* [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
@ 2024-01-31 2:27 Christian Marangi
2024-02-01 19:27 ` Konrad Dybcio
2024-02-07 4:46 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Christian Marangi @ 2024-01-31 2:27 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel
Cc: Christian Marangi
Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
of using the default value of 390KHz from MDIO default divider.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e566..08ddfeece043 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -264,6 +264,8 @@ mdio: mdio@90000 {
clocks = <&gcc GCC_MDIO_AHB_CLK>;
clock-names = "gcc_mdio_ahb_clk";
+ clock-frequency = <6250000>;
+
status = "disabled";
};
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
2024-01-31 2:27 [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node Christian Marangi
@ 2024-02-01 19:27 ` Konrad Dybcio
2024-02-07 4:46 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2024-02-01 19:27 UTC (permalink / raw)
To: Christian Marangi, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel
On 31.01.2024 03:27, Christian Marangi wrote:
> Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
> of using the default value of 390KHz from MDIO default divider.
>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
2024-01-31 2:27 [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node Christian Marangi
2024-02-01 19:27 ` Konrad Dybcio
@ 2024-02-07 4:46 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2024-02-07 4:46 UTC (permalink / raw)
To: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Christian Marangi
On Wed, 31 Jan 2024 03:27:29 +0100, Christian Marangi wrote:
> Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
> of using the default value of 390KHz from MDIO default divider.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
commit: cb77d0ad460e2c97a00c02ed78afdf45476e5e5f
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-02-07 4:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-01-31 2:27 [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node Christian Marangi
2024-02-01 19:27 ` Konrad Dybcio
2024-02-07 4:46 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).