[PATCH v2 1/9] dt-bindings: ufs: qcom: Add sm6115 binding

[PATCH v2 1/9] dt-bindings: ufs: qcom: Add sm6115 binding

[Iskren Chernev]

Add SM6115 UFS to DT schema.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../devicetree/bindings/ufs/qcom,ufs.yaml     | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index f2d6298d926c..be55a5dfc68f 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -28,6 +28,7 @@ properties:
           - qcom,msm8998-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
+          - qcom,sm6115-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -178,6 +179,31 @@ allOf:
           minItems: 1
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: core_clk_ice
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+
     # TODO: define clock bindings for qcom,msm8994-ufshc
 
 unevaluatedProperties: false
-- 
2.37.2

[PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM

[Iskren Chernev]

Document the compatible for Qualcomm  SM6115 SCM.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 9fdeee07702f..c5b76c9f7ad0 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -44,6 +44,7 @@ properties:
           - qcom,scm-sdm845
           - qcom,scm-sdx55
           - qcom,scm-sdx65
+          - qcom,scm-sm6115
           - qcom,scm-sm6125
           - qcom,scm-sm6350
           - qcom,scm-sm8150
-- 
2.37.2

[PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115

[Iskren Chernev]

Document SoC compatible for sm6115.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index dede8892ee01..54053e16b8fd 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -26,6 +26,7 @@ properties:
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom
           - qcom,sdm845-qfprom
+          - qcom,sm6115-qfprom
       - const: qcom,qfprom
 
   reg:
-- 
2.37.2

[PATCH v2 4/9] dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges

[Iskren Chernev]

Ideally this and similar common properties will be inherited so you
won't need to paste them in every pinctrl binding.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml        | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index a7a2bb8bff46..d8443811767d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -49,6 +49,8 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  gpio-reserved-ranges: true
+
   wakeup-parent: true
 
 #PIN CONFIGURATION NODES
-- 
2.37.2

[PATCH v2 5/9] dt-bindings: arm: cpus: Add kryo240 compatible

[Iskren Chernev]

Kryo240 is found in SM4250, the slower sibling of the SM6115.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index a07c5bac7c46..5c13b73e4d57 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -174,6 +174,7 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo240
       - qcom,kryo250
       - qcom,kryo260
       - qcom,kryo280
-- 
2.37.2

[PATCH v2 6/9] dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone

[Iskren Chernev]

oneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon
SM4250 SoC.

Add support for the same in dt-bindings.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 19c2f4314741..63cc41cd0119 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -54,6 +54,8 @@ description: |
         sdm845
         sdx55
         sdx65
+        sm4250
+        sm6115
         sm6125
         sm6350
         sm7225
@@ -670,6 +672,11 @@ properties:
               - xiaomi,polaris
           - const: qcom,sdm845
 
+      - items:
+          - enum:
+              - oneplus,billie2
+          - const: qcom,sm4250
+
       - items:
           - enum:
               - sony,pdx201
-- 
2.37.2

[PATCH v2 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi

[Iskren Chernev]

Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
Remaining issues from make dtbs_check:
- qcom,glink-rpm -- this is still in a txt file
- rpm-requests: qcom,glink-channels -- according to txt file, it is allowed
  property
- pinctrl -- the existing bindings should support both simple (single pin)
  and multi-block pinctr blocks (this commit contains multi-block only).
  However it doesn't work. This block needs to be revisited:

    #PIN CONFIGURATION NODES
    patternProperties:
      '-state$':
        oneOf:
          - $ref: "#/$defs/qcom-sm6115-tlmm-state"
          - patternProperties:
              ".*":
                $ref: "#/$defs/qcom-sm6115-tlmm-state"

- ufs phy: binding complains about missing #clock and #phy -cells. The
  outer binding is never used as a clock or a phy (via reference), and
  I don't think it will be. Also none of the other ufs phy dts files has
  those props
- usb: according to schema, there should be 4 interrupts, but some have
  2 (like sm6115), and some have none. I see no such interrupts on DS. Are
  they defined elsewhere?

 arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++
 1 file changed, 904 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
new file mode 100644
index 000000000000..a1a5dc24e4db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -0,0 +1,904 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6115", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@53800000 {
+			reg = <0x0 0x53800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@56100000 {
+			reg = <0x0 0x56100000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@56110000 {
+			reg = <0x0 0x56110000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@56115000 {
+			reg = <0x0 0x56115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: memory@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		secure_display_memory: memory@f3c00000 {
+			reg = <0x0 0xf3c00000 0x0 0x5c00000>;
+			no-map;
+		};
+
+		dump_mem: memory@f9800000 {
+			reg = <0x0 0xf9800000 0x0 0x800000>;
+			no-map;
+		};
+
+		adsp_mem: memory@fa000000 {
+			reg = <0x0 0xfa000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@fa800000 {
+			reg = <0x0 0xfa800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		user_contig_mem: memory@fbc00000 {
+			reg = <0x0 0xfbc00000 0x0 0x1000000>;
+			no-map;
+		};
+
+		qseecom_ta_mem: memory@fcc00000 {
+			reg = <0x0 0xfcc00000 0x0 0x1000000>;
+			no-map;
+		};
+
+		linux_cma_mem: memory@fdc00000 {
+			reg = <0x0 0xfdc00000 0x0 0x2000000>;
+			no-map;
+		};
+
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6115";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6115-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_min_svs: opp1 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp5 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp7 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6115-tlmm";
+			reg = <0x500000 0x400000>,
+				<0x900000 0x400000>,
+				<0xd00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 121>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc1_state_on: sdc1-on-state {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd {
+					pins = "gpio88";
+					function = "gpio";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd {
+					pins = "gpio88";
+					function = "gpio";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6115";
+			reg = <0x1400000 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		hsusb_phy: phy@1613000 {
+			compatible = "qcom,sm6115-qusb2-phy";
+			reg = <0x1613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b40000 {
+			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+			reg = <0x1b40000 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x1c40000 0x1100>,
+			      <0x1e00000 0x2000000>,
+			      <0x3e00000 0x100000>,
+			      <0x3f00000 0xa0000>,
+			      <0x1c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x340000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x45f0000 0x7000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6115-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x4804000 0x3000>, <0x4810000 0x8000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			iommus = <&apps_smmu 0x100 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "core_clk_ice",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk";
+
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x4807000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@4807400 {
+				reg = <0x4807400 0x098>,
+				      <0x4807600 0x130>,
+				      <0x4807c00 0x16c>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb3: usb@4ef8800 {
+			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb3_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
+			reg = <0xc600000 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6115-apcs-hmss-global";
+			reg = <0xf111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0xf120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf121000 0x1000>,
+				      <0xf122000 0x1000>;
+			};
+
+			frame@f123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0xf200000 0x10000>,
+			      <0xf300000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08>,
+			     <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 0 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
-- 
2.37.2

[PATCH v2 8/9] arm64: dts: qcom: sm4250: Add soc dtsi

[Iskren Chernev]

The SM4250 is a downclocked version of the SM6115.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm4250.dtsi | 38 ++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
new file mode 100644
index 000000000000..8cadf813e55b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include "sm6115.dtsi"
+
+&CPU0 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU5 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU6 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU7 {
+	compatible = "qcom,kryo240";
+};
-- 
2.37.2

[PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Iskren Chernev]

Add initial support for OnePlus Nord N100, based on SM4250. Currently
working:
- boots
- usb
- buildin flash storage (UFS)
- SD card reader

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
Remaining issues from make dtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
  DTS I checked is written in this way.

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 243 ++++++++++++++++++
 2 files changed, 244 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1d86a33de528..b8c2de2932a6 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000000..ea5f626a6749
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	clocks {
+		xo-board {
+			clock-frequency = <19200000>;
+		};
+
+		sleep-clk {
+			clock-frequency = <32764>;
+		};
+	};
+
+	reserved-memory {
+		mtp_mem: memory@cc300000 {
+			reg = <0x00 0xcc300000 0x00 0xb00000>;
+			no-map;
+		};
+
+		param_mem: memory@cc200000 {
+			reg = <0x00 0xcc200000 0x00 0x100000>;
+			no-map;
+		};
+
+		bootloader_log_mem: memory@5fff7000 {
+			reg = <0x00 0x5fff7000 0x00 0x8000>;
+			no-map;
+		};
+
+		ramoops@cbe00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xcbe00000 0x0 0x400000>;
+			record-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+		};
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&hsusb_phy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&rpm_requests {
+	pm6125-regulators {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
-- 
2.37.2

Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM

[Caleb Connolly]

On 03/09/2022 18:41, Iskren Chernev wrote:
> Document the compatible for Qualcomm  SM6115 SCM.
>
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> index 9fdeee07702f..c5b76c9f7ad0 100644
> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> @@ -44,6 +44,7 @@ properties:
>             - qcom,scm-sdm845
>             - qcom,scm-sdx55
>             - qcom,scm-sdx65
> +          - qcom,scm-sm6115
>             - qcom,scm-sm6125
>             - qcom,scm-sm6350
>             - qcom,scm-sm8150
> --
> 2.37.2
>

--
Kind Regards,
Caleb

Re: [PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115

[Caleb Connolly]

On 03/09/2022 18:41, Iskren Chernev wrote:
> Document SoC compatible for sm6115.
>
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

Reviewed-by: Caleb Connolly <caleb@connolly.tech>
> ---
>   Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> index dede8892ee01..54053e16b8fd 100644
> --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> @@ -26,6 +26,7 @@ properties:
>             - qcom,sc7180-qfprom
>             - qcom,sc7280-qfprom
>             - qcom,sdm845-qfprom
> +          - qcom,sm6115-qfprom
>         - const: qcom,qfprom
>
>     reg:
> --
> 2.37.2
>

--
Kind Regards,
Caleb

Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM

[Caleb Connolly]

On 03/09/2022 19:56, Caleb Connolly wrote:
>
>
> On 03/09/2022 18:41, Iskren Chernev wrote:
>> Document the compatible for Qualcomm  SM6115 SCM.
>>
>> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
>
> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>

Nope, wrong email, please disregard and use

Reviewed-by: Caleb Connolly <caleb@connolly.tech>
>> ---
>>   Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
>> b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
>> index 9fdeee07702f..c5b76c9f7ad0 100644
>> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
>> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
>> @@ -44,6 +44,7 @@ properties:
>>             - qcom,scm-sdm845
>>             - qcom,scm-sdx55
>>             - qcom,scm-sdx65
>> +          - qcom,scm-sm6115
>>             - qcom,scm-sm6125
>>             - qcom,scm-sm6350
>>             - qcom,scm-sm8150
>> --
>> 2.37.2
>>
>

--
Kind Regards,
Caleb

Re: [PATCH v2 4/9] dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges

[Caleb Connolly]

On 03/09/2022 18:41, Iskren Chernev wrote:
> Ideally this and similar common properties will be inherited so you
> won't need to paste them in every pinctrl binding.
>
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

Reviewed-by: Caleb Connolly <caleb@connolly.tech>
> ---
>   .../devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml        | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> index a7a2bb8bff46..d8443811767d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> @@ -49,6 +49,8 @@ properties:
>     gpio-ranges:
>       maxItems: 1
>
> +  gpio-reserved-ranges: true
> +
>     wakeup-parent: true
>
>   #PIN CONFIGURATION NODES
> --
> 2.37.2
>

--
Kind Regards,
Caleb

Re: [PATCH v2 6/9] dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone

[Caleb Connolly]

On 03/09/2022 18:41, Iskren Chernev wrote:
> oneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon
> SM4250 SoC.
>
> Add support for the same in dt-bindings.
>
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Caleb Connolly <caleb@connolly.tech>
> ---
>   Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 19c2f4314741..63cc41cd0119 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -54,6 +54,8 @@ description: |
>           sdm845
>           sdx55
>           sdx65
> +        sm4250
> +        sm6115
>           sm6125
>           sm6350
>           sm7225
> @@ -670,6 +672,11 @@ properties:
>                 - xiaomi,polaris
>             - const: qcom,sdm845
>
> +      - items:
> +          - enum:
> +              - oneplus,billie2
> +          - const: qcom,sm4250
> +
>         - items:
>             - enum:
>                 - sony,pdx201
> --
> 2.37.2
>

--
Kind Regards,
Caleb

Re: [PATCH v2 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi

[Konrad Dybcio]

On 3.09.2022 19:41, Iskren Chernev wrote:
> Add support for Qualcomm SM6115 SoC. This includes:
> - GCC
> - Pinctrl
> - RPM (CC+PD)
> - USB
> - MMC
> - UFS
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
> Remaining issues from make dtbs_check:
> - qcom,glink-rpm -- this is still in a txt file
> - rpm-requests: qcom,glink-channels -- according to txt file, it is allowed
>   property
> - pinctrl -- the existing bindings should support both simple (single pin)
>   and multi-block pinctr blocks (this commit contains multi-block only).
>   However it doesn't work. This block needs to be revisited:
> 
>     #PIN CONFIGURATION NODES
>     patternProperties:
>       '-state$':
>         oneOf:
>           - $ref: "#/$defs/qcom-sm6115-tlmm-state"
>           - patternProperties:
>               ".*":
>                 $ref: "#/$defs/qcom-sm6115-tlmm-state"
> 
> - ufs phy: binding complains about missing #clock and #phy -cells. The
>   outer binding is never used as a clock or a phy (via reference), and
>   I don't think it will be. Also none of the other ufs phy dts files has
>   those props
> - usb: according to schema, there should be 4 interrupts, but some have
>   2 (like sm6115), and some have none. I see no such interrupts on DS. Are
>   they defined elsewhere?
> 
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++
>  1 file changed, 904 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> new file mode 100644
> index 000000000000..a1a5dc24e4db
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -0,0 +1,904 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-sm6115.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-output-names = "xo_board";
Not sure if it's necessary given you pass these to clock controllers explicitly anyway.
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-output-names = "sleep_clk";
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x1>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x2>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x3>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU4: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			next-level-cache = <&L2_1>;
> +			L2_1: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU5: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x101>;
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU6: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x102>;
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU7: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x103>;
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&CPU4>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU5>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU6>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU7>;
> +				};
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		scm: scm {
> +			compatible = "qcom,scm-sm6115", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0 0x80000000 0 0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@45700000 {
> +			reg = <0x0 0x45700000 0x0 0x600000>;
> +			no-map;
> +		};
> +
> +		xbl_aop_mem: memory@45e00000 {
> +			reg = <0x0 0x45e00000 0x0 0x140000>;
> +			no-map;
> +		};
> +
> +		sec_apps_mem: memory@45fff000 {
> +			reg = <0x0 0x45fff000 0x0 0x1000>;
> +			no-map;
> +		};
> +
> +		smem_mem: memory@46000000 {
> +			reg = <0x0 0x46000000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		cdsp_sec_mem: memory@46200000 {
> +			reg = <0x0 0x46200000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		pil_modem_mem: memory@4ab00000 {
> +			reg = <0x0 0x4ab00000 0x0 0x6900000>;
> +			no-map;
> +		};
> +
> +		pil_video_mem: memory@51400000 {
> +			reg = <0x0 0x51400000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		wlan_msa_mem: memory@51900000 {
> +			reg = <0x0 0x51900000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		pil_cdsp_mem: memory@51a00000 {
> +			reg = <0x0 0x51a00000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		pil_adsp_mem: memory@53800000 {
> +			reg = <0x0 0x53800000 0x0 0x2800000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_fw_mem: memory@56100000 {
> +			reg = <0x0 0x56100000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_gsi_mem: memory@56110000 {
> +			reg = <0x0 0x56110000 0x0 0x5000>;
> +			no-map;
> +		};
> +
> +		pil_gpu_mem: memory@56115000 {
> +			reg = <0x0 0x56115000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		cont_splash_memory: memory@5c000000 {
> +			reg = <0x0 0x5c000000 0x0 0x00f00000>;
> +			no-map;
> +		};
> +
> +		dfps_data_memory: memory@5cf00000 {
> +			reg = <0x0 0x5cf00000 0x0 0x0100000>;
> +			no-map;
> +		};
> +
> +		removed_mem: memory@60000000 {
> +			reg = <0x0 0x60000000 0x0 0x3900000>;
> +			no-map;
> +		};
> +
> +		secure_display_memory: memory@f3c00000 {
> +			reg = <0x0 0xf3c00000 0x0 0x5c00000>;
> +			no-map;
> +		};
> +
> +		dump_mem: memory@f9800000 {
> +			reg = <0x0 0xf9800000 0x0 0x800000>;
> +			no-map;
> +		};
> +
> +		adsp_mem: memory@fa000000 {
> +			reg = <0x0 0xfa000000 0x0 0x800000>;
> +			no-map;
> +		};
> +
> +		qseecom_mem: memory@fa800000 {
> +			reg = <0x0 0xfa800000 0x0 0x1400000>;
> +			no-map;
> +		};
> +
> +		user_contig_mem: memory@fbc00000 {
> +			reg = <0x0 0xfbc00000 0x0 0x1000000>;
Pretty sure this and linux_cma_mem don't need to be reserved at a precise
location.. I might be wrong, though..

> +			no-map;
> +		};
> +
> +		qseecom_ta_mem: memory@fcc00000 {
> +			reg = <0x0 0xfcc00000 0x0 0x1000000>;
> +			no-map;
> +		};
> +
> +		linux_cma_mem: memory@fdc00000 {
> +			reg = <0x0 0xfdc00000 0x0 0x2000000>;
> +			no-map;
> +		};
> +
> +	};
> +
> +	rpm-glink {
> +		compatible = "qcom,glink-rpm";
> +
> +		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		mboxes = <&apcs_glb 0>;
> +
> +		rpm_requests: rpm-requests {
> +			compatible = "qcom,rpm-sm6115";
> +			qcom,glink-channels = "rpm_requests";
> +
> +			rpmcc: clock-controller {
> +				compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
> +				#clock-cells = <1>;
> +			};
> +
> +			rpmpd: power-controller {
> +				compatible = "qcom,sm6115-rpmpd";
> +				#power-domain-cells = <1>;
> +				operating-points-v2 = <&rpmpd_opp_table>;
> +
> +				rpmpd_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					rpmpd_opp_min_svs: opp1 {
> +						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> +					};
> +
> +					rpmpd_opp_low_svs: opp2 {
> +						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> +					};
> +
> +					rpmpd_opp_svs: opp3 {
> +						opp-level = <RPM_SMD_LEVEL_SVS>;
> +					};
> +
> +					rpmpd_opp_svs_plus: opp4 {
> +						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> +					};
> +
> +					rpmpd_opp_nom: opp5 {
> +						opp-level = <RPM_SMD_LEVEL_NOM>;
> +					};
> +
> +					rpmpd_opp_nom_plus: opp6 {
> +						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> +					};
> +
> +					rpmpd_opp_turbo: opp7 {
> +						opp-level = <RPM_SMD_LEVEL_TURBO>;
> +					};
> +
> +					rpmpd_opp_turbo_plus: opp8 {
> +						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
> +	smem {
> +		compatible = "qcom,smem";
> +		memory-region = <&smem_mem>;
> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		hwlocks = <&tcsr_mutex 3>;
> +	};
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0xffffffff>;
> +
> +		tlmm: pinctrl@500000 {
> +			compatible = "qcom,sm6115-tlmm";
> +			reg = <0x500000 0x400000>,
> +				<0x900000 0x400000>,
Bad indentation.

> +				<0xd00000 0x400000>;
> +			reg-names = "west", "south", "east";
> +			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			gpio-ranges = <&tlmm 0 0 121>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			sdc1_state_on: sdc1-on-state {
> +				clk {
> +					pins = "sdc1_clk";
> +					bias-disable;
> +					drive-strength = <16>;
> +				};
> +
> +				cmd {
> +					pins = "sdc1_cmd";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				data {
> +					pins = "sdc1_data";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				rclk {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc1_state_off: sdc1-off-state {
> +				clk {
> +					pins = "sdc1_clk";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +
> +				cmd {
> +					pins = "sdc1_cmd";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				data {
> +					pins = "sdc1_data";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				rclk {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc2_state_on: sdc2-on-state {
> +				clk {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <16>;
> +				};
> +
> +				cmd {
> +					pins = "sdc2_cmd";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				data {
> +					pins = "sdc2_data";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				sd-cd {
> +					pins = "gpio88";
> +					function = "gpio";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +			};
> +
> +			sdc2_state_off: sdc2-off-state {
> +				clk {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +
> +				cmd {
> +					pins = "sdc2_cmd";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				data {
> +					pins = "sdc2_data";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				sd-cd {
> +					pins = "gpio88";
> +					function = "gpio";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +			};
> +		};
> +
> +		gcc: clock-controller@1400000 {
> +			compatible = "qcom,gcc-sm6115";
> +			reg = <0x1400000 0x1f0000>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		hsusb_phy: phy@1613000 {
> +			compatible = "qcom,sm6115-qusb2-phy";
> +			reg = <0x1613000 0x180>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "cfg_ahb", "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +			nvmem-cells = <&qusb2_hstx_trim>;
> +
> +			status = "disabled";
> +		};
> +
> +		qfprom@1b40000 {
> +			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
> +			reg = <0x1b40000 0x7000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			qusb2_hstx_trim: hstx-trim@25b {
> +				reg = <0x25b 0x1>;
> +				bits = <1 4>;
> +			};
> +		};
> +
> +		spmi_bus: spmi@1c40000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x1c40000 0x1100>,
> +			      <0x1e00000 0x2000000>,
> +			      <0x3e00000 0x100000>,
> +			      <0x3f00000 0xa0000>,
> +			      <0x1c0a000 0x26000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x340000 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		rpm_msg_ram: sram@45f0000 {
> +			compatible = "qcom,rpm-msg-ram";
> +			reg = <0x45f0000 0x7000>;
> +		};
> +
> +		sdhc_1: mmc@4744000 {
> +			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>;
> +			reg-names = "hc", "cqhci", "ice";
> +
> +			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
Bad indentation.

> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +				 <&gcc GCC_SDCC1_APPS_CLK>,
> +				 <&xo_board>,
> +				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> +			clock-names = "iface", "core", "xo", "ice";
> +
> +			pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>;
> +			pinctrl-names = "default", "sleep";
> +
> +			bus-width = <8>;
> +			status = "disabled";
> +		};
> +
> +		sdhc_2: mmc@4784000 {
> +			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x04784000 0x1000>;
> +			reg-names = "hc";
> +
> +			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
Bad indentation.

> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&xo_board>;
> +			clock-names = "iface", "core", "xo";
> +
> +			pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>;
> +			pinctrl-names = "default", "sleep";
> +
> +			power-domains = <&rpmpd SM6115_VDDCX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +			iommus = <&apps_smmu 0x00a0 0x0>;
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +
> +			bus-width = <4>;
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			status = "disabled";
> +
> +			sdhc2_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmpd_opp_low_svs>;
> +				};
> +
> +				opp-202000000 {
> +					opp-hz = /bits/ 64 <202000000>;
> +					required-opps = <&rpmpd_opp_nom>;
> +				};
> +			};
> +		};
> +
> +		ufs_mem_hc: ufs@4804000 {
> +			compatible = "qcom,sm6115-ufshc", "qcom,ufshc",
> +				     "jedec,ufs-2.0";
Wouldn't this fit in a single, 100char line?

> +			reg = <0x4804000 0x3000>, <0x4810000 0x8000>;
> +			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_mem_phy_lanes>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <1>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> +			iommus = <&apps_smmu 0x100 0>;
> +
> +			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_UFS_PHY_AHB_CLK>,
> +				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
> +			clock-names = "core_clk",
> +				      "bus_aggr_clk",
> +				      "iface_clk",
> +				      "core_clk_unipro",
> +				      "core_clk_ice",
> +				      "ref_clk",
> +				      "tx_lane0_sync_clk",
> +				      "rx_lane0_sync_clk";
> +
> +			freq-table-hz = <50000000 200000000>,
> +					<0 0>,
> +					<0 0>,
> +					<37500000 150000000>,
> +					<75000000 300000000>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>;
> +
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_phy: phy@4807000 {
> +			compatible = "qcom,sm6115-qmp-ufs-phy";
> +			reg = <0x4807000 0x1c4>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			clocks = <&gcc GCC_UFS_CLKREF_CLK>,
> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +			clock-names = "ref", "ref_aux";
> +
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";
> +			status = "disabled";
> +
> +			ufs_mem_phy_lanes: phy@4807400 {
> +				reg = <0x4807400 0x098>,
> +				      <0x4807600 0x130>,
> +				      <0x4807c00 0x16c>;
> +				#phy-cells = <0>;
> +			};
> +		};
> +
> +		usb3: usb@4ef8800 {
> +			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
> +			reg = <0x04ef8800 0x400>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
> +			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
> +				      "sleep", "xo";
> +
> +			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +			assigned-clock-rates = <19200000>, <66666667>;
> +
> +			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hs_phy_irq", "ss_phy_irq";
> +
> +			resets = <&gcc GCC_USB30_PRIM_BCR>;
> +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +			qcom,select-utmi-as-pipe-clk;
> +			status = "disabled";
> +
> +			usb3_dwc3: usb@4e00000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x04e00000 0xcd00>;
> +				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&hsusb_phy>;
> +				phy-names = "usb2-phy";
> +				iommus = <&apps_smmu 0x120 0x0>;
> +				snps,dis_u2_susphy_quirk;
> +				snps,dis_enblslpm_quirk;
> +				snps,has-lpm-erratum;
> +				snps,hird-threshold = /bits/ 8 <0x10>;
> +				snps,usb3_lpm_capable;
> +				maximum-speed = "high-speed";
> +				dr_mode = "peripheral";
> +			};
> +		};
> +
> +		apps_smmu: iommu@c600000 {
> +			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
> +			reg = <0xc600000 0x80000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <1>;
> +
> +			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		apcs_glb: mailbox@f111000 {
> +			compatible = "qcom,sm6115-apcs-hmss-global";
> +			reg = <0xf111000 0x1000>;
> +
> +			#mbox-cells = <1>;
> +		};
> +
> +		timer@f120000 {
> +			compatible = "arm,armv7-timer-mem";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			reg = <0xf120000 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@f121000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf121000 0x1000>,
> +				      <0xf122000 0x1000>;
> +			};
> +
> +			frame@f123000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf123000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@f124000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf124000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@f125000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf125000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@f126000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf126000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@f127000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf127000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@f128000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xf128000 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		intc: interrupt-controller@f200000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			interrupt-parent = <&intc>;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			reg = <0xf200000 0x10000>,
> +			      <0xf300000 0x100000>;
Compatible first, reg second.


> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 1 0xf08>,
> +			     <GIC_PPI 2 0xf08>,
> +			     <GIC_PPI 3 0xf08>,
> +			     <GIC_PPI 0 0xf08>;
> +		clock-frequency = <19200000>;
Remove clock-frequency if the platform boots without it.

Konrad
> +	};
> +};

Re: [PATCH v2 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi

[Iskren Chernev]

On 9/3/22 22:46, Konrad Dybcio wrote:
>> +		user_contig_mem: memory@fbc00000 {
>> +			reg = <0x0 0xfbc00000 0x0 0x1000000>;
> Pretty sure this and linux_cma_mem don't need to be reserved at a precise
> location.. I might be wrong, though..

In downstream pretty much no reserved memory location have precise location.
How do you figure out which one is which?

>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 1 0xf08>,
>> +			     <GIC_PPI 2 0xf08>,
>> +			     <GIC_PPI 3 0xf08>,
>> +			     <GIC_PPI 0 0xf08>;
>> +		clock-frequency = <19200000>;
> Remove clock-frequency if the platform boots without it.

And if not stick it in DTS?

Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM

[Krzysztof Kozlowski]

On 03/09/2022 20:41, Iskren Chernev wrote:
> Document the compatible for Qualcomm  SM6115 SCM.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

There was such patch:
https://lore.kernel.org/all/338f2929-aa67-bf63-2d66-5de48f6af1c4@linaro.org/

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115

[Krzysztof Kozlowski]

On 03/09/2022 20:41, Iskren Chernev wrote:
> Document SoC compatible for sm6115.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM

[Iskren Chernev]

On 9/4/22 22:14, Krzysztof Kozlowski wrote:
> On 03/09/2022 20:41, Iskren Chernev wrote:
>> Document the compatible for Qualcomm  SM6115 SCM.
>>
>> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
>
> There was such patch:
> https://lore.kernel.org/all/338f2929-aa67-bf63-2d66-5de48f6af1c4@linaro.org/

Yep, but that patch is for .txt schema, and now the schema is .yaml. So if you
applied the other patchset and then ran dtbs_check it would still complain, so
I added a patch here, in case the other patchset is not updated. I hope such
a simple commit won't cause trouble (if you merge one and then try to merge the
other).

> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>
> Best regards,
> Krzysztof

Re: [PATCH v2 1/9] dt-bindings: ufs: qcom: Add sm6115 binding

[Krzysztof Kozlowski]

On 03/09/2022 19:41, Iskren Chernev wrote:
> Add SM6115 UFS to DT schema.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
>  .../devicetree/bindings/ufs/qcom,ufs.yaml     | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
> index f2d6298d926c..be55a5dfc68f 100644
> --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
> +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
> @@ -28,6 +28,7 @@ properties:
>            - qcom,msm8998-ufshc
>            - qcom,sc8280xp-ufshc
>            - qcom,sdm845-ufshc
> +          - qcom,sm6115-ufshc
>            - qcom,sm6350-ufshc
>            - qcom,sm8150-ufshc
>            - qcom,sm8250-ufshc
> @@ -178,6 +179,31 @@ allOf:
>            minItems: 1
>            maxItems: 1
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sm6115-ufshc
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 8
> +          maxItems: 8
> +        clock-names:
> +          items:
> +            - const: core_clk
> +            - const: bus_aggr_clk
> +            - const: iface_clk
> +            - const: core_clk_unipro
> +            - const: core_clk_ice

This still is not naming and order of sdm845.

> +            - const: ref_clk
> +            - const: tx_lane0_sync_clk
> +            - const: rx_lane0_sync_clk

Best regards,
Krzysztof

Re: [PATCH v2 8/9] arm64: dts: qcom: sm4250: Add soc dtsi

[Krzysztof Kozlowski]

On 03/09/2022 19:41, Iskren Chernev wrote:
> The SM4250 is a downclocked version of the SM6115.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/sm4250.dtsi | 38 ++++++++++++++++++++++++++++


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Krzysztof Kozlowski]

On 03/09/2022 19:41, Iskren Chernev wrote:
> Add initial support for OnePlus Nord N100, based on SM4250. Currently
> working:
> - boots
> - usb
> - buildin flash storage (UFS)
> - SD card reader
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
> Remaining issues from make dtbs_check:
> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>   DTS I checked is written in this way.

Yes, I sent patches for it, already merged, so please rebase on linux-next.

https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/

> 
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 243 ++++++++++++++++++
>  2 files changed, 244 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1d86a33de528..b8c2de2932a6 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> new file mode 100644
> index 000000000000..ea5f626a6749
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm4250.dtsi"
> +
> +/ {
> +	model = "OnePlus Nord N100";
> +	compatible = "oneplus,billie2", "qcom,sm4250";
> +
> +	/* required for bootloader to select correct board */
> +	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
> +	qcom,board-id = <0x1000b 0x00>;
> +
> +	aliases {
> +	};
> +
> +	chosen {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		stdout-path = "framebuffer0";
> +
> +		framebuffer0: framebuffer@9d400000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
> +			width = <720>;
> +			height = <1600>;
> +			stride = <(720 * 4)>;
> +			format = "a8r8g8b8";
> +		};
> +	};
> +
> +	clocks {
> +		xo-board {

These should be overridden by label, not full node path.

> +			clock-frequency = <19200000>;
> +		};
> +
> +		sleep-clk {
> +			clock-frequency = <32764>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		mtp_mem: memory@cc300000 {
> +			reg = <0x00 0xcc300000 0x00 0xb00000>;
> +			no-map;
> +		};
> +
> +		param_mem: memory@cc200000 {
> +			reg = <0x00 0xcc200000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		bootloader_log_mem: memory@5fff7000 {
> +			reg = <0x00 0x5fff7000 0x00 0x8000>;
> +			no-map;
> +		};
> +
> +		ramoops@cbe00000 {
> +			compatible = "ramoops";
> +			reg = <0x0 0xcbe00000 0x0 0x400000>;
> +			record-size = <0x40000>;
> +			pmsg-size = <0x200000>;
> +			console-size = <0x40000>;
> +			ftrace-size = <0x40000>;
> +		};
> +	};
> +};
> +
> +&usb3 {
> +	status = "okay";
> +};
> +
> +&hsusb_phy {
> +	vdd-supply = <&vreg_l4a>;
> +	vdda-pll-supply = <&vreg_l12a>;
> +	vdda-phy-dpdm-supply = <&vreg_l15a>;
> +	status = "okay";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <14 4>;
> +};
> +
> +&sdhc_2 {
> +	vmmc-supply = <&vreg_l22a>;
> +	vqmmc-supply = <&vreg_l5a>;
> +
> +	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> +
> +	status = "okay";
> +};
> +
> +&ufs_mem_hc {
> +	vcc-supply = <&vreg_l24a>;
> +	vcc-max-microamp = <600000>;
> +	vccq2-supply = <&vreg_l11a>;
> +	vccq2-max-microamp = <600000>;
> +	status = "okay";
> +};
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l4a>;
> +	vdda-pll-supply = <&vreg_l12a>;
> +	vddp-ref-clk-supply = <&vreg_l18a>;
> +	status = "okay";
> +};
> +
> +&rpm_requests {
> +	pm6125-regulators {

Please rebase and test with
Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml



Best regards,
Krzysztof

Re: [PATCH v2 1/9] dt-bindings: ufs: qcom: Add sm6115 binding

[Iskren Chernev]

On 9/6/22 11:29, Krzysztof Kozlowski wrote:
> On 03/09/2022 19:41, Iskren Chernev wrote:
>> Add SM6115 UFS to DT schema.
>>
>> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
>> ---
>>  .../devicetree/bindings/ufs/qcom,ufs.yaml     | 26 +++++++++++++++++++
>>  1 file changed, 26 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
>> index f2d6298d926c..be55a5dfc68f 100644
>> --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
>> +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
>> @@ -28,6 +28,7 @@ properties:
>>            - qcom,msm8998-ufshc
>>            - qcom,sc8280xp-ufshc
>>            - qcom,sdm845-ufshc
>> +          - qcom,sm6115-ufshc
>>            - qcom,sm6350-ufshc
>>            - qcom,sm8150-ufshc
>>            - qcom,sm8250-ufshc
>> @@ -178,6 +179,31 @@ allOf:
>>            minItems: 1
>>            maxItems: 1
>>  
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - qcom,sm6115-ufshc
>> +    then:
>> +      properties:
>> +        clocks:
>> +          minItems: 8
>> +          maxItems: 8
>> +        clock-names:
>> +          items:
>> +            - const: core_clk
>> +            - const: bus_aggr_clk
>> +            - const: iface_clk
>> +            - const: core_clk_unipro
>> +            - const: core_clk_ice
> 
> This still is not naming and order of sdm845.

Yes, this will come in v3. v2 was released before we finished discussing this issue.

>> +            - const: ref_clk
>> +            - const: tx_lane0_sync_clk
>> +            - const: rx_lane0_sync_clk
> 
> Best regards,
> Krzysztof

Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Iskren Chernev]

On 9/6/22 11:33, Krzysztof Kozlowski wrote:
> On 03/09/2022 19:41, Iskren Chernev wrote:
>> Add initial support for OnePlus Nord N100, based on SM4250. Currently
>> working:
>> - boots
>> - usb
>> - buildin flash storage (UFS)
>> - SD card reader
>>
>> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
>> ---
>> Remaining issues from make dtbs_check:
>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>>   DTS I checked is written in this way.
>
> Yes, I sent patches for it, already merged, so please rebase on linux-next.
>
> https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/

Great, thanks!

>> +
>> +	clocks {
>> +		xo-board {
>
> These should be overridden by label, not full node path.

Will do.

>> +&rpm_requests {
>> +	pm6125-regulators {
>
> Please rebase and test with
> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml

I will, I'm just waiting for Konrad to say what to do about the reserved-memory
nodes. For some reason mainline doesn't use alloc-ranges (dynamic) regions. On
the other hand all of the dynamic ranges are not used ATM, so I can just drop
them?

> Best regards,
> Krzysztof

Re: [PATCH v2 4/9] dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges

[Linus Walleij]

On Sat, Sep 3, 2022 at 7:42 PM Iskren Chernev <iskren.chernev@gmail.com> wrote:

> Ideally this and similar common properties will be inherited so you
> won't need to paste them in every pinctrl binding.
>
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

This patch 4/9 applied to the pinctrl tree.

Yours,
Linus Walleij

Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Iskren Chernev]

On 9/6/22 11:33, Krzysztof Kozlowski wrote:
> On 03/09/2022 19:41, Iskren Chernev wrote:
>> Remaining issues from make dtbs_check:
>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>>   DTS I checked is written in this way.
>
> Yes, I sent patches for it, already merged, so please rebase on linux-next.
>
> https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/
>
> Please rebase and test with
> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml

It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e
indirect) regulators are used, so this doesn't fix it for me.

Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM

[Guru Das Srinagesh]

On Sep 03 2022 20:41, Iskren Chernev wrote:
> Document the compatible for Qualcomm  SM6115 SCM.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>

> ---
>  Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> index 9fdeee07702f..c5b76c9f7ad0 100644
> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> @@ -44,6 +44,7 @@ properties:
>            - qcom,scm-sdm845
>            - qcom,scm-sdx55
>            - qcom,scm-sdx65
> +          - qcom,scm-sm6115
>            - qcom,scm-sm6125
>            - qcom,scm-sm6350
>            - qcom,scm-sm8150
> -- 
> 2.37.2
> 

Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Krzysztof Kozlowski]

On 08/09/2022 19:52, Iskren Chernev wrote:
> 
> 
> On 9/6/22 11:33, Krzysztof Kozlowski wrote:
>> On 03/09/2022 19:41, Iskren Chernev wrote:
>>> Remaining issues from make dtbs_check:
>>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>>>   DTS I checked is written in this way.
>>
>> Yes, I sent patches for it, already merged, so please rebase on linux-next.
>>
>> https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/
>>
>> Please rebase and test with
>> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> 
> It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e
> indirect) regulators are used, so this doesn't fix it for me.

Indeed, but I got good news! The SMD/RPM was fixed here:
https://lore.kernel.org/all/20220901093243.134288-1-krzysztof.kozlowski@linaro.org/

Although anyway you Cc old addresses here, so you need to rebase on next
and use get_maintainers.pl.

Bjorn,
Can we get the schemas merged?

Best regards,
Krzysztof

Re: [PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115

[Srinivas Kandagatla]

On 03/09/2022 18:41, Iskren Chernev wrote:
> Document SoC compatible for sm6115.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---

Applied thanks,

--srini
>   Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> index dede8892ee01..54053e16b8fd 100644
> --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> @@ -26,6 +26,7 @@ properties:
>             - qcom,sc7180-qfprom
>             - qcom,sc7280-qfprom
>             - qcom,sdm845-qfprom
> +          - qcom,sm6115-qfprom
>         - const: qcom,qfprom
>   
>     reg: