* [PATCH] scsi: qla2xxx: initialize value
@ 2020-10-05 14:45 trix
2020-10-07 13:32 ` Himanshu Madhani
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: trix @ 2020-10-05 14:45 UTC (permalink / raw)
To: njavali, jejb, martin.petersen, natechancellor, ndesaulniers
Cc: GR-QLogic-Storage-Upstream, linux-scsi, linux-kernel,
clang-built-linux, Tom Rix
From: Tom Rix <trix@redhat.com>
clang static analysis reports this problem:
qla_nx2.c:694:3: warning: 6th function call argument is
an uninitialized value
ql_log(ql_log_fatal, vha, 0xb090,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In qla8044_poll_reg(), when reading the reg fails, the
error is reported by reusing the timeout error reporter.
Because the value is unset, a garbage value will be
reported. So initialize the value.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/scsi/qla2xxx/qla_nx2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 3a415b12dcec..01ccd4526707 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -659,7 +659,7 @@ static int
qla8044_poll_reg(struct scsi_qla_host *vha, uint32_t addr,
int duration, uint32_t test_mask, uint32_t test_result)
{
- uint32_t value;
+ uint32_t value = 0;
int timeout_error;
uint8_t retries;
int ret_val = QLA_SUCCESS;
--
2.18.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] scsi: qla2xxx: initialize value
2020-10-05 14:45 [PATCH] scsi: qla2xxx: initialize value trix
@ 2020-10-07 13:32 ` Himanshu Madhani
2020-10-08 2:21 ` Martin K. Petersen
2020-10-13 22:43 ` Martin K. Petersen
2 siblings, 0 replies; 4+ messages in thread
From: Himanshu Madhani @ 2020-10-07 13:32 UTC (permalink / raw)
To: trix
Cc: Nilesh Javali, James E.J. Bottomley, Martin K . Petersen,
natechancellor, ndesaulniers, GR-QLogic-Storage-Upstream,
linux-scsi, linux-kernel, clang-built-linux
> On Oct 5, 2020, at 9:45 AM, trix@redhat.com wrote:
>
> From: Tom Rix <trix@redhat.com>
>
> clang static analysis reports this problem:
>
> qla_nx2.c:694:3: warning: 6th function call argument is
> an uninitialized value
> ql_log(ql_log_fatal, vha, 0xb090,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> In qla8044_poll_reg(), when reading the reg fails, the
> error is reported by reusing the timeout error reporter.
> Because the value is unset, a garbage value will be
> reported. So initialize the value.
>
> Signed-off-by: Tom Rix <trix@redhat.com>
> ---
> drivers/scsi/qla2xxx/qla_nx2.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
> index 3a415b12dcec..01ccd4526707 100644
> --- a/drivers/scsi/qla2xxx/qla_nx2.c
> +++ b/drivers/scsi/qla2xxx/qla_nx2.c
> @@ -659,7 +659,7 @@ static int
> qla8044_poll_reg(struct scsi_qla_host *vha, uint32_t addr,
> int duration, uint32_t test_mask, uint32_t test_result)
> {
> - uint32_t value;
> + uint32_t value = 0;
> int timeout_error;
> uint8_t retries;
> int ret_val = QLA_SUCCESS;
> --
> 2.18.1
>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
--
Himanshu Madhani Oracle Linux Engineering
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] scsi: qla2xxx: initialize value
2020-10-05 14:45 [PATCH] scsi: qla2xxx: initialize value trix
2020-10-07 13:32 ` Himanshu Madhani
@ 2020-10-08 2:21 ` Martin K. Petersen
2020-10-13 22:43 ` Martin K. Petersen
2 siblings, 0 replies; 4+ messages in thread
From: Martin K. Petersen @ 2020-10-08 2:21 UTC (permalink / raw)
To: trix
Cc: njavali, jejb, martin.petersen, natechancellor, ndesaulniers,
GR-QLogic-Storage-Upstream, linux-scsi, linux-kernel,
clang-built-linux
Tom,
> clang static analysis reports this problem:
>
> qla_nx2.c:694:3: warning: 6th function call argument is
> an uninitialized value
> ql_log(ql_log_fatal, vha, 0xb090,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Applied to 5.10/scsi-staging, thanks!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] scsi: qla2xxx: initialize value
2020-10-05 14:45 [PATCH] scsi: qla2xxx: initialize value trix
2020-10-07 13:32 ` Himanshu Madhani
2020-10-08 2:21 ` Martin K. Petersen
@ 2020-10-13 22:43 ` Martin K. Petersen
2 siblings, 0 replies; 4+ messages in thread
From: Martin K. Petersen @ 2020-10-13 22:43 UTC (permalink / raw)
To: njavali, trix, natechancellor, jejb, ndesaulniers
Cc: Martin K . Petersen, clang-built-linux, linux-kernel,
GR-QLogic-Storage-Upstream, linux-scsi
On Mon, 5 Oct 2020 07:45:44 -0700, trix@redhat.com wrote:
> clang static analysis reports this problem:
>
> qla_nx2.c:694:3: warning: 6th function call argument is
> an uninitialized value
> ql_log(ql_log_fatal, vha, 0xb090,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> [...]
Applied to 5.10/scsi-queue, thanks!
[1/1] scsi: qla2xxx: Initialize variable in qla8044_poll_reg()
https://git.kernel.org/mkp/scsi/c/21a6cd48bb48
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-10-13 22:45 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-05 14:45 [PATCH] scsi: qla2xxx: initialize value trix
2020-10-07 13:32 ` Himanshu Madhani
2020-10-08 2:21 ` Martin K. Petersen
2020-10-13 22:43 ` Martin K. Petersen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).