From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
laurent.pinchart@ideasonboard.com, geert@linux-m68k.org,
horms@verge.net.au, uli+renesas@fpond.eu,
VenkataRajesh.Kalakodima@in.bosch.com
Cc: airlied@linux.ie, daniel@ffwll.ch, koji.matsuoka.xm@renesas.com,
muroya@ksk.co.jp, Harsha.ManjulaMallikarjun@in.bosch.com,
ezequiel@collabora.com, seanpaul@chromium.org,
linux-renesas-soc@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 3/8] drm: rcar-du: Add support for CMM
Date: Tue, 15 Oct 2019 12:53:55 +0100 [thread overview]
Message-ID: <2aefe646-45db-aafa-b22b-e1cf9616259d@ideasonboard.com> (raw)
In-Reply-To: <20191015104621.62514-4-jacopo+renesas@jmondi.org>
Hi Jacopo,
On 15/10/2019 11:46, Jacopo Mondi wrote:
> Add a driver for the R-Car Display Unit Color Correction Module.
>
> In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
> to perform image enhancement and color correction.
>
> Add support for CMM through a driver that supports configuration of
> the 1-dimensional LUT table. More advanced CMM features will be
> implemented on top of this initial one.
>
This is looking good to me.
I have patches which start to add CLU on top of this, which refactor
things slightly - but I don't think that refactoring needs to be in this
series, and this version is independent and looks good ... thus:
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/gpu/drm/rcar-du/Kconfig | 7 +
> drivers/gpu/drm/rcar-du/Makefile | 1 +
> drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++
> drivers/gpu/drm/rcar-du/rcar_cmm.h | 60 +++++++++
> 4 files changed, 266 insertions(+)
> create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c
> create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h
>
> diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> index 1529849e217e..539d232790d1 100644
> --- a/drivers/gpu/drm/rcar-du/Kconfig
> +++ b/drivers/gpu/drm/rcar-du/Kconfig
> @@ -13,6 +13,13 @@ config DRM_RCAR_DU
> Choose this option if you have an R-Car chipset.
> If M is selected the module will be called rcar-du-drm.
>
> +config DRM_RCAR_CMM
> + bool "R-Car DU Color Management Module (CMM) Support"
> + depends on DRM && OF
> + depends on DRM_RCAR_DU
DRM_RCAR_DU already depends on both DRM && OF, so I wonder if those are
needed to be specified explicitly.
Doesn't hurt of course, but I see DRM_RCAR_DW_HDMI does the same, and so
does DRM_RCAR_LVDS, so I don't think you need to remove it.
> + help
> + Enable support for R-Car Color Management Module (CMM).
> +
> config DRM_RCAR_DW_HDMI
> tristate "R-Car DU Gen3 HDMI Encoder Support"
> depends on DRM && OF
> diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
> index 6c2ed9c46467..4d1187ccc3e5 100644
> --- a/drivers/gpu/drm/rcar-du/Makefile
> +++ b/drivers/gpu/drm/rcar-du/Makefile
> @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \
> rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o
> rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
>
> +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o
> obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o
> obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o
> obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o
> diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> new file mode 100644
> index 000000000000..9675a8587dee
> --- /dev/null
> +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> @@ -0,0 +1,198 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * rcar_cmm.c -- R-Car Display Unit Color Management Module
> + *
> + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <drm/drm_color_mgmt.h>
> +
> +#include "rcar_cmm.h"
> +
> +#define CM2_LUT_CTRL 0x0000
> +#define CM2_LUT_CTRL_LUT_EN BIT(0)
> +#define CM2_LUT_TBL_BASE 0x0600
> +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4)
> +
> +struct rcar_cmm {
> + void __iomem *base;
> +
> + /*
> + * @lut: 1D-LUT status
> + * @lut.enabled: 1D-LUT enabled flag
> + */
> + struct {
> + bool enabled;
> + } lut;
This used to be a more complex structure in an earlier version storing a
cached version of the table. Now that the cached entry is removed, does
this need to be such a complex structure rather than just say, a bool
lut_enabled?
(We will soon add an equivalent clu_enabled too, but I don't know what
other per-table options we'll need.)
In fact, we'll potentially have other options specific to the HGO, and
CSC at some point in the future - so grouping by entity is indeed a good
thing IMO.
> +};
> +
> +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg)
> +{
> + return ioread32(rcmm->base + reg);
> +}
> +
> +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data)
> +{
> + iowrite32(data, rcmm->base + reg);
> +}
> +
> +/*
> + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision
> + * and write to the CMM registers.
> + * @rcmm: Pointer to the CMM device
> + * @drm_lut: Pointer to the DRM LUT table
> + */
> +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm,
> + const struct drm_color_lut *drm_lut)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < CM2_LUT_SIZE; ++i) {
> + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16
> + | drm_color_lut_extract(drm_lut[i].green, 8) << 8
> + | drm_color_lut_extract(drm_lut[i].blue, 8);
> +
> + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry);
> + }
> +}
> +
> +/*
> + * rcar_cmm_setup() - Configure the CMM unit.
> + * @pdev: The platform device associated with the CMM instance
> + * @config: The CMM unit configuration
> + *
> + * Configure the CMM unit with the given configuration. Currently enabling,
> + * disabling and programming of the 1-D LUT unit is supported.
> + */
> +int rcar_cmm_setup(struct platform_device *pdev,
> + const struct rcar_cmm_config *config)
> +{
> + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> +
> + /* Disable LUT if requested. */
> + if (!config->lut.enable) {
> + if (rcmm->lut.enabled) {
> + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> + rcmm->lut.enabled = false;
> + }
> +
> + return 0;
> + }
> +
> + /* Enable LUT and program the new gamma table values. */
> + if (!rcmm->lut.enabled) {
> + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
> + rcmm->lut.enabled = true;
> + }
> +
> + rcar_cmm_lut_write(rcmm, config->lut.table);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_setup);
> +
> +/*
> + * rcar_cmm_enable() - Enable the CMM unit.
> + * @pdev: The platform device associated with the CMM instance
> + *
> + * Enable the CMM unit by enabling the parent clock.
> + */
> +int rcar_cmm_enable(struct platform_device *pdev)
> +{
> + int ret;
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_enable);
> +
> +/*
> + * rcar_cmm_disable() - Disable the CMM unit.
> + * @pdev: The platform device associated with the CMM instance
> + *
> + * Disable the CMM unit by stopping the parent clock.
> + */
> +void rcar_cmm_disable(struct platform_device *pdev)
> +{
> + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> +
> + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> + rcmm->lut.enabled = false;
> +
> + pm_runtime_put(&pdev->dev);
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_disable);
> +
> +/*
> + * rcar_cmm_init() - Initialize the CMM
> + * @pdev: The platform device associated with the CMM instance
> + *
> + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet,
> + * -ENODEV if the DRM_RCAR_CMM config option is disabled
> + */
> +int rcar_cmm_init(struct platform_device *pdev)
> +{
> + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> +
> + if (!rcmm)
> + return -EPROBE_DEFER;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_init);
> +
> +static int rcar_cmm_probe(struct platform_device *pdev)
> +{
> + struct rcar_cmm *rcmm;
> +
> + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
> + if (!rcmm)
> + return -ENOMEM;
> + platform_set_drvdata(pdev, rcmm);
> +
> + rcmm->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(rcmm->base))
> + return PTR_ERR(rcmm->base);
> +
> + pm_runtime_enable(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static int rcar_cmm_remove(struct platform_device *pdev)
> +{
> + pm_runtime_disable(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rcar_cmm_of_table[] = {
> + { .compatible = "renesas,rcar-gen3-cmm", },
> + { .compatible = "renesas,rcar-gen2-cmm", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
> +
> +static struct platform_driver rcar_cmm_platform_driver = {
> + .probe = rcar_cmm_probe,
> + .remove = rcar_cmm_remove,
> + .driver = {
> + .name = "rcar-cmm",
> + .of_match_table = rcar_cmm_of_table,
> + },
> +};
> +
> +module_platform_driver(rcar_cmm_platform_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>");
> +MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> new file mode 100644
> index 000000000000..358ec03cf48a
> --- /dev/null
> +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> @@ -0,0 +1,60 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * rcar_cmm.h -- R-Car Display Unit Color Management Module
> + *
> + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
> + */
> +
> +#ifndef __RCAR_CMM_H__
> +#define __RCAR_CMM_H__
> +
> +#define CM2_LUT_SIZE 256
> +
> +struct drm_color_lut;
> +struct platform_device;
> +
> +/**
> + * struct rcar_cmm_config - CMM configuration
> + *
> + * @lut: 1D-LUT configuration
> + * @lut.enable: 1D-LUT enable flag
> + * @lut.table: 1D-LUT table entries
> + */
> +struct rcar_cmm_config {
> + struct {
> + bool enable;
> + struct drm_color_lut *table;
> + } lut;
> +};
> +
> +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM)
> +int rcar_cmm_init(struct platform_device *pdev);
> +
> +int rcar_cmm_enable(struct platform_device *pdev);
> +void rcar_cmm_disable(struct platform_device *pdev);
> +
> +int rcar_cmm_setup(struct platform_device *pdev,
> + const struct rcar_cmm_config *config);
> +#else
> +static inline int rcar_cmm_init(struct platform_device *pdev)
> +{
> + return -ENODEV;
Excellent :-D
> +}
> +
> +static inline int rcar_cmm_enable(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static inline void rcar_cmm_disable(struct platform_device *pdev)
> +{
> +}
> +
> +static inline int rcar_cmm_setup(struct platform_device *pdev,
> + const struct rcar_cmm_config *config)
> +{
> + return 0;
> +}
> +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */
> +
> +#endif /* __RCAR_CMM_H__ */
>
next prev parent reply other threads:[~2019-10-15 11:54 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 10:46 [PATCH v5 0/8] drm: rcar-du: Add Color Management Module (CMM) Jacopo Mondi
2019-10-15 10:46 ` [PATCH v5 1/8] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-10-15 11:38 ` Kieran Bingham
2019-10-15 14:03 ` Geert Uytterhoeven
2019-10-15 10:46 ` [PATCH v5 2/8] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-10-15 10:46 ` [PATCH v5 3/8] drm: rcar-du: Add support for CMM Jacopo Mondi
2019-10-15 11:53 ` Kieran Bingham [this message]
2019-10-15 13:17 ` Kieran Bingham
2019-10-15 13:33 ` Jacopo Mondi
2019-10-15 14:26 ` Kieran Bingham
2019-10-15 17:25 ` Laurent Pinchart
2019-10-15 10:46 ` [PATCH v5 4/8] drm: rcar-du: kms: Initialize CMM instances Jacopo Mondi
2019-10-15 10:46 ` [PATCH v5 5/8] drm: rcar-du: crtc: Control CMM operations Jacopo Mondi
2019-10-15 13:15 ` Kieran Bingham
2019-10-15 13:37 ` Jacopo Mondi
2019-10-15 17:54 ` Laurent Pinchart
2019-10-15 19:17 ` Jacopo Mondi
2019-10-15 19:53 ` Laurent Pinchart
2019-10-15 10:46 ` [PATCH v5 6/8] drm: rcar-du: crtc: Register GAMMA_LUT properties Jacopo Mondi
2019-10-15 10:46 ` [PATCH v5 7/8] arm64: dts: renesas: Add CMM units to Gen3 SoCs Jacopo Mondi
2019-10-15 12:52 ` Kieran Bingham
2019-10-15 18:06 ` Laurent Pinchart
2019-10-15 10:46 ` [PATCH v5 8/8] drm: rcar-du: kms: Expand comment in vsps parsing routine Jacopo Mondi
2019-10-15 13:04 ` Kieran Bingham
2019-10-15 16:54 ` [PATCH v5 0/8] drm: rcar-du: Add Color Management Module (CMM) Laurent Pinchart
2019-11-11 11:21 ` Kalakodima Venkata Rajesh (RBEI/ECF3)
2019-11-11 13:06 ` Jacopo Mondi
2020-05-27 7:15 ` Eugeniu Rosca
2020-05-27 7:34 ` Geert Uytterhoeven
2020-05-27 7:40 ` Gotthard Voellmeke
2020-05-27 7:44 ` Eugeniu Rosca
2020-06-05 13:29 ` Jacopo Mondi
2020-06-05 13:41 ` Eugeniu Rosca
2020-06-05 13:53 ` Jacopo Mondi
2020-06-07 2:41 ` Laurent Pinchart
2020-06-08 9:44 ` Eugeniu Rosca
2020-06-12 15:12 ` Jacopo Mondi
2020-06-15 14:17 ` Eugeniu Rosca
2020-07-17 15:06 ` Jacopo Mondi
2020-06-09 14:29 ` Eugeniu Rosca
2020-06-12 15:00 ` Jacopo Mondi
2020-06-12 15:10 ` Laurent Pinchart
2020-06-12 15:36 ` Eugeniu Rosca
2020-06-12 15:50 ` Laurent Pinchart
2020-08-18 9:50 ` Geert Uytterhoeven
2020-06-05 19:05 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2aefe646-45db-aafa-b22b-e1cf9616259d@ideasonboard.com \
--to=kieran.bingham+renesas@ideasonboard.com \
--cc=Harsha.ManjulaMallikarjun@in.bosch.com \
--cc=VenkataRajesh.Kalakodima@in.bosch.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=ezequiel@collabora.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=jacopo+renesas@jmondi.org \
--cc=koji.matsuoka.xm@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=muroya@ksk.co.jp \
--cc=seanpaul@chromium.org \
--cc=uli+renesas@fpond.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).