* [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them
@ 2013-04-15 7:05 Viresh Kumar
2013-04-15 7:05 ` [PATCH 2/2] cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates Viresh Kumar
2013-04-21 23:35 ` [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them Rafael J. Wysocki
0 siblings, 2 replies; 3+ messages in thread
From: Viresh Kumar @ 2013-04-15 7:05 UTC (permalink / raw)
To: rjw
Cc: cpufreq, linux-pm, linux-kernel, robin.randhawa, Steve.Bannister,
Liviu.Dudau, charles.garcia-tobin, arvind.chauhan, linaro-kernel,
patches, Viresh Kumar
DT nodes should be put using of_node_put() to balance their usage counts. This
is not done properly in ARM's big LITTLE driver. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
Hi Rafael,
These are fixes for 3.10
drivers/cpufreq/arm_big_little_dt.c | 43 +++++++++++++++++++++++++------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 452ff46..44be311 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -31,22 +31,28 @@
static int dt_init_opp_table(struct device *cpu_dev)
{
- struct device_node *np = NULL;
+ struct device_node *np, *parent;
int count = 0, ret;
- for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ pr_err("failed to find OF /cpus\n");
+ return -ENOENT;
+ }
+
+ for_each_child_of_node(parent, np) {
if (count++ != cpu_dev->id)
continue;
- if (!of_get_property(np, "operating-points", NULL))
- return -ENODATA;
-
- cpu_dev->of_node = np;
-
- ret = of_init_opp_table(cpu_dev);
- if (ret)
- return ret;
-
- return 0;
+ if (!of_get_property(np, "operating-points", NULL)) {
+ ret = -ENODATA;
+ } else {
+ cpu_dev->of_node = np;
+ ret = of_init_opp_table(cpu_dev);
+ }
+ of_node_put(np);
+ of_node_put(parent);
+
+ return ret;
}
return -ENODEV;
@@ -54,15 +60,24 @@ static int dt_init_opp_table(struct device *cpu_dev)
static int dt_get_transition_latency(struct device *cpu_dev)
{
- struct device_node *np = NULL;
+ struct device_node *np, *parent;
u32 transition_latency = CPUFREQ_ETERNAL;
int count = 0;
- for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ pr_err("failed to find OF /cpus\n");
+ return -ENOENT;
+ }
+
+ for_each_child_of_node(parent, np) {
if (count++ != cpu_dev->id)
continue;
of_property_read_u32(np, "clock-latency", &transition_latency);
+ of_node_put(np);
+ of_node_put(parent);
+
return 0;
}
--
1.7.12.rc2.18.g61b472e
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
2013-04-15 7:05 [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them Viresh Kumar
@ 2013-04-15 7:05 ` Viresh Kumar
2013-04-21 23:35 ` [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them Rafael J. Wysocki
1 sibling, 0 replies; 3+ messages in thread
From: Viresh Kumar @ 2013-04-15 7:05 UTC (permalink / raw)
To: rjw
Cc: cpufreq, linux-pm, linux-kernel, robin.randhawa, Steve.Bannister,
Liviu.Dudau, charles.garcia-tobin, arvind.chauhan, linaro-kernel,
patches, Viresh Kumar
This driver isn't updated to work with latest cpufreq core updates that happened
recently. Fix them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
As original patch breaks compilation, its best to merge this patch with original
patch.
drivers/cpufreq/arm_big_little.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index 1d29d1a..dbdf677 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -77,8 +77,6 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
target_freq, relation, &freq_tab_idx);
freqs.new = freq_table[cur_cluster][freq_tab_idx].frequency;
- freqs.cpu = policy->cpu;
-
pr_debug("%s: cpu: %d, cluster: %d, oldfreq: %d, target freq: %d, new freq: %d\n",
__func__, cpu, cur_cluster, freqs.old, target_freq,
freqs.new);
@@ -86,8 +84,7 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
if (freqs.old == freqs.new)
return 0;
- for_each_cpu(freqs.cpu, policy->cpus)
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000);
if (ret) {
@@ -97,8 +94,7 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
policy->cur = freqs.new;
- for_each_cpu(freqs.cpu, policy->cpus)
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
return ret;
}
@@ -231,7 +227,7 @@ static struct cpufreq_driver bL_cpufreq_driver = {
.get = bL_cpufreq_get,
.init = bL_cpufreq_init,
.exit = bL_cpufreq_exit,
- .have_multiple_policies = true,
+ .have_governor_per_policy = true,
.attr = bL_cpufreq_attr,
};
--
1.7.12.rc2.18.g61b472e
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them
2013-04-15 7:05 [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them Viresh Kumar
2013-04-15 7:05 ` [PATCH 2/2] cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates Viresh Kumar
@ 2013-04-21 23:35 ` Rafael J. Wysocki
1 sibling, 0 replies; 3+ messages in thread
From: Rafael J. Wysocki @ 2013-04-21 23:35 UTC (permalink / raw)
To: Viresh Kumar
Cc: cpufreq, linux-pm, linux-kernel, robin.randhawa, Steve.Bannister,
Liviu.Dudau, charles.garcia-tobin, arvind.chauhan, linaro-kernel,
patches
On Monday, April 15, 2013 12:35:24 PM Viresh Kumar wrote:
> DT nodes should be put using of_node_put() to balance their usage counts. This
> is not done properly in ARM's big LITTLE driver. Fix it.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> Hi Rafael,
>
> These are fixes for 3.10
Both applied.
Thanks,
Rafael
> drivers/cpufreq/arm_big_little_dt.c | 43 +++++++++++++++++++++++++------------
> 1 file changed, 29 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
> index 452ff46..44be311 100644
> --- a/drivers/cpufreq/arm_big_little_dt.c
> +++ b/drivers/cpufreq/arm_big_little_dt.c
> @@ -31,22 +31,28 @@
>
> static int dt_init_opp_table(struct device *cpu_dev)
> {
> - struct device_node *np = NULL;
> + struct device_node *np, *parent;
> int count = 0, ret;
>
> - for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
> + parent = of_find_node_by_path("/cpus");
> + if (!parent) {
> + pr_err("failed to find OF /cpus\n");
> + return -ENOENT;
> + }
> +
> + for_each_child_of_node(parent, np) {
> if (count++ != cpu_dev->id)
> continue;
> - if (!of_get_property(np, "operating-points", NULL))
> - return -ENODATA;
> -
> - cpu_dev->of_node = np;
> -
> - ret = of_init_opp_table(cpu_dev);
> - if (ret)
> - return ret;
> -
> - return 0;
> + if (!of_get_property(np, "operating-points", NULL)) {
> + ret = -ENODATA;
> + } else {
> + cpu_dev->of_node = np;
> + ret = of_init_opp_table(cpu_dev);
> + }
> + of_node_put(np);
> + of_node_put(parent);
> +
> + return ret;
> }
>
> return -ENODEV;
> @@ -54,15 +60,24 @@ static int dt_init_opp_table(struct device *cpu_dev)
>
> static int dt_get_transition_latency(struct device *cpu_dev)
> {
> - struct device_node *np = NULL;
> + struct device_node *np, *parent;
> u32 transition_latency = CPUFREQ_ETERNAL;
> int count = 0;
>
> - for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
> + parent = of_find_node_by_path("/cpus");
> + if (!parent) {
> + pr_err("failed to find OF /cpus\n");
> + return -ENOENT;
> + }
> +
> + for_each_child_of_node(parent, np) {
> if (count++ != cpu_dev->id)
> continue;
>
> of_property_read_u32(np, "clock-latency", &transition_latency);
> + of_node_put(np);
> + of_node_put(parent);
> +
> return 0;
> }
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-04-21 23:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-15 7:05 [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them Viresh Kumar
2013-04-15 7:05 ` [PATCH 2/2] cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates Viresh Kumar
2013-04-21 23:35 ` [PATCH 1/2] cpufreq: ARM big LITTLE: put DT nodes after using them Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).