[PATCH v3 0/3] remoteproc: qcom: Introduce DSP support for SM8650

[PATCH v3 0/3] remoteproc: qcom: Introduce DSP support for SM8650

[Neil Armstrong]

Add the bindings and driver changes for DSP support on the
SM8650 platform in order to enable the aDSP, cDSP and MPSS
subsystems to boot.

Compared to SM8550, where SM8650 uses the same dual firmware files,
(dtb file and main firmware) the memory zones requirement has changed:
- cDSP: now requires 2 memory zones to be configured as shared
  between the cDSP and the HLOS subsystem
- MPSS: In addition to the memory zone required for the SM8550
  MPSS, another one is required to be configured for MPSS
  usage only.

In order to handle this and avoid code duplication, the region_assign_*
code patch has been made more generic and is able handle multiple
DSP-only memory zones (for MPSS) or DSP-HLOS shared memory zones (cDSP)
in the same region_assign functions.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Collected bindings review tags
- Small fixes suggested by Mukesh Ojha
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-remoteproc-v2-0-609ee572e0a2@linaro.org

Changes in v2:
- Fixed sm8650 entries in allOf:if:then to match Krzysztof's comments
- Collected reviewed-by on patch 3
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-remoteproc-v1-0-a8d20e4ce18c@linaro.org

---
Neil Armstrong (3):
      dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
      remoteproc: qcom: pas: make region assign more generic
      remoteproc: qcom: pas: Add SM8650 remoteproc support

 .../bindings/remoteproc/qcom,sm8550-pas.yaml       |  44 +++++-
 drivers/remoteproc/qcom_q6v5_pas.c                 | 151 ++++++++++++++++-----
 2 files changed, 159 insertions(+), 36 deletions(-)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-remoteproc-66a87eeb6fee

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>

[PATCH v3 1/3] dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS

[Neil Armstrong]

Document the DSP Peripheral Authentication Service on the SM8650 Platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/remoteproc/qcom,sm8550-pas.yaml       | 44 +++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
index 58120829fb06..4e8ce9e7e9fa 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -19,6 +19,9 @@ properties:
       - qcom,sm8550-adsp-pas
       - qcom,sm8550-cdsp-pas
       - qcom,sm8550-mpss-pas
+      - qcom,sm8650-adsp-pas
+      - qcom,sm8650-cdsp-pas
+      - qcom,sm8650-mpss-pas
 
   reg:
     maxItems: 1
@@ -49,6 +52,7 @@ properties:
       - description: Memory region for main Firmware authentication
       - description: Memory region for Devicetree Firmware authentication
       - description: DSM Memory region
+      - description: DSM Memory region 2
 
 required:
   - compatible
@@ -63,6 +67,7 @@ allOf:
           enum:
             - qcom,sm8550-adsp-pas
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-adsp-pas
     then:
       properties:
         interrupts:
@@ -71,7 +76,26 @@ allOf:
           maxItems: 5
         memory-region:
           maxItems: 2
-    else:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-mpss-pas
+    then:
       properties:
         interrupts:
           minItems: 6
@@ -79,12 +103,28 @@ allOf:
           minItems: 6
         memory-region:
           minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-mpss-pas
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          minItems: 4
+          maxItems: 4
 
   - if:
       properties:
         compatible:
           enum:
             - qcom,sm8550-adsp-pas
+            - qcom,sm8650-adsp-pas
     then:
       properties:
         power-domains:
@@ -101,6 +141,7 @@ allOf:
         compatible:
           enum:
             - qcom,sm8550-mpss-pas
+            - qcom,sm8650-mpss-pas
     then:
       properties:
         power-domains:
@@ -116,6 +157,7 @@ allOf:
         compatible:
           enum:
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-cdsp-pas
     then:
       properties:
         power-domains:

-- 
2.34.1

[PATCH v3 2/3] remoteproc: qcom: pas: make region assign more generic

[Neil Armstrong]

The current memory region assign only supports a single
memory region.

But new platforms introduces more regions to make the
memory requirements more flexible for various use cases.
Those new platforms also shares the memory region between the
DSP and HLOS.

To handle this, make the region assign more generic in order
to support more than a single memory region and also permit
setting the regions permissions as shared.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 101 ++++++++++++++++++++++++-------------
 1 file changed, 66 insertions(+), 35 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 913a5d2068e8..2ea364a04d4c 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -33,6 +33,8 @@
 
 #define ADSP_DECRYPT_SHUTDOWN_DELAY_MS	100
 
+#define MAX_ASSIGN_COUNT 2
+
 struct adsp_data {
 	int crash_reason_smem;
 	const char *firmware_name;
@@ -51,6 +53,9 @@ struct adsp_data {
 	int ssctl_id;
 
 	int region_assign_idx;
+	int region_assign_count;
+	bool region_assign_shared;
+	int region_assign_vmid;
 };
 
 struct qcom_adsp {
@@ -87,15 +92,18 @@ struct qcom_adsp {
 	phys_addr_t dtb_mem_phys;
 	phys_addr_t mem_reloc;
 	phys_addr_t dtb_mem_reloc;
-	phys_addr_t region_assign_phys;
+	phys_addr_t region_assign_phys[MAX_ASSIGN_COUNT];
 	void *mem_region;
 	void *dtb_mem_region;
 	size_t mem_size;
 	size_t dtb_mem_size;
-	size_t region_assign_size;
+	size_t region_assign_size[MAX_ASSIGN_COUNT];
 
 	int region_assign_idx;
-	u64 region_assign_perms;
+	int region_assign_count;
+	bool region_assign_shared;
+	int region_assign_vmid;
+	u64 region_assign_perms[MAX_ASSIGN_COUNT];
 
 	struct qcom_rproc_glink glink_subdev;
 	struct qcom_rproc_subdev smd_subdev;
@@ -590,37 +598,53 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 
 static int adsp_assign_memory_region(struct qcom_adsp *adsp)
 {
-	struct reserved_mem *rmem = NULL;
-	struct qcom_scm_vmperm perm;
+	struct qcom_scm_vmperm perm[MAX_ASSIGN_COUNT];
 	struct device_node *node;
+	unsigned int perm_size;
+	int offset;
 	int ret;
 
 	if (!adsp->region_assign_idx)
 		return 0;
 
-	node = of_parse_phandle(adsp->dev->of_node, "memory-region", adsp->region_assign_idx);
-	if (node)
-		rmem = of_reserved_mem_lookup(node);
-	of_node_put(node);
-	if (!rmem) {
-		dev_err(adsp->dev, "unable to resolve shareable memory-region\n");
-		return -EINVAL;
-	}
+	for (offset = 0; offset < adsp->region_assign_count; ++offset) {
+		struct reserved_mem *rmem = NULL;
+
+		node = of_parse_phandle(adsp->dev->of_node, "memory-region",
+					adsp->region_assign_idx + offset);
+		if (node)
+			rmem = of_reserved_mem_lookup(node);
+		of_node_put(node);
+		if (!rmem) {
+			dev_err(adsp->dev, "unable to resolve shareable memory-region index %d\n",
+				offset);
+			return -EINVAL;
+		}
 
-	perm.vmid = QCOM_SCM_VMID_MSS_MSA;
-	perm.perm = QCOM_SCM_PERM_RW;
+		if (adsp->region_assign_shared)  {
+			perm[0].vmid = QCOM_SCM_VMID_HLOS;
+			perm[0].perm = QCOM_SCM_PERM_RW;
+			perm[1].vmid = adsp->region_assign_vmid;
+			perm[1].perm = QCOM_SCM_PERM_RW;
+			perm_size = 2;
+		} else {
+			perm[0].vmid = adsp->region_assign_vmid;
+			perm[0].perm = QCOM_SCM_PERM_RW;
+			perm_size = 1;
+		}
 
-	adsp->region_assign_phys = rmem->base;
-	adsp->region_assign_size = rmem->size;
-	adsp->region_assign_perms = BIT(QCOM_SCM_VMID_HLOS);
+		adsp->region_assign_phys[offset] = rmem->base;
+		adsp->region_assign_size[offset] = rmem->size;
+		adsp->region_assign_perms[offset] = BIT(QCOM_SCM_VMID_HLOS);
 
-	ret = qcom_scm_assign_mem(adsp->region_assign_phys,
-				  adsp->region_assign_size,
-				  &adsp->region_assign_perms,
-				  &perm, 1);
-	if (ret < 0) {
-		dev_err(adsp->dev, "assign memory failed\n");
-		return ret;
+		ret = qcom_scm_assign_mem(adsp->region_assign_phys[offset],
+					  adsp->region_assign_size[offset],
+					  &adsp->region_assign_perms[offset],
+					  perm, perm_size);
+		if (ret < 0) {
+			dev_err(adsp->dev, "assign memory %d failed\n", offset);
+			return ret;
+		}
 	}
 
 	return 0;
@@ -629,20 +653,22 @@ static int adsp_assign_memory_region(struct qcom_adsp *adsp)
 static void adsp_unassign_memory_region(struct qcom_adsp *adsp)
 {
 	struct qcom_scm_vmperm perm;
-	int ret;
+	int offset, ret;
 
-	if (!adsp->region_assign_idx)
+	if (!adsp->region_assign_idx || adsp->region_assign_shared)
 		return;
 
-	perm.vmid = QCOM_SCM_VMID_HLOS;
-	perm.perm = QCOM_SCM_PERM_RW;
+	for (offset = 0; offset < adsp->region_assign_count; ++offset) {
+		perm.vmid = QCOM_SCM_VMID_HLOS;
+		perm.perm = QCOM_SCM_PERM_RW;
 
-	ret = qcom_scm_assign_mem(adsp->region_assign_phys,
-				  adsp->region_assign_size,
-				  &adsp->region_assign_perms,
-				  &perm, 1);
-	if (ret < 0)
-		dev_err(adsp->dev, "unassign memory failed\n");
+		ret = qcom_scm_assign_mem(adsp->region_assign_phys[offset],
+					  adsp->region_assign_size[offset],
+					  &adsp->region_assign_perms[offset],
+					  &perm, 1);
+		if (ret < 0)
+			dev_err(adsp->dev, "unassign memory failed\n");
+	}
 }
 
 static int adsp_probe(struct platform_device *pdev)
@@ -696,6 +722,9 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->info_name = desc->sysmon_name;
 	adsp->decrypt_shutdown = desc->decrypt_shutdown;
 	adsp->region_assign_idx = desc->region_assign_idx;
+	adsp->region_assign_count = min_t(int, MAX_ASSIGN_COUNT, desc->region_assign_count);
+	adsp->region_assign_vmid = desc->region_assign_vmid;
+	adsp->region_assign_shared = desc->region_assign_shared;
 	if (dtb_fw_name) {
 		adsp->dtb_firmware_name = dtb_fw_name;
 		adsp->dtb_pas_id = desc->dtb_pas_id;
@@ -1163,6 +1192,8 @@ static const struct adsp_data sm8550_mpss_resource = {
 	.sysmon_name = "modem",
 	.ssctl_id = 0x12,
 	.region_assign_idx = 2,
+	.region_assign_count = 1,
+	.region_assign_vmid = QCOM_SCM_VMID_MSS_MSA,
 };
 
 static const struct of_device_id adsp_of_match[] = {

-- 
2.34.1

[PATCH v3 3/3] remoteproc: qcom: pas: Add SM8650 remoteproc support

[Neil Armstrong]

Add DSP Peripheral Authentication Service support for the SM8650 platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 50 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 2ea364a04d4c..8f7429d86a6f 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -1196,6 +1196,53 @@ static const struct adsp_data sm8550_mpss_resource = {
 	.region_assign_vmid = QCOM_SCM_VMID_MSS_MSA,
 };
 
+static const struct adsp_data sm8650_cdsp_resource = {
+	.crash_reason_smem = 601,
+	.firmware_name = "cdsp.mdt",
+	.dtb_firmware_name = "cdsp_dtb.mdt",
+	.pas_id = 18,
+	.dtb_pas_id = 0x25,
+	.minidump_id = 7,
+	.auto_boot = true,
+	.proxy_pd_names = (char*[]){
+		"cx",
+		"mxc",
+		"nsp",
+		NULL
+	},
+	.load_state = "cdsp",
+	.ssr_name = "cdsp",
+	.sysmon_name = "cdsp",
+	.ssctl_id = 0x17,
+	.region_assign_idx = 2,
+	.region_assign_count = 1,
+	.region_assign_shared = true,
+	.region_assign_vmid = QCOM_SCM_VMID_CDSP,
+};
+
+static const struct adsp_data sm8650_mpss_resource = {
+	.crash_reason_smem = 421,
+	.firmware_name = "modem.mdt",
+	.dtb_firmware_name = "modem_dtb.mdt",
+	.pas_id = 4,
+	.dtb_pas_id = 0x26,
+	.minidump_id = 3,
+	.auto_boot = false,
+	.decrypt_shutdown = true,
+	.proxy_pd_names = (char*[]){
+		"cx",
+		"mss",
+		NULL
+	},
+	.load_state = "modem",
+	.ssr_name = "mpss",
+	.sysmon_name = "modem",
+	.ssctl_id = 0x12,
+	.region_assign_idx = 2,
+	.region_assign_count = 2,
+	.region_assign_vmid = QCOM_SCM_VMID_MSS_MSA,
+};
+
 static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init},
 	{ .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource},
@@ -1248,6 +1295,9 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sm8550-adsp-pas", .data = &sm8550_adsp_resource},
 	{ .compatible = "qcom,sm8550-cdsp-pas", .data = &sm8550_cdsp_resource},
 	{ .compatible = "qcom,sm8550-mpss-pas", .data = &sm8550_mpss_resource},
+	{ .compatible = "qcom,sm8650-adsp-pas", .data = &sm8550_adsp_resource},
+	{ .compatible = "qcom,sm8650-cdsp-pas", .data = &sm8650_cdsp_resource},
+	{ .compatible = "qcom,sm8650-mpss-pas", .data = &sm8650_mpss_resource},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, adsp_of_match);

-- 
2.34.1

Re: [PATCH v3 2/3] remoteproc: qcom: pas: make region assign more generic

[Mukesh Ojha]

On 11/6/2023 1:58 PM, Neil Armstrong wrote:
> The current memory region assign only supports a single
> memory region.
> 
> But new platforms introduces more regions to make the
> memory requirements more flexible for various use cases.
> Those new platforms also shares the memory region between the
> DSP and HLOS.
> 
> To handle this, make the region assign more generic in order
> to support more than a single memory region and also permit
> setting the regions permissions as shared.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>   drivers/remoteproc/qcom_q6v5_pas.c | 101 ++++++++++++++++++++++++-------------
>   1 file changed, 66 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 913a5d2068e8..2ea364a04d4c 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -33,6 +33,8 @@
>   
>   #define ADSP_DECRYPT_SHUTDOWN_DELAY_MS	100
>   
> +#define MAX_ASSIGN_COUNT 2
> +
>   struct adsp_data {
>   	int crash_reason_smem;
>   	const char *firmware_name;
> @@ -51,6 +53,9 @@ struct adsp_data {
>   	int ssctl_id;
>   
>   	int region_assign_idx;
> +	int region_assign_count;
> +	bool region_assign_shared;
> +	int region_assign_vmid;
>   };
>   
>   struct qcom_adsp {
> @@ -87,15 +92,18 @@ struct qcom_adsp {
>   	phys_addr_t dtb_mem_phys;
>   	phys_addr_t mem_reloc;
>   	phys_addr_t dtb_mem_reloc;
> -	phys_addr_t region_assign_phys;
> +	phys_addr_t region_assign_phys[MAX_ASSIGN_COUNT];
>   	void *mem_region;
>   	void *dtb_mem_region;
>   	size_t mem_size;
>   	size_t dtb_mem_size;
> -	size_t region_assign_size;
> +	size_t region_assign_size[MAX_ASSIGN_COUNT];
>   
>   	int region_assign_idx;
> -	u64 region_assign_perms;
> +	int region_assign_count;
> +	bool region_assign_shared;
> +	int region_assign_vmid;
> +	u64 region_assign_perms[MAX_ASSIGN_COUNT];
>   
>   	struct qcom_rproc_glink glink_subdev;
>   	struct qcom_rproc_subdev smd_subdev;
> @@ -590,37 +598,53 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
>   
>   static int adsp_assign_memory_region(struct qcom_adsp *adsp)
>   {
> -	struct reserved_mem *rmem = NULL;
> -	struct qcom_scm_vmperm perm;
> +	struct qcom_scm_vmperm perm[MAX_ASSIGN_COUNT];
>   	struct device_node *node;
> +	unsigned int perm_size;
> +	int offset;
>   	int ret;
>   
>   	if (!adsp->region_assign_idx)
>   		return 0;
>   
> -	node = of_parse_phandle(adsp->dev->of_node, "memory-region", adsp->region_assign_idx);
> -	if (node)
> -		rmem = of_reserved_mem_lookup(node);
> -	of_node_put(node);
> -	if (!rmem) {
> -		dev_err(adsp->dev, "unable to resolve shareable memory-region\n");
> -		return -EINVAL;
> -	}
> +	for (offset = 0; offset < adsp->region_assign_count; ++offset) {
> +		struct reserved_mem *rmem = NULL;
> +
> +		node = of_parse_phandle(adsp->dev->of_node, "memory-region",
> +					adsp->region_assign_idx + offset);
> +		if (node)
> +			rmem = of_reserved_mem_lookup(node);
> +		of_node_put(node);
> +		if (!rmem) {
> +			dev_err(adsp->dev, "unable to resolve shareable memory-region index %d\n",
> +				offset);
> +			return -EINVAL;
> +		}
>   
> -	perm.vmid = QCOM_SCM_VMID_MSS_MSA;
> -	perm.perm = QCOM_SCM_PERM_RW;
> +		if (adsp->region_assign_shared)  {
> +			perm[0].vmid = QCOM_SCM_VMID_HLOS;
> +			perm[0].perm = QCOM_SCM_PERM_RW;
> +			perm[1].vmid = adsp->region_assign_vmid;
> +			perm[1].perm = QCOM_SCM_PERM_RW;
> +			perm_size = 2;
> +		} else {
> +			perm[0].vmid = adsp->region_assign_vmid;
> +			perm[0].perm = QCOM_SCM_PERM_RW;
> +			perm_size = 1;
> +		}
>   
> -	adsp->region_assign_phys = rmem->base;
> -	adsp->region_assign_size = rmem->size;
> -	adsp->region_assign_perms = BIT(QCOM_SCM_VMID_HLOS);
> +		adsp->region_assign_phys[offset] = rmem->base;
> +		adsp->region_assign_size[offset] = rmem->size;
> +		adsp->region_assign_perms[offset] = BIT(QCOM_SCM_VMID_HLOS);
>   
> -	ret = qcom_scm_assign_mem(adsp->region_assign_phys,
> -				  adsp->region_assign_size,
> -				  &adsp->region_assign_perms,
> -				  &perm, 1);
> -	if (ret < 0) {
> -		dev_err(adsp->dev, "assign memory failed\n");
> -		return ret;
> +		ret = qcom_scm_assign_mem(adsp->region_assign_phys[offset],
> +					  adsp->region_assign_size[offset],
> +					  &adsp->region_assign_perms[offset],
> +					  perm, perm_size);
> +		if (ret < 0) {
> +			dev_err(adsp->dev, "assign memory %d failed\n", offset);
> +			return ret;
> +		}
>   	}
>   
>   	return 0;
> @@ -629,20 +653,22 @@ static int adsp_assign_memory_region(struct qcom_adsp *adsp)
>   static void adsp_unassign_memory_region(struct qcom_adsp *adsp)
>   {
>   	struct qcom_scm_vmperm perm;
> -	int ret;
> +	int offset, ret;

one variable per line..

>   
> -	if (!adsp->region_assign_idx)
> +	if (!adsp->region_assign_idx || adsp->region_assign_shared)
>   		return;
>   
> -	perm.vmid = QCOM_SCM_VMID_HLOS;
> -	perm.perm = QCOM_SCM_PERM_RW;
> +	for (offset = 0; offset < adsp->region_assign_count; ++offset) {
> +		perm.vmid = QCOM_SCM_VMID_HLOS;
> +		perm.perm = QCOM_SCM_PERM_RW;
>   
> -	ret = qcom_scm_assign_mem(adsp->region_assign_phys,
> -				  adsp->region_assign_size,
> -				  &adsp->region_assign_perms,
> -				  &perm, 1);
> -	if (ret < 0)
> -		dev_err(adsp->dev, "unassign memory failed\n");
> +		ret = qcom_scm_assign_mem(adsp->region_assign_phys[offset],
> +					  adsp->region_assign_size[offset],
> +					  &adsp->region_assign_perms[offset],
> +					  &perm, 1);
> +		if (ret < 0)
> +			dev_err(adsp->dev, "unassign memory failed\n");

In case you are going to send another version,
you can print offset similar to the assign call failure.,

Otherwise, LGTM.
Feel free to add.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> +	}
>   }
>   
>   static int adsp_probe(struct platform_device *pdev)
> @@ -696,6 +722,9 @@ static int adsp_probe(struct platform_device *pdev)
>   	adsp->info_name = desc->sysmon_name;
>   	adsp->decrypt_shutdown = desc->decrypt_shutdown;
>   	adsp->region_assign_idx = desc->region_assign_idx;
> +	adsp->region_assign_count = min_t(int, MAX_ASSIGN_COUNT, desc->region_assign_count);
> +	adsp->region_assign_vmid = desc->region_assign_vmid;
> +	adsp->region_assign_shared = desc->region_assign_shared;
>   	if (dtb_fw_name) {
>   		adsp->dtb_firmware_name = dtb_fw_name;
>   		adsp->dtb_pas_id = desc->dtb_pas_id;
> @@ -1163,6 +1192,8 @@ static const struct adsp_data sm8550_mpss_resource = {
>   	.sysmon_name = "modem",
>   	.ssctl_id = 0x12,
>   	.region_assign_idx = 2,
> +	.region_assign_count = 1,
> +	.region_assign_vmid = QCOM_SCM_VMID_MSS_MSA,
>   };
>   
>   static const struct of_device_id adsp_of_match[] = {
>