[PATCH v4 00/14] Add display driver for MT8188 VDOSYS1

[PATCH v4 00/14] Add display driver for MT8188 VDOSYS1

[Hsiao Chien Sung]

Support MT8188 VDOSYS1 in display driver.

Changes in v4:
- Add new functions in mtk_disp_ovl_adaptor.c to enable/disable
  components and reuse them when clock enable/disable
- Rename components in mtk_disp_ovl_adaptor.c and sort them in
  alphabetical order

Changes in v3:
- Define macro MMSYS_RST_NR in mtk-mmsys.h and update reset table
- Fix typos (ETDHR -> ETHDR, VSNYC -> VSYNC)
- Rebase dt-bindings on linux-next
- Refine description of Padding
- Squash reset bit map commits for VDO0 and VDO1 into one

Changes in v2:
- Remove redundant compatibles of MT8188 because it shares the same
  configuration with MT8195
- Separate dt-bindings by modules
- Support reset bit mapping in mmsys driver

Hsiao Chien Sung (14):
  dt-bindings: display: mediatek: ethdr: Add compatible for MT8188
  dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188
  dt-bindings: display: mediatek: merge: Add compatible for MT8188
  dt-bindings: display: mediatek: padding: Add MT8188
  dt-bindings: arm: mediatek: Add compatible for MT8188
  dt-bindings: reset: mt8188: Add VDOSYS reset control bits
  soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys
  soc: mediatek: Support MT8188 VDOSYS1 Padding in mtk-mmsys
  soc: mediatek: Support reset bit mapping in mmsys driver
  soc: mediatek: Add MT8188 VDOSYS reset bit map
  drm/mediatek: Support MT8188 VDOSYS1 in display driver
  drm/mediatek: Improve compatibility of display driver
  drm/mediatek: Sort OVL adaptor components in alphabetical order
  drm/mediatek: Support MT8188 Padding in display driver

 .../bindings/arm/mediatek/mediatek,mmsys.yaml |   1 +
 .../display/mediatek/mediatek,ethdr.yaml      |   6 +-
 .../display/mediatek/mediatek,mdp-rdma.yaml   |   6 +-
 .../display/mediatek/mediatek,merge.yaml      |   3 +
 .../display/mediatek/mediatek,padding.yaml    |  81 ++++++
 drivers/gpu/drm/mediatek/Makefile             |   3 +-
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |   3 +
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 249 ++++++++++--------
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |   4 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.h        |   2 +-
 drivers/gpu/drm/mediatek/mtk_padding.c        | 136 ++++++++++
 drivers/soc/mediatek/mt8188-mmsys.h           | 210 +++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.c              |  24 ++
 drivers/soc/mediatek/mtk-mmsys.h              |  32 +++
 drivers/soc/mediatek/mtk-mutex.c              |  51 ++++
 include/dt-bindings/reset/mt8188-resets.h     |  75 ++++++
 include/linux/soc/mediatek/mtk-mmsys.h        |   8 +
 17 files changed, 782 insertions(+), 112 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
 create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c

--
2.39.2

[PATCH v4 01/14] dt-bindings: display: mediatek: ethdr: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 ETHDR.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/display/mediatek/mediatek,ethdr.yaml           | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
index 801fa66ae615..677882348ede 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -23,7 +23,11 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195-disp-ethdr
+    oneOf:
+      - const: mediatek,mt8195-disp-ethdr
+      - items:
+          - const: mediatek,mt8188-disp-ethdr
+          - const: mediatek,mt8195-disp-ethdr
 
   reg:
     maxItems: 7
-- 
2.39.2

[PATCH v4 02/14] dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 MDP-RDMA.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/display/mediatek/mediatek,mdp-rdma.yaml        | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
index dd12e2ff685c..7570a0684967 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -21,7 +21,11 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195-vdo1-rdma
+    oneOf:
+      - const: mediatek,mt8195-vdo1-rdma
+      - items:
+          - const: mediatek,mt8188-vdo1-rdma
+          - const: mediatek,mt8195-vdo1-rdma
 
   reg:
     maxItems: 1
-- 
2.39.2

[PATCH v4 03/14] dt-bindings: display: mediatek: merge: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 MERGE.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,merge.yaml   | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index eead5cb8636e..5c678695162e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -27,6 +27,9 @@ properties:
       - items:
           - const: mediatek,mt6795-disp-merge
           - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8188-disp-merge
+          - const: mediatek,mt8195-disp-merge
 
   reg:
     maxItems: 1
-- 
2.39.2

[PATCH v4 04/14] dt-bindings: display: mediatek: padding: Add MT8188

[Hsiao Chien Sung]

Padding is a new hardware module on MediaTek MT8188,
add dt-bindings for it.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../display/mediatek/mediatek,padding.yaml    | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
new file mode 100644
index 000000000000..db24801ebc48
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Padding provides ability to add pixels to width and height of a layer with
+  specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+  width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+  we need Padding to deal with odd width.
+  Please notice that even if the Padding is in bypass mode, settings in
+  register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+  compatible:
+    const: mediatek,mt8188-padding
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  mediatek,gce-client-reg:
+    description:
+      GCE (Global Command Engine) is a multi-core micro processor that helps
+      its clients to execute commands without interrupting CPU. This property
+      describes GCE client's information that is composed by 4 fields.
+      1. Phandle of the GCE (there may be several GCE processors)
+      2. Sub-system ID defined in the dt-binding like a user ID
+         (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+      3. Offset from base address of the subsys you are at
+      4. Size of the register the client needs
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: Phandle of the GCE
+        - description: Subsys ID defined in the dt-binding
+        - description: Offset from base address of the subsys
+        - description: Size of register
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+    #include <dt-bindings/power/mediatek,mt8188-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        padding0: padding@1c11d000 {
+            compatible = "mediatek,mt8188-padding";
+            reg = <0 0x1c11d000 0 0x1000>;
+            clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+            power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+        };
+    };
-- 
2.39.2

[PATCH v4 05/14] dt-bindings: arm: mediatek: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 VDOSYS1.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml         | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 536f5a5ebd24..642fa2e4736e 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -32,6 +32,7 @@ properties:
               - mediatek,mt8183-mmsys
               - mediatek,mt8186-mmsys
               - mediatek,mt8188-vdosys0
+              - mediatek,mt8188-vdosys1
               - mediatek,mt8192-mmsys
               - mediatek,mt8195-vdosys1
               - mediatek,mt8195-vppsys0
-- 
2.39.2

[PATCH v4 06/14] dt-bindings: reset: mt8188: Add VDOSYS reset control bits

[Hsiao Chien Sung]

Add MT8188 VDOSYS0 and VDOSYS1 reset control bits.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 include/dt-bindings/reset/mt8188-resets.h | 75 +++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/include/dt-bindings/reset/mt8188-resets.h b/include/dt-bindings/reset/mt8188-resets.h
index ba9a5e9b8899..5a58c54e7d20 100644
--- a/include/dt-bindings/reset/mt8188-resets.h
+++ b/include/dt-bindings/reset/mt8188-resets.h
@@ -38,4 +38,79 @@
 #define MT8188_INFRA_RST1_THERMAL_CTRL_RST         1
 #define MT8188_INFRA_RST3_PTP_CTRL_RST             2
 
+#define MT8188_VDO0_RST_DISP_OVL0		0
+#define MT8188_VDO0_RST_FAKE_ENG0		1
+#define MT8188_VDO0_RST_DISP_CCORR0		2
+#define MT8188_VDO0_RST_DISP_MUTEX0		3
+#define MT8188_VDO0_RST_DISP_GAMMA0		4
+#define MT8188_VDO0_RST_DISP_DITHER0		5
+#define MT8188_VDO0_RST_DISP_WDMA0		6
+#define MT8188_VDO0_RST_DISP_RDMA0		7
+#define MT8188_VDO0_RST_DSI0			8
+#define MT8188_VDO0_RST_DSI1			9
+#define MT8188_VDO0_RST_DSC_WRAP0		10
+#define MT8188_VDO0_RST_VPP_MERGE0		11
+#define MT8188_VDO0_RST_DP_INTF0		12
+#define MT8188_VDO0_RST_DISP_AAL0		13
+#define MT8188_VDO0_RST_INLINEROT0		14
+#define MT8188_VDO0_RST_APB_BUS			15
+#define MT8188_VDO0_RST_DISP_COLOR0		16
+#define MT8188_VDO0_RST_MDP_WROT0		17
+#define MT8188_VDO0_RST_DISP_RSZ0		18
+
+#define MT8188_VDO1_RST_SMI_LARB2		0
+#define MT8188_VDO1_RST_SMI_LARB3		1
+#define MT8188_VDO1_RST_GALS			2
+#define MT8188_VDO1_RST_FAKE_ENG0		3
+#define MT8188_VDO1_RST_FAKE_ENG1		4
+#define MT8188_VDO1_RST_MDP_RDMA0		5
+#define MT8188_VDO1_RST_MDP_RDMA1		6
+#define MT8188_VDO1_RST_MDP_RDMA2		7
+#define MT8188_VDO1_RST_MDP_RDMA3		8
+#define MT8188_VDO1_RST_VPP_MERGE0		9
+#define MT8188_VDO1_RST_VPP_MERGE1		10
+#define MT8188_VDO1_RST_VPP_MERGE2		11
+#define MT8188_VDO1_RST_VPP_MERGE3		12
+#define MT8188_VDO1_RST_VPP_MERGE4		13
+#define MT8188_VDO1_RST_VPP2_TO_VDO1_DL_ASYNC	14
+#define MT8188_VDO1_RST_VPP3_TO_VDO1_DL_ASYNC	15
+#define MT8188_VDO1_RST_DISP_MUTEX		16
+#define MT8188_VDO1_RST_MDP_RDMA4		17
+#define MT8188_VDO1_RST_MDP_RDMA5		18
+#define MT8188_VDO1_RST_MDP_RDMA6		19
+#define MT8188_VDO1_RST_MDP_RDMA7		20
+#define MT8188_VDO1_RST_DP_INTF1_MMCK		21
+#define MT8188_VDO1_RST_DPI0_MM_CK		22
+#define MT8188_VDO1_RST_DPI1_MM_CK		23
+#define MT8188_VDO1_RST_MERGE0_DL_ASYNC		24
+#define MT8188_VDO1_RST_MERGE1_DL_ASYNC		25
+#define MT8188_VDO1_RST_MERGE2_DL_ASYNC		26
+#define MT8188_VDO1_RST_MERGE3_DL_ASYNC		27
+#define MT8188_VDO1_RST_MERGE4_DL_ASYNC		28
+#define MT8188_VDO1_RST_VDO0_DSC_TO_VDO1_DL_ASYNC	29
+#define MT8188_VDO1_RST_VDO0_MERGE_TO_VDO1_DL_ASYNC	30
+#define MT8188_VDO1_RST_PADDING0		31
+#define MT8188_VDO1_RST_PADDING1		32
+#define MT8188_VDO1_RST_PADDING2		33
+#define MT8188_VDO1_RST_PADDING3		34
+#define MT8188_VDO1_RST_PADDING4		35
+#define MT8188_VDO1_RST_PADDING5		36
+#define MT8188_VDO1_RST_PADDING6		37
+#define MT8188_VDO1_RST_PADDING7		38
+#define MT8188_VDO1_RST_DISP_RSZ0		39
+#define MT8188_VDO1_RST_DISP_RSZ1		40
+#define MT8188_VDO1_RST_DISP_RSZ2		41
+#define MT8188_VDO1_RST_DISP_RSZ3		42
+#define MT8188_VDO1_RST_HDR_VDO_FE0		43
+#define MT8188_VDO1_RST_HDR_GFX_FE0		44
+#define MT8188_VDO1_RST_HDR_VDO_BE		45
+#define MT8188_VDO1_RST_HDR_VDO_FE1		46
+#define MT8188_VDO1_RST_HDR_GFX_FE1		47
+#define MT8188_VDO1_RST_DISP_MIXER		48
+#define MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC	49
+#define MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC	50
+#define MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC	51
+#define MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC	52
+#define MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC	53
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8188 */
-- 
2.39.2

[PATCH v4 07/14] soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys

[Hsiao Chien Sung]

- Add register definitions for MT8188
- Add VDOSYS1 routing table
- Update MUTEX definitions accordingly
- Set VSYNC length from 0x40 (default) to 1 since ETHDR is bypassed

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mt8188-mmsys.h | 126 ++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.c    |  10 +++
 drivers/soc/mediatek/mtk-mmsys.h    |  29 +++++++
 drivers/soc/mediatek/mtk-mutex.c    |  35 ++++++++
 4 files changed, 200 insertions(+)

diff --git a/drivers/soc/mediatek/mt8188-mmsys.h b/drivers/soc/mediatek/mt8188-mmsys.h
index 448cc3761b43..a9490c3c4256 100644
--- a/drivers/soc/mediatek/mt8188-mmsys.h
+++ b/drivers/soc/mediatek/mt8188-mmsys.h
@@ -67,6 +67,56 @@
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_VPP_MERGE		BIT(18)
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_DISP_WDMA0		BIT(19)
 
+#define MT8188_VDO1_HDR_TOP_CFG					0xd00
+#define MT8188_VDO1_MIXER_IN1_ALPHA				0xd30
+#define MT8188_VDO1_MIXER_IN1_PAD				0xd40
+#define MT8188_VDO1_MIXER_VSYNC_LEN				0xd5c
+#define MT8188_VDO1_MERGE0_ASYNC_CFG_WD				0xe30
+#define MT8188_VDO1_HDRBE_ASYNC_CFG_WD				0xe70
+#define MT8188_VDO1_VPP_MERGE0_P0_SEL_IN			0xf04
+#define MT8188_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0		1
+#define MT8188_VDO1_VPP_MERGE0_P1_SEL_IN			0xf08
+#define MT8188_VPP_MERGE0_P1_SEL_IN_FROM_MDP_RDMA1		1
+#define MT8188_VDO1_DISP_DPI1_SEL_IN				0xf10
+#define MT8188_DISP_DPI1_SEL_IN_FROM_VPP_MERGE4_MOUT		0
+#define MT8188_VDO1_DISP_DP_INTF0_SEL_IN			0xf14
+#define MT8188_DISP_DP_INTF0_SEL_IN_FROM_VPP_MERGE4_MOUT	0
+#define MT8188_VDO1_MERGE4_SOUT_SEL				0xf18
+#define MT8188_MERGE4_SOUT_TO_DPI1_SEL				BIT(2)
+#define MT8188_MERGE4_SOUT_TO_DP_INTF0_SEL			BIT(3)
+#define MT8188_VDO1_MIXER_IN1_SEL_IN				0xf24
+#define MT8188_MIXER_IN1_SEL_IN_FROM_MERGE0_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_IN2_SEL_IN				0xf28
+#define MT8188_MIXER_IN2_SEL_IN_FROM_MERGE1_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_IN3_SEL_IN				0xf2c
+#define MT8188_MIXER_IN3_SEL_IN_FROM_MERGE2_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_IN4_SEL_IN				0xf30
+#define MT8188_MIXER_IN4_SEL_IN_FROM_MERGE3_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_OUT_SOUT_SEL				0xf34
+#define MT8188_MIXER_SOUT_TO_MERGE4_ASYNC_SEL			1
+#define MT8188_VDO1_VPP_MERGE1_P0_SEL_IN			0xf3c
+#define MT8188_VPP_MERGE1_P0_SEL_IN_FROM_MDP_RDMA2		1
+#define MT8188_VDO1_MERGE0_ASYNC_SOUT_SEL			0xf40
+#define MT8188_SOUT_TO_MIXER_IN1_SEL				1
+#define MT8188_VDO1_MERGE1_ASYNC_SOUT_SEL			0xf44
+#define MT8188_SOUT_TO_MIXER_IN2_SEL				1
+#define MT8188_VDO1_MERGE2_ASYNC_SOUT_SEL			0xf48
+#define MT8188_SOUT_TO_MIXER_IN3_SEL				1
+#define MT8188_VDO1_MERGE3_ASYNC_SOUT_SEL			0xf4c
+#define MT8188_SOUT_TO_MIXER_IN4_SEL				1
+#define MT8188_VDO1_MERGE4_ASYNC_SEL_IN				0xf50
+#define MT8188_MERGE4_ASYNC_SEL_IN_FROM_MIXER_OUT_SOUT		1
+#define MT8188_VDO1_MIXER_IN1_SOUT_SEL				0xf58
+#define MT8188_MIXER_IN1_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_IN2_SOUT_SEL				0xf5c
+#define MT8188_MIXER_IN2_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_IN3_SOUT_SEL				0xf60
+#define MT8188_MIXER_IN3_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_IN4_SOUT_SEL				0xf64
+#define MT8188_MIXER_IN4_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_SOUT_SEL_IN				0xf68
+#define MT8188_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER		0
+
 static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
 	{
 		DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
@@ -146,4 +196,80 @@ static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
 	},
 };
 
+static const struct mtk_mmsys_routes mmsys_mt8188_vdo1_routing_table[] = {
+	{
+		DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1,
+		MT8188_VDO1_VPP_MERGE0_P0_SEL_IN, GENMASK(0, 0),
+		MT8188_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0
+	}, {
+		DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1,
+		MT8188_VDO1_VPP_MERGE0_P1_SEL_IN, GENMASK(0, 0),
+		MT8188_VPP_MERGE0_P1_SEL_IN_FROM_MDP_RDMA1
+	}, {
+		DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2,
+		MT8188_VDO1_VPP_MERGE1_P0_SEL_IN, GENMASK(0, 0),
+		MT8188_VPP_MERGE1_P0_SEL_IN_FROM_MDP_RDMA2
+	}, {
+		DDP_COMPONENT_MERGE1, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE0_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN1_SEL
+	}, {
+		DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE1_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN2_SEL
+	}, {
+		DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE2_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN3_SEL
+	}, {
+		DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE3_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN4_SEL
+	}, {
+		DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+		MT8188_VDO1_MIXER_OUT_SOUT_SEL, GENMASK(0, 0),
+		MT8188_MIXER_SOUT_TO_MERGE4_ASYNC_SEL
+	}, {
+		DDP_COMPONENT_MERGE1, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN1_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN1_SEL_IN_FROM_MERGE0_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN2_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN2_SEL_IN_FROM_MERGE1_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN3_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN3_SEL_IN_FROM_MERGE2_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN4_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN4_SEL_IN_FROM_MERGE3_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+		MT8188_VDO1_MIXER_SOUT_SEL_IN, GENMASK(2, 0),
+		MT8188_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER
+	}, {
+		DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+		MT8188_VDO1_MERGE4_ASYNC_SEL_IN, GENMASK(2, 0),
+		MT8188_MERGE4_ASYNC_SEL_IN_FROM_MIXER_OUT_SOUT
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DPI1,
+		MT8188_VDO1_DISP_DPI1_SEL_IN, GENMASK(1, 0),
+		MT8188_DISP_DPI1_SEL_IN_FROM_VPP_MERGE4_MOUT
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DPI1,
+		MT8188_VDO1_MERGE4_SOUT_SEL, GENMASK(1, 0),
+		MT8188_MERGE4_SOUT_TO_DPI1_SEL
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DP_INTF1,
+		MT8188_VDO1_DISP_DP_INTF0_SEL_IN, GENMASK(1, 0),
+		MT8188_DISP_DP_INTF0_SEL_IN_FROM_VPP_MERGE4_MOUT
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DP_INTF1,
+		MT8188_VDO1_MERGE4_SOUT_SEL, GENMASK(3, 0),
+		MT8188_MERGE4_SOUT_TO_DP_INTF0_SEL
+	}
+};
+
 #endif /* __SOC_MEDIATEK_MT8188_MMSYS_H */
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 9619faa796e8..680dff5f89ec 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -89,6 +89,15 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
 	.num_routes = ARRAY_SIZE(mmsys_mt8188_routing_table),
 };
 
+
+static const struct mtk_mmsys_driver_data mt8188_vdosys1_driver_data = {
+	.clk_driver = "clk-mt8188-vdo1",
+	.routes = mmsys_mt8188_vdo1_routing_table,
+	.num_routes = ARRAY_SIZE(mmsys_mt8188_vdo1_routing_table),
+	.num_resets = 96,
+	.vsync_len = 1,
+};
+
 static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
 	.clk_driver = "clk-mt8192-mm",
 	.routes = mmsys_mt8192_routing_table,
@@ -431,6 +440,7 @@ static const struct of_device_id of_match_mtk_mmsys[] = {
 	{ .compatible = "mediatek,mt8183-mmsys", .data = &mt8183_mmsys_driver_data },
 	{ .compatible = "mediatek,mt8186-mmsys", .data = &mt8186_mmsys_driver_data },
 	{ .compatible = "mediatek,mt8188-vdosys0", .data = &mt8188_vdosys0_driver_data },
+	{ .compatible = "mediatek,mt8188-vdosys1", .data = &mt8188_vdosys1_driver_data },
 	{ .compatible = "mediatek,mt8192-mmsys", .data = &mt8192_mmsys_driver_data },
 	/* "mediatek,mt8195-mmsys" compatible is deprecated */
 	{ .compatible = "mediatek,mt8195-mmsys", .data = &mt8195_vdosys0_driver_data },
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 6725403d2e3a..964b5449d672 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -86,6 +86,34 @@ struct mtk_mmsys_routes {
 	u32 val;
 };
 
+/**
+ * struct mtk_mmsys_driver_data - settings for the mmsys
+ * @clk_driver: Clock driver name that the mmsys is using
+ *              (defined in drivers/clk/mediatek/clk-*.c).
+ * @routes: Routing table of the mmsys.
+ *          It provides mux settings from one module to another.
+ * @num_routes: Array size of the routes.
+ * @sw0_rst_offset: Register offset for the reset control.
+ * @num_resets: Number of reset bits that are defined
+ * @is_vppsys: Whether the mmsys is VPPSYS (Video Processing Pipe)
+ *             or VDOSYS (Video). Only VDOSYS needs to be added to drm driver.
+ * @vsync_len: VSYNC length of the MIXER.
+ *             VSYNC is usually triggered by the connector, so its length is
+ *             a fixed value as long as the frame rate is decided, but ETHDR and
+ *             MIXER generate their own VSYNC due to hardware design, therefore
+ *             MIXER has to sync with ETHDR by adjusting VSYNC length.
+ *             On MT8195, there is no such setting so we use the gap between
+ *             falling edge and rising edge of SOF (Start of Frame) signal to
+ *             do the job, but since MT8188, VSYNC_LEN setting is introduced to
+ *             solve the problem and is given 0x40 (ticks) as the default value.
+ *             Please notice that this value has to be set to 1 (minimum) if
+ *             ETHDR is bypassed, otherwise MIXER could wait too long and causing
+ *             underflow.
+ *
+ * Each MMSYS (multi-media system) may have different settings, they may use
+ * different clock sources, mux settings, reset control ...etc., and these
+ * differences are all stored here.
+ */
 struct mtk_mmsys_driver_data {
 	const char *clk_driver;
 	const struct mtk_mmsys_routes *routes;
@@ -93,6 +121,7 @@ struct mtk_mmsys_driver_data {
 	const u16 sw0_rst_offset;
 	const u32 num_resets;
 	const bool is_vppsys;
+	const u8 vsync_len;
 };
 
 /*
diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index 4aa0913817ae..c3067b3c8ec4 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -134,6 +134,22 @@
 #define MT8188_MUTEX_MOD_DISP_POSTMASK0		24
 #define MT8188_MUTEX_MOD2_DISP_PWM0		33
 
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA0	0
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA1	1
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA2	2
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA3	3
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA4	4
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA5	5
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA6	6
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA7	7
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE0	20
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE1	21
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE2	22
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE3	23
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE4	24
+#define MT8188_MUTEX_MOD_DISP1_DISP_MIXER	30
+#define MT8188_MUTEX_MOD_DISP1_DP_INTF1		39
+
 #define MT8195_MUTEX_MOD_DISP_OVL0		0
 #define MT8195_MUTEX_MOD_DISP_WDMA0		1
 #define MT8195_MUTEX_MOD_DISP_RDMA0		2
@@ -265,6 +281,7 @@
 #define MT8183_MUTEX_SOF_DPI0			2
 #define MT8188_MUTEX_SOF_DSI0			1
 #define MT8188_MUTEX_SOF_DP_INTF0		3
+#define MT8188_MUTEX_SOF_DP_INTF1		4
 #define MT8195_MUTEX_SOF_DSI0			1
 #define MT8195_MUTEX_SOF_DSI1			2
 #define MT8195_MUTEX_SOF_DP_INTF0		3
@@ -276,6 +293,7 @@
 #define MT8183_MUTEX_EOF_DPI0			(MT8183_MUTEX_SOF_DPI0 << 6)
 #define MT8188_MUTEX_EOF_DSI0			(MT8188_MUTEX_SOF_DSI0 << 7)
 #define MT8188_MUTEX_EOF_DP_INTF0		(MT8188_MUTEX_SOF_DP_INTF0 << 7)
+#define MT8188_MUTEX_EOF_DP_INTF1		(MT8188_MUTEX_SOF_DP_INTF1 << 7)
 #define MT8195_MUTEX_EOF_DSI0			(MT8195_MUTEX_SOF_DSI0 << 7)
 #define MT8195_MUTEX_EOF_DSI1			(MT8195_MUTEX_SOF_DSI1 << 7)
 #define MT8195_MUTEX_EOF_DP_INTF0		(MT8195_MUTEX_SOF_DP_INTF0 << 7)
@@ -446,6 +464,21 @@ static const unsigned int mt8188_mutex_mod[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_DSI0] = MT8188_MUTEX_MOD_DISP_DSI0,
 	[DDP_COMPONENT_PWM0] = MT8188_MUTEX_MOD2_DISP_PWM0,
 	[DDP_COMPONENT_DP_INTF0] = MT8188_MUTEX_MOD_DISP_DP_INTF0,
+	[DDP_COMPONENT_DP_INTF1] = MT8188_MUTEX_MOD_DISP1_DP_INTF1,
+	[DDP_COMPONENT_ETHDR_MIXER] = MT8188_MUTEX_MOD_DISP1_DISP_MIXER,
+	[DDP_COMPONENT_MDP_RDMA0] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA0,
+	[DDP_COMPONENT_MDP_RDMA1] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA1,
+	[DDP_COMPONENT_MDP_RDMA2] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA2,
+	[DDP_COMPONENT_MDP_RDMA3] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA3,
+	[DDP_COMPONENT_MDP_RDMA4] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA4,
+	[DDP_COMPONENT_MDP_RDMA5] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA5,
+	[DDP_COMPONENT_MDP_RDMA6] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA6,
+	[DDP_COMPONENT_MDP_RDMA7] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA7,
+	[DDP_COMPONENT_MERGE1] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE0,
+	[DDP_COMPONENT_MERGE2] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE1,
+	[DDP_COMPONENT_MERGE3] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE2,
+	[DDP_COMPONENT_MERGE4] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE3,
+	[DDP_COMPONENT_MERGE5] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE4,
 };
 
 static const unsigned int mt8192_mutex_mod[DDP_COMPONENT_ID_MAX] = {
@@ -606,6 +639,8 @@ static const unsigned int mt8188_mutex_sof[DDP_MUTEX_SOF_MAX] = {
 		MT8188_MUTEX_SOF_DSI0 | MT8188_MUTEX_EOF_DSI0,
 	[MUTEX_SOF_DP_INTF0] =
 		MT8188_MUTEX_SOF_DP_INTF0 | MT8188_MUTEX_EOF_DP_INTF0,
+	[MUTEX_SOF_DP_INTF1] =
+		MT8188_MUTEX_SOF_DP_INTF1 | MT8188_MUTEX_EOF_DP_INTF1,
 };
 
 static const unsigned int mt8195_mutex_sof[DDP_MUTEX_SOF_MAX] = {
-- 
2.39.2

[PATCH v4 08/14] soc: mediatek: Support MT8188 VDOSYS1 Padding in mtk-mmsys

[Hsiao Chien Sung]

- Add Padding components
- Add Mutex module definitions for Padding

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mtk-mutex.c       | 16 ++++++++++++++++
 include/linux/soc/mediatek/mtk-mmsys.h |  8 ++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index c3067b3c8ec4..f2460d894d78 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -142,6 +142,14 @@
 #define MT8188_MUTEX_MOD_DISP1_MDP_RDMA5	5
 #define MT8188_MUTEX_MOD_DISP1_MDP_RDMA6	6
 #define MT8188_MUTEX_MOD_DISP1_MDP_RDMA7	7
+#define MT8188_MUTEX_MOD_DISP1_PADDING0		8
+#define MT8188_MUTEX_MOD_DISP1_PADDING1		9
+#define MT8188_MUTEX_MOD_DISP1_PADDING2		10
+#define MT8188_MUTEX_MOD_DISP1_PADDING3		11
+#define MT8188_MUTEX_MOD_DISP1_PADDING4		12
+#define MT8188_MUTEX_MOD_DISP1_PADDING5		13
+#define MT8188_MUTEX_MOD_DISP1_PADDING6		14
+#define MT8188_MUTEX_MOD_DISP1_PADDING7		15
 #define MT8188_MUTEX_MOD_DISP1_VPP_MERGE0	20
 #define MT8188_MUTEX_MOD_DISP1_VPP_MERGE1	21
 #define MT8188_MUTEX_MOD_DISP1_VPP_MERGE2	22
@@ -474,6 +482,14 @@ static const unsigned int mt8188_mutex_mod[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_MDP_RDMA5] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA5,
 	[DDP_COMPONENT_MDP_RDMA6] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA6,
 	[DDP_COMPONENT_MDP_RDMA7] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA7,
+	[DDP_COMPONENT_PADDING0] = MT8188_MUTEX_MOD_DISP1_PADDING0,
+	[DDP_COMPONENT_PADDING1] = MT8188_MUTEX_MOD_DISP1_PADDING1,
+	[DDP_COMPONENT_PADDING2] = MT8188_MUTEX_MOD_DISP1_PADDING2,
+	[DDP_COMPONENT_PADDING3] = MT8188_MUTEX_MOD_DISP1_PADDING3,
+	[DDP_COMPONENT_PADDING4] = MT8188_MUTEX_MOD_DISP1_PADDING4,
+	[DDP_COMPONENT_PADDING5] = MT8188_MUTEX_MOD_DISP1_PADDING5,
+	[DDP_COMPONENT_PADDING6] = MT8188_MUTEX_MOD_DISP1_PADDING6,
+	[DDP_COMPONENT_PADDING7] = MT8188_MUTEX_MOD_DISP1_PADDING7,
 	[DDP_COMPONENT_MERGE1] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE0,
 	[DDP_COMPONENT_MERGE2] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE1,
 	[DDP_COMPONENT_MERGE3] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE2,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 2475ef914746..4885b065b849 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -62,6 +62,14 @@ enum mtk_ddp_comp_id {
 	DDP_COMPONENT_OVL_2L1,
 	DDP_COMPONENT_OVL_2L2,
 	DDP_COMPONENT_OVL1,
+	DDP_COMPONENT_PADDING0,
+	DDP_COMPONENT_PADDING1,
+	DDP_COMPONENT_PADDING2,
+	DDP_COMPONENT_PADDING3,
+	DDP_COMPONENT_PADDING4,
+	DDP_COMPONENT_PADDING5,
+	DDP_COMPONENT_PADDING6,
+	DDP_COMPONENT_PADDING7,
 	DDP_COMPONENT_POSTMASK0,
 	DDP_COMPONENT_PWM0,
 	DDP_COMPONENT_PWM1,
-- 
2.39.2

[PATCH v4 09/14] soc: mediatek: Support reset bit mapping in mmsys driver

[Hsiao Chien Sung]

- Reset ID must starts from 0 and be consecutive, but
  the reset bits in our hardware design is not continuous,
  some bits are left unused, we need a map to solve the problem
- Use old style 1-to-1 mapping if .rst_tb is not defined

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c | 9 +++++++++
 drivers/soc/mediatek/mtk-mmsys.h | 3 +++
 2 files changed, 12 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 680dff5f89ec..ace71cc714c4 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -311,6 +311,15 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	u32 offset;
 	u32 reg;
 
+	if (mmsys->data->rst_tb) {
+		if (id >= mmsys->data->num_resets) {
+			dev_err(rcdev->dev, "Invalid reset ID: %lu (>=%u)\n",
+				id, mmsys->data->num_resets);
+			return -EINVAL;
+		}
+		id = mmsys->data->rst_tb[id];
+	}
+
 	offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
 	id = id % MMSYS_SW_RESET_PER_REG;
 	reg = mmsys->data->sw0_rst_offset + offset;
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 964b5449d672..c4c19fcd4b62 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -78,6 +78,8 @@
 #define DSI_SEL_IN_RDMA				0x1
 #define DSI_SEL_IN_MASK				0x1
 
+#define MMSYS_RST_NR(bank, bit) ((bank * 32) + bit)
+
 struct mtk_mmsys_routes {
 	u32 from_comp;
 	u32 to_comp;
@@ -119,6 +121,7 @@ struct mtk_mmsys_driver_data {
 	const struct mtk_mmsys_routes *routes;
 	const unsigned int num_routes;
 	const u16 sw0_rst_offset;
+	const u8 *rst_tb;
 	const u32 num_resets;
 	const bool is_vppsys;
 	const u8 vsync_len;
-- 
2.39.2

[PATCH v4 10/14] soc: mediatek: Add MT8188 VDOSYS reset bit map

[Hsiao Chien Sung]

Add MT8188 reset bit map for VDOSYS0 and VDOSYS1.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mt8188-mmsys.h | 84 +++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.c    |  7 ++-
 2 files changed, 90 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mt8188-mmsys.h b/drivers/soc/mediatek/mt8188-mmsys.h
index a9490c3c4256..6bebf1a69fc0 100644
--- a/drivers/soc/mediatek/mt8188-mmsys.h
+++ b/drivers/soc/mediatek/mt8188-mmsys.h
@@ -3,6 +3,10 @@
 #ifndef __SOC_MEDIATEK_MT8188_MMSYS_H
 #define __SOC_MEDIATEK_MT8188_MMSYS_H
 
+#include <linux/soc/mediatek/mtk-mmsys.h>
+#include <dt-bindings/reset/mt8188-resets.h>
+
+#define MT8188_VDO0_SW0_RST_B				0x190
 #define MT8188_VDO0_OVL_MOUT_EN				0xf14
 #define MT8188_MOUT_DISP_OVL0_TO_DISP_RDMA0		BIT(0)
 #define MT8188_MOUT_DISP_OVL0_TO_DISP_WDMA0		BIT(1)
@@ -67,6 +71,7 @@
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_VPP_MERGE		BIT(18)
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_DISP_WDMA0		BIT(19)
 
+#define MT8188_VDO1_SW0_RST_B					0x1d0
 #define MT8188_VDO1_HDR_TOP_CFG					0xd00
 #define MT8188_VDO1_MIXER_IN1_ALPHA				0xd30
 #define MT8188_VDO1_MIXER_IN1_PAD				0xd40
@@ -117,6 +122,85 @@
 #define MT8188_VDO1_MIXER_SOUT_SEL_IN				0xf68
 #define MT8188_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER		0
 
+static const u8 mmsys_mt8188_vdo0_rst_tb[] = {
+	[MT8188_VDO0_RST_DISP_OVL0]	= MMSYS_RST_NR(0, 0),
+	[MT8188_VDO0_RST_FAKE_ENG0]	= MMSYS_RST_NR(0, 2),
+	[MT8188_VDO0_RST_DISP_CCORR0]	= MMSYS_RST_NR(0, 4),
+	[MT8188_VDO0_RST_DISP_MUTEX0]	= MMSYS_RST_NR(0, 6),
+	[MT8188_VDO0_RST_DISP_GAMMA0]	= MMSYS_RST_NR(0, 8),
+	[MT8188_VDO0_RST_DISP_DITHER0]	= MMSYS_RST_NR(0, 10),
+	[MT8188_VDO0_RST_DISP_WDMA0]	= MMSYS_RST_NR(0, 17),
+	[MT8188_VDO0_RST_DISP_RDMA0]	= MMSYS_RST_NR(0, 19),
+	[MT8188_VDO0_RST_DSI0]		= MMSYS_RST_NR(0, 21),
+	[MT8188_VDO0_RST_DSI1]		= MMSYS_RST_NR(0, 22),
+	[MT8188_VDO0_RST_DSC_WRAP0]	= MMSYS_RST_NR(0, 23),
+	[MT8188_VDO0_RST_VPP_MERGE0]	= MMSYS_RST_NR(0, 24),
+	[MT8188_VDO0_RST_DP_INTF0]	= MMSYS_RST_NR(0, 25),
+	[MT8188_VDO0_RST_DISP_AAL0]	= MMSYS_RST_NR(0, 26),
+	[MT8188_VDO0_RST_INLINEROT0]	= MMSYS_RST_NR(0, 27),
+	[MT8188_VDO0_RST_APB_BUS]	= MMSYS_RST_NR(0, 28),
+	[MT8188_VDO0_RST_DISP_COLOR0]	= MMSYS_RST_NR(0, 29),
+	[MT8188_VDO0_RST_MDP_WROT0]	= MMSYS_RST_NR(0, 30),
+	[MT8188_VDO0_RST_DISP_RSZ0]	= MMSYS_RST_NR(0, 31),
+};
+
+static const u8 mmsys_mt8188_vdo1_rst_tb[] = {
+	[MT8188_VDO1_RST_SMI_LARB2]			= MMSYS_RST_NR(0, 0),
+	[MT8188_VDO1_RST_SMI_LARB3]			= MMSYS_RST_NR(0, 1),
+	[MT8188_VDO1_RST_GALS]				= MMSYS_RST_NR(0, 2),
+	[MT8188_VDO1_RST_FAKE_ENG0]			= MMSYS_RST_NR(0, 3),
+	[MT8188_VDO1_RST_FAKE_ENG1]			= MMSYS_RST_NR(0, 4),
+	[MT8188_VDO1_RST_MDP_RDMA0]			= MMSYS_RST_NR(0, 5),
+	[MT8188_VDO1_RST_MDP_RDMA1]			= MMSYS_RST_NR(0, 6),
+	[MT8188_VDO1_RST_MDP_RDMA2]			= MMSYS_RST_NR(0, 7),
+	[MT8188_VDO1_RST_MDP_RDMA3]			= MMSYS_RST_NR(0, 8),
+	[MT8188_VDO1_RST_VPP_MERGE0]			= MMSYS_RST_NR(0, 9),
+	[MT8188_VDO1_RST_VPP_MERGE1]			= MMSYS_RST_NR(0, 10),
+	[MT8188_VDO1_RST_VPP_MERGE2]			= MMSYS_RST_NR(0, 11),
+	[MT8188_VDO1_RST_VPP_MERGE3]			= MMSYS_RST_NR(1, 0),
+	[MT8188_VDO1_RST_VPP_MERGE4]			= MMSYS_RST_NR(1, 1),
+	[MT8188_VDO1_RST_VPP2_TO_VDO1_DL_ASYNC]		= MMSYS_RST_NR(1, 2),
+	[MT8188_VDO1_RST_VPP3_TO_VDO1_DL_ASYNC]		= MMSYS_RST_NR(1, 3),
+	[MT8188_VDO1_RST_DISP_MUTEX]			= MMSYS_RST_NR(1, 4),
+	[MT8188_VDO1_RST_MDP_RDMA4]			= MMSYS_RST_NR(1, 5),
+	[MT8188_VDO1_RST_MDP_RDMA5]			= MMSYS_RST_NR(1, 6),
+	[MT8188_VDO1_RST_MDP_RDMA6]			= MMSYS_RST_NR(1, 7),
+	[MT8188_VDO1_RST_MDP_RDMA7]			= MMSYS_RST_NR(1, 8),
+	[MT8188_VDO1_RST_DP_INTF1_MMCK]			= MMSYS_RST_NR(1, 9),
+	[MT8188_VDO1_RST_DPI0_MM_CK]			= MMSYS_RST_NR(1, 10),
+	[MT8188_VDO1_RST_DPI1_MM_CK]			= MMSYS_RST_NR(1, 11),
+	[MT8188_VDO1_RST_MERGE0_DL_ASYNC]		= MMSYS_RST_NR(1, 13),
+	[MT8188_VDO1_RST_MERGE1_DL_ASYNC]		= MMSYS_RST_NR(1, 14),
+	[MT8188_VDO1_RST_MERGE2_DL_ASYNC]		= MMSYS_RST_NR(1, 15),
+	[MT8188_VDO1_RST_MERGE3_DL_ASYNC]		= MMSYS_RST_NR(1, 16),
+	[MT8188_VDO1_RST_MERGE4_DL_ASYNC]		= MMSYS_RST_NR(1, 17),
+	[MT8188_VDO1_RST_VDO0_DSC_TO_VDO1_DL_ASYNC]	= MMSYS_RST_NR(1, 18),
+	[MT8188_VDO1_RST_VDO0_MERGE_TO_VDO1_DL_ASYNC]	= MMSYS_RST_NR(1, 19),
+	[MT8188_VDO1_RST_PADDING0]			= MMSYS_RST_NR(1, 20),
+	[MT8188_VDO1_RST_PADDING1]			= MMSYS_RST_NR(1, 21),
+	[MT8188_VDO1_RST_PADDING2]			= MMSYS_RST_NR(1, 22),
+	[MT8188_VDO1_RST_PADDING3]			= MMSYS_RST_NR(1, 23),
+	[MT8188_VDO1_RST_PADDING4]			= MMSYS_RST_NR(1, 24),
+	[MT8188_VDO1_RST_PADDING5]			= MMSYS_RST_NR(1, 25),
+	[MT8188_VDO1_RST_PADDING6]			= MMSYS_RST_NR(1, 26),
+	[MT8188_VDO1_RST_PADDING7]			= MMSYS_RST_NR(1, 27),
+	[MT8188_VDO1_RST_DISP_RSZ0]			= MMSYS_RST_NR(1, 28),
+	[MT8188_VDO1_RST_DISP_RSZ1]			= MMSYS_RST_NR(1, 29),
+	[MT8188_VDO1_RST_DISP_RSZ2]			= MMSYS_RST_NR(1, 30),
+	[MT8188_VDO1_RST_DISP_RSZ3]			= MMSYS_RST_NR(1, 31),
+	[MT8188_VDO1_RST_HDR_VDO_FE0]			= MMSYS_RST_NR(2, 0),
+	[MT8188_VDO1_RST_HDR_GFX_FE0]			= MMSYS_RST_NR(2, 1),
+	[MT8188_VDO1_RST_HDR_VDO_BE]			= MMSYS_RST_NR(2, 2),
+	[MT8188_VDO1_RST_HDR_VDO_FE1]			= MMSYS_RST_NR(2, 16),
+	[MT8188_VDO1_RST_HDR_GFX_FE1]			= MMSYS_RST_NR(2, 17),
+	[MT8188_VDO1_RST_DISP_MIXER]			= MMSYS_RST_NR(2, 18),
+	[MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC]		= MMSYS_RST_NR(2, 19),
+	[MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC]		= MMSYS_RST_NR(2, 20),
+	[MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC]		= MMSYS_RST_NR(2, 21),
+	[MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC]		= MMSYS_RST_NR(2, 22),
+	[MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC]		= MMSYS_RST_NR(2, 23),
+};
+
 static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
 	{
 		DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index ace71cc714c4..04eccd8653db 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -87,6 +87,9 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
 	.clk_driver = "clk-mt8188-vdo0",
 	.routes = mmsys_mt8188_routing_table,
 	.num_routes = ARRAY_SIZE(mmsys_mt8188_routing_table),
+	.sw0_rst_offset = MT8188_VDO0_SW0_RST_B,
+	.rst_tb = mmsys_mt8188_vdo0_rst_tb,
+	.num_resets = ARRAY_SIZE(mmsys_mt8188_vdo0_rst_tb),
 };
 
 
@@ -94,7 +97,9 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys1_driver_data = {
 	.clk_driver = "clk-mt8188-vdo1",
 	.routes = mmsys_mt8188_vdo1_routing_table,
 	.num_routes = ARRAY_SIZE(mmsys_mt8188_vdo1_routing_table),
-	.num_resets = 96,
+	.sw0_rst_offset = MT8188_VDO1_SW0_RST_B,
+	.rst_tb = mmsys_mt8188_vdo1_rst_tb,
+	.num_resets = ARRAY_SIZE(mmsys_mt8188_vdo1_rst_tb),
 	.vsync_len = 1,
 };
 
-- 
2.39.2

[PATCH v4 11/14] drm/mediatek: Support MT8188 VDOSYS1 in display driver

[Hsiao Chien Sung]

- The mmsys_dev_num in MT8188 VDOSYS0 was set to 1 since
  VDOSYS1 was not available before. Increase it to support
  VDOSYS1 in display driver.
- Add compatible name for MT8188 VDOSYS1
  (shares the same driver data with MT8195 VDOSYS1)

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 6dcb4ba2466c..613093068bb4 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -287,6 +287,7 @@ static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
 static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
 	.main_path = mt8188_mtk_ddp_main,
 	.main_len = ARRAY_SIZE(mt8188_mtk_ddp_main),
+	.mmsys_dev_num = 2,
 };
 
 static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
@@ -327,6 +328,8 @@ static const struct of_device_id mtk_drm_of_ids[] = {
 	  .data = &mt8186_mmsys_driver_data},
 	{ .compatible = "mediatek,mt8188-vdosys0",
 	  .data = &mt8188_vdosys0_driver_data},
+	{ .compatible = "mediatek,mt8188-vdosys1",
+	  .data = &mt8195_vdosys1_driver_data},
 	{ .compatible = "mediatek,mt8192-mmsys",
 	  .data = &mt8192_mmsys_driver_data},
 	{ .compatible = "mediatek,mt8195-mmsys",
-- 
2.39.2

[PATCH v4 12/14] drm/mediatek: Improve compatibility of display driver

[Hsiao Chien Sung]

- Add new functions to enable/disable components, and
  reuse them when clock enable/disable
- Check if the component is defined before using it since
  some modules are MT8188 only (ex. PADDING)
- Control components according to its type rather than ID
- Use a for-loop to add/remove components in an arrays,
  so we can only maintain this array to make sure every
  component will be initialized properly

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 186 +++++++++---------
 1 file changed, 96 insertions(+), 90 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index c0a38f5217ee..69ae531294ff 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -51,6 +51,7 @@ enum mtk_ovl_adaptor_comp_id {
 
 struct ovl_adaptor_comp_match {
 	enum mtk_ovl_adaptor_comp_type type;
+	enum mtk_ddp_comp_id comp_id;
 	int alias_id;
 };
 
@@ -67,21 +68,78 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
 };
 
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
-	[OVL_ADAPTOR_MDP_RDMA0]	= { OVL_ADAPTOR_TYPE_RDMA, 0 },
-	[OVL_ADAPTOR_MDP_RDMA1]	= { OVL_ADAPTOR_TYPE_RDMA, 1 },
-	[OVL_ADAPTOR_MDP_RDMA2]	= { OVL_ADAPTOR_TYPE_RDMA, 2 },
-	[OVL_ADAPTOR_MDP_RDMA3]	= { OVL_ADAPTOR_TYPE_RDMA, 3 },
-	[OVL_ADAPTOR_MDP_RDMA4]	= { OVL_ADAPTOR_TYPE_RDMA, 4 },
-	[OVL_ADAPTOR_MDP_RDMA5]	= { OVL_ADAPTOR_TYPE_RDMA, 5 },
-	[OVL_ADAPTOR_MDP_RDMA6]	= { OVL_ADAPTOR_TYPE_RDMA, 6 },
-	[OVL_ADAPTOR_MDP_RDMA7]	= { OVL_ADAPTOR_TYPE_RDMA, 7 },
-	[OVL_ADAPTOR_MERGE0]	= { OVL_ADAPTOR_TYPE_MERGE, 1 },
-	[OVL_ADAPTOR_MERGE1]	= { OVL_ADAPTOR_TYPE_MERGE, 2 },
-	[OVL_ADAPTOR_MERGE2]	= { OVL_ADAPTOR_TYPE_MERGE, 3 },
-	[OVL_ADAPTOR_MERGE3]	= { OVL_ADAPTOR_TYPE_MERGE, 4 },
-	[OVL_ADAPTOR_ETHDR0]	= { OVL_ADAPTOR_TYPE_ETHDR, 0 },
+	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
+	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
+	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
+	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
+	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
+	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
+	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
+	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
+	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
+	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
+	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
+	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
+	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4 },
 };
 
+static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
+{
+	int ret = 0;
+
+	if (!dev)
+		goto end;
+
+	switch (type) {
+	case OVL_ADAPTOR_TYPE_ETHDR:
+		ret = mtk_ethdr_clk_enable(dev);
+		break;
+	case OVL_ADAPTOR_TYPE_MERGE:
+		ret = mtk_merge_clk_enable(dev);
+		break;
+	case OVL_ADAPTOR_TYPE_RDMA:
+		// only LARB users need to do this
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0) {
+			dev_err(dev, "Failed to enable power domain, error(%d)\n", ret);
+			goto end;
+		}
+		ret = mtk_mdp_rdma_clk_enable(dev);
+		if (ret)
+			pm_runtime_put(dev);
+		break;
+	default:
+		dev_err(dev, "Unknown type: %d\n", type);
+	}
+
+	if (ret)
+		dev_err(dev, "Failed to enable clock: error(%d)\n", ret);
+
+end:
+	return ret;
+}
+
+static void mtk_ovl_adaptor_disable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
+{
+	if (!dev)
+		return;
+
+	switch (type) {
+	case OVL_ADAPTOR_TYPE_ETHDR:
+		mtk_ethdr_clk_disable(dev);
+		break;
+	case OVL_ADAPTOR_TYPE_MERGE:
+		mtk_merge_clk_disable(dev);
+		break;
+	case OVL_ADAPTOR_TYPE_RDMA:
+		mtk_mdp_rdma_clk_disable(dev);
+		pm_runtime_put(dev);
+		break;
+	default:
+		dev_err(dev, "Unknown type: %d\n", type);
+	}
+}
+
 void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 				  struct mtk_plane_state *state,
 				  struct cmdq_pkt *cmdq_pkt)
@@ -186,72 +244,30 @@ void mtk_ovl_adaptor_stop(struct device *dev)
 int mtk_ovl_adaptor_clk_enable(struct device *dev)
 {
 	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
-	struct device *comp;
-	int ret;
+	int ret = 0;
 	int i;
 
-	for (i = 0; i < OVL_ADAPTOR_MERGE0; i++) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-		ret = pm_runtime_get_sync(comp);
-		if (ret < 0) {
-			dev_err(dev, "Failed to enable power domain %d, err %d\n", i, ret);
-			goto pwr_err;
-		}
-	}
-
 	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-
-		if (i < OVL_ADAPTOR_MERGE0)
-			ret = mtk_mdp_rdma_clk_enable(comp);
-		else if (i < OVL_ADAPTOR_ETHDR0)
-			ret = mtk_merge_clk_enable(comp);
-		else
-			ret = mtk_ethdr_clk_enable(comp);
+		ret = mtk_ovl_adaptor_enable(ovl_adaptor->ovl_adaptor_comp[i],
+					     comp_matches[i].type);
 		if (ret) {
-			dev_err(dev, "Failed to enable clock %d, err %d\n", i, ret);
-			goto clk_err;
+			while (--i >= 0)
+				mtk_ovl_adaptor_disable(ovl_adaptor->ovl_adaptor_comp[i],
+							comp_matches[i].type);
+			break;
 		}
 	}
-
-	return ret;
-
-clk_err:
-	while (--i >= 0) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-		if (i < OVL_ADAPTOR_MERGE0)
-			mtk_mdp_rdma_clk_disable(comp);
-		else if (i < OVL_ADAPTOR_ETHDR0)
-			mtk_merge_clk_disable(comp);
-		else
-			mtk_ethdr_clk_disable(comp);
-	}
-	i = OVL_ADAPTOR_MERGE0;
-
-pwr_err:
-	while (--i >= 0)
-		pm_runtime_put(ovl_adaptor->ovl_adaptor_comp[i]);
-
 	return ret;
 }
 
 void mtk_ovl_adaptor_clk_disable(struct device *dev)
 {
 	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
-	struct device *comp;
 	int i;
 
 	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-
-		if (i < OVL_ADAPTOR_MERGE0) {
-			mtk_mdp_rdma_clk_disable(comp);
-			pm_runtime_put(comp);
-		} else if (i < OVL_ADAPTOR_ETHDR0) {
-			mtk_merge_clk_disable(comp);
-		} else {
-			mtk_ethdr_clk_disable(comp);
-		}
+		mtk_ovl_adaptor_disable(ovl_adaptor->ovl_adaptor_comp[i],
+					comp_matches[i].type);
 	}
 }
 
@@ -313,36 +329,26 @@ size_t mtk_ovl_adaptor_get_num_formats(struct device *dev)
 
 void mtk_ovl_adaptor_add_comp(struct device *dev, struct mtk_mutex *mutex)
 {
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA0);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA1);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA2);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA3);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA4);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA5);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA6);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA7);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE1);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE2);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE3);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE4);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		if (!ovl_adaptor->ovl_adaptor_comp[i])
+			continue;
+		mtk_mutex_add_comp(mutex, comp_matches[i].comp_id);
+	}
 }
 
 void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex)
 {
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA0);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA1);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA2);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA3);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA4);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA5);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA6);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA7);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE1);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE2);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE3);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE4);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		if (!ovl_adaptor->ovl_adaptor_comp[i])
+			continue;
+		mtk_mutex_remove_comp(mutex, comp_matches[i].comp_id);
+	}
 }
 
 void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsigned int next)
-- 
2.39.2

[PATCH v4 13/14] drm/mediatek: Sort OVL adaptor components in alphabetical order

[Hsiao Chien Sung]

- Rename OVL_ADAPTOR_TYPE_RDMA to OVL_ADAPTOR_TYPE_MDP_RDMA
  to align the naming rule of mtk_ovl_adaptor_comp_id.
- Sort components' names in alphabetical order
- Sort device table in alphabetical order
- Add sentinel to device table

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 61 ++++++++-----------
 1 file changed, 27 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 69ae531294ff..4120d08e4969 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -26,13 +26,14 @@
 #define MTK_OVL_ADAPTOR_LAYER_NUM 4
 
 enum mtk_ovl_adaptor_comp_type {
-	OVL_ADAPTOR_TYPE_RDMA = 0,
-	OVL_ADAPTOR_TYPE_MERGE,
 	OVL_ADAPTOR_TYPE_ETHDR,
+	OVL_ADAPTOR_TYPE_MDP_RDMA,
+	OVL_ADAPTOR_TYPE_MERGE,
 	OVL_ADAPTOR_TYPE_NUM,
 };
 
 enum mtk_ovl_adaptor_comp_id {
+	OVL_ADAPTOR_ETHDR0,
 	OVL_ADAPTOR_MDP_RDMA0,
 	OVL_ADAPTOR_MDP_RDMA1,
 	OVL_ADAPTOR_MDP_RDMA2,
@@ -45,7 +46,6 @@ enum mtk_ovl_adaptor_comp_id {
 	OVL_ADAPTOR_MERGE1,
 	OVL_ADAPTOR_MERGE2,
 	OVL_ADAPTOR_MERGE3,
-	OVL_ADAPTOR_ETHDR0,
 	OVL_ADAPTOR_ID_MAX
 };
 
@@ -62,21 +62,21 @@ struct mtk_disp_ovl_adaptor {
 };
 
 static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
-	[OVL_ADAPTOR_TYPE_RDMA]		= "vdo1-rdma",
-	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
 	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
+	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
+	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
 };
 
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
 	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
-	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
-	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
-	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
-	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
-	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
-	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
-	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
-	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
+	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
+	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
+	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
+	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
+	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
+	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
+	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
+	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
 	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
 	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
 	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
@@ -94,10 +94,7 @@ static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_
 	case OVL_ADAPTOR_TYPE_ETHDR:
 		ret = mtk_ethdr_clk_enable(dev);
 		break;
-	case OVL_ADAPTOR_TYPE_MERGE:
-		ret = mtk_merge_clk_enable(dev);
-		break;
-	case OVL_ADAPTOR_TYPE_RDMA:
+	case OVL_ADAPTOR_TYPE_MDP_RDMA:
 		// only LARB users need to do this
 		ret = pm_runtime_get_sync(dev);
 		if (ret < 0) {
@@ -108,6 +105,9 @@ static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_
 		if (ret)
 			pm_runtime_put(dev);
 		break;
+	case OVL_ADAPTOR_TYPE_MERGE:
+		ret = mtk_merge_clk_enable(dev);
+		break;
 	default:
 		dev_err(dev, "Unknown type: %d\n", type);
 	}
@@ -128,13 +128,13 @@ static void mtk_ovl_adaptor_disable(struct device *dev, enum mtk_ovl_adaptor_com
 	case OVL_ADAPTOR_TYPE_ETHDR:
 		mtk_ethdr_clk_disable(dev);
 		break;
-	case OVL_ADAPTOR_TYPE_MERGE:
-		mtk_merge_clk_disable(dev);
-		break;
-	case OVL_ADAPTOR_TYPE_RDMA:
+	case OVL_ADAPTOR_TYPE_MDP_RDMA:
 		mtk_mdp_rdma_clk_disable(dev);
 		pm_runtime_put(dev);
 		break;
+	case OVL_ADAPTOR_TYPE_MERGE:
+		mtk_merge_clk_disable(dev);
+		break;
 	default:
 		dev_err(dev, "Unknown type: %d\n", type);
 	}
@@ -353,6 +353,7 @@ void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex)
 
 void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsigned int next)
 {
+	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2);
@@ -360,11 +361,11 @@ void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsig
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER);
-	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 }
 
 void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev, unsigned int next)
 {
+	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2);
@@ -372,7 +373,6 @@ void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev, un
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER);
-	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 }
 
 static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
@@ -391,17 +391,10 @@ static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
 }
 
 static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
-	{
-		.compatible = "mediatek,mt8195-vdo1-rdma",
-		.data = (void *)OVL_ADAPTOR_TYPE_RDMA,
-	}, {
-		.compatible = "mediatek,mt8195-disp-merge",
-		.data = (void *)OVL_ADAPTOR_TYPE_MERGE,
-	}, {
-		.compatible = "mediatek,mt8195-disp-ethdr",
-		.data = (void *)OVL_ADAPTOR_TYPE_ETHDR,
-	},
-	{},
+	{ .compatible = "mediatek,mt8195-disp-ethdr", .data = (void *)OVL_ADAPTOR_TYPE_ETHDR },
+	{ .compatible = "mediatek,mt8195-disp-merge", .data = (void *)OVL_ADAPTOR_TYPE_MERGE },
+	{ .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA },
+	{ /* sentinel */ }
 };
 
 static int compare_of(struct device *dev, void *data)
-- 
2.39.2

[PATCH v4 14/14] drm/mediatek: Support MT8188 Padding in display driver

[Hsiao Chien Sung]

Padding is a new display module on MT8188, it provides ability
to add pixels to width and height of a layer with specified colors.

Due to hardware design, Mixer in VDOSYS1 requires width of a layer
to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
we need Padding to deal with odd width.

Please notice that even if the Padding is in bypass mode,
settings in register must be cleared to 0,
or undefined behaviors could happen.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile             |   3 +-
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |   3 +
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   |  34 +++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |   1 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.h        |   2 +-
 drivers/gpu/drm/mediatek/mtk_padding.c        | 136 ++++++++++++++++++
 6 files changed, 177 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index d4d193f60271..5e4436403b8d 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -16,7 +16,8 @@ mediatek-drm-y := mtk_disp_aal.o \
 		  mtk_dsi.o \
 		  mtk_dpi.o \
 		  mtk_ethdr.o \
-		  mtk_mdp_rdma.o
+		  mtk_mdp_rdma.o \
+		  mtk_padding.o
 
 obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 2254038519e1..f9fdb1268aa5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -157,4 +157,7 @@ void mtk_mdp_rdma_config(struct device *dev, struct mtk_mdp_rdma_cfg *cfg,
 const u32 *mtk_mdp_rdma_get_formats(struct device *dev);
 size_t mtk_mdp_rdma_get_num_formats(struct device *dev);
 
+int mtk_padding_clk_enable(struct device *dev);
+void mtk_padding_clk_disable(struct device *dev);
+void mtk_padding_config(struct device *dev, struct cmdq_pkt *cmdq_pkt);
 #endif
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 4120d08e4969..5b7895f3324a 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -29,6 +29,7 @@ enum mtk_ovl_adaptor_comp_type {
 	OVL_ADAPTOR_TYPE_ETHDR,
 	OVL_ADAPTOR_TYPE_MDP_RDMA,
 	OVL_ADAPTOR_TYPE_MERGE,
+	OVL_ADAPTOR_TYPE_PADDING,
 	OVL_ADAPTOR_TYPE_NUM,
 };
 
@@ -46,6 +47,14 @@ enum mtk_ovl_adaptor_comp_id {
 	OVL_ADAPTOR_MERGE1,
 	OVL_ADAPTOR_MERGE2,
 	OVL_ADAPTOR_MERGE3,
+	OVL_ADAPTOR_PADDING0,
+	OVL_ADAPTOR_PADDING1,
+	OVL_ADAPTOR_PADDING2,
+	OVL_ADAPTOR_PADDING3,
+	OVL_ADAPTOR_PADDING4,
+	OVL_ADAPTOR_PADDING5,
+	OVL_ADAPTOR_PADDING6,
+	OVL_ADAPTOR_PADDING7,
 	OVL_ADAPTOR_ID_MAX
 };
 
@@ -65,6 +74,7 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
 	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
 	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
 	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
+	[OVL_ADAPTOR_TYPE_PADDING]	= "padding",
 };
 
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
@@ -81,6 +91,14 @@ static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
 	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
 	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
 	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4 },
+	[OVL_ADAPTOR_PADDING0] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING0, 0 },
+	[OVL_ADAPTOR_PADDING1] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING1, 1 },
+	[OVL_ADAPTOR_PADDING2] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING2, 2 },
+	[OVL_ADAPTOR_PADDING3] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING3, 3 },
+	[OVL_ADAPTOR_PADDING4] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING4, 4 },
+	[OVL_ADAPTOR_PADDING5] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING5, 5 },
+	[OVL_ADAPTOR_PADDING6] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING6, 6 },
+	[OVL_ADAPTOR_PADDING7] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING7, 7 },
 };
 
 static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
@@ -108,6 +126,9 @@ static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_
 	case OVL_ADAPTOR_TYPE_MERGE:
 		ret = mtk_merge_clk_enable(dev);
 		break;
+	case OVL_ADAPTOR_TYPE_PADDING:
+		ret = mtk_padding_clk_enable(dev);
+		break;
 	default:
 		dev_err(dev, "Unknown type: %d\n", type);
 	}
@@ -135,6 +156,9 @@ static void mtk_ovl_adaptor_disable(struct device *dev, enum mtk_ovl_adaptor_com
 	case OVL_ADAPTOR_TYPE_MERGE:
 		mtk_merge_clk_disable(dev);
 		break;
+	case OVL_ADAPTOR_TYPE_PADDING:
+		mtk_padding_clk_disable(dev);
+		break;
 	default:
 		dev_err(dev, "Unknown type: %d\n", type);
 	}
@@ -151,6 +175,8 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 	struct device *rdma_r;
 	struct device *merge;
 	struct device *ethdr;
+	struct device *padding_l;
+	struct device *padding_r;
 	const struct drm_format_info *fmt_info = drm_format_info(pending->format);
 	bool use_dual_pipe = false;
 	unsigned int align_width;
@@ -167,6 +193,8 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 	rdma_r = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 + 2 * idx + 1];
 	merge = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MERGE0 + idx];
 	ethdr = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0];
+	padding_l = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_PADDING0 + 2 * idx];
+	padding_r = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_PADDING0 + 2 * idx + 1];
 
 	if (!pending->enable) {
 		mtk_merge_stop_cmdq(merge, cmdq_pkt);
@@ -200,10 +228,15 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 	rdma_config.color_encoding = pending->color_encoding;
 	mtk_mdp_rdma_config(rdma_l, &rdma_config, cmdq_pkt);
 
+	if (padding_l)
+		mtk_padding_config(padding_l, cmdq_pkt);
+
 	if (use_dual_pipe) {
 		rdma_config.x_left = l_w;
 		rdma_config.width = r_w;
 		mtk_mdp_rdma_config(rdma_r, &rdma_config, cmdq_pkt);
+		if (padding_r)
+			mtk_padding_config(padding_r, cmdq_pkt);
 	}
 
 	mtk_merge_start_cmdq(merge, cmdq_pkt);
@@ -391,6 +424,7 @@ static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
 }
 
 static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
+	{ .compatible = "mediatek,mt8188-padding", .data = (void *)OVL_ADAPTOR_TYPE_PADDING },
 	{ .compatible = "mediatek,mt8195-disp-ethdr", .data = (void *)OVL_ADAPTOR_TYPE_ETHDR },
 	{ .compatible = "mediatek,mt8195-disp-merge", .data = (void *)OVL_ADAPTOR_TYPE_MERGE },
 	{ .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA },
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 613093068bb4..ed5b5b8d6c2e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -977,6 +977,7 @@ static struct platform_driver * const mtk_drm_drivers[] = {
 	&mtk_dsi_driver,
 	&mtk_ethdr_driver,
 	&mtk_mdp_rdma_driver,
+	&mtk_padding_driver,
 };
 
 static int __init mtk_drm_init(void)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index eb2fd45941f0..562f2db47add 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -64,5 +64,5 @@ extern struct platform_driver mtk_dpi_driver;
 extern struct platform_driver mtk_dsi_driver;
 extern struct platform_driver mtk_ethdr_driver;
 extern struct platform_driver mtk_mdp_rdma_driver;
-
+extern struct platform_driver mtk_padding_driver;
 #endif /* MTK_DRM_DRV_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_padding.c b/drivers/gpu/drm/mediatek/mtk_padding.c
new file mode 100644
index 000000000000..bbb9c5e286ce
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_padding.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
+#include "mtk_disp_drv.h"
+#include "mtk_drm_crtc.h"
+#include "mtk_drm_ddp_comp.h"
+
+/**
+ * struct mtk_padding - basic information of Padding
+ * @clk: Clock of the module
+ * @regs: Virtual address of the Padding for CPU to access
+ * @cmdq_reg: CMDQ setting of the Padding
+ *
+ * Every Padding should have different clock source, register base, and
+ * CMDQ settings, we stored these differences all together.
+ */
+struct mtk_padding {
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct cmdq_client_reg	cmdq_reg;
+};
+
+int mtk_padding_clk_enable(struct device *dev)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(padding->clk);
+}
+
+void mtk_padding_clk_disable(struct device *dev)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(padding->clk);
+}
+
+void mtk_padding_config(struct device *dev, struct cmdq_pkt *cmdq_pkt)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	/* bypass padding */
+	mtk_ddp_write_mask(cmdq_pkt, GENMASK(1, 0), &padding->cmdq_reg, padding->regs, 0,
+			   GENMASK(1, 0));
+}
+
+static int mtk_padding_bind(struct device *dev, struct device *master, void *data)
+{
+	return 0;
+}
+
+static void mtk_padding_unbind(struct device *dev, struct device *master, void *data)
+{
+}
+
+static const struct component_ops mtk_padding_component_ops = {
+	.bind	= mtk_padding_bind,
+	.unbind = mtk_padding_unbind,
+};
+
+static int mtk_padding_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_padding *priv;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clk\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	priv->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->regs)) {
+		dev_err(dev, "failed to do ioremap\n");
+		return PTR_ERR(priv->regs);
+	}
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &priv->cmdq_reg, 0);
+	if (ret) {
+		dev_err(dev, "failed to get gce client reg\n");
+		return ret;
+	}
+#endif
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
+
+	ret = component_add(dev, &mtk_padding_component_ops);
+	if (ret) {
+		pm_runtime_disable(dev);
+		return dev_err_probe(dev, ret, "failed to add component\n");
+	}
+
+	return 0;
+}
+
+static int mtk_padding_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &mtk_padding_component_ops);
+	return 0;
+}
+
+static const struct of_device_id mtk_padding_driver_dt_match[] = {
+	{ .compatible = "mediatek,mt8188-padding" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_padding_driver_dt_match);
+
+struct platform_driver mtk_padding_driver = {
+	.probe		= mtk_padding_probe,
+	.remove		= mtk_padding_remove,
+	.driver		= {
+		.name	= "mediatek-padding",
+		.owner	= THIS_MODULE,
+		.of_match_table = mtk_padding_driver_dt_match,
+	},
+};
-- 
2.39.2

Re: [PATCH v4 04/14] dt-bindings: display: mediatek: padding: Add MT8188

[Krzysztof Kozlowski]

On 21/06/2023 05:19, Hsiao Chien Sung wrote:
> Padding is a new hardware module on MediaTek MT8188,
> add dt-bindings for it.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


---

This is an automated instruction, just in case, because many review tags
are being ignored. If you do not know the process, here is a short
explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tools like b4 can help
here. However, there's no need to repost patches *only* to add the tags.
The upstream maintainer will do that for acks received on the version
they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

Best regards,
Krzysztof

Re: [PATCH v4 06/14] dt-bindings: reset: mt8188: Add VDOSYS reset control bits

[Krzysztof Kozlowski]

On 21/06/2023 05:19, Hsiao Chien Sung wrote:
> Add MT8188 VDOSYS0 and VDOSYS1 reset control bits.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v4 09/14] soc: mediatek: Support reset bit mapping in mmsys driver

[AngeloGioacchino Del Regno]

Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
> - Reset ID must starts from 0 and be consecutive, but
>    the reset bits in our hardware design is not continuous,
>    some bits are left unused, we need a map to solve the problem
> - Use old style 1-to-1 mapping if .rst_tb is not defined
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v4 10/14] soc: mediatek: Add MT8188 VDOSYS reset bit map

[AngeloGioacchino Del Regno]

Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
> Add MT8188 reset bit map for VDOSYS0 and VDOSYS1.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v4 12/14] drm/mediatek: Improve compatibility of display driver

[AngeloGioacchino Del Regno]

Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
> - Add new functions to enable/disable components, and
>    reuse them when clock enable/disable
> - Check if the component is defined before using it since
>    some modules are MT8188 only (ex. PADDING)
> - Control components according to its type rather than ID
> - Use a for-loop to add/remove components in an arrays,
>    so we can only maintain this array to make sure every
>    component will be initialized properly
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>   .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 186 +++++++++---------
>   1 file changed, 96 insertions(+), 90 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index c0a38f5217ee..69ae531294ff 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -51,6 +51,7 @@ enum mtk_ovl_adaptor_comp_id {
>   
>   struct ovl_adaptor_comp_match {
>   	enum mtk_ovl_adaptor_comp_type type;
> +	enum mtk_ddp_comp_id comp_id;
>   	int alias_id;
>   };
>   
> @@ -67,21 +68,78 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
>   };
>   
>   static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
> -	[OVL_ADAPTOR_MDP_RDMA0]	= { OVL_ADAPTOR_TYPE_RDMA, 0 },
> -	[OVL_ADAPTOR_MDP_RDMA1]	= { OVL_ADAPTOR_TYPE_RDMA, 1 },
> -	[OVL_ADAPTOR_MDP_RDMA2]	= { OVL_ADAPTOR_TYPE_RDMA, 2 },
> -	[OVL_ADAPTOR_MDP_RDMA3]	= { OVL_ADAPTOR_TYPE_RDMA, 3 },
> -	[OVL_ADAPTOR_MDP_RDMA4]	= { OVL_ADAPTOR_TYPE_RDMA, 4 },
> -	[OVL_ADAPTOR_MDP_RDMA5]	= { OVL_ADAPTOR_TYPE_RDMA, 5 },
> -	[OVL_ADAPTOR_MDP_RDMA6]	= { OVL_ADAPTOR_TYPE_RDMA, 6 },
> -	[OVL_ADAPTOR_MDP_RDMA7]	= { OVL_ADAPTOR_TYPE_RDMA, 7 },
> -	[OVL_ADAPTOR_MERGE0]	= { OVL_ADAPTOR_TYPE_MERGE, 1 },
> -	[OVL_ADAPTOR_MERGE1]	= { OVL_ADAPTOR_TYPE_MERGE, 2 },
> -	[OVL_ADAPTOR_MERGE2]	= { OVL_ADAPTOR_TYPE_MERGE, 3 },
> -	[OVL_ADAPTOR_MERGE3]	= { OVL_ADAPTOR_TYPE_MERGE, 4 },
> -	[OVL_ADAPTOR_ETHDR0]	= { OVL_ADAPTOR_TYPE_ETHDR, 0 },
> +	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
> +	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
> +	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
> +	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
> +	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
> +	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
> +	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
> +	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
> +	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
> +	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
> +	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
> +	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
> +	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4 },
>   };
>   
> +static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
> +{
> +	int ret = 0;

int ret;

> +
> +	if (!dev)

if (!dev)
	return -ENODEV;

> +		goto end;
> +
> +	switch (type) {
> +	case OVL_ADAPTOR_TYPE_ETHDR:
> +		ret = mtk_ethdr_clk_enable(dev);
> +		break;
> +	case OVL_ADAPTOR_TYPE_MERGE:
> +		ret = mtk_merge_clk_enable(dev);

We already have a .clk_enable() callback in struct mtk_ddp_comp_funcs: to
greatly enhance your nice cleanup, you could use that instead, which basically
eliminates the need of having any if branch and/or switch.

> +		break;
> +	case OVL_ADAPTOR_TYPE_RDMA:
> +		// only LARB users need to do this

Please, C-style comments only.

> +		ret = pm_runtime_get_sync(dev);
> +		if (ret < 0) {
> +			dev_err(dev, "Failed to enable power domain, error(%d)\n", ret);
> +			goto end;
> +		}
> +		ret = mtk_mdp_rdma_clk_enable(dev);
> +		if (ret)
> +			pm_runtime_put(dev);
> +		break;
> +	default:
> +		dev_err(dev, "Unknown type: %d\n", type);

Are we supposed to return 0 for unknown type?!

> +	}
> +
> +	if (ret)
> +		dev_err(dev, "Failed to enable clock: error(%d)\n", ret);

if (ret) {
	dev_err(...)
	return ret;
}

return 0;

> +
> +end:
> +	return ret;
> +}
> +
> +static void mtk_ovl_adaptor_disable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
> +{
> +	if (!dev)
> +		return;
> +
> +	switch (type) {
> +	case OVL_ADAPTOR_TYPE_ETHDR:
> +		mtk_ethdr_clk_disable(dev);
> +		break;
> +	case OVL_ADAPTOR_TYPE_MERGE:
> +		mtk_merge_clk_disable(dev);
> +		break;
> +	case OVL_ADAPTOR_TYPE_RDMA:
> +		mtk_mdp_rdma_clk_disable(dev);
> +		pm_runtime_put(dev);
> +		break;
> +	default:
> +		dev_err(dev, "Unknown type: %d\n", type);
> +	}
> +}
> +
>   void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
>   				  struct mtk_plane_state *state,
>   				  struct cmdq_pkt *cmdq_pkt)
> @@ -186,72 +244,30 @@ void mtk_ovl_adaptor_stop(struct device *dev)
>   int mtk_ovl_adaptor_clk_enable(struct device *dev)
>   {
>   	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
> -	struct device *comp;
> -	int ret;
> +	int ret = 0;

Keep `int ret;`

>   	int i;
>   
> -	for (i = 0; i < OVL_ADAPTOR_MERGE0; i++) {
> -		comp = ovl_adaptor->ovl_adaptor_comp[i];
> -		ret = pm_runtime_get_sync(comp);
> -		if (ret < 0) {
> -			dev_err(dev, "Failed to enable power domain %d, err %d\n", i, ret);
> -			goto pwr_err;
> -		}
> -	}
> -
>   	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> -		comp = ovl_adaptor->ovl_adaptor_comp[i];
> -
> -		if (i < OVL_ADAPTOR_MERGE0)
> -			ret = mtk_mdp_rdma_clk_enable(comp);
> -		else if (i < OVL_ADAPTOR_ETHDR0)
> -			ret = mtk_merge_clk_enable(comp);
> -		else
> -			ret = mtk_ethdr_clk_enable(comp);
> +		ret = mtk_ovl_adaptor_enable(ovl_adaptor->ovl_adaptor_comp[i],
> +					     comp_matches[i].type);
>   		if (ret) {
> -			dev_err(dev, "Failed to enable clock %d, err %d\n", i, ret);
> -			goto clk_err;
> +			while (--i >= 0)
> +				mtk_ovl_adaptor_disable(ovl_adaptor->ovl_adaptor_comp[i],
> +							comp_matches[i].type);
> +			break;

Instead of a break here, just return ret?

>   		}
>   	}
> -
> -	return ret;
> -
> -clk_err:
> -	while (--i >= 0) {
> -		comp = ovl_adaptor->ovl_adaptor_comp[i];
> -		if (i < OVL_ADAPTOR_MERGE0)
> -			mtk_mdp_rdma_clk_disable(comp);
> -		else if (i < OVL_ADAPTOR_ETHDR0)
> -			mtk_merge_clk_disable(comp);
> -		else
> -			mtk_ethdr_clk_disable(comp);
> -	}
> -	i = OVL_ADAPTOR_MERGE0;
> -
> -pwr_err:
> -	while (--i >= 0)
> -		pm_runtime_put(ovl_adaptor->ovl_adaptor_comp[i]);
> -
>   	return ret;

...and return 0 here.

>   }
>   

Regards,
Angelo

Re: [PATCH v4 13/14] drm/mediatek: Sort OVL adaptor components in alphabetical order

[AngeloGioacchino Del Regno]

Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
> - Rename OVL_ADAPTOR_TYPE_RDMA to OVL_ADAPTOR_TYPE_MDP_RDMA
>    to align the naming rule of mtk_ovl_adaptor_comp_id.
> - Sort components' names in alphabetical order
> - Sort device table in alphabetical order
> - Add sentinel to device table
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>

I agree, but this commit should come before [12/14] of this series.

Regards,
Angelo

> ---
>   .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 61 ++++++++-----------
>   1 file changed, 27 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index 69ae531294ff..4120d08e4969 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -26,13 +26,14 @@
>   #define MTK_OVL_ADAPTOR_LAYER_NUM 4
>   
>   enum mtk_ovl_adaptor_comp_type {
> -	OVL_ADAPTOR_TYPE_RDMA = 0,
> -	OVL_ADAPTOR_TYPE_MERGE,
>   	OVL_ADAPTOR_TYPE_ETHDR,
> +	OVL_ADAPTOR_TYPE_MDP_RDMA,
> +	OVL_ADAPTOR_TYPE_MERGE,
>   	OVL_ADAPTOR_TYPE_NUM,
>   };
>   
>   enum mtk_ovl_adaptor_comp_id {
> +	OVL_ADAPTOR_ETHDR0,
>   	OVL_ADAPTOR_MDP_RDMA0,
>   	OVL_ADAPTOR_MDP_RDMA1,
>   	OVL_ADAPTOR_MDP_RDMA2,
> @@ -45,7 +46,6 @@ enum mtk_ovl_adaptor_comp_id {
>   	OVL_ADAPTOR_MERGE1,
>   	OVL_ADAPTOR_MERGE2,
>   	OVL_ADAPTOR_MERGE3,
> -	OVL_ADAPTOR_ETHDR0,
>   	OVL_ADAPTOR_ID_MAX
>   };
>   
> @@ -62,21 +62,21 @@ struct mtk_disp_ovl_adaptor {
>   };
>   
>   static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
> -	[OVL_ADAPTOR_TYPE_RDMA]		= "vdo1-rdma",
> -	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
>   	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
> +	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
> +	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
>   };
>   
>   static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
>   	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
> -	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
> -	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
> -	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
> -	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
> -	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
> -	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
> -	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
> -	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
> +	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
> +	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
> +	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
> +	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
> +	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
> +	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
> +	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
> +	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
>   	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
>   	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
>   	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
> @@ -94,10 +94,7 @@ static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_
>   	case OVL_ADAPTOR_TYPE_ETHDR:
>   		ret = mtk_ethdr_clk_enable(dev);
>   		break;
> -	case OVL_ADAPTOR_TYPE_MERGE:
> -		ret = mtk_merge_clk_enable(dev);
> -		break;
> -	case OVL_ADAPTOR_TYPE_RDMA:
> +	case OVL_ADAPTOR_TYPE_MDP_RDMA:
>   		// only LARB users need to do this
>   		ret = pm_runtime_get_sync(dev);
>   		if (ret < 0) {
> @@ -108,6 +105,9 @@ static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_
>   		if (ret)
>   			pm_runtime_put(dev);
>   		break;
> +	case OVL_ADAPTOR_TYPE_MERGE:
> +		ret = mtk_merge_clk_enable(dev);
> +		break;
>   	default:
>   		dev_err(dev, "Unknown type: %d\n", type);
>   	}
> @@ -128,13 +128,13 @@ static void mtk_ovl_adaptor_disable(struct device *dev, enum mtk_ovl_adaptor_com
>   	case OVL_ADAPTOR_TYPE_ETHDR:
>   		mtk_ethdr_clk_disable(dev);
>   		break;
> -	case OVL_ADAPTOR_TYPE_MERGE:
> -		mtk_merge_clk_disable(dev);
> -		break;
> -	case OVL_ADAPTOR_TYPE_RDMA:
> +	case OVL_ADAPTOR_TYPE_MDP_RDMA:
>   		mtk_mdp_rdma_clk_disable(dev);
>   		pm_runtime_put(dev);
>   		break;
> +	case OVL_ADAPTOR_TYPE_MERGE:
> +		mtk_merge_clk_disable(dev);
> +		break;
>   	default:
>   		dev_err(dev, "Unknown type: %d\n", type);
>   	}
> @@ -353,6 +353,7 @@ void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex)
>   
>   void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsigned int next)
>   {
> +	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
>   	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1);
>   	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1);
>   	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2);
> @@ -360,11 +361,11 @@ void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsig
>   	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER);
>   	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER);
>   	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER);
> -	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
>   }
>   
>   void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev, unsigned int next)
>   {
> +	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
>   	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1);
>   	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1);
>   	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2);
> @@ -372,7 +373,6 @@ void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev, un
>   	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER);
>   	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER);
>   	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER);
> -	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
>   }
>   
>   static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
> @@ -391,17 +391,10 @@ static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
>   }
>   
>   static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
> -	{
> -		.compatible = "mediatek,mt8195-vdo1-rdma",
> -		.data = (void *)OVL_ADAPTOR_TYPE_RDMA,
> -	}, {
> -		.compatible = "mediatek,mt8195-disp-merge",
> -		.data = (void *)OVL_ADAPTOR_TYPE_MERGE,
> -	}, {
> -		.compatible = "mediatek,mt8195-disp-ethdr",
> -		.data = (void *)OVL_ADAPTOR_TYPE_ETHDR,
> -	},
> -	{},
> +	{ .compatible = "mediatek,mt8195-disp-ethdr", .data = (void *)OVL_ADAPTOR_TYPE_ETHDR },
> +	{ .compatible = "mediatek,mt8195-disp-merge", .data = (void *)OVL_ADAPTOR_TYPE_MERGE },
> +	{ .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA },
> +	{ /* sentinel */ }
>   };
>   
>   static int compare_of(struct device *dev, void *data)

Re: [PATCH v4 13/14] drm/mediatek: Sort OVL adaptor components in alphabetical order

[Shawn Sung (宋孝謙)]

On Wed, 2023-06-21 at 10:16 +0200, AngeloGioacchino Del Regno wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
> > - Rename OVL_ADAPTOR_TYPE_RDMA to OVL_ADAPTOR_TYPE_MDP_RDMA
> >    to align the naming rule of mtk_ovl_adaptor_comp_id.
> > - Sort components' names in alphabetical order
> > - Sort device table in alphabetical order
> > - Add sentinel to device table
> > 
> > Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> 
> I agree, but this commit should come before [12/14] of this series.

Got it. Since [12/14] removed many lines that use component ID/type
(for example, in mtk_ovl_adaptor_clk_enable() or
mtk_ovl_adaptor_add_comp()), if this commit has to move before that,
should I still modify them and delete them in [12/14]? Thanks.

> 
> Regards,
> Angelo
> 

Best regards,
Hsiao Chien Sung

Re: [PATCH v4 13/14] drm/mediatek: Sort OVL adaptor components in alphabetical order

[AngeloGioacchino Del Regno]

Il 21/06/23 11:16, Shawn Sung (宋孝謙) ha scritto:
> On Wed, 2023-06-21 at 10:16 +0200, AngeloGioacchino Del Regno wrote:
>>   	
>> External email : Please do not click links or open attachments until
>> you have verified the sender or the content.
>>   Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
>>> - Rename OVL_ADAPTOR_TYPE_RDMA to OVL_ADAPTOR_TYPE_MDP_RDMA
>>>     to align the naming rule of mtk_ovl_adaptor_comp_id.
>>> - Sort components' names in alphabetical order
>>> - Sort device table in alphabetical order
>>> - Add sentinel to device table
>>>
>>> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
>>
>> I agree, but this commit should come before [12/14] of this series.
> 
> Got it. Since [12/14] removed many lines that use component ID/type
> (for example, in mtk_ovl_adaptor_clk_enable() or
> mtk_ovl_adaptor_add_comp()), if this commit has to move before that,
> should I still modify them and delete them in [12/14]? Thanks.
> 

Every commit has to work on its own, so you first perform the renaming in
one commit, then you modify and delete.


>>
>> Regards,
>> Angelo
>>
> 
> Best regards,
> Hsiao Chien Sung

Re: [PATCH v4 12/14] drm/mediatek: Improve compatibility of display driver

[Shawn Sung (宋孝謙)]

On Wed, 2023-06-21 at 10:15 +0200, AngeloGioacchino Del Regno wrote:
> >     
> > >   
> > > +static int mtk_ovl_adaptor_enable(struct device *dev, enum
> > mtk_ovl_adaptor_comp_type type)
> > > +{
> > > +int ret = 0;
> >
> > int ret;
> >
> > > +
> > > +if (!dev)
> >
> > if (!dev)
> > return -ENODEV;
> >

We intentionally ignored null dev and didn't return error here, since
MT8195 and MT8188 shares the same component list, there could be
components that are not probed and therefore is null here (For
example, the new hardware Padding in MT8188 only).
 
> > > +goto end;
> > > +
> > > +switch (type) {
> > > +case OVL_ADAPTOR_TYPE_ETHDR:
> > > +ret = mtk_ethdr_clk_enable(dev);
> > > +break;
> > > +case OVL_ADAPTOR_TYPE_MERGE:
> > > +ret = mtk_merge_clk_enable(dev);
> >
> > We already have a .clk_enable() callback in struct
> > mtk_ddp_comp_funcs: to
> > greatly enhance your nice cleanup, you could use that instead,
> which
> > basically
> > eliminates the need of having any if branch and/or switch.
> >

Thanks for the advice, submitted a new version using
mtk_ddp_comp_funcs.
 
> > > +break;
> > > +case OVL_ADAPTOR_TYPE_RDMA:
> > > +// only LARB users need to do this
> >
> > Please, C-style comments only.
> >
> > > +ret = pm_runtime_get_sync(dev);
> > > +if (ret < 0) {
> > > +dev_err(dev, "Failed to enable power domain, error(%d)\n", ret);
> > > +goto end;
> > > +}
> > > +ret = mtk_mdp_rdma_clk_enable(dev);
> > > +if (ret)
> > > +pm_runtime_put(dev);
> > > +break;
> > > +default:
> > > +dev_err(dev, "Unknown type: %d\n", type);
> >
> > Are we supposed to return 0 for unknown type?!
> >

Yes, we ignored the unknown type intentionally, but this part has been
removed in the new patch since 'switch' are all removed after re-using
mtk_ddp_comp_funcs.
 
> > >   for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> > > -comp = ovl_adaptor->ovl_adaptor_comp[i];
> > > -
> > > -if (i < OVL_ADAPTOR_MERGE0)
> > > -ret = mtk_mdp_rdma_clk_enable(comp);
> > > -else if (i < OVL_ADAPTOR_ETHDR0)
> > > -ret = mtk_merge_clk_enable(comp);
> > > -else
> > > -ret = mtk_ethdr_clk_enable(comp);
> > > +ret = mtk_ovl_adaptor_enable(ovl_adaptor->ovl_adaptor_comp[i],
> > > +     comp_matches[i].type);
> > >   if (ret) {
> > > -dev_err(dev, "Failed to enable clock %d, err %d\n", i, ret);
> > > -goto clk_err;
> > > +while (--i >= 0)
> > > +mtk_ovl_adaptor_disable(ovl_adaptor->ovl_adaptor_comp[i],
> > > +comp_matches[i].type);
> > > +break;
> >
> > Instead of a break here, just return ret?

Got it, has submitted a new version that returns the error immediately.
 
The reason we break here instead of returning error, is trying to make
one function only has one return. For example, always return at the end
of a function, so if someday we add a printk() at somewhere in that
function for debugging, it won't be skipped by the 'return' before it.
 
Not sure if this convention is not recommended when writing kernel
codes? Thanks.
 
Regards,
Hsiao Chien Sung