[PATCH 08/14] arm64: dts: qcom: sc7280: Drop PCIE_AUX_CLK from pcie_phy node

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is
only required by the PCIe controller. Hence drop it from pcie_phy node.

This also warrants a new compatible as the clocks differ between SC7280 and
SM8250.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 83b5b76ba179..00fa14777417 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2238,15 +2238,13 @@ pcie1: pcie@1c08000 {
 		};
 
 		pcie1_phy: phy@1c0e000 {
-			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+			compatible = "qcom,sc7280-qmp-pcie-phy";
 			reg = <0 0x01c0e000 0 0x1000>;
-			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
-				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			clocks = <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_CLKREF_EN>,
 				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
+			clock-names = "cfg_ahb",
 				      "ref",
 				      "refgen",
 				      "pipe";

-- 
2.25.1