linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chao Yu <yuchao0@huawei.com>
To: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-f2fs-devel@lists.sourceforge.net>
Subject: Re: [f2fs-dev] [PATCH] f2fs: fix quota info to adjust recovered data
Date: Wed, 12 Sep 2018 09:46:43 +0800	[thread overview]
Message-ID: <24ee1c19-ccc1-31db-12d0-30ac76fd645e@huawei.com> (raw)
In-Reply-To: <ffbfbc85-f7ac-dd5c-b20f-d08868adb4ee@huawei.com>

On 2018/9/12 9:40, Chao Yu wrote:
> On 2018/9/12 9:25, Jaegeuk Kim wrote:
>> On 09/12, Chao Yu wrote:
>>> On 2018/9/12 8:27, Jaegeuk Kim wrote:
>>>> On 09/11, Jaegeuk Kim wrote:
>>>>> On 09/12, Chao Yu wrote:
>>>>>> On 2018/9/12 4:15, Jaegeuk Kim wrote:
>>>>>>> fsck.f2fs is able to recover the quota structure, since roll-forward recovery
>>>>>>> can recover it based on previous user information.
>>>>>>
>>>>>> I didn't get it, both fsck and kernel recover quota file based all inodes'
>>>>>> uid/gid/prjid, if {x}id didn't change, wouldn't those two recovery result be the
>>>>>> same?
>>>>>
>>>>> I thought that, but had to add this, since I was encountering quota errors right
>>>>> after getting some files recovered. And, I thought it'd make it more safe to do
>>>>> fsck after roll-forward recovery.
>>>>>
>>>>> Anyway, let me test again without this patch for a while.
>>>>
>>>> Hmm, I just got a fsck failure right after some files recovered.
>>>
>>> To make sure, do you test with "f2fs: guarantee journalled quota data by
>>> checkpoint"? if not, I think there is no guarantee that f2fs can recover
>>> quote info into correct quote file, because, in last checkpoint, quota file
>>> may was corrupted/inconsistent. Right?
> 
> Oh, I forget to mention that, I add a patch to fsck to let it noticing
> CP_QUOTA_NEED_FSCK_FLAG flag, and by default, fsck will fix corrupted quote
> file if the flag is set, but w/o this flag, quota file is still corrupted
> detected by fsck, I guess there is bug in v8.

In v8, there are two cases we didn't guarantee quota file's consistence:
1. flush time in block_operation exceed a threshold.
2. dquot subsystem error occurs.

For above case, fsck should repair the quota file by default.

> 
> Can you add that in fsck too? so we can separate real kernel bug and quota
> file corruption due to dquot subsystem error caused like below case:
> 
> +static int f2fs_dquot_acquire(struct dquot *dquot)
> +{
> +	int ret;
> +
> +	ret = dquot_acquire(dquot);
> +	if (ret == -ENOSPC || ret == -EIO)
> +		set_sbi_flag(F2FS_SB(dquot->dq_sb), SBI_QUOTA_NEED_REPAIR);
> +	return ret;
> +}
> 
>>
>> I hit the failure with v8. And, the test scenario is 1) enable fault injection
>> 2) run fsstress, 3) call shutdowon, 4) kill fsstress, 5) unmount, 6) fsck, 7)
>> mount, 8) fsck, 9) go 1).

8) fsck is do fscking in a mounted image?

Thanks,

>>
>> So, I'm hitting failure in 8) fsck. I expect 6) fsck should fix any corruption
>> and 7) recovered some files on clean checkpoint.
> 
> I see, I can add this case too, does this exist in your xfstest tree in github?
> 
> Thanks,
> 
>>
>> Thanks,
>>
>>>
>>> Thanks,
>>>
>>>>
>>>>>
>>>>> Thanks,
>>>>>
>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>>>
>>>>>>> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
>>>>>>> ---
>>>>>>>  fs/f2fs/recovery.c | 3 +++
>>>>>>>  1 file changed, 3 insertions(+)
>>>>>>>
>>>>>>> diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
>>>>>>> index 95511ed11a22..1fde86a2107e 100644
>>>>>>> --- a/fs/f2fs/recovery.c
>>>>>>> +++ b/fs/f2fs/recovery.c
>>>>>>> @@ -675,6 +675,9 @@ int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
>>>>>>>  
>>>>>>>  	need_writecp = true;
>>>>>>>  
>>>>>>> +	/* quota is not fully updated due to the lack of user information. */
>>>>>>> +	set_sbi_flag(sbi, SBI_NEED_FSCK);
>>>>>>> +
>>>>>>>  	/* step #2: recover data */
>>>>>>>  	err = recover_data(sbi, &inode_list, &dir_list);
>>>>>>>  	if (!err)
>>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Linux-f2fs-devel mailing list
>>>>> Linux-f2fs-devel@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
>>>>
>>>> .
>>>>
>>
>> .
>>
> 
> 
> .
> 


  reply	other threads:[~2018-09-12  1:46 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-11 20:15 [PATCH] f2fs: fix quota info to adjust recovered data Jaegeuk Kim
2018-09-11 23:51 ` [f2fs-dev] " Chao Yu
2018-09-12  0:06   ` Jaegeuk Kim
2018-09-12  0:27     ` Jaegeuk Kim
2018-09-12  1:13       ` Chao Yu
2018-09-12  1:25         ` Jaegeuk Kim
2018-09-12  1:40           ` Chao Yu
2018-09-12  1:46             ` Chao Yu [this message]
2018-09-12 19:54               ` Jaegeuk Kim
2018-09-12 23:28                 ` Chao Yu
2018-09-18  1:19                   ` Jaegeuk Kim
2018-09-18  1:38                     ` Chao Yu
2018-09-18  2:05                       ` Jaegeuk Kim
2018-09-18 10:13                         ` Chao Yu
2018-09-18 16:45                           ` Jaegeuk Kim
2018-09-19  1:38                             ` Chao Yu
2018-09-19 22:38                               ` Jaegeuk Kim
2018-09-20  9:46                                 ` Chao Yu
2018-09-20 21:42                                   ` Jaegeuk Kim
2018-09-21  7:48                                     ` Chao Yu
2018-09-26  0:29                                       ` Jaegeuk Kim
2018-09-26  1:21                                         ` Chao Yu
2018-09-26  1:44                                           ` Jaegeuk Kim
2018-09-26  2:06                                             ` Chao Yu
2018-09-26  2:09                                               ` Jaegeuk Kim
2018-09-26  2:14                                                 ` Chao Yu
2018-09-27  1:16                                                 ` Chao Yu
2018-09-28 17:37                                                   ` Jaegeuk Kim
2018-09-28 23:40                                                     ` Jaegeuk Kim
2018-09-29 10:38                                                       ` Chao Yu
2018-09-30 23:58                                                         ` Jaegeuk Kim
2018-10-01  0:35                                                           ` Chao Yu
2018-10-01  1:27                                                             ` Jaegeuk Kim
2018-10-01  1:37                                                               ` Chao Yu
2018-09-12  2:46             ` Jaegeuk Kim
2018-09-12  2:57               ` Chao Yu
2018-09-12 19:50                 ` Jaegeuk Kim
2018-09-12 23:30                   ` Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=24ee1c19-ccc1-31db-12d0-30ac76fd645e@huawei.com \
    --to=yuchao0@huawei.com \
    --cc=chao@kernel.org \
    --cc=jaegeuk@kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).