[PATCH V1 0/4] irqchip/loongson: Fix some loongson irqchip drivers

[PATCH V1 0/4] irqchip/loongson: Fix some loongson irqchip drivers

[Jianmin Lv]

The patch series provide some fixes for loongson-liointc and loongson-pch-pic driver.

Jianmin Lv (2):
  irqchip/loongson-pch-pic: Fix initialization of HT vector register
  irqchip/loongson-liointc: Fix IRQ trigger polarity

Liu Peibao (1):
  irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment

Yinbo Zhu (1):
  irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

 drivers/irqchip/irq-loongson-liointc.c |  9 +++++----
 drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++------
 2 files changed, 9 insertions(+), 10 deletions(-)

-- 
2.31.1

[PATCH V1 1/4] irqchip/loongson-pch-pic: Fix initialization of HT vector register

[Jianmin Lv]

In a dual-bridge system based ACPI, the IRQ on PCH PIC of
each bridge sent to CPU is always a zero-based number, which
means that the IRQ on PCH PIC of each bridge is mapped into
vector range from 0 to 63 of upstream irqchip(e.g. EIOINTC).

      EIOINTC N: [0 ... 63 | 64 ... 255]
                  --------   ----------
                      ^          ^
                      |          |
                  PCH PIC N      |
                             PCH MSI N

For example, the IRQ vector number of sata controller on
PCH PIC of each bridge is 16, which is sent to upstream
irqchip of EIOINTC when an interrupt occurs, which will set
bit 16 of EIOINTC. Since hwirq of 16 on EIOINTC has been
mapped to a irq_desc for sata controller during hierarchy
irq allocation, the related mapped IRQ will be found through
irq_resolve_mapping() in the IRQ domain of EIOINTC.

So, the IRQ number set in HT vector register should be fixed
to be a zero-based number.

Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: liuyun <liuyun@loongson.cn>
---
 drivers/irqchip/irq-loongson-pch-pic.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index e5fe4d50be05..921c5c0190d1 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -401,14 +401,12 @@ static int __init acpi_cascade_irqdomain_init(void)
 int __init pch_pic_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_bio_pic *acpi_pchpic)
 {
-	int ret, vec_base;
+	int ret;
 	struct fwnode_handle *domain_handle;
 
 	if (find_pch_pic(acpi_pchpic->gsi_base) >= 0)
 		return 0;
 
-	vec_base = acpi_pchpic->gsi_base - GSI_MIN_PCH_IRQ;
-
 	domain_handle = irq_domain_alloc_fwnode(&acpi_pchpic->address);
 	if (!domain_handle) {
 		pr_err("Unable to allocate domain handle\n");
@@ -416,7 +414,7 @@ int __init pch_pic_acpi_init(struct irq_domain *parent,
 	}
 
 	ret = pch_pic_init(acpi_pchpic->address, acpi_pchpic->size,
-				vec_base, parent, domain_handle, acpi_pchpic->gsi_base);
+				0, parent, domain_handle, acpi_pchpic->gsi_base);
 
 	if (ret < 0) {
 		irq_domain_free_fwnode(domain_handle);
-- 
2.31.1

[PATCH V1 2/4] irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment

[Jianmin Lv]

From: Liu Peibao <liupeibao@loongson.cn>

In DeviceTree path, when ht_vec_base is not zero, the hwirq of PCH PIC will
be assigned incorrectly. Because when pch_pic_domain_translate() adds the
ht_vec_base to hwirq, the hwirq dose not subtract the ht_vec_base when
calling irq_domain_set_info().

The ht_vec_base is designed for the parent irq chip/domain of the PCH PIC.
It seems not proper to deal this in callbacks of the PCH PIC domain and
let's put this back like the initial commit ef8c01eb64ca ("irqchip: Add
Loongson PCH PIC controller").

Fixes: bcdd75c596c8 ("irqchip/loongson-pch-pic: Add ACPI init support")
Cc: stable@vger.kernel.org
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-pch-pic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index 921c5c0190d1..93a71f66efeb 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -164,7 +164,7 @@ static int pch_pic_domain_translate(struct irq_domain *d,
 		if (fwspec->param_count < 2)
 			return -EINVAL;
 
-		*hwirq = fwspec->param[0] + priv->ht_vec_base;
+		*hwirq = fwspec->param[0];
 		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
 	} else {
 		if (fwspec->param_count < 1)
@@ -196,7 +196,7 @@ static int pch_pic_alloc(struct irq_domain *domain, unsigned int virq,
 
 	parent_fwspec.fwnode = domain->parent->fwnode;
 	parent_fwspec.param_count = 1;
-	parent_fwspec.param[0] = hwirq;
+	parent_fwspec.param[0] = hwirq + priv->ht_vec_base;
 
 	err = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
 	if (err)
-- 
2.31.1

[PATCH V1 3/4] irqchip/loongson-liointc: Fix IRQ trigger polarity

[Jianmin Lv]

For IRQ controller INT_POLARITY regitser of Loongson-2K CPU
series, '0' indicates high level or rising edge triggered IRQ,
'1' indicates low level or falling edge triggered IRQ.

For Loongson-3A CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.

Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 8d00a9ad5b00..9a9c2bf048a3 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -116,19 +116,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_LEVEL_HIGH:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	default:
 		irq_gc_unlock_irqrestore(gc, flags);
-- 
2.31.1

[PATCH V1 4/4] irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

[Jianmin Lv]

From: Yinbo Zhu <zhuyinbo@loongson.cn>

Liointc doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from liointc to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 9a9c2bf048a3..dbd1ccce0fb2 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -291,6 +291,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
 	ct->chip.irq_set_type = liointc_set_type;
+	ct->chip.flags = IRQCHIP_SKIP_SET_WAKE;
 
 	gc->mask_cache = 0;
 	priv->gc = gc;
-- 
2.31.1

Re: [PATCH V1 0/4] irqchip/loongson: Fix some loongson irqchip drivers

[Jianmin Lv]

Hi, all

So sorry for this wrong series which is old, please skip them.

Thanks.
Jianmin

On 2023/6/14 下午7:14, Jianmin Lv wrote:
> The patch series provide some fixes for loongson-liointc and loongson-pch-pic driver.
> 
> Jianmin Lv (2):
>    irqchip/loongson-pch-pic: Fix initialization of HT vector register
>    irqchip/loongson-liointc: Fix IRQ trigger polarity
> 
> Liu Peibao (1):
>    irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
> 
> Yinbo Zhu (1):
>    irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
> 
>   drivers/irqchip/irq-loongson-liointc.c |  9 +++++----
>   drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++------
>   2 files changed, 9 insertions(+), 10 deletions(-)
> 

Re: [PATCH V1 4/4] irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

[Jianmin Lv]

On 2023/5/20 下午4:43, Huacai Chen wrote:
> Hi, Jianmin,
> 
> On Sat, May 20, 2023 at 2:38 PM Jianmin Lv <lvjianmin@loongson.cn> wrote:
>>
>> From: Yinbo Zhu <zhuyinbo@loongson.cn>
>>
>> Liointc doesn't require specific logic to work with wakeup IRQs,
>> and no irq_set_wake callback is needed. To allow registered IRQs
>> from liointc to be used as a wakeup-source, and ensure irq_set_irq_wake()
>> works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.
> Maybe using LIOINTC instead of Liointc/liointc is better in commit
> message. Except this small issue, for the whole series,
> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
> 
Ok, I'll change it, thanks.

>>
>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
>> ---
>>   drivers/irqchip/irq-loongson-liointc.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
>> index 9a9c2bf048a3..dbd1ccce0fb2 100644
>> --- a/drivers/irqchip/irq-loongson-liointc.c
>> +++ b/drivers/irqchip/irq-loongson-liointc.c
>> @@ -291,6 +291,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
>>          ct->chip.irq_mask = irq_gc_mask_disable_reg;
>>          ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
>>          ct->chip.irq_set_type = liointc_set_type;
>> +       ct->chip.flags = IRQCHIP_SKIP_SET_WAKE;
>>
>>          gc->mask_cache = 0;
>>          priv->gc = gc;
>> --
>> 2.31.1
>>
>>
> _______________________________________________
> Loongson-kernel mailing list -- loongson-kernel@lists.loongnix.cn
> To unsubscribe send an email to loongson-kernel-leave@lists.loongnix.cn
> 

Re: [PATCH V1 4/4] irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

[Huacai Chen]

Hi, Jianmin,

On Sat, May 20, 2023 at 2:38 PM Jianmin Lv <lvjianmin@loongson.cn> wrote:
>
> From: Yinbo Zhu <zhuyinbo@loongson.cn>
>
> Liointc doesn't require specific logic to work with wakeup IRQs,
> and no irq_set_wake callback is needed. To allow registered IRQs
> from liointc to be used as a wakeup-source, and ensure irq_set_irq_wake()
> works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.
Maybe using LIOINTC instead of Liointc/liointc is better in commit
message. Except this small issue, for the whole series,
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>

>
> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> ---
>  drivers/irqchip/irq-loongson-liointc.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
> index 9a9c2bf048a3..dbd1ccce0fb2 100644
> --- a/drivers/irqchip/irq-loongson-liointc.c
> +++ b/drivers/irqchip/irq-loongson-liointc.c
> @@ -291,6 +291,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
>         ct->chip.irq_mask = irq_gc_mask_disable_reg;
>         ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
>         ct->chip.irq_set_type = liointc_set_type;
> +       ct->chip.flags = IRQCHIP_SKIP_SET_WAKE;
>
>         gc->mask_cache = 0;
>         priv->gc = gc;
> --
> 2.31.1
>
>

[PATCH V1 4/4] irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

[Jianmin Lv]

From: Yinbo Zhu <zhuyinbo@loongson.cn>

Liointc doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from liointc to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 9a9c2bf048a3..dbd1ccce0fb2 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -291,6 +291,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
 	ct->chip.irq_set_type = liointc_set_type;
+	ct->chip.flags = IRQCHIP_SKIP_SET_WAKE;
 
 	gc->mask_cache = 0;
 	priv->gc = gc;
-- 
2.31.1