linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yang Weijiang <weijiang.yang@intel.com>
To: seanjc@google.com, pbonzini@redhat.com, dave.hansen@intel.com,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	x86@kernel.org, yuan.yao@linux.intel.com
Cc: peterz@infradead.org, chao.gao@intel.com,
	rick.p.edgecombe@intel.com, mlevitsk@redhat.com,
	john.allen@amd.com, weijiang.yang@intel.com
Subject: [PATCH v9 02/27] x86/fpu/xstate: Refine CET user xstate bit enabling
Date: Tue, 23 Jan 2024 18:41:35 -0800	[thread overview]
Message-ID: <20240124024200.102792-3-weijiang.yang@intel.com> (raw)
In-Reply-To: <20240124024200.102792-1-weijiang.yang@intel.com>

Remove XFEATURE_CET_USER entry from dependency array as the entry doesn't
reflect true dependency between CET features and the user xstate bit.
Enable the bit in fpu_kernel_cfg.max_features when either SHSTK or IBT is
available.

Both user mode shadow stack and indirect branch tracking features depend
on XFEATURE_CET_USER bit in XSS to automatically save/restore user mode
xstate registers, i.e., IA32_U_CET and IA32_PL3_SSP whenever necessary.

Note, the issue, i.e., CPUID only enumerates IBT but no SHSTK is resulted
from CET KVM series which synthesizes guest CPUIDs based on userspace
settings,in real world the case is rare. In other words, the existing
dependency check is correct when only user mode SHSTK is available.

Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
 arch/x86/kernel/fpu/xstate.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 07911532b108..f6b98693da59 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -73,7 +73,6 @@ static unsigned short xsave_cpuid_features[] __initdata = {
 	[XFEATURE_PT_UNIMPLEMENTED_SO_FAR]	= X86_FEATURE_INTEL_PT,
 	[XFEATURE_PKRU]				= X86_FEATURE_OSPKE,
 	[XFEATURE_PASID]			= X86_FEATURE_ENQCMD,
-	[XFEATURE_CET_USER]			= X86_FEATURE_SHSTK,
 	[XFEATURE_XTILE_CFG]			= X86_FEATURE_AMX_TILE,
 	[XFEATURE_XTILE_DATA]			= X86_FEATURE_AMX_TILE,
 };
@@ -798,6 +797,14 @@ void __init fpu__init_system_xstate(unsigned int legacy_size)
 			fpu_kernel_cfg.max_features &= ~BIT_ULL(i);
 	}
 
+	/*
+	 * CET user mode xstate bit has been cleared by above sanity check.
+	 * Now pick it up if either SHSTK or IBT is available. Either feature
+	 * depends on the xstate bit to save/restore user mode states.
+	 */
+	if (boot_cpu_has(X86_FEATURE_SHSTK) || boot_cpu_has(X86_FEATURE_IBT))
+		fpu_kernel_cfg.max_features |= BIT_ULL(XFEATURE_CET_USER);
+
 	if (!cpu_feature_enabled(X86_FEATURE_XFD))
 		fpu_kernel_cfg.max_features &= ~XFEATURE_MASK_USER_DYNAMIC;
 
-- 
2.39.3


  parent reply	other threads:[~2024-01-24  2:42 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-24  2:41 [PATCH v9 00/27] Enable CET Virtualization Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 01/27] x86/fpu/xstate: Always preserve non-user xfeatures/flags in __state_perm Yang Weijiang
2024-01-30  1:29   ` Edgecombe, Rick P
2024-01-24  2:41 ` Yang Weijiang [this message]
2024-01-24  2:41 ` [PATCH v9 03/27] x86/fpu/xstate: Add CET supervisor mode state support Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 04/27] x86/fpu/xstate: Introduce XFEATURE_MASK_KERNEL_DYNAMIC xfeature set Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 05/27] x86/fpu/xstate: Introduce fpu_guest_cfg for guest FPU configuration Yang Weijiang
2024-01-30  1:29   ` Edgecombe, Rick P
2024-01-30 15:00     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 06/27] x86/fpu/xstate: Create guest fpstate with guest specific config Yang Weijiang
2024-01-30  1:38   ` Edgecombe, Rick P
2024-01-30 14:54     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 07/27] x86/fpu/xstate: Warn if kernel dynamic xfeatures detected in normal fpstate Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 08/27] KVM: x86: Rework cpuid_get_supported_xcr0() to operate on vCPU data Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 09/27] KVM: x86: Rename kvm_{g,s}et_msr() to menifest emulation operations Yang Weijiang
2024-01-25  3:43   ` Chao Gao
2024-01-24  2:41 ` [PATCH v9 10/27] KVM: x86: Refine xsave-managed guest register/MSR reset handling Yang Weijiang
2024-01-25 10:17   ` Chao Gao
2024-01-26  9:13     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 11/27] KVM: x86: Add kvm_msr_{read,write}() helpers Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 12/27] KVM: x86: Report XSS as to-be-saved if there are supported features Yang Weijiang
2024-01-25 10:37   ` Chao Gao
2024-01-24  2:41 ` [PATCH v9 13/27] KVM: x86: Refresh CPUID on write to guest MSR_IA32_XSS Yang Weijiang
2024-01-25 10:57   ` Chao Gao
2024-01-26  9:30     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 14/27] KVM: x86: Initialize kvm_caps.supported_xss Yang Weijiang
2024-01-26  1:35   ` Chao Gao
2024-01-24  2:41 ` [PATCH v9 15/27] KVM: x86: Load guest FPU state when access XSAVE-managed MSRs Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 16/27] KVM: x86: Add fault checks for guest CR4.CET setting Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 17/27] KVM: x86: Report KVM supported CET MSRs as to-be-saved Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 18/27] KVM: VMX: Introduce CET VMCS fields and control bits Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 19/27] KVM: x86: Use KVM-governed feature framework to track "SHSTK/IBT enabled" Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 20/27] KVM: VMX: Emulate read and write to CET MSRs Yang Weijiang
2024-01-24  2:41 ` [PATCH v9 21/27] KVM: x86: Save and reload SSP to/from SMRAM Yang Weijiang
2024-01-26  3:17   ` Chao Gao
2024-01-26  6:51     ` Chao Gao
2024-01-24  2:41 ` [PATCH v9 22/27] KVM: VMX: Set up interception for CET MSRs Yang Weijiang
2024-01-26  3:54   ` Chao Gao
2024-01-26  9:36     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 23/27] KVM: VMX: Set host constant supervisor states to VMCS fields Yang Weijiang
2024-01-26  6:31   ` Chao Gao
2024-01-26  9:37     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 24/27] KVM: x86: Enable CET virtualization for VMX and advertise to userspace Yang Weijiang
2024-01-26  7:50   ` Chao Gao
2024-01-26 12:54     ` Yang, Weijiang
2024-01-24  2:41 ` [PATCH v9 25/27] KVM: nVMX: Introduce new VMX_BASIC bit for event error_code delivery to L1 Yang Weijiang
2024-01-26  7:54   ` Chao Gao
2024-01-24  2:41 ` [PATCH v9 26/27] KVM: nVMX: Enable CET support for nested guest Yang Weijiang
2024-01-29  7:04   ` Chao Gao
2024-01-30  7:38     ` Yang, Weijiang
2024-01-24  2:42 ` [PATCH v9 27/27] KVM: x86: Stop emulating for CET protected branch instructions Yang Weijiang
2024-01-26  8:53   ` Chao Gao
2024-01-26 12:56     ` Yang, Weijiang
2024-01-30  1:40 ` [PATCH v9 00/27] Enable CET Virtualization Edgecombe, Rick P
2024-01-30 15:05   ` Yang, Weijiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240124024200.102792-3-weijiang.yang@intel.com \
    --to=weijiang.yang@intel.com \
    --cc=chao.gao@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=john.allen@amd.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rick.p.edgecombe@intel.com \
    --cc=seanjc@google.com \
    --cc=x86@kernel.org \
    --cc=yuan.yao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).