From: Vlastimil Babka <vbabka@suse.cz>
To: Michal Hocko <mhocko@suse.com>
Cc: Feng Tang <feng.tang@intel.com>,
Andrew Morton <akpm@linux-foundation.org>,
Johannes Weiner <hannes@cmpxchg.org>,
Matthew Wilcox <willy@infradead.org>,
Mel Gorman <mgorman@suse.de>,
dave.hansen@intel.com, ying.huang@intel.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, Christoph Lameter <cl@linux.com>
Subject: Re: [RFC PATCH 0/2] mm: fix OOMs for binding workloads to movable zone only node
Date: Thu, 5 Nov 2020 14:34:07 +0100 [thread overview]
Message-ID: <222708b7-73e3-65ea-b4db-0ef3b857463d@suse.cz> (raw)
In-Reply-To: <20201105131957.GI21348@dhcp22.suse.cz>
On 11/5/20 2:19 PM, Michal Hocko wrote:
> On Thu 05-11-20 14:14:25, Vlastimil Babka wrote:
>> On 11/5/20 1:58 PM, Michal Hocko wrote:
>> > On Thu 05-11-20 13:53:24, Vlastimil Babka wrote:
>> > > On 11/5/20 1:08 PM, Michal Hocko wrote:
>> > > > On Thu 05-11-20 09:40:28, Feng Tang wrote:
>> > > > > > > Could you be more specific? This sounds like a bug. Allocations
>> > > > > > shouldn't spill over to a node which is not in the cpuset. There are few
>> > > > > > exceptions like IRQ context but that shouldn't happen regurarly.
>> > > > > > > I mean when the docker starts, it will spawn many processes
>> > > which obey
>> > > > > the mem binding set, and they have some kernel page requests, which got
>> > > > > successfully allocated, like the following callstack:
>> > > > > > > [ 567.044953] CPU: 1 PID: 2021 Comm: runc:[1:CHILD]
>> > > Tainted: G W I 5.9.0-rc8+ #6
>> > > > > [ 567.044956] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0051.2016.0804.1114 08/04/2016
>> > > > > [ 567.044958] Call Trace:
>> > > > > [ 567.044972] dump_stack+0x74/0x9a
>> > > > > [ 567.044978] __alloc_pages_nodemask.cold+0x22/0xe5
>> > > > > [ 567.044986] alloc_pages_current+0x87/0xe0
>> > > > > [ 567.044991] allocate_slab+0x2e5/0x4f0
>> > > > > [ 567.044996] ___slab_alloc+0x380/0x5d0
>> > > > > [ 567.045021] __slab_alloc+0x20/0x40
>> > > > > [ 567.045025] kmem_cache_alloc+0x2a0/0x2e0
>> > > > > [ 567.045033] mqueue_alloc_inode+0x1a/0x30
>> > > > > [ 567.045041] alloc_inode+0x22/0xa0
>> > > > > [ 567.045045] new_inode_pseudo+0x12/0x60
>> > > > > [ 567.045049] new_inode+0x17/0x30
>> > > > > [ 567.045052] mqueue_get_inode+0x45/0x3b0
>> > > > > [ 567.045060] mqueue_fill_super+0x41/0x70
>> > > > > [ 567.045067] vfs_get_super+0x7f/0x100
>> > > > > [ 567.045074] get_tree_keyed+0x1d/0x20
>> > > > > [ 567.045080] mqueue_get_tree+0x1c/0x20
>> > > > > [ 567.045086] vfs_get_tree+0x2a/0xc0
>> > > > > [ 567.045092] fc_mount+0x13/0x50
>> > > > > [ 567.045099] mq_create_mount+0x92/0xe0
>> > > > > [ 567.045102] mq_init_ns+0x3b/0x50
>> > > > > [ 567.045106] copy_ipcs+0x10a/0x1b0
>> > > > > [ 567.045113] create_new_namespaces+0xa6/0x2b0
>> > > > > [ 567.045118] unshare_nsproxy_namespaces+0x5a/0xb0
>> > > > > [ 567.045124] ksys_unshare+0x19f/0x360
>> > > > > [ 567.045129] __x64_sys_unshare+0x12/0x20
>> > > > > [ 567.045135] do_syscall_64+0x38/0x90
>> > > > > [ 567.045143] entry_SYSCALL_64_after_hwframe+0x44/0xa9
>> > > > > > > For it, the __alloc_pages_nodemask() will first try
>> > > process's targed
>> > > > > nodemask(unmovable node here), and there is no availabe zone, so it
>> > > > > goes with the NULL nodemask, and get a page in the slowpath.
>> > > > > OK, I see your point now. I was not aware of the slab allocator
>> > > not
>> > > > following cpusets. Sounds like a bug to me.
>> > >
>> > > SLAB and SLUB seem to not care about cpusets in the fast path.
>> >
>> > Is a fallback to a different node which is outside of the cpuset
>> > possible?
>>
>> AFAICS anything in per-cpu cache will be allocated without looking at the
>> cpuset, so it can be outside of the cpuset. In SLUB slowpath,
>> get_partial_node() looking for fallback on the same node will also not look
>> at cpuset. get_any_partial() looking for a fallback allocation on any node
>> does check cpuset_zone_allowed() and obey it strictly. A fallback to page
>> allocator will obey whatever page allocator obeys.
>
> IIUC this means that if there is no strong CPU binding to cpuset nodes
> then a runaway is possible. Albeit only partially and relying on
> somebody to fill up pcp object caches, right?
Seems so.
> Is that an overlook or a decision design or a performance optimization?
... yes :)
More seriously, let's ask Christoph, as that code goes all the way to first SLUB
commit.
On SLAB side, it would seem percpu caches came first, then cpuset support was
added for page allocator, but SLAB was oblivious until it learned some of it in
commit 765c4507af71c to properly support __GFP_THISNODE.
My guess is that the amount of cpuset constraint violation through percpu caches
was never considered to be a problem serious enough to justify making the
fastpaths slower.
next prev parent reply other threads:[~2020-11-05 13:34 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-04 6:10 [RFC PATCH 0/2] mm: fix OOMs for binding workloads to movable zone only node Feng Tang
2020-11-04 6:10 ` [RFC PATCH 1/2] mm, oom: dump meminfo for all memory nodes Feng Tang
2020-11-04 7:18 ` Michal Hocko
2020-11-04 6:10 ` [RFC PATCH 2/2] mm, page_alloc: loose the node binding check to avoid helpless oom killing Feng Tang
2020-11-04 7:23 ` Michal Hocko
2020-11-04 7:13 ` [RFC PATCH 0/2] mm: fix OOMs for binding workloads to movable zone only node Michal Hocko
2020-11-04 7:38 ` Feng Tang
2020-11-04 7:58 ` Michal Hocko
2020-11-04 8:40 ` Feng Tang
2020-11-04 8:53 ` Michal Hocko
2020-11-05 1:40 ` Feng Tang
2020-11-05 12:08 ` Michal Hocko
2020-11-05 12:53 ` Vlastimil Babka
2020-11-05 12:58 ` Michal Hocko
2020-11-05 13:07 ` Feng Tang
2020-11-05 13:12 ` Michal Hocko
2020-11-05 13:43 ` Feng Tang
2020-11-05 16:16 ` Michal Hocko
2020-11-06 7:06 ` Feng Tang
2020-11-06 8:10 ` Michal Hocko
2020-11-06 9:08 ` Feng Tang
2020-11-06 10:35 ` Michal Hocko
2020-11-05 13:14 ` Vlastimil Babka
2020-11-05 13:19 ` Michal Hocko
2020-11-05 13:34 ` Vlastimil Babka [this message]
2020-11-06 4:32 ` Huang, Ying
2020-11-06 7:43 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=222708b7-73e3-65ea-b4db-0ef3b857463d@suse.cz \
--to=vbabka@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=dave.hansen@intel.com \
--cc=feng.tang@intel.com \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.com \
--cc=willy@infradead.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).