linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: Justin Swartz <justin.swartz@risingedge.co.za>
Cc: Johan Jonker <jbx6244@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	mark.rutland@arm.com, robh+dt@kernel.org
Subject: Re: [PATCH v4 2/3] ARM: dts: rockchip: add rga node for rk322x
Date: Sat, 18 Apr 2020 12:53:30 +0200	[thread overview]
Message-ID: <2533855.f5ZhyS2AsA@phil> (raw)
In-Reply-To: <b77422198df7c285d824086131371284@risingedge.co.za>

Am Samstag, 18. April 2020, 11:56:03 CEST schrieb Justin Swartz:
> Hi Johan, Heiko,
> 
> On 2020-04-18 11:49, Heiko Stuebner wrote:
> 
> > Am Samstag, 18. April 2020, 11:15:27 CEST schrieb Johan Jonker:
> > 
> >> Hi Justin, Heiko,
> >> 
> >> In the discussion about "rockchip,px30-rga" it was mentioned that:
> >> "no status for soc internal components without any board-specifics".
> >> The binding is in mainline, but the dts node is missing I think.
> >> Should this also be changed?
> > 
> > yep, drop the status disabled from the dtsi and that then results
> > in not needing the board-level enablement
> > 
> > (background: rga is a simple mem2mem device without any
> > board-specific hooks)
> 
> Shall I submit version 5 of this patch series?

I guess so ... especially as we expect patch1 to go through the
media tree and sending a new version might serve as a ping :-)
and include the Ack by Rob for easy applying


Heiko


> 
> > Johan
> > 
> > +&rga {
> > +    status = "okay";
> > +};
> > +
> > 
> > Add a node to define the presence of RGA, a 2D raster
> > graphic acceleration unit.
> > 
> > Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
> > ---
> > arch/arm/boot/dts/rk322x.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> > b/arch/arm/boot/dts/rk322x.dtsi
> > index 340ed6ccb..29d50bebc 100644
> > --- a/arch/arm/boot/dts/rk322x.dtsi
> > +++ b/arch/arm/boot/dts/rk322x.dtsi
> > @@ -621,6 +621,17 @@
> > status = "disabled";
> > };
> > 
> > +    rga: rga@20060000 {
> > +        compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga";
> > +        reg = <0x20060000 0x1000>;
> > +        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> > +        clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
> > +        clock-names = "aclk", "hclk", "sclk";
> > +        resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru 
> > SRST_RGA_H>;
> > +        reset-names = "core", "axi", "ahb";
> > +        status = "disabled";
> > remove?
> > 
> > +    };
> > +
> > iep_mmu: iommu@20070800 {
> > compatible = "rockchip,iommu";
> > reg = <0x20070800 0x100>;
> 





  reply	other threads:[~2020-04-18 10:53 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-03 22:30 [PATCH v4 0/3] Add rga to rk322x device tree Justin Swartz
2020-02-03 22:40 ` [PATCH v4 1/3] [media] dt-bindings: Add binding for rk3228 rga Justin Swartz
2020-02-06 19:06   ` Rob Herring
2020-03-01  0:29   ` Heiko Stuebner
2020-02-03 22:40 ` [PATCH v4 2/3] ARM: dts: rockchip: add rga node for rk322x Justin Swartz
2020-04-18  9:15   ` Johan Jonker
2020-04-18  9:49     ` Heiko Stuebner
2020-04-18  9:56       ` Justin Swartz
2020-04-18 10:53         ` Heiko Stuebner [this message]
2020-04-18 12:14           ` Johan Jonker
2020-04-19 12:51             ` [PATCH v5 0/1] Add rga to rk322x device tree Justin Swartz
2020-05-18 22:52               ` Heiko Stuebner
2020-04-19 12:51             ` [PATCH v5 1/1] ARM: dts: rockchip: add rga node for rk322x Justin Swartz
2020-02-03 22:40 ` [PATCH v4 3/3] ARM: dts: rockchip: enable rga for rk3229-xms6 Justin Swartz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2533855.f5ZhyS2AsA@phil \
    --to=heiko@sntech.de \
    --cc=devicetree@vger.kernel.org \
    --cc=jbx6244@gmail.com \
    --cc=justin.swartz@risingedge.co.za \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).