[PATCH AUTOSEL 6.5 01/18] iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()

[PATCH AUTOSEL 6.5 01/18] iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()

[Sasha Levin]

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit 3a23b384e7e3d64d5587ad10729a34d4f761517e ]

of_match_device() may fail and returns a NULL pointer.

In practice there is no known reasonable way to trigger this, but
in case one is added in future, harden the code by adding the check

Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_994DA85912C937E3B5405BA960B31ED90A08@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/stm32-adc-core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 48f02dcc81c1b..70011fdbf5f63 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -706,6 +706,8 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	struct stm32_adc_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+
 	struct resource *res;
 	u32 max_rate;
 	int ret;
@@ -718,8 +720,11 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, &priv->common);
 
-	priv->cfg = (const struct stm32_adc_priv_cfg *)
-		of_match_device(dev->driver->of_match_table, dev)->data;
+	of_id = of_match_device(dev->driver->of_match_table, dev);
+	if (!of_id)
+		return -ENODEV;
+
+	priv->cfg = (const struct stm32_adc_priv_cfg *)of_id->data;
 	priv->nb_adc_max = priv->cfg->num_adcs;
 	spin_lock_init(&priv->common.lock);
 
-- 
2.42.0

[PATCH AUTOSEL 6.5 02/18] thunderbolt: Apply USB 3.x bandwidth quirk only in software connection manager

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 0c35ac18256942e66d8dab6ca049185812e60c69 ]

This is not needed when firmware connection manager is run so limit this
to software connection manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/quirks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c
index 488138a28ae13..e6bfa63b40aee 100644
--- a/drivers/thunderbolt/quirks.c
+++ b/drivers/thunderbolt/quirks.c
@@ -31,6 +31,9 @@ static void quirk_usb3_maximum_bandwidth(struct tb_switch *sw)
 {
 	struct tb_port *port;
 
+	if (tb_switch_is_icm(sw))
+		return;
+
 	tb_switch_for_each_port(sw, port) {
 		if (!tb_port_is_usb3_down(port))
 			continue;
-- 
2.42.0

[PATCH AUTOSEL 6.5 03/18] tty: vcc: Add check for kstrdup() in vcc_probe()

[Sasha Levin]

From: Yi Yang <yiyang13@huawei.com>

[ Upstream commit d81ffb87aaa75f842cd7aa57091810353755b3e6 ]

Add check for the return value of kstrdup() and return the error, if it
fails in order to avoid NULL pointer dereference.

Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vcc.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index 34ba6e54789a7..b8b832c75b856 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -579,18 +579,22 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		return -ENOMEM;
 
 	name = kstrdup(dev_name(&vdev->dev), GFP_KERNEL);
+	if (!name) {
+		rv = -ENOMEM;
+		goto free_port;
+	}
 
 	rv = vio_driver_init(&port->vio, vdev, VDEV_CONSOLE_CON, vcc_versions,
 			     ARRAY_SIZE(vcc_versions), NULL, name);
 	if (rv)
-		goto free_port;
+		goto free_name;
 
 	port->vio.debug = vcc_dbg_vio;
 	vcc_ldc_cfg.debug = vcc_dbg_ldc;
 
 	rv = vio_ldc_alloc(&port->vio, &vcc_ldc_cfg, port);
 	if (rv)
-		goto free_port;
+		goto free_name;
 
 	spin_lock_init(&port->lock);
 
@@ -624,6 +628,11 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		goto unreg_tty;
 	}
 	port->domain = kstrdup(domain, GFP_KERNEL);
+	if (!port->domain) {
+		rv = -ENOMEM;
+		goto unreg_tty;
+	}
+
 
 	mdesc_release(hp);
 
@@ -653,8 +662,9 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	vcc_table_remove(port->index);
 free_ldc:
 	vio_ldc_free(&port->vio);
-free_port:
+free_name:
 	kfree(name);
+free_port:
 	kfree(port);
 
 	return rv;
-- 
2.42.0

[PATCH AUTOSEL 6.5 04/18] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit c20b59b2996c89c4f072c3312e6210528a298330 ]

The EUSB2 repeater requires some alterations to its init sequence,
depending on board design.

Add support for making the necessary changes to that sequence to make USB
functional on SM8550-based Xperia 1 V.

They all have lackluster description due to lack of information.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-1-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../phy/qcom,snps-eusb2-repeater.yaml         | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
index 083fda530b484..828650d4c4b09 100644
--- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -27,6 +27,27 @@ properties:
 
   vdd3-supply: true
 
+  qcom,tune-usb2-disc-thres:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed disconnect threshold
+    minimum: 0
+    maximum: 7
+    default: 0
+
+  qcom,tune-usb2-amplitude:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed trasmit amplitude
+    minimum: 0
+    maximum: 15
+    default: 8
+
+  qcom,tune-usb2-preem:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed TX pre-emphasis tuning
+    minimum: 0
+    maximum: 7
+    default: 5
+
 required:
   - compatible
   - reg
-- 
2.42.0

[PATCH AUTOSEL 6.5 05/18] phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 4ba2e52718c0ce4ece6a269bec84319c355c030f ]

Switch to regmap_fields, so that the values written into registers are
sanitized by their explicit sizes and the different registers are
structured in an iterable object to make external changes to the init
sequence simpler.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-2-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../phy/qualcomm/phy-qcom-eusb2-repeater.c    | 91 +++++++++++++------
 1 file changed, 61 insertions(+), 30 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index 90f8543ba265b..b20b805414a2a 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -29,14 +29,42 @@
 #define EUSB2_TUNE_SQUELCH_U		0x54
 #define EUSB2_TUNE_USB2_PREEM		0x57
 
-#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v)	\
+#define QCOM_EUSB2_REPEATER_INIT_CFG(r, v)	\
 	{					\
-		.offset = o,			\
+		.reg = r,			\
 		.val = v,			\
 	}
 
+enum reg_fields {
+	F_TUNE_USB2_PREEM,
+	F_TUNE_SQUELCH_U,
+	F_TUNE_IUSB2,
+	F_NUM_TUNE_FIELDS,
+
+	F_FORCE_VAL_5 = F_NUM_TUNE_FIELDS,
+	F_FORCE_EN_5,
+
+	F_EN_CTL1,
+
+	F_RPTR_STATUS,
+	F_NUM_FIELDS,
+};
+
+static struct reg_field eusb2_repeater_tune_reg_fields[F_NUM_FIELDS] = {
+	[F_TUNE_USB2_PREEM] = REG_FIELD(EUSB2_TUNE_USB2_PREEM, 0, 2),
+	[F_TUNE_SQUELCH_U] = REG_FIELD(EUSB2_TUNE_SQUELCH_U, 0, 2),
+	[F_TUNE_IUSB2] = REG_FIELD(EUSB2_TUNE_IUSB2, 0, 3),
+
+	[F_FORCE_VAL_5] = REG_FIELD(EUSB2_FORCE_VAL_5, 0, 7),
+	[F_FORCE_EN_5] = REG_FIELD(EUSB2_FORCE_EN_5, 0, 7),
+
+	[F_EN_CTL1] = REG_FIELD(EUSB2_EN_CTL1, 0, 7),
+
+	[F_RPTR_STATUS] = REG_FIELD(EUSB2_RPTR_STATUS, 0, 7),
+};
+
 struct eusb2_repeater_init_tbl {
-	unsigned int offset;
+	unsigned int reg;
 	unsigned int val;
 };
 
@@ -49,11 +77,10 @@ struct eusb2_repeater_cfg {
 
 struct eusb2_repeater {
 	struct device *dev;
-	struct regmap *regmap;
+	struct regmap_field *regs[F_NUM_FIELDS];
 	struct phy *phy;
 	struct regulator_bulk_data *vregs;
 	const struct eusb2_repeater_cfg *cfg;
-	u16 base;
 	enum phy_mode mode;
 };
 
@@ -62,9 +89,9 @@ static const char * const pm8550b_vreg_l[] = {
 };
 
 static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = {
-	QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8),
-	QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3),
-	QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5),
+	QCOM_EUSB2_REPEATER_INIT_CFG(F_TUNE_IUSB2, 0x8),
+	QCOM_EUSB2_REPEATER_INIT_CFG(F_TUNE_SQUELCH_U, 0x3),
+	QCOM_EUSB2_REPEATER_INIT_CFG(F_TUNE_USB2_PREEM, 0x5),
 };
 
 static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
@@ -94,7 +121,6 @@ static int eusb2_repeater_init(struct phy *phy)
 {
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
 	const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl;
-	int num = rptr->cfg->init_tbl_num;
 	u32 val;
 	int ret;
 	int i;
@@ -103,17 +129,14 @@ static int eusb2_repeater_init(struct phy *phy)
 	if (ret)
 		return ret;
 
-	regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1,
-			   EUSB2_RPTR_EN, EUSB2_RPTR_EN);
+	regmap_field_update_bits(rptr->regs[F_EN_CTL1], EUSB2_RPTR_EN, EUSB2_RPTR_EN);
 
-	for (i = 0; i < num; i++)
-		regmap_update_bits(rptr->regmap,
-				   rptr->base + init_tbl[i].offset,
-				   init_tbl[i].val, init_tbl[i].val);
+	for (i = 0; i < rptr->cfg->init_tbl_num; i++)
+		regmap_field_update_bits(rptr->regs[init_tbl[i].reg],
+					 init_tbl[i].val, init_tbl[i].val);
 
-	ret = regmap_read_poll_timeout(rptr->regmap,
-				       rptr->base + EUSB2_RPTR_STATUS, val,
-				       val & RPTR_OK, 10, 5);
+	ret = regmap_field_read_poll_timeout(rptr->regs[F_RPTR_STATUS],
+					     val, val & RPTR_OK, 10, 5);
 	if (ret)
 		dev_err(rptr->dev, "initialization timed-out\n");
 
@@ -132,10 +155,10 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 		 * per eUSB 1.2 Spec. Below implement software workaround until
 		 * PHY and controller is fixing seen observation.
 		 */
-		regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5,
-				   F_CLK_19P2M_EN, F_CLK_19P2M_EN);
-		regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5,
-				   V_CLK_19P2M_EN, V_CLK_19P2M_EN);
+		regmap_field_update_bits(rptr->regs[F_FORCE_EN_5],
+					 F_CLK_19P2M_EN, F_CLK_19P2M_EN);
+		regmap_field_update_bits(rptr->regs[F_FORCE_VAL_5],
+					 V_CLK_19P2M_EN, V_CLK_19P2M_EN);
 		break;
 	case PHY_MODE_USB_DEVICE:
 		/*
@@ -144,10 +167,10 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 		 * repeater doesn't clear previous value due to shared
 		 * regulators (say host <-> device mode switch).
 		 */
-		regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5,
-				   F_CLK_19P2M_EN, 0);
-		regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5,
-				   V_CLK_19P2M_EN, 0);
+		regmap_field_update_bits(rptr->regs[F_FORCE_EN_5],
+					 F_CLK_19P2M_EN, 0);
+		regmap_field_update_bits(rptr->regs[F_FORCE_VAL_5],
+					 V_CLK_19P2M_EN, 0);
 		break;
 	default:
 		return -EINVAL;
@@ -176,8 +199,9 @@ static int eusb2_repeater_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
 	struct device_node *np = dev->of_node;
+	struct regmap *regmap;
+	int i, ret;
 	u32 res;
-	int ret;
 
 	rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL);
 	if (!rptr)
@@ -190,15 +214,22 @@ static int eusb2_repeater_probe(struct platform_device *pdev)
 	if (!rptr->cfg)
 		return -EINVAL;
 
-	rptr->regmap = dev_get_regmap(dev->parent, NULL);
-	if (!rptr->regmap)
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
 		return -ENODEV;
 
 	ret = of_property_read_u32(np, "reg", &res);
 	if (ret < 0)
 		return ret;
 
-	rptr->base = res;
+	for (i = 0; i < F_NUM_FIELDS; i++)
+		eusb2_repeater_tune_reg_fields[i].reg += res;
+
+	ret = devm_regmap_field_bulk_alloc(dev, regmap, rptr->regs,
+					   eusb2_repeater_tune_reg_fields,
+					   F_NUM_FIELDS);
+	if (ret)
+		return ret;
 
 	ret = eusb2_repeater_init_vregs(rptr);
 	if (ret < 0) {
-- 
2.42.0

[PATCH AUTOSEL 6.5 06/18] phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 99a517a582fc1272d1d3cf3b9e671a14d7db77b8 ]

The vendor kernel zeroes out all tuning data outside the init sequence
as part of initialization. Follow suit to avoid UB.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-3-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../phy/qualcomm/phy-qcom-eusb2-repeater.c    | 58 ++++++++++++++-----
 1 file changed, 44 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index b20b805414a2a..6777532dd4dc9 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -25,9 +25,18 @@
 #define EUSB2_FORCE_VAL_5		0xeD
 #define V_CLK_19P2M_EN			BIT(6)
 
+#define EUSB2_TUNE_USB2_CROSSOVER	0x50
 #define EUSB2_TUNE_IUSB2		0x51
+#define EUSB2_TUNE_RES_FSDIF		0x52
+#define EUSB2_TUNE_HSDISC		0x53
 #define EUSB2_TUNE_SQUELCH_U		0x54
+#define EUSB2_TUNE_USB2_SLEW		0x55
+#define EUSB2_TUNE_USB2_EQU		0x56
 #define EUSB2_TUNE_USB2_PREEM		0x57
+#define EUSB2_TUNE_USB2_HS_COMP_CUR	0x58
+#define EUSB2_TUNE_EUSB_SLEW		0x59
+#define EUSB2_TUNE_EUSB_EQU		0x5A
+#define EUSB2_TUNE_EUSB_HS_COMP_CUR	0x5B
 
 #define QCOM_EUSB2_REPEATER_INIT_CFG(r, v)	\
 	{					\
@@ -36,9 +45,18 @@
 	}
 
 enum reg_fields {
+	F_TUNE_EUSB_HS_COMP_CUR,
+	F_TUNE_EUSB_EQU,
+	F_TUNE_EUSB_SLEW,
+	F_TUNE_USB2_HS_COMP_CUR,
 	F_TUNE_USB2_PREEM,
+	F_TUNE_USB2_EQU,
+	F_TUNE_USB2_SLEW,
 	F_TUNE_SQUELCH_U,
+	F_TUNE_HSDISC,
+	F_TUNE_RES_FSDIF,
 	F_TUNE_IUSB2,
+	F_TUNE_USB2_CROSSOVER,
 	F_NUM_TUNE_FIELDS,
 
 	F_FORCE_VAL_5 = F_NUM_TUNE_FIELDS,
@@ -51,9 +69,18 @@ enum reg_fields {
 };
 
 static struct reg_field eusb2_repeater_tune_reg_fields[F_NUM_FIELDS] = {
+	[F_TUNE_EUSB_HS_COMP_CUR] = REG_FIELD(EUSB2_TUNE_EUSB_HS_COMP_CUR, 0, 1),
+	[F_TUNE_EUSB_EQU] = REG_FIELD(EUSB2_TUNE_EUSB_EQU, 0, 1),
+	[F_TUNE_EUSB_SLEW] = REG_FIELD(EUSB2_TUNE_EUSB_SLEW, 0, 1),
+	[F_TUNE_USB2_HS_COMP_CUR] = REG_FIELD(EUSB2_TUNE_USB2_HS_COMP_CUR, 0, 1),
 	[F_TUNE_USB2_PREEM] = REG_FIELD(EUSB2_TUNE_USB2_PREEM, 0, 2),
+	[F_TUNE_USB2_EQU] = REG_FIELD(EUSB2_TUNE_USB2_EQU, 0, 1),
+	[F_TUNE_USB2_SLEW] = REG_FIELD(EUSB2_TUNE_USB2_SLEW, 0, 1),
 	[F_TUNE_SQUELCH_U] = REG_FIELD(EUSB2_TUNE_SQUELCH_U, 0, 2),
+	[F_TUNE_HSDISC] = REG_FIELD(EUSB2_TUNE_HSDISC, 0, 2),
+	[F_TUNE_RES_FSDIF] = REG_FIELD(EUSB2_TUNE_RES_FSDIF, 0, 2),
 	[F_TUNE_IUSB2] = REG_FIELD(EUSB2_TUNE_IUSB2, 0, 3),
+	[F_TUNE_USB2_CROSSOVER] = REG_FIELD(EUSB2_TUNE_USB2_CROSSOVER, 0, 2),
 
 	[F_FORCE_VAL_5] = REG_FIELD(EUSB2_FORCE_VAL_5, 0, 7),
 	[F_FORCE_EN_5] = REG_FIELD(EUSB2_FORCE_EN_5, 0, 7),
@@ -63,13 +90,8 @@ static struct reg_field eusb2_repeater_tune_reg_fields[F_NUM_FIELDS] = {
 	[F_RPTR_STATUS] = REG_FIELD(EUSB2_RPTR_STATUS, 0, 7),
 };
 
-struct eusb2_repeater_init_tbl {
-	unsigned int reg;
-	unsigned int val;
-};
-
 struct eusb2_repeater_cfg {
-	const struct eusb2_repeater_init_tbl *init_tbl;
+	const u32 *init_tbl;
 	int init_tbl_num;
 	const char * const *vreg_list;
 	int num_vregs;
@@ -88,10 +110,10 @@ static const char * const pm8550b_vreg_l[] = {
 	"vdd18", "vdd3",
 };
 
-static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = {
-	QCOM_EUSB2_REPEATER_INIT_CFG(F_TUNE_IUSB2, 0x8),
-	QCOM_EUSB2_REPEATER_INIT_CFG(F_TUNE_SQUELCH_U, 0x3),
-	QCOM_EUSB2_REPEATER_INIT_CFG(F_TUNE_USB2_PREEM, 0x5),
+static const u32 pm8550b_init_tbl[F_NUM_TUNE_FIELDS] = {
+	[F_TUNE_IUSB2] = 0x8,
+	[F_TUNE_SQUELCH_U] = 0x3,
+	[F_TUNE_USB2_PREEM] = 0x5,
 };
 
 static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
@@ -119,8 +141,9 @@ static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
 
 static int eusb2_repeater_init(struct phy *phy)
 {
+	struct reg_field *regfields = eusb2_repeater_tune_reg_fields;
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
-	const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl;
+	const u32 *init_tbl = rptr->cfg->init_tbl;
 	u32 val;
 	int ret;
 	int i;
@@ -131,9 +154,16 @@ static int eusb2_repeater_init(struct phy *phy)
 
 	regmap_field_update_bits(rptr->regs[F_EN_CTL1], EUSB2_RPTR_EN, EUSB2_RPTR_EN);
 
-	for (i = 0; i < rptr->cfg->init_tbl_num; i++)
-		regmap_field_update_bits(rptr->regs[init_tbl[i].reg],
-					 init_tbl[i].val, init_tbl[i].val);
+	for (i = 0; i < F_NUM_TUNE_FIELDS; i++) {
+		if (init_tbl[i]) {
+			regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]);
+		} else {
+			/* Write 0 if there's no value set */
+			u32 mask = GENMASK(regfields[i].msb, regfields[i].lsb);
+
+			regmap_field_update_bits(rptr->regs[i], mask, 0);
+		}
+	}
 
 	ret = regmap_field_read_poll_timeout(rptr->regs[F_RPTR_STATUS],
 					     val, val & RPTR_OK, 10, 5);
-- 
2.42.0

[PATCH AUTOSEL 6.5 07/18] usb: dwc3: core: configure TX/RX threshold for DWC3_IP

[Sasha Levin]

From: Stanley Chang <stanley_chang@realtek.com>

[ Upstream commit e72fc8d6a12af7ae8dd1b52cf68ed68569d29f80 ]

In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.

In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.

Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230912041904.30721-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 160 +++++++++++++++++++++++++++++++---------
 drivers/usb/dwc3/core.h |  13 ++++
 2 files changed, 137 insertions(+), 36 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 343d2570189ff..d25490965b27f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1094,6 +1094,111 @@ static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
 	}
 }
 
+static void dwc3_config_threshold(struct dwc3 *dwc)
+{
+	u32 reg;
+	u8 rx_thr_num;
+	u8 rx_maxburst;
+	u8 tx_thr_num;
+	u8 tx_maxburst;
+
+	/*
+	 * Must config both number of packets and max burst settings to enable
+	 * RX and/or TX threshold.
+	 */
+	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
+		rx_thr_num = dwc->rx_thr_num_pkt_prd;
+		rx_maxburst = dwc->rx_max_burst_prd;
+		tx_thr_num = dwc->tx_thr_num_pkt_prd;
+		tx_maxburst = dwc->tx_max_burst_prd;
+
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
+
+			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
+
+			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+
+	rx_thr_num = dwc->rx_thr_num_pkt;
+	rx_maxburst = dwc->rx_max_burst;
+	tx_thr_num = dwc->tx_thr_num_pkt;
+	tx_maxburst = dwc->tx_max_burst;
+
+	if (DWC3_IP_IS(DWC3)) {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	} else {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+}
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -1246,42 +1351,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
-	/*
-	 * Must config both number of packets and max burst settings to enable
-	 * RX and/or TX threshold.
-	 */
-	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
-		u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
-		u8 rx_maxburst = dwc->rx_max_burst_prd;
-		u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
-		u8 tx_maxburst = dwc->tx_max_burst_prd;
-
-		if (rx_thr_num && rx_maxburst) {
-			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
-			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
-
-			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
-			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
-
-			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
-			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
-
-			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
-		}
-
-		if (tx_thr_num && tx_maxburst) {
-			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
-			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
-
-			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
-			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
-
-			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
-			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
-
-			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
-		}
-	}
+	dwc3_config_threshold(dwc);
 
 	return 0;
 
@@ -1417,6 +1487,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt = 0;
+	u8			rx_max_burst = 0;
+	u8			tx_thr_num_pkt = 0;
+	u8			tx_max_burst = 0;
 	u8			rx_thr_num_pkt_prd = 0;
 	u8			rx_max_burst_prd = 0;
 	u8			tx_thr_num_pkt_prd = 0;
@@ -1479,6 +1553,14 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,usb2-lpm-disable");
 	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
 				"snps,usb2-gadget-lpm-disable");
+	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
+				&rx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,rx-max-burst",
+				&rx_max_burst);
+	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
+				&tx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,tx-max-burst",
+				&tx_max_burst);
 	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
 				&rx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,rx-max-burst-prd",
@@ -1560,6 +1642,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->hird_threshold = hird_threshold;
 
+	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
+	dwc->rx_max_burst = rx_max_burst;
+
+	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
+	dwc->tx_max_burst = tx_max_burst;
+
 	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
 	dwc->rx_max_burst_prd = rx_max_burst_prd;
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a69ac67d89fe6..6782ec8bfd64c 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -211,6 +211,11 @@
 #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
 #define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
 
+/* Global TX Threshold Configuration Register */
+#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
+#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
+
 /* Global RX Threshold Configuration Register for DWC_usb31 only */
 #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
 #define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
@@ -1045,6 +1050,10 @@ struct dwc3_scratchpad_array {
  * @test_mode_nr: test feature selector
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
+ * @rx_thr_num_pkt: USB receive packet count
+ * @rx_max_burst: max USB receive burst size
+ * @tx_thr_num_pkt: USB transmit packet count
+ * @tx_max_burst: max USB transmit burst size
  * @rx_thr_num_pkt_prd: periodic ESS receive packet count
  * @rx_max_burst_prd: max periodic ESS receive burst size
  * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
@@ -1273,6 +1282,10 @@ struct dwc3 {
 	u8			test_mode_nr;
 	u8			lpm_nyet_threshold;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt;
+	u8			rx_max_burst;
+	u8			tx_thr_num_pkt;
+	u8			tx_max_burst;
 	u8			rx_thr_num_pkt_prd;
 	u8			rx_max_burst_prd;
 	u8			tx_thr_num_pkt_prd;
-- 
2.42.0

[PATCH AUTOSEL 6.5 08/18] usb: pci-quirks: group AMD specific quirk code together

[Sasha Levin]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit 7ca9f9ba8aa7380dee5dd8346b57bbaf198b075a ]

A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD
quirk and adding its compile time dependency on HAS_IOPORT. In order to
minimize the number of #ifdefs in C files and make that patch easier
to read first group the code together. This is pure code movement
no functional change is intended.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-2-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/pci-quirks.c | 119 +++++++++++++++++-----------------
 drivers/usb/host/pci-quirks.h |  14 ++--
 2 files changed, 68 insertions(+), 65 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9addf..5e06fad82a228 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,22 @@
 #define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
 #define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
 
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
+#define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
+
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -93,21 +109,6 @@
 #define	NB_PIF0_PWRDOWN_0	0x01100012
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
-#define USB_INTEL_XUSB2PR      0xD0
-#define USB_INTEL_USB2PRM      0xD4
-#define USB_INTEL_USB3_PSSEN   0xD8
-#define USB_INTEL_USB3PRM      0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG	0xF8
-#define ASMT_DATA_WRITE1_REG	0xFC
-#define ASMT_CONTROL_REG	0xE0
-#define ASMT_CONTROL_WRITE_BIT	0x02
-#define ASMT_WRITEREG_CMD	0x10423
-#define ASMT_FLOWCTL_ADDR	0xFA30
-#define ASMT_FLOWCTL_DATA	0xBA
-#define ASMT_PSEUDO_DATA	0
-
 /*
  * amd_chipset_gen values represent AMD different chipset generations
  */
@@ -458,50 +459,6 @@ void usb_amd_quirk_pll_disable(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
 
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
-	unsigned long retry_count;
-	unsigned char value;
-
-	for (retry_count = 1000; retry_count > 0; --retry_count) {
-
-		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
-		if (value == 0xff) {
-			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
-			return -EIO;
-		}
-
-		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
-			return 0;
-
-		udelay(50);
-	}
-
-	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
-	return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send command and address to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send data to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
 void usb_amd_quirk_pll_enable(void)
 {
 	usb_amd_quirk_pll(0);
@@ -631,6 +588,50 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
 
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		udelay(50);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7a..cde2263a9d2e4 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -3,8 +3,6 @@
 #define __LINUX_USB_PCI_QUIRKS_H
 
 #ifdef CONFIG_USB_PCI
-void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
@@ -12,23 +10,27 @@ void usb_amd_dev_put(void);
 bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
+void sb800_prefetch(struct device *dev, int on);
+bool usb_amd_pt_check_port(struct device *device, int port);
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
 void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
-void sb800_prefetch(struct device *dev, int on);
-bool usb_amd_pt_check_port(struct device *device, int port);
 #else
 struct pci_dev;
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 static inline void sb800_prefetch(struct device *dev, int on) {}
 static inline bool usb_amd_pt_check_port(struct device *device, int port)
 {
 	return false;
 }
+
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
-- 
2.42.0

[PATCH AUTOSEL 6.5 09/18] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk

[Sasha Levin]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit 52e24f8c0a102ac76649c6b71224fadcc82bd5da ]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. In the pci-quirks case the I/O port acceses are
used in the quirks for several AMD south bridges, Add a config option
for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/Kconfig           | 10 ++++++++++
 drivers/usb/core/hcd-pci.c    |  3 +--
 drivers/usb/host/pci-quirks.c |  2 ++
 drivers/usb/host/pci-quirks.h | 30 ++++++++++++++++++++++--------
 include/linux/usb/hcd.h       | 17 +++++++++++++++++
 5 files changed, 52 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7f33bcc315f27..abf8c6cdea9ea 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -91,6 +91,16 @@ config USB_PCI
 	  If you have such a device you may say N here and PCI related code
 	  will not be built in the USB driver.
 
+config USB_PCI_AMD
+	bool "AMD PCI USB host support"
+	depends on USB_PCI && HAS_IOPORT
+	default X86 || MACH_LOONGSON64 || PPC_PASEMI
+	help
+	  Enable workarounds for USB implementation quirks in SB600/SB700/SB800
+	  and later south bridge implementations. These are common on x86 PCs
+	  with AMD CPUs but rarely used elsewhere, with the exception of a few
+	  powerpc and mips desktop machines.
+
 if USB
 
 source "drivers/usb/core/Kconfig"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 990280688b254..ee3156f495338 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
 		goto free_irq_vectors;
 	}
 
-	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
-			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+	hcd->amd_resume_bug = usb_hcd_amd_resume_bug(dev, driver);
 
 	if (driver->flags & HCD_MEMORY) {
 		/* EHCI, OHCI */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 5e06fad82a228..10813096d00c6 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -76,6 +76,7 @@
 #define USB_INTEL_USB3_PSSEN   0xD8
 #define USB_INTEL_USB3PRM      0xDC
 
+#ifdef CONFIG_USB_PCI_AMD
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -587,6 +588,7 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 	return !(value & BIT(port_shift));
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif /* CONFIG_USB_PCI_AMD */
 
 static int usb_asmedia_wait_write(struct pci_dev *pdev)
 {
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index cde2263a9d2e4..a5230b0b9e913 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,7 +2,7 @@
 #ifndef __LINUX_USB_PCI_QUIRKS_H
 #define __LINUX_USB_PCI_QUIRKS_H
 
-#ifdef CONFIG_USB_PCI
+#ifdef CONFIG_USB_PCI_AMD
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
@@ -12,23 +12,37 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 void sb800_prefetch(struct device *dev, int on);
 bool usb_amd_pt_check_port(struct device *device, int port);
-
-void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+	return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+	return false;
+}
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+	return false;
+}
 static inline void sb800_prefetch(struct device *dev, int on) {}
 static inline bool usb_amd_pt_check_port(struct device *device, int port)
 {
 	return false;
 }
+#endif /* CONFIG_USB_PCI_AMD */
 
+#ifdef CONFIG_USB_PCI
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+struct pci_dev;
 static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 4e9623e8492b3..e1d6fc7e6932f 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -486,8 +486,25 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev,
 extern void usb_hcd_pci_remove(struct pci_dev *dev);
 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
 
+#ifdef CONFIG_USB_PCI_AMD
 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
 
+static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
+					  const struct hc_driver *driver)
+{
+	if (!usb_hcd_amd_remote_wakeup_quirk(dev))
+		return false;
+	if (driver->flags & (HCD_USB11 | HCD_USB3))
+		return true;
+	return false;
+}
+#else /* CONFIG_USB_PCI_AMD */
+static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
+					  const struct hc_driver *driver)
+{
+	return false;
+}
+#endif
 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif /* CONFIG_USB_PCI */
 
-- 
2.42.0

[PATCH AUTOSEL 6.5 10/18] usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff

[Sasha Levin]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit 358ad297e379ff548247e3e24c6619559942bfdd ]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. With the AMD quirk handled USB PCI quirks still use
inw() in uhci_check_and_reset_hc() and thus indirectly in
quirk_usb_handoff_uhci(). Handle this by conditionally compiling
uhci_check_and_reset_hc() and stubbing out quirk_usb_handoff_uhci() when
HAS_IOPORT is not available.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-4-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/pci-quirks.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 10813096d00c6..1f9c1b1435d86 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -634,6 +634,16 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
 
+static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+{
+	u16 cmd;
+
+	return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
+}
+
+#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
+
+#if defined(CONFIG_HAS_IOPORT) && IS_ENABLED(CONFIG_USB_UHCI_HCD)
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
@@ -715,14 +725,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
 }
 EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
 
-static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
-{
-	u16 cmd;
-	return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
-}
-
 #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
-#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
 
 static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 {
@@ -742,6 +745,12 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 		uhci_check_and_reset_hc(pdev, base);
 }
 
+#else /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
+
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev) {}
+
+#endif /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
+
 static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
 {
 	return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
-- 
2.42.0

[PATCH AUTOSEL 6.5 11/18] usb: ucsi: glink: use the connector orientation GPIO to provide switch events

[Sasha Levin]

From: Neil Armstrong <neil.armstrong@linaro.org>

[ Upstream commit c6165ed2f425c273244191930a47c8be23bc51bd ]

On SM8550, the non-altmode orientation is not given anymore within
altmode events, even with USB SVIDs events.

On the other side, the Type-C connector orientation is correctly
reported by a signal from the PMIC.

Take this gpio signal when we detect some Type-C port activity
to notify any Type-C switches tied to the Type-C port connectors.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231002-topic-sm8550-upstream-type-c-orientation-v2-2-125410d3ff95@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 54 ++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index 1fe9cb5b6bd96..a2d862eebcecb 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -9,9 +9,13 @@
 #include <linux/mutex.h>
 #include <linux/property.h>
 #include <linux/soc/qcom/pdr.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/gpio/consumer.h>
 #include <linux/soc/qcom/pmic_glink.h>
 #include "ucsi.h"
 
+#define PMIC_GLINK_MAX_PORTS	2
+
 #define UCSI_BUF_SIZE                   48
 
 #define MSG_TYPE_REQ_RESP               1
@@ -53,6 +57,9 @@ struct ucsi_notify_ind_msg {
 struct pmic_glink_ucsi {
 	struct device *dev;
 
+	struct gpio_desc *port_orientation[PMIC_GLINK_MAX_PORTS];
+	struct typec_switch *port_switch[PMIC_GLINK_MAX_PORTS];
+
 	struct pmic_glink_client *client;
 
 	struct ucsi *ucsi;
@@ -221,8 +228,20 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 	}
 
 	con_num = UCSI_CCI_CONNECTOR(cci);
-	if (con_num)
+	if (con_num) {
+		if (con_num < PMIC_GLINK_MAX_PORTS &&
+		    ucsi->port_orientation[con_num - 1]) {
+			int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]);
+
+			if (orientation >= 0) {
+				typec_switch_set(ucsi->port_switch[con_num - 1],
+						 orientation ? TYPEC_ORIENTATION_REVERSE
+							     : TYPEC_ORIENTATION_NORMAL);
+			}
+		}
+
 		ucsi_connector_change(ucsi->ucsi, con_num);
+	}
 
 	if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
 		ucsi->sync_val = -EBUSY;
@@ -283,6 +302,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 {
 	struct pmic_glink_ucsi *ucsi;
 	struct device *dev = &adev->dev;
+	struct fwnode_handle *fwnode;
 	int ret;
 
 	ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL);
@@ -310,6 +330,38 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 
 	ucsi_set_drvdata(ucsi->ucsi, ucsi);
 
+	device_for_each_child_node(dev, fwnode) {
+		struct gpio_desc *desc;
+		u32 port;
+
+		ret = fwnode_property_read_u32(fwnode, "reg", &port);
+		if (ret < 0) {
+			dev_err(dev, "missing reg property of %pOFn\n", fwnode);
+			return ret;
+		}
+
+		if (port >= PMIC_GLINK_MAX_PORTS) {
+			dev_warn(dev, "invalid connector number, ignoring\n");
+			continue;
+		}
+
+		desc = devm_gpiod_get_index_optional(&adev->dev, "orientation", port, GPIOD_IN);
+
+		/* If GPIO isn't found, continue */
+		if (!desc)
+			continue;
+
+		if (IS_ERR(desc))
+			return dev_err_probe(dev, PTR_ERR(desc),
+					     "unable to acquire orientation gpio\n");
+		ucsi->port_orientation[port] = desc;
+
+		ucsi->port_switch[port] = fwnode_typec_switch_get(fwnode);
+		if (IS_ERR(ucsi->port_switch[port]))
+			return dev_err_probe(dev, PTR_ERR(ucsi->port_switch[port]),
+					"failed to acquire orientation-switch\n");
+	}
+
 	ucsi->client = devm_pmic_glink_register_client(dev,
 						       PMIC_GLINK_OWNER_USBC,
 						       pmic_glink_ucsi_callback,
-- 
2.42.0

[PATCH AUTOSEL 6.5 12/18] soundwire: dmi-quirks: update HP Omen match

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 4ea2b6d3128ea4d502c4015df0dc16b7d1070954 ]

New platforms have a slightly different DMI product name, remove
trailing characters/digits to handle all cases

Closes: https://github.com/thesofproject/linux/issues/4611
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231013010833.114271-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/dmi-quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c
index 2a1096dab63d3..9ebdd0cd0b1cf 100644
--- a/drivers/soundwire/dmi-quirks.c
+++ b/drivers/soundwire/dmi-quirks.c
@@ -141,7 +141,7 @@ static const struct dmi_system_id adr_remap_quirk_table[] = {
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16-k0xxx"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16"),
 		},
 		.driver_data = (void *)hp_omen_16,
 	},
-- 
2.42.0

[PATCH AUTOSEL 6.5 13/18] f2fs: fix error path of __f2fs_build_free_nids

[Sasha Levin]

From: Zhiguo Niu <zhiguo.niu@unisoc.com>

[ Upstream commit a5e80e18f268ea7c7a36bc4159de0deb3b5a2171 ]

If NAT is corrupted, let scan_nat_page() return EFSCORRUPTED, so that,
caller can set SBI_NEED_FSCK flag into checkpoint for later repair by
fsck.

Also, this patch introduces a new fscorrupted error flag, and in above
scenario, it will persist the error flag into superblock synchronously
to avoid it has no luck to trigger a checkpoint to record SBI_NEED_FSCK

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/node.c          | 11 +++++++++--
 include/linux/f2fs_fs.h |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index ee2e1dd64f256..248764badcde8 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -2389,7 +2389,7 @@ static int scan_nat_page(struct f2fs_sb_info *sbi,
 		blk_addr = le32_to_cpu(nat_blk->entries[i].block_addr);
 
 		if (blk_addr == NEW_ADDR)
-			return -EINVAL;
+			return -EFSCORRUPTED;
 
 		if (blk_addr == NULL_ADDR) {
 			add_free_nid(sbi, start_nid, true, true);
@@ -2504,7 +2504,14 @@ static int __f2fs_build_free_nids(struct f2fs_sb_info *sbi,
 
 			if (ret) {
 				f2fs_up_read(&nm_i->nat_tree_lock);
-				f2fs_err(sbi, "NAT is corrupt, run fsck to fix it");
+
+				if (ret == -EFSCORRUPTED) {
+					f2fs_err(sbi, "NAT is corrupt, run fsck to fix it");
+					set_sbi_flag(sbi, SBI_NEED_FSCK);
+					f2fs_handle_error(sbi,
+						ERROR_INCONSISTENT_NAT);
+				}
+
 				return ret;
 			}
 		}
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index a82a4bb6ce68b..cf1adceb02697 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -104,6 +104,7 @@ enum f2fs_error {
 	ERROR_CORRUPTED_VERITY_XATTR,
 	ERROR_CORRUPTED_XATTR,
 	ERROR_INVALID_NODE_REFERENCE,
+	ERROR_INCONSISTENT_NAT,
 	ERROR_MAX,
 };
 
-- 
2.42.0

[PATCH AUTOSEL 6.5 14/18] f2fs: fix error handling of __get_node_page

[Sasha Levin]

From: Zhiguo Niu <zhiguo.niu@unisoc.com>

[ Upstream commit 9b4c8dd99fe48721410741651d426015e03a4b7a ]

Use f2fs_handle_error to record inconsistent node block error
and return -EFSCORRUPTED instead of -EINVAL.

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/node.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 248764badcde8..ed963c56ac32a 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -1467,7 +1467,8 @@ static struct page *__get_node_page(struct f2fs_sb_info *sbi, pgoff_t nid,
 			  ofs_of_node(page), cpver_of_node(page),
 			  next_blkaddr_of_node(page));
 	set_sbi_flag(sbi, SBI_NEED_FSCK);
-	err = -EINVAL;
+	f2fs_handle_error(sbi, ERROR_INCONSISTENT_FOOTER);
+	err = -EFSCORRUPTED;
 out_err:
 	ClearPageUptodate(page);
 out_put_err:
-- 
2.42.0

[PATCH AUTOSEL 6.5 15/18] usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present

[Sasha Levin]

From: Wesley Cheng <quic_wcheng@quicinc.com>

[ Upstream commit 6add6dd345cb754ce18ff992c7264cabf31e59f6 ]

There is a 120ms delay implemented for allowing the XHCI host controller to
detect a U3 wakeup pulse.  The intention is to wait for the device to retry
the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status
by the time it is checked.  As per the USB3 specification:

  tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts")

This would allow the XHCI resume sequence to determine if the root hub
needs to be also resumed.  However, in case there is no device connected,
or if there is only a HSUSB device connected, this delay would still affect
the overall resume timing.

Since this delay is solely for detecting U3 wake events (USB3 specific)
then ignore this delay for the disconnected case and the HSUSB connected
only case.

[skip helper function, rename usb3_connected variable -Mathias ]

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fae994f679d45..82aab2f9adbb8 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -968,6 +968,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 	int			retval = 0;
 	bool			comp_timer_running = false;
 	bool			pending_portevent = false;
+	bool			suspended_usb3_devs = false;
 	bool			reinit_xhc = false;
 
 	if (!hcd->state)
@@ -1115,10 +1116,17 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 		/*
 		 * Resume roothubs only if there are pending events.
 		 * USB 3 devices resend U3 LFPS wake after a 100ms delay if
-		 * the first wake signalling failed, give it that chance.
+		 * the first wake signalling failed, give it that chance if
+		 * there are suspended USB 3 devices.
 		 */
+		if (xhci->usb3_rhub.bus_state.suspended_ports ||
+		    xhci->usb3_rhub.bus_state.bus_suspended)
+			suspended_usb3_devs = true;
+
 		pending_portevent = xhci_pending_portevent(xhci);
-		if (!pending_portevent && msg.event == PM_EVENT_AUTO_RESUME) {
+
+		if (suspended_usb3_devs && !pending_portevent &&
+		    msg.event == PM_EVENT_AUTO_RESUME) {
 			msleep(120);
 			pending_portevent = xhci_pending_portevent(xhci);
 		}
-- 
2.42.0

[PATCH AUTOSEL 6.5 16/18] usb: gadget: f_ncm: Always set current gadget in ncm_bind()

[Sasha Levin]

From: Hardik Gajjar <hgajjar@de.adit-jv.com>

[ Upstream commit a04224da1f3424b2c607b12a3bd1f0e302fb8231 ]

Previously, gadget assignment to the net device occurred exclusively
during the initial binding attempt.

Nevertheless, the gadget pointer could change during bind/unbind
cycles due to various conditions, including the unloading/loading
of the UDC device driver or the detachment/reconnection of an
OTG-capable USB hub device.

This patch relocates the gether_set_gadget() function out from
ncm_opts->bound condition check, ensuring that the correct gadget
is assigned during each bind request.

The provided logs demonstrate the consistency of ncm_opts throughout
the power cycle, while the gadget may change.

* OTG hub connected during boot up and assignment of gadget and
  ncm_opts pointer

[    2.366301] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105
[    2.366304] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.366306] usb 2-1.5: Product: H2H Bridge
[    2.366308] usb 2-1.5: Manufacturer: Aptiv
[    2.366309] usb 2-1.5: SerialNumber: 13FEB2021
[    2.427989] usb 2-1.5: New USB device found, VID=2996, PID=0105
[    2.428959] dabridge 2-1.5:1.0: dabridge 2-4 total endpoints=5, 0000000093a8d681
[    2.429710] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[    2.429714] dabridge 2-1.5:1.0: Hub 2-2 P(0151) V(06.87)
[    2.429956] dabridge 2-1.5:1.0: All downstream ports in host mode

[    2.430093] gadget 000000003c414d59 ------> gadget pointer

* NCM opts and associated gadget pointer during First ncm_bind

[   34.763929] NCM opts 00000000aa304ac9
[   34.763930] NCM gadget 000000003c414d59

* OTG capable hub disconnecte or assume driver unload.

[   97.203114] usb 2-1: USB disconnect, device number 2
[   97.203118] usb 2-1.1: USB disconnect, device number 3
[   97.209217] usb 2-1.5: USB disconnect, device number 4
[   97.230990] dabr_udc deleted

* Reconnect the OTG hub or load driver assaign new gadget pointer.

[  111.534035] usb 2-1.1: New USB device found, idVendor=2996, idProduct=0120, bcdDevice= 6.87
[  111.534038] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.534040] usb 2-1.1: Product: Vendor
[  111.534041] usb 2-1.1: Manufacturer: Aptiv
[  111.534042] usb 2-1.1: SerialNumber: Superior
[  111.535175] usb 2-1.1: New USB device found, VID=2996, PID=0120
[  111.610995] usb 2-1.5: new high-speed USB device number 8 using xhci-hcd
[  111.630052] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105, bcdDevice=21.02
[  111.630055] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.630057] usb 2-1.5: Product: H2H Bridge
[  111.630058] usb 2-1.5: Manufacturer: Aptiv
[  111.630059] usb 2-1.5: SerialNumber: 13FEB2021
[  111.687464] usb 2-1.5: New USB device found, VID=2996, PID=0105
[  111.690375] dabridge 2-1.5:1.0: dabridge 2-8 total endpoints=5, 000000000d87c961
[  111.691172] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[  111.691176] dabridge 2-1.5:1.0: Hub 2-6 P(0151) V(06.87)
[  111.691646] dabridge 2-1.5:1.0: All downstream ports in host mode

[  111.692298] gadget 00000000dc72f7a9 --------> new gadget ptr on connect

* NCM opts and associated gadget pointer during second ncm_bind

[  113.271786] NCM opts 00000000aa304ac9 -----> same opts ptr used during first bind
[  113.271788] NCM gadget 00000000dc72f7a9 ----> however new gaget ptr, that will not set
                                                 in net_device due to ncm_opts->bound = true

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Link: https://lore.kernel.org/r/20231020153324.82794-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_ncm.c | 27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index faf90a2174194..bbb6ff6b11aa1 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1425,7 +1425,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_ncm		*ncm = func_to_ncm(f);
 	struct usb_string	*us;
-	int			status;
+	int			status = 0;
 	struct usb_ep		*ep;
 	struct f_ncm_opts	*ncm_opts;
 
@@ -1443,22 +1443,17 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
 		f->os_desc_table[0].os_desc = &ncm_opts->ncm_os_desc;
 	}
 
-	/*
-	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
-	 * configurations are bound in sequence with list_for_each_entry,
-	 * in each configuration its functions are bound in sequence
-	 * with list_for_each_entry, so we assume no race condition
-	 * with regard to ncm_opts->bound access
-	 */
-	if (!ncm_opts->bound) {
-		mutex_lock(&ncm_opts->lock);
-		gether_set_gadget(ncm_opts->net, cdev->gadget);
+	mutex_lock(&ncm_opts->lock);
+	gether_set_gadget(ncm_opts->net, cdev->gadget);
+	if (!ncm_opts->bound)
 		status = gether_register_netdev(ncm_opts->net);
-		mutex_unlock(&ncm_opts->lock);
-		if (status)
-			goto fail;
-		ncm_opts->bound = true;
-	}
+	mutex_unlock(&ncm_opts->lock);
+
+	if (status)
+		goto fail;
+
+	ncm_opts->bound = true;
+
 	us = usb_gstrings_attach(cdev, ncm_strings,
 				 ARRAY_SIZE(ncm_string_defs));
 	if (IS_ERR(us)) {
-- 
2.42.0

[PATCH AUTOSEL 6.5 17/18] 9p/trans_fd: Annotate data-racy writes to file::f_flags

[Sasha Levin]

From: Marco Elver <elver@google.com>

[ Upstream commit 355f074609dbf3042900ea9d30fcd2b0c323a365 ]

syzbot reported:

 | BUG: KCSAN: data-race in p9_fd_create / p9_fd_create
 |
 | read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0:
 |  p9_fd_open net/9p/trans_fd.c:842 [inline]
 |  p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
 |  p9_client_create+0x595/0xa70 net/9p/client.c:1010
 |  v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
 |  v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
 |  legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
 |  vfs_get_tree+0x51/0x190 fs/super.c:1519
 |  do_new_mount+0x203/0x660 fs/namespace.c:3335
 |  path_mount+0x496/0xb30 fs/namespace.c:3662
 |  do_mount fs/namespace.c:3675 [inline]
 |  __do_sys_mount fs/namespace.c:3884 [inline]
 |  [...]
 |
 | read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1:
 |  p9_fd_open net/9p/trans_fd.c:842 [inline]
 |  p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
 |  p9_client_create+0x595/0xa70 net/9p/client.c:1010
 |  v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
 |  v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
 |  legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
 |  vfs_get_tree+0x51/0x190 fs/super.c:1519
 |  do_new_mount+0x203/0x660 fs/namespace.c:3335
 |  path_mount+0x496/0xb30 fs/namespace.c:3662
 |  do_mount fs/namespace.c:3675 [inline]
 |  __do_sys_mount fs/namespace.c:3884 [inline]
 |  [...]
 |
 | value changed: 0x00008002 -> 0x00008802

Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and
write files. This may happen concurrently if e.g. mounting process
modifies the fd in another thread.

Mark the plain read-modify-writes as intentional data-races, with the
assumption that the result of executing the accesses concurrently will
always result in the same result despite the accesses themselves not
being atomic.

Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Message-ID: <20231025103445.1248103-1-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_fd.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 00b684616e8d9..9374790f17ce4 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -832,14 +832,21 @@ static int p9_fd_open(struct p9_client *client, int rfd, int wfd)
 		goto out_free_ts;
 	if (!(ts->rd->f_mode & FMODE_READ))
 		goto out_put_rd;
-	/* prevent workers from hanging on IO when fd is a pipe */
-	ts->rd->f_flags |= O_NONBLOCK;
+	/* Prevent workers from hanging on IO when fd is a pipe.
+	 * It's technically possible for userspace or concurrent mounts to
+	 * modify this flag concurrently, which will likely result in a
+	 * broken filesystem. However, just having bad flags here should
+	 * not crash the kernel or cause any other sort of bug, so mark this
+	 * particular data race as intentional so that tooling (like KCSAN)
+	 * can allow it and detect further problems.
+	 */
+	data_race(ts->rd->f_flags |= O_NONBLOCK);
 	ts->wr = fget(wfd);
 	if (!ts->wr)
 		goto out_put_rd;
 	if (!(ts->wr->f_mode & FMODE_WRITE))
 		goto out_put_wr;
-	ts->wr->f_flags |= O_NONBLOCK;
+	data_race(ts->wr->f_flags |= O_NONBLOCK);
 
 	client->trans = ts;
 	client->status = Connected;
-- 
2.42.0

[PATCH AUTOSEL 6.5 18/18] 9p: v9fs_listxattr: fix %s null argument warning

[Sasha Levin]

From: Dominique Martinet <asmadeus@codewreck.org>

[ Upstream commit 9b5c6281838fc84683dd99b47302d81fce399918 ]

W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
    inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
   55 |  _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use an empty string instead of :
 - this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
 - since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")

Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com
Suggested-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20231025103445.1248103-2-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/xattr.c   | 5 +++--
 net/9p/client.c | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/9p/xattr.c b/fs/9p/xattr.c
index e00cf8109b3f3..3c4572ef3a488 100644
--- a/fs/9p/xattr.c
+++ b/fs/9p/xattr.c
@@ -68,7 +68,7 @@ ssize_t v9fs_xattr_get(struct dentry *dentry, const char *name,
 	struct p9_fid *fid;
 	int ret;
 
-	p9_debug(P9_DEBUG_VFS, "name = %s value_len = %zu\n",
+	p9_debug(P9_DEBUG_VFS, "name = '%s' value_len = %zu\n",
 		 name, buffer_size);
 	fid = v9fs_fid_lookup(dentry);
 	if (IS_ERR(fid))
@@ -139,7 +139,8 @@ int v9fs_fid_xattr_set(struct p9_fid *fid, const char *name,
 
 ssize_t v9fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size)
 {
-	return v9fs_xattr_get(dentry, NULL, buffer, buffer_size);
+	/* Txattrwalk with an empty string lists xattrs instead */
+	return v9fs_xattr_get(dentry, "", buffer, buffer_size);
 }
 
 static int v9fs_xattr_handler_get(const struct xattr_handler *handler,
diff --git a/net/9p/client.c b/net/9p/client.c
index 86bbc7147fc14..9c2bc15e3cfaf 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -1979,7 +1979,7 @@ struct p9_fid *p9_client_xattrwalk(struct p9_fid *file_fid,
 		goto error;
 	}
 	p9_debug(P9_DEBUG_9P,
-		 ">>> TXATTRWALK file_fid %d, attr_fid %d name %s\n",
+		 ">>> TXATTRWALK file_fid %d, attr_fid %d name '%s'\n",
 		 file_fid->fid, attr_fid->fid, attr_name);
 
 	req = p9_client_rpc(clnt, P9_TXATTRWALK, "dds",
-- 
2.42.0