[PATCH RFC v5 0/7] Add FS035VG158 panel

[PATCH RFC v5 0/7] Add FS035VG158 panel

[John Watts]

Hello there,

This RFC introduces support for the FS035VG158 LCD panel, cleaning up
the nv3052c driver on the way and documentating existing panel code.

This revision is mostly a resend and ask for more feedback.
I have tested that it works on next-20231208.

John.

v4 -> v5:
- Add Reviewed-By trailers

v3 -> v4:
- Mark panel_regs_len as unsigned

v2 -> v3:
- Dropped patches that add extra sleep time

v1 -> v2:
- Fixed a variable declaration style error
- Cleaned up device tree yaml

---
John Watts (7):
      drm/panel: nv3052c: Document known register names
      drm/panel: nv3052c: Add SPI device IDs
      drm/panel: nv3052c: Allow specifying registers per panel
      drm/panel: nv3052c: Add Fascontek FS035VG158 LCD display
      dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties
      dt-bindings: vendor-prefixes: Add fascontek
      dt-bindings: display: panel: add Fascontek FS035VG158 panel

 .../display/panel/fascontek,fs035vg158.yaml        |  56 +++
 .../display/panel/leadtek,ltk035c5444t.yaml        |   8 +-
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 drivers/gpu/drm/panel/panel-newvision-nv3052c.c    | 515 +++++++++++++++------
 4 files changed, 437 insertions(+), 144 deletions(-)
---
base-commit: bc63de6e6ba0b16652c5fb4b9c9916b9e7ca1f23
change-id: 20231210-fs035vg158-57953382edb6

Best regards,
-- 
John Watts <contact@jookia.org>

[PATCH RFC v5 1/7] drm/panel: nv3052c: Document known register names

[John Watts]

Many of these registers have a known name in the public datasheet.
Document them as comments for reference.

Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 261 ++++++++++++------------
 1 file changed, 132 insertions(+), 129 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 71e57de6d8b2..589431523ce7 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -42,9 +42,9 @@ struct nv3052c_reg {
 };
 
 static const struct nv3052c_reg nv3052c_panel_regs[] = {
-	{ 0xff, 0x30 },
-	{ 0xff, 0x52 },
-	{ 0xff, 0x01 },
+	// EXTC Command set enable, select page 1
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
+	// Mostly unknown registers
 	{ 0xe3, 0x00 },
 	{ 0x40, 0x00 },
 	{ 0x03, 0x40 },
@@ -62,15 +62,15 @@ static const struct nv3052c_reg nv3052c_panel_regs[] = {
 	{ 0x25, 0x06 },
 	{ 0x26, 0x14 },
 	{ 0x27, 0x14 },
-	{ 0x38, 0xcc },
-	{ 0x39, 0xd7 },
-	{ 0x3a, 0x4a },
+	{ 0x38, 0xcc }, // VCOM_ADJ1
+	{ 0x39, 0xd7 }, // VCOM_ADJ2
+	{ 0x3a, 0x4a }, // VCOM_ADJ3
 	{ 0x28, 0x40 },
 	{ 0x29, 0x01 },
 	{ 0x2a, 0xdf },
 	{ 0x49, 0x3c },
-	{ 0x91, 0x77 },
-	{ 0x92, 0x77 },
+	{ 0x91, 0x77 }, // EXTPW_CTRL2
+	{ 0x92, 0x77 }, // EXTPW_CTRL3
 	{ 0xa0, 0x55 },
 	{ 0xa1, 0x50 },
 	{ 0xa4, 0x9c },
@@ -94,123 +94,126 @@ static const struct nv3052c_reg nv3052c_panel_regs[] = {
 	{ 0xb8, 0x26 },
 	{ 0xf0, 0x00 },
 	{ 0xf6, 0xc0 },
-	{ 0xff, 0x30 },
-	{ 0xff, 0x52 },
-	{ 0xff, 0x02 },
-	{ 0xb0, 0x0b },
-	{ 0xb1, 0x16 },
-	{ 0xb2, 0x17 },
-	{ 0xb3, 0x2c },
-	{ 0xb4, 0x32 },
-	{ 0xb5, 0x3b },
-	{ 0xb6, 0x29 },
-	{ 0xb7, 0x40 },
-	{ 0xb8, 0x0d },
-	{ 0xb9, 0x05 },
-	{ 0xba, 0x12 },
-	{ 0xbb, 0x10 },
-	{ 0xbc, 0x12 },
-	{ 0xbd, 0x15 },
-	{ 0xbe, 0x19 },
-	{ 0xbf, 0x0e },
-	{ 0xc0, 0x16 },
-	{ 0xc1, 0x0a },
-	{ 0xd0, 0x0c },
-	{ 0xd1, 0x17 },
-	{ 0xd2, 0x14 },
-	{ 0xd3, 0x2e },
-	{ 0xd4, 0x32 },
-	{ 0xd5, 0x3c },
-	{ 0xd6, 0x22 },
-	{ 0xd7, 0x3d },
-	{ 0xd8, 0x0d },
-	{ 0xd9, 0x07 },
-	{ 0xda, 0x13 },
-	{ 0xdb, 0x13 },
-	{ 0xdc, 0x11 },
-	{ 0xdd, 0x15 },
-	{ 0xde, 0x19 },
-	{ 0xdf, 0x10 },
-	{ 0xe0, 0x17 },
-	{ 0xe1, 0x0a },
-	{ 0xff, 0x30 },
-	{ 0xff, 0x52 },
-	{ 0xff, 0x03 },
-	{ 0x00, 0x2a },
-	{ 0x01, 0x2a },
-	{ 0x02, 0x2a },
-	{ 0x03, 0x2a },
-	{ 0x04, 0x61 },
-	{ 0x05, 0x80 },
-	{ 0x06, 0xc7 },
-	{ 0x07, 0x01 },
-	{ 0x08, 0x03 },
-	{ 0x09, 0x04 },
-	{ 0x70, 0x22 },
-	{ 0x71, 0x80 },
-	{ 0x30, 0x2a },
-	{ 0x31, 0x2a },
-	{ 0x32, 0x2a },
-	{ 0x33, 0x2a },
-	{ 0x34, 0x61 },
-	{ 0x35, 0xc5 },
-	{ 0x36, 0x80 },
-	{ 0x37, 0x23 },
-	{ 0x40, 0x03 },
-	{ 0x41, 0x04 },
-	{ 0x42, 0x05 },
-	{ 0x43, 0x06 },
-	{ 0x44, 0x11 },
-	{ 0x45, 0xe8 },
-	{ 0x46, 0xe9 },
-	{ 0x47, 0x11 },
-	{ 0x48, 0xea },
-	{ 0x49, 0xeb },
-	{ 0x50, 0x07 },
-	{ 0x51, 0x08 },
-	{ 0x52, 0x09 },
-	{ 0x53, 0x0a },
-	{ 0x54, 0x11 },
-	{ 0x55, 0xec },
-	{ 0x56, 0xed },
-	{ 0x57, 0x11 },
-	{ 0x58, 0xef },
-	{ 0x59, 0xf0 },
-	{ 0xb1, 0x01 },
-	{ 0xb4, 0x15 },
-	{ 0xb5, 0x16 },
-	{ 0xb6, 0x09 },
-	{ 0xb7, 0x0f },
-	{ 0xb8, 0x0d },
-	{ 0xb9, 0x0b },
-	{ 0xba, 0x00 },
-	{ 0xc7, 0x02 },
-	{ 0xca, 0x17 },
-	{ 0xcb, 0x18 },
-	{ 0xcc, 0x0a },
-	{ 0xcd, 0x10 },
-	{ 0xce, 0x0e },
-	{ 0xcf, 0x0c },
-	{ 0xd0, 0x00 },
-	{ 0x81, 0x00 },
-	{ 0x84, 0x15 },
-	{ 0x85, 0x16 },
-	{ 0x86, 0x10 },
-	{ 0x87, 0x0a },
-	{ 0x88, 0x0c },
-	{ 0x89, 0x0e },
-	{ 0x8a, 0x02 },
-	{ 0x97, 0x00 },
-	{ 0x9a, 0x17 },
-	{ 0x9b, 0x18 },
-	{ 0x9c, 0x0f },
-	{ 0x9d, 0x09 },
-	{ 0x9e, 0x0b },
-	{ 0x9f, 0x0d },
-	{ 0xa0, 0x01 },
-	{ 0xff, 0x30 },
-	{ 0xff, 0x52 },
-	{ 0xff, 0x02 },
+	// EXTC Command set enable, select page 2
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Set gray scale voltage to adjust gamma
+	{ 0xb0, 0x0b }, // PGAMVR0
+	{ 0xb1, 0x16 }, // PGAMVR1
+	{ 0xb2, 0x17 }, // PGAMVR2
+	{ 0xb3, 0x2c }, // PGAMVR3
+	{ 0xb4, 0x32 }, // PGAMVR4
+	{ 0xb5, 0x3b }, // PGAMVR5
+	{ 0xb6, 0x29 }, // PGAMPR0
+	{ 0xb7, 0x40 }, // PGAMPR1
+	{ 0xb8, 0x0d }, // PGAMPK0
+	{ 0xb9, 0x05 }, // PGAMPK1
+	{ 0xba, 0x12 }, // PGAMPK2
+	{ 0xbb, 0x10 }, // PGAMPK3
+	{ 0xbc, 0x12 }, // PGAMPK4
+	{ 0xbd, 0x15 }, // PGAMPK5
+	{ 0xbe, 0x19 }, // PGAMPK6
+	{ 0xbf, 0x0e }, // PGAMPK7
+	{ 0xc0, 0x16 }, // PGAMPK8
+	{ 0xc1, 0x0a }, // PGAMPK9
+	// Set gray scale voltage to adjust gamma
+	{ 0xd0, 0x0c }, // NGAMVR0
+	{ 0xd1, 0x17 }, // NGAMVR0
+	{ 0xd2, 0x14 }, // NGAMVR1
+	{ 0xd3, 0x2e }, // NGAMVR2
+	{ 0xd4, 0x32 }, // NGAMVR3
+	{ 0xd5, 0x3c }, // NGAMVR4
+	{ 0xd6, 0x22 }, // NGAMPR0
+	{ 0xd7, 0x3d }, // NGAMPR1
+	{ 0xd8, 0x0d }, // NGAMPK0
+	{ 0xd9, 0x07 }, // NGAMPK1
+	{ 0xda, 0x13 }, // NGAMPK2
+	{ 0xdb, 0x13 }, // NGAMPK3
+	{ 0xdc, 0x11 }, // NGAMPK4
+	{ 0xdd, 0x15 }, // NGAMPK5
+	{ 0xde, 0x19 }, // NGAMPK6
+	{ 0xdf, 0x10 }, // NGAMPK7
+	{ 0xe0, 0x17 }, // NGAMPK8
+	{ 0xe1, 0x0a }, // NGAMPK9
+	// EXTC Command set enable, select page 3
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 },
+	// Set various timing settings
+	{ 0x00, 0x2a }, // GIP_VST_1
+	{ 0x01, 0x2a }, // GIP_VST_2
+	{ 0x02, 0x2a }, // GIP_VST_3
+	{ 0x03, 0x2a }, // GIP_VST_4
+	{ 0x04, 0x61 }, // GIP_VST_5
+	{ 0x05, 0x80 }, // GIP_VST_6
+	{ 0x06, 0xc7 }, // GIP_VST_7
+	{ 0x07, 0x01 }, // GIP_VST_8
+	{ 0x08, 0x03 }, // GIP_VST_9
+	{ 0x09, 0x04 }, // GIP_VST_10
+	{ 0x70, 0x22 }, // GIP_ECLK1
+	{ 0x71, 0x80 }, // GIP_ECLK2
+	{ 0x30, 0x2a }, // GIP_CLK_1
+	{ 0x31, 0x2a }, // GIP_CLK_2
+	{ 0x32, 0x2a }, // GIP_CLK_3
+	{ 0x33, 0x2a }, // GIP_CLK_4
+	{ 0x34, 0x61 }, // GIP_CLK_5
+	{ 0x35, 0xc5 }, // GIP_CLK_6
+	{ 0x36, 0x80 }, // GIP_CLK_7
+	{ 0x37, 0x23 }, // GIP_CLK_8
+	{ 0x40, 0x03 }, // GIP_CLKA_1
+	{ 0x41, 0x04 }, // GIP_CLKA_2
+	{ 0x42, 0x05 }, // GIP_CLKA_3
+	{ 0x43, 0x06 }, // GIP_CLKA_4
+	{ 0x44, 0x11 }, // GIP_CLKA_5
+	{ 0x45, 0xe8 }, // GIP_CLKA_6
+	{ 0x46, 0xe9 }, // GIP_CLKA_7
+	{ 0x47, 0x11 }, // GIP_CLKA_8
+	{ 0x48, 0xea }, // GIP_CLKA_9
+	{ 0x49, 0xeb }, // GIP_CLKA_10
+	{ 0x50, 0x07 }, // GIP_CLKB_1
+	{ 0x51, 0x08 }, // GIP_CLKB_2
+	{ 0x52, 0x09 }, // GIP_CLKB_3
+	{ 0x53, 0x0a }, // GIP_CLKB_4
+	{ 0x54, 0x11 }, // GIP_CLKB_5
+	{ 0x55, 0xec }, // GIP_CLKB_6
+	{ 0x56, 0xed }, // GIP_CLKB_7
+	{ 0x57, 0x11 }, // GIP_CLKB_8
+	{ 0x58, 0xef }, // GIP_CLKB_9
+	{ 0x59, 0xf0 }, // GIP_CLKB_10
+	// Map internal GOA signals to GOA output pad
+	{ 0xb1, 0x01 }, // PANELD2U2
+	{ 0xb4, 0x15 }, // PANELD2U5
+	{ 0xb5, 0x16 }, // PANELD2U6
+	{ 0xb6, 0x09 }, // PANELD2U7
+	{ 0xb7, 0x0f }, // PANELD2U8
+	{ 0xb8, 0x0d }, // PANELD2U9
+	{ 0xb9, 0x0b }, // PANELD2U10
+	{ 0xba, 0x00 }, // PANELD2U11
+	{ 0xc7, 0x02 }, // PANELD2U24
+	{ 0xca, 0x17 }, // PANELD2U27
+	{ 0xcb, 0x18 }, // PANELD2U28
+	{ 0xcc, 0x0a }, // PANELD2U29
+	{ 0xcd, 0x10 }, // PANELD2U30
+	{ 0xce, 0x0e }, // PANELD2U31
+	{ 0xcf, 0x0c }, // PANELD2U32
+	{ 0xd0, 0x00 }, // PANELD2U33
+	// Map internal GOA signals to GOA output pad
+	{ 0x81, 0x00 }, // PANELU2D2
+	{ 0x84, 0x15 }, // PANELU2D5
+	{ 0x85, 0x16 }, // PANELU2D6
+	{ 0x86, 0x10 }, // PANELU2D7
+	{ 0x87, 0x0a }, // PANELU2D8
+	{ 0x88, 0x0c }, // PANELU2D9
+	{ 0x89, 0x0e }, // PANELU2D10
+	{ 0x8a, 0x02 }, // PANELU2D11
+	{ 0x97, 0x00 }, // PANELU2D24
+	{ 0x9a, 0x17 }, // PANELU2D27
+	{ 0x9b, 0x18 }, // PANELU2D28
+	{ 0x9c, 0x0f }, // PANELU2D29
+	{ 0x9d, 0x09 }, // PANELU2D30
+	{ 0x9e, 0x0b }, // PANELU2D31
+	{ 0x9f, 0x0d }, // PANELU2D32
+	{ 0xa0, 0x01 }, // PANELU2D33
+	// EXTC Command set enable, select page 2
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Unknown registers
 	{ 0x01, 0x01 },
 	{ 0x02, 0xda },
 	{ 0x03, 0xba },
@@ -227,10 +230,10 @@ static const struct nv3052c_reg nv3052c_panel_regs[] = {
 	{ 0x0e, 0x48 },
 	{ 0x0f, 0x38 },
 	{ 0x10, 0x2b },
-	{ 0xff, 0x30 },
-	{ 0xff, 0x52 },
-	{ 0xff, 0x00 },
-	{ 0x36, 0x0a },
+	// EXTC Command set enable, select page 0
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 },
+	// Display Access Control
+	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
 };
 
 static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)

-- 
2.43.0

[PATCH RFC v5 2/7] drm/panel: nv3052c: Add SPI device IDs

[John Watts]

SPI drivers needs their own list of compatible device IDs in order
for automatic module loading to work. Add those for this driver.

Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 589431523ce7..90dea21f9856 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -465,6 +465,12 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
 };
 
+static const struct spi_device_id nv3052c_ids[] = {
+	{ "ltk035c5444t", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, nv3052c_ids);
+
 static const struct of_device_id nv3052c_of_match[] = {
 	{ .compatible = "leadtek,ltk035c5444t", .data = &ltk035c5444t_panel_info },
 	{ /* sentinel */ }
@@ -476,6 +482,7 @@ static struct spi_driver nv3052c_driver = {
 		.name = "nv3052c",
 		.of_match_table = nv3052c_of_match,
 	},
+	.id_table = nv3052c_ids,
 	.probe = nv3052c_probe,
 	.remove = nv3052c_remove,
 };

-- 
2.43.0

[PATCH RFC v5 3/7] drm/panel: nv3052c: Allow specifying registers per panel

[John Watts]

Panel initialization registers are per-display and not tied to the
controller itself. Different panels will specify their own registers.
Attach the sequences to the panel info struct so future panels
can specify their own sequences.

Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
---
 drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 90dea21f9856..b0114b5e8554 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -20,11 +20,18 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
 
+struct nv3052c_reg {
+	u8 cmd;
+	u8 val;
+};
+
 struct nv3052c_panel_info {
 	const struct drm_display_mode *display_modes;
 	unsigned int num_modes;
 	u16 width_mm, height_mm;
 	u32 bus_format, bus_flags;
+	const struct nv3052c_reg *panel_regs;
+	unsigned int panel_regs_len;
 };
 
 struct nv3052c {
@@ -36,12 +43,7 @@ struct nv3052c {
 	struct gpio_desc *reset_gpio;
 };
 
-struct nv3052c_reg {
-	u8 cmd;
-	u8 val;
-};
-
-static const struct nv3052c_reg nv3052c_panel_regs[] = {
+static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
 	// EXTC Command set enable, select page 1
 	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
 	// Mostly unknown registers
@@ -244,6 +246,8 @@ static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
 static int nv3052c_prepare(struct drm_panel *panel)
 {
 	struct nv3052c *priv = to_nv3052c(panel);
+	const struct nv3052c_reg *panel_regs = priv->panel_info->panel_regs;
+	unsigned int panel_regs_len = priv->panel_info->panel_regs_len;
 	struct mipi_dbi *dbi = &priv->dbi;
 	unsigned int i;
 	int err;
@@ -260,9 +264,9 @@ static int nv3052c_prepare(struct drm_panel *panel)
 	gpiod_set_value_cansleep(priv->reset_gpio, 0);
 	usleep_range(5000, 20000);
 
-	for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
-		err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
-				       nv3052c_panel_regs[i].val);
+	for (i = 0; i < panel_regs_len; i++) {
+		err = mipi_dbi_command(dbi, panel_regs[i].cmd,
+				       panel_regs[i].val);
 
 		if (err) {
 			dev_err(priv->dev, "Unable to set register: %d\n", err);
@@ -463,6 +467,8 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.height_mm = 64,
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.panel_regs = ltk035c5444t_panel_regs,
+	.panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
 };
 
 static const struct spi_device_id nv3052c_ids[] = {

-- 
2.43.0

[PATCH RFC v5 4/7] drm/panel: nv3052c: Add Fascontek FS035VG158 LCD display

[John Watts]

This display is extremely similar to the LTK035C5444T, but still has
some minor variations in panel initialization.

Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 223 ++++++++++++++++++++++++
 1 file changed, 223 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index b0114b5e8554..1aab0c9ae52f 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -238,6 +238,201 @@ static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
 	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
 };
 
+static const struct nv3052c_reg fs035vg158_panel_regs[] = {
+	// EXTC Command set enable, select page 1
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
+	// Mostly unknown registers
+	{ 0xe3, 0x00 },
+	{ 0x40, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x03 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x07 },
+	{ 0x0a, 0x01 },
+	{ 0x0b, 0x32 },
+	{ 0x0c, 0x32 },
+	{ 0x0d, 0x0b },
+	{ 0x0e, 0x00 },
+	{ 0x23, 0x20 }, // RGB interface control: DE MODE PCLK-N
+	{ 0x24, 0x0c },
+	{ 0x25, 0x06 },
+	{ 0x26, 0x14 },
+	{ 0x27, 0x14 },
+	{ 0x38, 0x9c }, //VCOM_ADJ1, different to ltk035c5444t
+	{ 0x39, 0xa7 }, //VCOM_ADJ2, different to ltk035c5444t
+	{ 0x3a, 0x50 }, //VCOM_ADJ3, different to ltk035c5444t
+	{ 0x28, 0x40 },
+	{ 0x29, 0x01 },
+	{ 0x2a, 0xdf },
+	{ 0x49, 0x3c },
+	{ 0x91, 0x57 }, //EXTPW_CTRL2, different to ltk035c5444t
+	{ 0x92, 0x57 }, //EXTPW_CTRL3, different to ltk035c5444t
+	{ 0xa0, 0x55 },
+	{ 0xa1, 0x50 },
+	{ 0xa4, 0x9c },
+	{ 0xa7, 0x02 },
+	{ 0xa8, 0x01 },
+	{ 0xa9, 0x01 },
+	{ 0xaa, 0xfc },
+	{ 0xab, 0x28 },
+	{ 0xac, 0x06 },
+	{ 0xad, 0x06 },
+	{ 0xae, 0x06 },
+	{ 0xaf, 0x03 },
+	{ 0xb0, 0x08 },
+	{ 0xb1, 0x26 },
+	{ 0xb2, 0x28 },
+	{ 0xb3, 0x28 },
+	{ 0xb4, 0x03 }, // Unknown, different to ltk035c5444
+	{ 0xb5, 0x08 },
+	{ 0xb6, 0x26 },
+	{ 0xb7, 0x08 },
+	{ 0xb8, 0x26 },
+	{ 0xf0, 0x00 },
+	{ 0xf6, 0xc0 },
+	// EXTC Command set enable, select page 0
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Set gray scale voltage to adjust gamma
+	{ 0xb0, 0x0b }, // PGAMVR0
+	{ 0xb1, 0x16 }, // PGAMVR1
+	{ 0xb2, 0x17 }, // PGAMVR2
+	{ 0xb3, 0x2c }, // PGAMVR3
+	{ 0xb4, 0x32 }, // PGAMVR4
+	{ 0xb5, 0x3b }, // PGAMVR5
+	{ 0xb6, 0x29 }, // PGAMPR0
+	{ 0xb7, 0x40 }, // PGAMPR1
+	{ 0xb8, 0x0d }, // PGAMPK0
+	{ 0xb9, 0x05 }, // PGAMPK1
+	{ 0xba, 0x12 }, // PGAMPK2
+	{ 0xbb, 0x10 }, // PGAMPK3
+	{ 0xbc, 0x12 }, // PGAMPK4
+	{ 0xbd, 0x15 }, // PGAMPK5
+	{ 0xbe, 0x19 }, // PGAMPK6
+	{ 0xbf, 0x0e }, // PGAMPK7
+	{ 0xc0, 0x16 }, // PGAMPK8
+	{ 0xc1, 0x0a }, // PGAMPK9
+	// Set gray scale voltage to adjust gamma
+	{ 0xd0, 0x0c }, // NGAMVR0
+	{ 0xd1, 0x17 }, // NGAMVR0
+	{ 0xd2, 0x14 }, // NGAMVR1
+	{ 0xd3, 0x2e }, // NGAMVR2
+	{ 0xd4, 0x32 }, // NGAMVR3
+	{ 0xd5, 0x3c }, // NGAMVR4
+	{ 0xd6, 0x22 }, // NGAMPR0
+	{ 0xd7, 0x3d }, // NGAMPR1
+	{ 0xd8, 0x0d }, // NGAMPK0
+	{ 0xd9, 0x07 }, // NGAMPK1
+	{ 0xda, 0x13 }, // NGAMPK2
+	{ 0xdb, 0x13 }, // NGAMPK3
+	{ 0xdc, 0x11 }, // NGAMPK4
+	{ 0xdd, 0x15 }, // NGAMPK5
+	{ 0xde, 0x19 }, // NGAMPK6
+	{ 0xdf, 0x10 }, // NGAMPK7
+	{ 0xe0, 0x17 }, // NGAMPK8
+	{ 0xe1, 0x0a }, // NGAMPK9
+	// EXTC Command set enable, select page 3
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 },
+	// Set various timing settings
+	{ 0x00, 0x2a }, // GIP_VST_1
+	{ 0x01, 0x2a }, // GIP_VST_2
+	{ 0x02, 0x2a }, // GIP_VST_3
+	{ 0x03, 0x2a }, // GIP_VST_4
+	{ 0x04, 0x61 }, // GIP_VST_5
+	{ 0x05, 0x80 }, // GIP_VST_6
+	{ 0x06, 0xc7 }, // GIP_VST_7
+	{ 0x07, 0x01 }, // GIP_VST_8
+	{ 0x08, 0x03 }, // GIP_VST_9
+	{ 0x09, 0x04 }, // GIP_VST_10
+	{ 0x70, 0x22 }, // GIP_ECLK1
+	{ 0x71, 0x80 }, // GIP_ECLK2
+	{ 0x30, 0x2a }, // GIP_CLK_1
+	{ 0x31, 0x2a }, // GIP_CLK_2
+	{ 0x32, 0x2a }, // GIP_CLK_3
+	{ 0x33, 0x2a }, // GIP_CLK_4
+	{ 0x34, 0x61 }, // GIP_CLK_5
+	{ 0x35, 0xc5 }, // GIP_CLK_6
+	{ 0x36, 0x80 }, // GIP_CLK_7
+	{ 0x37, 0x23 }, // GIP_CLK_8
+	{ 0x40, 0x03 }, // GIP_CLKA_1
+	{ 0x41, 0x04 }, // GIP_CLKA_2
+	{ 0x42, 0x05 }, // GIP_CLKA_3
+	{ 0x43, 0x06 }, // GIP_CLKA_4
+	{ 0x44, 0x11 }, // GIP_CLKA_5
+	{ 0x45, 0xe8 }, // GIP_CLKA_6
+	{ 0x46, 0xe9 }, // GIP_CLKA_7
+	{ 0x47, 0x11 }, // GIP_CLKA_8
+	{ 0x48, 0xea }, // GIP_CLKA_9
+	{ 0x49, 0xeb }, // GIP_CLKA_10
+	{ 0x50, 0x07 }, // GIP_CLKB_1
+	{ 0x51, 0x08 }, // GIP_CLKB_2
+	{ 0x52, 0x09 }, // GIP_CLKB_3
+	{ 0x53, 0x0a }, // GIP_CLKB_4
+	{ 0x54, 0x11 }, // GIP_CLKB_5
+	{ 0x55, 0xec }, // GIP_CLKB_6
+	{ 0x56, 0xed }, // GIP_CLKB_7
+	{ 0x57, 0x11 }, // GIP_CLKB_8
+	{ 0x58, 0xef }, // GIP_CLKB_9
+	{ 0x59, 0xf0 }, // GIP_CLKB_10
+	// Map internal GOA signals to GOA output pad
+	{ 0xb1, 0x01 }, // PANELD2U2
+	{ 0xb4, 0x15 }, // PANELD2U5
+	{ 0xb5, 0x16 }, // PANELD2U6
+	{ 0xb6, 0x09 }, // PANELD2U7
+	{ 0xb7, 0x0f }, // PANELD2U8
+	{ 0xb8, 0x0d }, // PANELD2U9
+	{ 0xb9, 0x0b }, // PANELD2U10
+	{ 0xba, 0x00 }, // PANELD2U11
+	{ 0xc7, 0x02 }, // PANELD2U24
+	{ 0xca, 0x17 }, // PANELD2U27
+	{ 0xcb, 0x18 }, // PANELD2U28
+	{ 0xcc, 0x0a }, // PANELD2U29
+	{ 0xcd, 0x10 }, // PANELD2U30
+	{ 0xce, 0x0e }, // PANELD2U31
+	{ 0xcf, 0x0c }, // PANELD2U32
+	{ 0xd0, 0x00 }, // PANELD2U33
+	// Map internal GOA signals to GOA output pad
+	{ 0x81, 0x00 }, // PANELU2D2
+	{ 0x84, 0x15 }, // PANELU2D5
+	{ 0x85, 0x16 }, // PANELU2D6
+	{ 0x86, 0x10 }, // PANELU2D7
+	{ 0x87, 0x0a }, // PANELU2D8
+	{ 0x88, 0x0c }, // PANELU2D9
+	{ 0x89, 0x0e }, // PANELU2D10
+	{ 0x8a, 0x02 }, // PANELU2D11
+	{ 0x97, 0x00 }, // PANELU2D24
+	{ 0x9a, 0x17 }, // PANELU2D27
+	{ 0x9b, 0x18 }, // PANELU2D28
+	{ 0x9c, 0x0f }, // PANELU2D29
+	{ 0x9d, 0x09 }, // PANELU2D30
+	{ 0x9e, 0x0b }, // PANELU2D31
+	{ 0x9f, 0x0d }, // PANELU2D32
+	{ 0xa0, 0x01 }, // PANELU2D33
+	// EXTC Command set enable, select page 2
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Unknown registers
+	{ 0x01, 0x01 },
+	{ 0x02, 0xda },
+	{ 0x03, 0xba },
+	{ 0x04, 0xa8 },
+	{ 0x05, 0x9a },
+	{ 0x06, 0x70 },
+	{ 0x07, 0xff },
+	{ 0x08, 0x91 },
+	{ 0x09, 0x90 },
+	{ 0x0a, 0xff },
+	{ 0x0b, 0x8f },
+	{ 0x0c, 0x60 },
+	{ 0x0d, 0x58 },
+	{ 0x0e, 0x48 },
+	{ 0x0f, 0x38 },
+	{ 0x10, 0x2b },
+	// EXTC Command set enable, select page 0
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 },
+	// Display Access Control
+	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
+};
+
 static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
 {
 	return container_of(panel, struct nv3052c, panel);
@@ -460,6 +655,21 @@ static const struct drm_display_mode ltk035c5444t_modes[] = {
 	},
 };
 
+static const struct drm_display_mode fs035vg158_modes[] = {
+	{ /* 60 Hz */
+		.clock = 21000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 34,
+		.hsync_end = 640 + 34 + 4,
+		.htotal = 640 + 34 + 4 + 20,
+		.vdisplay = 480,
+		.vsync_start = 480 + 12,
+		.vsync_end = 480 + 12 + 4,
+		.vtotal = 480 + 12 + 4 + 6,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+};
+
 static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.display_modes = ltk035c5444t_modes,
 	.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
@@ -471,14 +681,27 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
 };
 
+static const struct nv3052c_panel_info fs035vg158_panel_info = {
+	.display_modes = fs035vg158_modes,
+	.num_modes = ARRAY_SIZE(fs035vg158_modes),
+	.width_mm = 70,
+	.height_mm = 53,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.panel_regs = fs035vg158_panel_regs,
+	.panel_regs_len = ARRAY_SIZE(fs035vg158_panel_regs),
+};
+
 static const struct spi_device_id nv3052c_ids[] = {
 	{ "ltk035c5444t", },
+	{ "fs035vg158", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(spi, nv3052c_ids);
 
 static const struct of_device_id nv3052c_of_match[] = {
 	{ .compatible = "leadtek,ltk035c5444t", .data = &ltk035c5444t_panel_info },
+	{ .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, nv3052c_of_match);

-- 
2.43.0

[PATCH RFC v5 5/7] dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties

[John Watts]

Remove common properties listed in common yaml files.
Add required properties needed to describe the panel.

Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml   | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
index ebdca5f5a001..7a55961e1a3d 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -18,16 +18,12 @@ properties:
   compatible:
     const: leadtek,ltk035c5444t
 
-  backlight: true
-  port: true
-  power-supply: true
-  reg: true
-  reset-gpios: true
-
   spi-3wire: true
 
 required:
   - compatible
+  - reg
+  - port
   - power-supply
   - reset-gpios
 

-- 
2.43.0

[PATCH RFC v5 6/7] dt-bindings: vendor-prefixes: Add fascontek

[John Watts]

Fascontek manufactures LCD panels such as the FS035VG158.

Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6c3389eceede..8666f49574fb 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -474,6 +474,8 @@ patternProperties:
     description: Fairphone B.V.
   "^faraday,.*":
     description: Faraday Technology Corporation
+  "^fascontek,.*":
+    description: Fascontek
   "^fastrax,.*":
     description: Fastrax Oy
   "^fcs,.*":

-- 
2.43.0

[PATCH RFC v5 7/7] dt-bindings: display: panel: add Fascontek FS035VG158 panel

[John Watts]

This is a small 3.5" 640x480 IPS LCD panel.

Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../display/panel/fascontek,fs035vg158.yaml        | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml
new file mode 100644
index 000000000000..d13c4bd26de4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - John Watts <contact@jookia.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: fascontek,fs035vg158
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "fascontek,fs035vg158";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

-- 
2.43.0

Re: [PATCH RFC v5 0/7] Add FS035VG158 panel

[Neil Armstrong]

Hi,

On Sun, 10 Dec 2023 17:55:48 +1100, John Watts wrote:
> This RFC introduces support for the FS035VG158 LCD panel, cleaning up
> the nv3052c driver on the way and documentating existing panel code.
> 
> This revision is mostly a resend and ask for more feedback.
> I have tested that it works on next-20231208.
> 
> John.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[1/7] drm/panel: nv3052c: Document known register names
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=f48dee9ed7c992eaf6a3635db304a61ed82827b3
[2/7] drm/panel: nv3052c: Add SPI device IDs
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=095e3a99e793767ca6c0483d31fb5d4087966d51
[3/7] drm/panel: nv3052c: Allow specifying registers per panel
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=2e6b7be84d88c0af927967418a56e22d372ce98c
[4/7] drm/panel: nv3052c: Add Fascontek FS035VG158 LCD display
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=bf92f9163097dc717518d598116c1e385004b5ce
[5/7] dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=43cc1ce456b57ad48220393bbb7fac6e32369233
[6/7] dt-bindings: vendor-prefixes: Add fascontek
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8fcb387a210cfc30a3b61abae21d5c8c4a55e470
[7/7] dt-bindings: display: panel: add Fascontek FS035VG158 panel
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=267624378ed6bebd733b4917452d78780db032dc

-- 
Neil