* [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies
[not found] <Message-Id: <20230913113247.91749-1-abbotti@mev.co.uk>
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
` (14 more replies)
0 siblings, 15 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
Commit b5c75b68b7de ("comedi: add HAS_IOPORT dependencies") was reverted
because it made it impossible to select configuration options that
depend on the COMEDI_8254, COMEDI_DAS08, COMEDI_NI_LABPC, or
COMEDI_AMPLC_DIO200 options due to changing 'select' directives to
'depends on' directives and there being no other way to select those
codependent configuration options.
This patch series conditionally removes port I/O support from various
comedi modules so they still be built when a future patch removes the
port I/O functions (inb(), outb() and friends) unless the HAS_IOPORT
configuration option is selected. The final patch 13 adds HAS_IOPORT
dependencies to the configuration options as in the reverted patch, but
there are now fewer options that need to depend on HAS_IOPORT, and the
'select' directives have not been replaced with 'depends on' directives.
01) comedi: Correct dependencies for COMEDI_NI_PCIDIO
02) comedi: comedi_8254: Use a call-back function for register access
03) comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init()
04) comedi: comedi_8254: Conditionally remove I/O port support
05) comedi: 8255_pci: Conditionally remove devices that use port I/O
06) comedi: comedi_8255: Rework subdevice initialization functions
07) comedi: comedi_8255: Conditionally remove I/O port support
08) comedi: ni_labpc_common: Conditionally remove I/O port support
09) comedi: ni_mio_common: Conditionally use I/O port or MMIO
10) comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O
11) comedi: amplc_dio200_common: Refactor register access functions
12) comedi: amplc_dio200_common: Conditionally remove I/O port support
13) comedi: add HAS_IOPORT dependencies again
=============================
v2:
0. Patch titles and numbering is unchanged since v1.
1. Corrects [CONFIG_]HAS_PORTIO to [CONFIG_]HAS_IOPORT in the code for
patches 05 and 08, and in the description for patches 05, 06, 08, 10,
11, and 12.
2. Enhances the commit description for patch 08 a bit.
=============================
drivers/comedi/Kconfig | 45 +++++-
drivers/comedi/drivers.c | 3 +-
drivers/comedi/drivers/8255.c | 2 +-
drivers/comedi/drivers/8255_pci.c | 15 +-
drivers/comedi/drivers/adl_pci9111.c | 8 +-
drivers/comedi/drivers/adl_pci9118.c | 8 +-
drivers/comedi/drivers/adv_pci1710.c | 8 +-
drivers/comedi/drivers/adv_pci_dio.c | 14 +-
drivers/comedi/drivers/aio_aio12_8.c | 10 +-
drivers/comedi/drivers/amplc_dio200_common.c | 104 +++++++++---
drivers/comedi/drivers/amplc_dio200_pci.c | 12 +-
drivers/comedi/drivers/amplc_pc236_common.c | 2 +-
drivers/comedi/drivers/amplc_pci224.c | 8 +-
drivers/comedi/drivers/amplc_pci230.c | 10 +-
drivers/comedi/drivers/cb_das16_cs.c | 8 +-
drivers/comedi/drivers/cb_pcidas.c | 23 +--
drivers/comedi/drivers/cb_pcidas64.c | 7 +-
drivers/comedi/drivers/cb_pcidda.c | 2 +-
drivers/comedi/drivers/cb_pcimdas.c | 12 +-
drivers/comedi/drivers/cb_pcimdda.c | 2 +-
drivers/comedi/drivers/comedi_8254.c | 234 ++++++++++++++++++---------
drivers/comedi/drivers/comedi_8255.c | 123 +++++++-------
drivers/comedi/drivers/daqboard2000.c | 4 +-
drivers/comedi/drivers/das08.c | 11 +-
drivers/comedi/drivers/das16.c | 10 +-
drivers/comedi/drivers/das16m1.c | 22 +--
drivers/comedi/drivers/das1800.c | 8 +-
drivers/comedi/drivers/das6402.c | 8 +-
drivers/comedi/drivers/das800.c | 8 +-
drivers/comedi/drivers/dmm32at.c | 3 +-
drivers/comedi/drivers/me4000.c | 6 +-
drivers/comedi/drivers/ni_at_a2150.c | 8 +-
drivers/comedi/drivers/ni_at_ao.c | 8 +-
drivers/comedi/drivers/ni_atmio16d.c | 2 +-
drivers/comedi/drivers/ni_daq_dio24.c | 2 +-
drivers/comedi/drivers/ni_labpc_common.c | 51 +++---
drivers/comedi/drivers/ni_mio_common.c | 74 ++++++---
drivers/comedi/drivers/pcl711.c | 8 +-
drivers/comedi/drivers/pcl724.c | 6 +-
drivers/comedi/drivers/pcl812.c | 10 +-
drivers/comedi/drivers/pcl816.c | 8 +-
drivers/comedi/drivers/pcl818.c | 8 +-
drivers/comedi/drivers/pcm3724.c | 2 +-
drivers/comedi/drivers/rtd520.c | 6 +-
include/linux/comedi/comedi_8254.h | 51 ++++--
include/linux/comedi/comedi_8255.h | 24 ++-
46 files changed, 649 insertions(+), 359 deletions(-)
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v2 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 02/13] comedi: comedi_8254: Use a call-back function for register access Ian Abbott
` (13 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
The ni_pcidio module does not depend on the comedi_8255 module, so
change the `COMEDI_NI_PCIDIO` configuration option to not select
`COMEDI_8255` and remove the inherited dependency on `HAS_IOPORT`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A
---
drivers/comedi/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 9af280735cba..536101f68e0f 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -1042,7 +1042,6 @@ config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
depends on HAS_DMA
select COMEDI_MITE
- select COMEDI_8255
help
Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
PCI-6533 and PCI-6534
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 02/13] comedi: comedi_8254: Use a call-back function for register access
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 16:40 ` [PATCH v2 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init() Ian Abbott
` (12 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
Rework the comedi_8254 module to use a call-back function for register
access. This will make it easier to isolate the parts that will depend
on the `CONFIG_HAS_IOPORT` macro being defined and also allows the
possibility of supplying an external callback function during
initialization by a variant of the `comedi_8254_init()` and
`comedi_8254_mm_init()` functions, although that has not been
implemented yet.
The `struct comedi_8254` members have been changed to use a pointer to a
callback function and a context of type `unsigned long`. The
`comedi_8254_init()` and `comedi_8254_mm_init()` functions use an
internal callback function and set the context to the base address of
the registers (for `comedi_8254_mm_init()` that involves converting a
`void __iomem *` to `unsigned long`).
A minor change to `dio200_subdev_8254_offset()` in the
amplc_dio200_common module has been made due to the changes in `struct
comedi_8254`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A
---
drivers/comedi/drivers/amplc_dio200_common.c | 4 +-
drivers/comedi/drivers/comedi_8254.c | 177 +++++++++++++------
include/linux/comedi/comedi_8254.h | 22 ++-
3 files changed, 144 insertions(+), 59 deletions(-)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index ff651f2eb86c..2c1507a23f8a 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -149,9 +149,9 @@ static unsigned int dio200_subdev_8254_offset(struct comedi_device *dev,
/* get the offset that was passed to comedi_8254_*_init() */
if (dev->mmio)
- offset = i8254->mmio - dev->mmio;
+ offset = (void __iomem *)i8254->context - dev->mmio;
else
- offset = i8254->iobase - dev->iobase;
+ offset = i8254->context - dev->iobase;
/* remove the shift that was added for PCIe boards */
if (board->is_pcie)
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index b4185c1b2695..3f8657fc7ee5 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -119,63 +119,101 @@
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_8254.h>
-static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg)
+static unsigned int i8254_io8_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
{
- unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift;
- unsigned int val;
+ unsigned long iobase = i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO8) << i8254->regshift;
- switch (i8254->iosize) {
- default:
- case I8254_IO8:
- if (i8254->mmio)
- val = readb(i8254->mmio + reg_offset);
- else
- val = inb(i8254->iobase + reg_offset);
- break;
- case I8254_IO16:
- if (i8254->mmio)
- val = readw(i8254->mmio + reg_offset);
- else
- val = inw(i8254->iobase + reg_offset);
- break;
- case I8254_IO32:
- if (i8254->mmio)
- val = readl(i8254->mmio + reg_offset);
- else
- val = inl(i8254->iobase + reg_offset);
- break;
+ if (dir) {
+ outb(val, iobase + reg_offset);
+ return 0;
+ } else {
+ return inb(iobase + reg_offset);
}
- return val & 0xff;
}
-static void __i8254_write(struct comedi_8254 *i8254,
- unsigned int val, unsigned int reg)
+static unsigned int i8254_io16_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
{
- unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift;
+ unsigned long iobase = i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO16) << i8254->regshift;
- switch (i8254->iosize) {
- default:
- case I8254_IO8:
- if (i8254->mmio)
- writeb(val, i8254->mmio + reg_offset);
- else
- outb(val, i8254->iobase + reg_offset);
- break;
- case I8254_IO16:
- if (i8254->mmio)
- writew(val, i8254->mmio + reg_offset);
- else
- outw(val, i8254->iobase + reg_offset);
- break;
- case I8254_IO32:
- if (i8254->mmio)
- writel(val, i8254->mmio + reg_offset);
- else
- outl(val, i8254->iobase + reg_offset);
- break;
+ if (dir) {
+ outw(val, iobase + reg_offset);
+ return 0;
+ } else {
+ return inw(iobase + reg_offset);
+ }
+}
+
+static unsigned int i8254_io32_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ unsigned long iobase = i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO32) << i8254->regshift;
+
+ if (dir) {
+ outl(val, iobase + reg_offset);
+ return 0;
+ } else {
+ return inl(iobase + reg_offset);
+ }
+}
+
+static unsigned int i8254_mmio8_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ void __iomem *mmiobase = (void __iomem *)i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO8) << i8254->regshift;
+
+ if (dir) {
+ writeb(val, mmiobase + reg_offset);
+ return 0;
+ } else {
+ return readb(mmiobase + reg_offset);
+ }
+}
+
+static unsigned int i8254_mmio16_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ void __iomem *mmiobase = (void __iomem *)i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO16) << i8254->regshift;
+
+ if (dir) {
+ writew(val, mmiobase + reg_offset);
+ return 0;
+ } else {
+ return readw(mmiobase + reg_offset);
}
}
+static unsigned int i8254_mmio32_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ void __iomem *mmiobase = (void __iomem *)i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO32) << i8254->regshift;
+
+ if (dir) {
+ writel(val, mmiobase + reg_offset);
+ return 0;
+ } else {
+ return readl(mmiobase + reg_offset);
+ }
+}
+
+static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg)
+{
+ return 0xff & i8254->iocb(i8254, 0, reg, 0);
+}
+
+static void __i8254_write(struct comedi_8254 *i8254,
+ unsigned int val, unsigned int reg)
+{
+ i8254->iocb(i8254, 1, reg, val);
+}
+
/**
* comedi_8254_status - return the status of a counter
* @i8254: comedi_8254 struct for the timer
@@ -571,8 +609,8 @@ void comedi_8254_subdevice_init(struct comedi_subdevice *s,
}
EXPORT_SYMBOL_GPL(comedi_8254_subdevice_init);
-static struct comedi_8254 *__i8254_init(unsigned long iobase,
- void __iomem *mmio,
+static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
+ unsigned long context,
unsigned int osc_base,
unsigned int iosize,
unsigned int regshift)
@@ -585,12 +623,15 @@ static struct comedi_8254 *__i8254_init(unsigned long iobase,
iosize == I8254_IO32))
return NULL;
+ if (!iocb)
+ return NULL;
+
i8254 = kzalloc(sizeof(*i8254), GFP_KERNEL);
if (!i8254)
return NULL;
- i8254->iobase = iobase;
- i8254->mmio = mmio;
+ i8254->iocb = iocb;
+ i8254->context = context;
i8254->iosize = iosize;
i8254->regshift = regshift;
@@ -617,7 +658,22 @@ struct comedi_8254 *comedi_8254_init(unsigned long iobase,
unsigned int iosize,
unsigned int regshift)
{
- return __i8254_init(iobase, NULL, osc_base, iosize, regshift);
+ comedi_8254_iocb_fn *iocb;
+
+ switch (iosize) {
+ case I8254_IO8:
+ iocb = i8254_io8_cb;
+ break;
+ case I8254_IO16:
+ iocb = i8254_io16_cb;
+ break;
+ case I8254_IO32:
+ iocb = i8254_io32_cb;
+ break;
+ default:
+ return NULL;
+ }
+ return __i8254_init(iocb, iobase, osc_base, iosize, regshift);
}
EXPORT_SYMBOL_GPL(comedi_8254_init);
@@ -634,7 +690,22 @@ struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
unsigned int iosize,
unsigned int regshift)
{
- return __i8254_init(0, mmio, osc_base, iosize, regshift);
+ comedi_8254_iocb_fn *iocb;
+
+ switch (iosize) {
+ case I8254_IO8:
+ iocb = i8254_mmio8_cb;
+ break;
+ case I8254_IO16:
+ iocb = i8254_mmio16_cb;
+ break;
+ case I8254_IO32:
+ iocb = i8254_mmio32_cb;
+ break;
+ default:
+ return NULL;
+ }
+ return __i8254_init(iocb, (unsigned long)mmio, osc_base, iosize, regshift);
}
EXPORT_SYMBOL_GPL(comedi_8254_mm_init);
diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h
index d8264417e53c..18d12321c87d 100644
--- a/include/linux/comedi/comedi_8254.h
+++ b/include/linux/comedi/comedi_8254.h
@@ -57,10 +57,24 @@ struct comedi_subdevice;
/* counter maps zero to 0x10000 */
#define I8254_MAX_COUNT 0x10000
+struct comedi_8254;
+
+/**
+ * typedef comedi_8254_iocb_fn - call-back function type for 8254 register access
+ * @i8254: pointer to struct comedi_8254
+ * @dir: direction (0 = read, 1 = write)
+ * @reg: register number
+ * @val: value to write
+ *
+ * Return: Register value when reading, 0 when writing.
+ */
+typedef unsigned int comedi_8254_iocb_fn(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val);
+
/**
* struct comedi_8254 - private data used by this module
- * @iobase: PIO base address of the registers (in/out)
- * @mmio: MMIO base address of the registers (read/write)
+ * @iocb: I/O call-back function for register access
+ * @context: context for register access (e.g. a base address)
* @iosize: I/O size used to access the registers (b/w/l)
* @regshift: register gap shift
* @osc_base: cascaded oscillator speed in ns
@@ -76,8 +90,8 @@ struct comedi_subdevice;
* @insn_config: driver specific (*insn_config) callback
*/
struct comedi_8254 {
- unsigned long iobase;
- void __iomem *mmio;
+ comedi_8254_iocb_fn *iocb;
+ unsigned long context;
unsigned int iosize;
unsigned int regshift;
unsigned int osc_base;
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init()
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 16:40 ` [PATCH v2 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
2023-09-13 16:40 ` [PATCH v2 02/13] comedi: comedi_8254: Use a call-back function for register access Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
` (11 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
`comedi_8254_init()` and `comedi_8254_mm_init()` return `NULL` on
failure, but the failure is not necessarily due to lack of memory.
Change them to return an `ERR_PTR` value on failure and rename the
functions to make it obvious the API has changed. `comedi_8254_init()`
has been replaced with `comedi_8254_io_alloc()`, and
`comedi_8254_mm_init()` has been replaced with `comedi_8254_mm_alloc()`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A
---
drivers/comedi/drivers.c | 3 +-
drivers/comedi/drivers/adl_pci9111.c | 8 +--
drivers/comedi/drivers/adl_pci9118.c | 8 +--
drivers/comedi/drivers/adv_pci1710.c | 8 +--
drivers/comedi/drivers/adv_pci_dio.c | 10 ++--
drivers/comedi/drivers/aio_aio12_8.c | 8 +--
drivers/comedi/drivers/amplc_dio200_common.c | 12 ++---
drivers/comedi/drivers/amplc_pci224.c | 8 +--
drivers/comedi/drivers/amplc_pci230.c | 8 +--
drivers/comedi/drivers/cb_das16_cs.c | 8 +--
drivers/comedi/drivers/cb_pcidas.c | 21 ++++----
drivers/comedi/drivers/cb_pcimdas.c | 10 ++--
drivers/comedi/drivers/comedi_8254.c | 55 +++++++++++---------
drivers/comedi/drivers/das08.c | 9 ++--
drivers/comedi/drivers/das16.c | 8 +--
drivers/comedi/drivers/das16m1.c | 20 +++----
drivers/comedi/drivers/das1800.c | 8 +--
drivers/comedi/drivers/das6402.c | 8 +--
drivers/comedi/drivers/das800.c | 8 +--
drivers/comedi/drivers/me4000.c | 6 +--
drivers/comedi/drivers/ni_at_a2150.c | 8 +--
drivers/comedi/drivers/ni_at_ao.c | 8 +--
drivers/comedi/drivers/ni_labpc_common.c | 38 +++++++-------
drivers/comedi/drivers/pcl711.c | 8 +--
drivers/comedi/drivers/pcl812.c | 10 ++--
drivers/comedi/drivers/pcl816.c | 8 +--
drivers/comedi/drivers/pcl818.c | 8 +--
drivers/comedi/drivers/rtd520.c | 6 +--
include/linux/comedi/comedi_8254.h | 16 +++---
29 files changed, 179 insertions(+), 165 deletions(-)
diff --git a/drivers/comedi/drivers.c b/drivers/comedi/drivers.c
index d4e2ed709bfc..376130bfba8a 100644
--- a/drivers/comedi/drivers.c
+++ b/drivers/comedi/drivers.c
@@ -177,7 +177,8 @@ static void comedi_device_detach_cleanup(struct comedi_device *dev)
dev->n_subdevices = 0;
}
kfree(dev->private);
- kfree(dev->pacer);
+ if (!IS_ERR(dev->pacer))
+ kfree(dev->pacer);
dev->private = NULL;
dev->pacer = NULL;
dev->driver = NULL;
diff --git a/drivers/comedi/drivers/adl_pci9111.c b/drivers/comedi/drivers/adl_pci9111.c
index c50f94272a74..086d93f40cb9 100644
--- a/drivers/comedi/drivers/adl_pci9111.c
+++ b/drivers/comedi/drivers/adl_pci9111.c
@@ -647,10 +647,10 @@ static int pci9111_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq;
}
- dev->pacer = comedi_8254_init(dev->iobase + PCI9111_8254_BASE_REG,
- I8254_OSC_BASE_2MHZ, I8254_IO16, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9111_8254_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO16, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
index 9a816c718303..a76e2666d583 100644
--- a/drivers/comedi/drivers/adl_pci9118.c
+++ b/drivers/comedi/drivers/adl_pci9118.c
@@ -1524,10 +1524,10 @@ static int pci9118_common_attach(struct comedi_device *dev,
devpriv->iobase_a = pci_resource_start(pcidev, 0);
dev->iobase = pci_resource_start(pcidev, 2);
- dev->pacer = comedi_8254_init(dev->iobase + PCI9118_TIMER_BASE,
- I8254_OSC_BASE_4MHZ, I8254_IO32, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9118_TIMER_BASE,
+ I8254_OSC_BASE_4MHZ, I8254_IO32, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
pci9118_reset(dev);
diff --git a/drivers/comedi/drivers/adv_pci1710.c b/drivers/comedi/drivers/adv_pci1710.c
index 4f2639968260..c49b0f1f5228 100644
--- a/drivers/comedi/drivers/adv_pci1710.c
+++ b/drivers/comedi/drivers/adv_pci1710.c
@@ -767,10 +767,10 @@ static int pci1710_auto_attach(struct comedi_device *dev,
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
- dev->pacer = comedi_8254_init(dev->iobase + PCI171X_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI171X_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
n_subdevices = 1; /* all boards have analog inputs */
if (board->has_ao)
diff --git a/drivers/comedi/drivers/adv_pci_dio.c b/drivers/comedi/drivers/adv_pci_dio.c
index efa3e46b554b..0319d8c7ee47 100644
--- a/drivers/comedi/drivers/adv_pci_dio.c
+++ b/drivers/comedi/drivers/adv_pci_dio.c
@@ -664,11 +664,11 @@ static int pci_dio_auto_attach(struct comedi_device *dev,
if (board->timer_regbase) {
s = &dev->subdevices[subdev++];
- dev->pacer = comedi_8254_init(dev->iobase +
- board->timer_regbase,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + board->timer_regbase,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
comedi_8254_subdevice_init(s, dev->pacer);
}
diff --git a/drivers/comedi/drivers/aio_aio12_8.c b/drivers/comedi/drivers/aio_aio12_8.c
index 30b8a32204d8..f9d40fa3d3a9 100644
--- a/drivers/comedi/drivers/aio_aio12_8.c
+++ b/drivers/comedi/drivers/aio_aio12_8.c
@@ -206,10 +206,10 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
if (ret)
return ret;
- dev->pacer = comedi_8254_init(dev->iobase + AIO12_8_8254_BASE_REG,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + AIO12_8_8254_BASE_REG,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index 2c1507a23f8a..19166cb26f5e 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -556,14 +556,14 @@ static int dio200_subdev_8254_init(struct comedi_device *dev,
}
if (dev->mmio) {
- i8254 = comedi_8254_mm_init(dev->mmio + offset,
- 0, I8254_IO8, regshift);
+ i8254 = comedi_8254_mm_alloc(dev->mmio + offset,
+ 0, I8254_IO8, regshift);
} else {
- i8254 = comedi_8254_init(dev->iobase + offset,
- 0, I8254_IO8, regshift);
+ i8254 = comedi_8254_io_alloc(dev->iobase + offset,
+ 0, I8254_IO8, regshift);
}
- if (!i8254)
- return -ENOMEM;
+ if (IS_ERR(i8254))
+ return PTR_ERR(i8254);
comedi_8254_subdevice_init(s, i8254);
diff --git a/drivers/comedi/drivers/amplc_pci224.c b/drivers/comedi/drivers/amplc_pci224.c
index 5a04e55daeea..1373637c2ca2 100644
--- a/drivers/comedi/drivers/amplc_pci224.c
+++ b/drivers/comedi/drivers/amplc_pci224.c
@@ -1051,10 +1051,10 @@ pci224_auto_attach(struct comedi_device *dev, unsigned long context_model)
outw(devpriv->daccon | PCI224_DACCON_FIFORESET,
dev->iobase + PCI224_DACCON);
- dev->pacer = comedi_8254_init(devpriv->iobase1 + PCI224_Z2_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(devpriv->iobase1 + PCI224_Z2_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
diff --git a/drivers/comedi/drivers/amplc_pci230.c b/drivers/comedi/drivers/amplc_pci230.c
index 92ba8b8c0172..783da73877b9 100644
--- a/drivers/comedi/drivers/amplc_pci230.c
+++ b/drivers/comedi/drivers/amplc_pci230.c
@@ -2475,10 +2475,10 @@ static int pci230_auto_attach(struct comedi_device *dev,
dev->irq = pci_dev->irq;
}
- dev->pacer = comedi_8254_init(dev->iobase + PCI230_Z2_CT_BASE,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI230_Z2_CT_BASE,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
rc = comedi_alloc_subdevices(dev, 3);
if (rc)
diff --git a/drivers/comedi/drivers/cb_das16_cs.c b/drivers/comedi/drivers/cb_das16_cs.c
index 8e0d2fa5f95d..306208a0695b 100644
--- a/drivers/comedi/drivers/cb_das16_cs.c
+++ b/drivers/comedi/drivers/cb_das16_cs.c
@@ -363,10 +363,10 @@ static int das16cs_auto_attach(struct comedi_device *dev,
if (!devpriv)
return -ENOMEM;
- dev->pacer = comedi_8254_init(dev->iobase + DAS16CS_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16CS_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/cb_pcidas.c b/drivers/comedi/drivers/cb_pcidas.c
index 0c7576b967fc..7a6cd681e932 100644
--- a/drivers/comedi/drivers/cb_pcidas.c
+++ b/drivers/comedi/drivers/cb_pcidas.c
@@ -1288,16 +1288,16 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev,
}
dev->irq = pcidev->irq;
- dev->pacer = comedi_8254_init(dev->iobase + PCIDAS_AI_8254_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCIDAS_AI_8254_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
- devpriv->ao_pacer = comedi_8254_init(dev->iobase + PCIDAS_AO_8254_BASE,
- I8254_OSC_BASE_10MHZ,
- I8254_IO8, 0);
- if (!devpriv->ao_pacer)
- return -ENOMEM;
+ devpriv->ao_pacer =
+ comedi_8254_io_alloc(dev->iobase + PCIDAS_AO_8254_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(devpriv->ao_pacer))
+ return PTR_ERR(devpriv->ao_pacer);
ret = comedi_alloc_subdevices(dev, 7);
if (ret)
@@ -1453,7 +1453,8 @@ static void cb_pcidas_detach(struct comedi_device *dev)
if (devpriv->amcc)
outl(INTCSR_INBOX_INTR_STATUS,
devpriv->amcc + AMCC_OP_REG_INTCSR);
- kfree(devpriv->ao_pacer);
+ if (!IS_ERR(devpriv->ao_pacer))
+ kfree(devpriv->ao_pacer);
}
comedi_pci_detach(dev);
}
diff --git a/drivers/comedi/drivers/cb_pcimdas.c b/drivers/comedi/drivers/cb_pcimdas.c
index 8bdb00774f11..5816ef65ed5f 100644
--- a/drivers/comedi/drivers/cb_pcimdas.c
+++ b/drivers/comedi/drivers/cb_pcimdas.c
@@ -364,11 +364,11 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev,
devpriv->BADR3 = pci_resource_start(pcidev, 3);
dev->iobase = pci_resource_start(pcidev, 4);
- dev->pacer = comedi_8254_init(devpriv->BADR3 + PCIMDAS_8254_BASE,
- cb_pcimdas_pacer_clk(dev),
- I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(devpriv->BADR3 + PCIMDAS_8254_BASE,
+ cb_pcimdas_pacer_clk(dev),
+ I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 6);
if (ret)
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index 3f8657fc7ee5..696596944506 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -24,14 +24,17 @@
*
* This module provides the following basic functions:
*
- * comedi_8254_init() / comedi_8254_mm_init()
+ * comedi_8254_io_alloc() / comedi_8254_mm_alloc()
* Initializes this module to access the 8254 registers. The _mm version
- * sets up the module for MMIO register access the other for PIO access.
- * The pointer returned from these functions is normally stored in the
- * comedi_device dev->pacer and will be freed by the comedi core during
- * the driver (*detach). If a driver has multiple 8254 devices, they need
- * to be stored in the drivers private data and freed when the driver is
- * detached.
+ * sets up the module for MMIO register access; the _io version sets it
+ * up for PIO access. These functions return a pointer to a struct
+ * comedi_8254 on success, or an ERR_PTR value on failure. The pointer
+ * returned from these functions is normally stored in the comedi_device
+ * dev->pacer and will be freed by the comedi core during the driver
+ * (*detach). If a driver has multiple 8254 devices, they need to be
+ * stored in the drivers private data and freed when the driver is
+ * detached. If the ERR_PTR value is stored, code should check the
+ * pointer value with !IS_ERR(pointer) before freeing.
*
* NOTE: The counters are reset by setting them to I8254_MODE0 as part of
* this initialization.
@@ -621,14 +624,14 @@ static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
/* sanity check that the iosize is valid */
if (!(iosize == I8254_IO8 || iosize == I8254_IO16 ||
iosize == I8254_IO32))
- return NULL;
+ return ERR_PTR(-EINVAL);
if (!iocb)
- return NULL;
+ return ERR_PTR(-EINVAL);
i8254 = kzalloc(sizeof(*i8254), GFP_KERNEL);
if (!i8254)
- return NULL;
+ return ERR_PTR(-ENOMEM);
i8254->iocb = iocb;
i8254->context = context;
@@ -646,17 +649,19 @@ static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
}
/**
- * comedi_8254_init - allocate and initialize the 8254 device for pio access
+ * comedi_8254_io_alloc - allocate and initialize the 8254 device for pio access
* @iobase: port I/O base address
* @osc_base: base time of the counter in ns
* OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
* @iosize: I/O register size
* @regshift: register gap shift
+ *
+ * Return: A pointer to a struct comedi_8254 or an ERR_PTR value.
*/
-struct comedi_8254 *comedi_8254_init(unsigned long iobase,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift)
+struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
{
comedi_8254_iocb_fn *iocb;
@@ -671,24 +676,26 @@ struct comedi_8254 *comedi_8254_init(unsigned long iobase,
iocb = i8254_io32_cb;
break;
default:
- return NULL;
+ return ERR_PTR(-EINVAL);
}
return __i8254_init(iocb, iobase, osc_base, iosize, regshift);
}
-EXPORT_SYMBOL_GPL(comedi_8254_init);
+EXPORT_SYMBOL_GPL(comedi_8254_io_alloc);
/**
- * comedi_8254_mm_init - allocate and initialize the 8254 device for mmio access
+ * comedi_8254_mm_alloc - allocate and initialize the 8254 device for mmio access
* @mmio: memory mapped I/O base address
* @osc_base: base time of the counter in ns
* OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
* @iosize: I/O register size
* @regshift: register gap shift
+ *
+ * Return: A pointer to a struct comedi_8254 or an ERR_PTR value.
*/
-struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift)
+struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
{
comedi_8254_iocb_fn *iocb;
@@ -703,11 +710,11 @@ struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
iocb = i8254_mmio32_cb;
break;
default:
- return NULL;
+ return ERR_PTR(-EINVAL);
}
return __i8254_init(iocb, (unsigned long)mmio, osc_base, iosize, regshift);
}
-EXPORT_SYMBOL_GPL(comedi_8254_mm_init);
+EXPORT_SYMBOL_GPL(comedi_8254_mm_alloc);
static int __init comedi_8254_module_init(void)
{
diff --git a/drivers/comedi/drivers/das08.c b/drivers/comedi/drivers/das08.c
index f8ab3af2e391..6a3b5411aa90 100644
--- a/drivers/comedi/drivers/das08.c
+++ b/drivers/comedi/drivers/das08.c
@@ -439,10 +439,11 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
/* Counter subdevice (8254) */
s = &dev->subdevices[5];
if (board->i8254_offset) {
- dev->pacer = comedi_8254_init(dev->iobase + board->i8254_offset,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + board->i8254_offset,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
comedi_8254_subdevice_init(s, dev->pacer);
} else {
diff --git a/drivers/comedi/drivers/das16.c b/drivers/comedi/drivers/das16.c
index 728dc02156c8..bfe8811be1b5 100644
--- a/drivers/comedi/drivers/das16.c
+++ b/drivers/comedi/drivers/das16.c
@@ -1067,10 +1067,10 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
osc_base = I8254_OSC_BASE_1MHZ / it->options[3];
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS16_TIMER_BASE_REG,
- osc_base, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16_TIMER_BASE_REG,
+ osc_base, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
das16_alloc_dma(dev, it->options[2]);
diff --git a/drivers/comedi/drivers/das16m1.c b/drivers/comedi/drivers/das16m1.c
index 275effb77746..ff9c5a8897bd 100644
--- a/drivers/comedi/drivers/das16m1.c
+++ b/drivers/comedi/drivers/das16m1.c
@@ -529,15 +529,16 @@ static int das16m1_attach(struct comedi_device *dev,
dev->irq = it->options[1];
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS16M1_8254_IOBASE2,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16M1_8254_IOBASE2,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
- devpriv->counter = comedi_8254_init(dev->iobase + DAS16M1_8254_IOBASE1,
- 0, I8254_IO8, 0);
- if (!devpriv->counter)
- return -ENOMEM;
+ devpriv->counter =
+ comedi_8254_io_alloc(dev->iobase + DAS16M1_8254_IOBASE1,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(devpriv->counter))
+ return PTR_ERR(devpriv->counter);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
@@ -603,7 +604,8 @@ static void das16m1_detach(struct comedi_device *dev)
if (devpriv) {
if (devpriv->extra_iobase)
release_region(devpriv->extra_iobase, DAS16M1_SIZE2);
- kfree(devpriv->counter);
+ if (!IS_ERR(devpriv->counter))
+ kfree(devpriv->counter);
}
comedi_legacy_detach(dev);
}
diff --git a/drivers/comedi/drivers/das1800.c b/drivers/comedi/drivers/das1800.c
index f09608c0f4ff..7117c67aee7e 100644
--- a/drivers/comedi/drivers/das1800.c
+++ b/drivers/comedi/drivers/das1800.c
@@ -1233,10 +1233,10 @@ static int das1800_attach(struct comedi_device *dev,
if (!devpriv->fifo_buf)
return -ENOMEM;
- dev->pacer = comedi_8254_init(dev->iobase + DAS1800_COUNTER,
- I8254_OSC_BASE_5MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS1800_COUNTER,
+ I8254_OSC_BASE_5MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/das6402.c b/drivers/comedi/drivers/das6402.c
index 1af394591e74..68f95330de45 100644
--- a/drivers/comedi/drivers/das6402.c
+++ b/drivers/comedi/drivers/das6402.c
@@ -590,10 +590,10 @@ static int das6402_attach(struct comedi_device *dev,
}
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS6402_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS6402_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/das800.c b/drivers/comedi/drivers/das800.c
index 4ca33f46eaa7..300775523031 100644
--- a/drivers/comedi/drivers/das800.c
+++ b/drivers/comedi/drivers/das800.c
@@ -672,10 +672,10 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->irq = irq;
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS800_8254,
- I8254_OSC_BASE_1MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS800_8254,
+ I8254_OSC_BASE_1MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
diff --git a/drivers/comedi/drivers/me4000.c b/drivers/comedi/drivers/me4000.c
index 9aea02b86ed9..7dd3a0071863 100644
--- a/drivers/comedi/drivers/me4000.c
+++ b/drivers/comedi/drivers/me4000.c
@@ -1209,9 +1209,9 @@ static int me4000_auto_attach(struct comedi_device *dev,
if (!timer_base)
return -ENODEV;
- dev->pacer = comedi_8254_init(timer_base, 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(timer_base, 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
comedi_8254_subdevice_init(s, dev->pacer);
} else {
diff --git a/drivers/comedi/drivers/ni_at_a2150.c b/drivers/comedi/drivers/ni_at_a2150.c
index df8d219e6723..e4e5a0ebd195 100644
--- a/drivers/comedi/drivers/ni_at_a2150.c
+++ b/drivers/comedi/drivers/ni_at_a2150.c
@@ -707,10 +707,10 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* an IRQ and DMA are required to support async commands */
a2150_alloc_irq_and_dma(dev, it);
- dev->pacer = comedi_8254_init(dev->iobase + I8253_BASE_REG,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + I8253_BASE_REG,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
diff --git a/drivers/comedi/drivers/ni_at_ao.c b/drivers/comedi/drivers/ni_at_ao.c
index 9f3147b72aa8..9cf6b4ff6b65 100644
--- a/drivers/comedi/drivers/ni_at_ao.c
+++ b/drivers/comedi/drivers/ni_at_ao.c
@@ -303,10 +303,10 @@ static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!devpriv)
return -ENOMEM;
- dev->pacer = comedi_8254_init(dev->iobase + ATAO_82C53_BASE,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + ATAO_82C53_BASE,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index 763249653228..eb8f6431276a 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -1222,24 +1222,24 @@ int labpc_common_attach(struct comedi_device *dev,
}
if (dev->mmio) {
- dev->pacer = comedi_8254_mm_init(dev->mmio + COUNTER_B_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
- devpriv->counter = comedi_8254_mm_init(dev->mmio +
- COUNTER_A_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
+ dev->pacer =
+ comedi_8254_mm_alloc(dev->mmio + COUNTER_B_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ devpriv->counter =
+ comedi_8254_mm_alloc(dev->mmio + COUNTER_A_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
} else {
- dev->pacer = comedi_8254_init(dev->iobase + COUNTER_B_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
- devpriv->counter = comedi_8254_init(dev->iobase +
- COUNTER_A_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + COUNTER_B_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ devpriv->counter =
+ comedi_8254_io_alloc(dev->iobase + COUNTER_A_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
}
- if (!dev->pacer || !devpriv->counter)
- return -ENOMEM;
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
+ if (IS_ERR(devpriv->counter))
+ return PTR_ERR(devpriv->counter);
ret = comedi_alloc_subdevices(dev, 5);
if (ret)
@@ -1341,8 +1341,10 @@ void labpc_common_detach(struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
- if (devpriv)
- kfree(devpriv->counter);
+ if (devpriv) {
+ if (!IS_ERR(devpriv->counter))
+ kfree(devpriv->counter);
+ }
}
EXPORT_SYMBOL_GPL(labpc_common_detach);
diff --git a/drivers/comedi/drivers/pcl711.c b/drivers/comedi/drivers/pcl711.c
index 05172c553c8a..0cf3917defe7 100644
--- a/drivers/comedi/drivers/pcl711.c
+++ b/drivers/comedi/drivers/pcl711.c
@@ -429,10 +429,10 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->irq = it->options[1];
}
- dev->pacer = comedi_8254_init(dev->iobase + PCL711_TIMER_BASE,
- I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL711_TIMER_BASE,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/pcl812.c b/drivers/comedi/drivers/pcl812.c
index 70dbc129fcf5..0df639c6a595 100644
--- a/drivers/comedi/drivers/pcl812.c
+++ b/drivers/comedi/drivers/pcl812.c
@@ -1143,11 +1143,11 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return ret;
if (board->irq_bits) {
- dev->pacer = comedi_8254_init(dev->iobase + PCL812_TIMER_BASE,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + PCL812_TIMER_BASE,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
if ((1 << it->options[1]) & board->irq_bits) {
ret = request_irq(it->options[1], pcl812_interrupt, 0,
diff --git a/drivers/comedi/drivers/pcl816.c b/drivers/comedi/drivers/pcl816.c
index a5e5320be648..28d1a88c50f6 100644
--- a/drivers/comedi/drivers/pcl816.c
+++ b/drivers/comedi/drivers/pcl816.c
@@ -615,10 +615,10 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* an IRQ and DMA are required to support async commands */
pcl816_alloc_irq_and_dma(dev, it);
- dev->pacer = comedi_8254_init(dev->iobase + PCL816_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL816_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/pcl818.c b/drivers/comedi/drivers/pcl818.c
index 29e503de8267..4127adcfb229 100644
--- a/drivers/comedi/drivers/pcl818.c
+++ b/drivers/comedi/drivers/pcl818.c
@@ -1015,10 +1015,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
else
osc_base = I8254_OSC_BASE_1MHZ;
- dev->pacer = comedi_8254_init(dev->iobase + PCL818_TIMER_BASE,
- osc_base, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL818_TIMER_BASE,
+ osc_base, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
/* max sampling speed */
devpriv->ns_min = board->ns_min;
diff --git a/drivers/comedi/drivers/rtd520.c b/drivers/comedi/drivers/rtd520.c
index 7e0ec1a2a2ca..44bb0decd7a4 100644
--- a/drivers/comedi/drivers/rtd520.c
+++ b/drivers/comedi/drivers/rtd520.c
@@ -1289,9 +1289,9 @@ static int rtd_auto_attach(struct comedi_device *dev,
/* 8254 Timer/Counter subdevice */
s = &dev->subdevices[3];
- dev->pacer = comedi_8254_mm_init(dev->mmio + LAS0_8254_TIMER_BASE,
- RTD_CLOCK_BASE, I8254_IO8, 2);
- if (!dev->pacer)
+ dev->pacer = comedi_8254_mm_alloc(dev->mmio + LAS0_8254_TIMER_BASE,
+ RTD_CLOCK_BASE, I8254_IO8, 2);
+ if (IS_ERR(dev->pacer))
return -ENOMEM;
comedi_8254_subdevice_init(s, dev->pacer);
diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h
index 18d12321c87d..393ccb301028 100644
--- a/include/linux/comedi/comedi_8254.h
+++ b/include/linux/comedi/comedi_8254.h
@@ -136,13 +136,13 @@ void comedi_8254_set_busy(struct comedi_8254 *i8254,
void comedi_8254_subdevice_init(struct comedi_subdevice *s,
struct comedi_8254 *i8254);
-struct comedi_8254 *comedi_8254_init(unsigned long iobase,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift);
-struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift);
+struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift);
+struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift);
#endif /* _COMEDI_8254_H */
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 04/13] comedi: comedi_8254: Conditionally remove I/O port support
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (2 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init() Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:46 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O Ian Abbott
` (10 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
The comedi_8254 module supports both port I/O and memory-mapped I/O.
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends) will only be declared if the `HAS_IOPORT` configuration option
is enabled.
Conditionally compile the parts of the module that use port I/O so they
are compiled if and only if the `CONFIG_HAS_IOPORT` macro is defined, so
that it can still be built if the port I/O functions have not been
declared. If `CONFIG_HAS_IOPORT` is undefined, replace the GPL-exported
`comedi_8254_io_alloc()` function with a dummy static inline version
that just returns `ERR_PTR(-ENXIO)`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
v2: N/A
---
drivers/comedi/drivers/comedi_8254.c | 8 ++++++++
include/linux/comedi/comedi_8254.h | 13 +++++++++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index 696596944506..6beca2a6d66e 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -122,6 +122,8 @@
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_8254.h>
+#ifdef CONFIG_HAS_IOPORT
+
static unsigned int i8254_io8_cb(struct comedi_8254 *i8254, int dir,
unsigned int reg, unsigned int val)
{
@@ -164,6 +166,8 @@ static unsigned int i8254_io32_cb(struct comedi_8254 *i8254, int dir,
}
}
+#endif /* CONFIG_HAS_IOPORT */
+
static unsigned int i8254_mmio8_cb(struct comedi_8254 *i8254, int dir,
unsigned int reg, unsigned int val)
{
@@ -648,6 +652,8 @@ static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
return i8254;
}
+#ifdef CONFIG_HAS_IOPORT
+
/**
* comedi_8254_io_alloc - allocate and initialize the 8254 device for pio access
* @iobase: port I/O base address
@@ -682,6 +688,8 @@ struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
}
EXPORT_SYMBOL_GPL(comedi_8254_io_alloc);
+#endif /* CONFIG_HAS_IOPORT */
+
/**
* comedi_8254_mm_alloc - allocate and initialize the 8254 device for mmio access
* @mmio: memory mapped I/O base address
diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h
index 393ccb301028..d527f04400df 100644
--- a/include/linux/comedi/comedi_8254.h
+++ b/include/linux/comedi/comedi_8254.h
@@ -12,6 +12,8 @@
#define _COMEDI_8254_H
#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
struct comedi_device;
struct comedi_insn;
@@ -136,10 +138,21 @@ void comedi_8254_set_busy(struct comedi_8254 *i8254,
void comedi_8254_subdevice_init(struct comedi_subdevice *s,
struct comedi_8254 *i8254);
+#ifdef CONFIG_HAS_IOPORT
struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
unsigned int osc_base,
unsigned int iosize,
unsigned int regshift);
+#else
+static inline struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
+{
+ return ERR_PTR(-ENXIO);
+}
+#endif
+
struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio,
unsigned int osc_base,
unsigned int iosize,
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (3 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 06/13] comedi: comedi_8255: Rework subdevice initialization functions Ian Abbott
` (9 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The 8255_pci module supports PCI digital I/O devices from various
manufacturers that consist of one or more 8255 Programmable Peripheral
Interface chips (or equivalent hardware) to provide their digital I/O
ports. Some of the devices use port I/O and some only use memory-mapped
I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined. Change
`pci_8255_auto_attach()` to return an error if the device actually
requires port I/O (based on the PCI BAR resource flags) but the
`HAS_IOPORT` configuration is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT`.
---
drivers/comedi/drivers/8255_pci.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/drivers/8255_pci.c b/drivers/comedi/drivers/8255_pci.c
index 0fec048e3a53..9ad52e9f5427 100644
--- a/drivers/comedi/drivers/8255_pci.c
+++ b/drivers/comedi/drivers/8255_pci.c
@@ -57,6 +57,7 @@
#include <linux/comedi/comedi_8255.h>
enum pci_8255_boardid {
+#ifdef CONFIG_HAS_IOPORT
BOARD_ADLINK_PCI7224,
BOARD_ADLINK_PCI7248,
BOARD_ADLINK_PCI7296,
@@ -65,6 +66,7 @@ enum pci_8255_boardid {
BOARD_CB_PCIDIO48H_OLD,
BOARD_CB_PCIDIO48H_NEW,
BOARD_CB_PCIDIO96H,
+#endif /* CONFIG_HAS_IOPORT */
BOARD_NI_PCIDIO96,
BOARD_NI_PCIDIO96B,
BOARD_NI_PXI6508,
@@ -82,6 +84,7 @@ struct pci_8255_boardinfo {
};
static const struct pci_8255_boardinfo pci_8255_boards[] = {
+#ifdef CONFIG_HAS_IOPORT
[BOARD_ADLINK_PCI7224] = {
.name = "adl_pci-7224",
.dio_badr = 2,
@@ -122,6 +125,7 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = {
.dio_badr = 2,
.n_8255 = 4,
},
+#endif /* CONFIG_HAS_IOPORT */
[BOARD_NI_PCIDIO96] = {
.name = "ni_pci-dio-96",
.dio_badr = 1,
@@ -219,8 +223,11 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
dev->mmio = pci_ioremap_bar(pcidev, board->dio_badr);
if (!dev->mmio)
return -ENOMEM;
- } else {
+ } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) {
dev->iobase = pci_resource_start(pcidev, board->dio_badr);
+ } else {
+ dev_err(dev->class_dev, "error! need I/O port support\n");
+ return -ENXIO;
}
/*
@@ -259,6 +266,7 @@ static int pci_8255_pci_probe(struct pci_dev *dev,
}
static const struct pci_device_id pci_8255_pci_table[] = {
+#ifdef CONFIG_HAS_IOPORT
{ PCI_VDEVICE(ADLINK, 0x7224), BOARD_ADLINK_PCI7224 },
{ PCI_VDEVICE(ADLINK, 0x7248), BOARD_ADLINK_PCI7248 },
{ PCI_VDEVICE(ADLINK, 0x7296), BOARD_ADLINK_PCI7296 },
@@ -269,6 +277,7 @@ static const struct pci_device_id pci_8255_pci_table[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CB, 0x000b, PCI_VENDOR_ID_CB, 0x000b),
.driver_data = BOARD_CB_PCIDIO48H_NEW },
{ PCI_VDEVICE(CB, 0x0017), BOARD_CB_PCIDIO96H },
+#endif /* CONFIG_HAS_IOPORT */
{ PCI_VDEVICE(NI, 0x0160), BOARD_NI_PCIDIO96 },
{ PCI_VDEVICE(NI, 0x1630), BOARD_NI_PCIDIO96B },
{ PCI_VDEVICE(NI, 0x13c0), BOARD_NI_PXI6508 },
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 06/13] comedi: comedi_8255: Rework subdevice initialization functions
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (4 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 07/13] comedi: comedi_8255: Conditionally remove I/O port support Ian Abbott
` (8 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
Comedi drivers can initialize an 8255 subdevice in I/O space by calling
`subdev_8255_init()`, or in memory-mapped I/O space by calling
`subdev_8255_mm_init()`, or by supplying a call-back function pointer
and context to either of those functions. Change it so that a new
function `subdev_8255_cb_init()` shall be called instead when supplying
a callback function and context, and remove the call-back function
parameter from `subdev_8255_init()` and `subdev_8255_mm_init()`.
Also rename `subdev_8255_init()` to `subdev_8255_io_init()`. The
parameters are changing, so might as well rename it at the same time.
Also rename the `regbase` member of `struct subdev_8255_private` to
`context` since this holds the context for the call-back function call.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
v2: N/A
---
drivers/comedi/drivers/8255.c | 2 +-
drivers/comedi/drivers/8255_pci.c | 4 +-
drivers/comedi/drivers/adv_pci_dio.c | 4 +-
drivers/comedi/drivers/aio_aio12_8.c | 2 +-
drivers/comedi/drivers/amplc_pc236_common.c | 2 +-
drivers/comedi/drivers/amplc_pci230.c | 2 +-
drivers/comedi/drivers/cb_pcidas.c | 2 +-
drivers/comedi/drivers/cb_pcidas64.c | 7 +-
drivers/comedi/drivers/cb_pcidda.c | 2 +-
drivers/comedi/drivers/cb_pcimdas.c | 2 +-
drivers/comedi/drivers/cb_pcimdda.c | 2 +-
drivers/comedi/drivers/comedi_8255.c | 115 +++++++++-----------
drivers/comedi/drivers/daqboard2000.c | 4 +-
drivers/comedi/drivers/das08.c | 2 +-
drivers/comedi/drivers/das16.c | 2 +-
drivers/comedi/drivers/das16m1.c | 2 +-
drivers/comedi/drivers/dmm32at.c | 3 +-
drivers/comedi/drivers/ni_atmio16d.c | 2 +-
drivers/comedi/drivers/ni_daq_dio24.c | 2 +-
drivers/comedi/drivers/ni_labpc_common.c | 4 +-
drivers/comedi/drivers/ni_mio_common.c | 4 +-
drivers/comedi/drivers/pcl724.c | 6 +-
drivers/comedi/drivers/pcm3724.c | 2 +-
include/linux/comedi/comedi_8255.h | 13 ++-
24 files changed, 92 insertions(+), 100 deletions(-)
diff --git a/drivers/comedi/drivers/8255.c b/drivers/comedi/drivers/8255.c
index ced8ea09d4fa..f45f7bd1c61a 100644
--- a/drivers/comedi/drivers/8255.c
+++ b/drivers/comedi/drivers/8255.c
@@ -80,7 +80,7 @@ static int dev_8255_attach(struct comedi_device *dev,
if (ret) {
s->type = COMEDI_SUBD_UNUSED;
} else {
- ret = subdev_8255_init(dev, s, NULL, iobase);
+ ret = subdev_8255_io_init(dev, s, iobase);
if (ret) {
/*
* Release the I/O port region here, as the
diff --git a/drivers/comedi/drivers/8255_pci.c b/drivers/comedi/drivers/8255_pci.c
index 9ad52e9f5427..8498cabe4d91 100644
--- a/drivers/comedi/drivers/8255_pci.c
+++ b/drivers/comedi/drivers/8255_pci.c
@@ -242,9 +242,9 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
for (i = 0; i < board->n_8255; i++) {
s = &dev->subdevices[i];
if (dev->mmio)
- ret = subdev_8255_mm_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_mm_init(dev, s, i * I8255_SIZE);
else
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/adv_pci_dio.c b/drivers/comedi/drivers/adv_pci_dio.c
index 0319d8c7ee47..ca8054504760 100644
--- a/drivers/comedi/drivers/adv_pci_dio.c
+++ b/drivers/comedi/drivers/adv_pci_dio.c
@@ -642,8 +642,8 @@ static int pci_dio_auto_attach(struct comedi_device *dev,
for (j = 0; j < d->chans; j++) {
s = &dev->subdevices[subdev++];
- ret = subdev_8255_init(dev, s, NULL,
- d->addr + j * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s,
+ d->addr + j * I8255_SIZE);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/aio_aio12_8.c b/drivers/comedi/drivers/aio_aio12_8.c
index f9d40fa3d3a9..227a86a3a760 100644
--- a/drivers/comedi/drivers/aio_aio12_8.c
+++ b/drivers/comedi/drivers/aio_aio12_8.c
@@ -247,7 +247,7 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
/* Digital I/O subdevice (8255) */
s = &dev->subdevices[2];
- ret = subdev_8255_init(dev, s, NULL, AIO12_8_8255_BASE_REG);
+ ret = subdev_8255_io_init(dev, s, AIO12_8_8255_BASE_REG);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/amplc_pc236_common.c b/drivers/comedi/drivers/amplc_pc236_common.c
index 9f4f89b1ef23..326ca72c24ec 100644
--- a/drivers/comedi/drivers/amplc_pc236_common.c
+++ b/drivers/comedi/drivers/amplc_pc236_common.c
@@ -147,7 +147,7 @@ int amplc_pc236_common_attach(struct comedi_device *dev, unsigned long iobase,
s = &dev->subdevices[0];
/* digital i/o subdevice (8255) */
- ret = subdev_8255_init(dev, s, NULL, 0x00);
+ ret = subdev_8255_io_init(dev, s, 0x00);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/amplc_pci230.c b/drivers/comedi/drivers/amplc_pci230.c
index 783da73877b9..c74209c2e83a 100644
--- a/drivers/comedi/drivers/amplc_pci230.c
+++ b/drivers/comedi/drivers/amplc_pci230.c
@@ -2529,7 +2529,7 @@ static int pci230_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[2];
/* digital i/o subdevice */
if (board->have_dio) {
- rc = subdev_8255_init(dev, s, NULL, PCI230_PPI_X_BASE);
+ rc = subdev_8255_io_init(dev, s, PCI230_PPI_X_BASE);
if (rc)
return rc;
} else {
diff --git a/drivers/comedi/drivers/cb_pcidas.c b/drivers/comedi/drivers/cb_pcidas.c
index 7a6cd681e932..8bb9b0623869 100644
--- a/drivers/comedi/drivers/cb_pcidas.c
+++ b/drivers/comedi/drivers/cb_pcidas.c
@@ -1352,7 +1352,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev,
/* 8255 */
s = &dev->subdevices[2];
- ret = subdev_8255_init(dev, s, NULL, PCIDAS_8255_BASE);
+ ret = subdev_8255_io_init(dev, s, PCIDAS_8255_BASE);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/cb_pcidas64.c b/drivers/comedi/drivers/cb_pcidas64.c
index ca6038a25f26..ff19fc3859e4 100644
--- a/drivers/comedi/drivers/cb_pcidas64.c
+++ b/drivers/comedi/drivers/cb_pcidas64.c
@@ -3877,11 +3877,10 @@ static int setup_subdevices(struct comedi_device *dev)
s = &dev->subdevices[4];
if (board->has_8255) {
if (board->layout == LAYOUT_4020) {
- ret = subdev_8255_init(dev, s, dio_callback_4020,
- I8255_4020_REG);
+ ret = subdev_8255_cb_init(dev, s, dio_callback_4020,
+ I8255_4020_REG);
} else {
- ret = subdev_8255_mm_init(dev, s, NULL,
- DIO_8255_OFFSET);
+ ret = subdev_8255_mm_init(dev, s, DIO_8255_OFFSET);
}
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/cb_pcidda.c b/drivers/comedi/drivers/cb_pcidda.c
index c52204a6bda4..c353d0f87da9 100644
--- a/drivers/comedi/drivers/cb_pcidda.c
+++ b/drivers/comedi/drivers/cb_pcidda.c
@@ -365,7 +365,7 @@ static int cb_pcidda_auto_attach(struct comedi_device *dev,
/* two 8255 digital io subdevices */
for (i = 0; i < 2; i++) {
s = &dev->subdevices[1 + i];
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/cb_pcimdas.c b/drivers/comedi/drivers/cb_pcimdas.c
index 5816ef65ed5f..641c30df392e 100644
--- a/drivers/comedi/drivers/cb_pcimdas.c
+++ b/drivers/comedi/drivers/cb_pcimdas.c
@@ -405,7 +405,7 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev,
/* Digital I/O subdevice */
s = &dev->subdevices[2];
- ret = subdev_8255_init(dev, s, NULL, PCIMDAS_8255_BASE);
+ ret = subdev_8255_io_init(dev, s, PCIMDAS_8255_BASE);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/cb_pcimdda.c b/drivers/comedi/drivers/cb_pcimdda.c
index bf8093a10315..541b5742bb1b 100644
--- a/drivers/comedi/drivers/cb_pcimdda.c
+++ b/drivers/comedi/drivers/cb_pcimdda.c
@@ -154,7 +154,7 @@ static int cb_pcimdda_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[1];
/* digital i/o subdevice */
- return subdev_8255_init(dev, s, NULL, PCIMDDA_8255_BASE_REG);
+ return subdev_8255_io_init(dev, s, PCIMDDA_8255_BASE_REG);
}
static struct comedi_driver cb_pcimdda_driver = {
diff --git a/drivers/comedi/drivers/comedi_8255.c b/drivers/comedi/drivers/comedi_8255.c
index 5562b9cd0a17..28fd9d8c95cc 100644
--- a/drivers/comedi/drivers/comedi_8255.c
+++ b/drivers/comedi/drivers/comedi_8255.c
@@ -33,9 +33,9 @@
#include <linux/comedi/comedi_8255.h>
struct subdev_8255_private {
- unsigned long regbase;
+ unsigned long context;
int (*io)(struct comedi_device *dev, int dir, int port, int data,
- unsigned long regbase);
+ unsigned long context);
};
static int subdev_8255_io(struct comedi_device *dev,
@@ -64,7 +64,7 @@ static int subdev_8255_insn(struct comedi_device *dev,
unsigned int *data)
{
struct subdev_8255_private *spriv = s->private;
- unsigned long regbase = spriv->regbase;
+ unsigned long context = spriv->context;
unsigned int mask;
unsigned int v;
@@ -72,18 +72,18 @@ static int subdev_8255_insn(struct comedi_device *dev,
if (mask) {
if (mask & 0xff)
spriv->io(dev, 1, I8255_DATA_A_REG,
- s->state & 0xff, regbase);
+ s->state & 0xff, context);
if (mask & 0xff00)
spriv->io(dev, 1, I8255_DATA_B_REG,
- (s->state >> 8) & 0xff, regbase);
+ (s->state >> 8) & 0xff, context);
if (mask & 0xff0000)
spriv->io(dev, 1, I8255_DATA_C_REG,
- (s->state >> 16) & 0xff, regbase);
+ (s->state >> 16) & 0xff, context);
}
- v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, regbase);
- v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, regbase) << 8);
- v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, regbase) << 16);
+ v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, context);
+ v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, context) << 8);
+ v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, context) << 16);
data[1] = v;
@@ -94,7 +94,7 @@ static void subdev_8255_do_config(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
- unsigned long regbase = spriv->regbase;
+ unsigned long context = spriv->context;
int config;
config = I8255_CTRL_CW;
@@ -108,7 +108,7 @@ static void subdev_8255_do_config(struct comedi_device *dev,
if (!(s->io_bits & 0xf00000))
config |= I8255_CTRL_C_HI_IO;
- spriv->io(dev, 1, I8255_CTRL_REG, config, regbase);
+ spriv->io(dev, 1, I8255_CTRL_REG, config, context);
}
static int subdev_8255_insn_config(struct comedi_device *dev,
@@ -142,23 +142,19 @@ static int __subdev_8255_init(struct comedi_device *dev,
struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev,
int dir, int port, int data,
- unsigned long regbase),
- unsigned long regbase,
- bool is_mmio)
+ unsigned long context),
+ unsigned long context)
{
struct subdev_8255_private *spriv;
+ if (!io)
+ return -EINVAL;
+
spriv = comedi_alloc_spriv(s, sizeof(*spriv));
if (!spriv)
return -ENOMEM;
- if (io)
- spriv->io = io;
- else if (is_mmio)
- spriv->io = subdev_8255_mmio;
- else
- spriv->io = subdev_8255_io;
- spriv->regbase = regbase;
+ spriv->context = context;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
@@ -174,88 +170,83 @@ static int __subdev_8255_init(struct comedi_device *dev,
}
/**
- * subdev_8255_init - initialize DIO subdevice for driving I/O mapped 8255
+ * subdev_8255_io_init - initialize DIO subdevice for driving I/O mapped 8255
* @dev: comedi device owning subdevice
* @s: comedi subdevice to initialize
- * @io: (optional) register I/O call-back function
- * @regbase: offset of 8255 registers from dev->iobase, or call-back context
+ * @regbase: offset of 8255 registers from dev->iobase
*
* Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
*
- * If the optional I/O call-back function is provided, its prototype is of
- * the following form:
- *
- * int my_8255_callback(struct comedi_device *dev, int dir, int port,
- * int data, unsigned long regbase);
- *
- * where 'dev', and 'regbase' match the values passed to this function,
- * 'port' is the 8255 port number 0 to 3 (including the control port), 'dir'
- * is the direction (0 for read, 1 for write) and 'data' is the value to be
- * written. It should return 0 if writing or the value read if reading.
- *
- * If the optional I/O call-back function is not provided, an internal
- * call-back function is used which uses consecutive I/O port addresses
- * starting at dev->iobase + regbase.
- *
* Return: -ENOMEM if failed to allocate memory, zero on success.
*/
-int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
- int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
+int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned long regbase)
{
- return __subdev_8255_init(dev, s, io, regbase, false);
+ return __subdev_8255_init(dev, s, subdev_8255_io, regbase);
}
-EXPORT_SYMBOL_GPL(subdev_8255_init);
+EXPORT_SYMBOL_GPL(subdev_8255_io_init);
/**
* subdev_8255_mm_init - initialize DIO subdevice for driving mmio-mapped 8255
* @dev: comedi device owning subdevice
* @s: comedi subdevice to initialize
- * @io: (optional) register I/O call-back function
- * @regbase: offset of 8255 registers from dev->mmio, or call-back context
+ * @regbase: offset of 8255 registers from dev->mmio
*
* Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
*
- * If the optional I/O call-back function is provided, its prototype is of
- * the following form:
+ * Return: -ENOMEM if failed to allocate memory, zero on success.
+ */
+int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
+ unsigned long regbase)
+{
+ return __subdev_8255_init(dev, s, subdev_8255_mmio, regbase);
+}
+EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
+
+/**
+ * subdev_8255_cb_init - initialize DIO subdevice for driving callback-mapped 8255
+ * @dev: comedi device owning subdevice
+ * @s: comedi subdevice to initialize
+ * @io: register I/O call-back function
+ * @context: call-back context
+ *
+ * Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
+ *
+ * The prototype of the I/O call-back function is of the following form:
*
* int my_8255_callback(struct comedi_device *dev, int dir, int port,
- * int data, unsigned long regbase);
+ * int data, unsigned long context);
*
- * where 'dev', and 'regbase' match the values passed to this function,
+ * where 'dev', and 'context' match the values passed to this function,
* 'port' is the 8255 port number 0 to 3 (including the control port), 'dir'
* is the direction (0 for read, 1 for write) and 'data' is the value to be
* written. It should return 0 if writing or the value read if reading.
*
- * If the optional I/O call-back function is not provided, an internal
- * call-back function is used which uses consecutive MMIO virtual addresses
- * starting at dev->mmio + regbase.
*
* Return: -ENOMEM if failed to allocate memory, zero on success.
*/
-int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
+int subdev_8255_cb_init(struct comedi_device *dev, struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
- unsigned long regbase)
+ int data, unsigned long context),
+ unsigned long context)
{
- return __subdev_8255_init(dev, s, io, regbase, true);
+ return __subdev_8255_init(dev, s, io, context);
}
-EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
+EXPORT_SYMBOL_GPL(subdev_8255_cb_init);
/**
* subdev_8255_regbase - get offset of 8255 registers or call-back context
* @s: comedi subdevice
*
- * Returns the 'regbase' parameter that was previously passed to
- * subdev_8255_init() or subdev_8255_mm_init() to set up the subdevice.
- * Only valid if the subdevice was set up successfully.
+ * Returns the 'regbase' or 'context' parameter that was previously passed to
+ * subdev_8255_io_init(), subdev_8255_mm_init(), or subdev_8255_cb_init() to
+ * set up the subdevice. Only valid if the subdevice was set up successfully.
*/
unsigned long subdev_8255_regbase(struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
- return spriv->regbase;
+ return spriv->context;
}
EXPORT_SYMBOL_GPL(subdev_8255_regbase);
diff --git a/drivers/comedi/drivers/daqboard2000.c b/drivers/comedi/drivers/daqboard2000.c
index c0a4e1b06fb3..897bf46b95ee 100644
--- a/drivers/comedi/drivers/daqboard2000.c
+++ b/drivers/comedi/drivers/daqboard2000.c
@@ -738,8 +738,8 @@ static int db2k_auto_attach(struct comedi_device *dev, unsigned long context)
return result;
s = &dev->subdevices[2];
- return subdev_8255_init(dev, s, db2k_8255_cb,
- DB2K_REG_DIO_P2_EXP_IO_8_BIT);
+ return subdev_8255_cb_init(dev, s, db2k_8255_cb,
+ DB2K_REG_DIO_P2_EXP_IO_8_BIT);
}
static void db2k_detach(struct comedi_device *dev)
diff --git a/drivers/comedi/drivers/das08.c b/drivers/comedi/drivers/das08.c
index 6a3b5411aa90..5d5b9174f88a 100644
--- a/drivers/comedi/drivers/das08.c
+++ b/drivers/comedi/drivers/das08.c
@@ -429,7 +429,7 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
s = &dev->subdevices[4];
/* 8255 */
if (board->i8255_offset != 0) {
- ret = subdev_8255_init(dev, s, NULL, board->i8255_offset);
+ ret = subdev_8255_io_init(dev, s, board->i8255_offset);
if (ret)
return ret;
} else {
diff --git a/drivers/comedi/drivers/das16.c b/drivers/comedi/drivers/das16.c
index bfe8811be1b5..4ed56a02150e 100644
--- a/drivers/comedi/drivers/das16.c
+++ b/drivers/comedi/drivers/das16.c
@@ -1145,7 +1145,7 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* 8255 Digital I/O subdevice */
if (board->has_8255) {
s = &dev->subdevices[4];
- ret = subdev_8255_init(dev, s, NULL, board->i8255_offset);
+ ret = subdev_8255_io_init(dev, s, board->i8255_offset);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/das16m1.c b/drivers/comedi/drivers/das16m1.c
index ff9c5a8897bd..b8ea737ad3d1 100644
--- a/drivers/comedi/drivers/das16m1.c
+++ b/drivers/comedi/drivers/das16m1.c
@@ -583,7 +583,7 @@ static int das16m1_attach(struct comedi_device *dev,
/* Digital I/O subdevice (8255) */
s = &dev->subdevices[3];
- ret = subdev_8255_init(dev, s, NULL, DAS16M1_8255_IOBASE);
+ ret = subdev_8255_io_init(dev, s, DAS16M1_8255_IOBASE);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/dmm32at.c b/drivers/comedi/drivers/dmm32at.c
index fe023c722aa3..644e3b643c79 100644
--- a/drivers/comedi/drivers/dmm32at.c
+++ b/drivers/comedi/drivers/dmm32at.c
@@ -599,7 +599,8 @@ static int dmm32at_attach(struct comedi_device *dev,
/* Digital I/O subdevice */
s = &dev->subdevices[2];
- return subdev_8255_init(dev, s, dmm32at_8255_io, DMM32AT_8255_IOBASE);
+ return subdev_8255_cb_init(dev, s, dmm32at_8255_io,
+ DMM32AT_8255_IOBASE);
}
static struct comedi_driver dmm32at_driver = {
diff --git a/drivers/comedi/drivers/ni_atmio16d.c b/drivers/comedi/drivers/ni_atmio16d.c
index 9fa902529a8e..e5e7cc423c87 100644
--- a/drivers/comedi/drivers/ni_atmio16d.c
+++ b/drivers/comedi/drivers/ni_atmio16d.c
@@ -677,7 +677,7 @@ static int atmio16d_attach(struct comedi_device *dev,
/* 8255 subdevice */
s = &dev->subdevices[3];
if (board->has_8255) {
- ret = subdev_8255_init(dev, s, NULL, 0x00);
+ ret = subdev_8255_io_init(dev, s, 0x00);
if (ret)
return ret;
} else {
diff --git a/drivers/comedi/drivers/ni_daq_dio24.c b/drivers/comedi/drivers/ni_daq_dio24.c
index 487733111023..9419caf02edc 100644
--- a/drivers/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/comedi/drivers/ni_daq_dio24.c
@@ -45,7 +45,7 @@ static int dio24_auto_attach(struct comedi_device *dev,
/* 8255 dio */
s = &dev->subdevices[0];
- return subdev_8255_init(dev, s, NULL, 0x00);
+ return subdev_8255_io_init(dev, s, 0x00);
}
static struct comedi_driver driver_dio24 = {
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index eb8f6431276a..5d5c1d0e9cb6 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -1287,9 +1287,9 @@ int labpc_common_attach(struct comedi_device *dev,
/* 8255 dio */
s = &dev->subdevices[2];
if (dev->mmio)
- ret = subdev_8255_mm_init(dev, s, NULL, DIO_BASE_REG);
+ ret = subdev_8255_mm_init(dev, s, DIO_BASE_REG);
else
- ret = subdev_8255_init(dev, s, NULL, DIO_BASE_REG);
+ ret = subdev_8255_io_init(dev, s, DIO_BASE_REG);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c
index d39998565808..638be08b43e4 100644
--- a/drivers/comedi/drivers/ni_mio_common.c
+++ b/drivers/comedi/drivers/ni_mio_common.c
@@ -6137,8 +6137,8 @@ static int ni_E_init(struct comedi_device *dev,
/* 8255 device */
s = &dev->subdevices[NI_8255_DIO_SUBDEV];
if (board->has_8255) {
- ret = subdev_8255_init(dev, s, ni_8255_callback,
- NI_E_8255_BASE);
+ ret = subdev_8255_cb_init(dev, s, ni_8255_callback,
+ NI_E_8255_BASE);
if (ret)
return ret;
} else {
diff --git a/drivers/comedi/drivers/pcl724.c b/drivers/comedi/drivers/pcl724.c
index 948a0576c9ef..00474710b81f 100644
--- a/drivers/comedi/drivers/pcl724.c
+++ b/drivers/comedi/drivers/pcl724.c
@@ -124,10 +124,10 @@ static int pcl724_attach(struct comedi_device *dev,
s = &dev->subdevices[i];
if (board->is_pet48) {
iobase = dev->iobase + (i * 0x1000);
- ret = subdev_8255_init(dev, s, pcl724_8255mapped_io,
- iobase);
+ ret = subdev_8255_cb_init(dev, s, pcl724_8255mapped_io,
+ iobase);
} else {
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
}
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/pcm3724.c b/drivers/comedi/drivers/pcm3724.c
index ca8bef54dacc..fb41de3baef8 100644
--- a/drivers/comedi/drivers/pcm3724.c
+++ b/drivers/comedi/drivers/pcm3724.c
@@ -204,7 +204,7 @@ static int pcm3724_attach(struct comedi_device *dev,
for (i = 0; i < dev->n_subdevices; i++) {
s = &dev->subdevices[i];
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
if (ret)
return ret;
s->insn_config = subdev_3724_insn_config;
diff --git a/include/linux/comedi/comedi_8255.h b/include/linux/comedi/comedi_8255.h
index b2a5bc6b3a49..b396fcfbf8b0 100644
--- a/include/linux/comedi/comedi_8255.h
+++ b/include/linux/comedi/comedi_8255.h
@@ -27,16 +27,17 @@
struct comedi_device;
struct comedi_subdevice;
-int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
- int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
- unsigned long regbase);
+int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
+ unsigned long regbase);
int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
- int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
unsigned long regbase);
+int subdev_8255_cb_init(struct comedi_device *dev, struct comedi_subdevice *s,
+ int (*io)(struct comedi_device *dev, int dir, int port,
+ int data, unsigned long context),
+ unsigned long context);
+
unsigned long subdev_8255_regbase(struct comedi_subdevice *s);
#endif
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 07/13] comedi: comedi_8255: Conditionally remove I/O port support
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (5 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 06/13] comedi: comedi_8255: Rework subdevice initialization functions Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 08/13] comedi: ni_labpc_common: " Ian Abbott
` (7 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The comedi_8255 module supports both port I/O and memory-mapped I/O.
Conditionally compile the parts of the module that use port I/O if and
only if the `CONFIG_HAS_IOPORT` macro is defined so that it can still be
built if the port I/O functions have not been declared. If the
`CONFIG_HAS_IOPORT` macro is undefined, replace the GPL-exported
`subdev_8255_io_init()` function with a dummy static inline version that
just returns `-ENXIO`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT` in commit
description.
---
drivers/comedi/drivers/comedi_8255.c | 8 ++++++++
include/linux/comedi/comedi_8255.h | 11 +++++++++++
2 files changed, 19 insertions(+)
diff --git a/drivers/comedi/drivers/comedi_8255.c b/drivers/comedi/drivers/comedi_8255.c
index 28fd9d8c95cc..e4974b508328 100644
--- a/drivers/comedi/drivers/comedi_8255.c
+++ b/drivers/comedi/drivers/comedi_8255.c
@@ -38,6 +38,8 @@ struct subdev_8255_private {
unsigned long context);
};
+#ifdef CONFIG_HAS_IOPORT
+
static int subdev_8255_io(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
@@ -48,6 +50,8 @@ static int subdev_8255_io(struct comedi_device *dev,
return inb(dev->iobase + regbase + port);
}
+#endif /* CONFIG_HAS_IOPORT */
+
static int subdev_8255_mmio(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
@@ -169,6 +173,8 @@ static int __subdev_8255_init(struct comedi_device *dev,
return 0;
}
+#ifdef CONFIG_HAS_IOPORT
+
/**
* subdev_8255_io_init - initialize DIO subdevice for driving I/O mapped 8255
* @dev: comedi device owning subdevice
@@ -186,6 +192,8 @@ int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
}
EXPORT_SYMBOL_GPL(subdev_8255_io_init);
+#endif /* CONFIG_HAS_IOPORT */
+
/**
* subdev_8255_mm_init - initialize DIO subdevice for driving mmio-mapped 8255
* @dev: comedi device owning subdevice
diff --git a/include/linux/comedi/comedi_8255.h b/include/linux/comedi/comedi_8255.h
index b396fcfbf8b0..d24a69da389b 100644
--- a/include/linux/comedi/comedi_8255.h
+++ b/include/linux/comedi/comedi_8255.h
@@ -10,6 +10,8 @@
#ifndef _COMEDI_8255_H
#define _COMEDI_8255_H
+#include <linux/errno.h>
+
#define I8255_SIZE 0x04
#define I8255_DATA_A_REG 0x00
@@ -27,8 +29,17 @@
struct comedi_device;
struct comedi_subdevice;
+#ifdef CONFIG_HAS_IOPORT
int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned long regbase);
+#else
+static inline int subdev_8255_io_init(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned long regbase)
+{
+ return -ENXIO;
+}
+#endif
int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned long regbase);
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 08/13] comedi: ni_labpc_common: Conditionally remove I/O port support
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (6 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 07/13] comedi: comedi_8255: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO Ian Abbott
` (6 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards). The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.
Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_IOPORT`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.
Add a run-time check in the `labpc_common_attach()` to return an error
if the comedi device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT`. Edit commit
message to describe run-time check in `labpc_common_attach()`, and to
mention that the changes allow the module to be built even if the port
I/O functions have not been declared.
---
drivers/comedi/drivers/ni_labpc_common.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index 5d5c1d0e9cb6..7e0ce0ce0adf 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -78,6 +78,9 @@ static const struct comedi_lrange range_labpc_ao = {
* functions that do inb/outb and readb/writeb so we can use
* function pointers to decide which to use
*/
+
+#ifdef CONFIG_HAS_IOPORT
+
static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg)
{
return inb(dev->iobase + reg);
@@ -89,6 +92,8 @@ static void labpc_outb(struct comedi_device *dev,
outb(byte, dev->iobase + reg);
}
+#endif /* CONFIG_HAS_IOPORT */
+
static unsigned int labpc_readb(struct comedi_device *dev, unsigned long reg)
{
return readb(dev->mmio + reg);
@@ -1200,8 +1205,12 @@ int labpc_common_attach(struct comedi_device *dev,
devpriv->read_byte = labpc_readb;
devpriv->write_byte = labpc_writeb;
} else {
+#ifdef CONFIG_HAS_IOPORT
devpriv->read_byte = labpc_inb;
devpriv->write_byte = labpc_outb;
+#else
+ return -ENXIO;
+#endif
}
/* initialize board's command registers */
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (7 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 08/13] comedi: ni_labpc_common: " Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O Ian Abbott
` (5 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The "ni_mio_common.c" file contains calls to both port I/O functions and
memory-mapped I/O functions. The file is `#include`d by "ni_atmio.c",
"ni_mio_cs.c", and "ni_pcimio.c" for the ni_atmio, ni_mio_cs, and
ni_pcimio modules, respectively. Only "ni_pcimio.c" defines the
`PCIDMA` macro before including "ni_mio_common.c" and various bits of
code in "ni_mio_common.c" is conditionally compiled according to whether
that macro is defined or not. Currently, the port I/O function calls
are compiled in regardless of whether the `PCIDMA` macro is defined or
not. However, the fact is that the ni_atmio and ni_mio_cs modules will
never call the memory-mapped I/O functions, and the ni_pcimio module
will never call the port I/O functions.
Calls to the port I/O and memory-mapped I/O functions is confined to the
`ni_writel()`, `ni_writew()`, `ni_writeb()`, `ni_readl()`, `ni_readw()`,
and `ni_readb()` functions which do a run-time test to decide whether to
call the port I/O functions or the memory-mapped I/O functions.
Conditionally compile two variants of the functions so they only call
the port I/O functions if the `PCIDMA` macro is undefined (for the
ni_atmio and ni_mio_cs modules), and only call the memory-mapped I/O
functions if the `PCIDMA` macro is defined (for the ni_pcimio module).
Add a run-time check in the `ni_E_init()` function to return an error if
the comedi device has been set up to use port I/O if `PCIDMA` is
defined, or has been set up to use memory-mapped I/O if `PCIDMA` is not
defined.
The changes make it possible to build the ni_pcimio module even if the
port I/O functions have not been declared. (The ni_atmio and ni_mio_cs
modules do still require the port I/O functions to be declared.)
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
v2: N/A
---
drivers/comedi/drivers/ni_mio_common.c | 70 ++++++++++++++++++--------
1 file changed, 50 insertions(+), 20 deletions(-)
diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c
index 638be08b43e4..980f309d6de7 100644
--- a/drivers/comedi/drivers/ni_mio_common.c
+++ b/drivers/comedi/drivers/ni_mio_common.c
@@ -46,6 +46,12 @@
#include <linux/comedi/comedi_8255.h>
#include "mite.h"
+#ifdef PCIDMA
+#define IS_PCIMIO 1
+#else
+#define IS_PCIMIO 0
+#endif
+
/* A timeout count */
#define NI_TIMEOUT 1000
@@ -219,54 +225,72 @@ enum timebase_nanoseconds {
static const int num_adc_stages_611x = 3;
+#ifdef PCIDMA
+
static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writel(data, dev->mmio + reg);
- else
- outl(data, dev->iobase + reg);
+ writel(data, dev->mmio + reg);
}
static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writew(data, dev->mmio + reg);
- else
- outw(data, dev->iobase + reg);
+ writew(data, dev->mmio + reg);
}
static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writeb(data, dev->mmio + reg);
- else
- outb(data, dev->iobase + reg);
+ writeb(data, dev->mmio + reg);
}
static unsigned int ni_readl(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readl(dev->mmio + reg);
+ return readl(dev->mmio + reg);
+}
+
+static unsigned int ni_readw(struct comedi_device *dev, int reg)
+{
+ return readw(dev->mmio + reg);
+}
+
+static unsigned int ni_readb(struct comedi_device *dev, int reg)
+{
+ return readb(dev->mmio + reg);
+}
+#else /* PCIDMA */
+
+static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outl(data, dev->iobase + reg);
+}
+
+static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outw(data, dev->iobase + reg);
+}
+
+static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outb(data, dev->iobase + reg);
+}
+
+static unsigned int ni_readl(struct comedi_device *dev, int reg)
+{
return inl(dev->iobase + reg);
}
static unsigned int ni_readw(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readw(dev->mmio + reg);
-
return inw(dev->iobase + reg);
}
static unsigned int ni_readb(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readb(dev->mmio + reg);
-
return inb(dev->iobase + reg);
}
+#endif /* PCIDMA */
+
/*
* We automatically take advantage of STC registers that can be
* read/written directly in the I/O space of the board.
@@ -5977,6 +6001,12 @@ static int ni_E_init(struct comedi_device *dev,
int i;
const char *dev_family = devpriv->is_m_series ? "ni_mseries"
: "ni_eseries";
+ if (!IS_PCIMIO != !dev->mmio) {
+ dev_err(dev->class_dev,
+ "%s: bug! %s device not supported.\n",
+ KBUILD_MODNAME, board->name);
+ return -ENXIO;
+ }
/* prepare the device for globally-named routes. */
if (ni_assign_device_routes(dev_family, board->name,
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (8 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 11/13] comedi: amplc_dio200_common: Refactor register access functions Ian Abbott
` (4 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_pci module supports various Amplicon PCI and PCI
Express devices. Some of the supported devices (the PCI ones) use port
I/O, and some of them (the PCIe ones) only use memory-mapped I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined.
Add a run-time check in `dio200_pci_auto_attach()` to return an error if
the device actually requires port I/O (based on the PCI BAR resource
flags) but the `HAS_IOPORT` configuration option is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT` in commit
description.
---
drivers/comedi/drivers/amplc_dio200_pci.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/drivers/amplc_dio200_pci.c b/drivers/comedi/drivers/amplc_dio200_pci.c
index 527994d82a1f..cb5b328a28e3 100644
--- a/drivers/comedi/drivers/amplc_dio200_pci.c
+++ b/drivers/comedi/drivers/amplc_dio200_pci.c
@@ -223,14 +223,17 @@
*/
enum dio200_pci_model {
+#ifdef CONFIG_HAS_IOPORT
pci215_model,
pci272_model,
+#endif /* CONFIG_HAS_IOPORT */
pcie215_model,
pcie236_model,
pcie296_model
};
static const struct dio200_board dio200_pci_boards[] = {
+#ifdef CONFIG_HAS_IOPORT
[pci215_model] = {
.name = "pci215",
.mainbar = 2,
@@ -252,6 +255,7 @@ static const struct dio200_board dio200_pci_boards[] = {
.sdinfo = { 0x00, 0x08, 0x10, 0x3f },
.has_int_sce = true,
},
+#endif /* CONFIG_HAS_IOPORT */
[pcie215_model] = {
.name = "pcie215",
.mainbar = 1,
@@ -364,8 +368,12 @@ static int dio200_pci_auto_attach(struct comedi_device *dev,
"error! cannot remap registers\n");
return -ENOMEM;
}
- } else {
+ } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) {
dev->iobase = pci_resource_start(pci_dev, bar);
+ } else {
+ dev_err(dev->class_dev,
+ "error! need I/O port support\n");
+ return -ENXIO;
}
if (board->is_pcie) {
@@ -385,8 +393,10 @@ static struct comedi_driver dio200_pci_comedi_driver = {
};
static const struct pci_device_id dio200_pci_table[] = {
+#ifdef CONFIG_HAS_IOPORT
{ PCI_VDEVICE(AMPLICON, 0x000b), pci215_model },
{ PCI_VDEVICE(AMPLICON, 0x000a), pci272_model },
+#endif /* CONFIG_HAS_IOPORT */
{ PCI_VDEVICE(AMPLICON, 0x0011), pcie236_model },
{ PCI_VDEVICE(AMPLICON, 0x0012), pcie215_model },
{ PCI_VDEVICE(AMPLICON, 0x0014), pcie296_model },
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 11/13] comedi: amplc_dio200_common: Refactor register access functions
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (9 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support Ian Abbott
` (3 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
The `dio200_read8()`, `dio200_write8()`, `dio200_read32()` and
`dio200_write32()` functions apply a right-shift to the register offset
for some devices and then perform the actual register access. Factor
the register access part out to new functions `dio200___read8()`,
`dio200___write8()`, `dio200___read32()`, and `dio200___write32()`.
This will reduce duplicated code in a subsequent patch that will
conditionally compile support for port I/O as part of the `HAS_IOPORT`
changes.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `HAS_PORTIO` to `HAS_IOPORT` in commit description.
---
drivers/comedi/drivers/amplc_dio200_common.c | 52 ++++++++++++++------
1 file changed, 38 insertions(+), 14 deletions(-)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index 19166cb26f5e..e6d63e89e7bf 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -86,6 +86,40 @@ struct dio200_subdev_intr {
unsigned int active:1;
};
+static unsigned char dio200___read8(struct comedi_device *dev,
+ unsigned int offset)
+{
+ if (dev->mmio)
+ return readb(dev->mmio + offset);
+ return inb(dev->iobase + offset);
+}
+
+static void dio200___write8(struct comedi_device *dev,
+ unsigned int offset, unsigned char val)
+{
+ if (dev->mmio)
+ writeb(val, dev->mmio + offset);
+ else
+ outb(val, dev->iobase + offset);
+}
+
+static unsigned int dio200___read32(struct comedi_device *dev,
+ unsigned int offset)
+{
+ if (dev->mmio)
+ return readl(dev->mmio + offset);
+ return inl(dev->iobase + offset);
+}
+
+static void dio200___write32(struct comedi_device *dev,
+ unsigned int offset, unsigned int val)
+{
+ if (dev->mmio)
+ writel(val, dev->mmio + offset);
+ else
+ outl(val, dev->iobase + offset);
+}
+
static unsigned char dio200_read8(struct comedi_device *dev,
unsigned int offset)
{
@@ -94,9 +128,7 @@ static unsigned char dio200_read8(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- return readb(dev->mmio + offset);
- return inb(dev->iobase + offset);
+ return dio200___read8(dev, offset);
}
static void dio200_write8(struct comedi_device *dev,
@@ -107,10 +139,7 @@ static void dio200_write8(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- writeb(val, dev->mmio + offset);
- else
- outb(val, dev->iobase + offset);
+ dio200___write8(dev, offset, val);
}
static unsigned int dio200_read32(struct comedi_device *dev,
@@ -121,9 +150,7 @@ static unsigned int dio200_read32(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- return readl(dev->mmio + offset);
- return inl(dev->iobase + offset);
+ return dio200___read32(dev, offset);
}
static void dio200_write32(struct comedi_device *dev,
@@ -134,10 +161,7 @@ static void dio200_write32(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- writel(val, dev->mmio + offset);
- else
- outl(val, dev->iobase + offset);
+ dio200___write32(dev, offset, val);
}
static unsigned int dio200_subdev_8254_offset(struct comedi_device *dev,
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (10 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 11/13] comedi: amplc_dio200_common: Refactor register access functions Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
` (2 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_common module is used by the amplc_dio200 module (for
ISA cards) and the amplc_dio200_pci module (for PCI and PCI Express
cards). It supports both port I/O and memory-mapped I/O.
Port I/O and memory-mapped I/O is confined to the `dio200___read8()`,
`dio200___read32()`, `dio200___write8()` and `dio200___write32()`
functions. Conditionally compile two versions of those functions. If
the `CONFIG_HAS_IOPORT` macro is defined, call either the port I/O or
memory mapped I/O functions depending on the `mmio` member of the
`struct comedi_device`. If the `CONFIG_HAS_IOPORT` macro is undefined
only call the memory-mapped I/O functions.
Add a run-time check to `amplc_dio200_common_attach()` to return an
error if the device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT` in commit
description.
---
drivers/comedi/drivers/amplc_dio200_common.c | 36 ++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index e6d63e89e7bf..b1a9b4c4a185 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -86,6 +86,8 @@ struct dio200_subdev_intr {
unsigned int active:1;
};
+#ifdef CONFIG_HAS_IOPORT
+
static unsigned char dio200___read8(struct comedi_device *dev,
unsigned int offset)
{
@@ -120,6 +122,34 @@ static void dio200___write32(struct comedi_device *dev,
outl(val, dev->iobase + offset);
}
+#else /* CONFIG_HAS_IOPORT */
+
+static unsigned char dio200___read8(struct comedi_device *dev,
+ unsigned int offset)
+{
+ return readb(dev->mmio + offset);
+}
+
+static void dio200___write8(struct comedi_device *dev,
+ unsigned int offset, unsigned char val)
+{
+ writeb(val, dev->mmio + offset);
+}
+
+static unsigned int dio200___read32(struct comedi_device *dev,
+ unsigned int offset)
+{
+ return readl(dev->mmio + offset);
+}
+
+static void dio200___write32(struct comedi_device *dev,
+ unsigned int offset, unsigned int val)
+{
+ writel(val, dev->mmio + offset);
+}
+
+#endif /* CONFIG_HAS_IOPORT */
+
static unsigned char dio200_read8(struct comedi_device *dev,
unsigned int offset)
{
@@ -803,6 +833,12 @@ int amplc_dio200_common_attach(struct comedi_device *dev, unsigned int irq,
unsigned int n;
int ret;
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT) && !dev->mmio) {
+ dev_err(dev->class_dev,
+ "error! need I/O port support\n");
+ return -ENXIO;
+ }
+
ret = comedi_alloc_subdevices(dev, board->n_subdevs);
if (ret)
return ret;
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v2 13/13] comedi: add HAS_IOPORT dependencies again
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (11 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 16:40 ` Ian Abbott
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 17:16 ` [PATCH v2 " Ian Abbott
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
This was previously done in commit b5c75b68b7de ("comedi: add HAS_IOPORT
dependencies"), but that has been reverted because it made it impossible
to select configuration options for several comedi drivers. This is a
do-over that avoids that.
Since the original patch, modifications have been made to various comedi
modules so that they can still be built even if the port I/O functions
have not been declared, so the configuration options for building those
modules no longer need to depend on HAS_IOPORT.
Make the COMEDI_ISA_DRIVERS menu option (which allows configuration
options for ISA and PC/104 drivers to be selected) depend on HAS_IOPORT,
and also depend on ISA || ISA_BUS || PC104.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A
---
drivers/comedi/Kconfig | 44 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 536101f68e0f..93c68a40a17b 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -67,6 +67,7 @@ config COMEDI_TEST
config COMEDI_PARPORT
tristate "Parallel port support"
+ depends on HAS_IOPORT
help
Enable support for the standard parallel port.
A cheap and easy way to get a few more digital I/O lines. Steal
@@ -79,6 +80,7 @@ config COMEDI_PARPORT
config COMEDI_SSV_DNP
tristate "SSV Embedded Systems DIL/Net-PC support"
depends on X86_32 || COMPILE_TEST
+ depends on HAS_IOPORT
help
Enable support for SSV Embedded Systems DIL/Net-PC
@@ -89,6 +91,8 @@ endif # COMEDI_MISC_DRIVERS
menuconfig COMEDI_ISA_DRIVERS
bool "Comedi ISA and PC/104 drivers"
+ depends on ISA || ISA_BUS || PC104
+ depends on HAS_IOPORT
help
Enable comedi ISA and PC/104 drivers to be built
@@ -589,6 +593,7 @@ config COMEDI_8255_PCI
config COMEDI_ADDI_WATCHDOG
tristate
+ depends on HAS_IOPORT
help
Provides support for the watchdog subdevice found on many ADDI-DATA
boards. This module will be automatically selected when needed. The
@@ -596,6 +601,7 @@ config COMEDI_ADDI_WATCHDOG
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_1032 cards
@@ -604,6 +610,7 @@ config COMEDI_ADDI_APCI_1032
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_1500 cards
@@ -612,6 +619,7 @@ config COMEDI_ADDI_APCI_1500
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI-1016/1516/2016 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
@@ -623,6 +631,7 @@ config COMEDI_ADDI_APCI_1516
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_1564 cards
@@ -632,6 +641,7 @@ config COMEDI_ADDI_APCI_1564
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_16xx cards
@@ -640,6 +650,7 @@ config COMEDI_ADDI_APCI_16XX
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2032 cards
@@ -649,6 +660,7 @@ config COMEDI_ADDI_APCI_2032
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2200 cards
@@ -658,6 +670,7 @@ config COMEDI_ADDI_APCI_2200
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3120/3001 support"
+ depends on HAS_IOPORT
depends on HAS_DMA
help
Enable support for ADDI-DATA APCI_3120/3001 cards
@@ -667,6 +680,7 @@ config COMEDI_ADDI_APCI_3120
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_3501 cards
@@ -675,6 +689,7 @@ config COMEDI_ADDI_APCI_3501
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_3xxx cards
@@ -683,6 +698,7 @@ config COMEDI_ADDI_APCI_3XXX
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
+ depends on HAS_IOPORT
help
Enable support for ADLink PCI-6208A cards
@@ -691,6 +707,7 @@ config COMEDI_ADL_PCI6208
config COMEDI_ADL_PCI7X3X
tristate "ADLink PCI-723X/743X isolated digital i/o board support"
+ depends on HAS_IOPORT
help
Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
Supported boards include the 32-channel PCI-7230 (16 in/16 out),
@@ -702,6 +719,7 @@ config COMEDI_ADL_PCI7X3X
config COMEDI_ADL_PCI8164
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
+ depends on HAS_IOPORT
help
Enable support for ADlink PCI-8164 4 Axes Motion Control board
@@ -710,6 +728,7 @@ config COMEDI_ADL_PCI8164
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for ADlink PCI9111 cards
@@ -719,6 +738,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
+ depends on HAS_IOPORT
depends on HAS_DMA
select COMEDI_8254
help
@@ -729,6 +749,7 @@ config COMEDI_ADL_PCI9118
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x and PCI-1731 support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
@@ -739,6 +760,7 @@ config COMEDI_ADV_PCI1710
config COMEDI_ADV_PCI1720
tristate "Advantech PCI-1720 support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1720 Analog Output board.
@@ -747,6 +769,7 @@ config COMEDI_ADV_PCI1720
config COMEDI_ADV_PCI1723
tristate "Advantech PCI-1723 support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1723 cards
@@ -755,6 +778,7 @@ config COMEDI_ADV_PCI1723
config COMEDI_ADV_PCI1724
tristate "Advantech PCI-1724U support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1724U cards. These are 32-channel
analog output cards with voltage and current loop output ranges and
@@ -765,6 +789,7 @@ config COMEDI_ADV_PCI1724
config COMEDI_ADV_PCI1760
tristate "Advantech PCI-1760 support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1760 board.
@@ -773,6 +798,7 @@ config COMEDI_ADV_PCI1760
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -796,6 +822,7 @@ config COMEDI_AMPLC_DIO200_PCI
config COMEDI_AMPLC_PC236_PCI
tristate "Amplicon PCI236 DIO board support"
+ depends on HAS_IOPORT
select COMEDI_AMPLC_PC236
help
Enable support for Amplicon PCI236 DIO board.
@@ -805,6 +832,7 @@ config COMEDI_AMPLC_PC236_PCI
config COMEDI_AMPLC_PC263_PCI
tristate "Amplicon PCI263 relay board support"
+ depends on HAS_IOPORT
help
Enable support for Amplicon PCI263 relay board. This is a PCI board
with 16 reed relay output channels.
@@ -814,6 +842,7 @@ config COMEDI_AMPLC_PC263_PCI
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for Amplicon PCI224 and PCI234 AO boards
@@ -823,6 +852,7 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -834,6 +864,7 @@ config COMEDI_AMPLC_PCI230
config COMEDI_CONTEC_PCI_DIO
tristate "Contec PIO1616L digital I/O board support"
+ depends on HAS_IOPORT
help
Enable support for the Contec PIO1616L digital I/O board
@@ -842,6 +873,7 @@ config COMEDI_CONTEC_PCI_DIO
config COMEDI_DAS08_PCI
tristate "DAS-08 PCI support"
+ depends on HAS_IOPORT
select COMEDI_DAS08
help
Enable support for PCI DAS-08 cards.
@@ -861,6 +893,7 @@ config COMEDI_DT3000
config COMEDI_DYNA_PCI10XX
tristate "Dynalog PCI DAQ series support"
+ depends on HAS_IOPORT
help
Enable support for Dynalog PCI DAQ series
PCI-1050
@@ -911,6 +944,7 @@ config COMEDI_JR3_PCI
config COMEDI_KE_COUNTER
tristate "Kolter-Electronic PCI Counter 1 card support"
+ depends on HAS_IOPORT
help
Enable support for Kolter-Electronic PCI Counter 1 cards
@@ -929,6 +963,7 @@ config COMEDI_CB_PCIDAS64
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -942,6 +977,7 @@ config COMEDI_CB_PCIDAS
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -953,6 +989,7 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -964,6 +1001,7 @@ config COMEDI_CB_PCIMDAS
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -973,6 +1011,7 @@ config COMEDI_CB_PCIMDDA
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for Meilhaus PCI data acquisition cards
@@ -1102,7 +1141,7 @@ endif # COMEDI_PCI_DRIVERS
menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Enable support for comedi PCMCIA drivers.
@@ -1253,6 +1292,7 @@ config COMEDI_8255
config COMEDI_8255_SA
tristate "Standalone 8255 support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for 8255 digital I/O as a standalone driver.
@@ -1289,10 +1329,12 @@ config COMEDI_AMPLC_DIO200
config COMEDI_AMPLC_PC236
tristate
+ depends on HAS_IOPORT
select COMEDI_8255
config COMEDI_DAS08
tristate
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* Re: [PATCH v2 04/13] comedi: comedi_8254: Conditionally remove I/O port support
2023-09-13 16:40 ` [PATCH v2 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 16:46 ` Ian Abbott
0 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 16:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, H Hartley Sweeten, Arnd Bergmann, Niklas Schnelle
On 13/09/2023 17:40, Ian Abbott wrote:
> The comedi_8254 module supports both port I/O and memory-mapped I/O.
> In a future patch, the port I/O functions (`inb()`, `outb()`, and
> friends) will only be declared if the `HAS_IOPORT` configuration option
> is enabled.
>
> Conditionally compile the parts of the module that use port I/O so they
> are compiled if and only if the `CONFIG_HAS_IOPORT` macro is defined, so
> that it can still be built if the port I/O functions have not been
> declared. If `CONFIG_HAS_IOPORT` is undefined, replace the GPL-exported
> `comedi_8254_io_alloc()` function with a dummy static inline version
> that just returns `ERR_PTR(-ENXIO)`.
>
> Cc: Arnd Bergmann <arnd@kernel.org>
> Cc: Niklas Schnelle <schnelle@linux.ibm.com>
> Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
> v2: N/A
> ---
Oops. I forgot the --- dividing line before the patch change log. (Same
mistake in patches 06 and 09. Time for a v3. Sorry about that.
--
-=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company )=-
-=( registered in England & Wales. Regd. number: 02862268. )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (12 preceding siblings ...)
2023-09-13 16:40 ` [PATCH v2 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
@ 2023-09-13 17:06 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
` (13 more replies)
2023-09-13 17:16 ` [PATCH v2 " Ian Abbott
14 siblings, 14 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:06 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
Commit b5c75b68b7de ("comedi: add HAS_IOPORT dependencies") was reverted
because it made it impossible to select configuration options that
depend on the COMEDI_8254, COMEDI_DAS08, COMEDI_NI_LABPC, or
COMEDI_AMPLC_DIO200 options due to changing 'select' directives to
'depends on' directives and there being no other way to select those
codependent configuration options.
This patch series conditionally removes port I/O support from various
comedi modules so they still be built when a future patch removes the
port I/O functions (inb(), outb() and friends) unless the HAS_IOPORT
configuration option is selected. The final patch 13 adds HAS_IOPORT
dependencies to the configuration options as in the reverted patch, but
there are now fewer options that need to depend on HAS_IOPORT, and the
'select' directives have not been replaced with 'depends on' directives.
01) comedi: Correct dependencies for COMEDI_NI_PCIDIO
02) comedi: comedi_8254: Use a call-back function for register access
03) comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init()
04) comedi: comedi_8254: Conditionally remove I/O port support
05) comedi: 8255_pci: Conditionally remove devices that use port I/O
06) comedi: comedi_8255: Rework subdevice initialization functions
07) comedi: comedi_8255: Conditionally remove I/O port support
08) comedi: ni_labpc_common: Conditionally remove I/O port support
09) comedi: ni_mio_common: Conditionally use I/O port or MMIO
10) comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O
11) comedi: amplc_dio200_common: Refactor register access functions
12) comedi: amplc_dio200_common: Conditionally remove I/O port support
13) comedi: add HAS_IOPORT dependencies again
=============================
v2:
0. Patch titles and numbering is unchanged since v1.
1. Corrects [CONFIG_]HAS_PORTIO to [CONFIG_]HAS_IOPORT in the code for
patches 05 and 08, and in the description for patches 05, 06, 08, 10,
11, and 12.
2. Enhances the commit description for patch 08 a bit.
======
v3:
0. Patch titles and numbering is unchanged since v2.
1. Adds missing `---` divider lines before patch changelogs for patches
06 and 09.
2. The 'In-Reply-To:' and 'References:' email headers were incorrect in
the v2 series.
=============================
drivers/comedi/Kconfig | 45 +++++-
drivers/comedi/drivers.c | 3 +-
drivers/comedi/drivers/8255.c | 2 +-
drivers/comedi/drivers/8255_pci.c | 15 +-
drivers/comedi/drivers/adl_pci9111.c | 8 +-
drivers/comedi/drivers/adl_pci9118.c | 8 +-
drivers/comedi/drivers/adv_pci1710.c | 8 +-
drivers/comedi/drivers/adv_pci_dio.c | 14 +-
drivers/comedi/drivers/aio_aio12_8.c | 10 +-
drivers/comedi/drivers/amplc_dio200_common.c | 104 +++++++++---
drivers/comedi/drivers/amplc_dio200_pci.c | 12 +-
drivers/comedi/drivers/amplc_pc236_common.c | 2 +-
drivers/comedi/drivers/amplc_pci224.c | 8 +-
drivers/comedi/drivers/amplc_pci230.c | 10 +-
drivers/comedi/drivers/cb_das16_cs.c | 8 +-
drivers/comedi/drivers/cb_pcidas.c | 23 +--
drivers/comedi/drivers/cb_pcidas64.c | 7 +-
drivers/comedi/drivers/cb_pcidda.c | 2 +-
drivers/comedi/drivers/cb_pcimdas.c | 12 +-
drivers/comedi/drivers/cb_pcimdda.c | 2 +-
drivers/comedi/drivers/comedi_8254.c | 234 ++++++++++++++++++---------
drivers/comedi/drivers/comedi_8255.c | 123 +++++++-------
drivers/comedi/drivers/daqboard2000.c | 4 +-
drivers/comedi/drivers/das08.c | 11 +-
drivers/comedi/drivers/das16.c | 10 +-
drivers/comedi/drivers/das16m1.c | 22 +--
drivers/comedi/drivers/das1800.c | 8 +-
drivers/comedi/drivers/das6402.c | 8 +-
drivers/comedi/drivers/das800.c | 8 +-
drivers/comedi/drivers/dmm32at.c | 3 +-
drivers/comedi/drivers/me4000.c | 6 +-
drivers/comedi/drivers/ni_at_a2150.c | 8 +-
drivers/comedi/drivers/ni_at_ao.c | 8 +-
drivers/comedi/drivers/ni_atmio16d.c | 2 +-
drivers/comedi/drivers/ni_daq_dio24.c | 2 +-
drivers/comedi/drivers/ni_labpc_common.c | 51 +++---
drivers/comedi/drivers/ni_mio_common.c | 74 ++++++---
drivers/comedi/drivers/pcl711.c | 8 +-
drivers/comedi/drivers/pcl724.c | 6 +-
drivers/comedi/drivers/pcl812.c | 10 +-
drivers/comedi/drivers/pcl816.c | 8 +-
drivers/comedi/drivers/pcl818.c | 8 +-
drivers/comedi/drivers/pcm3724.c | 2 +-
drivers/comedi/drivers/rtd520.c | 6 +-
include/linux/comedi/comedi_8254.h | 51 ++++--
include/linux/comedi/comedi_8255.h | 24 ++-
46 files changed, 649 insertions(+), 359 deletions(-)
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v3 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 02/13] comedi: comedi_8254: Use a call-back function for register access Ian Abbott
` (12 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
The ni_pcidio module does not depend on the comedi_8255 module, so
change the `COMEDI_NI_PCIDIO` configuration option to not select
`COMEDI_8255` and remove the inherited dependency on `HAS_IOPORT`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: N/A.
---
drivers/comedi/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 9af280735cba..536101f68e0f 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -1042,7 +1042,6 @@ config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
depends on HAS_DMA
select COMEDI_MITE
- select COMEDI_8255
help
Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
PCI-6533 and PCI-6534
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 02/13] comedi: comedi_8254: Use a call-back function for register access
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 17:07 ` [PATCH v3 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init() Ian Abbott
` (11 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
Rework the comedi_8254 module to use a call-back function for register
access. This will make it easier to isolate the parts that will depend
on the `CONFIG_HAS_IOPORT` macro being defined and also allows the
possibility of supplying an external callback function during
initialization by a variant of the `comedi_8254_init()` and
`comedi_8254_mm_init()` functions, although that has not been
implemented yet.
The `struct comedi_8254` members have been changed to use a pointer to a
callback function and a context of type `unsigned long`. The
`comedi_8254_init()` and `comedi_8254_mm_init()` functions use an
internal callback function and set the context to the base address of
the registers (for `comedi_8254_mm_init()` that involves converting a
`void __iomem *` to `unsigned long`).
A minor change to `dio200_subdev_8254_offset()` in the
amplc_dio200_common module has been made due to the changes in `struct
comedi_8254`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: N/A.
---
drivers/comedi/drivers/amplc_dio200_common.c | 4 +-
drivers/comedi/drivers/comedi_8254.c | 177 +++++++++++++------
include/linux/comedi/comedi_8254.h | 22 ++-
3 files changed, 144 insertions(+), 59 deletions(-)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index ff651f2eb86c..2c1507a23f8a 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -149,9 +149,9 @@ static unsigned int dio200_subdev_8254_offset(struct comedi_device *dev,
/* get the offset that was passed to comedi_8254_*_init() */
if (dev->mmio)
- offset = i8254->mmio - dev->mmio;
+ offset = (void __iomem *)i8254->context - dev->mmio;
else
- offset = i8254->iobase - dev->iobase;
+ offset = i8254->context - dev->iobase;
/* remove the shift that was added for PCIe boards */
if (board->is_pcie)
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index b4185c1b2695..3f8657fc7ee5 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -119,63 +119,101 @@
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_8254.h>
-static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg)
+static unsigned int i8254_io8_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
{
- unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift;
- unsigned int val;
+ unsigned long iobase = i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO8) << i8254->regshift;
- switch (i8254->iosize) {
- default:
- case I8254_IO8:
- if (i8254->mmio)
- val = readb(i8254->mmio + reg_offset);
- else
- val = inb(i8254->iobase + reg_offset);
- break;
- case I8254_IO16:
- if (i8254->mmio)
- val = readw(i8254->mmio + reg_offset);
- else
- val = inw(i8254->iobase + reg_offset);
- break;
- case I8254_IO32:
- if (i8254->mmio)
- val = readl(i8254->mmio + reg_offset);
- else
- val = inl(i8254->iobase + reg_offset);
- break;
+ if (dir) {
+ outb(val, iobase + reg_offset);
+ return 0;
+ } else {
+ return inb(iobase + reg_offset);
}
- return val & 0xff;
}
-static void __i8254_write(struct comedi_8254 *i8254,
- unsigned int val, unsigned int reg)
+static unsigned int i8254_io16_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
{
- unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift;
+ unsigned long iobase = i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO16) << i8254->regshift;
- switch (i8254->iosize) {
- default:
- case I8254_IO8:
- if (i8254->mmio)
- writeb(val, i8254->mmio + reg_offset);
- else
- outb(val, i8254->iobase + reg_offset);
- break;
- case I8254_IO16:
- if (i8254->mmio)
- writew(val, i8254->mmio + reg_offset);
- else
- outw(val, i8254->iobase + reg_offset);
- break;
- case I8254_IO32:
- if (i8254->mmio)
- writel(val, i8254->mmio + reg_offset);
- else
- outl(val, i8254->iobase + reg_offset);
- break;
+ if (dir) {
+ outw(val, iobase + reg_offset);
+ return 0;
+ } else {
+ return inw(iobase + reg_offset);
+ }
+}
+
+static unsigned int i8254_io32_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ unsigned long iobase = i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO32) << i8254->regshift;
+
+ if (dir) {
+ outl(val, iobase + reg_offset);
+ return 0;
+ } else {
+ return inl(iobase + reg_offset);
+ }
+}
+
+static unsigned int i8254_mmio8_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ void __iomem *mmiobase = (void __iomem *)i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO8) << i8254->regshift;
+
+ if (dir) {
+ writeb(val, mmiobase + reg_offset);
+ return 0;
+ } else {
+ return readb(mmiobase + reg_offset);
+ }
+}
+
+static unsigned int i8254_mmio16_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ void __iomem *mmiobase = (void __iomem *)i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO16) << i8254->regshift;
+
+ if (dir) {
+ writew(val, mmiobase + reg_offset);
+ return 0;
+ } else {
+ return readw(mmiobase + reg_offset);
}
}
+static unsigned int i8254_mmio32_cb(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val)
+{
+ void __iomem *mmiobase = (void __iomem *)i8254->context;
+ unsigned int reg_offset = (reg * I8254_IO32) << i8254->regshift;
+
+ if (dir) {
+ writel(val, mmiobase + reg_offset);
+ return 0;
+ } else {
+ return readl(mmiobase + reg_offset);
+ }
+}
+
+static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg)
+{
+ return 0xff & i8254->iocb(i8254, 0, reg, 0);
+}
+
+static void __i8254_write(struct comedi_8254 *i8254,
+ unsigned int val, unsigned int reg)
+{
+ i8254->iocb(i8254, 1, reg, val);
+}
+
/**
* comedi_8254_status - return the status of a counter
* @i8254: comedi_8254 struct for the timer
@@ -571,8 +609,8 @@ void comedi_8254_subdevice_init(struct comedi_subdevice *s,
}
EXPORT_SYMBOL_GPL(comedi_8254_subdevice_init);
-static struct comedi_8254 *__i8254_init(unsigned long iobase,
- void __iomem *mmio,
+static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
+ unsigned long context,
unsigned int osc_base,
unsigned int iosize,
unsigned int regshift)
@@ -585,12 +623,15 @@ static struct comedi_8254 *__i8254_init(unsigned long iobase,
iosize == I8254_IO32))
return NULL;
+ if (!iocb)
+ return NULL;
+
i8254 = kzalloc(sizeof(*i8254), GFP_KERNEL);
if (!i8254)
return NULL;
- i8254->iobase = iobase;
- i8254->mmio = mmio;
+ i8254->iocb = iocb;
+ i8254->context = context;
i8254->iosize = iosize;
i8254->regshift = regshift;
@@ -617,7 +658,22 @@ struct comedi_8254 *comedi_8254_init(unsigned long iobase,
unsigned int iosize,
unsigned int regshift)
{
- return __i8254_init(iobase, NULL, osc_base, iosize, regshift);
+ comedi_8254_iocb_fn *iocb;
+
+ switch (iosize) {
+ case I8254_IO8:
+ iocb = i8254_io8_cb;
+ break;
+ case I8254_IO16:
+ iocb = i8254_io16_cb;
+ break;
+ case I8254_IO32:
+ iocb = i8254_io32_cb;
+ break;
+ default:
+ return NULL;
+ }
+ return __i8254_init(iocb, iobase, osc_base, iosize, regshift);
}
EXPORT_SYMBOL_GPL(comedi_8254_init);
@@ -634,7 +690,22 @@ struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
unsigned int iosize,
unsigned int regshift)
{
- return __i8254_init(0, mmio, osc_base, iosize, regshift);
+ comedi_8254_iocb_fn *iocb;
+
+ switch (iosize) {
+ case I8254_IO8:
+ iocb = i8254_mmio8_cb;
+ break;
+ case I8254_IO16:
+ iocb = i8254_mmio16_cb;
+ break;
+ case I8254_IO32:
+ iocb = i8254_mmio32_cb;
+ break;
+ default:
+ return NULL;
+ }
+ return __i8254_init(iocb, (unsigned long)mmio, osc_base, iosize, regshift);
}
EXPORT_SYMBOL_GPL(comedi_8254_mm_init);
diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h
index d8264417e53c..18d12321c87d 100644
--- a/include/linux/comedi/comedi_8254.h
+++ b/include/linux/comedi/comedi_8254.h
@@ -57,10 +57,24 @@ struct comedi_subdevice;
/* counter maps zero to 0x10000 */
#define I8254_MAX_COUNT 0x10000
+struct comedi_8254;
+
+/**
+ * typedef comedi_8254_iocb_fn - call-back function type for 8254 register access
+ * @i8254: pointer to struct comedi_8254
+ * @dir: direction (0 = read, 1 = write)
+ * @reg: register number
+ * @val: value to write
+ *
+ * Return: Register value when reading, 0 when writing.
+ */
+typedef unsigned int comedi_8254_iocb_fn(struct comedi_8254 *i8254, int dir,
+ unsigned int reg, unsigned int val);
+
/**
* struct comedi_8254 - private data used by this module
- * @iobase: PIO base address of the registers (in/out)
- * @mmio: MMIO base address of the registers (read/write)
+ * @iocb: I/O call-back function for register access
+ * @context: context for register access (e.g. a base address)
* @iosize: I/O size used to access the registers (b/w/l)
* @regshift: register gap shift
* @osc_base: cascaded oscillator speed in ns
@@ -76,8 +90,8 @@ struct comedi_subdevice;
* @insn_config: driver specific (*insn_config) callback
*/
struct comedi_8254 {
- unsigned long iobase;
- void __iomem *mmio;
+ comedi_8254_iocb_fn *iocb;
+ unsigned long context;
unsigned int iosize;
unsigned int regshift;
unsigned int osc_base;
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init()
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 17:07 ` [PATCH v3 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
2023-09-13 17:07 ` [PATCH v3 02/13] comedi: comedi_8254: Use a call-back function for register access Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
` (10 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
`comedi_8254_init()` and `comedi_8254_mm_init()` return `NULL` on
failure, but the failure is not necessarily due to lack of memory.
Change them to return an `ERR_PTR` value on failure and rename the
functions to make it obvious the API has changed. `comedi_8254_init()`
has been replaced with `comedi_8254_io_alloc()`, and
`comedi_8254_mm_init()` has been replaced with `comedi_8254_mm_alloc()`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: N/A.
---
drivers/comedi/drivers.c | 3 +-
drivers/comedi/drivers/adl_pci9111.c | 8 +--
drivers/comedi/drivers/adl_pci9118.c | 8 +--
drivers/comedi/drivers/adv_pci1710.c | 8 +--
drivers/comedi/drivers/adv_pci_dio.c | 10 ++--
drivers/comedi/drivers/aio_aio12_8.c | 8 +--
drivers/comedi/drivers/amplc_dio200_common.c | 12 ++---
drivers/comedi/drivers/amplc_pci224.c | 8 +--
drivers/comedi/drivers/amplc_pci230.c | 8 +--
drivers/comedi/drivers/cb_das16_cs.c | 8 +--
drivers/comedi/drivers/cb_pcidas.c | 21 ++++----
drivers/comedi/drivers/cb_pcimdas.c | 10 ++--
drivers/comedi/drivers/comedi_8254.c | 55 +++++++++++---------
drivers/comedi/drivers/das08.c | 9 ++--
drivers/comedi/drivers/das16.c | 8 +--
drivers/comedi/drivers/das16m1.c | 20 +++----
drivers/comedi/drivers/das1800.c | 8 +--
drivers/comedi/drivers/das6402.c | 8 +--
drivers/comedi/drivers/das800.c | 8 +--
drivers/comedi/drivers/me4000.c | 6 +--
drivers/comedi/drivers/ni_at_a2150.c | 8 +--
drivers/comedi/drivers/ni_at_ao.c | 8 +--
drivers/comedi/drivers/ni_labpc_common.c | 38 +++++++-------
drivers/comedi/drivers/pcl711.c | 8 +--
drivers/comedi/drivers/pcl812.c | 10 ++--
drivers/comedi/drivers/pcl816.c | 8 +--
drivers/comedi/drivers/pcl818.c | 8 +--
drivers/comedi/drivers/rtd520.c | 6 +--
include/linux/comedi/comedi_8254.h | 16 +++---
29 files changed, 179 insertions(+), 165 deletions(-)
diff --git a/drivers/comedi/drivers.c b/drivers/comedi/drivers.c
index d4e2ed709bfc..376130bfba8a 100644
--- a/drivers/comedi/drivers.c
+++ b/drivers/comedi/drivers.c
@@ -177,7 +177,8 @@ static void comedi_device_detach_cleanup(struct comedi_device *dev)
dev->n_subdevices = 0;
}
kfree(dev->private);
- kfree(dev->pacer);
+ if (!IS_ERR(dev->pacer))
+ kfree(dev->pacer);
dev->private = NULL;
dev->pacer = NULL;
dev->driver = NULL;
diff --git a/drivers/comedi/drivers/adl_pci9111.c b/drivers/comedi/drivers/adl_pci9111.c
index c50f94272a74..086d93f40cb9 100644
--- a/drivers/comedi/drivers/adl_pci9111.c
+++ b/drivers/comedi/drivers/adl_pci9111.c
@@ -647,10 +647,10 @@ static int pci9111_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq;
}
- dev->pacer = comedi_8254_init(dev->iobase + PCI9111_8254_BASE_REG,
- I8254_OSC_BASE_2MHZ, I8254_IO16, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9111_8254_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO16, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
index 9a816c718303..a76e2666d583 100644
--- a/drivers/comedi/drivers/adl_pci9118.c
+++ b/drivers/comedi/drivers/adl_pci9118.c
@@ -1524,10 +1524,10 @@ static int pci9118_common_attach(struct comedi_device *dev,
devpriv->iobase_a = pci_resource_start(pcidev, 0);
dev->iobase = pci_resource_start(pcidev, 2);
- dev->pacer = comedi_8254_init(dev->iobase + PCI9118_TIMER_BASE,
- I8254_OSC_BASE_4MHZ, I8254_IO32, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9118_TIMER_BASE,
+ I8254_OSC_BASE_4MHZ, I8254_IO32, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
pci9118_reset(dev);
diff --git a/drivers/comedi/drivers/adv_pci1710.c b/drivers/comedi/drivers/adv_pci1710.c
index 4f2639968260..c49b0f1f5228 100644
--- a/drivers/comedi/drivers/adv_pci1710.c
+++ b/drivers/comedi/drivers/adv_pci1710.c
@@ -767,10 +767,10 @@ static int pci1710_auto_attach(struct comedi_device *dev,
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
- dev->pacer = comedi_8254_init(dev->iobase + PCI171X_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI171X_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
n_subdevices = 1; /* all boards have analog inputs */
if (board->has_ao)
diff --git a/drivers/comedi/drivers/adv_pci_dio.c b/drivers/comedi/drivers/adv_pci_dio.c
index efa3e46b554b..0319d8c7ee47 100644
--- a/drivers/comedi/drivers/adv_pci_dio.c
+++ b/drivers/comedi/drivers/adv_pci_dio.c
@@ -664,11 +664,11 @@ static int pci_dio_auto_attach(struct comedi_device *dev,
if (board->timer_regbase) {
s = &dev->subdevices[subdev++];
- dev->pacer = comedi_8254_init(dev->iobase +
- board->timer_regbase,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + board->timer_regbase,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
comedi_8254_subdevice_init(s, dev->pacer);
}
diff --git a/drivers/comedi/drivers/aio_aio12_8.c b/drivers/comedi/drivers/aio_aio12_8.c
index 30b8a32204d8..f9d40fa3d3a9 100644
--- a/drivers/comedi/drivers/aio_aio12_8.c
+++ b/drivers/comedi/drivers/aio_aio12_8.c
@@ -206,10 +206,10 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
if (ret)
return ret;
- dev->pacer = comedi_8254_init(dev->iobase + AIO12_8_8254_BASE_REG,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + AIO12_8_8254_BASE_REG,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index 2c1507a23f8a..19166cb26f5e 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -556,14 +556,14 @@ static int dio200_subdev_8254_init(struct comedi_device *dev,
}
if (dev->mmio) {
- i8254 = comedi_8254_mm_init(dev->mmio + offset,
- 0, I8254_IO8, regshift);
+ i8254 = comedi_8254_mm_alloc(dev->mmio + offset,
+ 0, I8254_IO8, regshift);
} else {
- i8254 = comedi_8254_init(dev->iobase + offset,
- 0, I8254_IO8, regshift);
+ i8254 = comedi_8254_io_alloc(dev->iobase + offset,
+ 0, I8254_IO8, regshift);
}
- if (!i8254)
- return -ENOMEM;
+ if (IS_ERR(i8254))
+ return PTR_ERR(i8254);
comedi_8254_subdevice_init(s, i8254);
diff --git a/drivers/comedi/drivers/amplc_pci224.c b/drivers/comedi/drivers/amplc_pci224.c
index 5a04e55daeea..1373637c2ca2 100644
--- a/drivers/comedi/drivers/amplc_pci224.c
+++ b/drivers/comedi/drivers/amplc_pci224.c
@@ -1051,10 +1051,10 @@ pci224_auto_attach(struct comedi_device *dev, unsigned long context_model)
outw(devpriv->daccon | PCI224_DACCON_FIFORESET,
dev->iobase + PCI224_DACCON);
- dev->pacer = comedi_8254_init(devpriv->iobase1 + PCI224_Z2_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(devpriv->iobase1 + PCI224_Z2_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
diff --git a/drivers/comedi/drivers/amplc_pci230.c b/drivers/comedi/drivers/amplc_pci230.c
index 92ba8b8c0172..783da73877b9 100644
--- a/drivers/comedi/drivers/amplc_pci230.c
+++ b/drivers/comedi/drivers/amplc_pci230.c
@@ -2475,10 +2475,10 @@ static int pci230_auto_attach(struct comedi_device *dev,
dev->irq = pci_dev->irq;
}
- dev->pacer = comedi_8254_init(dev->iobase + PCI230_Z2_CT_BASE,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI230_Z2_CT_BASE,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
rc = comedi_alloc_subdevices(dev, 3);
if (rc)
diff --git a/drivers/comedi/drivers/cb_das16_cs.c b/drivers/comedi/drivers/cb_das16_cs.c
index 8e0d2fa5f95d..306208a0695b 100644
--- a/drivers/comedi/drivers/cb_das16_cs.c
+++ b/drivers/comedi/drivers/cb_das16_cs.c
@@ -363,10 +363,10 @@ static int das16cs_auto_attach(struct comedi_device *dev,
if (!devpriv)
return -ENOMEM;
- dev->pacer = comedi_8254_init(dev->iobase + DAS16CS_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16CS_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO16, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/cb_pcidas.c b/drivers/comedi/drivers/cb_pcidas.c
index 0c7576b967fc..7a6cd681e932 100644
--- a/drivers/comedi/drivers/cb_pcidas.c
+++ b/drivers/comedi/drivers/cb_pcidas.c
@@ -1288,16 +1288,16 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev,
}
dev->irq = pcidev->irq;
- dev->pacer = comedi_8254_init(dev->iobase + PCIDAS_AI_8254_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCIDAS_AI_8254_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
- devpriv->ao_pacer = comedi_8254_init(dev->iobase + PCIDAS_AO_8254_BASE,
- I8254_OSC_BASE_10MHZ,
- I8254_IO8, 0);
- if (!devpriv->ao_pacer)
- return -ENOMEM;
+ devpriv->ao_pacer =
+ comedi_8254_io_alloc(dev->iobase + PCIDAS_AO_8254_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(devpriv->ao_pacer))
+ return PTR_ERR(devpriv->ao_pacer);
ret = comedi_alloc_subdevices(dev, 7);
if (ret)
@@ -1453,7 +1453,8 @@ static void cb_pcidas_detach(struct comedi_device *dev)
if (devpriv->amcc)
outl(INTCSR_INBOX_INTR_STATUS,
devpriv->amcc + AMCC_OP_REG_INTCSR);
- kfree(devpriv->ao_pacer);
+ if (!IS_ERR(devpriv->ao_pacer))
+ kfree(devpriv->ao_pacer);
}
comedi_pci_detach(dev);
}
diff --git a/drivers/comedi/drivers/cb_pcimdas.c b/drivers/comedi/drivers/cb_pcimdas.c
index 8bdb00774f11..5816ef65ed5f 100644
--- a/drivers/comedi/drivers/cb_pcimdas.c
+++ b/drivers/comedi/drivers/cb_pcimdas.c
@@ -364,11 +364,11 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev,
devpriv->BADR3 = pci_resource_start(pcidev, 3);
dev->iobase = pci_resource_start(pcidev, 4);
- dev->pacer = comedi_8254_init(devpriv->BADR3 + PCIMDAS_8254_BASE,
- cb_pcimdas_pacer_clk(dev),
- I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(devpriv->BADR3 + PCIMDAS_8254_BASE,
+ cb_pcimdas_pacer_clk(dev),
+ I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 6);
if (ret)
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index 3f8657fc7ee5..696596944506 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -24,14 +24,17 @@
*
* This module provides the following basic functions:
*
- * comedi_8254_init() / comedi_8254_mm_init()
+ * comedi_8254_io_alloc() / comedi_8254_mm_alloc()
* Initializes this module to access the 8254 registers. The _mm version
- * sets up the module for MMIO register access the other for PIO access.
- * The pointer returned from these functions is normally stored in the
- * comedi_device dev->pacer and will be freed by the comedi core during
- * the driver (*detach). If a driver has multiple 8254 devices, they need
- * to be stored in the drivers private data and freed when the driver is
- * detached.
+ * sets up the module for MMIO register access; the _io version sets it
+ * up for PIO access. These functions return a pointer to a struct
+ * comedi_8254 on success, or an ERR_PTR value on failure. The pointer
+ * returned from these functions is normally stored in the comedi_device
+ * dev->pacer and will be freed by the comedi core during the driver
+ * (*detach). If a driver has multiple 8254 devices, they need to be
+ * stored in the drivers private data and freed when the driver is
+ * detached. If the ERR_PTR value is stored, code should check the
+ * pointer value with !IS_ERR(pointer) before freeing.
*
* NOTE: The counters are reset by setting them to I8254_MODE0 as part of
* this initialization.
@@ -621,14 +624,14 @@ static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
/* sanity check that the iosize is valid */
if (!(iosize == I8254_IO8 || iosize == I8254_IO16 ||
iosize == I8254_IO32))
- return NULL;
+ return ERR_PTR(-EINVAL);
if (!iocb)
- return NULL;
+ return ERR_PTR(-EINVAL);
i8254 = kzalloc(sizeof(*i8254), GFP_KERNEL);
if (!i8254)
- return NULL;
+ return ERR_PTR(-ENOMEM);
i8254->iocb = iocb;
i8254->context = context;
@@ -646,17 +649,19 @@ static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
}
/**
- * comedi_8254_init - allocate and initialize the 8254 device for pio access
+ * comedi_8254_io_alloc - allocate and initialize the 8254 device for pio access
* @iobase: port I/O base address
* @osc_base: base time of the counter in ns
* OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
* @iosize: I/O register size
* @regshift: register gap shift
+ *
+ * Return: A pointer to a struct comedi_8254 or an ERR_PTR value.
*/
-struct comedi_8254 *comedi_8254_init(unsigned long iobase,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift)
+struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
{
comedi_8254_iocb_fn *iocb;
@@ -671,24 +676,26 @@ struct comedi_8254 *comedi_8254_init(unsigned long iobase,
iocb = i8254_io32_cb;
break;
default:
- return NULL;
+ return ERR_PTR(-EINVAL);
}
return __i8254_init(iocb, iobase, osc_base, iosize, regshift);
}
-EXPORT_SYMBOL_GPL(comedi_8254_init);
+EXPORT_SYMBOL_GPL(comedi_8254_io_alloc);
/**
- * comedi_8254_mm_init - allocate and initialize the 8254 device for mmio access
+ * comedi_8254_mm_alloc - allocate and initialize the 8254 device for mmio access
* @mmio: memory mapped I/O base address
* @osc_base: base time of the counter in ns
* OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
* @iosize: I/O register size
* @regshift: register gap shift
+ *
+ * Return: A pointer to a struct comedi_8254 or an ERR_PTR value.
*/
-struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift)
+struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
{
comedi_8254_iocb_fn *iocb;
@@ -703,11 +710,11 @@ struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
iocb = i8254_mmio32_cb;
break;
default:
- return NULL;
+ return ERR_PTR(-EINVAL);
}
return __i8254_init(iocb, (unsigned long)mmio, osc_base, iosize, regshift);
}
-EXPORT_SYMBOL_GPL(comedi_8254_mm_init);
+EXPORT_SYMBOL_GPL(comedi_8254_mm_alloc);
static int __init comedi_8254_module_init(void)
{
diff --git a/drivers/comedi/drivers/das08.c b/drivers/comedi/drivers/das08.c
index f8ab3af2e391..6a3b5411aa90 100644
--- a/drivers/comedi/drivers/das08.c
+++ b/drivers/comedi/drivers/das08.c
@@ -439,10 +439,11 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
/* Counter subdevice (8254) */
s = &dev->subdevices[5];
if (board->i8254_offset) {
- dev->pacer = comedi_8254_init(dev->iobase + board->i8254_offset,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + board->i8254_offset,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
comedi_8254_subdevice_init(s, dev->pacer);
} else {
diff --git a/drivers/comedi/drivers/das16.c b/drivers/comedi/drivers/das16.c
index 728dc02156c8..bfe8811be1b5 100644
--- a/drivers/comedi/drivers/das16.c
+++ b/drivers/comedi/drivers/das16.c
@@ -1067,10 +1067,10 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
osc_base = I8254_OSC_BASE_1MHZ / it->options[3];
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS16_TIMER_BASE_REG,
- osc_base, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16_TIMER_BASE_REG,
+ osc_base, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
das16_alloc_dma(dev, it->options[2]);
diff --git a/drivers/comedi/drivers/das16m1.c b/drivers/comedi/drivers/das16m1.c
index 275effb77746..ff9c5a8897bd 100644
--- a/drivers/comedi/drivers/das16m1.c
+++ b/drivers/comedi/drivers/das16m1.c
@@ -529,15 +529,16 @@ static int das16m1_attach(struct comedi_device *dev,
dev->irq = it->options[1];
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS16M1_8254_IOBASE2,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16M1_8254_IOBASE2,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
- devpriv->counter = comedi_8254_init(dev->iobase + DAS16M1_8254_IOBASE1,
- 0, I8254_IO8, 0);
- if (!devpriv->counter)
- return -ENOMEM;
+ devpriv->counter =
+ comedi_8254_io_alloc(dev->iobase + DAS16M1_8254_IOBASE1,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(devpriv->counter))
+ return PTR_ERR(devpriv->counter);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
@@ -603,7 +604,8 @@ static void das16m1_detach(struct comedi_device *dev)
if (devpriv) {
if (devpriv->extra_iobase)
release_region(devpriv->extra_iobase, DAS16M1_SIZE2);
- kfree(devpriv->counter);
+ if (!IS_ERR(devpriv->counter))
+ kfree(devpriv->counter);
}
comedi_legacy_detach(dev);
}
diff --git a/drivers/comedi/drivers/das1800.c b/drivers/comedi/drivers/das1800.c
index f09608c0f4ff..7117c67aee7e 100644
--- a/drivers/comedi/drivers/das1800.c
+++ b/drivers/comedi/drivers/das1800.c
@@ -1233,10 +1233,10 @@ static int das1800_attach(struct comedi_device *dev,
if (!devpriv->fifo_buf)
return -ENOMEM;
- dev->pacer = comedi_8254_init(dev->iobase + DAS1800_COUNTER,
- I8254_OSC_BASE_5MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS1800_COUNTER,
+ I8254_OSC_BASE_5MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/das6402.c b/drivers/comedi/drivers/das6402.c
index 1af394591e74..68f95330de45 100644
--- a/drivers/comedi/drivers/das6402.c
+++ b/drivers/comedi/drivers/das6402.c
@@ -590,10 +590,10 @@ static int das6402_attach(struct comedi_device *dev,
}
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS6402_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS6402_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/das800.c b/drivers/comedi/drivers/das800.c
index 4ca33f46eaa7..300775523031 100644
--- a/drivers/comedi/drivers/das800.c
+++ b/drivers/comedi/drivers/das800.c
@@ -672,10 +672,10 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->irq = irq;
}
- dev->pacer = comedi_8254_init(dev->iobase + DAS800_8254,
- I8254_OSC_BASE_1MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS800_8254,
+ I8254_OSC_BASE_1MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
diff --git a/drivers/comedi/drivers/me4000.c b/drivers/comedi/drivers/me4000.c
index 9aea02b86ed9..7dd3a0071863 100644
--- a/drivers/comedi/drivers/me4000.c
+++ b/drivers/comedi/drivers/me4000.c
@@ -1209,9 +1209,9 @@ static int me4000_auto_attach(struct comedi_device *dev,
if (!timer_base)
return -ENODEV;
- dev->pacer = comedi_8254_init(timer_base, 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(timer_base, 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
comedi_8254_subdevice_init(s, dev->pacer);
} else {
diff --git a/drivers/comedi/drivers/ni_at_a2150.c b/drivers/comedi/drivers/ni_at_a2150.c
index df8d219e6723..e4e5a0ebd195 100644
--- a/drivers/comedi/drivers/ni_at_a2150.c
+++ b/drivers/comedi/drivers/ni_at_a2150.c
@@ -707,10 +707,10 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* an IRQ and DMA are required to support async commands */
a2150_alloc_irq_and_dma(dev, it);
- dev->pacer = comedi_8254_init(dev->iobase + I8253_BASE_REG,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + I8253_BASE_REG,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
diff --git a/drivers/comedi/drivers/ni_at_ao.c b/drivers/comedi/drivers/ni_at_ao.c
index 9f3147b72aa8..9cf6b4ff6b65 100644
--- a/drivers/comedi/drivers/ni_at_ao.c
+++ b/drivers/comedi/drivers/ni_at_ao.c
@@ -303,10 +303,10 @@ static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!devpriv)
return -ENOMEM;
- dev->pacer = comedi_8254_init(dev->iobase + ATAO_82C53_BASE,
- 0, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + ATAO_82C53_BASE,
+ 0, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index 763249653228..eb8f6431276a 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -1222,24 +1222,24 @@ int labpc_common_attach(struct comedi_device *dev,
}
if (dev->mmio) {
- dev->pacer = comedi_8254_mm_init(dev->mmio + COUNTER_B_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
- devpriv->counter = comedi_8254_mm_init(dev->mmio +
- COUNTER_A_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
+ dev->pacer =
+ comedi_8254_mm_alloc(dev->mmio + COUNTER_B_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ devpriv->counter =
+ comedi_8254_mm_alloc(dev->mmio + COUNTER_A_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
} else {
- dev->pacer = comedi_8254_init(dev->iobase + COUNTER_B_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
- devpriv->counter = comedi_8254_init(dev->iobase +
- COUNTER_A_BASE_REG,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + COUNTER_B_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ devpriv->counter =
+ comedi_8254_io_alloc(dev->iobase + COUNTER_A_BASE_REG,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
}
- if (!dev->pacer || !devpriv->counter)
- return -ENOMEM;
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
+ if (IS_ERR(devpriv->counter))
+ return PTR_ERR(devpriv->counter);
ret = comedi_alloc_subdevices(dev, 5);
if (ret)
@@ -1341,8 +1341,10 @@ void labpc_common_detach(struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
- if (devpriv)
- kfree(devpriv->counter);
+ if (devpriv) {
+ if (!IS_ERR(devpriv->counter))
+ kfree(devpriv->counter);
+ }
}
EXPORT_SYMBOL_GPL(labpc_common_detach);
diff --git a/drivers/comedi/drivers/pcl711.c b/drivers/comedi/drivers/pcl711.c
index 05172c553c8a..0cf3917defe7 100644
--- a/drivers/comedi/drivers/pcl711.c
+++ b/drivers/comedi/drivers/pcl711.c
@@ -429,10 +429,10 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->irq = it->options[1];
}
- dev->pacer = comedi_8254_init(dev->iobase + PCL711_TIMER_BASE,
- I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL711_TIMER_BASE,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/pcl812.c b/drivers/comedi/drivers/pcl812.c
index 70dbc129fcf5..0df639c6a595 100644
--- a/drivers/comedi/drivers/pcl812.c
+++ b/drivers/comedi/drivers/pcl812.c
@@ -1143,11 +1143,11 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return ret;
if (board->irq_bits) {
- dev->pacer = comedi_8254_init(dev->iobase + PCL812_TIMER_BASE,
- I8254_OSC_BASE_2MHZ,
- I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer =
+ comedi_8254_io_alloc(dev->iobase + PCL812_TIMER_BASE,
+ I8254_OSC_BASE_2MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
if ((1 << it->options[1]) & board->irq_bits) {
ret = request_irq(it->options[1], pcl812_interrupt, 0,
diff --git a/drivers/comedi/drivers/pcl816.c b/drivers/comedi/drivers/pcl816.c
index a5e5320be648..28d1a88c50f6 100644
--- a/drivers/comedi/drivers/pcl816.c
+++ b/drivers/comedi/drivers/pcl816.c
@@ -615,10 +615,10 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* an IRQ and DMA are required to support async commands */
pcl816_alloc_irq_and_dma(dev, it);
- dev->pacer = comedi_8254_init(dev->iobase + PCL816_TIMER_BASE,
- I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL816_TIMER_BASE,
+ I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/comedi/drivers/pcl818.c b/drivers/comedi/drivers/pcl818.c
index 29e503de8267..4127adcfb229 100644
--- a/drivers/comedi/drivers/pcl818.c
+++ b/drivers/comedi/drivers/pcl818.c
@@ -1015,10 +1015,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
else
osc_base = I8254_OSC_BASE_1MHZ;
- dev->pacer = comedi_8254_init(dev->iobase + PCL818_TIMER_BASE,
- osc_base, I8254_IO8, 0);
- if (!dev->pacer)
- return -ENOMEM;
+ dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL818_TIMER_BASE,
+ osc_base, I8254_IO8, 0);
+ if (IS_ERR(dev->pacer))
+ return PTR_ERR(dev->pacer);
/* max sampling speed */
devpriv->ns_min = board->ns_min;
diff --git a/drivers/comedi/drivers/rtd520.c b/drivers/comedi/drivers/rtd520.c
index 7e0ec1a2a2ca..44bb0decd7a4 100644
--- a/drivers/comedi/drivers/rtd520.c
+++ b/drivers/comedi/drivers/rtd520.c
@@ -1289,9 +1289,9 @@ static int rtd_auto_attach(struct comedi_device *dev,
/* 8254 Timer/Counter subdevice */
s = &dev->subdevices[3];
- dev->pacer = comedi_8254_mm_init(dev->mmio + LAS0_8254_TIMER_BASE,
- RTD_CLOCK_BASE, I8254_IO8, 2);
- if (!dev->pacer)
+ dev->pacer = comedi_8254_mm_alloc(dev->mmio + LAS0_8254_TIMER_BASE,
+ RTD_CLOCK_BASE, I8254_IO8, 2);
+ if (IS_ERR(dev->pacer))
return -ENOMEM;
comedi_8254_subdevice_init(s, dev->pacer);
diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h
index 18d12321c87d..393ccb301028 100644
--- a/include/linux/comedi/comedi_8254.h
+++ b/include/linux/comedi/comedi_8254.h
@@ -136,13 +136,13 @@ void comedi_8254_set_busy(struct comedi_8254 *i8254,
void comedi_8254_subdevice_init(struct comedi_subdevice *s,
struct comedi_8254 *i8254);
-struct comedi_8254 *comedi_8254_init(unsigned long iobase,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift);
-struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
- unsigned int osc_base,
- unsigned int iosize,
- unsigned int regshift);
+struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift);
+struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift);
#endif /* _COMEDI_8254_H */
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 04/13] comedi: comedi_8254: Conditionally remove I/O port support
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (2 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init() Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O Ian Abbott
` (9 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
The comedi_8254 module supports both port I/O and memory-mapped I/O.
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends) will only be declared if the `HAS_IOPORT` configuration option
is enabled.
Conditionally compile the parts of the module that use port I/O so they
are compiled if and only if the `CONFIG_HAS_IOPORT` macro is defined, so
that it can still be built if the port I/O functions have not been
declared. If `CONFIG_HAS_IOPORT` is undefined, replace the GPL-exported
`comedi_8254_io_alloc()` function with a dummy static inline version
that just returns `ERR_PTR(-ENXIO)`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: Add missing `---` divider before patch changelog.
---
drivers/comedi/drivers/comedi_8254.c | 8 ++++++++
include/linux/comedi/comedi_8254.h | 13 +++++++++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index 696596944506..6beca2a6d66e 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -122,6 +122,8 @@
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_8254.h>
+#ifdef CONFIG_HAS_IOPORT
+
static unsigned int i8254_io8_cb(struct comedi_8254 *i8254, int dir,
unsigned int reg, unsigned int val)
{
@@ -164,6 +166,8 @@ static unsigned int i8254_io32_cb(struct comedi_8254 *i8254, int dir,
}
}
+#endif /* CONFIG_HAS_IOPORT */
+
static unsigned int i8254_mmio8_cb(struct comedi_8254 *i8254, int dir,
unsigned int reg, unsigned int val)
{
@@ -648,6 +652,8 @@ static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb,
return i8254;
}
+#ifdef CONFIG_HAS_IOPORT
+
/**
* comedi_8254_io_alloc - allocate and initialize the 8254 device for pio access
* @iobase: port I/O base address
@@ -682,6 +688,8 @@ struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
}
EXPORT_SYMBOL_GPL(comedi_8254_io_alloc);
+#endif /* CONFIG_HAS_IOPORT */
+
/**
* comedi_8254_mm_alloc - allocate and initialize the 8254 device for mmio access
* @mmio: memory mapped I/O base address
diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h
index 393ccb301028..d527f04400df 100644
--- a/include/linux/comedi/comedi_8254.h
+++ b/include/linux/comedi/comedi_8254.h
@@ -12,6 +12,8 @@
#define _COMEDI_8254_H
#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
struct comedi_device;
struct comedi_insn;
@@ -136,10 +138,21 @@ void comedi_8254_set_busy(struct comedi_8254 *i8254,
void comedi_8254_subdevice_init(struct comedi_subdevice *s,
struct comedi_8254 *i8254);
+#ifdef CONFIG_HAS_IOPORT
struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
unsigned int osc_base,
unsigned int iosize,
unsigned int regshift);
+#else
+static inline struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
+{
+ return ERR_PTR(-ENXIO);
+}
+#endif
+
struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio,
unsigned int osc_base,
unsigned int iosize,
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (3 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 06/13] comedi: comedi_8255: Rework subdevice initialization functions Ian Abbott
` (8 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The 8255_pci module supports PCI digital I/O devices from various
manufacturers that consist of one or more 8255 Programmable Peripheral
Interface chips (or equivalent hardware) to provide their digital I/O
ports. Some of the devices use port I/O and some only use memory-mapped
I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined. Change
`pci_8255_auto_attach()` to return an error if the device actually
requires port I/O (based on the PCI BAR resource flags) but the
`HAS_IOPORT` configuration is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT`.
v3: N/A.
---
drivers/comedi/drivers/8255_pci.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/drivers/8255_pci.c b/drivers/comedi/drivers/8255_pci.c
index 0fec048e3a53..9ad52e9f5427 100644
--- a/drivers/comedi/drivers/8255_pci.c
+++ b/drivers/comedi/drivers/8255_pci.c
@@ -57,6 +57,7 @@
#include <linux/comedi/comedi_8255.h>
enum pci_8255_boardid {
+#ifdef CONFIG_HAS_IOPORT
BOARD_ADLINK_PCI7224,
BOARD_ADLINK_PCI7248,
BOARD_ADLINK_PCI7296,
@@ -65,6 +66,7 @@ enum pci_8255_boardid {
BOARD_CB_PCIDIO48H_OLD,
BOARD_CB_PCIDIO48H_NEW,
BOARD_CB_PCIDIO96H,
+#endif /* CONFIG_HAS_IOPORT */
BOARD_NI_PCIDIO96,
BOARD_NI_PCIDIO96B,
BOARD_NI_PXI6508,
@@ -82,6 +84,7 @@ struct pci_8255_boardinfo {
};
static const struct pci_8255_boardinfo pci_8255_boards[] = {
+#ifdef CONFIG_HAS_IOPORT
[BOARD_ADLINK_PCI7224] = {
.name = "adl_pci-7224",
.dio_badr = 2,
@@ -122,6 +125,7 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = {
.dio_badr = 2,
.n_8255 = 4,
},
+#endif /* CONFIG_HAS_IOPORT */
[BOARD_NI_PCIDIO96] = {
.name = "ni_pci-dio-96",
.dio_badr = 1,
@@ -219,8 +223,11 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
dev->mmio = pci_ioremap_bar(pcidev, board->dio_badr);
if (!dev->mmio)
return -ENOMEM;
- } else {
+ } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) {
dev->iobase = pci_resource_start(pcidev, board->dio_badr);
+ } else {
+ dev_err(dev->class_dev, "error! need I/O port support\n");
+ return -ENXIO;
}
/*
@@ -259,6 +266,7 @@ static int pci_8255_pci_probe(struct pci_dev *dev,
}
static const struct pci_device_id pci_8255_pci_table[] = {
+#ifdef CONFIG_HAS_IOPORT
{ PCI_VDEVICE(ADLINK, 0x7224), BOARD_ADLINK_PCI7224 },
{ PCI_VDEVICE(ADLINK, 0x7248), BOARD_ADLINK_PCI7248 },
{ PCI_VDEVICE(ADLINK, 0x7296), BOARD_ADLINK_PCI7296 },
@@ -269,6 +277,7 @@ static const struct pci_device_id pci_8255_pci_table[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CB, 0x000b, PCI_VENDOR_ID_CB, 0x000b),
.driver_data = BOARD_CB_PCIDIO48H_NEW },
{ PCI_VDEVICE(CB, 0x0017), BOARD_CB_PCIDIO96H },
+#endif /* CONFIG_HAS_IOPORT */
{ PCI_VDEVICE(NI, 0x0160), BOARD_NI_PCIDIO96 },
{ PCI_VDEVICE(NI, 0x1630), BOARD_NI_PCIDIO96B },
{ PCI_VDEVICE(NI, 0x13c0), BOARD_NI_PXI6508 },
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 06/13] comedi: comedi_8255: Rework subdevice initialization functions
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (4 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 07/13] comedi: comedi_8255: Conditionally remove I/O port support Ian Abbott
` (7 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
Comedi drivers can initialize an 8255 subdevice in I/O space by calling
`subdev_8255_init()`, or in memory-mapped I/O space by calling
`subdev_8255_mm_init()`, or by supplying a call-back function pointer
and context to either of those functions. Change it so that a new
function `subdev_8255_cb_init()` shall be called instead when supplying
a callback function and context, and remove the call-back function
parameter from `subdev_8255_init()` and `subdev_8255_mm_init()`.
Also rename `subdev_8255_init()` to `subdev_8255_io_init()`. The
parameters are changing, so might as well rename it at the same time.
Also rename the `regbase` member of `struct subdev_8255_private` to
`context` since this holds the context for the call-back function call.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: Add missing `---` divider before patch changelog.
---
drivers/comedi/drivers/8255.c | 2 +-
drivers/comedi/drivers/8255_pci.c | 4 +-
drivers/comedi/drivers/adv_pci_dio.c | 4 +-
drivers/comedi/drivers/aio_aio12_8.c | 2 +-
drivers/comedi/drivers/amplc_pc236_common.c | 2 +-
drivers/comedi/drivers/amplc_pci230.c | 2 +-
drivers/comedi/drivers/cb_pcidas.c | 2 +-
drivers/comedi/drivers/cb_pcidas64.c | 7 +-
drivers/comedi/drivers/cb_pcidda.c | 2 +-
drivers/comedi/drivers/cb_pcimdas.c | 2 +-
drivers/comedi/drivers/cb_pcimdda.c | 2 +-
drivers/comedi/drivers/comedi_8255.c | 115 +++++++++-----------
drivers/comedi/drivers/daqboard2000.c | 4 +-
drivers/comedi/drivers/das08.c | 2 +-
drivers/comedi/drivers/das16.c | 2 +-
drivers/comedi/drivers/das16m1.c | 2 +-
drivers/comedi/drivers/dmm32at.c | 3 +-
drivers/comedi/drivers/ni_atmio16d.c | 2 +-
drivers/comedi/drivers/ni_daq_dio24.c | 2 +-
drivers/comedi/drivers/ni_labpc_common.c | 4 +-
drivers/comedi/drivers/ni_mio_common.c | 4 +-
drivers/comedi/drivers/pcl724.c | 6 +-
drivers/comedi/drivers/pcm3724.c | 2 +-
include/linux/comedi/comedi_8255.h | 13 ++-
24 files changed, 92 insertions(+), 100 deletions(-)
diff --git a/drivers/comedi/drivers/8255.c b/drivers/comedi/drivers/8255.c
index ced8ea09d4fa..f45f7bd1c61a 100644
--- a/drivers/comedi/drivers/8255.c
+++ b/drivers/comedi/drivers/8255.c
@@ -80,7 +80,7 @@ static int dev_8255_attach(struct comedi_device *dev,
if (ret) {
s->type = COMEDI_SUBD_UNUSED;
} else {
- ret = subdev_8255_init(dev, s, NULL, iobase);
+ ret = subdev_8255_io_init(dev, s, iobase);
if (ret) {
/*
* Release the I/O port region here, as the
diff --git a/drivers/comedi/drivers/8255_pci.c b/drivers/comedi/drivers/8255_pci.c
index 9ad52e9f5427..8498cabe4d91 100644
--- a/drivers/comedi/drivers/8255_pci.c
+++ b/drivers/comedi/drivers/8255_pci.c
@@ -242,9 +242,9 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
for (i = 0; i < board->n_8255; i++) {
s = &dev->subdevices[i];
if (dev->mmio)
- ret = subdev_8255_mm_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_mm_init(dev, s, i * I8255_SIZE);
else
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/adv_pci_dio.c b/drivers/comedi/drivers/adv_pci_dio.c
index 0319d8c7ee47..ca8054504760 100644
--- a/drivers/comedi/drivers/adv_pci_dio.c
+++ b/drivers/comedi/drivers/adv_pci_dio.c
@@ -642,8 +642,8 @@ static int pci_dio_auto_attach(struct comedi_device *dev,
for (j = 0; j < d->chans; j++) {
s = &dev->subdevices[subdev++];
- ret = subdev_8255_init(dev, s, NULL,
- d->addr + j * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s,
+ d->addr + j * I8255_SIZE);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/aio_aio12_8.c b/drivers/comedi/drivers/aio_aio12_8.c
index f9d40fa3d3a9..227a86a3a760 100644
--- a/drivers/comedi/drivers/aio_aio12_8.c
+++ b/drivers/comedi/drivers/aio_aio12_8.c
@@ -247,7 +247,7 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
/* Digital I/O subdevice (8255) */
s = &dev->subdevices[2];
- ret = subdev_8255_init(dev, s, NULL, AIO12_8_8255_BASE_REG);
+ ret = subdev_8255_io_init(dev, s, AIO12_8_8255_BASE_REG);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/amplc_pc236_common.c b/drivers/comedi/drivers/amplc_pc236_common.c
index 9f4f89b1ef23..326ca72c24ec 100644
--- a/drivers/comedi/drivers/amplc_pc236_common.c
+++ b/drivers/comedi/drivers/amplc_pc236_common.c
@@ -147,7 +147,7 @@ int amplc_pc236_common_attach(struct comedi_device *dev, unsigned long iobase,
s = &dev->subdevices[0];
/* digital i/o subdevice (8255) */
- ret = subdev_8255_init(dev, s, NULL, 0x00);
+ ret = subdev_8255_io_init(dev, s, 0x00);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/amplc_pci230.c b/drivers/comedi/drivers/amplc_pci230.c
index 783da73877b9..c74209c2e83a 100644
--- a/drivers/comedi/drivers/amplc_pci230.c
+++ b/drivers/comedi/drivers/amplc_pci230.c
@@ -2529,7 +2529,7 @@ static int pci230_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[2];
/* digital i/o subdevice */
if (board->have_dio) {
- rc = subdev_8255_init(dev, s, NULL, PCI230_PPI_X_BASE);
+ rc = subdev_8255_io_init(dev, s, PCI230_PPI_X_BASE);
if (rc)
return rc;
} else {
diff --git a/drivers/comedi/drivers/cb_pcidas.c b/drivers/comedi/drivers/cb_pcidas.c
index 7a6cd681e932..8bb9b0623869 100644
--- a/drivers/comedi/drivers/cb_pcidas.c
+++ b/drivers/comedi/drivers/cb_pcidas.c
@@ -1352,7 +1352,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev,
/* 8255 */
s = &dev->subdevices[2];
- ret = subdev_8255_init(dev, s, NULL, PCIDAS_8255_BASE);
+ ret = subdev_8255_io_init(dev, s, PCIDAS_8255_BASE);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/cb_pcidas64.c b/drivers/comedi/drivers/cb_pcidas64.c
index ca6038a25f26..ff19fc3859e4 100644
--- a/drivers/comedi/drivers/cb_pcidas64.c
+++ b/drivers/comedi/drivers/cb_pcidas64.c
@@ -3877,11 +3877,10 @@ static int setup_subdevices(struct comedi_device *dev)
s = &dev->subdevices[4];
if (board->has_8255) {
if (board->layout == LAYOUT_4020) {
- ret = subdev_8255_init(dev, s, dio_callback_4020,
- I8255_4020_REG);
+ ret = subdev_8255_cb_init(dev, s, dio_callback_4020,
+ I8255_4020_REG);
} else {
- ret = subdev_8255_mm_init(dev, s, NULL,
- DIO_8255_OFFSET);
+ ret = subdev_8255_mm_init(dev, s, DIO_8255_OFFSET);
}
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/cb_pcidda.c b/drivers/comedi/drivers/cb_pcidda.c
index c52204a6bda4..c353d0f87da9 100644
--- a/drivers/comedi/drivers/cb_pcidda.c
+++ b/drivers/comedi/drivers/cb_pcidda.c
@@ -365,7 +365,7 @@ static int cb_pcidda_auto_attach(struct comedi_device *dev,
/* two 8255 digital io subdevices */
for (i = 0; i < 2; i++) {
s = &dev->subdevices[1 + i];
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/cb_pcimdas.c b/drivers/comedi/drivers/cb_pcimdas.c
index 5816ef65ed5f..641c30df392e 100644
--- a/drivers/comedi/drivers/cb_pcimdas.c
+++ b/drivers/comedi/drivers/cb_pcimdas.c
@@ -405,7 +405,7 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev,
/* Digital I/O subdevice */
s = &dev->subdevices[2];
- ret = subdev_8255_init(dev, s, NULL, PCIMDAS_8255_BASE);
+ ret = subdev_8255_io_init(dev, s, PCIMDAS_8255_BASE);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/cb_pcimdda.c b/drivers/comedi/drivers/cb_pcimdda.c
index bf8093a10315..541b5742bb1b 100644
--- a/drivers/comedi/drivers/cb_pcimdda.c
+++ b/drivers/comedi/drivers/cb_pcimdda.c
@@ -154,7 +154,7 @@ static int cb_pcimdda_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[1];
/* digital i/o subdevice */
- return subdev_8255_init(dev, s, NULL, PCIMDDA_8255_BASE_REG);
+ return subdev_8255_io_init(dev, s, PCIMDDA_8255_BASE_REG);
}
static struct comedi_driver cb_pcimdda_driver = {
diff --git a/drivers/comedi/drivers/comedi_8255.c b/drivers/comedi/drivers/comedi_8255.c
index 5562b9cd0a17..28fd9d8c95cc 100644
--- a/drivers/comedi/drivers/comedi_8255.c
+++ b/drivers/comedi/drivers/comedi_8255.c
@@ -33,9 +33,9 @@
#include <linux/comedi/comedi_8255.h>
struct subdev_8255_private {
- unsigned long regbase;
+ unsigned long context;
int (*io)(struct comedi_device *dev, int dir, int port, int data,
- unsigned long regbase);
+ unsigned long context);
};
static int subdev_8255_io(struct comedi_device *dev,
@@ -64,7 +64,7 @@ static int subdev_8255_insn(struct comedi_device *dev,
unsigned int *data)
{
struct subdev_8255_private *spriv = s->private;
- unsigned long regbase = spriv->regbase;
+ unsigned long context = spriv->context;
unsigned int mask;
unsigned int v;
@@ -72,18 +72,18 @@ static int subdev_8255_insn(struct comedi_device *dev,
if (mask) {
if (mask & 0xff)
spriv->io(dev, 1, I8255_DATA_A_REG,
- s->state & 0xff, regbase);
+ s->state & 0xff, context);
if (mask & 0xff00)
spriv->io(dev, 1, I8255_DATA_B_REG,
- (s->state >> 8) & 0xff, regbase);
+ (s->state >> 8) & 0xff, context);
if (mask & 0xff0000)
spriv->io(dev, 1, I8255_DATA_C_REG,
- (s->state >> 16) & 0xff, regbase);
+ (s->state >> 16) & 0xff, context);
}
- v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, regbase);
- v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, regbase) << 8);
- v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, regbase) << 16);
+ v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, context);
+ v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, context) << 8);
+ v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, context) << 16);
data[1] = v;
@@ -94,7 +94,7 @@ static void subdev_8255_do_config(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
- unsigned long regbase = spriv->regbase;
+ unsigned long context = spriv->context;
int config;
config = I8255_CTRL_CW;
@@ -108,7 +108,7 @@ static void subdev_8255_do_config(struct comedi_device *dev,
if (!(s->io_bits & 0xf00000))
config |= I8255_CTRL_C_HI_IO;
- spriv->io(dev, 1, I8255_CTRL_REG, config, regbase);
+ spriv->io(dev, 1, I8255_CTRL_REG, config, context);
}
static int subdev_8255_insn_config(struct comedi_device *dev,
@@ -142,23 +142,19 @@ static int __subdev_8255_init(struct comedi_device *dev,
struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev,
int dir, int port, int data,
- unsigned long regbase),
- unsigned long regbase,
- bool is_mmio)
+ unsigned long context),
+ unsigned long context)
{
struct subdev_8255_private *spriv;
+ if (!io)
+ return -EINVAL;
+
spriv = comedi_alloc_spriv(s, sizeof(*spriv));
if (!spriv)
return -ENOMEM;
- if (io)
- spriv->io = io;
- else if (is_mmio)
- spriv->io = subdev_8255_mmio;
- else
- spriv->io = subdev_8255_io;
- spriv->regbase = regbase;
+ spriv->context = context;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
@@ -174,88 +170,83 @@ static int __subdev_8255_init(struct comedi_device *dev,
}
/**
- * subdev_8255_init - initialize DIO subdevice for driving I/O mapped 8255
+ * subdev_8255_io_init - initialize DIO subdevice for driving I/O mapped 8255
* @dev: comedi device owning subdevice
* @s: comedi subdevice to initialize
- * @io: (optional) register I/O call-back function
- * @regbase: offset of 8255 registers from dev->iobase, or call-back context
+ * @regbase: offset of 8255 registers from dev->iobase
*
* Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
*
- * If the optional I/O call-back function is provided, its prototype is of
- * the following form:
- *
- * int my_8255_callback(struct comedi_device *dev, int dir, int port,
- * int data, unsigned long regbase);
- *
- * where 'dev', and 'regbase' match the values passed to this function,
- * 'port' is the 8255 port number 0 to 3 (including the control port), 'dir'
- * is the direction (0 for read, 1 for write) and 'data' is the value to be
- * written. It should return 0 if writing or the value read if reading.
- *
- * If the optional I/O call-back function is not provided, an internal
- * call-back function is used which uses consecutive I/O port addresses
- * starting at dev->iobase + regbase.
- *
* Return: -ENOMEM if failed to allocate memory, zero on success.
*/
-int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
- int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
+int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned long regbase)
{
- return __subdev_8255_init(dev, s, io, regbase, false);
+ return __subdev_8255_init(dev, s, subdev_8255_io, regbase);
}
-EXPORT_SYMBOL_GPL(subdev_8255_init);
+EXPORT_SYMBOL_GPL(subdev_8255_io_init);
/**
* subdev_8255_mm_init - initialize DIO subdevice for driving mmio-mapped 8255
* @dev: comedi device owning subdevice
* @s: comedi subdevice to initialize
- * @io: (optional) register I/O call-back function
- * @regbase: offset of 8255 registers from dev->mmio, or call-back context
+ * @regbase: offset of 8255 registers from dev->mmio
*
* Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
*
- * If the optional I/O call-back function is provided, its prototype is of
- * the following form:
+ * Return: -ENOMEM if failed to allocate memory, zero on success.
+ */
+int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
+ unsigned long regbase)
+{
+ return __subdev_8255_init(dev, s, subdev_8255_mmio, regbase);
+}
+EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
+
+/**
+ * subdev_8255_cb_init - initialize DIO subdevice for driving callback-mapped 8255
+ * @dev: comedi device owning subdevice
+ * @s: comedi subdevice to initialize
+ * @io: register I/O call-back function
+ * @context: call-back context
+ *
+ * Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
+ *
+ * The prototype of the I/O call-back function is of the following form:
*
* int my_8255_callback(struct comedi_device *dev, int dir, int port,
- * int data, unsigned long regbase);
+ * int data, unsigned long context);
*
- * where 'dev', and 'regbase' match the values passed to this function,
+ * where 'dev', and 'context' match the values passed to this function,
* 'port' is the 8255 port number 0 to 3 (including the control port), 'dir'
* is the direction (0 for read, 1 for write) and 'data' is the value to be
* written. It should return 0 if writing or the value read if reading.
*
- * If the optional I/O call-back function is not provided, an internal
- * call-back function is used which uses consecutive MMIO virtual addresses
- * starting at dev->mmio + regbase.
*
* Return: -ENOMEM if failed to allocate memory, zero on success.
*/
-int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
+int subdev_8255_cb_init(struct comedi_device *dev, struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
- unsigned long regbase)
+ int data, unsigned long context),
+ unsigned long context)
{
- return __subdev_8255_init(dev, s, io, regbase, true);
+ return __subdev_8255_init(dev, s, io, context);
}
-EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
+EXPORT_SYMBOL_GPL(subdev_8255_cb_init);
/**
* subdev_8255_regbase - get offset of 8255 registers or call-back context
* @s: comedi subdevice
*
- * Returns the 'regbase' parameter that was previously passed to
- * subdev_8255_init() or subdev_8255_mm_init() to set up the subdevice.
- * Only valid if the subdevice was set up successfully.
+ * Returns the 'regbase' or 'context' parameter that was previously passed to
+ * subdev_8255_io_init(), subdev_8255_mm_init(), or subdev_8255_cb_init() to
+ * set up the subdevice. Only valid if the subdevice was set up successfully.
*/
unsigned long subdev_8255_regbase(struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
- return spriv->regbase;
+ return spriv->context;
}
EXPORT_SYMBOL_GPL(subdev_8255_regbase);
diff --git a/drivers/comedi/drivers/daqboard2000.c b/drivers/comedi/drivers/daqboard2000.c
index c0a4e1b06fb3..897bf46b95ee 100644
--- a/drivers/comedi/drivers/daqboard2000.c
+++ b/drivers/comedi/drivers/daqboard2000.c
@@ -738,8 +738,8 @@ static int db2k_auto_attach(struct comedi_device *dev, unsigned long context)
return result;
s = &dev->subdevices[2];
- return subdev_8255_init(dev, s, db2k_8255_cb,
- DB2K_REG_DIO_P2_EXP_IO_8_BIT);
+ return subdev_8255_cb_init(dev, s, db2k_8255_cb,
+ DB2K_REG_DIO_P2_EXP_IO_8_BIT);
}
static void db2k_detach(struct comedi_device *dev)
diff --git a/drivers/comedi/drivers/das08.c b/drivers/comedi/drivers/das08.c
index 6a3b5411aa90..5d5b9174f88a 100644
--- a/drivers/comedi/drivers/das08.c
+++ b/drivers/comedi/drivers/das08.c
@@ -429,7 +429,7 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
s = &dev->subdevices[4];
/* 8255 */
if (board->i8255_offset != 0) {
- ret = subdev_8255_init(dev, s, NULL, board->i8255_offset);
+ ret = subdev_8255_io_init(dev, s, board->i8255_offset);
if (ret)
return ret;
} else {
diff --git a/drivers/comedi/drivers/das16.c b/drivers/comedi/drivers/das16.c
index bfe8811be1b5..4ed56a02150e 100644
--- a/drivers/comedi/drivers/das16.c
+++ b/drivers/comedi/drivers/das16.c
@@ -1145,7 +1145,7 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* 8255 Digital I/O subdevice */
if (board->has_8255) {
s = &dev->subdevices[4];
- ret = subdev_8255_init(dev, s, NULL, board->i8255_offset);
+ ret = subdev_8255_io_init(dev, s, board->i8255_offset);
if (ret)
return ret;
}
diff --git a/drivers/comedi/drivers/das16m1.c b/drivers/comedi/drivers/das16m1.c
index ff9c5a8897bd..b8ea737ad3d1 100644
--- a/drivers/comedi/drivers/das16m1.c
+++ b/drivers/comedi/drivers/das16m1.c
@@ -583,7 +583,7 @@ static int das16m1_attach(struct comedi_device *dev,
/* Digital I/O subdevice (8255) */
s = &dev->subdevices[3];
- ret = subdev_8255_init(dev, s, NULL, DAS16M1_8255_IOBASE);
+ ret = subdev_8255_io_init(dev, s, DAS16M1_8255_IOBASE);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/dmm32at.c b/drivers/comedi/drivers/dmm32at.c
index fe023c722aa3..644e3b643c79 100644
--- a/drivers/comedi/drivers/dmm32at.c
+++ b/drivers/comedi/drivers/dmm32at.c
@@ -599,7 +599,8 @@ static int dmm32at_attach(struct comedi_device *dev,
/* Digital I/O subdevice */
s = &dev->subdevices[2];
- return subdev_8255_init(dev, s, dmm32at_8255_io, DMM32AT_8255_IOBASE);
+ return subdev_8255_cb_init(dev, s, dmm32at_8255_io,
+ DMM32AT_8255_IOBASE);
}
static struct comedi_driver dmm32at_driver = {
diff --git a/drivers/comedi/drivers/ni_atmio16d.c b/drivers/comedi/drivers/ni_atmio16d.c
index 9fa902529a8e..e5e7cc423c87 100644
--- a/drivers/comedi/drivers/ni_atmio16d.c
+++ b/drivers/comedi/drivers/ni_atmio16d.c
@@ -677,7 +677,7 @@ static int atmio16d_attach(struct comedi_device *dev,
/* 8255 subdevice */
s = &dev->subdevices[3];
if (board->has_8255) {
- ret = subdev_8255_init(dev, s, NULL, 0x00);
+ ret = subdev_8255_io_init(dev, s, 0x00);
if (ret)
return ret;
} else {
diff --git a/drivers/comedi/drivers/ni_daq_dio24.c b/drivers/comedi/drivers/ni_daq_dio24.c
index 487733111023..9419caf02edc 100644
--- a/drivers/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/comedi/drivers/ni_daq_dio24.c
@@ -45,7 +45,7 @@ static int dio24_auto_attach(struct comedi_device *dev,
/* 8255 dio */
s = &dev->subdevices[0];
- return subdev_8255_init(dev, s, NULL, 0x00);
+ return subdev_8255_io_init(dev, s, 0x00);
}
static struct comedi_driver driver_dio24 = {
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index eb8f6431276a..5d5c1d0e9cb6 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -1287,9 +1287,9 @@ int labpc_common_attach(struct comedi_device *dev,
/* 8255 dio */
s = &dev->subdevices[2];
if (dev->mmio)
- ret = subdev_8255_mm_init(dev, s, NULL, DIO_BASE_REG);
+ ret = subdev_8255_mm_init(dev, s, DIO_BASE_REG);
else
- ret = subdev_8255_init(dev, s, NULL, DIO_BASE_REG);
+ ret = subdev_8255_io_init(dev, s, DIO_BASE_REG);
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c
index d39998565808..638be08b43e4 100644
--- a/drivers/comedi/drivers/ni_mio_common.c
+++ b/drivers/comedi/drivers/ni_mio_common.c
@@ -6137,8 +6137,8 @@ static int ni_E_init(struct comedi_device *dev,
/* 8255 device */
s = &dev->subdevices[NI_8255_DIO_SUBDEV];
if (board->has_8255) {
- ret = subdev_8255_init(dev, s, ni_8255_callback,
- NI_E_8255_BASE);
+ ret = subdev_8255_cb_init(dev, s, ni_8255_callback,
+ NI_E_8255_BASE);
if (ret)
return ret;
} else {
diff --git a/drivers/comedi/drivers/pcl724.c b/drivers/comedi/drivers/pcl724.c
index 948a0576c9ef..00474710b81f 100644
--- a/drivers/comedi/drivers/pcl724.c
+++ b/drivers/comedi/drivers/pcl724.c
@@ -124,10 +124,10 @@ static int pcl724_attach(struct comedi_device *dev,
s = &dev->subdevices[i];
if (board->is_pet48) {
iobase = dev->iobase + (i * 0x1000);
- ret = subdev_8255_init(dev, s, pcl724_8255mapped_io,
- iobase);
+ ret = subdev_8255_cb_init(dev, s, pcl724_8255mapped_io,
+ iobase);
} else {
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
}
if (ret)
return ret;
diff --git a/drivers/comedi/drivers/pcm3724.c b/drivers/comedi/drivers/pcm3724.c
index ca8bef54dacc..fb41de3baef8 100644
--- a/drivers/comedi/drivers/pcm3724.c
+++ b/drivers/comedi/drivers/pcm3724.c
@@ -204,7 +204,7 @@ static int pcm3724_attach(struct comedi_device *dev,
for (i = 0; i < dev->n_subdevices; i++) {
s = &dev->subdevices[i];
- ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
+ ret = subdev_8255_io_init(dev, s, i * I8255_SIZE);
if (ret)
return ret;
s->insn_config = subdev_3724_insn_config;
diff --git a/include/linux/comedi/comedi_8255.h b/include/linux/comedi/comedi_8255.h
index b2a5bc6b3a49..b396fcfbf8b0 100644
--- a/include/linux/comedi/comedi_8255.h
+++ b/include/linux/comedi/comedi_8255.h
@@ -27,16 +27,17 @@
struct comedi_device;
struct comedi_subdevice;
-int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
- int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
- unsigned long regbase);
+int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
+ unsigned long regbase);
int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
- int (*io)(struct comedi_device *dev, int dir, int port,
- int data, unsigned long regbase),
unsigned long regbase);
+int subdev_8255_cb_init(struct comedi_device *dev, struct comedi_subdevice *s,
+ int (*io)(struct comedi_device *dev, int dir, int port,
+ int data, unsigned long context),
+ unsigned long context);
+
unsigned long subdev_8255_regbase(struct comedi_subdevice *s);
#endif
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 07/13] comedi: comedi_8255: Conditionally remove I/O port support
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (5 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 06/13] comedi: comedi_8255: Rework subdevice initialization functions Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 08/13] comedi: ni_labpc_common: " Ian Abbott
` (6 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The comedi_8255 module supports both port I/O and memory-mapped I/O.
Conditionally compile the parts of the module that use port I/O if and
only if the `CONFIG_HAS_IOPORT` macro is defined so that it can still be
built if the port I/O functions have not been declared. If the
`CONFIG_HAS_IOPORT` macro is undefined, replace the GPL-exported
`subdev_8255_io_init()` function with a dummy static inline version that
just returns `-ENXIO`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT` in commit
description.
v3: N/A.
---
drivers/comedi/drivers/comedi_8255.c | 8 ++++++++
include/linux/comedi/comedi_8255.h | 11 +++++++++++
2 files changed, 19 insertions(+)
diff --git a/drivers/comedi/drivers/comedi_8255.c b/drivers/comedi/drivers/comedi_8255.c
index 28fd9d8c95cc..e4974b508328 100644
--- a/drivers/comedi/drivers/comedi_8255.c
+++ b/drivers/comedi/drivers/comedi_8255.c
@@ -38,6 +38,8 @@ struct subdev_8255_private {
unsigned long context);
};
+#ifdef CONFIG_HAS_IOPORT
+
static int subdev_8255_io(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
@@ -48,6 +50,8 @@ static int subdev_8255_io(struct comedi_device *dev,
return inb(dev->iobase + regbase + port);
}
+#endif /* CONFIG_HAS_IOPORT */
+
static int subdev_8255_mmio(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
@@ -169,6 +173,8 @@ static int __subdev_8255_init(struct comedi_device *dev,
return 0;
}
+#ifdef CONFIG_HAS_IOPORT
+
/**
* subdev_8255_io_init - initialize DIO subdevice for driving I/O mapped 8255
* @dev: comedi device owning subdevice
@@ -186,6 +192,8 @@ int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
}
EXPORT_SYMBOL_GPL(subdev_8255_io_init);
+#endif /* CONFIG_HAS_IOPORT */
+
/**
* subdev_8255_mm_init - initialize DIO subdevice for driving mmio-mapped 8255
* @dev: comedi device owning subdevice
diff --git a/include/linux/comedi/comedi_8255.h b/include/linux/comedi/comedi_8255.h
index b396fcfbf8b0..d24a69da389b 100644
--- a/include/linux/comedi/comedi_8255.h
+++ b/include/linux/comedi/comedi_8255.h
@@ -10,6 +10,8 @@
#ifndef _COMEDI_8255_H
#define _COMEDI_8255_H
+#include <linux/errno.h>
+
#define I8255_SIZE 0x04
#define I8255_DATA_A_REG 0x00
@@ -27,8 +29,17 @@
struct comedi_device;
struct comedi_subdevice;
+#ifdef CONFIG_HAS_IOPORT
int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned long regbase);
+#else
+static inline int subdev_8255_io_init(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned long regbase)
+{
+ return -ENXIO;
+}
+#endif
int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned long regbase);
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 08/13] comedi: ni_labpc_common: Conditionally remove I/O port support
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (6 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 07/13] comedi: comedi_8255: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO Ian Abbott
` (5 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards). The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.
Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_IOPORT`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.
Add a run-time check in the `labpc_common_attach()` to return an error
if the comedi device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT`. Edit commit
message to describe run-time check in `labpc_common_attach()`, and to
mention that the changes allow the module to be built even if the port
I/O functions have not been declared.
v3: N/A.
---
drivers/comedi/drivers/ni_labpc_common.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index 5d5c1d0e9cb6..7e0ce0ce0adf 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -78,6 +78,9 @@ static const struct comedi_lrange range_labpc_ao = {
* functions that do inb/outb and readb/writeb so we can use
* function pointers to decide which to use
*/
+
+#ifdef CONFIG_HAS_IOPORT
+
static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg)
{
return inb(dev->iobase + reg);
@@ -89,6 +92,8 @@ static void labpc_outb(struct comedi_device *dev,
outb(byte, dev->iobase + reg);
}
+#endif /* CONFIG_HAS_IOPORT */
+
static unsigned int labpc_readb(struct comedi_device *dev, unsigned long reg)
{
return readb(dev->mmio + reg);
@@ -1200,8 +1205,12 @@ int labpc_common_attach(struct comedi_device *dev,
devpriv->read_byte = labpc_readb;
devpriv->write_byte = labpc_writeb;
} else {
+#ifdef CONFIG_HAS_IOPORT
devpriv->read_byte = labpc_inb;
devpriv->write_byte = labpc_outb;
+#else
+ return -ENXIO;
+#endif
}
/* initialize board's command registers */
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (7 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 08/13] comedi: ni_labpc_common: " Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O Ian Abbott
` (4 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The "ni_mio_common.c" file contains calls to both port I/O functions and
memory-mapped I/O functions. The file is `#include`d by "ni_atmio.c",
"ni_mio_cs.c", and "ni_pcimio.c" for the ni_atmio, ni_mio_cs, and
ni_pcimio modules, respectively. Only "ni_pcimio.c" defines the
`PCIDMA` macro before including "ni_mio_common.c" and various bits of
code in "ni_mio_common.c" is conditionally compiled according to whether
that macro is defined or not. Currently, the port I/O function calls
are compiled in regardless of whether the `PCIDMA` macro is defined or
not. However, the fact is that the ni_atmio and ni_mio_cs modules will
never call the memory-mapped I/O functions, and the ni_pcimio module
will never call the port I/O functions.
Calls to the port I/O and memory-mapped I/O functions is confined to the
`ni_writel()`, `ni_writew()`, `ni_writeb()`, `ni_readl()`, `ni_readw()`,
and `ni_readb()` functions which do a run-time test to decide whether to
call the port I/O functions or the memory-mapped I/O functions.
Conditionally compile two variants of the functions so they only call
the port I/O functions if the `PCIDMA` macro is undefined (for the
ni_atmio and ni_mio_cs modules), and only call the memory-mapped I/O
functions if the `PCIDMA` macro is defined (for the ni_pcimio module).
Add a run-time check in the `ni_E_init()` function to return an error if
the comedi device has been set up to use port I/O if `PCIDMA` is
defined, or has been set up to use memory-mapped I/O if `PCIDMA` is not
defined.
The changes make it possible to build the ni_pcimio module even if the
port I/O functions have not been declared. (The ni_atmio and ni_mio_cs
modules do still require the port I/O functions to be declared.)
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: Add missing `---` divider before patch changelog.
---
drivers/comedi/drivers/ni_mio_common.c | 70 ++++++++++++++++++--------
1 file changed, 50 insertions(+), 20 deletions(-)
diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c
index 638be08b43e4..980f309d6de7 100644
--- a/drivers/comedi/drivers/ni_mio_common.c
+++ b/drivers/comedi/drivers/ni_mio_common.c
@@ -46,6 +46,12 @@
#include <linux/comedi/comedi_8255.h>
#include "mite.h"
+#ifdef PCIDMA
+#define IS_PCIMIO 1
+#else
+#define IS_PCIMIO 0
+#endif
+
/* A timeout count */
#define NI_TIMEOUT 1000
@@ -219,54 +225,72 @@ enum timebase_nanoseconds {
static const int num_adc_stages_611x = 3;
+#ifdef PCIDMA
+
static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writel(data, dev->mmio + reg);
- else
- outl(data, dev->iobase + reg);
+ writel(data, dev->mmio + reg);
}
static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writew(data, dev->mmio + reg);
- else
- outw(data, dev->iobase + reg);
+ writew(data, dev->mmio + reg);
}
static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writeb(data, dev->mmio + reg);
- else
- outb(data, dev->iobase + reg);
+ writeb(data, dev->mmio + reg);
}
static unsigned int ni_readl(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readl(dev->mmio + reg);
+ return readl(dev->mmio + reg);
+}
+
+static unsigned int ni_readw(struct comedi_device *dev, int reg)
+{
+ return readw(dev->mmio + reg);
+}
+
+static unsigned int ni_readb(struct comedi_device *dev, int reg)
+{
+ return readb(dev->mmio + reg);
+}
+#else /* PCIDMA */
+
+static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outl(data, dev->iobase + reg);
+}
+
+static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outw(data, dev->iobase + reg);
+}
+
+static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outb(data, dev->iobase + reg);
+}
+
+static unsigned int ni_readl(struct comedi_device *dev, int reg)
+{
return inl(dev->iobase + reg);
}
static unsigned int ni_readw(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readw(dev->mmio + reg);
-
return inw(dev->iobase + reg);
}
static unsigned int ni_readb(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readb(dev->mmio + reg);
-
return inb(dev->iobase + reg);
}
+#endif /* PCIDMA */
+
/*
* We automatically take advantage of STC registers that can be
* read/written directly in the I/O space of the board.
@@ -5977,6 +6001,12 @@ static int ni_E_init(struct comedi_device *dev,
int i;
const char *dev_family = devpriv->is_m_series ? "ni_mseries"
: "ni_eseries";
+ if (!IS_PCIMIO != !dev->mmio) {
+ dev_err(dev->class_dev,
+ "%s: bug! %s device not supported.\n",
+ KBUILD_MODNAME, board->name);
+ return -ENXIO;
+ }
/* prepare the device for globally-named routes. */
if (ni_assign_device_routes(dev_family, board->name,
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (8 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 11/13] comedi: amplc_dio200_common: Refactor register access functions Ian Abbott
` (3 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_pci module supports various Amplicon PCI and PCI
Express devices. Some of the supported devices (the PCI ones) use port
I/O, and some of them (the PCIe ones) only use memory-mapped I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined.
Add a run-time check in `dio200_pci_auto_attach()` to return an error if
the device actually requires port I/O (based on the PCI BAR resource
flags) but the `HAS_IOPORT` configuration option is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT` in commit
description.
v3: N/A.
---
drivers/comedi/drivers/amplc_dio200_pci.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/drivers/amplc_dio200_pci.c b/drivers/comedi/drivers/amplc_dio200_pci.c
index 527994d82a1f..cb5b328a28e3 100644
--- a/drivers/comedi/drivers/amplc_dio200_pci.c
+++ b/drivers/comedi/drivers/amplc_dio200_pci.c
@@ -223,14 +223,17 @@
*/
enum dio200_pci_model {
+#ifdef CONFIG_HAS_IOPORT
pci215_model,
pci272_model,
+#endif /* CONFIG_HAS_IOPORT */
pcie215_model,
pcie236_model,
pcie296_model
};
static const struct dio200_board dio200_pci_boards[] = {
+#ifdef CONFIG_HAS_IOPORT
[pci215_model] = {
.name = "pci215",
.mainbar = 2,
@@ -252,6 +255,7 @@ static const struct dio200_board dio200_pci_boards[] = {
.sdinfo = { 0x00, 0x08, 0x10, 0x3f },
.has_int_sce = true,
},
+#endif /* CONFIG_HAS_IOPORT */
[pcie215_model] = {
.name = "pcie215",
.mainbar = 1,
@@ -364,8 +368,12 @@ static int dio200_pci_auto_attach(struct comedi_device *dev,
"error! cannot remap registers\n");
return -ENOMEM;
}
- } else {
+ } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) {
dev->iobase = pci_resource_start(pci_dev, bar);
+ } else {
+ dev_err(dev->class_dev,
+ "error! need I/O port support\n");
+ return -ENXIO;
}
if (board->is_pcie) {
@@ -385,8 +393,10 @@ static struct comedi_driver dio200_pci_comedi_driver = {
};
static const struct pci_device_id dio200_pci_table[] = {
+#ifdef CONFIG_HAS_IOPORT
{ PCI_VDEVICE(AMPLICON, 0x000b), pci215_model },
{ PCI_VDEVICE(AMPLICON, 0x000a), pci272_model },
+#endif /* CONFIG_HAS_IOPORT */
{ PCI_VDEVICE(AMPLICON, 0x0011), pcie236_model },
{ PCI_VDEVICE(AMPLICON, 0x0012), pcie215_model },
{ PCI_VDEVICE(AMPLICON, 0x0014), pcie296_model },
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 11/13] comedi: amplc_dio200_common: Refactor register access functions
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (9 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support Ian Abbott
` (2 subsequent siblings)
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
The `dio200_read8()`, `dio200_write8()`, `dio200_read32()` and
`dio200_write32()` functions apply a right-shift to the register offset
for some devices and then perform the actual register access. Factor
the register access part out to new functions `dio200___read8()`,
`dio200___write8()`, `dio200___read32()`, and `dio200___write32()`.
This will reduce duplicated code in a subsequent patch that will
conditionally compile support for port I/O as part of the `HAS_IOPORT`
changes.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `HAS_PORTIO` to `HAS_IOPORT` in commit description.
v3: N/A.
---
drivers/comedi/drivers/amplc_dio200_common.c | 52 ++++++++++++++------
1 file changed, 38 insertions(+), 14 deletions(-)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index 19166cb26f5e..e6d63e89e7bf 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -86,6 +86,40 @@ struct dio200_subdev_intr {
unsigned int active:1;
};
+static unsigned char dio200___read8(struct comedi_device *dev,
+ unsigned int offset)
+{
+ if (dev->mmio)
+ return readb(dev->mmio + offset);
+ return inb(dev->iobase + offset);
+}
+
+static void dio200___write8(struct comedi_device *dev,
+ unsigned int offset, unsigned char val)
+{
+ if (dev->mmio)
+ writeb(val, dev->mmio + offset);
+ else
+ outb(val, dev->iobase + offset);
+}
+
+static unsigned int dio200___read32(struct comedi_device *dev,
+ unsigned int offset)
+{
+ if (dev->mmio)
+ return readl(dev->mmio + offset);
+ return inl(dev->iobase + offset);
+}
+
+static void dio200___write32(struct comedi_device *dev,
+ unsigned int offset, unsigned int val)
+{
+ if (dev->mmio)
+ writel(val, dev->mmio + offset);
+ else
+ outl(val, dev->iobase + offset);
+}
+
static unsigned char dio200_read8(struct comedi_device *dev,
unsigned int offset)
{
@@ -94,9 +128,7 @@ static unsigned char dio200_read8(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- return readb(dev->mmio + offset);
- return inb(dev->iobase + offset);
+ return dio200___read8(dev, offset);
}
static void dio200_write8(struct comedi_device *dev,
@@ -107,10 +139,7 @@ static void dio200_write8(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- writeb(val, dev->mmio + offset);
- else
- outb(val, dev->iobase + offset);
+ dio200___write8(dev, offset, val);
}
static unsigned int dio200_read32(struct comedi_device *dev,
@@ -121,9 +150,7 @@ static unsigned int dio200_read32(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- return readl(dev->mmio + offset);
- return inl(dev->iobase + offset);
+ return dio200___read32(dev, offset);
}
static void dio200_write32(struct comedi_device *dev,
@@ -134,10 +161,7 @@ static void dio200_write32(struct comedi_device *dev,
if (board->is_pcie)
offset <<= 3;
- if (dev->mmio)
- writel(val, dev->mmio + offset);
- else
- outl(val, dev->iobase + offset);
+ dio200___write32(dev, offset, val);
}
static unsigned int dio200_subdev_8254_offset(struct comedi_device *dev,
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (10 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 11/13] comedi: amplc_dio200_common: Refactor register access functions Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-13 17:07 ` [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
2023-09-13 17:15 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_common module is used by the amplc_dio200 module (for
ISA cards) and the amplc_dio200_pci module (for PCI and PCI Express
cards). It supports both port I/O and memory-mapped I/O.
Port I/O and memory-mapped I/O is confined to the `dio200___read8()`,
`dio200___read32()`, `dio200___write8()` and `dio200___write32()`
functions. Conditionally compile two versions of those functions. If
the `CONFIG_HAS_IOPORT` macro is defined, call either the port I/O or
memory mapped I/O functions depending on the `mmio` member of the
`struct comedi_device`. If the `CONFIG_HAS_IOPORT` macro is undefined
only call the memory-mapped I/O functions.
Add a run-time check to `amplc_dio200_common_attach()` to return an
error if the device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: Correct `CONFIG_HAS_PORTIO` to `CONFIG_HAS_IOPORT` in commit
description.
v3: N/A.
---
drivers/comedi/drivers/amplc_dio200_common.c | 36 ++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c
index e6d63e89e7bf..b1a9b4c4a185 100644
--- a/drivers/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/comedi/drivers/amplc_dio200_common.c
@@ -86,6 +86,8 @@ struct dio200_subdev_intr {
unsigned int active:1;
};
+#ifdef CONFIG_HAS_IOPORT
+
static unsigned char dio200___read8(struct comedi_device *dev,
unsigned int offset)
{
@@ -120,6 +122,34 @@ static void dio200___write32(struct comedi_device *dev,
outl(val, dev->iobase + offset);
}
+#else /* CONFIG_HAS_IOPORT */
+
+static unsigned char dio200___read8(struct comedi_device *dev,
+ unsigned int offset)
+{
+ return readb(dev->mmio + offset);
+}
+
+static void dio200___write8(struct comedi_device *dev,
+ unsigned int offset, unsigned char val)
+{
+ writeb(val, dev->mmio + offset);
+}
+
+static unsigned int dio200___read32(struct comedi_device *dev,
+ unsigned int offset)
+{
+ return readl(dev->mmio + offset);
+}
+
+static void dio200___write32(struct comedi_device *dev,
+ unsigned int offset, unsigned int val)
+{
+ writel(val, dev->mmio + offset);
+}
+
+#endif /* CONFIG_HAS_IOPORT */
+
static unsigned char dio200_read8(struct comedi_device *dev,
unsigned int offset)
{
@@ -803,6 +833,12 @@ int amplc_dio200_common_attach(struct comedi_device *dev, unsigned int irq,
unsigned int n;
int ret;
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT) && !dev->mmio) {
+ dev_err(dev->class_dev,
+ "error! need I/O port support\n");
+ return -ENXIO;
+ }
+
ret = comedi_alloc_subdevices(dev, board->n_subdevs);
if (ret)
return ret;
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (11 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support Ian Abbott
@ 2023-09-13 17:07 ` Ian Abbott
2023-09-19 11:40 ` Niklas Schnelle
2023-09-13 17:15 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
13 siblings, 1 reply; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:07 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, Arnd Bergmann,
Niklas Schnelle
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
This was previously done in commit b5c75b68b7de ("comedi: add HAS_IOPORT
dependencies"), but that has been reverted because it made it impossible
to select configuration options for several comedi drivers. This is a
do-over that avoids that.
Since the original patch, modifications have been made to various comedi
modules so that they can still be built even if the port I/O functions
have not been declared, so the configuration options for building those
modules no longer need to depend on HAS_IOPORT.
Make the COMEDI_ISA_DRIVERS menu option (which allows configuration
options for ISA and PC/104 drivers to be selected) depend on HAS_IOPORT,
and also depend on ISA || ISA_BUS || PC104.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
v2: N/A.
v3: N/A.
---
drivers/comedi/Kconfig | 44 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 536101f68e0f..93c68a40a17b 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -67,6 +67,7 @@ config COMEDI_TEST
config COMEDI_PARPORT
tristate "Parallel port support"
+ depends on HAS_IOPORT
help
Enable support for the standard parallel port.
A cheap and easy way to get a few more digital I/O lines. Steal
@@ -79,6 +80,7 @@ config COMEDI_PARPORT
config COMEDI_SSV_DNP
tristate "SSV Embedded Systems DIL/Net-PC support"
depends on X86_32 || COMPILE_TEST
+ depends on HAS_IOPORT
help
Enable support for SSV Embedded Systems DIL/Net-PC
@@ -89,6 +91,8 @@ endif # COMEDI_MISC_DRIVERS
menuconfig COMEDI_ISA_DRIVERS
bool "Comedi ISA and PC/104 drivers"
+ depends on ISA || ISA_BUS || PC104
+ depends on HAS_IOPORT
help
Enable comedi ISA and PC/104 drivers to be built
@@ -589,6 +593,7 @@ config COMEDI_8255_PCI
config COMEDI_ADDI_WATCHDOG
tristate
+ depends on HAS_IOPORT
help
Provides support for the watchdog subdevice found on many ADDI-DATA
boards. This module will be automatically selected when needed. The
@@ -596,6 +601,7 @@ config COMEDI_ADDI_WATCHDOG
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_1032 cards
@@ -604,6 +610,7 @@ config COMEDI_ADDI_APCI_1032
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_1500 cards
@@ -612,6 +619,7 @@ config COMEDI_ADDI_APCI_1500
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI-1016/1516/2016 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
@@ -623,6 +631,7 @@ config COMEDI_ADDI_APCI_1516
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_1564 cards
@@ -632,6 +641,7 @@ config COMEDI_ADDI_APCI_1564
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_16xx cards
@@ -640,6 +650,7 @@ config COMEDI_ADDI_APCI_16XX
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2032 cards
@@ -649,6 +660,7 @@ config COMEDI_ADDI_APCI_2032
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
+ depends on HAS_IOPORT
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2200 cards
@@ -658,6 +670,7 @@ config COMEDI_ADDI_APCI_2200
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3120/3001 support"
+ depends on HAS_IOPORT
depends on HAS_DMA
help
Enable support for ADDI-DATA APCI_3120/3001 cards
@@ -667,6 +680,7 @@ config COMEDI_ADDI_APCI_3120
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_3501 cards
@@ -675,6 +689,7 @@ config COMEDI_ADDI_APCI_3501
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
+ depends on HAS_IOPORT
help
Enable support for ADDI-DATA APCI_3xxx cards
@@ -683,6 +698,7 @@ config COMEDI_ADDI_APCI_3XXX
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
+ depends on HAS_IOPORT
help
Enable support for ADLink PCI-6208A cards
@@ -691,6 +707,7 @@ config COMEDI_ADL_PCI6208
config COMEDI_ADL_PCI7X3X
tristate "ADLink PCI-723X/743X isolated digital i/o board support"
+ depends on HAS_IOPORT
help
Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
Supported boards include the 32-channel PCI-7230 (16 in/16 out),
@@ -702,6 +719,7 @@ config COMEDI_ADL_PCI7X3X
config COMEDI_ADL_PCI8164
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
+ depends on HAS_IOPORT
help
Enable support for ADlink PCI-8164 4 Axes Motion Control board
@@ -710,6 +728,7 @@ config COMEDI_ADL_PCI8164
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for ADlink PCI9111 cards
@@ -719,6 +738,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
+ depends on HAS_IOPORT
depends on HAS_DMA
select COMEDI_8254
help
@@ -729,6 +749,7 @@ config COMEDI_ADL_PCI9118
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x and PCI-1731 support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
@@ -739,6 +760,7 @@ config COMEDI_ADV_PCI1710
config COMEDI_ADV_PCI1720
tristate "Advantech PCI-1720 support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1720 Analog Output board.
@@ -747,6 +769,7 @@ config COMEDI_ADV_PCI1720
config COMEDI_ADV_PCI1723
tristate "Advantech PCI-1723 support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1723 cards
@@ -755,6 +778,7 @@ config COMEDI_ADV_PCI1723
config COMEDI_ADV_PCI1724
tristate "Advantech PCI-1724U support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1724U cards. These are 32-channel
analog output cards with voltage and current loop output ranges and
@@ -765,6 +789,7 @@ config COMEDI_ADV_PCI1724
config COMEDI_ADV_PCI1760
tristate "Advantech PCI-1760 support"
+ depends on HAS_IOPORT
help
Enable support for Advantech PCI-1760 board.
@@ -773,6 +798,7 @@ config COMEDI_ADV_PCI1760
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -796,6 +822,7 @@ config COMEDI_AMPLC_DIO200_PCI
config COMEDI_AMPLC_PC236_PCI
tristate "Amplicon PCI236 DIO board support"
+ depends on HAS_IOPORT
select COMEDI_AMPLC_PC236
help
Enable support for Amplicon PCI236 DIO board.
@@ -805,6 +832,7 @@ config COMEDI_AMPLC_PC236_PCI
config COMEDI_AMPLC_PC263_PCI
tristate "Amplicon PCI263 relay board support"
+ depends on HAS_IOPORT
help
Enable support for Amplicon PCI263 relay board. This is a PCI board
with 16 reed relay output channels.
@@ -814,6 +842,7 @@ config COMEDI_AMPLC_PC263_PCI
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for Amplicon PCI224 and PCI234 AO boards
@@ -823,6 +852,7 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -834,6 +864,7 @@ config COMEDI_AMPLC_PCI230
config COMEDI_CONTEC_PCI_DIO
tristate "Contec PIO1616L digital I/O board support"
+ depends on HAS_IOPORT
help
Enable support for the Contec PIO1616L digital I/O board
@@ -842,6 +873,7 @@ config COMEDI_CONTEC_PCI_DIO
config COMEDI_DAS08_PCI
tristate "DAS-08 PCI support"
+ depends on HAS_IOPORT
select COMEDI_DAS08
help
Enable support for PCI DAS-08 cards.
@@ -861,6 +893,7 @@ config COMEDI_DT3000
config COMEDI_DYNA_PCI10XX
tristate "Dynalog PCI DAQ series support"
+ depends on HAS_IOPORT
help
Enable support for Dynalog PCI DAQ series
PCI-1050
@@ -911,6 +944,7 @@ config COMEDI_JR3_PCI
config COMEDI_KE_COUNTER
tristate "Kolter-Electronic PCI Counter 1 card support"
+ depends on HAS_IOPORT
help
Enable support for Kolter-Electronic PCI Counter 1 cards
@@ -929,6 +963,7 @@ config COMEDI_CB_PCIDAS64
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -942,6 +977,7 @@ config COMEDI_CB_PCIDAS
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -953,6 +989,7 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
help
@@ -964,6 +1001,7 @@ config COMEDI_CB_PCIMDAS
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -973,6 +1011,7 @@ config COMEDI_CB_PCIMDDA
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
+ depends on HAS_IOPORT
select COMEDI_8254
help
Enable support for Meilhaus PCI data acquisition cards
@@ -1102,7 +1141,7 @@ endif # COMEDI_PCI_DRIVERS
menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Enable support for comedi PCMCIA drivers.
@@ -1253,6 +1292,7 @@ config COMEDI_8255
config COMEDI_8255_SA
tristate "Standalone 8255 support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for 8255 digital I/O as a standalone driver.
@@ -1289,10 +1329,12 @@ config COMEDI_AMPLC_DIO200
config COMEDI_AMPLC_PC236
tristate
+ depends on HAS_IOPORT
select COMEDI_8255
config COMEDI_DAS08
tristate
+ depends on HAS_IOPORT
select COMEDI_8254
select COMEDI_8255
--
2.40.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* Re: [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (12 preceding siblings ...)
2023-09-13 17:07 ` [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
@ 2023-09-13 17:15 ` Ian Abbott
13 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:15 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, H Hartley Sweeten, Arnd Bergmann, Niklas Schnelle
On 13/09/2023 18:06, Ian Abbott wrote:
> v3:
>
> 0. Patch titles and numbering is unchanged since v2.
>
> 1. Adds missing `---` divider lines before patch changelogs for patches
> 06 and 09.
^ That should read "for patches 04, 06 and 09". It doesn't affect any
commits though (for once!).
--
-=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company )=-
-=( registered in England & Wales. Regd. number: 02862268. )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
` (13 preceding siblings ...)
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
@ 2023-09-13 17:16 ` Ian Abbott
14 siblings, 0 replies; 33+ messages in thread
From: Ian Abbott @ 2023-09-13 17:16 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, H Hartley Sweeten, Arnd Bergmann, Niklas Schnelle
On 13/09/2023 17:40, Ian Abbott wrote:
> v2:
>
> 0. Patch titles and numbering is unchanged since v1.
>
> 1. Corrects [CONFIG_]HAS_PORTIO to [CONFIG_]HAS_IOPORT in the code for
> patches 05 and 08, and in the description for patches 05, 06, 08, 10,
> 11, and 12.
>
> 2. Enhances the commit description for patch 08 a bit.
Superceded by v3.
--
-=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company )=-
-=( registered in England & Wales. Regd. number: 02862268. )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again
2023-09-13 17:07 ` [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
@ 2023-09-19 11:40 ` Niklas Schnelle
2023-09-19 11:54 ` Greg Kroah-Hartman
0 siblings, 1 reply; 33+ messages in thread
From: Niklas Schnelle @ 2023-09-19 11:40 UTC (permalink / raw)
To: Ian Abbott, linux-kernel
Cc: Greg Kroah-Hartman, H Hartley Sweeten, Arnd Bergmann
On Wed, 2023-09-13 at 18:07 +0100, Ian Abbott wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> This was previously done in commit b5c75b68b7de ("comedi: add HAS_IOPORT
> dependencies"), but that has been reverted because it made it impossible
> to select configuration options for several comedi drivers. This is a
> do-over that avoids that.
>
> Since the original patch, modifications have been made to various comedi
> modules so that they can still be built even if the port I/O functions
> have not been declared, so the configuration options for building those
> modules no longer need to depend on HAS_IOPORT.
>
> Make the COMEDI_ISA_DRIVERS menu option (which allows configuration
> options for ISA and PC/104 drivers to be selected) depend on HAS_IOPORT,
> and also depend on ISA || ISA_BUS || PC104.
>
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> Cc: Arnd Bergmann <arnd@kernel.org>
> Cc: Niklas Schnelle <schnelle@linux.ibm.com>
> Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
> ---
> v2: N/A.
> v3: N/A.
I just gave this another try with the rest of my series including the
disablement of the I/O port accessors. I tried both allmodconfig and
allyesconfig on s390x and both seem fine. Also definitely see the
comedi driver's without HAS_IOPORT dependeny being built.
Thanks,
Niklas
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again
2023-09-19 11:40 ` Niklas Schnelle
@ 2023-09-19 11:54 ` Greg Kroah-Hartman
0 siblings, 0 replies; 33+ messages in thread
From: Greg Kroah-Hartman @ 2023-09-19 11:54 UTC (permalink / raw)
To: Niklas Schnelle
Cc: Ian Abbott, linux-kernel, H Hartley Sweeten, Arnd Bergmann
On Tue, Sep 19, 2023 at 01:40:53PM +0200, Niklas Schnelle wrote:
> On Wed, 2023-09-13 at 18:07 +0100, Ian Abbott wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them.
> >
> > This was previously done in commit b5c75b68b7de ("comedi: add HAS_IOPORT
> > dependencies"), but that has been reverted because it made it impossible
> > to select configuration options for several comedi drivers. This is a
> > do-over that avoids that.
> >
> > Since the original patch, modifications have been made to various comedi
> > modules so that they can still be built even if the port I/O functions
> > have not been declared, so the configuration options for building those
> > modules no longer need to depend on HAS_IOPORT.
> >
> > Make the COMEDI_ISA_DRIVERS menu option (which allows configuration
> > options for ISA and PC/104 drivers to be selected) depend on HAS_IOPORT,
> > and also depend on ISA || ISA_BUS || PC104.
> >
> > Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> > Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> > Cc: Arnd Bergmann <arnd@kernel.org>
> > Cc: Niklas Schnelle <schnelle@linux.ibm.com>
> > Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
> > ---
> > v2: N/A.
> > v3: N/A.
>
> I just gave this another try with the rest of my series including the
> disablement of the I/O port accessors. I tried both allmodconfig and
> allyesconfig on s390x and both seem fine. Also definitely see the
> comedi driver's without HAS_IOPORT dependeny being built.
Great, can we get a tested-by tag for this then?
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2023-09-19 11:55 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <Message-Id: <20230913113247.91749-1-abbotti@mev.co.uk>
2023-09-13 16:40 ` [PATCH v2 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 16:40 ` [PATCH v2 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
2023-09-13 16:40 ` [PATCH v2 02/13] comedi: comedi_8254: Use a call-back function for register access Ian Abbott
2023-09-13 16:40 ` [PATCH v2 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init() Ian Abbott
2023-09-13 16:40 ` [PATCH v2 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
2023-09-13 16:46 ` Ian Abbott
2023-09-13 16:40 ` [PATCH v2 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O Ian Abbott
2023-09-13 16:40 ` [PATCH v2 06/13] comedi: comedi_8255: Rework subdevice initialization functions Ian Abbott
2023-09-13 16:40 ` [PATCH v2 07/13] comedi: comedi_8255: Conditionally remove I/O port support Ian Abbott
2023-09-13 16:40 ` [PATCH v2 08/13] comedi: ni_labpc_common: " Ian Abbott
2023-09-13 16:40 ` [PATCH v2 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO Ian Abbott
2023-09-13 16:40 ` [PATCH v2 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O Ian Abbott
2023-09-13 16:40 ` [PATCH v2 11/13] comedi: amplc_dio200_common: Refactor register access functions Ian Abbott
2023-09-13 16:40 ` [PATCH v2 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support Ian Abbott
2023-09-13 16:40 ` [PATCH v2 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
2023-09-13 17:06 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 17:07 ` [PATCH v3 01/13] comedi: Correct dependencies for COMEDI_NI_PCIDIO Ian Abbott
2023-09-13 17:07 ` [PATCH v3 02/13] comedi: comedi_8254: Use a call-back function for register access Ian Abbott
2023-09-13 17:07 ` [PATCH v3 03/13] comedi: comedi_8254: Replace comedi_8254_init() and comedi_8254_mm_init() Ian Abbott
2023-09-13 17:07 ` [PATCH v3 04/13] comedi: comedi_8254: Conditionally remove I/O port support Ian Abbott
2023-09-13 17:07 ` [PATCH v3 05/13] comedi: 8255_pci: Conditionally remove devices that use port I/O Ian Abbott
2023-09-13 17:07 ` [PATCH v3 06/13] comedi: comedi_8255: Rework subdevice initialization functions Ian Abbott
2023-09-13 17:07 ` [PATCH v3 07/13] comedi: comedi_8255: Conditionally remove I/O port support Ian Abbott
2023-09-13 17:07 ` [PATCH v3 08/13] comedi: ni_labpc_common: " Ian Abbott
2023-09-13 17:07 ` [PATCH v3 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO Ian Abbott
2023-09-13 17:07 ` [PATCH v3 10/13] comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O Ian Abbott
2023-09-13 17:07 ` [PATCH v3 11/13] comedi: amplc_dio200_common: Refactor register access functions Ian Abbott
2023-09-13 17:07 ` [PATCH v3 12/13] comedi: amplc_dio200_common: Conditionally remove I/O port support Ian Abbott
2023-09-13 17:07 ` [PATCH v3 13/13] comedi: add HAS_IOPORT dependencies again Ian Abbott
2023-09-19 11:40 ` Niklas Schnelle
2023-09-19 11:54 ` Greg Kroah-Hartman
2023-09-13 17:15 ` [PATCH v3 00/13] comedi: Re-do HAS_IOPORT dependencies Ian Abbott
2023-09-13 17:16 ` [PATCH v2 " Ian Abbott
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).