[PATCH v5 12/22] interconnect: qcom: msm8996: Hook up RPM bus clk definitions

[Konrad Dybcio <konrad.dybcio@linaro.org>]

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/msm8996.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/interconnect/qcom/msm8996.c b/drivers/interconnect/qcom/msm8996.c
index 1f7e88a37acd..a596f4035d2e 100644
--- a/drivers/interconnect/qcom/msm8996.c
+++ b/drivers/interconnect/qcom/msm8996.c
@@ -1840,6 +1840,7 @@ static const struct qcom_icc_desc msm8996_a1noc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = a1noc_nodes,
 	.num_nodes = ARRAY_SIZE(a1noc_nodes),
+	.bus_clk_desc = &aggre1_branch_clk,
 	.regmap_cfg = &msm8996_a1noc_regmap_config
 };
 
@@ -1861,6 +1862,7 @@ static const struct qcom_icc_desc msm8996_a2noc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = a2noc_nodes,
 	.num_nodes = ARRAY_SIZE(a2noc_nodes),
+	.bus_clk_desc = &aggre2_branch_clk,
 	.intf_clocks = a2noc_intf_clocks,
 	.num_intf_clocks = ARRAY_SIZE(a2noc_intf_clocks),
 	.regmap_cfg = &msm8996_a2noc_regmap_config
@@ -1889,6 +1891,7 @@ static const struct qcom_icc_desc msm8996_bimc = {
 	.type = QCOM_ICC_BIMC,
 	.nodes = bimc_nodes,
 	.num_nodes = ARRAY_SIZE(bimc_nodes),
+	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &msm8996_bimc_regmap_config
 };
 
@@ -1947,6 +1950,7 @@ static const struct qcom_icc_desc msm8996_cnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = cnoc_nodes,
 	.num_nodes = ARRAY_SIZE(cnoc_nodes),
+	.bus_clk_desc = &bus_2_clk,
 	.regmap_cfg = &msm8996_cnoc_regmap_config
 };
 
@@ -2000,6 +2004,7 @@ static const struct qcom_icc_desc msm8996_mnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = mnoc_nodes,
 	.num_nodes = ARRAY_SIZE(mnoc_nodes),
+	.bus_clk_desc = &mmaxi_0_clk,
 	.intf_clocks = mm_intf_clocks,
 	.num_intf_clocks = ARRAY_SIZE(mm_intf_clocks),
 	.regmap_cfg = &msm8996_mnoc_regmap_config
@@ -2038,6 +2043,7 @@ static const struct qcom_icc_desc msm8996_pnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = pnoc_nodes,
 	.num_nodes = ARRAY_SIZE(pnoc_nodes),
+	.bus_clk_desc = &bus_0_clk,
 	.regmap_cfg = &msm8996_pnoc_regmap_config
 };
 
@@ -2082,6 +2088,7 @@ static const struct qcom_icc_desc msm8996_snoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = snoc_nodes,
 	.num_nodes = ARRAY_SIZE(snoc_nodes),
+	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &msm8996_snoc_regmap_config
 };
 

-- 
2.41.0