[PATCH 1/8] remoteproc: k3-dsp: Use devm_rproc_alloc() helper

[PATCH 1/8] remoteproc: k3-dsp: Use devm_rproc_alloc() helper

[Andrew Davis]

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index ab882e3b7130b..93fbc89307d6a 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -690,8 +690,8 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to parse firmware-name property\n");
 
-	rproc = rproc_alloc(dev, dev_name(dev), &k3_dsp_rproc_ops, fw_name,
-			    sizeof(*kproc));
+	rproc = devm_rproc_alloc(dev, dev_name(dev), &k3_dsp_rproc_ops,
+				 fw_name, sizeof(*kproc));
 	if (!rproc)
 		return -ENOMEM;
 
@@ -707,12 +707,9 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	kproc->data = data;
 
 	kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci");
-	if (IS_ERR(kproc->ti_sci)) {
-		ret = dev_err_probe(dev, PTR_ERR(kproc->ti_sci),
-				    "failed to get ti-sci handle\n");
-		kproc->ti_sci = NULL;
-		goto free_rproc;
-	}
+	if (IS_ERR(kproc->ti_sci))
+		return dev_err_probe(dev, PTR_ERR(kproc->ti_sci),
+				     "failed to get ti-sci handle\n");
 
 	ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id);
 	if (ret) {
@@ -810,8 +807,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	ret1 = ti_sci_put_handle(kproc->ti_sci);
 	if (ret1)
 		dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret1));
-free_rproc:
-	rproc_free(rproc);
 	return ret;
 }
 
@@ -844,7 +839,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 		dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret));
 
 	k3_dsp_reserved_mem_exit(kproc);
-	rproc_free(kproc->rproc);
 }
 
 static const struct k3_dsp_mem_data c66_mems[] = {
-- 
2.39.2

[PATCH 2/8] remoteproc: k3-dsp: Add devm action to release reserved memory

[Andrew Davis]

Use a device lifecycle managed action to release reserved memory. This
helps prevent mistakes like releasing out of order in cleanup functions
and forgetting to release on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 93fbc89307d6a..0cb00146fe977 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -550,6 +550,13 @@ static int k3_dsp_rproc_of_get_memories(struct platform_device *pdev,
 	return 0;
 }
 
+static void k3_dsp_mem_release(void *data)
+{
+	struct device *dev = data;
+
+	of_reserved_mem_device_release(dev);
+}
+
 static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 {
 	struct device *dev = kproc->dev;
@@ -579,13 +586,14 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 			ERR_PTR(ret));
 		return ret;
 	}
+	ret = devm_add_action_or_reset(dev, k3_dsp_mem_release, dev);
+	if (ret)
+		return ret;
 
 	num_rmems--;
 	kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
-	if (!kproc->rmem) {
-		ret = -ENOMEM;
-		goto release_rmem;
-	}
+	if (!kproc->rmem)
+		return -ENOMEM;
 
 	/* use remaining reserved memory regions for static carveouts */
 	for (i = 0; i < num_rmems; i++) {
@@ -628,8 +636,6 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 	for (i--; i >= 0; i--)
 		iounmap(kproc->rmem[i].cpu_addr);
 	kfree(kproc->rmem);
-release_rmem:
-	of_reserved_mem_device_release(kproc->dev);
 	return ret;
 }
 
@@ -640,8 +646,6 @@ static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc)
 	for (i = 0; i < kproc->num_rmems; i++)
 		iounmap(kproc->rmem[i].cpu_addr);
 	kfree(kproc->rmem);
-
-	of_reserved_mem_device_release(kproc->dev);
 }
 
 static
-- 
2.39.2

[PATCH 3/8] remoteproc: k3-dsp: Use devm_kcalloc() helper

[Andrew Davis]

Use a device lifecycle managed action to free memory. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 0cb00146fe977..a13552c71f440 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -591,7 +591,7 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 		return ret;
 
 	num_rmems--;
-	kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
+	kproc->rmem = devm_kcalloc(dev, num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
 	if (!kproc->rmem)
 		return -ENOMEM;
 
@@ -635,7 +635,6 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 unmap_rmem:
 	for (i--; i >= 0; i--)
 		iounmap(kproc->rmem[i].cpu_addr);
-	kfree(kproc->rmem);
 	return ret;
 }
 
@@ -645,7 +644,6 @@ static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc)
 
 	for (i = 0; i < kproc->num_rmems; i++)
 		iounmap(kproc->rmem[i].cpu_addr);
-	kfree(kproc->rmem);
 }
 
 static
-- 
2.39.2

[PATCH 4/8] remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper

[Andrew Davis]

Use the device lifecycle managed TI-SCI get() function. This helps prevent
mistakes like not put()'ing in the wrong order in cleanup functions and
forgetting to put() on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 33 +++++++----------------
 1 file changed, 9 insertions(+), 24 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index a13552c71f440..0240340a83e90 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -682,7 +682,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	const char *fw_name;
 	bool p_state = false;
 	int ret = 0;
-	int ret1;
 
 	data = of_device_get_match_data(dev);
 	if (!data)
@@ -708,30 +707,24 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	kproc->dev = dev;
 	kproc->data = data;
 
-	kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci");
+	kproc->ti_sci = devm_ti_sci_get_by_phandle(dev, "ti,sci");
 	if (IS_ERR(kproc->ti_sci))
 		return dev_err_probe(dev, PTR_ERR(kproc->ti_sci),
 				     "failed to get ti-sci handle\n");
 
 	ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id);
-	if (ret) {
-		dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n");
-		goto put_sci;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n");
 
 	kproc->reset = devm_reset_control_get_exclusive(dev, NULL);
-	if (IS_ERR(kproc->reset)) {
-		ret = dev_err_probe(dev, PTR_ERR(kproc->reset),
-				    "failed to get reset\n");
-		goto put_sci;
-	}
+	if (IS_ERR(kproc->reset))
+		return dev_err_probe(dev, PTR_ERR(kproc->reset),
+				     "failed to get reset\n");
 
 	kproc->tsp = k3_dsp_rproc_of_get_tsp(dev, kproc->ti_sci);
-	if (IS_ERR(kproc->tsp)) {
-		ret = dev_err_probe(dev, PTR_ERR(kproc->tsp),
-				    "failed to construct ti-sci proc control\n");
-		goto put_sci;
-	}
+	if (IS_ERR(kproc->tsp))
+		return dev_err_probe(dev, PTR_ERR(kproc->tsp),
+				     "failed to construct ti-sci proc control\n");
 
 	ret = ti_sci_proc_request(kproc->tsp);
 	if (ret < 0) {
@@ -805,10 +798,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret1));
 free_tsp:
 	kfree(kproc->tsp);
-put_sci:
-	ret1 = ti_sci_put_handle(kproc->ti_sci);
-	if (ret1)
-		dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret1));
 	return ret;
 }
 
@@ -836,10 +825,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 
 	kfree(kproc->tsp);
 
-	ret = ti_sci_put_handle(kproc->ti_sci);
-	if (ret)
-		dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret));
-
 	k3_dsp_reserved_mem_exit(kproc);
 }
 
-- 
2.39.2

[PATCH 5/8] remoteproc: k3-dsp: Use devm_kzalloc() helper

[Andrew Davis]

Use device lifecycle managed devm_kzalloc() helper function. This helps
prevent mistakes like freeing out of order in cleanup functions and
forgetting to free on all error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 0240340a83e90..2aac25d013985 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -659,7 +659,7 @@ struct ti_sci_proc *k3_dsp_rproc_of_get_tsp(struct device *dev,
 	if (ret < 0)
 		return ERR_PTR(ret);
 
-	tsp = kzalloc(sizeof(*tsp), GFP_KERNEL);
+	tsp = devm_kzalloc(dev, sizeof(*tsp), GFP_KERNEL);
 	if (!tsp)
 		return ERR_PTR(-ENOMEM);
 
@@ -729,7 +729,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	ret = ti_sci_proc_request(kproc->tsp);
 	if (ret < 0) {
 		dev_err_probe(dev, ret, "ti_sci_proc_request failed\n");
-		goto free_tsp;
+		return ret;
 	}
 
 	ret = k3_dsp_rproc_of_get_memories(pdev, kproc);
@@ -796,8 +796,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	ret1 = ti_sci_proc_release(kproc->tsp);
 	if (ret1)
 		dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret1));
-free_tsp:
-	kfree(kproc->tsp);
 	return ret;
 }
 
@@ -823,8 +821,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 	if (ret)
 		dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret));
 
-	kfree(kproc->tsp);
-
 	k3_dsp_reserved_mem_exit(kproc);
 }
 
-- 
2.39.2

[PATCH 6/8] remoteproc: k3-dsp: Add devm action to release tsp

[Andrew Davis]

Use a device lifecycle managed action to release tps ti_sci_proc handle.
This helps prevent mistakes like releasing out of order in cleanup
functions and forgetting to release on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 26 +++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 2aac25d013985..800c8c6767086 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -646,6 +646,13 @@ static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc)
 		iounmap(kproc->rmem[i].cpu_addr);
 }
 
+static void k3_dsp_release_tsp(void *data)
+{
+	struct ti_sci_proc *tsp = data;
+
+	ti_sci_proc_release(tsp);
+}
+
 static
 struct ti_sci_proc *k3_dsp_rproc_of_get_tsp(struct device *dev,
 					    const struct ti_sci_handle *sci)
@@ -731,16 +738,17 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 		dev_err_probe(dev, ret, "ti_sci_proc_request failed\n");
 		return ret;
 	}
+	ret = devm_add_action_or_reset(dev, k3_dsp_release_tsp, kproc->tsp);
+	if (ret)
+		return ret;
 
 	ret = k3_dsp_rproc_of_get_memories(pdev, kproc);
 	if (ret)
-		goto release_tsp;
+		return ret;
 
 	ret = k3_dsp_reserved_mem_init(kproc);
-	if (ret) {
-		dev_err_probe(dev, ret, "reserved memory init failed\n");
-		goto release_tsp;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "reserved memory init failed\n");
 
 	ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id,
 					       NULL, &p_state);
@@ -792,10 +800,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 
 release_mem:
 	k3_dsp_reserved_mem_exit(kproc);
-release_tsp:
-	ret1 = ti_sci_proc_release(kproc->tsp);
-	if (ret1)
-		dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret1));
 	return ret;
 }
 
@@ -817,10 +821,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 
 	rproc_del(kproc->rproc);
 
-	ret = ti_sci_proc_release(kproc->tsp);
-	if (ret)
-		dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret));
-
 	k3_dsp_reserved_mem_exit(kproc);
 }
 
-- 
2.39.2

[PATCH 7/8] remoteproc: k3-dsp: Use devm_ioremap_wc() helper

[Andrew Davis]

Use a device lifecycle managed ioremap helper function. This helps prevent
mistakes like unmapping out of order in cleanup functions and forgetting
to unmap on all error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 48 +++++------------------
 1 file changed, 10 insertions(+), 38 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 800c8c6767086..f799f74734b4a 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -598,16 +598,13 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 	/* use remaining reserved memory regions for static carveouts */
 	for (i = 0; i < num_rmems; i++) {
 		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
-		if (!rmem_np) {
-			ret = -EINVAL;
-			goto unmap_rmem;
-		}
+		if (!rmem_np)
+			return -EINVAL;
 
 		rmem = of_reserved_mem_lookup(rmem_np);
 		if (!rmem) {
 			of_node_put(rmem_np);
-			ret = -EINVAL;
-			goto unmap_rmem;
+			return -EINVAL;
 		}
 		of_node_put(rmem_np);
 
@@ -615,12 +612,11 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 		/* 64-bit address regions currently not supported */
 		kproc->rmem[i].dev_addr = (u32)rmem->base;
 		kproc->rmem[i].size = rmem->size;
-		kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size);
+		kproc->rmem[i].cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
 		if (!kproc->rmem[i].cpu_addr) {
 			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
 				i + 1, &rmem->base, &rmem->size);
-			ret = -ENOMEM;
-			goto unmap_rmem;
+			return -ENOMEM;
 		}
 
 		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
@@ -631,19 +627,6 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
 	kproc->num_rmems = num_rmems;
 
 	return 0;
-
-unmap_rmem:
-	for (i--; i >= 0; i--)
-		iounmap(kproc->rmem[i].cpu_addr);
-	return ret;
-}
-
-static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc)
-{
-	int i;
-
-	for (i = 0; i < kproc->num_rmems; i++)
-		iounmap(kproc->rmem[i].cpu_addr);
 }
 
 static void k3_dsp_release_tsp(void *data)
@@ -752,10 +735,8 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 
 	ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id,
 					       NULL, &p_state);
-	if (ret) {
-		dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n");
-		goto release_mem;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n");
 
 	/* configure J721E devices for either remoteproc or IPC-only mode */
 	if (p_state) {
@@ -779,8 +760,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 		if (data->uses_lreset) {
 			ret = reset_control_status(kproc->reset);
 			if (ret < 0) {
-				dev_err_probe(dev, ret, "failed to get reset status\n");
-				goto release_mem;
+				return dev_err_probe(dev, ret, "failed to get reset status\n");
 			} else if (ret == 0) {
 				dev_warn(dev, "local reset is deasserted for device\n");
 				k3_dsp_rproc_reset(kproc);
@@ -789,18 +769,12 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	}
 
 	ret = rproc_add(rproc);
-	if (ret) {
-		dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n");
-		goto release_mem;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n");
 
 	platform_set_drvdata(pdev, kproc);
 
 	return 0;
-
-release_mem:
-	k3_dsp_reserved_mem_exit(kproc);
-	return ret;
 }
 
 static void k3_dsp_rproc_remove(struct platform_device *pdev)
@@ -820,8 +794,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 	}
 
 	rproc_del(kproc->rproc);
-
-	k3_dsp_reserved_mem_exit(kproc);
 }
 
 static const struct k3_dsp_mem_data c66_mems[] = {
-- 
2.39.2

[PATCH 8/8] remoteproc: k3-dsp: Use devm_rproc_add() helper

[Andrew Davis]

Use device lifecycle managed devm_rproc_add() helper function. This helps
prevent mistakes like deleting out of order in cleanup functions and
forgetting to delete on all error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index f799f74734b4a..3555b535b1683 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -768,7 +768,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = rproc_add(rproc);
+	ret = devm_rproc_add(dev, rproc);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n");
 
@@ -786,14 +786,9 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 
 	if (rproc->state == RPROC_ATTACHED) {
 		ret = rproc_detach(rproc);
-		if (ret) {
-			/* Note this error path leaks resources */
+		if (ret)
 			dev_err(dev, "failed to detach proc (%pe)\n", ERR_PTR(ret));
-			return;
-		}
 	}
-
-	rproc_del(kproc->rproc);
 }
 
 static const struct k3_dsp_mem_data c66_mems[] = {
-- 
2.39.2

Re: [PATCH 4/8] remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper

[Mathieu Poirier]

Hi Andrew,

On Tue, Jan 23, 2024 at 12:49:09PM -0600, Andrew Davis wrote:
> Use the device lifecycle managed TI-SCI get() function. This helps prevent
> mistakes like not put()'ing in the wrong order in cleanup functions and
> forgetting to put() on error paths.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
>  drivers/remoteproc/ti_k3_dsp_remoteproc.c | 33 +++++++----------------
>  1 file changed, 9 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> index a13552c71f440..0240340a83e90 100644
> --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> @@ -682,7 +682,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  	const char *fw_name;
>  	bool p_state = false;
>  	int ret = 0;
> -	int ret1;
> 

This patch is giving me a compilation error because @ret1 is still used in
"release_tsp:".  The 3rd hunk in the next patch is showing the problem.  The
goto statement is removed in the 6th patch.

I have applied the first 3 patches of this set so no need to resend them with
the next revision.  And please add a cover letter next time.

Thanks,
Mathieu

>  	data = of_device_get_match_data(dev);
>  	if (!data)
> @@ -708,30 +707,24 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  	kproc->dev = dev;
>  	kproc->data = data;
>  
> -	kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci");
> +	kproc->ti_sci = devm_ti_sci_get_by_phandle(dev, "ti,sci");
>  	if (IS_ERR(kproc->ti_sci))
>  		return dev_err_probe(dev, PTR_ERR(kproc->ti_sci),
>  				     "failed to get ti-sci handle\n");
>  
>  	ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id);
> -	if (ret) {
> -		dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n");
> -		goto put_sci;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n");
>  
>  	kproc->reset = devm_reset_control_get_exclusive(dev, NULL);
> -	if (IS_ERR(kproc->reset)) {
> -		ret = dev_err_probe(dev, PTR_ERR(kproc->reset),
> -				    "failed to get reset\n");
> -		goto put_sci;
> -	}
> +	if (IS_ERR(kproc->reset))
> +		return dev_err_probe(dev, PTR_ERR(kproc->reset),
> +				     "failed to get reset\n");
>  
>  	kproc->tsp = k3_dsp_rproc_of_get_tsp(dev, kproc->ti_sci);
> -	if (IS_ERR(kproc->tsp)) {
> -		ret = dev_err_probe(dev, PTR_ERR(kproc->tsp),
> -				    "failed to construct ti-sci proc control\n");
> -		goto put_sci;
> -	}
> +	if (IS_ERR(kproc->tsp))
> +		return dev_err_probe(dev, PTR_ERR(kproc->tsp),
> +				     "failed to construct ti-sci proc control\n");
>  
>  	ret = ti_sci_proc_request(kproc->tsp);
>  	if (ret < 0) {
> @@ -805,10 +798,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  		dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret1));
>  free_tsp:
>  	kfree(kproc->tsp);
> -put_sci:
> -	ret1 = ti_sci_put_handle(kproc->ti_sci);
> -	if (ret1)
> -		dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret1));
>  	return ret;
>  }
>  
> @@ -836,10 +825,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
>  
>  	kfree(kproc->tsp);
>  
> -	ret = ti_sci_put_handle(kproc->ti_sci);
> -	if (ret)
> -		dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret));
> -
>  	k3_dsp_reserved_mem_exit(kproc);
>  }
>  
> -- 
> 2.39.2
>