* [PATCH v2] gpu: host1x: Ignore clients initialization failure
@ 2018-08-09 23:12 Dmitry Osipenko
2018-08-13 17:48 ` Dmitry Osipenko
0 siblings, 1 reply; 3+ messages in thread
From: Dmitry Osipenko @ 2018-08-09 23:12 UTC (permalink / raw)
To: Thierry Reding, Mikko Perttunen; +Cc: linux-tegra, dri-devel, linux-kernel
From time to time new bugs are popping up, causing some host1x client to
fail its initialization. Currently a single clients initialization failure
causes whole host1x device registration to fail, as a result a single DRM
sub-device initialization failure makes whole DRM initialization to fail.
Let's ignore clients initialization failure, as a result display panel
lights up even if some DRM clients (say GR2D or VIC) fail to initialize.
Actually VIC fails if initramfs misses the firmware file, so with this
change a serial console isn't needed anymore to figure out why display
isn't working.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
Changelog:
v2: Added WARN_ON() that should get more attention than just a error message.
Made clients_lock to lock around the lists modification, that is in line
with the rest of the code.
drivers/gpu/host1x/bus.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
index 815bdb42e3f0..07bb6b6c1260 100644
--- a/drivers/gpu/host1x/bus.c
+++ b/drivers/gpu/host1x/bus.c
@@ -199,19 +199,23 @@ static void host1x_subdev_unregister(struct host1x_device *device,
*/
int host1x_device_init(struct host1x_device *device)
{
- struct host1x_client *client;
+ struct host1x_client *client, *cl;
int err;
mutex_lock(&device->clients_lock);
- list_for_each_entry(client, &device->clients, list) {
+ list_for_each_entry_safe(client, cl, &device->clients, list) {
if (client->ops && client->ops->init) {
err = client->ops->init(client);
- if (err < 0) {
+ if (WARN_ON(err < 0)) {
dev_err(&device->dev,
"failed to initialize %s: %d\n",
dev_name(client->dev), err);
- goto teardown;
+
+ /* add the client to the list of idle clients */
+ mutex_lock(&clients_lock);
+ list_add_tail(&client->list, &clients);
+ mutex_unlock(&clients_lock);
}
}
}
@@ -219,14 +223,6 @@ int host1x_device_init(struct host1x_device *device)
mutex_unlock(&device->clients_lock);
return 0;
-
-teardown:
- list_for_each_entry_continue_reverse(client, &device->clients, list)
- if (client->ops->exit)
- client->ops->exit(client);
-
- mutex_unlock(&device->clients_lock);
- return err;
}
EXPORT_SYMBOL(host1x_device_init);
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] gpu: host1x: Ignore clients initialization failure
2018-08-09 23:12 [PATCH v2] gpu: host1x: Ignore clients initialization failure Dmitry Osipenko
@ 2018-08-13 17:48 ` Dmitry Osipenko
2018-08-16 17:20 ` Dmitry Osipenko
0 siblings, 1 reply; 3+ messages in thread
From: Dmitry Osipenko @ 2018-08-13 17:48 UTC (permalink / raw)
To: Thierry Reding; +Cc: Mikko Perttunen, linux-tegra, dri-devel, linux-kernel
On Friday, 10 August 2018 02:12:11 MSK Dmitry Osipenko wrote:
> From time to time new bugs are popping up, causing some host1x client to
> fail its initialization. Currently a single clients initialization failure
> causes whole host1x device registration to fail, as a result a single DRM
> sub-device initialization failure makes whole DRM initialization to fail.
> Let's ignore clients initialization failure, as a result display panel
> lights up even if some DRM clients (say GR2D or VIC) fail to initialize.
> Actually VIC fails if initramfs misses the firmware file, so with this
> change a serial console isn't needed anymore to figure out why display
> isn't working.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>
> Changelog:
>
> v2: Added WARN_ON() that should get more attention than just a error
> message. Made clients_lock to lock around the lists modification, that is
> in line with the rest of the code.
>
> drivers/gpu/host1x/bus.c | 20 ++++++++------------
> 1 file changed, 8 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
> index 815bdb42e3f0..07bb6b6c1260 100644
> --- a/drivers/gpu/host1x/bus.c
> +++ b/drivers/gpu/host1x/bus.c
> @@ -199,19 +199,23 @@ static void host1x_subdev_unregister(struct
> host1x_device *device, */
> int host1x_device_init(struct host1x_device *device)
> {
> - struct host1x_client *client;
> + struct host1x_client *client, *cl;
> int err;
>
> mutex_lock(&device->clients_lock);
>
> - list_for_each_entry(client, &device->clients, list) {
> + list_for_each_entry_safe(client, cl, &device->clients, list) {
> if (client->ops && client->ops->init) {
> err = client->ops->init(client);
> - if (err < 0) {
> + if (WARN_ON(err < 0)) {
> dev_err(&device->dev,
> "failed to initialize %s: %d\n",
> dev_name(client->dev), err);
> - goto teardown;
> +
> + /* add the client to the list of idle clients */
> + mutex_lock(&clients_lock);
> + list_add_tail(&client->list, &clients);
This shall be list_move_tail(), v3 is coming.
> + mutex_unlock(&clients_lock);
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] gpu: host1x: Ignore clients initialization failure
2018-08-13 17:48 ` Dmitry Osipenko
@ 2018-08-16 17:20 ` Dmitry Osipenko
0 siblings, 0 replies; 3+ messages in thread
From: Dmitry Osipenko @ 2018-08-16 17:20 UTC (permalink / raw)
To: Thierry Reding; +Cc: Mikko Perttunen, linux-tegra, dri-devel, linux-kernel
On Monday, 13 August 2018 20:48:25 MSK Dmitry Osipenko wrote:
> On Friday, 10 August 2018 02:12:11 MSK Dmitry Osipenko wrote:
> > From time to time new bugs are popping up, causing some host1x client to
> > fail its initialization. Currently a single clients initialization failure
> > causes whole host1x device registration to fail, as a result a single DRM
> > sub-device initialization failure makes whole DRM initialization to fail.
> > Let's ignore clients initialization failure, as a result display panel
> > lights up even if some DRM clients (say GR2D or VIC) fail to initialize.
> > Actually VIC fails if initramfs misses the firmware file, so with this
> > change a serial console isn't needed anymore to figure out why display
> > isn't working.
> >
> > Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> > ---
> >
> > Changelog:
> >
> > v2: Added WARN_ON() that should get more attention than just a error
> > message. Made clients_lock to lock around the lists modification, that is
> > in line with the rest of the code.
> >
> > drivers/gpu/host1x/bus.c | 20 ++++++++------------
> > 1 file changed, 8 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
> > index 815bdb42e3f0..07bb6b6c1260 100644
> > --- a/drivers/gpu/host1x/bus.c
> > +++ b/drivers/gpu/host1x/bus.c
> > @@ -199,19 +199,23 @@ static void host1x_subdev_unregister(struct
> > host1x_device *device, */
> >
> > int host1x_device_init(struct host1x_device *device)
> > {
> >
> > - struct host1x_client *client;
> > + struct host1x_client *client, *cl;
> >
> > int err;
> >
> > mutex_lock(&device->clients_lock);
> >
> > - list_for_each_entry(client, &device->clients, list) {
> > + list_for_each_entry_safe(client, cl, &device->clients, list) {
> >
> > if (client->ops && client->ops->init) {
> >
> > err = client->ops->init(client);
> >
> > - if (err < 0) {
> > + if (WARN_ON(err < 0)) {
> >
> > dev_err(&device->dev,
> >
> > "failed to initialize %s: %d\n",
> > dev_name(client->dev), err);
> >
> > - goto teardown;
> > +
> > + /* add the client to the list of idle clients */
> > + mutex_lock(&clients_lock);
> > + list_add_tail(&client->list, &clients);
>
> This shall be list_move_tail(), v3 is coming.
>
> > + mutex_unlock(&clients_lock);
I just realized that DRM won't load if any of host1x drivers fail to probe. I
think the behaviour should be consistent in a case of driver-probe and client-
init failures. It looks like changing drivers probe error handling will be a
much bigger change, hence let's keep the old behaviour at least for now.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-08-16 17:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-09 23:12 [PATCH v2] gpu: host1x: Ignore clients initialization failure Dmitry Osipenko
2018-08-13 17:48 ` Dmitry Osipenko
2018-08-16 17:20 ` Dmitry Osipenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).