* [PATCH v2] drm: dw-hdmi-i2s: enable audio clock in audio_startup
@ 2019-09-02 3:54 Cheng-Yi Chiang
2019-09-02 9:42 ` Neil Armstrong
0 siblings, 1 reply; 4+ messages in thread
From: Cheng-Yi Chiang @ 2019-09-02 3:54 UTC (permalink / raw)
To: linux-kernel
Cc: alsa-devel, linux-arm-kernel, linux-rockchip, a.hajda,
Laurent.pinchart, airlied, daniel, kuninori.morimoto.gx, sam,
cychiang, dianders, dgreid, tzungbi, zhengxing, cain.cai,
eddie.cai, jeffy.chen, enric.balletbo, dri-devel, Jonas Karlman
In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.
On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Douglas Anderson <dianders@chromium.org>
---
Changes from v1:
1. Move audio_startup to the front of audio_shutdown.
2. Fix the indentation of audio_startup equal sign using tab.
3. Rebase the patch on linux-next/master.
4. Add Reviewed-by and Tested-by fields from dianders@chromium.org.
5. Add Reviewed-by field from jonas@kwiboo.se.
drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 1d15cf9b6821..34d8e837555f 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -109,6 +109,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
hdmi_write(audio, conf0, HDMI_AUD_CONF0);
hdmi_write(audio, conf1, HDMI_AUD_CONF1);
+ return 0;
+}
+
+static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
+{
+ struct dw_hdmi_i2s_audio_data *audio = data;
+ struct dw_hdmi *hdmi = audio->hdmi;
+
dw_hdmi_audio_enable(hdmi);
return 0;
@@ -153,6 +161,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
.hw_params = dw_hdmi_i2s_hw_params,
+ .audio_startup = dw_hdmi_i2s_audio_startup,
.audio_shutdown = dw_hdmi_i2s_audio_shutdown,
.get_eld = dw_hdmi_i2s_get_eld,
.get_dai_id = dw_hdmi_i2s_get_dai_id,
--
2.23.0.187.g17f5b7556c-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] drm: dw-hdmi-i2s: enable audio clock in audio_startup
2019-09-02 3:54 [PATCH v2] drm: dw-hdmi-i2s: enable audio clock in audio_startup Cheng-Yi Chiang
@ 2019-09-02 9:42 ` Neil Armstrong
2019-09-02 10:32 ` Jonas Karlman
0 siblings, 1 reply; 4+ messages in thread
From: Neil Armstrong @ 2019-09-02 9:42 UTC (permalink / raw)
To: Cheng-Yi Chiang, linux-kernel
Cc: alsa-devel, tzungbi, zhengxing, kuninori.morimoto.gx, a.hajda,
airlied, jeffy.chen, dianders, dri-devel, cain.cai,
linux-rockchip, Jonas Karlman, eddie.cai, Laurent.pinchart,
daniel, enric.balletbo, dgreid, sam, linux-arm-kernel
Hi,
On 02/09/2019 05:54, Cheng-Yi Chiang wrote:
> In the designware databook, the sequence of enabling audio clock and
> setting format is not clearly specified.
> Currently, audio clock is enabled in the end of hw_param ops after
> setting format.
>
> On some monitors, there is a possibility that audio does not come out.
> Fix this by enabling audio clock in audio_startup ops
> before hw_param ops setting format.
>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
> Tested-by: Douglas Anderson <dianders@chromium.org>
> ---
> Changes from v1:
> 1. Move audio_startup to the front of audio_shutdown.
> 2. Fix the indentation of audio_startup equal sign using tab.
> 3. Rebase the patch on linux-next/master.
> 4. Add Reviewed-by and Tested-by fields from dianders@chromium.org.
> 5. Add Reviewed-by field from jonas@kwiboo.se.
>
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index 1d15cf9b6821..34d8e837555f 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -109,6 +109,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
> hdmi_write(audio, conf0, HDMI_AUD_CONF0);
> hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>
> + return 0;
> +}
> +
> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> +{
> + struct dw_hdmi_i2s_audio_data *audio = data;
> + struct dw_hdmi *hdmi = audio->hdmi;
> +
> dw_hdmi_audio_enable(hdmi);
>
> return 0;
> @@ -153,6 +161,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>
> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> .hw_params = dw_hdmi_i2s_hw_params,
> + .audio_startup = dw_hdmi_i2s_audio_startup,
> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
> .get_eld = dw_hdmi_i2s_get_eld,
> .get_dai_id = dw_hdmi_i2s_get_dai_id,
>
Looks sane, Jonas should I apply it now it's rebased ?
Neil
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] drm: dw-hdmi-i2s: enable audio clock in audio_startup
2019-09-02 9:42 ` Neil Armstrong
@ 2019-09-02 10:32 ` Jonas Karlman
2019-09-02 11:57 ` Neil Armstrong
0 siblings, 1 reply; 4+ messages in thread
From: Jonas Karlman @ 2019-09-02 10:32 UTC (permalink / raw)
To: Neil Armstrong, Cheng-Yi Chiang, linux-kernel
Cc: alsa-devel, tzungbi, zhengxing, kuninori.morimoto.gx, a.hajda,
airlied, jeffy.chen, dianders, dri-devel, cain.cai,
linux-rockchip, eddie.cai, Laurent.pinchart, daniel,
enric.balletbo, dgreid, sam, linux-arm-kernel
On 2019-09-02 11:42, Neil Armstrong wrote:
> Hi,
>
> On 02/09/2019 05:54, Cheng-Yi Chiang wrote:
>> In the designware databook, the sequence of enabling audio clock and
>> setting format is not clearly specified.
>> Currently, audio clock is enabled in the end of hw_param ops after
>> setting format.
>>
>> On some monitors, there is a possibility that audio does not come out.
>> Fix this by enabling audio clock in audio_startup ops
>> before hw_param ops setting format.
>>
>> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
>> Tested-by: Douglas Anderson <dianders@chromium.org>
>> ---
>> Changes from v1:
>> 1. Move audio_startup to the front of audio_shutdown.
>> 2. Fix the indentation of audio_startup equal sign using tab.
>> 3. Rebase the patch on linux-next/master.
>> 4. Add Reviewed-by and Tested-by fields from dianders@chromium.org.
>> 5. Add Reviewed-by field from jonas@kwiboo.se.
>>
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>> index 1d15cf9b6821..34d8e837555f 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>> @@ -109,6 +109,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
>> hdmi_write(audio, conf0, HDMI_AUD_CONF0);
>> hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>>
>> + return 0;
>> +}
>> +
>> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
>> +{
>> + struct dw_hdmi_i2s_audio_data *audio = data;
>> + struct dw_hdmi *hdmi = audio->hdmi;
>> +
>> dw_hdmi_audio_enable(hdmi);
>>
>> return 0;
>> @@ -153,6 +161,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>>
>> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
>> .hw_params = dw_hdmi_i2s_hw_params,
>> + .audio_startup = dw_hdmi_i2s_audio_startup,
>> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
>> .get_eld = dw_hdmi_i2s_get_eld,
>> .get_dai_id = dw_hdmi_i2s_get_dai_id,
>>
> Looks sane, Jonas should I apply it now it's rebased ?
Sure, looks sane and compiles without warnings on my build host.
Regards,
Jonas
>
> Neil
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] drm: dw-hdmi-i2s: enable audio clock in audio_startup
2019-09-02 10:32 ` Jonas Karlman
@ 2019-09-02 11:57 ` Neil Armstrong
0 siblings, 0 replies; 4+ messages in thread
From: Neil Armstrong @ 2019-09-02 11:57 UTC (permalink / raw)
To: Jonas Karlman, Cheng-Yi Chiang, linux-kernel
Cc: alsa-devel, tzungbi, zhengxing, kuninori.morimoto.gx, a.hajda,
airlied, jeffy.chen, dianders, dri-devel, cain.cai,
linux-rockchip, eddie.cai, Laurent.pinchart, daniel,
enric.balletbo, dgreid, sam, linux-arm-kernel
On 02/09/2019 12:32, Jonas Karlman wrote:
> On 2019-09-02 11:42, Neil Armstrong wrote:
>> Hi,
>>
>> On 02/09/2019 05:54, Cheng-Yi Chiang wrote:
>>> In the designware databook, the sequence of enabling audio clock and
>>> setting format is not clearly specified.
>>> Currently, audio clock is enabled in the end of hw_param ops after
>>> setting format.
>>>
>>> On some monitors, there is a possibility that audio does not come out.
>>> Fix this by enabling audio clock in audio_startup ops
>>> before hw_param ops setting format.
>>>
>>> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
>>> Tested-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>>> Changes from v1:
>>> 1. Move audio_startup to the front of audio_shutdown.
>>> 2. Fix the indentation of audio_startup equal sign using tab.
>>> 3. Rebase the patch on linux-next/master.
>>> 4. Add Reviewed-by and Tested-by fields from dianders@chromium.org.
>>> 5. Add Reviewed-by field from jonas@kwiboo.se.
>>>
>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
>>> 1 file changed, 9 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>>> index 1d15cf9b6821..34d8e837555f 100644
>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>>> @@ -109,6 +109,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
>>> hdmi_write(audio, conf0, HDMI_AUD_CONF0);
>>> hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>>>
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
>>> +{
>>> + struct dw_hdmi_i2s_audio_data *audio = data;
>>> + struct dw_hdmi *hdmi = audio->hdmi;
>>> +
>>> dw_hdmi_audio_enable(hdmi);
>>>
>>> return 0;
>>> @@ -153,6 +161,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>>>
>>> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
>>> .hw_params = dw_hdmi_i2s_hw_params,
>>> + .audio_startup = dw_hdmi_i2s_audio_startup,
>>> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
>>> .get_eld = dw_hdmi_i2s_get_eld,
>>> .get_dai_id = dw_hdmi_i2s_get_dai_id,
>>>
>> Looks sane, Jonas should I apply it now it's rebased ?
>
> Sure, looks sane and compiles without warnings on my build host.
Thx, Applied to drm-misc-next
Neil
>
> Regards,
> Jonas
>
>>
>> Neil
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-09-02 11:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-02 3:54 [PATCH v2] drm: dw-hdmi-i2s: enable audio clock in audio_startup Cheng-Yi Chiang
2019-09-02 9:42 ` Neil Armstrong
2019-09-02 10:32 ` Jonas Karlman
2019-09-02 11:57 ` Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).