[PATCH v4] Bluetooth: btusb: re-definition for board_id in struct qca_version

[PATCH v4] Bluetooth: btusb: re-definition for board_id in struct qca_version

[tjiang]

The board ID should be split into two bytes.
The 1st byte is chip ID, and the 2nd byte is platform ID.
For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID.
we have several platforms, and platform IDs are continuously added.
We would not distinguish different chips if we get these mixed up.
Platform ID:
0x00 is for Mobile
0x01 is for X86
0x02 is for Automotive
0x03 is for Consumer electronic

Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
---
  drivers/bluetooth/btusb.c | 15 +++++++++++++--
  1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 46d892bbde62..c2a48824ab1e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2883,7 +2883,8 @@ struct qca_version {
  	__le32	rom_version;
  	__le32	patch_version;
  	__le32	ram_version;
-	__le16	board_id;
+	__u8	chip_id;
+	__u8	platform_id;
  	__le16	flag;
  	__u8	reserved[4];
  } __packed;
@@ -3072,7 +3073,17 @@ static void btusb_generate_qca_nvm_name(char 
*fwname, size_t max_size,
  	u16 flag = le16_to_cpu(ver->flag);

  	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
-		u16 board_id = le16_to_cpu(ver->board_id);
+		/* The board_id should be split into two bytes
+		 * The 1st byte is chip ID, and the 2nd byte is platform ID
+		 * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID
+		 * Currently we have several platforms, and platform IDs are 
continuously added.
+		 * Platform ID:
+		 * 0x00 is for Mobile
+		 * 0x01 is for X86
+		 * 0x02 is for Automotive
+		 * 0x03 is for Consumer electronic
+		 */
+		u16 board_id = (ver->chip_id << 8) + ver->platform_id;
  		const char *variant;

  		switch (le32_to_cpu(ver->ram_version)) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, a Linux Foundation Collaborative Project

Re: [PATCH v4] Bluetooth: btusb: re-definition for board_id in struct qca_version

[tjiang]

Hi Marcel:
   I modified the code as you required, could you help merge it ? thank 
you.

regards.
tim


On 2021-11-16 12:48, tjiang@codeaurora.org wrote:
> The board ID should be split into two bytes.
> The 1st byte is chip ID, and the 2nd byte is platform ID.
> For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID.
> we have several platforms, and platform IDs are continuously added.
> We would not distinguish different chips if we get these mixed up.
> Platform ID:
> 0x00 is for Mobile
> 0x01 is for X86
> 0x02 is for Automotive
> 0x03 is for Consumer electronic
> 
> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> ---
>  drivers/bluetooth/btusb.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 46d892bbde62..c2a48824ab1e 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2883,7 +2883,8 @@ struct qca_version {
>  	__le32	rom_version;
>  	__le32	patch_version;
>  	__le32	ram_version;
> -	__le16	board_id;
> +	__u8	chip_id;
> +	__u8	platform_id;
>  	__le16	flag;
>  	__u8	reserved[4];
>  } __packed;
> @@ -3072,7 +3073,17 @@ static void btusb_generate_qca_nvm_name(char
> *fwname, size_t max_size,
>  	u16 flag = le16_to_cpu(ver->flag);
> 
>  	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> -		u16 board_id = le16_to_cpu(ver->board_id);
> +		/* The board_id should be split into two bytes
> +		 * The 1st byte is chip ID, and the 2nd byte is platform ID
> +		 * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip 
> ID
> +		 * Currently we have several platforms, and platform IDs are
> continuously added.
> +		 * Platform ID:
> +		 * 0x00 is for Mobile
> +		 * 0x01 is for X86
> +		 * 0x02 is for Automotive
> +		 * 0x03 is for Consumer electronic
> +		 */
> +		u16 board_id = (ver->chip_id << 8) + ver->platform_id;
>  		const char *variant;
> 
>  		switch (le32_to_cpu(ver->ram_version)) {

Re: [PATCH v4] Bluetooth: btusb: re-definition for board_id in struct qca_version

[Marcel Holtmann]

Hi Tim,

> The board ID should be split into two bytes.
> The 1st byte is chip ID, and the 2nd byte is platform ID.
> For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID.
> we have several platforms, and platform IDs are continuously added.
> We would not distinguish different chips if we get these mixed up.
> Platform ID:
> 0x00 is for Mobile
> 0x01 is for X86
> 0x02 is for Automotive
> 0x03 is for Consumer electronic
> 
> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> ---
> drivers/bluetooth/btusb.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)

Patch has been applied to bluetooth-next tree.

Regards

Marcel