linux-arm-kernel, Samuel Holland
Dne četrtek, 26. januar 2023 ob 05:57:27 CET je Samuel Holland napisal(a):
> This series adds the Kconfig/defconfig plumbing and devicetrees for a
> range of Allwinner D1 and D1s-based boards. Many features are already
> enabled, including USB, Ethernet, and WiFi.
>
> This version drops all boards/nodes with missing YAML bindings, so at
> least some support can get merged for v6.3.
>
> $ make ARCH=riscv CROSS_COMPILE=riscv64-linux-musl- dtbs_check
> LINT Documentation/devicetree/bindings
> CHKDT Documentation/devicetree/bindings/processed-schema.json
> SCHEMA Documentation/devicetree/bindings/processed-schema.json
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dtb
> DTC_CHK
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dtb DTC_CHK
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dtb DTC_CHK
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dtb DTC_CHK
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dtb
> $
>
> Note that validation requires dt-schema v2022.12 or newer.
>
> I thoroughly tested earlier versions of this series (DMIC, Ethernet,
> LEDs, MMC, PMIC, touch, and USB, where available) on several boards.
> v4/v5 have trivial changes, and I boot-tested them on sun20i-d1-nezha.
>
> Changes in v5:
> - Drop system LDOs because the binding is still not merged
> - Drop the configuration for LDOA and LDOB
> - Drop the ClockworkPi and DevTerm DTS, since it needs the system LDOs
>
> Changes in v4:
> - Rebase on v6.2-rc1 + soc2arch-immutable
> - Drop the now-redundant 'select SIFIVE_PLIC'
>
> Changes in v3:
> - Drop dummy DCXO clock-frequency property
> - Decrease the PLIC's riscv,ndev property to 175
> - Fix `make W=1 dtbs` warnings (unnecessary #address/#size-cells)
> - Drop mmc aliases
> - Change LED_FUNCTION_BACKLIGHT to LED_FUNCTION_STATUS (the backlight
> regulator is disconnected by default, so this is a standalone LED)
> - Fix `make W=1 dtbs` warnings (missing reg properties)
> - ARCH_SUNXI depends on MMU && !XIP_KERNEL
>
> Changes in v2:
> - Add MangoPi MQ (non-Pro) board
> - Split into separate files for sharing with D1s/R528/T113
> - Use SOC_PERIPHERAL_IRQ macro for interrupts
> - Rename osc24M to dcxo and move the frequency to the board DTs
> - Drop analog LDOs due to the missing binding
> - Correct tcon_top DSI clock reference
> - Add DMIC, DSI controller, and DPHY (bindings are in linux-next)
> - Add CPU OPP table
> - Common regulators moved to MangoPi MQ patch, removed analog LDOs
> - Removed LRADC (depends on analog LDOs)
> - Added XR829 host-wake interrupt
> - Added DMIC sound card to Lichee RV dock and Lichee RV 86 Panel
> - Removed LRADC (depends on analog LDOs)
> - Added LED (GPIO shared between onboard LED and backlight regulator)
> - Sort Kconfig as if we had done s/SOC_/ARCH_/ for future-proofing
>
> Samuel Holland (11):
> MAINTAINERS: Match the sun20i family of Allwinner SoCs
> dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
> dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
> riscv: dts: allwinner: Add the D1/D1s SoC devicetree
> riscv: dts: allwinner: Add MangoPi MQ devicetree
> riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
> riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
> riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
> riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
> riscv: Add the Allwinner SoC family Kconfig option
> riscv: defconfig: Enable the Allwinner D1 platform and drivers
Applied to sunxi tree. Thanks for your hard work!
Best regards,
Jernej
>
> .../devicetree/bindings/riscv/sunxi.yaml | 69 ++
> .../devicetree/bindings/vendor-prefixes.yaml | 4 +
> MAINTAINERS | 2 +-
> arch/riscv/Kconfig.socs | 9 +
> arch/riscv/boot/dts/Makefile | 1 +
> arch/riscv/boot/dts/allwinner/Makefile | 9 +
> .../allwinner/sun20i-common-regulators.dtsi | 28 +
> .../sun20i-d1-dongshan-nezha-stu.dts | 117 +++
> .../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 +
> .../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 +
> .../sun20i-d1-lichee-rv-86-panel.dtsi | 119 +++
> .../allwinner/sun20i-d1-lichee-rv-dock.dts | 97 ++
> .../dts/allwinner/sun20i-d1-lichee-rv.dts | 87 ++
> .../allwinner/sun20i-d1-mangopi-mq-pro.dts | 142 +++
> .../boot/dts/allwinner/sun20i-d1-nezha.dts | 166 ++++
> arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 66 ++
> .../dts/allwinner/sun20i-d1s-mangopi-mq.dts | 128 +++
> arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 76 ++
> .../boot/dts/allwinner/sunxi-d1-t113.dtsi | 15 +
> .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 826 ++++++++++++++++++
> arch/riscv/configs/defconfig | 22 +-
> 21 files changed, 2020 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/riscv/sunxi.yaml
> create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
> create mode 100644
> arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi create mode
> 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
> create mode 100644
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts create
> mode 100644
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts create
> mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
> create mode 100644
> arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts create mode
> 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts create mode
> 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts create
> mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts create mode
> 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
^ permalink raw reply [flat|nested] 14+ messages in thread