[PATCH 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend

[Aren Moynihan <aren@peacevolution.org>]

If none of the managed leds enable LED_CORE_SUSPENDRESUME, then we
shouldn't need to set it here. This makes it possible to use multicolor
groups with gpio leds that enable retain-state-suspended in the device
tree.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
---

 drivers/leds/rgb/leds-group-multicolor.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/rgb/leds-group-multicolor.c b/drivers/leds/rgb/leds-group-multicolor.c
index 39f58be32af5..194c6a33640b 100644
--- a/drivers/leds/rgb/leds-group-multicolor.c
+++ b/drivers/leds/rgb/leds-group-multicolor.c
@@ -69,7 +69,7 @@ static int leds_gmc_probe(struct platform_device *pdev)
 	struct mc_subled *subled;
 	struct leds_multicolor *priv;
 	unsigned int max_brightness = 0;
-	int i, ret, count = 0;
+	int i, ret, count, common_flags = 0;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -91,6 +91,7 @@ static int leds_gmc_probe(struct platform_device *pdev)
 		if (!priv->monochromatics)
 			return -ENOMEM;
 
+		common_flags |= led_cdev->flags;
 		priv->monochromatics[count] = led_cdev;
 
 		max_brightness = max(max_brightness, led_cdev->max_brightness);
@@ -114,12 +115,15 @@ static int leds_gmc_probe(struct platform_device *pdev)
 
 	/* Initialise the multicolor's LED class device */
 	cdev = &priv->mc_cdev.led_cdev;
-	cdev->flags = LED_CORE_SUSPENDRESUME;
 	cdev->brightness_set_blocking = leds_gmc_set;
 	cdev->max_brightness = max_brightness;
 	cdev->color = LED_COLOR_ID_MULTI;
 	priv->mc_cdev.num_colors = count;
 
+	/* we only need suspend/resume if a sub-led requests it */
+	if (common_flags & LED_CORE_SUSPENDRESUME)
+		cdev->flags = LED_CORE_SUSPENDRESUME;
+
 	init_data.fwnode = dev_fwnode(dev);
 	ret = devm_led_classdev_multicolor_register_ext(dev, &priv->mc_cdev, &init_data);
 	if (ret)
-- 
2.43.0