* [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits
@ 2023-05-10 20:50 Sasha Levin
2023-05-10 20:50 ` [PATCH AUTOSEL 5.10 2/2] mfd: dln2: Fix memory leak in dln2_probe() Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: Sasha Levin @ 2023-05-10 20:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alain Volmat, Patrice Chotard, Vinod Koul, Sasha Levin, kishon,
linux-arm-kernel, linux-phy
From: Alain Volmat <avolmat@me.com>
[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]
This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
1 file changed, 10 insertions(+), 32 deletions(-)
diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5cc..e30305b77f0d1 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 val;
/* Waiting for Compensation to complete */
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
- if (time_after_eq(jiffies, finish))
- return -EBUSY;
- cpu_relax();
- } while (!(val & COMP_DONE));
-
- return 0;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+ val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
}
@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 mask = HFC_PLL | HFC_RDY;
u8 val;
@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
if (miphy_phy->type == PHY_TYPE_SATA)
mask |= PHY_RDY;
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
- if ((val & mask) != mask)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+ val, (val & mask) == mask, 1,
+ 5 * USEC_PER_SEC);
}
static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
{
struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
- unsigned long finish = jiffies + 5 * HZ;
u32 val;
if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
return -EINVAL;
- do {
- regmap_read(miphy_dev->regmap,
- miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
- if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return regmap_read_poll_timeout(miphy_dev->regmap,
+ miphy_phy->syscfg_reg[SYSCFG_STATUS],
+ val, val & MIPHY_OSC_RDY, 1,
+ 5 * USEC_PER_SEC);
}
static int miphy28lp_get_resource_byname(struct device_node *child,
--
2.39.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH AUTOSEL 5.10 2/2] mfd: dln2: Fix memory leak in dln2_probe()
2023-05-10 20:50 [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits Sasha Levin
@ 2023-05-10 20:50 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2023-05-10 20:50 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Qiang Ning, Lee Jones, Sasha Levin
From: Qiang Ning <qning0106@126.com>
[ Upstream commit 96da8f148396329ba769246cb8ceaa35f1ddfc48 ]
When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets
to call usb_put_dev() to decrease the refcount of dln2->usb_dev.
Fix this by adding usb_put_dev() in the error handling code of
dln2_probe().
Signed-off-by: Qiang Ning <qning0106@126.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/dln2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 852129ea07666..fc65f9e25fda8 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -836,6 +836,7 @@ static int dln2_probe(struct usb_interface *interface,
dln2_stop_rx_urbs(dln2);
out_free:
+ usb_put_dev(dln2->usb_dev);
dln2_free(dln2);
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-05-10 20:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-10 20:50 [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits Sasha Levin
2023-05-10 20:50 ` [PATCH AUTOSEL 5.10 2/2] mfd: dln2: Fix memory leak in dln2_probe() Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).