* [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
@ 2023-01-29 23:10 Randy Dunlap
2023-01-29 23:10 ` [PATCH 1/9] Documentation: admin-guide: correct spelling Randy Dunlap
` (11 more replies)
0 siblings, 12 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Tejun Heo, Zefan Li,
Johannes Weiner, cgroups, Alasdair Kergon, Mike Snitzer,
dm-devel, Mauro Carvalho Chehab, linux-media, linux-mm,
Dan Williams, Vishal Verma, Dave Jiang, nvdimm, Vinod Koul,
dmaengine, Song Liu, linux-raid, Greg Kroah-Hartman, linux-usb,
Jean Delvare, Guenter Roeck, linux-hwmon, Jiri Pirko,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
netdev, Paul E. McKenney, Frederic Weisbecker, Neeraj Upadhyay,
Josh Triplett, rcu, James E.J. Bottomley, Martin K. Petersen,
linux-scsi, sparclinux
Maintainers of specific kernel subsystems are only Cc-ed on their
respective patches, not the entire series. [if all goes well]
These patches are based on linux-next-20230127.
[PATCH 1/9] Documentation: admin-guide: correct spelling
[PATCH 2/9] Documentation: driver-api: correct spelling
[PATCH 3/9] Documentation: hwmon: correct spelling
[PATCH 4/9] Documentation: networking: correct spelling
[PATCH 5/9] Documentation: RCU: correct spelling
[PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
[PATCH 7/9] Documentation: scsi: correct spelling
[PATCH 8/9] Documentation: sparc: correct spelling
[PATCH 9/9] Documentation: userspace-api: correct spelling
Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst | 6 -
Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst | 2
Documentation/RCU/RTFP.txt | 10 +-
Documentation/RCU/UP.rst | 4
Documentation/RCU/lockdep.rst | 2
Documentation/RCU/torture.rst | 4
Documentation/admin-guide/bcache.rst | 2
Documentation/admin-guide/cgroup-v1/blkio-controller.rst | 2
Documentation/admin-guide/cgroup-v2.rst | 10 +-
Documentation/admin-guide/cifs/usage.rst | 4
Documentation/admin-guide/device-mapper/cache-policies.rst | 2
Documentation/admin-guide/device-mapper/dm-ebs.rst | 2
Documentation/admin-guide/device-mapper/dm-zoned.rst | 2
Documentation/admin-guide/device-mapper/unstriped.rst | 10 +-
Documentation/admin-guide/dynamic-debug-howto.rst | 2
Documentation/admin-guide/gpio/gpio-sim.rst | 2
Documentation/admin-guide/hw-vuln/mds.rst | 4
Documentation/admin-guide/kernel-parameters.txt | 8 -
Documentation/admin-guide/laptops/thinkpad-acpi.rst | 2
Documentation/admin-guide/md.rst | 2
Documentation/admin-guide/media/bttv.rst | 2
Documentation/admin-guide/media/building.rst | 2
Documentation/admin-guide/media/si476x.rst | 2
Documentation/admin-guide/media/vivid.rst | 2
Documentation/admin-guide/mm/hugetlbpage.rst | 2
Documentation/admin-guide/mm/numa_memory_policy.rst | 4
Documentation/admin-guide/perf/hns3-pmu.rst | 2
Documentation/admin-guide/pm/amd-pstate.rst | 2
Documentation/admin-guide/spkguide.txt | 4
Documentation/admin-guide/sysctl/vm.rst | 4
Documentation/admin-guide/sysrq.rst | 2
Documentation/driver-api/dma-buf.rst | 2
Documentation/driver-api/dmaengine/client.rst | 2
Documentation/driver-api/dmaengine/dmatest.rst | 2
Documentation/driver-api/hsi.rst | 4
Documentation/driver-api/io-mapping.rst | 4
Documentation/driver-api/md/md-cluster.rst | 2
Documentation/driver-api/md/raid5-cache.rst | 2
Documentation/driver-api/media/drivers/vidtv.rst | 2
Documentation/driver-api/media/dtv-demux.rst | 2
Documentation/driver-api/media/v4l2-subdev.rst | 4
Documentation/driver-api/mei/nfc.rst | 2
Documentation/driver-api/nfc/nfc-hci.rst | 2
Documentation/driver-api/nvdimm/nvdimm.rst | 2
Documentation/driver-api/nvdimm/security.rst | 2
Documentation/driver-api/pin-control.rst | 2
Documentation/driver-api/pldmfw/index.rst | 2
Documentation/driver-api/serial/driver.rst | 2
Documentation/driver-api/surface_aggregator/ssh.rst | 2
Documentation/driver-api/thermal/intel_powerclamp.rst | 2
Documentation/driver-api/usb/dwc3.rst | 2
Documentation/driver-api/usb/usb3-debug-port.rst | 2
Documentation/hwmon/aht10.rst | 2
Documentation/hwmon/aspeed-pwm-tacho.rst | 2
Documentation/hwmon/corsair-psu.rst | 2
Documentation/hwmon/gsc-hwmon.rst | 6 -
Documentation/hwmon/hwmon-kernel-api.rst | 4
Documentation/hwmon/ltc2978.rst | 2
Documentation/hwmon/max6697.rst | 2
Documentation/hwmon/menf21bmc.rst | 2
Documentation/hwmon/pmbus-core.rst | 2
Documentation/hwmon/sht4x.rst | 2
Documentation/hwmon/smm665.rst | 2
Documentation/hwmon/stpddc60.rst | 2
Documentation/hwmon/vexpress.rst | 2
Documentation/hwmon/via686a.rst | 2
Documentation/networking/af_xdp.rst | 4
Documentation/networking/arcnet-hardware.rst | 2
Documentation/networking/can.rst | 2
Documentation/networking/can_ucan_protocol.rst | 2
Documentation/networking/cdc_mbim.rst | 2
Documentation/networking/device_drivers/atm/iphase.rst | 2
Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst | 4
Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg | 4
Documentation/networking/device_drivers/ethernet/3com/vortex.rst | 2
Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst | 6 -
Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst | 2
Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst | 2
Documentation/networking/device_drivers/ethernet/pensando/ionic.rst | 2
Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst | 2
Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst | 2
Documentation/networking/device_drivers/wwan/iosm.rst | 2
Documentation/networking/devlink/ice.rst | 4
Documentation/networking/devlink/netdevsim.rst | 2
Documentation/networking/devlink/prestera.rst | 2
Documentation/networking/dsa/configuration.rst | 2
Documentation/networking/ethtool-netlink.rst | 6 -
Documentation/networking/gtp.rst | 2
Documentation/networking/ieee802154.rst | 2
Documentation/networking/ip-sysctl.rst | 6 -
Documentation/networking/ipvlan.rst | 2
Documentation/networking/j1939.rst | 2
Documentation/networking/net_failover.rst | 2
Documentation/networking/netconsole.rst | 2
Documentation/networking/page_pool.rst | 6 -
Documentation/networking/phonet.rst | 2
Documentation/networking/phy.rst | 2
Documentation/networking/regulatory.rst | 4
Documentation/networking/rxrpc.rst | 2
Documentation/networking/snmp_counter.rst | 4
Documentation/networking/sysfs-tagging.rst | 2
Documentation/scsi/ChangeLog.lpfc | 36 ++++----
Documentation/scsi/ChangeLog.megaraid | 8 -
Documentation/scsi/ChangeLog.megaraid_sas | 4
Documentation/scsi/ChangeLog.ncr53c8xx | 16 +--
Documentation/scsi/ChangeLog.sym53c8xx | 14 +--
Documentation/scsi/ChangeLog.sym53c8xx_2 | 10 +-
Documentation/scsi/ncr53c8xx.rst | 4
Documentation/scsi/sym53c8xx_2.rst | 2
Documentation/scsi/tcm_qla2xxx.rst | 2
Documentation/scsi/ufs.rst | 2
Documentation/sparc/adi.rst | 4
Documentation/sparc/oradax/dax-hv-api.txt | 44 +++++-----
Documentation/userspace-api/iommufd.rst | 2
Documentation/userspace-api/media/drivers/st-vgxy61.rst | 2
Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst | 2
Documentation/userspace-api/media/rc/rc-protos.rst | 2
Documentation/userspace-api/media/rc/rc-tables.rst | 2
Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst | 2
Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst | 2
Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst | 2
Documentation/userspace-api/media/v4l/hist-v4l2.rst | 4
Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst | 2
Documentation/userspace-api/media/v4l/vidioc-cropcap.rst | 2
Documentation/userspace-api/seccomp_filter.rst | 2
Documentation/userspace-api/sysfs-platform_profile.rst | 2
126 files changed, 232 insertions(+), 232 deletions(-)
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@redhat.com
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: nvdimm@lists.linux.dev
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: rcu@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: sparclinux@vger.kernel.org
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/9] Documentation: admin-guide: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-30 9:35 ` Mukesh Ojha
2023-01-29 23:10 ` [PATCH 2/9] Documentation: driver-api: " Randy Dunlap
` (10 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Tejun Heo, Zefan Li,
Johannes Weiner, cgroups, Alasdair Kergon, Mike Snitzer,
dm-devel, Mauro Carvalho Chehab, linux-media, linux-mm
Correct spelling problems for Documentation/admin-guide/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@redhat.com
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: linux-mm@kvack.org
---
Documentation/admin-guide/bcache.rst | 2 +-
Documentation/admin-guide/cgroup-v1/blkio-controller.rst | 2 +-
Documentation/admin-guide/cgroup-v2.rst | 10 +++++-----
Documentation/admin-guide/cifs/usage.rst | 4 ++--
Documentation/admin-guide/device-mapper/cache-policies.rst | 2 +-
Documentation/admin-guide/device-mapper/dm-ebs.rst | 2 +-
Documentation/admin-guide/device-mapper/dm-zoned.rst | 2 +-
Documentation/admin-guide/device-mapper/unstriped.rst | 10 +++++-----
Documentation/admin-guide/dynamic-debug-howto.rst | 2 +-
Documentation/admin-guide/gpio/gpio-sim.rst | 2 +-
Documentation/admin-guide/hw-vuln/mds.rst | 4 ++--
Documentation/admin-guide/kernel-parameters.txt | 8 ++++----
Documentation/admin-guide/laptops/thinkpad-acpi.rst | 2 +-
Documentation/admin-guide/md.rst | 2 +-
Documentation/admin-guide/media/bttv.rst | 2 +-
Documentation/admin-guide/media/building.rst | 2 +-
Documentation/admin-guide/media/si476x.rst | 2 +-
Documentation/admin-guide/media/vivid.rst | 2 +-
Documentation/admin-guide/mm/hugetlbpage.rst | 2 +-
Documentation/admin-guide/mm/numa_memory_policy.rst | 4 ++--
Documentation/admin-guide/perf/hns3-pmu.rst | 2 +-
Documentation/admin-guide/pm/amd-pstate.rst | 2 +-
Documentation/admin-guide/spkguide.txt | 4 ++--
Documentation/admin-guide/sysctl/vm.rst | 4 ++--
Documentation/admin-guide/sysrq.rst | 2 +-
25 files changed, 41 insertions(+), 41 deletions(-)
diff -- a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -624,7 +624,7 @@ and is an example of this type.
Limits
------
-A child can only consume upto the configured amount of the resource.
+A child can only consume up to the configured amount of the resource.
Limits can be over-committed - the sum of the limits of children can
exceed the amount of resource available to the parent.
@@ -642,11 +642,11 @@ on an IO device and is an example of thi
Protections
-----------
-A cgroup is protected upto the configured amount of the resource
+A cgroup is protected up to the configured amount of the resource
as long as the usages of all its ancestors are under their
protected levels. Protections can be hard guarantees or best effort
soft boundaries. Protections can also be over-committed in which case
-only upto the amount available to the parent is protected among
+only up to the amount available to the parent is protected among
children.
Protections are in the range [0, max] and defaults to 0, which is
@@ -1079,7 +1079,7 @@ All time durations are in microseconds.
$MAX $PERIOD
- which indicates that the group may consume upto $MAX in each
+ which indicates that the group may consume up to $MAX in each
$PERIOD duration. "max" for $MAX indicates no limit. If only
one number is written, $MAX is updated.
@@ -2289,7 +2289,7 @@ Cpuset Interface Files
For a valid partition root with the sibling cpu exclusivity
rule enabled, changes made to "cpuset.cpus" that violate the
exclusivity rule will invalidate the partition as well as its
- sibiling partitions with conflicting cpuset.cpus values. So
+ sibling partitions with conflicting cpuset.cpus values. So
care must be taking in changing "cpuset.cpus".
A valid non-root parent partition may distribute out all its CPUs
diff -- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -1488,7 +1488,7 @@ Example of command to set keyboard langu
Text corresponding to keyboard layout to be set in sysfs are: be(Belgian),
cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian),
fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan),
-nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden),
+nl(Dutch), nn(Norway), pl(Polish), pt(portuguese), sl(Slovenian), sv(Sweden),
tr(Turkey)
WWAN Antenna type
diff -- a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst
--- a/Documentation/admin-guide/md.rst
+++ b/Documentation/admin-guide/md.rst
@@ -317,7 +317,7 @@ All md devices contain:
suspended (not supported yet)
All IO requests will block. The array can be reconfigured.
- Writing this, if accepted, will block until array is quiessent
+ Writing this, if accepted, will block until array is quiescent
readonly
no resync can happen. no superblocks get written.
diff -- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
--- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
+++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
@@ -106,7 +106,7 @@ Proportional weight policy files
see Documentation/block/bfq-iosched.rst.
blkio.bfq.weight_device
- Specifes per cgroup per device weights, overriding the default group
+ Specifies per cgroup per device weights, overriding the default group
weight. For more details, see Documentation/block/bfq-iosched.rst.
Following is the format::
diff -- a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -403,7 +403,7 @@ Unit Tests for amd-pstate
* We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization.
-1. Test case decriptions
+1. Test case descriptions
1). Basic tests
diff -- a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt
--- a/Documentation/admin-guide/spkguide.txt
+++ b/Documentation/admin-guide/spkguide.txt
@@ -1105,8 +1105,8 @@ speakup load
Alternatively, you can add the above line to your file
~/.bashrc or ~/.bash_profile.
-If your system administrator ran himself the script, all the users will be able
-to change from English to the language choosed by root and do directly
+If your system administrator himself ran the script, all the users will be able
+to change from English to the language chosen by root and do directly
speakupconf load (or add this to the ~/.bashrc or
~/.bash_profile file). If there are several languages to handle, the
administrator (or every user) will have to run the first steps until speakupconf
diff -- a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst
--- a/Documentation/admin-guide/device-mapper/cache-policies.rst
+++ b/Documentation/admin-guide/device-mapper/cache-policies.rst
@@ -70,7 +70,7 @@ the entries (each hotspot block covers a
cache block).
All this means smq uses ~25bytes per cache block. Still a lot of
-memory, but a substantial improvement nontheless.
+memory, but a substantial improvement nonetheless.
Level balancing
^^^^^^^^^^^^^^^
diff -- a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst
--- a/Documentation/admin-guide/device-mapper/dm-ebs.rst
+++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst
@@ -31,7 +31,7 @@ Mandatory parameters:
Optional parameter:
- <underyling sectors>:
+ <underlying sectors>:
Number of sectors defining the logical block size of <dev path>.
2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB.
If not provided, the logical block size of <dev path> will be used.
diff -- a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst
--- a/Documentation/admin-guide/device-mapper/dm-zoned.rst
+++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst
@@ -46,7 +46,7 @@ just like conventional zones.
The zones of the device(s) are separated into 2 types:
1) Metadata zones: these are conventional zones used to store metadata.
-Metadata zones are not reported as useable capacity to the user.
+Metadata zones are not reported as usable capacity to the user.
2) Data zones: all remaining zones, the vast majority of which will be
sequential zones used exclusively to store user data. The conventional
diff -- a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst
--- a/Documentation/admin-guide/device-mapper/unstriped.rst
+++ b/Documentation/admin-guide/device-mapper/unstriped.rst
@@ -35,7 +35,7 @@ An example of undoing an existing dm-str
This small bash script will setup 4 loop devices and use the existing
striped target to combine the 4 devices into one. It then will use
-the unstriped target ontop of the striped device to access the
+the unstriped target on top of the striped device to access the
individual backing loop devices. We write data to the newly exposed
unstriped devices and verify the data written matches the correct
underlying device on the striped array::
@@ -110,8 +110,8 @@ to get a 92% reduction in read latency u
Example dmsetup usage
=====================
-unstriped ontop of Intel NVMe device that has 2 cores
------------------------------------------------------
+unstriped on top of Intel NVMe device that has 2 cores
+------------------------------------------------------
::
@@ -124,8 +124,8 @@ respectively::
/dev/mapper/nvmset0
/dev/mapper/nvmset1
-unstriped ontop of striped with 4 drives using 128K chunk size
---------------------------------------------------------------
+unstriped on top of striped with 4 drives using 128K chunk size
+---------------------------------------------------------------
::
diff -- a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst
--- a/Documentation/admin-guide/hw-vuln/mds.rst
+++ b/Documentation/admin-guide/hw-vuln/mds.rst
@@ -64,8 +64,8 @@ architecture section: :ref:`Documentatio
Attack scenarios
----------------
-Attacks against the MDS vulnerabilities can be mounted from malicious non
-priviledged user space applications running on hosts or guest. Malicious
+Attacks against the MDS vulnerabilities can be mounted from malicious non-
+privileged user space applications running on hosts or guest. Malicious
guest OSes can obviously mount attacks as well.
Contrary to other speculation based vulnerabilities the MDS vulnerability
diff -- a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -356,7 +356,7 @@ The lowmem_reserve_ratio is an array. Yo
But, these values are not used directly. The kernel calculates # of protection
pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+in /proc/zoneinfo like the following. (This is an example of x86-64 box).
Each zone has an array of protection pages like this::
Node 0, zone DMA
@@ -433,7 +433,7 @@ a 2bit error in a memory module) is dete
that cannot be handled by the kernel. In some cases (like the page
still having a valid copy on disk) the kernel will handle the failure
transparently without affecting any applications. But if there is
-no other uptodate copy of the data it will kill to prevent any data
+no other up-to-date copy of the data it will kill to prevent any data
corruptions from propagating.
1: Kill all processes that have the corrupted and not reloadable page mapped
diff -- a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
--- a/Documentation/admin-guide/bcache.rst
+++ b/Documentation/admin-guide/bcache.rst
@@ -204,7 +204,7 @@ For example::
This should present your unmodified backing device data in /dev/loop0
If your cache is in writethrough mode, then you can safely discard the
-cache device without loosing data.
+cache device without losing data.
E) Wiping a cache device
diff -- a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst
--- a/Documentation/admin-guide/sysrq.rst
+++ b/Documentation/admin-guide/sysrq.rst
@@ -138,7 +138,7 @@ Command Function
``v`` Forcefully restores framebuffer console
``v`` Causes ETM buffer dump [ARM-specific]
-``w`` Dumps tasks that are in uninterruptable (blocked) state.
+``w`` Dumps tasks that are in uninterruptible (blocked) state.
``x`` Used by xmon interface on ppc/powerpc platforms.
Show global PMU Registers on sparc64.
diff -- a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst
--- a/Documentation/admin-guide/cifs/usage.rst
+++ b/Documentation/admin-guide/cifs/usage.rst
@@ -399,7 +399,7 @@ A partial list of the supported mount op
sep
if first mount option (after the -o), overrides
the comma as the separator between the mount
- parms. e.g.::
+ parameters. e.g.::
-o user=myname,password=mypassword,domain=mydom
@@ -765,7 +765,7 @@ cifsFYI If set to non-zero value, addi
Some debugging statements are not compiled into the
cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the
kernel configuration. cifsFYI may be set to one or
- nore of the following flags (7 sets them all)::
+ more of the following flags (7 sets them all)::
+-----------------------------------------------+------+
| log cifs informational messages | 0x01 |
diff -- a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -330,7 +330,7 @@ Examples
// boot-args example, with newlines and comments for readability
Kernel command line: ...
- // see whats going on in dyndbg=value processing
+ // see what's going on in dyndbg=value processing
dynamic_debug.verbose=3
// enable pr_debugs in the btrfs module (can be builtin or loadable)
btrfs.dyndbg="+p"
diff -- a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
--- a/Documentation/admin-guide/mm/hugetlbpage.rst
+++ b/Documentation/admin-guide/mm/hugetlbpage.rst
@@ -86,7 +86,7 @@ by increasing or decreasing the value of
Note: When the feature of freeing unused vmemmap pages associated with each
hugetlb page is enabled, we can fail to free the huge pages triggered by
-the user when ths system is under memory pressure. Please try again later.
+the user when the system is under memory pressure. Please try again later.
Pages that are used as huge pages are reserved inside the kernel and cannot
be used for other purposes. Huge pages cannot be swapped out under
diff -- a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
--- a/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -246,7 +246,7 @@ MPOL_INTERLEAVED
interleaved system default policy works in this mode.
MPOL_PREFERRED_MANY
- This mode specifices that the allocation should be preferrably
+ This mode specifies that the allocation should be preferably
satisfied from the nodemask specified in the policy. If there is
a memory pressure on all nodes in the nodemask, the allocation
can fall back to all existing numa nodes. This is effectively
@@ -360,7 +360,7 @@ and NUMA nodes. "Usage" here means one
2) examination of the policy to determine the policy mode and associated node
or node lists, if any, for page allocation. This is considered a "hot
path". Note that for MPOL_BIND, the "usage" extends across the entire
- allocation process, which may sleep during page reclaimation, because the
+ allocation process, which may sleep during page reclamation, because the
BIND policy nodemask is used, by reference, to filter ineligible nodes.
We can avoid taking an extra reference during the usages listed above as
diff -- a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst
--- a/Documentation/admin-guide/gpio/gpio-sim.rst
+++ b/Documentation/admin-guide/gpio/gpio-sim.rst
@@ -123,7 +123,7 @@ Each simulated GPIO chip creates a separ
directory for each exposed line
(e.g. ``/sys/devices/platform/gpio-sim.X/gpiochipY/``). The name of each group
is of the form: ``'sim_gpioX'`` where X is the offset of the line. Inside each
-group there are two attibutes:
+group there are two attributes:
``pull`` - allows to read and set the current simulated pull setting for
every line, when writing the value must be one of: ``'pull-up'``,
diff -- a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -676,7 +676,7 @@
Sets the size of kernel per-numa memory area for
contiguous memory allocations. A value of 0 disables
per-numa CMA altogether. And If this option is not
- specificed, the default value is 0.
+ specified, the default value is 0.
With per-numa CMA enabled, DMA users on node nid will
first try to allocate buffer from the pernuma area
which is located in node nid, if the allocation fails,
@@ -946,7 +946,7 @@
driver code when a CPU writes to (or reads from) a
random memory location. Note that there exists a class
of memory corruptions problems caused by buggy H/W or
- F/W or by drivers badly programing DMA (basically when
+ F/W or by drivers badly programming DMA (basically when
memory is written at bus level and the CPU MMU is
bypassed) which are not detectable by
CONFIG_DEBUG_PAGEALLOC, hence this option will not help
@@ -1732,7 +1732,7 @@
boot-time allocation of gigantic hugepages is skipped.
hugetlb_free_vmemmap=
- [KNL] Reguires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
+ [KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
enabled.
Control if HugeTLB Vmemmap Optimization (HVO) is enabled.
Allows heavy hugetlb users to free up some more
@@ -3693,7 +3693,7 @@
implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
to be effective. This is useful on platforms where the
sleep(SH) or wfi(ARM,ARM64) instructions do not work
- correctly or when doing power measurements to evalute
+ correctly or when doing power measurements to evaluate
the impact of the sleep instructions. This is also
useful when using JTAG debugger.
diff -- a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst
--- a/Documentation/admin-guide/perf/hns3-pmu.rst
+++ b/Documentation/admin-guide/perf/hns3-pmu.rst
@@ -53,7 +53,7 @@ two events have same value of bits 0~15
event pair. And the bit 16 of config indicates getting counter 0 or
counter 1 of hardware event.
-After getting two values of event pair in usersapce, the formula of
+After getting two values of event pair in userspace, the formula of
computation to calculate real performance data is:::
counter 0 / counter 1
diff -- a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst
--- a/Documentation/admin-guide/media/bttv.rst
+++ b/Documentation/admin-guide/media/bttv.rst
@@ -909,7 +909,7 @@ DE hat diverse Treiber fuer diese Modell
- TVPhone98 (Bt878)
- AVerTV und TVCapture98 w/VCR (Bt 878)
- AVerTVStudio und TVPhone98 w/VCR (Bt878)
- - AVerTV GO Serie (Kein SVideo Input)
+ - AVerTV GO Series (Kein SVideo Input)
- AVerTV98 (BT-878 chip)
- AVerTV98 mit Fernbedienung (BT-878 chip)
- AVerTV/FM98 (BT-878 chip)
diff -- a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst
--- a/Documentation/admin-guide/media/building.rst
+++ b/Documentation/admin-guide/media/building.rst
@@ -137,7 +137,7 @@ The ``LIRC user interface`` option adds
from remote controllers.
The ``Support for eBPF programs attached to lirc devices`` option allows
-the usage of special programs (called eBPF) that would allow aplications
+the usage of special programs (called eBPF) that would allow applications
to add extra remote controller decoding functionality to the Linux Kernel.
The ``Remote controller decoders`` option allows selecting the
diff -- a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst
--- a/Documentation/admin-guide/media/si476x.rst
+++ b/Documentation/admin-guide/media/si476x.rst
@@ -142,7 +142,7 @@ The drivers exposes following files:
indicator
0x18 lassi Signed Low side adjacent Channel
Strength indicator
- 0x19 hassi ditto fpr High side
+ 0x19 hassi ditto for High side
0x20 mult Multipath indicator
0x21 dev Frequency deviation
0x24 assi Adjacent channel SSI
diff -- a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst
--- a/Documentation/admin-guide/media/vivid.rst
+++ b/Documentation/admin-guide/media/vivid.rst
@@ -580,7 +580,7 @@ Metadata Capture
----------------
The Metadata capture generates UVC format metadata. The PTS and SCR are
-transmitted based on the values set in vivid contols.
+transmitted based on the values set in vivid controls.
The Metadata device will only work for the Webcam input, it will give
back an error for all other inputs.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 2/9] Documentation: driver-api: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
2023-01-29 23:10 ` [PATCH 1/9] Documentation: admin-guide: correct spelling Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-30 19:11 ` Dan Williams
` (2 more replies)
2023-01-29 23:10 ` [PATCH 3/9] Documentation: hwmon: " Randy Dunlap
` (9 subsequent siblings)
11 siblings, 3 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Mauro Carvalho Chehab,
linux-media, Dan Williams, Vishal Verma, Dave Jiang, nvdimm,
Vinod Koul, dmaengine, Song Liu, linux-raid, Greg Kroah-Hartman,
linux-usb
Correct spelling problems for Documentation/driver-api/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: nvdimm@lists.linux.dev
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
Documentation/driver-api/dma-buf.rst | 2 +-
Documentation/driver-api/dmaengine/client.rst | 2 +-
Documentation/driver-api/dmaengine/dmatest.rst | 2 +-
Documentation/driver-api/hsi.rst | 4 ++--
Documentation/driver-api/io-mapping.rst | 4 ++--
Documentation/driver-api/md/md-cluster.rst | 2 +-
Documentation/driver-api/md/raid5-cache.rst | 2 +-
Documentation/driver-api/media/drivers/vidtv.rst | 2 +-
Documentation/driver-api/media/dtv-demux.rst | 2 +-
Documentation/driver-api/media/v4l2-subdev.rst | 4 ++--
Documentation/driver-api/mei/nfc.rst | 2 +-
Documentation/driver-api/nfc/nfc-hci.rst | 2 +-
Documentation/driver-api/nvdimm/nvdimm.rst | 2 +-
Documentation/driver-api/nvdimm/security.rst | 2 +-
Documentation/driver-api/pin-control.rst | 2 +-
Documentation/driver-api/pldmfw/index.rst | 2 +-
Documentation/driver-api/serial/driver.rst | 2 +-
Documentation/driver-api/surface_aggregator/ssh.rst | 2 +-
Documentation/driver-api/thermal/intel_powerclamp.rst | 2 +-
Documentation/driver-api/usb/dwc3.rst | 2 +-
Documentation/driver-api/usb/usb3-debug-port.rst | 2 +-
21 files changed, 24 insertions(+), 24 deletions(-)
diff -- a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
--- a/Documentation/driver-api/dma-buf.rst
+++ b/Documentation/driver-api/dma-buf.rst
@@ -264,7 +264,7 @@ through memory management dependencies w
randomly hangs workloads until the timeout kicks in. Workloads, which from
userspace's perspective, do not contain a deadlock. In such a mixed fencing
architecture there is no single entity with knowledge of all dependencies.
-Thefore preventing such deadlocks from within the kernel is not possible.
+Therefore preventing such deadlocks from within the kernel is not possible.
The only solution to avoid dependencies loops is by not allowing indefinite
fences in the kernel. This means:
diff -- a/Documentation/driver-api/hsi.rst b/Documentation/driver-api/hsi.rst
--- a/Documentation/driver-api/hsi.rst
+++ b/Documentation/driver-api/hsi.rst
@@ -4,7 +4,7 @@ High Speed Synchronous Serial Interface
Introduction
---------------
-High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
+High Speed Synchronous Interface (HSI) is a full duplex, low latency protocol,
that is optimized for die-level interconnect between an Application Processor
and a Baseband chipset. It has been specified by the MIPI alliance in 2003 and
implemented by multiple vendors since then.
@@ -52,7 +52,7 @@ hsi-char Device
------------------
Each port automatically registers a generic client driver called hsi_char,
-which provides a charecter device for userspace representing the HSI port.
+which provides a character device for userspace representing the HSI port.
It can be used to communicate via HSI from userspace. Userspace may
configure the hsi_char device using the following ioctl commands:
diff -- a/Documentation/driver-api/mei/nfc.rst b/Documentation/driver-api/mei/nfc.rst
--- a/Documentation/driver-api/mei/nfc.rst
+++ b/Documentation/driver-api/mei/nfc.rst
@@ -3,7 +3,7 @@
MEI NFC
-------
-Some Intel 8 and 9 Serieses chipsets supports NFC devices connected behind
+Some Intel 8 and 9 Series chipsets support NFC devices connected behind
the Intel Management Engine controller.
MEI client bus exposes the NFC chips as NFC phy devices and enables
binding with Microread and NXP PN544 NFC device driver from the Linux NFC
diff -- a/Documentation/driver-api/nfc/nfc-hci.rst b/Documentation/driver-api/nfc/nfc-hci.rst
--- a/Documentation/driver-api/nfc/nfc-hci.rst
+++ b/Documentation/driver-api/nfc/nfc-hci.rst
@@ -150,7 +150,7 @@ LLC
Communication between the CPU and the chip often requires some link layer
protocol. Those are isolated as modules managed by the HCI layer. There are
-currently two modules : nop (raw transfert) and shdlc.
+currently two modules : nop (raw transfer) and shdlc.
A new llc must implement the following functions::
struct nfc_llc_ops {
diff -- a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
--- a/Documentation/driver-api/serial/driver.rst
+++ b/Documentation/driver-api/serial/driver.rst
@@ -24,7 +24,7 @@ console support.
Console Support
---------------
-The serial core provides a few helper functions. This includes identifing
+The serial core provides a few helper functions. This includes identifying
the correct port structure (via uart_get_console()) and decoding command line
arguments (uart_parse_options()).
diff -- a/Documentation/driver-api/surface_aggregator/ssh.rst b/Documentation/driver-api/surface_aggregator/ssh.rst
--- a/Documentation/driver-api/surface_aggregator/ssh.rst
+++ b/Documentation/driver-api/surface_aggregator/ssh.rst
@@ -77,7 +77,7 @@ after the frame structure and before the
its own CRC (over all payload bytes). If the payload is not present (i.e.
the frame has ``LEN=0``), the CRC of the payload is still present and will
evaluate to ``0xffff``. The |LEN| field does not include any of the CRCs, it
-equals the number of bytes inbetween the CRC of the frame and the CRC of the
+equals the number of bytes between the CRC of the frame and the CRC of the
payload.
Additionally, the following fixed two-byte sequences are used:
diff -- a/Documentation/driver-api/nvdimm/nvdimm.rst b/Documentation/driver-api/nvdimm/nvdimm.rst
--- a/Documentation/driver-api/nvdimm/nvdimm.rst
+++ b/Documentation/driver-api/nvdimm/nvdimm.rst
@@ -82,7 +82,7 @@ LABEL:
Metadata stored on a DIMM device that partitions and identifies
(persistently names) capacity allocated to different PMEM namespaces. It
also indicates whether an address abstraction like a BTT is applied to
- the namepsace. Note that traditional partition tables, GPT/MBR, are
+ the namespace. Note that traditional partition tables, GPT/MBR, are
layered on top of a PMEM namespace, or an address abstraction like BTT
if present, but partition support is deprecated going forward.
diff -- a/Documentation/driver-api/nvdimm/security.rst b/Documentation/driver-api/nvdimm/security.rst
--- a/Documentation/driver-api/nvdimm/security.rst
+++ b/Documentation/driver-api/nvdimm/security.rst
@@ -83,7 +83,7 @@ passed in.
6. Freeze
---------
The freeze operation does not require any keys. The security config can be
-frozen by a user with root privelege.
+frozen by a user with root privilege.
7. Disable
----------
diff -- a/Documentation/driver-api/thermal/intel_powerclamp.rst b/Documentation/driver-api/thermal/intel_powerclamp.rst
--- a/Documentation/driver-api/thermal/intel_powerclamp.rst
+++ b/Documentation/driver-api/thermal/intel_powerclamp.rst
@@ -85,7 +85,7 @@ migrated, unless the CPU is taken offlin
belong to the offlined CPUs will be terminated immediately.
Running as SCHED_FIFO and relatively high priority, also allows such
-scheme to work for both preemptable and non-preemptable kernels.
+scheme to work for both preemptible and non-preemptible kernels.
Alignment of idle time around jiffies ensures scalability for HZ
values. This effect can be better visualized using a Perf timechart.
The following diagram shows the behavior of kernel thread
diff -- a/Documentation/driver-api/usb/dwc3.rst b/Documentation/driver-api/usb/dwc3.rst
--- a/Documentation/driver-api/usb/dwc3.rst
+++ b/Documentation/driver-api/usb/dwc3.rst
@@ -18,7 +18,7 @@ controller which can be configured in on
4. Hub configuration
Linux currently supports several versions of this controller. In all
-likelyhood, the version in your SoC is already supported. At the time
+likelihood, the version in your SoC is already supported. At the time
of this writing, known tested versions range from 2.02a to 3.10a. As a
rule of thumb, anything above 2.02a should work reliably well.
diff -- a/Documentation/driver-api/usb/usb3-debug-port.rst b/Documentation/driver-api/usb/usb3-debug-port.rst
--- a/Documentation/driver-api/usb/usb3-debug-port.rst
+++ b/Documentation/driver-api/usb/usb3-debug-port.rst
@@ -48,7 +48,7 @@ kernel boot parameter::
"earlyprintk=xdbc"
If there are multiple xHCI controllers in your system, you can
-append a host contoller index to this kernel parameter. This
+append a host controller index to this kernel parameter. This
index starts from 0.
Current design doesn't support DbC runtime suspend/resume. As
diff -- a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst
--- a/Documentation/driver-api/dmaengine/client.rst
+++ b/Documentation/driver-api/dmaengine/client.rst
@@ -175,7 +175,7 @@ The details of these operations are:
driver can ask for the pointer, maximum size and the currently used size of
the metadata and can directly update or read it.
- Becasue the DMA driver manages the memory area containing the metadata,
+ Because the DMA driver manages the memory area containing the metadata,
clients must make sure that they do not try to access or get the pointer
after their transfer completion callback has run for the descriptor.
If no completion callback has been defined for the transfer, then the
diff -- a/Documentation/driver-api/dmaengine/dmatest.rst b/Documentation/driver-api/dmaengine/dmatest.rst
--- a/Documentation/driver-api/dmaengine/dmatest.rst
+++ b/Documentation/driver-api/dmaengine/dmatest.rst
@@ -89,7 +89,7 @@ The following command returns the state
% cat /sys/module/dmatest/parameters/run
-To wait for test completion userpace can poll 'run' until it is false, or use
+To wait for test completion userspace can poll 'run' until it is false, or use
the wait parameter. Specifying 'wait=1' when loading the module causes module
initialization to pause until a test run has completed, while reading
/sys/module/dmatest/parameters/wait waits for any running test to complete
diff -- a/Documentation/driver-api/io-mapping.rst b/Documentation/driver-api/io-mapping.rst
--- a/Documentation/driver-api/io-mapping.rst
+++ b/Documentation/driver-api/io-mapping.rst
@@ -44,7 +44,7 @@ This _wc variant returns a write-combini
used with mappings created by io_mapping_create_wc()
Temporary mappings are only valid in the context of the caller. The mapping
-is not guaranteed to be globaly visible.
+is not guaranteed to be globally visible.
io_mapping_map_local_wc() has a side effect on X86 32bit as it disables
migration to make the mapping code work. No caller can rely on this side
@@ -78,7 +78,7 @@ variant, although this may be significan
unsigned long offset)
This works like io_mapping_map_atomic/local_wc() except it has no side
-effects and the pointer is globaly visible.
+effects and the pointer is globally visible.
The mappings are released with::
diff -- a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst
--- a/Documentation/driver-api/media/drivers/vidtv.rst
+++ b/Documentation/driver-api/media/drivers/vidtv.rst
@@ -28,7 +28,7 @@ Currently, it consists of:
takes parameters at initialization that will dictate how the simulation
behaves.
-- Code reponsible for encoding a valid MPEG Transport Stream, which is then
+- Code responsible for encoding a valid MPEG Transport Stream, which is then
passed to the bridge driver. This fake stream contains some hardcoded content.
For now, we have a single, audio-only channel containing a single MPEG
Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave.
diff -- a/Documentation/driver-api/media/dtv-demux.rst b/Documentation/driver-api/media/dtv-demux.rst
--- a/Documentation/driver-api/media/dtv-demux.rst
+++ b/Documentation/driver-api/media/dtv-demux.rst
@@ -24,7 +24,7 @@ unless this is fixed in the HW platform.
The demux kABI only controls front-ends regarding to their connections with
demuxes; the kABI used to set the other front-end parameters, such as
-tuning, are devined via the Digital TV Frontend kABI.
+tuning, are defined via the Digital TV Frontend kABI.
The functions that implement the abstract interface demux should be defined
static or module private and registered to the Demux core for external
diff -- a/Documentation/driver-api/pin-control.rst b/Documentation/driver-api/pin-control.rst
--- a/Documentation/driver-api/pin-control.rst
+++ b/Documentation/driver-api/pin-control.rst
@@ -836,7 +836,7 @@ hardware and shall be put into different
Depending on the exact HW register design, some functions exposed by the
GPIO subsystem may call into the pinctrl subsystem in order to
-co-ordinate register settings across HW modules. In particular, this may
+coordinate register settings across HW modules. In particular, this may
be needed for HW with separate GPIO and pin controller HW modules, where
e.g. GPIO direction is determined by a register in the pin controller HW
module rather than the GPIO HW module.
diff -- a/Documentation/driver-api/pldmfw/index.rst b/Documentation/driver-api/pldmfw/index.rst
--- a/Documentation/driver-api/pldmfw/index.rst
+++ b/Documentation/driver-api/pldmfw/index.rst
@@ -20,7 +20,7 @@ Overview of the ``pldmfw`` library
The ``pldmfw`` library is intended to be used by device drivers for
implementing device flash update based on firmware files following the PLDM
-firwmare file format.
+firmware file format.
It is implemented using an ops table that allows device drivers to provide
the underlying device specific functionality.
diff -- a/Documentation/driver-api/md/md-cluster.rst b/Documentation/driver-api/md/md-cluster.rst
--- a/Documentation/driver-api/md/md-cluster.rst
+++ b/Documentation/driver-api/md/md-cluster.rst
@@ -65,7 +65,7 @@ There are three groups of locks for mana
2.3 new-device management
-------------------------
- A single lock: "no-new-dev" is used to co-ordinate the addition of
+ A single lock: "no-new-dev" is used to coordinate the addition of
new devices - this must be synchronized across the array.
Normally all nodes hold a concurrent-read lock on this device.
diff -- a/Documentation/driver-api/md/raid5-cache.rst b/Documentation/driver-api/md/raid5-cache.rst
--- a/Documentation/driver-api/md/raid5-cache.rst
+++ b/Documentation/driver-api/md/raid5-cache.rst
@@ -81,7 +81,7 @@ The write-through and write-back cache u
is organized as a simple write log. The log consists of 'meta data' and 'data'
pairs. The meta data describes the data. It also includes checksum and sequence
ID for recovery identification. Data can be IO data and parity data. Data is
-checksumed too. The checksum is stored in the meta data ahead of the data. The
+checksummed too. The checksum is stored in the meta data ahead of the data. The
checksum is an optimization because MD can write meta and data freely without
worry about the order. MD superblock has a field pointed to the valid meta data
of log head.
diff -- a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst
--- a/Documentation/driver-api/media/v4l2-subdev.rst
+++ b/Documentation/driver-api/media/v4l2-subdev.rst
@@ -321,7 +321,7 @@ response to video node operations. This
hardware from applications. For complex devices, finer-grained control of the
device than what the video nodes offer may be required. In those cases, bridge
drivers that implement :ref:`the media controller API <media_controller>` may
-opt for making the subdevice operations directly accessible from userpace.
+opt for making the subdevice operations directly accessible from userspace.
Device nodes named ``v4l-subdev``\ *X* can be created in ``/dev`` to access
sub-devices directly. If a sub-device supports direct userspace configuration
@@ -574,7 +574,7 @@ issues with subdevice drivers that let t
as they expect to receive the appropriate state as a parameter. To help the
conversion of subdevice drivers to a managed active state without having to
convert all callers at the same time, an additional wrapper layer has been
-added to v4l2_subdev_call(), which handles the NULL case by geting and locking
+added to v4l2_subdev_call(), which handles the NULL case by getting and locking
the callee's active state with :c:func:`v4l2_subdev_lock_and_get_active_state()`,
and unlocking the state after the call.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 3/9] Documentation: hwmon: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
2023-01-29 23:10 ` [PATCH 1/9] Documentation: admin-guide: correct spelling Randy Dunlap
2023-01-29 23:10 ` [PATCH 2/9] Documentation: driver-api: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-30 0:39 ` Guenter Roeck
2023-01-29 23:10 ` [PATCH 4/9] Documentation: networking: " Randy Dunlap
` (8 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Jean Delvare,
Guenter Roeck, linux-hwmon
Correct spelling problems for Documentation/hwmon/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
---
Documentation/hwmon/aht10.rst | 2 +-
Documentation/hwmon/aspeed-pwm-tacho.rst | 2 +-
Documentation/hwmon/corsair-psu.rst | 2 +-
Documentation/hwmon/gsc-hwmon.rst | 6 +++---
Documentation/hwmon/hwmon-kernel-api.rst | 4 ++--
Documentation/hwmon/ltc2978.rst | 2 +-
Documentation/hwmon/max6697.rst | 2 +-
Documentation/hwmon/menf21bmc.rst | 2 +-
Documentation/hwmon/pmbus-core.rst | 2 +-
Documentation/hwmon/sht4x.rst | 2 +-
Documentation/hwmon/smm665.rst | 2 +-
Documentation/hwmon/stpddc60.rst | 2 +-
Documentation/hwmon/vexpress.rst | 2 +-
Documentation/hwmon/via686a.rst | 2 +-
14 files changed, 17 insertions(+), 17 deletions(-)
diff -- a/Documentation/hwmon/aspeed-pwm-tacho.rst b/Documentation/hwmon/aspeed-pwm-tacho.rst
--- a/Documentation/hwmon/aspeed-pwm-tacho.rst
+++ b/Documentation/hwmon/aspeed-pwm-tacho.rst
@@ -10,7 +10,7 @@ Authors:
Description:
------------
This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
-controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
+controller. The PWM controller supports up to 8 PWM outputs. The Fan tacho
controller supports up to 16 tachometer inputs.
The driver provides the following sensor accesses in sysfs:
diff -- a/Documentation/hwmon/gsc-hwmon.rst b/Documentation/hwmon/gsc-hwmon.rst
--- a/Documentation/hwmon/gsc-hwmon.rst
+++ b/Documentation/hwmon/gsc-hwmon.rst
@@ -31,7 +31,7 @@ Temperature Monitoring
Temperatures are measured with 12-bit or 10-bit resolution and are scaled
either internally or by the driver depending on the GSC version and firmware.
-The values returned by the driver reflect millidegree Celcius:
+The values returned by the driver reflect millidegree Celsius:
tempX_input Measured temperature.
tempX_label Name of temperature input.
@@ -41,8 +41,8 @@ PWM Output Control
------------------
The GSC features 1 PWM output that operates in automatic mode where the
-PWM value will be scalled depending on 6 temperature boundaries.
-The tempeature boundaries are read-write and in millidegree Celcius and the
+PWM value will be scaled depending on 6 temperature boundaries.
+The tempeature boundaries are read-write and in millidegree Celsius and the
read-only PWM values range from 0 (off) to 255 (full speed).
Fan speed will be set to minimum (off) when the temperature sensor reads
less than pwm1_auto_point1_temp and maximum when the temperature sensor
diff -- a/Documentation/hwmon/sht4x.rst b/Documentation/hwmon/sht4x.rst
--- a/Documentation/hwmon/sht4x.rst
+++ b/Documentation/hwmon/sht4x.rst
@@ -37,7 +37,7 @@ Sysfs entries
-------------
=============== ============================================
-temp1_input Measured temperature in millidegrees Celcius
+temp1_input Measured temperature in millidegrees Celsius
humidity1_input Measured humidity in %H
update_interval The minimum interval for polling the sensor,
in milliseconds. Writable. Must be at least
diff -- a/Documentation/hwmon/stpddc60.rst b/Documentation/hwmon/stpddc60.rst
--- a/Documentation/hwmon/stpddc60.rst
+++ b/Documentation/hwmon/stpddc60.rst
@@ -39,7 +39,7 @@ output voltage as a positive or negative
in 50mV steps. This means that the absolute values of the limits will change
when the commanded output voltage changes. Also, care should be taken when
writing to those limits since in the worst case the commanded output voltage
-could change at the same time as the limit is written to, wich will lead to
+could change at the same time as the limit is written to, which will lead to
unpredictable results.
diff -- a/Documentation/hwmon/smm665.rst b/Documentation/hwmon/smm665.rst
--- a/Documentation/hwmon/smm665.rst
+++ b/Documentation/hwmon/smm665.rst
@@ -180,7 +180,7 @@ in9_crit_alarm AIN1 critical alarm
in10_crit_alarm AIN2 critical alarm
temp1_input Chip temperature
-temp1_min Mimimum chip temperature
+temp1_min Minimum chip temperature
temp1_max Maximum chip temperature
temp1_crit Critical chip temperature
temp1_crit_alarm Temperature critical alarm
diff -- a/Documentation/hwmon/via686a.rst b/Documentation/hwmon/via686a.rst
--- a/Documentation/hwmon/via686a.rst
+++ b/Documentation/hwmon/via686a.rst
@@ -58,7 +58,7 @@ representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts.
An alarm is triggered if the voltage has crossed a programmable minimum
-or maximum limit. Voltages are internally scalled, so each voltage channel
+or maximum limit. Voltages are internally scaled, so each voltage channel
has a different resolution and range.
If an alarm triggers, it will remain triggered until the hardware register
diff -- a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst
--- a/Documentation/hwmon/aht10.rst
+++ b/Documentation/hwmon/aht10.rst
@@ -38,7 +38,7 @@ Sysfs entries
-------------
=============== ============================================
-temp1_input Measured temperature in millidegrees Celcius
+temp1_input Measured temperature in millidegrees Celsius
humidity1_input Measured humidity in %H
update_interval The minimum interval for polling the sensor,
in milliseconds. Writable. Must be at
diff -- a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst
--- a/Documentation/hwmon/corsair-psu.rst
+++ b/Documentation/hwmon/corsair-psu.rst
@@ -40,7 +40,7 @@ This driver implements the sysfs interfa
interface of the HXi and RMi series.
These power supplies provide access to a micro-controller with 2 attached
temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for
-power usage and 4 sensors for current levels and addtional non-sensor information
+power usage and 4 sensors for current levels and additional non-sensor information
like uptimes.
Sysfs entries
diff -- a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst
--- a/Documentation/hwmon/hwmon-kernel-api.rst
+++ b/Documentation/hwmon/hwmon-kernel-api.rst
@@ -57,7 +57,7 @@ register/unregister functions::
hwmon_device_register_with_groups registers a hardware monitoring device.
The first parameter of this function is a pointer to the parent device.
The name parameter is a pointer to the hwmon device name. The registration
-function wil create a name sysfs attribute pointing to this name.
+function will create a name sysfs attribute pointing to this name.
The drvdata parameter is the pointer to the local driver data.
hwmon_device_register_with_groups will attach this pointer to the newly
allocated hwmon device. The pointer can be retrieved by the driver using
@@ -360,7 +360,7 @@ functions is used.
The header file linux/hwmon-sysfs.h provides a number of useful macros to
declare and use hardware monitoring sysfs attributes.
-In many cases, you can use the exsting define DEVICE_ATTR or its variants
+In many cases, you can use the existing define DEVICE_ATTR or its variants
DEVICE_ATTR_{RW,RO,WO} to declare such attributes. This is feasible if an
attribute has no additional context. However, in many cases there will be
additional information such as a sensor index which will need to be passed
diff -- a/Documentation/hwmon/ltc2978.rst b/Documentation/hwmon/ltc2978.rst
--- a/Documentation/hwmon/ltc2978.rst
+++ b/Documentation/hwmon/ltc2978.rst
@@ -333,7 +333,7 @@ temp[N]_input Measured temperature.
- On LTC3883, temp1 reports an external temperature,
and temp2 reports the chip temperature.
-temp[N]_min Mimimum temperature.
+temp[N]_min Minimum temperature.
LTC2972, LTC2974, LCT2977, LTM2980, LTC2978,
LTC2979, and LTM2987 only.
diff -- a/Documentation/hwmon/max6697.rst b/Documentation/hwmon/max6697.rst
--- a/Documentation/hwmon/max6697.rst
+++ b/Documentation/hwmon/max6697.rst
@@ -73,7 +73,7 @@ Description
This driver implements support for several MAX6697 compatible temperature sensor
chips. The chips support one local temperature sensor plus four, six, or seven
remote temperature sensors. Remote temperature sensors are diode-connected
-thermal transitors, except for MAX6698 which supports three diode-connected
+thermal transistors, except for MAX6698 which supports three diode-connected
thermal transistors plus three thermistors in addition to the local temperature
sensor.
diff -- a/Documentation/hwmon/menf21bmc.rst b/Documentation/hwmon/menf21bmc.rst
--- a/Documentation/hwmon/menf21bmc.rst
+++ b/Documentation/hwmon/menf21bmc.rst
@@ -7,7 +7,7 @@ Supported chips:
Prefix: 'menf21bmc_hwmon'
- Adresses scanned: -
+ Addresses scanned: -
Author: Andreas Werner <andreas.werner@men.de>
diff -- a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst
--- a/Documentation/hwmon/pmbus-core.rst
+++ b/Documentation/hwmon/pmbus-core.rst
@@ -174,7 +174,7 @@ Read byte from page <page>, register <re
int (*read_word_data)(struct i2c_client *client, int page, int phase,
int reg);
-Read word from page <page>, phase <pase>, register <reg>. If the chip does not
+Read word from page <page>, phase <phase>, register <reg>. If the chip does not
support multiple phases, the phase parameter can be ignored. If the chip
supports multiple phases, a phase value of 0xff indicates all phases.
diff -- a/Documentation/hwmon/vexpress.rst b/Documentation/hwmon/vexpress.rst
--- a/Documentation/hwmon/vexpress.rst
+++ b/Documentation/hwmon/vexpress.rst
@@ -27,7 +27,7 @@ Versatile Express platform (http://www.a
reference & prototyping system for ARM Ltd. processors. It can be set up
from a wide range of boards, each of them containing (apart of the main
chip/FPGA) a number of microcontrollers responsible for platform
-configuration and control. Theses microcontrollers can also monitor the
+configuration and control. These microcontrollers can also monitor the
board and its environment by a number of internal and external sensors,
providing information about power lines voltages and currents, board
temperature and power usage. Some of them also calculate consumed energy
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 4/9] Documentation: networking: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (2 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 3/9] Documentation: hwmon: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-29 23:10 ` [PATCH 5/9] Documentation: RCU: " Randy Dunlap
` (7 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Jiri Pirko,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
netdev
Correct spelling problems for Documentation/networking/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
---
.../af_xdp.rst | 4 ++--
.../arcnet-hardware.rst | 2 +-
.../can.rst | 2 +-
.../can_ucan_protocol.rst | 2 +-
.../cdc_mbim.rst | 2 +-
.../device_drivers/atm/iphase.rst | 2 +-
.../device_drivers/can/ctu/ctucanfd-driver.rst | 4 ++--
.../device_drivers/can/ctu/fsm_txt_buffer_user.svg | 4 ++--
.../device_drivers/ethernet/3com/vortex.rst | 2 +-
.../device_drivers/ethernet/aquantia/atlantic.rst | 6 +++---
.../device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst | 2 +-
.../device_drivers/ethernet/marvell/octeontx2.rst | 2 +-
.../device_drivers/ethernet/pensando/ionic.rst | 2 +-
.../device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst | 2 +-
.../device_drivers/ethernet/ti/cpsw_switchdev.rst | 2 +-
.../device_drivers/wwan/iosm.rst | 2 +-
.../devlink/ice.rst | 4 ++--
.../devlink/netdevsim.rst | 2 +-
.../devlink/prestera.rst | 2 +-
.../dsa/configuration.rst | 2 +-
.../ethtool-netlink.rst | 6 +++---
.../gtp.rst | 2 +-
.../ieee802154.rst | 2 +-
.../ip-sysctl.rst | 6 +++---
.../ipvlan.rst | 2 +-
.../j1939.rst | 2 +-
.../net_failover.rst | 2 +-
.../netconsole.rst | 2 +-
.../page_pool.rst | 6 +++---
.../phonet.rst | 2 +-
.../phy.rst | 2 +-
.../regulatory.rst | 4 ++--
.../rxrpc.rst | 2 +-
.../snmp_counter.rst | 4 ++--
.../sysfs-tagging.rst | 2 +-
35 files changed, 49 insertions(+), 49 deletions(-)
diff -- a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst
--- a/Documentation/networking/devlink/ice.rst
+++ b/Documentation/networking/devlink/ice.rst
@@ -285,7 +285,7 @@ features are enabled after the hierarchy
changes are made.
This feature is also dependent on switchdev being enabled in the system.
-It's required bacause devlink-rate requires devlink-port objects to be
+It's required because devlink-rate requires devlink-port objects to be
present, and those objects are only created in switchdev mode.
If the driver is set to the switchdev mode, it will export internal
@@ -320,7 +320,7 @@ nodes and nodes with children also can't
* - ``tx_weight``
- allows for usage of Weighted Fair Queuing arbitration scheme among
siblings. This arbitration scheme can be used simultaneously with
- the strict priority. Range 1-200. Only relative values mater for
+ the strict priority. Range 1-200. Only relative values matter for
arbitration.
``tx_priority`` and ``tx_weight`` can be used simultaneously. In that case
diff -- a/Documentation/networking/devlink/netdevsim.rst b/Documentation/networking/devlink/netdevsim.rst
--- a/Documentation/networking/devlink/netdevsim.rst
+++ b/Documentation/networking/devlink/netdevsim.rst
@@ -95,5 +95,5 @@ Driver-specific Traps
* - ``fid_miss``
- ``exception``
- When a packet enters the device it is classified to a filtering
- indentifier (FID) based on the ingress port and VLAN. This trap is used
+ identifier (FID) based on the ingress port and VLAN. This trap is used
to trap packets for which a FID could not be found
diff -- a/Documentation/networking/devlink/prestera.rst b/Documentation/networking/devlink/prestera.rst
--- a/Documentation/networking/devlink/prestera.rst
+++ b/Documentation/networking/devlink/prestera.rst
@@ -138,4 +138,4 @@ Driver-specific Traps
- Drops packets with zero (0) IPV4 source address.
* - ``met_red``
- ``drop``
- - Drops non-conforming packets (dropped by Ingress policer, metering drop), e.g. packet rate exceeded configured bandwith.
+ - Drops non-conforming packets (dropped by Ingress policer, metering drop), e.g. packet rate exceeded configured bandwidth.
diff -- a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst
--- a/Documentation/networking/dsa/configuration.rst
+++ b/Documentation/networking/dsa/configuration.rst
@@ -5,7 +5,7 @@ DSA switch configuration from userspace
=======================================
The DSA switch configuration is not integrated into the main userspace
-network configuration suites by now and has to be performed manualy.
+network configuration suites by now and has to be performed manually.
.. _dsa-config-showcases:
diff -- a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -106,7 +106,7 @@ modifying a bitmap, the former changes t
value and preserves the rest; the latter sets the bits set in the bitmap and
clears the rest.
-Compact form: nested (bitset) atrribute contents:
+Compact form: nested (bitset) attribute contents:
============================ ====== ============================
``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list
@@ -783,7 +783,7 @@ Kernel response contents:
``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active
==================================== ====== ==========================
-Request constains only one bitset which can be either value/mask pair (request
+Request contains only one bitset which can be either value/mask pair (request
to change specific feature bits and leave the rest) or only a value (request
to set all features to specified set).
@@ -1823,7 +1823,7 @@ aPLCATransmitOpportunityTimer. The valid
When set, the optional ``ETHTOOL_A_PLCA_BURST_CNT`` attribute indicates the
configured number of extra packets that the node is allowed to send during a
single transmit opportunity. By default, this attribute is 0, meaning that
-the node can only send a sigle frame per TO. When greater than 0, the PLCA RS
+the node can only send a single frame per TO. When greater than 0, the PLCA RS
keeps the TO after any transmission, waiting for the MAC to send a new frame
for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA
cycle up to the value of this parameter. After that, the burst is over and the
diff -- a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -50,7 +50,7 @@ ip_no_pmtu_disc - INTEGER
Default: FALSE
min_pmtu - INTEGER
- default 552 - minimum Path MTU. Unless this is changed mannually,
+ default 552 - minimum Path MTU. Unless this is changed manually,
each cached pmtu will never be lower than this setting.
ip_forward_use_pmtu - BOOLEAN
@@ -2078,7 +2078,7 @@ skip_notify_on_dev_down - BOOLEAN
nexthop_compat_mode - BOOLEAN
New nexthop API provides a means for managing nexthops independent of
- prefixes. Backwards compatibilty with old route format is enabled by
+ prefixes. Backwards compatibility with old route format is enabled by
default which means route dumps and notifications contain the new
nexthop attribute but also the full, expanded nexthop definition.
Further, updates or deletes of a nexthop configuration generate route
@@ -2811,7 +2811,7 @@ pf_expose - INTEGER
can be got via SCTP_GET_PEER_ADDR_INFO sockopt; When it's enabled,
a SCTP_PEER_ADDR_CHANGE event will be sent for a transport becoming
SCTP_PF state and a SCTP_PF-state transport info can be got via
- SCTP_GET_PEER_ADDR_INFO sockopt; When it's diabled, no
+ SCTP_GET_PEER_ADDR_INFO sockopt; When it's disabled, no
SCTP_PEER_ADDR_CHANGE event will be sent and it returns -EACCES when
trying to get a SCTP_PF-state transport info via SCTP_GET_PEER_ADDR_INFO
sockopt.
diff -- a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst
--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -116,7 +116,7 @@ format, the Group Extension is set in th
----------------------------------------
23 ... 16 15 ... 8
============== ========================
- F0h ... FFh GE (Group Extenstion)
+ F0h ... FFh GE (Group Extension)
============== ========================
On the other hand, when using PDU1 format, the PS-field contains a so-called
diff -- a/Documentation/networking/phonet.rst b/Documentation/networking/phonet.rst
--- a/Documentation/networking/phonet.rst
+++ b/Documentation/networking/phonet.rst
@@ -131,7 +131,7 @@ Phonet resources, as follow::
Subscription is similarly cancelled using the SIOCPNDELRESOURCE I/O
control request, or when the socket is closed.
-Note that no more than one socket can be subcribed to any given
+Note that no more than one socket can be subscribed to any given
resource at a time. If not, ioctl() will return EBUSY.
diff -- a/Documentation/networking/regulatory.rst b/Documentation/networking/regulatory.rst
--- a/Documentation/networking/regulatory.rst
+++ b/Documentation/networking/regulatory.rst
@@ -66,7 +66,7 @@ An example::
iw reg set CR
This will request the kernel to set the regulatory domain to
-the specificied alpha2. The kernel in turn will then ask userspace
+the specified alpha2. The kernel in turn will then ask userspace
to provide a regulatory domain for the alpha2 specified by the user
by sending a uevent.
@@ -158,7 +158,7 @@ kmalloc() a structure big enough to hold
structure and you should then fill it with your data. Finally you simply
call regulatory_hint() with the regulatory domain structure in it.
-Bellow is a simple example, with a regulatory domain cached using the stack.
+Below is a simple example, with a regulatory domain cached using the stack.
Your implementation may vary (read EEPROM cache instead, for example).
Example cache of some regulatory domain::
diff -- a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst
--- a/Documentation/networking/af_xdp.rst
+++ b/Documentation/networking/af_xdp.rst
@@ -419,7 +419,7 @@ XDP_UMEM_REG setsockopt
-----------------------
This setsockopt registers a UMEM to a socket. This is the area that
-contain all the buffers that packet can recide in. The call takes a
+contain all the buffers that packet can reside in. The call takes a
pointer to the beginning of this area and the size of it. Moreover, it
also has parameter called chunk_size that is the size that the UMEM is
divided into. It can only be 2K or 4K at the moment. If you have an
@@ -592,7 +592,7 @@ A: When a netdev of a physical NIC is in
A number of other ways are possible all up to the capabilities of
the NIC you have.
-Q: Can I use the XSKMAP to implement a switch betwen different umems
+Q: Can I use the XSKMAP to implement a switch between different umems
in copy mode?
A: The short answer is no, that is not supported at the moment. The
diff -- a/Documentation/networking/arcnet-hardware.rst b/Documentation/networking/arcnet-hardware.rst
--- a/Documentation/networking/arcnet-hardware.rst
+++ b/Documentation/networking/arcnet-hardware.rst
@@ -1902,7 +1902,7 @@ of 32 possible I/O Base addresses using
6 | 10
The I/O address is sum of all switches set to "1". Remember that
-the I/O address space bellow 0x200 is RESERVED for mainboard, so
+the I/O address space below 0x200 is RESERVED for mainboard, so
switch 1 should be ALWAYS SET TO OFF.
diff -- a/Documentation/networking/can.rst b/Documentation/networking/can.rst
--- a/Documentation/networking/can.rst
+++ b/Documentation/networking/can.rst
@@ -931,7 +931,7 @@ ival1:
ival2:
Throttle the received message rate down to the value of ival2. This
is useful to reduce messages for the application when the signal inside the
- CAN frame is stateless as state changes within the ival2 periode may get
+ CAN frame is stateless as state changes within the ival2 period may get
lost.
Broadcast Manager Multiplex Message Receive Filter
diff -- a/Documentation/networking/can_ucan_protocol.rst b/Documentation/networking/can_ucan_protocol.rst
--- a/Documentation/networking/can_ucan_protocol.rst
+++ b/Documentation/networking/can_ucan_protocol.rst
@@ -50,7 +50,7 @@ Setup Packet
``wIndex`` USB Interface Index (0 for device commands)
``wLength`` * Host to Device - Number of bytes to transmit
* Device to Host - Maximum Number of bytes to
- receive. If the device send less. Commom ZLP
+ receive. If the device send less. Common ZLP
semantics are used.
================= =====================================================
diff -- a/Documentation/networking/cdc_mbim.rst b/Documentation/networking/cdc_mbim.rst
--- a/Documentation/networking/cdc_mbim.rst
+++ b/Documentation/networking/cdc_mbim.rst
@@ -93,7 +93,7 @@ MBIM function can be looked up using sys
USB configuration descriptors
-----------------------------
The wMaxControlMessage field of the CDC MBIM functional descriptor
-limits the maximum control message size. The managament application is
+limits the maximum control message size. The management application is
responsible for negotiating a control message size complying with the
requirements in section 9.3.1 of [1], taking this descriptor field
into consideration.
diff -- a/Documentation/networking/gtp.rst b/Documentation/networking/gtp.rst
--- a/Documentation/networking/gtp.rst
+++ b/Documentation/networking/gtp.rst
@@ -162,7 +162,7 @@ Local GTP-U entity and tunnel identifica
GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152
for GTPv1-U and 3386 for GTPv0-U.
-There is only one GTP-U entity (and therefor SGSN/GGSN/S-GW/PDN-GW
+There is only one GTP-U entity (and therefore SGSN/GGSN/S-GW/PDN-GW
instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique
per GTP-U entity.
diff -- a/Documentation/networking/ieee802154.rst b/Documentation/networking/ieee802154.rst
--- a/Documentation/networking/ieee802154.rst
+++ b/Documentation/networking/ieee802154.rst
@@ -70,7 +70,7 @@ Like with WiFi, there are several types
exports a management (e.g. MLME) and data API.
2) 'SoftMAC' or just radio. These types of devices are just radio transceivers
possibly with some kinds of acceleration like automatic CRC computation and
-comparation, automagic ACK handling, address matching, etc.
+comparison, automagic ACK handling, address matching, etc.
Those types of devices require different approach to be hooked into Linux kernel.
diff -- a/Documentation/networking/ipvlan.rst b/Documentation/networking/ipvlan.rst
--- a/Documentation/networking/ipvlan.rst
+++ b/Documentation/networking/ipvlan.rst
@@ -61,7 +61,7 @@ e.g.
IPvlan has two modes of operation - L2 and L3. For a given master device,
you can select one of these two modes and all slaves on that master will
operate in the same (selected) mode. The RX mode is almost identical except
-that in L3 mode the slaves wont receive any multicast / broadcast traffic.
+that in L3 mode the slaves won't receive any multicast / broadcast traffic.
L3 mode is more restrictive since routing is controlled from the other (mostly)
default namespace.
diff -- a/Documentation/networking/netconsole.rst b/Documentation/networking/netconsole.rst
--- a/Documentation/networking/netconsole.rst
+++ b/Documentation/networking/netconsole.rst
@@ -167,7 +167,7 @@ following format which is the same as /d
Non printable characters in <message text> are escaped using "\xff"
notation. If the message contains optional dictionary, verbatim
-newline is used as the delimeter.
+newline is used as the delimiter.
If a message doesn't fit in certain number of bytes (currently 1000),
the message is split into multiple fragments by netconsole. These
diff -- a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst
--- a/Documentation/networking/net_failover.rst
+++ b/Documentation/networking/net_failover.rst
@@ -90,7 +90,7 @@ virtio-net interface, and ens11 is the s
One point to note here is that some user space network configuration daemons
like systemd-networkd, ifupdown, etc, do not understand the 'net_failover'
device; and on the first boot, the VM might end up with both 'failover' device
-and VF accquiring IP addresses (either same or different) from the DHCP server.
+and VF acquiring IP addresses (either same or different) from the DHCP server.
This will result in lack of connectivity to the VM. So some tweaks might be
needed to these network configuration daemons to make sure that an IP is
received only on the 'failover' device.
diff -- a/Documentation/networking/page_pool.rst b/Documentation/networking/page_pool.rst
--- a/Documentation/networking/page_pool.rst
+++ b/Documentation/networking/page_pool.rst
@@ -11,7 +11,7 @@ Basic use involves replacing alloc_pages
page_pool_alloc_pages() call. Drivers should use page_pool_dev_alloc_pages()
replacing dev_alloc_pages().
-API keeps track of inflight pages, in order to let API user know
+API keeps track of in-flight pages, in order to let API user know
when it is safe to free a page_pool object. Thus, API users
must run page_pool_release_page() when a page is leaving the page_pool or
call page_pool_put_page() where appropriate in order to maintain correct
@@ -19,7 +19,7 @@ accounting.
API user must call page_pool_put_page() once on a page, as it
will either recycle the page, or in case of refcnt > 1, it will
-release the DMA mapping and inflight state accounting.
+release the DMA mapping and in-flight state accounting.
Architecture overview
=====================
@@ -88,7 +88,7 @@ a page will cause no race conditions is
directly into the pool fast cache.
* page_pool_release_page(): Unmap the page (if mapped) and account for it on
- inflight counters.
+ in-flight counters.
* page_pool_dev_alloc_pages(): Get a page from the page allocator or page_pool
caches.
diff -- a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -315,7 +315,7 @@ Some of the interface modes are describe
only the port id, but also so-called "extensions". The only documented
extension so-far in the specification is the inclusion of timestamps, for
PTP-enabled PHYs. This mode isn't compatible with QSGMII, but offers the
- same capabilities in terms of link speed and negociation.
+ same capabilities in terms of link speed and negotiation.
``PHY_INTERFACE_MODE_1000BASEKX``
This is 1000BASE-X as defined by IEEE 802.3 Clause 36 with Clause 73
diff -- a/Documentation/networking/rxrpc.rst b/Documentation/networking/rxrpc.rst
--- a/Documentation/networking/rxrpc.rst
+++ b/Documentation/networking/rxrpc.rst
@@ -1069,7 +1069,7 @@ The kernel interface functions are as fo
This value can be used to determine if the remote client has been
restarted as it shouldn't change otherwise.
- (#) Set the maxmimum lifespan on a call::
+ (#) Set the maximum lifespan on a call::
void rxrpc_kernel_set_max_life(struct socket *sock,
struct rxrpc_call *call,
diff -- a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst
--- a/Documentation/networking/snmp_counter.rst
+++ b/Documentation/networking/snmp_counter.rst
@@ -980,7 +980,7 @@ How many reply packets of the SYN cookie
The MSS decoded from the SYN cookie is invalid. When this counter is
updated, the received packet won't be treated as a SYN cookie and the
-TcpExtSyncookiesRecv counter wont be updated.
+TcpExtSyncookiesRecv counter won't be updated.
Challenge ACK
=============
@@ -1681,7 +1681,7 @@ RST to nstat-b::
nstatuser@nstat-a:~$ sudo iptables -A INPUT -p tcp --sport 9000 -j DROP
-Send 3 SYN repeatly to nstat-b::
+Send 3 SYN repeatedly to nstat-b::
nstatuser@nstat-a:~$ for i in {1..3}; do sudo tcpreplay -i ens3 /tmp/syn_fixcsum.pcap; done
diff -- a/Documentation/networking/sysfs-tagging.rst b/Documentation/networking/sysfs-tagging.rst
--- a/Documentation/networking/sysfs-tagging.rst
+++ b/Documentation/networking/sysfs-tagging.rst
@@ -43,6 +43,6 @@ Users of this interface:
- current_ns() which returns current's namespace
- netlink_ns() which returns a socket's namespace
- - initial_ns() which returns the initial namesapce
+ - initial_ns() which returns the initial namespace
- call kobj_ns_exit() when an individual tag is no longer valid
diff -- a/Documentation/networking/device_drivers/atm/iphase.rst b/Documentation/networking/device_drivers/atm/iphase.rst
--- a/Documentation/networking/device_drivers/atm/iphase.rst
+++ b/Documentation/networking/device_drivers/atm/iphase.rst
@@ -4,7 +4,7 @@
ATM (i)Chip IA Linux Driver Source
==================================
- READ ME FISRT
+ READ ME FIRST
--------------------------------------------------------------------------------
diff -- a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst
--- a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst
+++ b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst
@@ -577,7 +577,7 @@ CTU CAN FD IP Core and Driver Developmen
* Linux driver development
* continuous integration platform architect and GHDL updates
- * theses `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_
+ * thesis `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_
* Jiri Novak <jnovak@fel.cvut.cz>
@@ -603,7 +603,7 @@ CTU CAN FD IP Core and Driver Developmen
* Jan Charvat
* implemented CTU CAN FD functional model for QEMU which has been integrated into QEMU mainline (`docs/system/devices/can.rst <https://www.qemu.org/docs/master/system/devices/can.html>`_)
- * Bachelor theses Model of CAN FD Communication Controller for QEMU Emulator
+ * Bachelor thesis Model of CAN FD Communication Controller for QEMU Emulator
Notes
-----
diff -- a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg
--- a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg
+++ b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg
@@ -129,10 +129,10 @@
</g>
</g>
<text transform="matrix(.264583 0 0 .264583 91.8919 139.964)" x="26.959213" y="9.11724" fill="#2aa1ff" filter="url(#filter1204-6-2-9-1-3-1)" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="26.959213" y="9.11724" text-align="center">Set</tspan><tspan x="26.959213" y="22.31724" text-align="center">abort</tspan></text>
- <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccesfull</tspan></text>
+ <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccessful</tspan></text>
<g font-size="12px" stroke-width="3.77953" text-anchor="middle">
<text transform="matrix(.264583 0 0 .264583 68.5988 118.913)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">starts</tspan></text>
- <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">succesfull</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">successful</tspan></text>
<text transform="matrix(.264583 0 0 .264583 107.77 145.476)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">sborted</tspan></text>
</g>
<g stroke-width="3.77953" text-anchor="middle">
diff -- a/Documentation/networking/device_drivers/wwan/iosm.rst b/Documentation/networking/device_drivers/wwan/iosm.rst
--- a/Documentation/networking/device_drivers/wwan/iosm.rst
+++ b/Documentation/networking/device_drivers/wwan/iosm.rst
@@ -69,7 +69,7 @@ wwan0-X network device
The IOSM driver exposes IP link interface "wwan0-X" of type "wwan" for IP
traffic. Iproute network utility is used for creating "wwan0-X" network
interface and for associating it with MBIM IP session. The Driver supports
-upto 8 IP sessions for simultaneous IP communication.
+up to 8 IP sessions for simultaneous IP communication.
The userspace management application is responsible for creating new IP link
prior to establishing MBIM IP session where the SessionId is greater than 0.
diff -- a/Documentation/networking/device_drivers/ethernet/3com/vortex.rst b/Documentation/networking/device_drivers/ethernet/3com/vortex.rst
--- a/Documentation/networking/device_drivers/ethernet/3com/vortex.rst
+++ b/Documentation/networking/device_drivers/ethernet/3com/vortex.rst
@@ -254,7 +254,7 @@ Media selection
A number of the older NICs such as the 3c590 and 3c900 series have
10base2 and AUI interfaces.
-Prior to January, 2001 this driver would autoeselect the 10base2 or AUI
+Prior to January, 2001 this driver would autoselect the 10base2 or AUI
port if it didn't detect activity on the 10baseT port. It would then
get stuck on the 10base2 port and a driver reload was necessary to
switch back to 10baseT. This behaviour could not be prevented with a
diff -- a/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst b/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
--- a/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
+++ b/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
@@ -270,7 +270,7 @@ RX flow rules (ntuple filters)
ethtool -K ethX ntuple <on|off>
- When disabling ntuple filters, all the user programed filters are
+ When disabling ntuple filters, all the user programmed filters are
flushed from the driver cache and hardware. All needed filters must
be re-added when ntuple is re-enabled.
@@ -418,7 +418,7 @@ Default value: 0xFFFF
0 Disable interrupt throttling.
1 Enable interrupt throttling and use specified tx and rx rates.
0xFFFF Auto throttling mode. Driver will choose the best RX and TX
- interrupt throtting settings based on link speed.
+ interrupt throttling settings based on link speed.
====== ==============================================================
aq_itr_tx - TX interrupt throttle rate
@@ -456,7 +456,7 @@ AQ_CFG_RX_PAGEORDER
Default value: 0
-RX page order override. Thats a power of 2 number of RX pages allocated for
+RX page order override. That's a power of 2 number of RX pages allocated for
each descriptor. Received descriptor size is still limited by
AQ_CFG_RX_FRAME_MAX.
diff -- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
@@ -11,7 +11,7 @@ Overview
--------
The DPAA2 MAC / PHY support consists of a set of APIs that help DPAA2 network
-drivers (dpaa2-eth, dpaa2-ethsw) interract with the PHY library.
+drivers (dpaa2-eth, dpaa2-ethsw) interact with the PHY library.
DPAA2 Software Architecture
---------------------------
diff -- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
--- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
+++ b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
@@ -127,7 +127,7 @@ Type1:
Type2:
- RVU PF0 ie admin function creates these VFs and maps them to loopback block's channels.
- A set of two VFs (VF0 & VF1, VF2 & VF3 .. so on) works as a pair ie pkts sent out of
- VF0 will be received by VF1 and viceversa.
+ VF0 will be received by VF1 and vice versa.
- These VFs can be used by applications or virtual machines to communicate between them
without sending traffic outside. There is no switch present in HW, hence the support
for loopback VFs.
diff -- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
--- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
+++ b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
@@ -83,7 +83,7 @@ Configuring the Driver
MTU
---
-Jumbo frame support is available with a maximim size of 9194 bytes.
+Jumbo frame support is available with a maximum size of 9194 bytes.
Interrupt coalescing
--------------------
diff -- a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
--- a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
@@ -124,7 +124,7 @@ Multicast flooding
==================
CPU port mcast_flooding is always on
-Turning flooding on/off on swithch ports:
+Turning flooding on/off on switch ports:
bridge link set dev sw0p1 mcast_flood on/off
Access and Trunk port
diff -- a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
--- a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
@@ -174,7 +174,7 @@ Multicast flooding
==================
CPU port mcast_flooding is always on
-Turning flooding on/off on swithch ports:
+Turning flooding on/off on switch ports:
bridge link set dev sw0p1 mcast_flood on/off
Access and Trunk port
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 5/9] Documentation: RCU: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (3 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 4/9] Documentation: networking: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-30 5:24 ` Paul E. McKenney
2023-01-29 23:10 ` [PATCH 6/9] Documentation: scsi/ChangeLog*: " Randy Dunlap
` (6 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Paul E. McKenney,
Frederic Weisbecker, Neeraj Upadhyay, Josh Triplett, rcu
Correct spelling problems for Documentation/RCU/ as reported
by codespell.
Note: in RTFP.txt, there are other misspellings that are left as is
since they were used that way in email Subject: lines or in LWN.net
articles. [preemptable, Preemptable, synchonisation]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: rcu@vger.kernel.org
---
.../Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst | 6 +++---
.../Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst | 2 +-
.../RTFP.txt | 10 +++++-----
.../UP.rst | 4 ++--
.../lockdep.rst | 2 +-
.../torture.rst | 4 ++--
6 files changed, 14 insertions(+), 14 deletions(-)
diff -- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
@@ -277,7 +277,7 @@ the following access functions:
Again, only one request in a given batch need actually carry out a
grace-period operation, which means there must be an efficient way to
-identify which of many concurrent reqeusts will initiate the grace
+identify which of many concurrent requests will initiate the grace
period, and that there be an efficient way for the remaining requests to
wait for that grace period to complete. However, that is the topic of
the next section.
@@ -405,7 +405,7 @@ Use of Workqueues
In earlier implementations, the task requesting the expedited grace
period also drove it to completion. This straightforward approach had
the disadvantage of needing to account for POSIX signals sent to user
-tasks, so more recent implemementations use the Linux kernel's
+tasks, so more recent implementations use the Linux kernel's
workqueues (see Documentation/core-api/workqueue.rst).
The requesting task still does counter snapshotting and funnel-lock
@@ -465,7 +465,7 @@ corresponding disadvantage that workqueu
initialized, which does not happen until some time after the scheduler
spawns the first task. Given that there are parts of the kernel that
really do want to execute grace periods during this mid-boot “dead
-zone”, expedited grace periods must do something else during thie time.
+zone”, expedited grace periods must do something else during this time.
What they do is to fall back to the old practice of requiring that the
requesting task drive the expedited grace period, as was the case before
diff -- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
--- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
+++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
@@ -168,7 +168,7 @@ an ``atomic_add_return()`` of zero) to d
+-----------------------------------------------------------------------+
The approach must be extended to handle one final case, that of waking a
-task blocked in ``synchronize_rcu()``. This task might be affinitied to
+task blocked in ``synchronize_rcu()``. This task might be affined to
a CPU that is not yet aware that the grace period has ended, and thus
might not yet be subject to the grace period's memory ordering.
Therefore, there is an ``smp_mb()`` after the return from
diff -- a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst
--- a/Documentation/RCU/lockdep.rst
+++ b/Documentation/RCU/lockdep.rst
@@ -65,7 +65,7 @@ checking of rcu_dereference() primitives
rcu_access_pointer(p):
Return the value of the pointer and omit all barriers,
but retain the compiler constraints that prevent duplicating
- or coalescsing. This is useful when testing the
+ or coalescing. This is useful when testing the
value of the pointer itself, for example, against NULL.
The rcu_dereference_check() check expression can be any boolean
diff -- a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -201,7 +201,7 @@ work looked at debugging uses of RCU [Se
In 2012, Josh Triplett received his Ph.D. with his dissertation
covering RCU-protected resizable hash tables and the relationship
between memory barriers and read-side traversal order: If the updater
-is making changes in the opposite direction from the read-side traveral
+is making changes in the opposite direction from the read-side traversal
order, the updater need only execute a memory-barrier instruction,
but if in the same direction, the updater needs to wait for a grace
period between the individual updates [JoshTriplettPhD]. Also in 2012,
@@ -1245,7 +1245,7 @@ Oregon Health and Sciences University"
[Viewed September 5, 2005]"
,annotation={
First posting showing how RCU can be safely adapted for
- preemptable RCU read side critical sections.
+ preemptible RCU read side critical sections.
}
}
@@ -1888,7 +1888,7 @@ Revised:
\url{https://lore.kernel.org/r/20070910183004.GA3299@linux.vnet.ibm.com}
[Viewed October 25, 2007]"
,annotation={
- Final patch for preemptable RCU to -rt. (Later patches were
+ Final patch for preemptible RCU to -rt. (Later patches were
to mainline, eventually incorporated.)
}
}
@@ -2275,7 +2275,7 @@ lot of {Linux} into your technology!!!"
\url{https://lore.kernel.org/r/20090724001429.GA17374@linux.vnet.ibm.com}
[Viewed August 15, 2009]"
,annotation={
- First posting of simple and fast preemptable RCU.
+ First posting of simple and fast preemptible RCU.
}
}
@@ -2639,7 +2639,7 @@ lot of {Linux} into your technology!!!"
RCU-protected hash tables, barriers vs. read-side traversal order.
.
If the updater is making changes in the opposite direction from
- the read-side traveral order, the updater need only execute a
+ the read-side traversal order, the updater need only execute a
memory-barrier instruction, but if in the same direction, the
updater needs to wait for a grace period between the individual
updates.
diff -- a/Documentation/RCU/torture.rst b/Documentation/RCU/torture.rst
--- a/Documentation/RCU/torture.rst
+++ b/Documentation/RCU/torture.rst
@@ -216,7 +216,7 @@ Kernel boot arguments can also be suppli
rcutorture's module parameters. For example, to test a change to RCU's
CPU stall-warning code, use "--bootargs 'rcutorture.stall_cpu=30'".
This will of course result in the scripting reporting a failure, namely
-the resuling RCU CPU stall warning. As noted above, reducing memory may
+the resulting RCU CPU stall warning. As noted above, reducing memory may
require disabling rcutorture's callback-flooding tests::
kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
@@ -370,5 +370,5 @@ You can also re-run a previous remote ru
tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28-remote \
--duration 24h
-In this case, most of the kvm-again.sh parmeters may be supplied following
+In this case, most of the kvm-again.sh parameters may be supplied following
the pathname of the old run-results directory.
diff -- a/Documentation/RCU/UP.rst b/Documentation/RCU/UP.rst
--- a/Documentation/RCU/UP.rst
+++ b/Documentation/RCU/UP.rst
@@ -107,7 +107,7 @@ UP systems, including PREEMPT SMP builds
Quick Quiz #3:
Why can't synchronize_rcu() return immediately on UP systems running
- preemptable RCU?
+ preemptible RCU?
.. _answer_quick_quiz_up:
@@ -143,7 +143,7 @@ Answer to Quick Quiz #2:
Answer to Quick Quiz #3:
Why can't synchronize_rcu() return immediately on UP systems
- running preemptable RCU?
+ running preemptible RCU?
Because some other task might have been preempted in the middle
of an RCU read-side critical section. If synchronize_rcu()
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (4 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 5/9] Documentation: RCU: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-29 23:10 ` [PATCH 7/9] Documentation: scsi: " Randy Dunlap
` (5 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, James E.J. Bottomley,
Martin K. Petersen, linux-scsi
Correct spelling problems for Documentation/scsi/ ChangeLogs
as reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
---
Documentation/scsi/ChangeLog.lpfc | 36 ++++++++++----------
Documentation/scsi/ChangeLog.megaraid | 8 ++--
Documentation/scsi/ChangeLog.megaraid_sas | 4 +-
Documentation/scsi/ChangeLog.ncr53c8xx | 16 ++++----
Documentation/scsi/ChangeLog.sym53c8xx | 14 +++----
Documentation/scsi/ChangeLog.sym53c8xx_2 | 10 ++---
6 files changed, 44 insertions(+), 44 deletions(-)
diff -- a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -174,7 +174,7 @@ Changes from 20050201 to 20050208
lpfc_sli_chipset_init static.
* Cleaned up references to list_head->next field in the driver.
* Replaced lpfc_discq_post_event with lpfc_workq_post_event.
- * Implmented Christoph Hellwig's review from 2/5: Check for return
+ * Implemented Christoph Hellwig's review from 2/5: Check for return
values of kmalloc.
* Integrated Christoph Hellwig's patch from 1/30: Protecting
scan_tmo and friends in !FC_TRANSPORT_PATCHES_V2 &&
@@ -182,7 +182,7 @@ Changes from 20050201 to 20050208
* Integrated Christoph Hellwig's patch from 1/30: Some fixes in
the evt handling area.
* Integrated Christoph Hellwig's patch from 1/30: Remove usage of
- intr_inited variable. The interrupt initilization from OS side
+ intr_inited variable. The interrupt initialization from OS side
now happens in lpfc_probe_one().
* Integrated Christoph Hellwig's patch from 1/30: remove shim
lpfc_alloc_transport_attr - remove shim lpfc_alloc_shost_attrs -
@@ -389,7 +389,7 @@ Changes from 20041220 to 20041229
moved to kthread. kthread_stop() is not able to wake up thread
waiting on a semaphore and "modprobe -r lpfc" is not always
(most of the times) able to complete. Fix is in not using
- semaphore for the interruptable sleep.
+ semaphore for the interruptible sleep.
* Small Makefile cleanup - Remove remnants of 2.4 vs. 2.6
determination.
@@ -439,8 +439,8 @@ Changes from 20041207 to 20041213
hardware actually found).
* Integrate Christoph Hellwig's patch for 8.0.14: Add missing
__iomem annotations, remove broken casts, mark functions static.
- Only major changes is chaning of some offsets from word-based to
- byte-based so we cans simply do void pointer arithmetics (gcc
+ Only major changes is changing of some offsets from word-based to
+ byte-based so we can simply do void pointer arithmetic (gcc
extension) instead of casting to uint32_t.
* Integrate Christoph Hellwig's patch for 8.0.14: flag is always
LPFC_SLI_ABORT_IMED, aka 0 - remove dead code.
@@ -515,7 +515,7 @@ Changes from 20041018 to 20041123
a result of removing from the txcmpl list item which was already
removed (100100 is a LIST_POISON1 value from the next pointer
and 8 is an offset of the "prev") Driver runs out of iotags and
- does not handle that case well. The root of the proble is in the
+ does not handle that case well. The root of the problem is in the
initialization code in lpfc_sli.c
* Changes to work with proposed linux kernel patch to support
hotplug.
@@ -570,8 +570,8 @@ Changes from 20041018 to 20041123
associated I/Os to complete before returning.
* Fix memset byte count in lpfc_hba_init so that
LP1050 would initialize correctly.
- * Backround nodev_timeout processing to DPC This enables us to
- unblock (stop dev_loss_tmo) when appopriate.
+ * Background nodev_timeout processing to DPC. This enables us to
+ unblock (stop dev_loss_tmo) when appropriate.
* Fix array discovery with multiple luns. The max_luns was 0 at
the time the host structure was initialized. lpfc_cfg_params
then set the max_luns to the correct value afterwards.
@@ -1012,7 +1012,7 @@ Changes from 20040614 to 20040709
LINK_[UP|DOWN] and RSCN events.
* Get rid of delay_iodone timer.
* Remove qfull timers and qfull logic.
- * Convert mbox_tmo, nlp_xri_tmo to 1 argment clock handler
+ * Convert mbox_tmo, nlp_xri_tmo to 1 argument clock handler
* Removed duplicate extern defs of the bind variables.
* Streamline usage of the defines CLASS2 and CLASS3, removing
un-necessary checks on config[LPFC_CFG_FCP_CLASS].
@@ -1369,7 +1369,7 @@ Changes from 20040416 to 20040426
* Removed lpfc_max_target from lpfc_linux_attach
* Replace references to lpfcDRVR.pHba[] with lpfc_get_phba_by_inst()
* Change lpfc_param to lpfc-param
- * Partially removed 32 HBA restriction within driver. Incorported
+ * Partially removed 32 HBA restriction within driver. Incorporated
lpfc_instcnt, lpfc_instance[], and pHba[] into lpfcDRVR
structure Added routines lpfc_get_phba_by_inst()
lpfc_get_inst_by_phba() lpfc_check_valid_phba()
@@ -1535,7 +1535,7 @@ Changes from 20040326 to 20040402
* Use Linux list macros for DMABUF_t
* Break up ioctls into 3 sections, dfc, util, hbaapi
rearranged code so this could be easily separated into a
- differnet module later All 3 are currently turned on by
+ different module later. All 3 are currently turned on by
defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL,
LPFC_HBAAPI_IOCTL
* Misc cleanup: some goto's; add comments; clarify function
@@ -1562,7 +1562,7 @@ Changes from 20040326 to 20040402
* Remove unused log message.
* Collapse elx_crtn.h and prod_crtn.h into lpfc_crtn.h
* Ifdef Scheduler specific routines
- * Removed following ununsed ioclt's: ELX_READ_IOCB
+ * Removed following unused ioctl's: ELX_READ_IOCB
ELX_READ_MEMSEG ELX_READ_BINFO ELX_READ_EINVAL ELX_READ_LHBA
ELX_READ_LXHBA ELX_SET ELX_DBG LPFC_TRACE
* Removed variable fc_dbg_flg
@@ -1570,7 +1570,7 @@ Changes from 20040326 to 20040402
3-digit HBAs. Also changed can_queue so midlayer will only
send (HBA_Q_DEPTH - 10) cmds.
* Clean up code in the error path, check condition. Remove
- ununsed sense-related fields in lun structure.
+ unused sense-related fields in lun structure.
* Added code for safety pools for following objects: mbuf/bpl,
mbox, iocb, ndlp, bind
* Wrapped '#include <elx_sched.h>' in '#ifdef USE_SCHEDULER'.
@@ -1592,7 +1592,7 @@ Changes from 20040326 to 20040402
ELX_READ_HBA ELX_INSTANCE ELX_LIP. Also introduced
attribute "set" to be used in conjunction with the above
attributes.
- * Removed DLINK, enque and deque declarations now that clock
+ * Removed DLINK, enqueue and dequeue declarations now that clock
doesn't use them anymore
* Separated install rule so that BUILD_IPFC has to be set when
make is called in order for the install rule to attempt to
@@ -1662,7 +1662,7 @@ Changes from 20040326 to 20040402
* Create utility clock function elx_start_timer() and
elx_stop_timer(). All timeout routines now use these common
routines.
- * Minor formating changes fix up comments
+ * Minor formatting changes fix up comments
* Minor formatting changes get rid of failover defines for
syntax checking
* Minor formatting changes remove ISCSI defines.
@@ -1676,7 +1676,7 @@ Changes from 20040326 to 20040402
will not exist otherwise.
* Removed unused malloc counters from lpfcLINUXfcp.c.
* Remove some unnecessary #includes in lpfcLINUXfcp.c
- * Remove unncessary #includes in elxLINUXfcp.c
+ * Remove unnecessary #includes in elxLINUXfcp.c
* Minor formatting cleanups in Makefile to avoid some
linewrapping.
* Removed unused elx_mem_pool data structure.
@@ -1753,7 +1753,7 @@ Changes from 20040319 to 20040326
elx_str_atox).
* Replaced DLINK_t and SLINK_t by standard Linux list_head
* Removed deque macro
- * Replaced ELX_DLINK_t ans ELX_SLINK_t by Linux struct list_head
+ * Replaced ELX_DLINK_t and ELX_SLINK_t by Linux struct list_head
(except for clock)
* Removed following functions from code: linux_kmalloc linux_kfree
elx_alloc_bigbuf elx_free_bigbuf
@@ -1801,7 +1801,7 @@ Changes from 20040312 to 20040319
* Correct Iocbq completion routine for 2.6 kernel case
* Change void *pOSCmd to Scsi_Smnd *pCmd
* Change void *pOScmd to struct sk_buff *pCmd
- * Remove data directon code.
+ * Remove data direction code.
* Removed memory pool for buf/bpl buffers and use kmalloc/kfree
pci_pool_alloc/free directly.
* Move PPC check for DMA address 0 in scatter-gather list, into
diff -- a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -22,7 +22,7 @@ Older Version : 2.20.4.8 (scsi module),
Customer reported "garbage in file on x86_64 platform".
Root Cause: the driver registered controllers as 64-bit DMA capable
for those which are not support it.
- Fix: Made change in the function inserting identification machanism
+ Fix: Made change in the function inserting identification mechanism
identifying 64-bit DMA capable controllers.
> -----Original Message-----
@@ -82,9 +82,9 @@ Older Version : 2.20.4.8 (scsi module),
Fix: MegaRAID F/W has fixed the problem and being process of release,
soon. Meanwhile, driver will filter out the request.
-3. One of member in the data structure of the driver leads unaligne
+3. One member in the data structure of the driver leads to unaligned
issue on 64-bit platform.
- Customer reporeted "kernel unaligned access addrss" issue when
+ Customer reported "kernel unaligned access address" issue when
application communicates with MegaRAID HBA driver.
Root Cause: in uioc_t structure, one of member had misaligned and it
led system to display the error message.
@@ -441,7 +441,7 @@ i. When copying the mailbox packets, cop
avoid getting the stale values for busy bit. We want to set the busy
bit just before issuing command to the FW.
-ii. In the reset handling, if the reseted command is not owned by the
+ii. In the reset handling, if the reset command is not owned by the
driver, do not (wrongly) print information for the "attached" driver
packet.
diff -- a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -517,7 +517,7 @@ i. bios_param entry added in scsi_host_t
1. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time.
2. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead
- (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS
+ (hw_crit_error=1). If hw_crit_error==1, now we do not accept any processing of pending cmds/accept any cmd from OS
1 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2 Current Version : 00.00.03.05
@@ -562,7 +562,7 @@ vii. Added print : FW now in Ready State
2 Current Version : 00.00.03.02
3 Older Version : 00.00.03.01
-i. Added FW tranistion state for Hotplug scenario
+i. Added FW transition state for Hotplug scenario
1 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2 Current Version : 00.00.03.01
diff -- a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx
--- a/Documentation/scsi/ChangeLog.ncr53c8xx
+++ b/Documentation/scsi/ChangeLog.ncr53c8xx
@@ -230,7 +230,7 @@ Sat Nov 21 18:00 1998 Gerard Roudier (g
- Still a buglet in the tags initial settings that needed to be fixed.
It was not possible to disable TGQ at system startup for devices
that claim TGQ support. The driver used at least 2 for the queue
- depth but did'nt keep track of user settings for tags depth lower
+ depth but didn't keep track of user settings for tags depth lower
than 2.
Wed Nov 11 10:00 1998 Gerard Roudier (groudier@club-internet.fr)
@@ -270,7 +270,7 @@ Sun Oct 4 14:00 1998 Gerard Roudier (gr
were due to a SCSI selection problem triggered by a clearly
documented feature that in fact seems not to work: (53C8XX chips
are claimed by the manuals to be able to execute SCSI scripts just
- after abitration while the SCSI core is performing SCSI selection).
+ after arbitration while the SCSI core is performing SCSI selection).
This optimization is broken and has been removed.
- Some broken scsi devices are confused when a negotiation is started
on a LUN that does not correspond to a real device. According to
@@ -347,7 +347,7 @@ Tue Jun 4 23:00 1998 Gerard Roudier (gro
- Code cleanup and simplification:
Remove kernel 1.2.X and 1.3.X support.
Remove the _old_ target capabilities table.
- Remove the error recovery code that have'nt been really useful.
+ Remove the error recovery code that hasn't been really useful.
Use a single alignment boundary (CACHE_LINE_SIZE) for data
structures.
- Several aggressive SCRIPTS optimizations and changes:
@@ -367,8 +367,8 @@ Wed May 13 20:00 1998 Gerard Roudier (gr
- Some simplification for 64 bit arch done ccb address testing.
- Add a check of the MSG_OUT phase after Selection with ATN.
- The new tagged queue stuff seems ok, so some informationnal
- message have been conditionned by verbose >= 3.
- - Donnot reset if a SBMC interrupt reports the same bus mode.
+ message have been conditioned by verbose >= 3.
+ - Do not reset if a SBMC interrupt reports the same bus mode.
- Print out the whole driver set-up. Some options were missing and
the print statement was misplaced for modules.
- Ignore a SCSI parity interrupt if the chip is not connected to
@@ -392,7 +392,7 @@ Sat Apr 25 21:00 1998 Gerard Roudier (gr
context on phase mismatch.
- The above allows now to use the on-chip RAM without requiring
to get access to the on-chip RAM from the C code. This makes
- on-chip RAM useable for linux-1.2.13 and for Linux-Alpha for
+ on-chip RAM usable for linux-1.2.13 and for Linux-Alpha for
instance.
- Some simplifications and cleanups in the SCRIPTS and C code.
- Buglet fixed in parity error recovery SCRIPTS (never tested).
@@ -433,7 +433,7 @@ Sun Mar 29 12:00 1998 Gerard Roudier (gr
Tue Mar 26 23:00 1998 Gerard Roudier (groudier@club-internet.fr)
* revision 2.6g
- - New done queue. 8 entries by default (6 always useable).
+ - New done queue. 8 entries by default (6 always usable).
Can be increased if needed.
- Resources management using doubly linked queues.
- New auto-sense and QUEUE FULL handling that does not need to
@@ -464,7 +464,7 @@ Sun Jan 11 22:00 1998 Gerard Roudier (gr
- generalization of the restart of CCB on special condition as
Abort, QUEUE FULL, CHECK CONDITION.
This has been called 'silly scheduler'.
- - make all the profiling code conditionned by a config option.
+ - make all the profiling code conditioned by a config option.
This spare some PCI traffic and C code when this feature is not
needed.
- handle more cleanly the situation where direction is unknown.
diff -- a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx
--- a/Documentation/scsi/ChangeLog.sym53c8xx
+++ b/Documentation/scsi/ChangeLog.sym53c8xx
@@ -255,7 +255,7 @@ Sat Sep 11 11:00 1999 Gerard Roudier (g
- Work-around PCI chips being reported twice on some platforms.
- Add some redundant PCI reads in order to deal with common
bridge misbehaviour regarding posted write flushing.
- - Add some other conditionnal code for people who have to deal
+ - Add some other conditional code for people who have to deal
with really broken bridges (they will have to edit a source
file to try these options).
- Handle correctly (hopefully) jiffies wrap-around.
@@ -300,7 +300,7 @@ Sat May 29 12:00 1999 Gerard Roudier (g
Tue May 25 23:00 1999 Gerard Roudier (groudier@club-internet.fr)
* version sym53c8xx-1.5a
- Add support for task abort and bus device reset SCSI message
- and implement proper synchonisation with SCRIPTS to handle
+ and implement proper synchronisation with SCRIPTS to handle
correctly task abortion without races.
- Send an ABORT message (if untagged) or ABORT TAG message (if tagged)
when the driver is told to abort a command that is disconnected and
@@ -410,7 +410,7 @@ Fri Feb 12 23:00 1999 Gerard Roudier (g
the support of non compliant SCSI removal, insertion and all
kinds of screw-up that may happen on the SCSI BUS.
Hopefully, the driver is now unbreakable or may-be, it is just
- quite brocken. :-)
+ quite broken. :-)
Many thanks to Johnson Russel (Symbios) for having responded to
my questions and for his interesting advices and comments about
support of SCSI hot-plug.
@@ -432,7 +432,7 @@ Sun Jan 31 18:00 1999 Gerard Roudier (g
Sun Jan 24 18:00 1999 Gerard Roudier (groudier@club-internet.fr)
* version sym53c8xx-1.1
- Major rewrite of the SCSI parity error handling.
- The informations contained in the data manuals are incomplete about
+ The information contained in the data manuals is incomplete about
this feature.
I asked SYMBIOS about and got in reply the explanations that are
_indeed_ missing in the data manuals.
@@ -460,7 +460,7 @@ Sat Dec 19 21:00 1998 Gerard Roudier (g
- Revamp slightly the Symbios NVRAM lay-out based on the excerpt of
the header file I received from Symbios.
- Check the PCI bus number for the boot order (Using a fast
- PCI controller behing a PCI-PCI bridge seems sub-optimal).
+ PCI controller behind a PCI-PCI bridge seems sub-optimal).
- Disable overlapped PCI arbitration for the 896 revision 1.
- Reduce a bit the number of IO register reads for phase mismatch
by reading DWORDS at a time instead of BYTES.
@@ -488,7 +488,7 @@ Sun Nov 29 18:00 1998 Gerard Roudier (g
Tue Nov 24 23:00 1998 Gerard Roudier (groudier@club-internet.fr)
* version pre-sym53c8xx-0.16
- Add SCSI_NCR_OPTIMIZE_896_1 compile option and 'optim' boot option.
- When set, the driver unconditionnaly assumes that the interrupt
+ When set, the driver unconditionally assumes that the interrupt
handler is called for command completion, then clears INTF, scans
the done queue and returns if some completed CCB is found. If no
completed CCB are found, interrupt handling will proceed normally.
@@ -502,7 +502,7 @@ Tue Nov 24 23:00 1998 Gerard Roudier (g
- Still a buglet in the tags initial settings that needed to be fixed.
It was not possible to disable TGQ at system startup for devices
that claim TGQ support. The driver used at least 2 for the queue
- depth but did'nt keep track of user settings for tags depth lower
+ depth but didn't keep track of user settings for tags depth lower
than 2.
Thu Nov 19 23:00 1998 Gerard Roudier (groudier@club-internet.fr)
diff -- a/Documentation/scsi/ChangeLog.sym53c8xx_2 b/Documentation/scsi/ChangeLog.sym53c8xx_2
--- a/Documentation/scsi/ChangeLog.sym53c8xx_2
+++ b/Documentation/scsi/ChangeLog.sym53c8xx_2
@@ -40,7 +40,7 @@ Wed Feb 7 21:00 2001 Gerard Roudier
- Call pci_enable_device() as wished by kernel maintainers.
- Change the sym_queue_scsiio() interface.
This is intended to simplify portability.
- - Move the code intended to deal with the dowloading of SCRIPTS
+ - Move the code intended to deal with the downloading of SCRIPTS
from SCRIPTS :) in the patch method (was wrongly placed in
the SCRIPTS setup method).
- Add a missing cpu_to_scr() (np->abort_tbl.addr)
@@ -53,9 +53,9 @@ Sat Mar 3 21:00 2001 Gerard Roudier
Also move the code that sniffes INQUIRY to sym_misc.c.
This allows to share the corresponding code with NetBSD
without polluating the core driver source (sym_hipd.c).
- - Add optionnal code that handles IO timeouts from the driver.
+ - Add optional code that handles IO timeouts from the driver.
(not used under Linux, but required for NetBSD)
- - Donnot assume any longer that PAGE_SHIFT and PAGE_SIZE are
+ - Do not assume any longer that PAGE_SHIFT and PAGE_SIZE are
defined at compile time, as at least NetBSD uses variables
in memory for that.
- Refine a work-around for the C1010-33 that consists in
@@ -104,7 +104,7 @@ Sun Sep 9 18:00 2001 Gerard Roudier
- Change my email address.
- Add infrastructure for the forthcoming 64 bit DMA addressing support.
(Based on PCI 64 bit patch from David S. Miller)
- - Donnot use anymore vm_offset_t type.
+ - Do not use anymore vm_offset_t type.
Sat Sep 15 20:00 2001 Gerard Roudier
* version sym-2.1.13-20010916
@@ -119,7 +119,7 @@ Sat Sep 22 12:00 2001 Gerard Roudier
Sun Sep 30 17:00 2001 Gerard Roudier
* version sym-2.1.15-20010930
- - Include <linux/module.h> unconditionnaly as expected by latest
+ - Include <linux/module.h> unconditionally as expected by latest
kernels.
- Use del_timer_sync() for recent kernels to kill the driver timer
on module release.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 7/9] Documentation: scsi: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (5 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 6/9] Documentation: scsi/ChangeLog*: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-29 23:10 ` [PATCH 8/9] Documentation: sparc: " Randy Dunlap
` (4 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, James E.J. Bottomley,
Martin K. Petersen, linux-scsi
Correct spelling problems for Documentation/scsi/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
---
Documentation/scsi/ncr53c8xx.rst | 4 ++--
Documentation/scsi/sym53c8xx_2.rst | 2 +-
Documentation/scsi/tcm_qla2xxx.rst | 2 +-
Documentation/scsi/ufs.rst | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff -- a/Documentation/scsi/ncr53c8xx.rst b/Documentation/scsi/ncr53c8xx.rst
--- a/Documentation/scsi/ncr53c8xx.rst
+++ b/Documentation/scsi/ncr53c8xx.rst
@@ -906,7 +906,7 @@ burst:#x burst enabled (1<<#x burst tr
led:0 disable LED support
===== ===================
- Donnot enable LED support if your scsi board does not use SDMS BIOS.
+ Do not enable LED support if your scsi board does not use SDMS BIOS.
(See 'Configuration parameters')
10.2.13 Max wide
@@ -1222,7 +1222,7 @@ Unfortunately, the following common SCSI
- Bad quality terminators.
On the other hand, either bad cabling, broken devices, not conformant
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+devices, ... may cause a SCSI signal to be wrong when the driver reads it.
10.7 IMMEDIATE ARBITRATION boot option
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff -- a/Documentation/scsi/sym53c8xx_2.rst b/Documentation/scsi/sym53c8xx_2.rst
--- a/Documentation/scsi/sym53c8xx_2.rst
+++ b/Documentation/scsi/sym53c8xx_2.rst
@@ -703,7 +703,7 @@ Unfortunately, the following common SCSI
- Bad quality terminators.
On the other hand, either bad cabling, broken devices, not conformant
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+devices, ... may cause a SCSI signal to be wrong when the driver reads it.
15. SCSI problem troubleshooting
================================
diff -- a/Documentation/scsi/tcm_qla2xxx.rst b/Documentation/scsi/tcm_qla2xxx.rst
--- a/Documentation/scsi/tcm_qla2xxx.rst
+++ b/Documentation/scsi/tcm_qla2xxx.rst
@@ -6,7 +6,7 @@ tcm_qla2xxx Driver Notes
tcm_qla2xxx jam_host attribute
------------------------------
-There is now a new module endpoint atribute called jam_host
+There is now a new module endpoint attribute called jam_host
attribute::
jam_host: boolean=0/1
diff -- a/Documentation/scsi/ufs.rst b/Documentation/scsi/ufs.rst
--- a/Documentation/scsi/ufs.rst
+++ b/Documentation/scsi/ufs.rst
@@ -206,5 +206,5 @@ Device-Specific Data property named "ref
is interpreted as frequency in Hz and must match one of the values given in
the UFS specification. UFS subsystem will attempt to read the value when
executing common controller initialization. If the value is available, UFS
-subsytem will ensure the bRefClkFreq attribute of the UFS storage device is
+subsystem will ensure the bRefClkFreq attribute of the UFS storage device is
set accordingly and will modify it if there is a mismatch.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 8/9] Documentation: sparc: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (6 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 7/9] Documentation: scsi: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-29 23:10 ` [PATCH 9/9] Documentation: userspace-api: " Randy Dunlap
` (3 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, David S. Miller, sparclinux
Correct spelling problems for Documentation/sparc/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
---
Documentation/sparc/adi.rst | 4 -
Documentation/sparc/oradax/dax-hv-api.txt | 44 ++++++++++----------
2 files changed, 24 insertions(+), 24 deletions(-)
diff -- a/Documentation/sparc/adi.rst b/Documentation/sparc/adi.rst
--- a/Documentation/sparc/adi.rst
+++ b/Documentation/sparc/adi.rst
@@ -38,7 +38,7 @@ virtual addresses that contain 0xa in bi
ADI is enabled on a set of pages using mprotect() with PROT_ADI flag.
When ADI is enabled on a set of pages by a task for the first time,
-kernel sets the PSTATE.mcde bit fot the task. Version tags for memory
+kernel sets the PSTATE.mcde bit for the task. Version tags for memory
addresses are set with an stxa instruction on the addresses using
ASI_MCD_PRIMARY or ASI_MCD_ST_BLKINIT_PRIMARY. ADI block size is
provided by the hypervisor to the kernel. Kernel returns the value of
@@ -97,7 +97,7 @@ With ADI enabled, following new traps ma
Disrupting memory corruption
----------------------------
- When a store accesses a memory localtion that has TTE.mcd=1,
+ When a store accesses a memory location that has TTE.mcd=1,
the task is running with ADI enabled (PSTATE.mcde=1), and the ADI
tag in the address used (bits 63:60) does not match the tag set on
the corresponding cacheline, a memory corruption trap occurs. By
diff -- a/Documentation/sparc/oradax/dax-hv-api.txt b/Documentation/sparc/oradax/dax-hv-api.txt
--- a/Documentation/sparc/oradax/dax-hv-api.txt
+++ b/Documentation/sparc/oradax/dax-hv-api.txt
@@ -22,7 +22,7 @@ Chapter 36. Coprocessor services
functionality offered may vary by virtual machine implementation.
The DAX is a virtual device to sun4v guests, with supported data operations indicated by the virtual device
- compatibilty property. Functionality is accessed through the submission of Command Control Blocks
+ compatibility property. Functionality is accessed through the submission of Command Control Blocks
(CCBs) via the ccb_submit API function. The operations are processed asynchronously, with the status
of the submitted operations reported through a Completion Area linked to each CCB. Each CCB has a
separate Completion Area and, unless execution order is specifically restricted through the use of serial-
@@ -313,7 +313,7 @@ bits set, and terminate at a CCB that ha
Secondary Input Description
Format Code
- 0 Element is stored as value minus 1 (0 evalutes to 1, 1 evalutes
+ 0 Element is stored as value minus 1 (0 evaluates to 1, 1 evaluates
to 2, etc)
1 Element is stored as value
@@ -659,7 +659,7 @@ Offset Size Field Des
“Secondary Input Element Size”
[13:10] Output Format (see Section 36.2.1.1.6, “Output Format”)
[9:5] Operand size for first scan criteria value. In a scan value
- operation, this is one of two potential extact match values.
+ operation, this is one of two potential exact match values.
In a scan range operation, this is the size of the upper range
@@ -673,7 +673,7 @@ Offset Size Field Description
operand, minus 1. Values 0xF-0x1E are reserved. A value of
0x1F indicates this operand is not in use for this scan operation.
[4:0] Operand size for second scan criteria value. In a scan value
- operation, this is one of two potential extact match values.
+ operation, this is one of two potential exact match values.
In a scan range operation, this is the size of the lower range
boundary. The value of this field is the number of bytes in the
operand, minus 1. Values 0xF-0x1E are reserved. A value of
@@ -690,24 +690,24 @@ Offset Size Field Description
48 8 Output (same fields as Primary Input)
56 8 Symbol Table (if used by Primary Input). Same fields as Section 36.2.1.2,
“Extract command”
-64 4 Next 4 most significant bytes of first scan criteria operand occuring after the
+64 4 Next 4 most significant bytes of first scan criteria operand occurring after the
bytes specified at offset 40, if needed by the operand size. If first operand
is less than 8 bytes, the valid bytes are left-aligned to the lowest address.
-68 4 Next 4 most significant bytes of second scan criteria operand occuring after
+68 4 Next 4 most significant bytes of second scan criteria operand occurring after
the bytes specified at offset 44, if needed by the operand size. If second
operand is less than 8 bytes, the valid bytes are left-aligned to the lowest
address.
-72 4 Next 4 most significant bytes of first scan criteria operand occuring after the
+72 4 Next 4 most significant bytes of first scan criteria operand occurring after the
bytes specified at offset 64, if needed by the operand size. If first operand
is less than 12 bytes, the valid bytes are left-aligned to the lowest address.
-76 4 Next 4 most significant bytes of second scan criteria operand occuring after
+76 4 Next 4 most significant bytes of second scan criteria operand occurring after
the bytes specified at offset 68, if needed by the operand size. If second
operand is less than 12 bytes, the valid bytes are left-aligned to the lowest
address.
-80 4 Next 4 most significant bytes of first scan criteria operand occuring after the
+80 4 Next 4 most significant bytes of first scan criteria operand occurring after the
bytes specified at offset 72, if needed by the operand size. If first operand
is less than 16 bytes, the valid bytes are left-aligned to the lowest address.
-84 4 Next 4 most significant bytes of second scan criteria operand occuring after
+84 4 Next 4 most significant bytes of second scan criteria operand occurring after
the bytes specified at offset 76, if needed by the operand size. If second
operand is less than 16 bytes, the valid bytes are left-aligned to the lowest
address.
@@ -721,10 +721,10 @@ Offset Size Field Description
36.2.1.4. Translate commands
- The translate commands takes an input array of indicies, and a table of single bit values indexed by those
- indicies, and outputs a bit vector or index array created by reading the tables bit value at each index in
+ The translate commands takes an input array of indices, and a table of single bit values indexed by those
+ indices, and outputs a bit vector or index array created by reading the tables bit value at each index in
the input array. The output should therefore contain exactly one bit per index in the input data stream,
- when outputing as a bit vector. When outputing as an index array, the number of elements depends on the
+ when outputting as a bit vector. When outputting as an index array, the number of elements depends on the
values read in the bit table, but will always be less than, or equal to, the number of input elements. Only
a restricted subset of the possible input format types are supported. No variable width or Huffman/OZIP
encoded input streams are allowed. The primary input data element size must be 3 bytes or less.
@@ -742,7 +742,7 @@ Offset Size Field Description
code in the CCB header.
There are two supported formats for the output stream: the bit vector and index array formats (codes 0x8,
- 0xD, and 0xE). The index array format is an array of indicies of bits which would have been set if the
+ 0xD, and 0xE). The index array format is an array of indices of bits which would have been set if the
output format was a bit array.
The return value of the CCB completion area contains the number of bits set in the output bit vector,
@@ -1254,7 +1254,7 @@ EUNAVAILABLE The requested CCB operati
submitted CCB, or may apply to a larger scope. The status should not be
interpreted as permanent, and the guest should attempt to submit CCBs in
the future which had previously been unable to be performed. The status
- data provides additional information about scope of the retricted availability
+ data provides additional information about scope of the restricted availability
as follows:
Value Description
0 Processing for the exact CCB instance submitted was unavailable,
@@ -1330,20 +1330,20 @@ EUNAVAILABLE The requested CCB operati
of other CCBs ahead of the requested CCB, to provide a relative estimate of when the CCB may execute.
The dax return value is only valid when the state is ENQUEUED. The value returned is the DAX unit
- instance indentifier for the DAX unit processing the queue where the requested CCB is located. The value
+ instance identifier for the DAX unit processing the queue where the requested CCB is located. The value
matches the value that would have been, or was, returned by ccb_submit using the queue info flag.
The queue return value is only valid when the state is ENQUEUED. The value returned is the DAX
- queue instance indentifier for the DAX unit processing the queue where the requested CCB is located. The
+ queue instance identifier for the DAX unit processing the queue where the requested CCB is located. The
value matches the value that would have been, or was, returned by ccb_submit using the queue info flag.
36.3.2.1. Errors
- EOK The request was proccessed and the CCB state is valid.
+ EOK The request was processed and the CCB state is valid.
EBADALIGN address is not on a 64-byte aligned.
ENORADDR The real address provided for address is not valid.
EINVAL The CCB completion area contents are not valid.
- EWOULDBLOCK Internal resource contraints prevented the CCB state from being queried at this
+ EWOULDBLOCK Internal resource constraints prevented the CCB state from being queried at this
time. The guest should retry the request.
ENOACCESS The guest does not have permission to access the coprocessor virtual device
functionality.
@@ -1401,11 +1401,11 @@ EUNAVAILABLE The requested CCB operati
36.3.3.2. Errors
- EOK The request was proccessed and the result is valid.
+ EOK The request was processed and the result is valid.
EBADALIGN address is not on a 64-byte aligned.
ENORADDR The real address provided for address is not valid.
EINVAL The CCB completion area contents are not valid.
- EWOULDBLOCK Internal resource contraints prevented the CCB from being killed at this time.
+ EWOULDBLOCK Internal resource constraints prevented the CCB from being killed at this time.
The guest should retry the request.
ENOACCESS The guest does not have permission to access the coprocessor virtual device
functionality.
@@ -1423,7 +1423,7 @@ EUNAVAILABLE The requested CCB operati
36.3.4.1. Errors
- EOK The request was proccessed and the number of enabled/disabled DAX units
+ EOK The request was processed and the number of enabled/disabled DAX units
are valid.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 9/9] Documentation: userspace-api: correct spelling
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (7 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 8/9] Documentation: sparc: " Randy Dunlap
@ 2023-01-29 23:10 ` Randy Dunlap
2023-01-31 12:10 ` [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) patchwork-bot+netdevbpf
` (2 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Randy Dunlap @ 2023-01-29 23:10 UTC (permalink / raw)
To: linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Sean Young,
Mauro Carvalho Chehab, linux-media
Correct spelling problems for Documentation/userspace-api/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
---
Documentation/userspace-api/iommufd.rst | 2 +-
Documentation/userspace-api/media/drivers/st-vgxy61.rst | 2 +-
Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst | 2 +-
Documentation/userspace-api/media/rc/rc-protos.rst | 2 +-
Documentation/userspace-api/media/rc/rc-tables.rst | 2 +-
Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst | 2 +-
Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst | 2 +-
Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst | 2 +-
Documentation/userspace-api/media/v4l/hist-v4l2.rst | 4 ++--
Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst | 2 +-
Documentation/userspace-api/media/v4l/vidioc-cropcap.rst | 2 +-
Documentation/userspace-api/seccomp_filter.rst | 2 +-
Documentation/userspace-api/sysfs-platform_profile.rst | 2 +-
13 files changed, 14 insertions(+), 14 deletions(-)
diff -- a/Documentation/userspace-api/iommufd.rst b/Documentation/userspace-api/iommufd.rst
--- a/Documentation/userspace-api/iommufd.rst
+++ b/Documentation/userspace-api/iommufd.rst
@@ -165,7 +165,7 @@ Multiple io_pagetable-s, through their i
iopt_pages which avoids multi-pinning and double accounting of page
consumption.
-iommufd_ioas is sharable between subsystems, e.g. VFIO and VDPA, as long as
+iommufd_ioas is shareable between subsystems, e.g. VFIO and VDPA, as long as
devices managed by different subsystems are bound to a same iommufd.
IOMMUFD User API
diff -- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
--- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
+++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
@@ -490,7 +490,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv
- An alternate form of the sliced VBI data payload used when 36
lines of sliced VBI data are present. No line masks are provided
in this form of the payload; all valid line mask bits are
- implcitly set.
+ implicitly set.
* - }
-
diff -- a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst
--- a/Documentation/userspace-api/seccomp_filter.rst
+++ b/Documentation/userspace-api/seccomp_filter.rst
@@ -274,7 +274,7 @@ value will be the injected file descript
The notifying process can be preempted, resulting in the notification being
aborted. This can be problematic when trying to take actions on behalf of the
notifying process that are long-running and typically retryable (mounting a
-filesytem). Alternatively, at filter installation time, the
+filesystem). Alternatively, at filter installation time, the
``SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV`` flag can be set. This flag makes it
such that when a user notification is received by the supervisor, the notifying
process will ignore non-fatal signals until the response is sent. Signals that
diff -- a/Documentation/userspace-api/media/v4l/hist-v4l2.rst b/Documentation/userspace-api/media/v4l/hist-v4l2.rst
--- a/Documentation/userspace-api/media/v4l/hist-v4l2.rst
+++ b/Documentation/userspace-api/media/v4l/hist-v4l2.rst
@@ -47,7 +47,7 @@ Codec API was released.
1998-11-08: Many minor changes. Most symbols have been renamed. Some
material changes to struct v4l2_capability.
-1998-11-12: The read/write directon of some ioctls was misdefined.
+1998-11-12: The read/write direction of some ioctls was misdefined.
1998-11-14: ``V4L2_PIX_FMT_RGB24`` changed to ``V4L2_PIX_FMT_BGR24``,
and ``V4L2_PIX_FMT_RGB32`` changed to ``V4L2_PIX_FMT_BGR32``. Audio
@@ -145,7 +145,7 @@ common Linux driver API conventions.
``VIDIOC_G_INFMT``, ``VIDIOC_S_OUTFMT``, ``VIDIOC_G_OUTFMT``,
``VIDIOC_S_VBIFMT`` and ``VIDIOC_G_VBIFMT``. The image format
struct v4l2_format was renamed to struct v4l2_pix_format, while
- struct v4l2_format is now the envelopping structure
+ struct v4l2_format is now the enveloping structure
for all format negotiations.
5. Similar to the changes above, the ``VIDIOC_G_PARM`` and
diff -- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -1213,7 +1213,7 @@ FWHT Flags
- Luma AC coefficient table index.
* - __s8
- ``y_dc_delta``
- - Luma DC delta vaue.
+ - Luma DC delta value.
* - __s8
- ``y2_dc_delta``
- Y2 block DC delta value.
diff -- a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst
@@ -8,7 +8,7 @@ JPEG Control Reference
The JPEG class includes controls for common features of JPEG encoders
and decoders. Currently it includes features for codecs implementing
-progressive baseline DCT compression process with Huffman entrophy
+progressive baseline DCT compression process with Huffman entropy
coding.
diff -- a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
--- a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
@@ -71,7 +71,7 @@ overlay devices.
- Default cropping rectangle, it shall cover the "whole picture".
Assuming pixel aspect 1/1 this could be for example a 640 × 480
rectangle for NTSC, a 768 × 576 rectangle for PAL and SECAM
- centered over the active picture area. The same co-ordinate system
+ centered over the active picture area. The same coordinate system
as for ``bounds`` is used.
* - struct :c:type:`v4l2_fract`
- ``pixelaspect``
diff -- a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
--- a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
@@ -43,7 +43,7 @@ reduced range of reception.
.. note::
- Wide band receiver might be implictly enabled if you enable
+ Wide band receiver might be implicitly enabled if you enable
carrier reports. In that case it will be disabled as soon as you disable
carrier reports. Trying to disable wide band receiver while carrier
reports are active will do nothing.
diff -- a/Documentation/userspace-api/media/rc/rc-protos.rst b/Documentation/userspace-api/media/rc/rc-protos.rst
--- a/Documentation/userspace-api/media/rc/rc-protos.rst
+++ b/Documentation/userspace-api/media/rc/rc-protos.rst
@@ -75,7 +75,7 @@ protocol, or the manchester BPF decoder.
- Command
There is a variant of rc5 called either rc5x or extended rc5
-where there the second stop bit is the 6th commmand bit, but inverted.
+where there the second stop bit is the 6th command bit, but inverted.
This is done so it the scancodes and encoding is compatible with existing
schemes. This bit is stored in bit 6 of the scancode, inverted. This is
done to keep it compatible with plain rc-5 where there are two start bits.
diff -- a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst
--- a/Documentation/userspace-api/media/rc/rc-tables.rst
+++ b/Documentation/userspace-api/media/rc/rc-tables.rst
@@ -628,7 +628,7 @@ the remote via /dev/input/event devices.
- Put device into zoom/full screen mode
- - ZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH
+ - ZOOM / FULL SCREEN / ZOOM+ / HIDE PANEL / SWITCH
- .. row 80
diff -- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst
--- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst
@@ -14,7 +14,7 @@ are often referred to as greyscale forma
- In all the tables that follow, bit 7 is the most significant bit in a byte.
- Formats are described with the minimum number of pixels needed to create a
byte-aligned repeating pattern. `...` indicates repetition of the pattern.
- - Y'\ :sub:`x`\ [9:2] denotes bits 9 to 2 of the Y' value for pixel at colum
+ - Y'\ :sub:`x`\ [9:2] denotes bits 9 to 2 of the Y' value for pixel at column
`x`.
- `0` denotes padding bits set to 0.
diff -- a/Documentation/userspace-api/media/drivers/st-vgxy61.rst b/Documentation/userspace-api/media/drivers/st-vgxy61.rst
--- a/Documentation/userspace-api/media/drivers/st-vgxy61.rst
+++ b/Documentation/userspace-api/media/drivers/st-vgxy61.rst
@@ -18,7 +18,7 @@ The ST VGXY61 driver implements the foll
* - HDR linearize
- The merger outputs a long exposure capture as long as it is not
saturated.
- * - HDR substraction
+ * - HDR subtraction
- This involves subtracting the short exposure frame from the long
exposure frame.
* - No HDR
diff -- a/Documentation/userspace-api/sysfs-platform_profile.rst b/Documentation/userspace-api/sysfs-platform_profile.rst
--- a/Documentation/userspace-api/sysfs-platform_profile.rst
+++ b/Documentation/userspace-api/sysfs-platform_profile.rst
@@ -37,6 +37,6 @@ representation onto this fixed set.
If there is no good match when mapping then a new profile name may be
added. Drivers which wish to introduce new profile names must:
- 1. Explain why the existing profile names canot be used.
+ 1. Explain why the existing profile names cannot be used.
2. Add the new profile name, along with a clear description of the
expected behaviour, to the sysfs-platform_profile ABI documentation.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/9] Documentation: hwmon: correct spelling
2023-01-29 23:10 ` [PATCH 3/9] Documentation: hwmon: " Randy Dunlap
@ 2023-01-30 0:39 ` Guenter Roeck
0 siblings, 0 replies; 24+ messages in thread
From: Guenter Roeck @ 2023-01-30 0:39 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-kernel, Jonathan Corbet, linux-doc, Jean Delvare, linux-hwmon
On Sun, Jan 29, 2023 at 03:10:47PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/hwmon/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: linux-hwmon@vger.kernel.org
Applied to hwmon-next.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 5/9] Documentation: RCU: correct spelling
2023-01-29 23:10 ` [PATCH 5/9] Documentation: RCU: " Randy Dunlap
@ 2023-01-30 5:24 ` Paul E. McKenney
0 siblings, 0 replies; 24+ messages in thread
From: Paul E. McKenney @ 2023-01-30 5:24 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-kernel, Jonathan Corbet, linux-doc, Frederic Weisbecker,
Neeraj Upadhyay, Josh Triplett, rcu
On Sun, Jan 29, 2023 at 03:10:49PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/RCU/ as reported
> by codespell.
>
> Note: in RTFP.txt, there are other misspellings that are left as is
> since they were used that way in email Subject: lines or in LWN.net
> articles. [preemptable, Preemptable, synchonisation]
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: Frederic Weisbecker <frederic@kernel.org>
> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
> Cc: Josh Triplett <josh@joshtriplett.org>
> Cc: rcu@vger.kernel.org
Queued despite affinitied being a perfectly cromulent word. ;-)
Thank you!
Thanx, Paul
> ---
> .../Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst | 6 +++---
> .../Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst | 2 +-
> .../RTFP.txt | 10 +++++-----
> .../UP.rst | 4 ++--
> .../lockdep.rst | 2 +-
> .../torture.rst | 4 ++--
> 6 files changed, 14 insertions(+), 14 deletions(-)
>
> diff -- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
> --- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
> +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
> @@ -277,7 +277,7 @@ the following access functions:
>
> Again, only one request in a given batch need actually carry out a
> grace-period operation, which means there must be an efficient way to
> -identify which of many concurrent reqeusts will initiate the grace
> +identify which of many concurrent requests will initiate the grace
> period, and that there be an efficient way for the remaining requests to
> wait for that grace period to complete. However, that is the topic of
> the next section.
> @@ -405,7 +405,7 @@ Use of Workqueues
> In earlier implementations, the task requesting the expedited grace
> period also drove it to completion. This straightforward approach had
> the disadvantage of needing to account for POSIX signals sent to user
> -tasks, so more recent implemementations use the Linux kernel's
> +tasks, so more recent implementations use the Linux kernel's
> workqueues (see Documentation/core-api/workqueue.rst).
>
> The requesting task still does counter snapshotting and funnel-lock
> @@ -465,7 +465,7 @@ corresponding disadvantage that workqueu
> initialized, which does not happen until some time after the scheduler
> spawns the first task. Given that there are parts of the kernel that
> really do want to execute grace periods during this mid-boot “dead
> -zone”, expedited grace periods must do something else during thie time.
> +zone”, expedited grace periods must do something else during this time.
>
> What they do is to fall back to the old practice of requiring that the
> requesting task drive the expedited grace period, as was the case before
> diff -- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
> --- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
> +++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
> @@ -168,7 +168,7 @@ an ``atomic_add_return()`` of zero) to d
> +-----------------------------------------------------------------------+
>
> The approach must be extended to handle one final case, that of waking a
> -task blocked in ``synchronize_rcu()``. This task might be affinitied to
> +task blocked in ``synchronize_rcu()``. This task might be affined to
> a CPU that is not yet aware that the grace period has ended, and thus
> might not yet be subject to the grace period's memory ordering.
> Therefore, there is an ``smp_mb()`` after the return from
> diff -- a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst
> --- a/Documentation/RCU/lockdep.rst
> +++ b/Documentation/RCU/lockdep.rst
> @@ -65,7 +65,7 @@ checking of rcu_dereference() primitives
> rcu_access_pointer(p):
> Return the value of the pointer and omit all barriers,
> but retain the compiler constraints that prevent duplicating
> - or coalescsing. This is useful when testing the
> + or coalescing. This is useful when testing the
> value of the pointer itself, for example, against NULL.
>
> The rcu_dereference_check() check expression can be any boolean
> diff -- a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
> --- a/Documentation/RCU/RTFP.txt
> +++ b/Documentation/RCU/RTFP.txt
> @@ -201,7 +201,7 @@ work looked at debugging uses of RCU [Se
> In 2012, Josh Triplett received his Ph.D. with his dissertation
> covering RCU-protected resizable hash tables and the relationship
> between memory barriers and read-side traversal order: If the updater
> -is making changes in the opposite direction from the read-side traveral
> +is making changes in the opposite direction from the read-side traversal
> order, the updater need only execute a memory-barrier instruction,
> but if in the same direction, the updater needs to wait for a grace
> period between the individual updates [JoshTriplettPhD]. Also in 2012,
> @@ -1245,7 +1245,7 @@ Oregon Health and Sciences University"
> [Viewed September 5, 2005]"
> ,annotation={
> First posting showing how RCU can be safely adapted for
> - preemptable RCU read side critical sections.
> + preemptible RCU read side critical sections.
> }
> }
>
> @@ -1888,7 +1888,7 @@ Revised:
> \url{https://lore.kernel.org/r/20070910183004.GA3299@linux.vnet.ibm.com}
> [Viewed October 25, 2007]"
> ,annotation={
> - Final patch for preemptable RCU to -rt. (Later patches were
> + Final patch for preemptible RCU to -rt. (Later patches were
> to mainline, eventually incorporated.)
> }
> }
> @@ -2275,7 +2275,7 @@ lot of {Linux} into your technology!!!"
> \url{https://lore.kernel.org/r/20090724001429.GA17374@linux.vnet.ibm.com}
> [Viewed August 15, 2009]"
> ,annotation={
> - First posting of simple and fast preemptable RCU.
> + First posting of simple and fast preemptible RCU.
> }
> }
>
> @@ -2639,7 +2639,7 @@ lot of {Linux} into your technology!!!"
> RCU-protected hash tables, barriers vs. read-side traversal order.
> .
> If the updater is making changes in the opposite direction from
> - the read-side traveral order, the updater need only execute a
> + the read-side traversal order, the updater need only execute a
> memory-barrier instruction, but if in the same direction, the
> updater needs to wait for a grace period between the individual
> updates.
> diff -- a/Documentation/RCU/torture.rst b/Documentation/RCU/torture.rst
> --- a/Documentation/RCU/torture.rst
> +++ b/Documentation/RCU/torture.rst
> @@ -216,7 +216,7 @@ Kernel boot arguments can also be suppli
> rcutorture's module parameters. For example, to test a change to RCU's
> CPU stall-warning code, use "--bootargs 'rcutorture.stall_cpu=30'".
> This will of course result in the scripting reporting a failure, namely
> -the resuling RCU CPU stall warning. As noted above, reducing memory may
> +the resulting RCU CPU stall warning. As noted above, reducing memory may
> require disabling rcutorture's callback-flooding tests::
>
> kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
> @@ -370,5 +370,5 @@ You can also re-run a previous remote ru
> tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28-remote \
> --duration 24h
>
> -In this case, most of the kvm-again.sh parmeters may be supplied following
> +In this case, most of the kvm-again.sh parameters may be supplied following
> the pathname of the old run-results directory.
> diff -- a/Documentation/RCU/UP.rst b/Documentation/RCU/UP.rst
> --- a/Documentation/RCU/UP.rst
> +++ b/Documentation/RCU/UP.rst
> @@ -107,7 +107,7 @@ UP systems, including PREEMPT SMP builds
>
> Quick Quiz #3:
> Why can't synchronize_rcu() return immediately on UP systems running
> - preemptable RCU?
> + preemptible RCU?
>
> .. _answer_quick_quiz_up:
>
> @@ -143,7 +143,7 @@ Answer to Quick Quiz #2:
>
> Answer to Quick Quiz #3:
> Why can't synchronize_rcu() return immediately on UP systems
> - running preemptable RCU?
> + running preemptible RCU?
>
> Because some other task might have been preempted in the middle
> of an RCU read-side critical section. If synchronize_rcu()
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/9] Documentation: admin-guide: correct spelling
2023-01-29 23:10 ` [PATCH 1/9] Documentation: admin-guide: correct spelling Randy Dunlap
@ 2023-01-30 9:35 ` Mukesh Ojha
0 siblings, 0 replies; 24+ messages in thread
From: Mukesh Ojha @ 2023-01-30 9:35 UTC (permalink / raw)
To: Randy Dunlap, linux-kernel
Cc: Jonathan Corbet, linux-doc, Tejun Heo, Zefan Li, Johannes Weiner,
cgroups, Alasdair Kergon, Mike Snitzer, dm-devel,
Mauro Carvalho Chehab, linux-media, linux-mm
On 1/30/2023 4:40 AM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/admin-guide/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Cc: Tejun Heo <tj@kernel.org>
> Cc: Zefan Li <lizefan.x@bytedance.com>
> Cc: Johannes Weiner <hannes@cmpxchg.org>
> Cc: cgroups@vger.kernel.org
> Cc: Alasdair Kergon <agk@redhat.com>
> Cc: Mike Snitzer <snitzer@kernel.org>
> Cc: dm-devel@redhat.com
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: linux-media@vger.kernel.org
> Cc: linux-mm@kvack.org
> ---
> Documentation/admin-guide/bcache.rst | 2 +-
> Documentation/admin-guide/cgroup-v1/blkio-controller.rst | 2 +-
> Documentation/admin-guide/cgroup-v2.rst | 10 +++++-----
> Documentation/admin-guide/cifs/usage.rst | 4 ++--
> Documentation/admin-guide/device-mapper/cache-policies.rst | 2 +-
> Documentation/admin-guide/device-mapper/dm-ebs.rst | 2 +-
> Documentation/admin-guide/device-mapper/dm-zoned.rst | 2 +-
> Documentation/admin-guide/device-mapper/unstriped.rst | 10 +++++-----
> Documentation/admin-guide/dynamic-debug-howto.rst | 2 +-
> Documentation/admin-guide/gpio/gpio-sim.rst | 2 +-
> Documentation/admin-guide/hw-vuln/mds.rst | 4 ++--
> Documentation/admin-guide/kernel-parameters.txt | 8 ++++----
> Documentation/admin-guide/laptops/thinkpad-acpi.rst | 2 +-
> Documentation/admin-guide/md.rst | 2 +-
> Documentation/admin-guide/media/bttv.rst | 2 +-
> Documentation/admin-guide/media/building.rst | 2 +-
> Documentation/admin-guide/media/si476x.rst | 2 +-
> Documentation/admin-guide/media/vivid.rst | 2 +-
> Documentation/admin-guide/mm/hugetlbpage.rst | 2 +-
> Documentation/admin-guide/mm/numa_memory_policy.rst | 4 ++--
> Documentation/admin-guide/perf/hns3-pmu.rst | 2 +-
> Documentation/admin-guide/pm/amd-pstate.rst | 2 +-
> Documentation/admin-guide/spkguide.txt | 4 ++--
> Documentation/admin-guide/sysctl/vm.rst | 4 ++--
> Documentation/admin-guide/sysrq.rst | 2 +-
> 25 files changed, 41 insertions(+), 41 deletions(-)
>
> diff -- a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
> --- a/Documentation/admin-guide/cgroup-v2.rst
> +++ b/Documentation/admin-guide/cgroup-v2.rst
> @@ -624,7 +624,7 @@ and is an example of this type.
> Limits
> ------
>
> -A child can only consume upto the configured amount of the resource.
> +A child can only consume up to the configured amount of the resource.
> Limits can be over-committed - the sum of the limits of children can
> exceed the amount of resource available to the parent.
>
> @@ -642,11 +642,11 @@ on an IO device and is an example of thi
> Protections
> -----------
>
> -A cgroup is protected upto the configured amount of the resource
> +A cgroup is protected up to the configured amount of the resource
> as long as the usages of all its ancestors are under their
> protected levels. Protections can be hard guarantees or best effort
> soft boundaries. Protections can also be over-committed in which case
> -only upto the amount available to the parent is protected among
> +only up to the amount available to the parent is protected among
> children.
>
> Protections are in the range [0, max] and defaults to 0, which is
> @@ -1079,7 +1079,7 @@ All time durations are in microseconds.
>
> $MAX $PERIOD
>
> - which indicates that the group may consume upto $MAX in each
> + which indicates that the group may consume up to $MAX in each
> $PERIOD duration. "max" for $MAX indicates no limit. If only
> one number is written, $MAX is updated.
>
> @@ -2289,7 +2289,7 @@ Cpuset Interface Files
> For a valid partition root with the sibling cpu exclusivity
> rule enabled, changes made to "cpuset.cpus" that violate the
> exclusivity rule will invalidate the partition as well as its
> - sibiling partitions with conflicting cpuset.cpus values. So
> + sibling partitions with conflicting cpuset.cpus values. So
> care must be taking in changing "cpuset.cpus".
>
> A valid non-root parent partition may distribute out all its CPUs
> diff -- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
> --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
> +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
> @@ -1488,7 +1488,7 @@ Example of command to set keyboard langu
> Text corresponding to keyboard layout to be set in sysfs are: be(Belgian),
> cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian),
> fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan),
> -nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden),
> +nl(Dutch), nn(Norway), pl(Polish), pt(portuguese), sl(Slovenian), sv(Sweden),
> tr(Turkey)
>
> WWAN Antenna type
> diff -- a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst
> --- a/Documentation/admin-guide/md.rst
> +++ b/Documentation/admin-guide/md.rst
> @@ -317,7 +317,7 @@ All md devices contain:
> suspended (not supported yet)
> All IO requests will block. The array can be reconfigured.
>
> - Writing this, if accepted, will block until array is quiessent
> + Writing this, if accepted, will block until array is quiescent
>
> readonly
> no resync can happen. no superblocks get written.
> diff -- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
> --- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
> +++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
> @@ -106,7 +106,7 @@ Proportional weight policy files
> see Documentation/block/bfq-iosched.rst.
>
> blkio.bfq.weight_device
> - Specifes per cgroup per device weights, overriding the default group
> + Specifies per cgroup per device weights, overriding the default group
> weight. For more details, see Documentation/block/bfq-iosched.rst.
>
> Following is the format::
> diff -- a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
> --- a/Documentation/admin-guide/pm/amd-pstate.rst
> +++ b/Documentation/admin-guide/pm/amd-pstate.rst
> @@ -403,7 +403,7 @@ Unit Tests for amd-pstate
>
> * We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization.
>
> -1. Test case decriptions
> +1. Test case descriptions
>
> 1). Basic tests
>
> diff -- a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt
> --- a/Documentation/admin-guide/spkguide.txt
> +++ b/Documentation/admin-guide/spkguide.txt
> @@ -1105,8 +1105,8 @@ speakup load
> Alternatively, you can add the above line to your file
> ~/.bashrc or ~/.bash_profile.
>
> -If your system administrator ran himself the script, all the users will be able
> -to change from English to the language choosed by root and do directly
> +If your system administrator himself ran the script, all the users will be able
> +to change from English to the language chosen by root and do directly
> speakupconf load (or add this to the ~/.bashrc or
> ~/.bash_profile file). If there are several languages to handle, the
> administrator (or every user) will have to run the first steps until speakupconf
> diff -- a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst
> --- a/Documentation/admin-guide/device-mapper/cache-policies.rst
> +++ b/Documentation/admin-guide/device-mapper/cache-policies.rst
> @@ -70,7 +70,7 @@ the entries (each hotspot block covers a
> cache block).
>
> All this means smq uses ~25bytes per cache block. Still a lot of
> -memory, but a substantial improvement nontheless.
> +memory, but a substantial improvement nonetheless.
>
> Level balancing
> ^^^^^^^^^^^^^^^
> diff -- a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst
> --- a/Documentation/admin-guide/device-mapper/dm-ebs.rst
> +++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst
> @@ -31,7 +31,7 @@ Mandatory parameters:
>
> Optional parameter:
>
> - <underyling sectors>:
> + <underlying sectors>:
> Number of sectors defining the logical block size of <dev path>.
> 2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB.
> If not provided, the logical block size of <dev path> will be used.
> diff -- a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst
> --- a/Documentation/admin-guide/device-mapper/dm-zoned.rst
> +++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst
> @@ -46,7 +46,7 @@ just like conventional zones.
> The zones of the device(s) are separated into 2 types:
>
> 1) Metadata zones: these are conventional zones used to store metadata.
> -Metadata zones are not reported as useable capacity to the user.
> +Metadata zones are not reported as usable capacity to the user.
>
> 2) Data zones: all remaining zones, the vast majority of which will be
> sequential zones used exclusively to store user data. The conventional
> diff -- a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst
> --- a/Documentation/admin-guide/device-mapper/unstriped.rst
> +++ b/Documentation/admin-guide/device-mapper/unstriped.rst
> @@ -35,7 +35,7 @@ An example of undoing an existing dm-str
>
> This small bash script will setup 4 loop devices and use the existing
> striped target to combine the 4 devices into one. It then will use
> -the unstriped target ontop of the striped device to access the
> +the unstriped target on top of the striped device to access the
> individual backing loop devices. We write data to the newly exposed
> unstriped devices and verify the data written matches the correct
> underlying device on the striped array::
> @@ -110,8 +110,8 @@ to get a 92% reduction in read latency u
> Example dmsetup usage
> =====================
>
> -unstriped ontop of Intel NVMe device that has 2 cores
> ------------------------------------------------------
> +unstriped on top of Intel NVMe device that has 2 cores
> +------------------------------------------------------
>
> ::
>
> @@ -124,8 +124,8 @@ respectively::
> /dev/mapper/nvmset0
> /dev/mapper/nvmset1
>
> -unstriped ontop of striped with 4 drives using 128K chunk size
> ---------------------------------------------------------------
> +unstriped on top of striped with 4 drives using 128K chunk size
> +---------------------------------------------------------------
>
> ::
>
> diff -- a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst
> --- a/Documentation/admin-guide/hw-vuln/mds.rst
> +++ b/Documentation/admin-guide/hw-vuln/mds.rst
> @@ -64,8 +64,8 @@ architecture section: :ref:`Documentatio
> Attack scenarios
> ----------------
>
> -Attacks against the MDS vulnerabilities can be mounted from malicious non
> -priviledged user space applications running on hosts or guest. Malicious
> +Attacks against the MDS vulnerabilities can be mounted from malicious non-
> +privileged user space applications running on hosts or guest. Malicious
> guest OSes can obviously mount attacks as well.
>
> Contrary to other speculation based vulnerabilities the MDS vulnerability
> diff -- a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
> --- a/Documentation/admin-guide/sysctl/vm.rst
> +++ b/Documentation/admin-guide/sysctl/vm.rst
> @@ -356,7 +356,7 @@ The lowmem_reserve_ratio is an array. Yo
>
> But, these values are not used directly. The kernel calculates # of protection
> pages for each zones from them. These are shown as array of protection pages
> -in /proc/zoneinfo like followings. (This is an example of x86-64 box).
> +in /proc/zoneinfo like the following. (This is an example of x86-64 box).
> Each zone has an array of protection pages like this::
>
> Node 0, zone DMA
> @@ -433,7 +433,7 @@ a 2bit error in a memory module) is dete
> that cannot be handled by the kernel. In some cases (like the page
> still having a valid copy on disk) the kernel will handle the failure
> transparently without affecting any applications. But if there is
> -no other uptodate copy of the data it will kill to prevent any data
> +no other up-to-date copy of the data it will kill to prevent any data
> corruptions from propagating.
>
> 1: Kill all processes that have the corrupted and not reloadable page mapped
> diff -- a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
> --- a/Documentation/admin-guide/bcache.rst
> +++ b/Documentation/admin-guide/bcache.rst
> @@ -204,7 +204,7 @@ For example::
> This should present your unmodified backing device data in /dev/loop0
>
> If your cache is in writethrough mode, then you can safely discard the
> -cache device without loosing data.
> +cache device without losing data.
>
>
> E) Wiping a cache device
> diff -- a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst
> --- a/Documentation/admin-guide/sysrq.rst
> +++ b/Documentation/admin-guide/sysrq.rst
> @@ -138,7 +138,7 @@ Command Function
> ``v`` Forcefully restores framebuffer console
> ``v`` Causes ETM buffer dump [ARM-specific]
>
> -``w`` Dumps tasks that are in uninterruptable (blocked) state.
> +``w`` Dumps tasks that are in uninterruptible (blocked) state.
>
> ``x`` Used by xmon interface on ppc/powerpc platforms.
> Show global PMU Registers on sparc64.
> diff -- a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst
> --- a/Documentation/admin-guide/cifs/usage.rst
> +++ b/Documentation/admin-guide/cifs/usage.rst
> @@ -399,7 +399,7 @@ A partial list of the supported mount op
> sep
> if first mount option (after the -o), overrides
> the comma as the separator between the mount
> - parms. e.g.::
> + parameters. e.g.::
>
> -o user=myname,password=mypassword,domain=mydom
>
> @@ -765,7 +765,7 @@ cifsFYI If set to non-zero value, addi
> Some debugging statements are not compiled into the
> cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the
> kernel configuration. cifsFYI may be set to one or
> - nore of the following flags (7 sets them all)::
> + more of the following flags (7 sets them all)::
>
> +-----------------------------------------------+------+
> | log cifs informational messages | 0x01 |
> diff -- a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
> --- a/Documentation/admin-guide/dynamic-debug-howto.rst
> +++ b/Documentation/admin-guide/dynamic-debug-howto.rst
> @@ -330,7 +330,7 @@ Examples
>
> // boot-args example, with newlines and comments for readability
> Kernel command line: ...
> - // see whats going on in dyndbg=value processing
> + // see what's going on in dyndbg=value processing
> dynamic_debug.verbose=3
> // enable pr_debugs in the btrfs module (can be builtin or loadable)
> btrfs.dyndbg="+p"
> diff -- a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
> --- a/Documentation/admin-guide/mm/hugetlbpage.rst
> +++ b/Documentation/admin-guide/mm/hugetlbpage.rst
> @@ -86,7 +86,7 @@ by increasing or decreasing the value of
>
> Note: When the feature of freeing unused vmemmap pages associated with each
> hugetlb page is enabled, we can fail to free the huge pages triggered by
> -the user when ths system is under memory pressure. Please try again later.
> +the user when the system is under memory pressure. Please try again later.
My eye almost missed 'ths' :-)
>
> Pages that are used as huge pages are reserved inside the kernel and cannot
> be used for other purposes. Huge pages cannot be swapped out under
> diff -- a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
> --- a/Documentation/admin-guide/mm/numa_memory_policy.rst
> +++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
> @@ -246,7 +246,7 @@ MPOL_INTERLEAVED
> interleaved system default policy works in this mode.
>
> MPOL_PREFERRED_MANY
> - This mode specifices that the allocation should be preferrably
> + This mode specifies that the allocation should be preferably
> satisfied from the nodemask specified in the policy. If there is
> a memory pressure on all nodes in the nodemask, the allocation
> can fall back to all existing numa nodes. This is effectively
> @@ -360,7 +360,7 @@ and NUMA nodes. "Usage" here means one
> 2) examination of the policy to determine the policy mode and associated node
> or node lists, if any, for page allocation. This is considered a "hot
> path". Note that for MPOL_BIND, the "usage" extends across the entire
> - allocation process, which may sleep during page reclaimation, because the
> + allocation process, which may sleep during page reclamation, because the
> BIND policy nodemask is used, by reference, to filter ineligible nodes.
>
> We can avoid taking an extra reference during the usages listed above as
> diff -- a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst
> --- a/Documentation/admin-guide/gpio/gpio-sim.rst
> +++ b/Documentation/admin-guide/gpio/gpio-sim.rst
> @@ -123,7 +123,7 @@ Each simulated GPIO chip creates a separ
> directory for each exposed line
> (e.g. ``/sys/devices/platform/gpio-sim.X/gpiochipY/``). The name of each group
> is of the form: ``'sim_gpioX'`` where X is the offset of the line. Inside each
> -group there are two attibutes:
> +group there are two attributes:
>
> ``pull`` - allows to read and set the current simulated pull setting for
> every line, when writing the value must be one of: ``'pull-up'``,
> diff -- a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -676,7 +676,7 @@
> Sets the size of kernel per-numa memory area for
> contiguous memory allocations. A value of 0 disables
> per-numa CMA altogether. And If this option is not
> - specificed, the default value is 0.
> + specified, the default value is 0.
> With per-numa CMA enabled, DMA users on node nid will
> first try to allocate buffer from the pernuma area
> which is located in node nid, if the allocation fails,
> @@ -946,7 +946,7 @@
> driver code when a CPU writes to (or reads from) a
> random memory location. Note that there exists a class
> of memory corruptions problems caused by buggy H/W or
> - F/W or by drivers badly programing DMA (basically when
> + F/W or by drivers badly programming DMA (basically when
> memory is written at bus level and the CPU MMU is
> bypassed) which are not detectable by
> CONFIG_DEBUG_PAGEALLOC, hence this option will not help
> @@ -1732,7 +1732,7 @@
> boot-time allocation of gigantic hugepages is skipped.
>
> hugetlb_free_vmemmap=
> - [KNL] Reguires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
> + [KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
> enabled.
> Control if HugeTLB Vmemmap Optimization (HVO) is enabled.
> Allows heavy hugetlb users to free up some more
> @@ -3693,7 +3693,7 @@
> implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
> to be effective. This is useful on platforms where the
> sleep(SH) or wfi(ARM,ARM64) instructions do not work
> - correctly or when doing power measurements to evalute
> + correctly or when doing power measurements to evaluate
> the impact of the sleep instructions. This is also
> useful when using JTAG debugger.
>
> diff -- a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst
> --- a/Documentation/admin-guide/perf/hns3-pmu.rst
> +++ b/Documentation/admin-guide/perf/hns3-pmu.rst
> @@ -53,7 +53,7 @@ two events have same value of bits 0~15
> event pair. And the bit 16 of config indicates getting counter 0 or
> counter 1 of hardware event.
>
> -After getting two values of event pair in usersapce, the formula of
> +After getting two values of event pair in userspace, the formula of
> computation to calculate real performance data is:::
>
> counter 0 / counter 1
> diff -- a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst
> --- a/Documentation/admin-guide/media/bttv.rst
> +++ b/Documentation/admin-guide/media/bttv.rst
> @@ -909,7 +909,7 @@ DE hat diverse Treiber fuer diese Modell
> - TVPhone98 (Bt878)
> - AVerTV und TVCapture98 w/VCR (Bt 878)
> - AVerTVStudio und TVPhone98 w/VCR (Bt878)
> - - AVerTV GO Serie (Kein SVideo Input)
> + - AVerTV GO Series (Kein SVideo Input)
> - AVerTV98 (BT-878 chip)
> - AVerTV98 mit Fernbedienung (BT-878 chip)
> - AVerTV/FM98 (BT-878 chip)
> diff -- a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst
> --- a/Documentation/admin-guide/media/building.rst
> +++ b/Documentation/admin-guide/media/building.rst
> @@ -137,7 +137,7 @@ The ``LIRC user interface`` option adds
> from remote controllers.
>
> The ``Support for eBPF programs attached to lirc devices`` option allows
> -the usage of special programs (called eBPF) that would allow aplications
> +the usage of special programs (called eBPF) that would allow applications
> to add extra remote controller decoding functionality to the Linux Kernel.
>
> The ``Remote controller decoders`` option allows selecting the
> diff -- a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst
> --- a/Documentation/admin-guide/media/si476x.rst
> +++ b/Documentation/admin-guide/media/si476x.rst
> @@ -142,7 +142,7 @@ The drivers exposes following files:
> indicator
> 0x18 lassi Signed Low side adjacent Channel
> Strength indicator
> - 0x19 hassi ditto fpr High side
> + 0x19 hassi ditto for High side
> 0x20 mult Multipath indicator
> 0x21 dev Frequency deviation
> 0x24 assi Adjacent channel SSI
> diff -- a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst
> --- a/Documentation/admin-guide/media/vivid.rst
> +++ b/Documentation/admin-guide/media/vivid.rst
> @@ -580,7 +580,7 @@ Metadata Capture
> ----------------
>
> The Metadata capture generates UVC format metadata. The PTS and SCR are
> -transmitted based on the values set in vivid contols.
> +transmitted based on the values set in vivid controls.
>
> The Metadata device will only work for the Webcam input, it will give
> back an error for all other inputs.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
-Mukesh
^ permalink raw reply [flat|nested] 24+ messages in thread
* RE: [PATCH 2/9] Documentation: driver-api: correct spelling
2023-01-29 23:10 ` [PATCH 2/9] Documentation: driver-api: " Randy Dunlap
@ 2023-01-30 19:11 ` Dan Williams
2023-01-30 19:45 ` Song Liu
2023-01-31 9:10 ` Greg Kroah-Hartman
2 siblings, 0 replies; 24+ messages in thread
From: Dan Williams @ 2023-01-30 19:11 UTC (permalink / raw)
To: Randy Dunlap, linux-kernel
Cc: Randy Dunlap, Jonathan Corbet, linux-doc, Mauro Carvalho Chehab,
linux-media, Dan Williams, Vishal Verma, Dave Jiang, nvdimm,
Vinod Koul, dmaengine, Song Liu, linux-raid, Greg Kroah-Hartman,
linux-usb
Randy Dunlap wrote:
> Correct spelling problems for Documentation/driver-api/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: linux-media@vger.kernel.org
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Vishal Verma <vishal.l.verma@intel.com>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: nvdimm@lists.linux.dev
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: dmaengine@vger.kernel.org
> Cc: Song Liu <song@kernel.org>
> Cc: linux-raid@vger.kernel.org
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> ---
> Documentation/driver-api/nvdimm/nvdimm.rst | 2 +-
> Documentation/driver-api/nvdimm/security.rst | 2 +-
For the nvdimm bits,
Acked-by: Dan Williams <dan.j.williams@intel.com>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/9] Documentation: driver-api: correct spelling
2023-01-29 23:10 ` [PATCH 2/9] Documentation: driver-api: " Randy Dunlap
2023-01-30 19:11 ` Dan Williams
@ 2023-01-30 19:45 ` Song Liu
2023-01-31 9:10 ` Greg Kroah-Hartman
2 siblings, 0 replies; 24+ messages in thread
From: Song Liu @ 2023-01-30 19:45 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-kernel, Jonathan Corbet, linux-doc, Mauro Carvalho Chehab,
linux-media, Dan Williams, Vishal Verma, Dave Jiang, nvdimm,
Vinod Koul, dmaengine, linux-raid, Greg Kroah-Hartman, linux-usb
On Sun, Jan 29, 2023 at 3:11 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> Correct spelling problems for Documentation/driver-api/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: linux-media@vger.kernel.org
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Vishal Verma <vishal.l.verma@intel.com>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: nvdimm@lists.linux.dev
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: dmaengine@vger.kernel.org
> Cc: Song Liu <song@kernel.org>
> Cc: linux-raid@vger.kernel.org
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> ---
[...]
> Documentation/driver-api/md/md-cluster.rst | 2 +-
> Documentation/driver-api/md/raid5-cache.rst | 2 +-
For md bits:
Acked-by: Song Liu <song@kernel.org>
[...]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/9] Documentation: driver-api: correct spelling
2023-01-29 23:10 ` [PATCH 2/9] Documentation: driver-api: " Randy Dunlap
2023-01-30 19:11 ` Dan Williams
2023-01-30 19:45 ` Song Liu
@ 2023-01-31 9:10 ` Greg Kroah-Hartman
2 siblings, 0 replies; 24+ messages in thread
From: Greg Kroah-Hartman @ 2023-01-31 9:10 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-kernel, Jonathan Corbet, linux-doc, Mauro Carvalho Chehab,
linux-media, Dan Williams, Vishal Verma, Dave Jiang, nvdimm,
Vinod Koul, dmaengine, Song Liu, linux-raid, linux-usb
On Sun, Jan 29, 2023 at 03:10:46PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/driver-api/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: linux-media@vger.kernel.org
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Vishal Verma <vishal.l.verma@intel.com>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: nvdimm@lists.linux.dev
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: dmaengine@vger.kernel.org
> Cc: Song Liu <song@kernel.org>
> Cc: linux-raid@vger.kernel.org
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> ---
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (8 preceding siblings ...)
2023-01-29 23:10 ` [PATCH 9/9] Documentation: userspace-api: " Randy Dunlap
@ 2023-01-31 12:10 ` patchwork-bot+netdevbpf
2023-01-31 12:17 ` Paolo Abeni
2023-02-02 18:09 ` Jonathan Corbet
2023-02-14 16:57 ` (subset) " Martin K. Petersen
11 siblings, 1 reply; 24+ messages in thread
From: patchwork-bot+netdevbpf @ 2023-01-31 12:10 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-kernel, corbet, linux-doc, tj, lizefan.x, hannes, cgroups,
agk, snitzer, dm-devel, mchehab, linux-media, linux-mm,
dan.j.williams, vishal.l.verma, dave.jiang, nvdimm, vkoul,
dmaengine, song, linux-raid, gregkh, linux-usb, jdelvare, linux,
linux-hwmon, jiri, davem, edumazet, kuba, pabeni, netdev,
paulmck, frederic, quic_neeraju, josh, rcu, jejb,
martin.petersen, linux-scsi, sparclinux
Hello:
This patch was applied to netdev/net-next.git (master)
by Paolo Abeni <pabeni@redhat.com>:
On Sun, 29 Jan 2023 15:10:44 -0800 you wrote:
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
>
> These patches are based on linux-next-20230127.
>
>
> [PATCH 1/9] Documentation: admin-guide: correct spelling
> [PATCH 2/9] Documentation: driver-api: correct spelling
> [PATCH 3/9] Documentation: hwmon: correct spelling
> [PATCH 4/9] Documentation: networking: correct spelling
> [PATCH 5/9] Documentation: RCU: correct spelling
> [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
> [PATCH 7/9] Documentation: scsi: correct spelling
> [PATCH 8/9] Documentation: sparc: correct spelling
> [PATCH 9/9] Documentation: userspace-api: correct spelling
>
> [...]
Here is the summary with links:
- [4/9] Documentation: networking: correct spelling
https://git.kernel.org/netdev/net-next/c/a266ef69b890
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-01-31 12:10 ` [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) patchwork-bot+netdevbpf
@ 2023-01-31 12:17 ` Paolo Abeni
0 siblings, 0 replies; 24+ messages in thread
From: Paolo Abeni @ 2023-01-31 12:17 UTC (permalink / raw)
To: patchwork-bot+netdevbpf, Randy Dunlap
Cc: linux-kernel, corbet, linux-doc, tj, lizefan.x, hannes, cgroups,
agk, snitzer, dm-devel, mchehab, linux-media, linux-mm,
dan.j.williams, vishal.l.verma, dave.jiang, nvdimm, vkoul,
dmaengine, song, linux-raid, gregkh, linux-usb, jdelvare, linux,
linux-hwmon, jiri, davem, edumazet, kuba, netdev, paulmck,
frederic, quic_neeraju, josh, rcu, jejb, martin.petersen,
linux-scsi, sparclinux
On Tue, 2023-01-31 at 12:10 +0000, patchwork-bot+netdevbpf@kernel.org
wrote:
> Hello:
>
> This patch was applied to netdev/net-next.git (master)
> by Paolo Abeni <pabeni@redhat.com>:
>
> On Sun, 29 Jan 2023 15:10:44 -0800 you wrote:
> > Maintainers of specific kernel subsystems are only Cc-ed on their
> > respective patches, not the entire series. [if all goes well]
> >
> > These patches are based on linux-next-20230127.
> >
> >
> > [PATCH 1/9] Documentation: admin-guide: correct spelling
> > [PATCH 2/9] Documentation: driver-api: correct spelling
> > [PATCH 3/9] Documentation: hwmon: correct spelling
> > [PATCH 4/9] Documentation: networking: correct spelling
> > [PATCH 5/9] Documentation: RCU: correct spelling
> > [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
> > [PATCH 7/9] Documentation: scsi: correct spelling
> > [PATCH 8/9] Documentation: sparc: correct spelling
> > [PATCH 9/9] Documentation: userspace-api: correct spelling
> >
> > [...]
>
> Here is the summary with links:
> - [4/9] Documentation: networking: correct spelling
> https://git.kernel.org/netdev/net-next/c/a266ef69b890
>
> You are awesome, thank you!
That is just a bot glitch. I actually applied only patch 4/9 to the
net-next tree. I hope this is not too much scarying/confusing.
Thanks,
Paolo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (9 preceding siblings ...)
2023-01-31 12:10 ` [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) patchwork-bot+netdevbpf
@ 2023-02-02 18:09 ` Jonathan Corbet
2023-02-02 18:33 ` Randy Dunlap
2023-02-14 16:57 ` (subset) " Martin K. Petersen
11 siblings, 1 reply; 24+ messages in thread
From: Jonathan Corbet @ 2023-02-02 18:09 UTC (permalink / raw)
To: Randy Dunlap, linux-kernel
Cc: Randy Dunlap, linux-doc, Tejun Heo, Zefan Li, Johannes Weiner,
cgroups, Alasdair Kergon, Mike Snitzer, dm-devel,
Mauro Carvalho Chehab, linux-media, linux-mm, Dan Williams,
Vishal Verma, Dave Jiang, nvdimm, Vinod Koul, dmaengine,
Song Liu, linux-raid, Greg Kroah-Hartman, linux-usb,
Jean Delvare, Guenter Roeck, linux-hwmon, Jiri Pirko,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
netdev, Paul E. McKenney, Frederic Weisbecker, Neeraj Upadhyay,
Josh Triplett, rcu, James E.J. Bottomley, Martin K. Petersen,
linux-scsi, sparclinux
Randy Dunlap <rdunlap@infradead.org> writes:
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
>
> These patches are based on linux-next-20230127.
So I've applied a bunch of these
> [PATCH 1/9] Documentation: admin-guide: correct spelling
> [PATCH 2/9] Documentation: driver-api: correct spelling
applied
> [PATCH 3/9] Documentation: hwmon: correct spelling
> [PATCH 4/9] Documentation: networking: correct spelling
> [PATCH 5/9] Documentation: RCU: correct spelling
These have been taken up elsewhere
> [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
> [PATCH 7/9] Documentation: scsi: correct spelling
I've left these for the SCSI folks for now. Do we *really* want to be
fixing spelling in ChangeLog files from almost 20 years ago?
> [PATCH 8/9] Documentation: sparc: correct spelling
> [PATCH 9/9] Documentation: userspace-api: correct spelling
Applied.
Thanks,
jon
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-02-02 18:09 ` Jonathan Corbet
@ 2023-02-02 18:33 ` Randy Dunlap
2023-02-02 18:39 ` [dm-devel] " Bart Van Assche
0 siblings, 1 reply; 24+ messages in thread
From: Randy Dunlap @ 2023-02-02 18:33 UTC (permalink / raw)
To: Jonathan Corbet, linux-kernel
Cc: linux-doc, Tejun Heo, Zefan Li, Johannes Weiner, cgroups,
Alasdair Kergon, Mike Snitzer, dm-devel, Mauro Carvalho Chehab,
linux-media, linux-mm, Dan Williams, Vishal Verma, Dave Jiang,
nvdimm, Vinod Koul, dmaengine, Song Liu, linux-raid,
Greg Kroah-Hartman, linux-usb, Jean Delvare, Guenter Roeck,
linux-hwmon, Jiri Pirko, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, netdev, Paul E. McKenney,
Frederic Weisbecker, Neeraj Upadhyay, Josh Triplett, rcu,
James E.J. Bottomley, Martin K. Petersen, linux-scsi, sparclinux
On 2/2/23 10:09, Jonathan Corbet wrote:
> Randy Dunlap <rdunlap@infradead.org> writes:
>
>> Maintainers of specific kernel subsystems are only Cc-ed on their
>> respective patches, not the entire series. [if all goes well]
>>
>> These patches are based on linux-next-20230127.
>
> So I've applied a bunch of these
>
>> [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
>> [PATCH 7/9] Documentation: scsi: correct spelling
>
> I've left these for the SCSI folks for now. Do we *really* want to be
> fixing spelling in ChangeLog files from almost 20 years ago?
That's why I made it a separate patch -- so the SCSI folks can decide that...
--
~Randy
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dm-devel] [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-02-02 18:33 ` Randy Dunlap
@ 2023-02-02 18:39 ` Bart Van Assche
2023-02-02 18:46 ` Jonathan Corbet
0 siblings, 1 reply; 24+ messages in thread
From: Bart Van Assche @ 2023-02-02 18:39 UTC (permalink / raw)
To: Randy Dunlap, Jonathan Corbet, linux-kernel
Cc: nvdimm, linux-doc, Song Liu, dm-devel, netdev, Zefan Li,
sparclinux, Neeraj Upadhyay, Alasdair Kergon, Dave Jiang,
linux-scsi, Vishal Verma, Jakub Kicinski, Paolo Abeni,
James E.J. Bottomley, Guenter Roeck, linux-media, Jean Delvare,
Paul E. McKenney, Frederic Weisbecker, Mike Snitzer,
Josh Triplett, linux-raid, Tejun Heo, Jiri Pirko, cgroups,
Dan Williams, Mauro Carvalho Chehab, linux-hwmon, rcu,
Martin K. Petersen, linux-mm, Greg Kroah-Hartman, linux-usb,
Eric Dumazet, Vinod Koul, Johannes Weiner, dmaengine,
David S. Miller
On 2/2/23 10:33, Randy Dunlap wrote:
> On 2/2/23 10:09, Jonathan Corbet wrote:
>> Randy Dunlap <rdunlap@infradead.org> writes:
>>> [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
>>> [PATCH 7/9] Documentation: scsi: correct spelling
>>
>> I've left these for the SCSI folks for now. Do we *really* want to be
>> fixing spelling in ChangeLog files from almost 20 years ago?
>
> That's why I made it a separate patch -- so the SCSI folks can decide that...
How about removing the Documentation/scsi/ChangeLog.* files? I'm not
sure these changelogs are still useful since these duplicate information
that is already available in the output of git log ${driver_directory}.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dm-devel] [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-02-02 18:39 ` [dm-devel] " Bart Van Assche
@ 2023-02-02 18:46 ` Jonathan Corbet
2023-02-02 18:54 ` James Bottomley
0 siblings, 1 reply; 24+ messages in thread
From: Jonathan Corbet @ 2023-02-02 18:46 UTC (permalink / raw)
To: Bart Van Assche, Randy Dunlap, linux-kernel
Cc: nvdimm, linux-doc, Song Liu, dm-devel, netdev, Zefan Li,
sparclinux, Neeraj Upadhyay, Alasdair Kergon, Dave Jiang,
linux-scsi, Vishal Verma, Jakub Kicinski, Paolo Abeni,
James E.J. Bottomley, Guenter Roeck, linux-media, Jean Delvare,
Paul E. McKenney, Frederic Weisbecker, Mike Snitzer,
Josh Triplett, linux-raid, Tejun Heo, Jiri Pirko, cgroups,
Dan Williams, Mauro Carvalho Chehab, linux-hwmon, rcu,
Martin K. Petersen, linux-mm, Greg Kroah-Hartman, linux-usb,
Eric Dumazet, Vinod Koul, Johannes Weiner, dmaengine,
David S. Miller
Bart Van Assche <bvanassche@acm.org> writes:
> On 2/2/23 10:33, Randy Dunlap wrote:
>> On 2/2/23 10:09, Jonathan Corbet wrote:
>>> Randy Dunlap <rdunlap@infradead.org> writes:
>>>> [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
>>>> [PATCH 7/9] Documentation: scsi: correct spelling
>>>
>>> I've left these for the SCSI folks for now. Do we *really* want to be
>>> fixing spelling in ChangeLog files from almost 20 years ago?
>>
>> That's why I made it a separate patch -- so the SCSI folks can decide that...
>
> How about removing the Documentation/scsi/ChangeLog.* files? I'm not
> sure these changelogs are still useful since these duplicate information
> that is already available in the output of git log ${driver_directory}.
Actually, the information in those files mostly predates the git era, so
you won't find it that way. I *still* question their value, though...
jon
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dm-devel] [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-02-02 18:46 ` Jonathan Corbet
@ 2023-02-02 18:54 ` James Bottomley
0 siblings, 0 replies; 24+ messages in thread
From: James Bottomley @ 2023-02-02 18:54 UTC (permalink / raw)
To: Jonathan Corbet, Bart Van Assche, Randy Dunlap, linux-kernel
Cc: nvdimm, linux-doc, Song Liu, dm-devel, netdev, Zefan Li,
sparclinux, Neeraj Upadhyay, Alasdair Kergon, Dave Jiang,
linux-scsi, Vishal Verma, Jakub Kicinski, Paolo Abeni,
Guenter Roeck, linux-media, Jean Delvare, Paul E. McKenney,
Frederic Weisbecker, Mike Snitzer, Josh Triplett, linux-raid,
Tejun Heo, Jiri Pirko, cgroups, Dan Williams,
Mauro Carvalho Chehab, linux-hwmon, rcu, Martin K. Petersen,
linux-mm, Greg Kroah-Hartman, linux-usb, Eric Dumazet,
Vinod Koul, Johannes Weiner, dmaengine, David S. Miller
On Thu, 2023-02-02 at 11:46 -0700, Jonathan Corbet wrote:
> Bart Van Assche <bvanassche@acm.org> writes:
>
> > On 2/2/23 10:33, Randy Dunlap wrote:
> > > On 2/2/23 10:09, Jonathan Corbet wrote:
> > > > Randy Dunlap <rdunlap@infradead.org> writes:
> > > > > [PATCH 6/9] Documentation: scsi/ChangeLog*: correct
> > > > > spelling
> > > > > [PATCH 7/9] Documentation: scsi: correct spelling
> > > >
> > > > I've left these for the SCSI folks for now. Do we *really*
> > > > want to be
> > > > fixing spelling in ChangeLog files from almost 20 years ago?
> > >
> > > That's why I made it a separate patch -- so the SCSI folks can
> > > decide that...
> >
> > How about removing the Documentation/scsi/ChangeLog.* files? I'm
> > not sure these changelogs are still useful since these duplicate
> > information that is already available in the output of git log
> > ${driver_directory}.
>
> Actually, the information in those files mostly predates the git era,
> so you won't find it that way. I *still* question their value,
> though...
In the pre-source control days they were the answer to the GPLv2
Section 2 requirement to " carry prominent notices stating that you
changed the files and the date of any change."
If you remove the files you may run afoul of the GPLv2 Section 1
requirement to "keep intact all the notices that refer to this
License". Of course, nowadays we assume the source control does this
for us, so people rarely think of these requirements, but for files
that predate source control I think you need to consider the licence
implications.
James
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: (subset) [PATCH 0/9] Documentation: correct lots of spelling errors (series 2)
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
` (10 preceding siblings ...)
2023-02-02 18:09 ` Jonathan Corbet
@ 2023-02-14 16:57 ` Martin K. Petersen
11 siblings, 0 replies; 24+ messages in thread
From: Martin K. Petersen @ 2023-02-14 16:57 UTC (permalink / raw)
To: linux-kernel, Randy Dunlap
Cc: Martin K . Petersen, Jonathan Corbet, linux-doc, Tejun Heo,
Zefan Li, Johannes Weiner, cgroups, Alasdair Kergon,
Mike Snitzer, dm-devel, Mauro Carvalho Chehab, linux-media,
linux-mm, Dan Williams, Vishal Verma, Dave Jiang, nvdimm,
Vinod Koul, dmaengine, Song Liu, linux-raid, Greg Kroah-Hartman,
linux-usb, Jean Delvare, Guenter Roeck, linux-hwmon, Jiri Pirko,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
netdev, Paul E. McKenney, Frederic Weisbecker, Neeraj Upadhyay,
Josh Triplett, rcu, James E.J. Bottomley, linux-scsi, sparclinux
On Sun, 29 Jan 2023 15:10:44 -0800, Randy Dunlap wrote:
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
>
> These patches are based on linux-next-20230127.
>
>
> [PATCH 1/9] Documentation: admin-guide: correct spelling
> [PATCH 2/9] Documentation: driver-api: correct spelling
> [PATCH 3/9] Documentation: hwmon: correct spelling
> [PATCH 4/9] Documentation: networking: correct spelling
> [PATCH 5/9] Documentation: RCU: correct spelling
> [PATCH 6/9] Documentation: scsi/ChangeLog*: correct spelling
> [PATCH 7/9] Documentation: scsi: correct spelling
> [PATCH 8/9] Documentation: sparc: correct spelling
> [PATCH 9/9] Documentation: userspace-api: correct spelling
>
> [...]
Applied to 6.3/scsi-queue, thanks!
[6/9] Documentation: scsi/ChangeLog*: correct spelling
https://git.kernel.org/mkp/scsi/c/685d5ef436a9
[7/9] Documentation: scsi: correct spelling
https://git.kernel.org/mkp/scsi/c/cf065a7da517
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2023-02-14 16:59 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-29 23:10 [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) Randy Dunlap
2023-01-29 23:10 ` [PATCH 1/9] Documentation: admin-guide: correct spelling Randy Dunlap
2023-01-30 9:35 ` Mukesh Ojha
2023-01-29 23:10 ` [PATCH 2/9] Documentation: driver-api: " Randy Dunlap
2023-01-30 19:11 ` Dan Williams
2023-01-30 19:45 ` Song Liu
2023-01-31 9:10 ` Greg Kroah-Hartman
2023-01-29 23:10 ` [PATCH 3/9] Documentation: hwmon: " Randy Dunlap
2023-01-30 0:39 ` Guenter Roeck
2023-01-29 23:10 ` [PATCH 4/9] Documentation: networking: " Randy Dunlap
2023-01-29 23:10 ` [PATCH 5/9] Documentation: RCU: " Randy Dunlap
2023-01-30 5:24 ` Paul E. McKenney
2023-01-29 23:10 ` [PATCH 6/9] Documentation: scsi/ChangeLog*: " Randy Dunlap
2023-01-29 23:10 ` [PATCH 7/9] Documentation: scsi: " Randy Dunlap
2023-01-29 23:10 ` [PATCH 8/9] Documentation: sparc: " Randy Dunlap
2023-01-29 23:10 ` [PATCH 9/9] Documentation: userspace-api: " Randy Dunlap
2023-01-31 12:10 ` [PATCH 0/9] Documentation: correct lots of spelling errors (series 2) patchwork-bot+netdevbpf
2023-01-31 12:17 ` Paolo Abeni
2023-02-02 18:09 ` Jonathan Corbet
2023-02-02 18:33 ` Randy Dunlap
2023-02-02 18:39 ` [dm-devel] " Bart Van Assche
2023-02-02 18:46 ` Jonathan Corbet
2023-02-02 18:54 ` James Bottomley
2023-02-14 16:57 ` (subset) " Martin K. Petersen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).