* [RESEND PATCH v6 0/3] Add support for VBUS detection
@ 2021-01-26 0:38 Guru Das Srinagesh
2021-01-26 0:38 ` [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML Guru Das Srinagesh
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Guru Das Srinagesh @ 2021-01-26 0:38 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, linux-arm-msm, Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Guru Das Srinagesh
[REQUEST]
Thanks Rob for reviewing the dt patches.
Would it be possible for the maintainers and reviewers to review the code as
well?
[COVER LETTER]
Add support to enable VBUS detection in the pm8941 extcon driver.
Changes from v5:
- Gathered Rob H's Acked-by for the dt-bindings patch.
Changes from v4:
- Drop addition of new compatible string in both bindings and driver.
Changes from v3:
- Split bindings into direct conversion of txt file, and addition of VBUS
detection support.
Changes from v2:
- Fix YAML errors in dt binding document.
Changes from v1:
- Change bindings from txt to YAML.
Anirudh Ghayal (1):
extcon: qcom-spmi: Add support for VBUS detection
Guru Das Srinagesh (2):
bindings: pm8941-misc: Convert bindings to YAML
bindings: pm8941-misc: Add support for VBUS detection
.../bindings/extcon/qcom,pm8941-misc.txt | 41 ---------
.../bindings/extcon/qcom,pm8941-misc.yaml | 62 ++++++++++++++
drivers/extcon/extcon-qcom-spmi-misc.c | 99 +++++++++++++++++-----
3 files changed, 142 insertions(+), 60 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 9+ messages in thread
* [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML
2021-01-26 0:38 [RESEND PATCH v6 0/3] Add support for VBUS detection Guru Das Srinagesh
@ 2021-01-26 0:38 ` Guru Das Srinagesh
2021-02-24 16:54 ` Chanwoo Choi
2021-01-26 0:38 ` [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection Guru Das Srinagesh
2021-01-26 0:38 ` [RESEND PATCH v6 3/3] extcon: qcom-spmi: " Guru Das Srinagesh
2 siblings, 1 reply; 9+ messages in thread
From: Guru Das Srinagesh @ 2021-01-26 0:38 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, linux-arm-msm, Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Guru Das Srinagesh
Convert bindings from txt to YAML.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/extcon/qcom,pm8941-misc.txt | 41 ---------------
.../bindings/extcon/qcom,pm8941-misc.yaml | 59 ++++++++++++++++++++++
2 files changed, 59 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
deleted file mode 100644
index 35383adb..0000000
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Qualcomm's PM8941 USB ID Extcon device
-
-Some Qualcomm PMICs have a "misc" module that can be used to detect when
-the USB ID pin has been pulled low or high.
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Should contain "qcom,pm8941-misc";
-
-- reg:
- Usage: required
- Value type: <u32>
- Definition: Should contain the offset to the misc address space
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Should contain the usb id interrupt
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: Should contain the string "usb_id" for the usb id interrupt
-
-Example:
-
- pmic {
- usb_id: misc@900 {
- compatible = "qcom,pm8941-misc";
- reg = <0x900>;
- interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "usb_id";
- };
- }
-
- usb-controller {
- extcon = <&usb_id>;
- };
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
new file mode 100644
index 0000000..e8eea83
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
+
+maintainers:
+ - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+ Some Qualcomm PMICs have a "misc" module that can be used to detect when
+ the USB ID pin has been pulled low or high.
+
+properties:
+ compatible:
+ items:
+ - const: qcom,pm8941-misc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: usb_id
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ usb_id: misc@900 {
+ compatible = "qcom,pm8941-misc";
+ reg = <0x900>;
+ interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "usb_id";
+ };
+ };
+
+ usb-controller {
+ extcon = <&usb_id>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection
2021-01-26 0:38 [RESEND PATCH v6 0/3] Add support for VBUS detection Guru Das Srinagesh
2021-01-26 0:38 ` [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML Guru Das Srinagesh
@ 2021-01-26 0:38 ` Guru Das Srinagesh
2021-02-24 16:55 ` Chanwoo Choi
2021-01-26 0:38 ` [RESEND PATCH v6 3/3] extcon: qcom-spmi: " Guru Das Srinagesh
2 siblings, 1 reply; 9+ messages in thread
From: Guru Das Srinagesh @ 2021-01-26 0:38 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, linux-arm-msm, Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Guru Das Srinagesh, Anirudh Ghayal
Add interrupt support for reporting VBUS detection status that can be
detected via a dedicated PMIC pin.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
index e8eea83..6a9c96f 100644
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -22,11 +22,14 @@ properties:
maxItems: 1
interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
interrupt-names:
+ minItems: 1
items:
- const: usb_id
+ - const: usb_vbus
required:
- compatible
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [RESEND PATCH v6 3/3] extcon: qcom-spmi: Add support for VBUS detection
2021-01-26 0:38 [RESEND PATCH v6 0/3] Add support for VBUS detection Guru Das Srinagesh
2021-01-26 0:38 ` [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML Guru Das Srinagesh
2021-01-26 0:38 ` [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection Guru Das Srinagesh
@ 2021-01-26 0:38 ` Guru Das Srinagesh
2021-02-20 6:34 ` Chanwoo Choi
2021-02-24 16:54 ` Chanwoo Choi
2 siblings, 2 replies; 9+ messages in thread
From: Guru Das Srinagesh @ 2021-01-26 0:38 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, linux-arm-msm, Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Anirudh Ghayal, Kavya Nunna,
Guru Das Srinagesh
From: Anirudh Ghayal <aghayal@codeaurora.org>
VBUS can be detected via a dedicated PMIC pin. Add support
for reporting the VBUS status.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
---
drivers/extcon/extcon-qcom-spmi-misc.c | 99 +++++++++++++++++++++++++++-------
1 file changed, 80 insertions(+), 19 deletions(-)
diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
index 6b836ae..9e8ccfb 100644
--- a/drivers/extcon/extcon-qcom-spmi-misc.c
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/**
* extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
- * detection based on extcon-usb-gpio.c.
+ * and VBUS detection based on extcon-usb-gpio.c.
*
* Copyright (C) 2016 Linaro, Ltd.
* Stephen Boyd <stephen.boyd@linaro.org>
@@ -21,30 +21,56 @@
struct qcom_usb_extcon_info {
struct extcon_dev *edev;
- int irq;
+ int id_irq;
+ int vbus_irq;
struct delayed_work wq_detcable;
unsigned long debounce_jiffies;
};
static const unsigned int qcom_usb_extcon_cable[] = {
+ EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static void qcom_usb_extcon_detect_cable(struct work_struct *work)
{
- bool id;
+ bool state = false;
int ret;
+ union extcon_property_value val;
struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
struct qcom_usb_extcon_info,
wq_detcable);
- /* check ID and update cable state */
- ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
- if (ret)
- return;
+ if (info->id_irq > 0) {
+ /* check ID and update cable state */
+ ret = irq_get_irqchip_state(info->id_irq,
+ IRQCHIP_STATE_LINE_LEVEL, &state);
+ if (ret)
+ return;
+
+ if (!state) {
+ val.intval = true;
+ extcon_set_property(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_SS, val);
+ }
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
+ }
- extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !id);
+ if (info->vbus_irq > 0) {
+ /* check VBUS and update cable state */
+ ret = irq_get_irqchip_state(info->vbus_irq,
+ IRQCHIP_STATE_LINE_LEVEL, &state);
+ if (ret)
+ return;
+
+ if (state) {
+ val.intval = true;
+ extcon_set_property(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_SS, val);
+ }
+ extcon_set_state_sync(info->edev, EXTCON_USB, state);
+ }
}
static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
@@ -79,21 +105,48 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
return ret;
}
+ ret = extcon_set_property_capability(info->edev,
+ EXTCON_USB, EXTCON_PROP_USB_SS);
+ ret |= extcon_set_property_capability(info->edev,
+ EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
+ if (ret) {
+ dev_err(dev, "failed to register extcon props rc=%d\n",
+ ret);
+ return ret;
+ }
+
info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
- info->irq = platform_get_irq_byname(pdev, "usb_id");
- if (info->irq < 0)
- return info->irq;
+ info->id_irq = platform_get_irq_byname(pdev, "usb_id");
+ if (info->id_irq > 0) {
+ ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+ qcom_usb_irq_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for ID IRQ\n");
+ return ret;
+ }
+ }
- ret = devm_request_threaded_irq(dev, info->irq, NULL,
+ info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
+ if (info->vbus_irq > 0) {
+ ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
qcom_usb_irq_handler,
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
pdev->name, info);
- if (ret < 0) {
- dev_err(dev, "failed to request handler for ID IRQ\n");
- return ret;
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for VBUS IRQ\n");
+ return ret;
+ }
+ }
+
+ if (info->id_irq < 0 && info->vbus_irq < 0) {
+ dev_err(dev, "ID and VBUS IRQ not found\n");
+ return -EINVAL;
}
platform_set_drvdata(pdev, info);
@@ -120,8 +173,12 @@ static int qcom_usb_extcon_suspend(struct device *dev)
struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (device_may_wakeup(dev))
- ret = enable_irq_wake(info->irq);
+ if (device_may_wakeup(dev)) {
+ if (info->id_irq > 0)
+ ret = enable_irq_wake(info->id_irq);
+ if (info->vbus_irq > 0)
+ ret = enable_irq_wake(info->vbus_irq);
+ }
return ret;
}
@@ -131,8 +188,12 @@ static int qcom_usb_extcon_resume(struct device *dev)
struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (device_may_wakeup(dev))
- ret = disable_irq_wake(info->irq);
+ if (device_may_wakeup(dev)) {
+ if (info->id_irq > 0)
+ ret = disable_irq_wake(info->id_irq);
+ if (info->vbus_irq > 0)
+ ret = disable_irq_wake(info->vbus_irq);
+ }
return ret;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [RESEND PATCH v6 3/3] extcon: qcom-spmi: Add support for VBUS detection
2021-01-26 0:38 ` [RESEND PATCH v6 3/3] extcon: qcom-spmi: " Guru Das Srinagesh
@ 2021-02-20 6:34 ` Chanwoo Choi
2021-02-24 19:50 ` Guru Das Srinagesh
2021-02-24 16:54 ` Chanwoo Choi
1 sibling, 1 reply; 9+ messages in thread
From: Chanwoo Choi @ 2021-02-20 6:34 UTC (permalink / raw)
To: Guru Das Srinagesh, Andy Gross, Bjorn Andersson, linux-arm-msm,
Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Anirudh Ghayal, Kavya Nunna
Hi,
Please use get_maintainer.pl script when you send the patches.
I didn't receive the patches. I'll review.
Thanks,
Chanwoo Choi
On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote:
> From: Anirudh Ghayal <aghayal@codeaurora.org>
>
> VBUS can be detected via a dedicated PMIC pin. Add support
> for reporting the VBUS status.
>
> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
> Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> ---
> drivers/extcon/extcon-qcom-spmi-misc.c | 99 +++++++++++++++++++++++++++-------
> 1 file changed, 80 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
> index 6b836ae..9e8ccfb 100644
> --- a/drivers/extcon/extcon-qcom-spmi-misc.c
> +++ b/drivers/extcon/extcon-qcom-spmi-misc.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /**
> * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
> - * detection based on extcon-usb-gpio.c.
> + * and VBUS detection based on extcon-usb-gpio.c.
> *
> * Copyright (C) 2016 Linaro, Ltd.
> * Stephen Boyd <stephen.boyd@linaro.org>
> @@ -21,30 +21,56 @@
>
> struct qcom_usb_extcon_info {
> struct extcon_dev *edev;
> - int irq;
> + int id_irq;
> + int vbus_irq;
> struct delayed_work wq_detcable;
> unsigned long debounce_jiffies;
> };
>
> static const unsigned int qcom_usb_extcon_cable[] = {
> + EXTCON_USB,
> EXTCON_USB_HOST,
> EXTCON_NONE,
> };
>
> static void qcom_usb_extcon_detect_cable(struct work_struct *work)
> {
> - bool id;
> + bool state = false;
> int ret;
> + union extcon_property_value val;
> struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
> struct qcom_usb_extcon_info,
> wq_detcable);
>
> - /* check ID and update cable state */
> - ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
> - if (ret)
> - return;
> + if (info->id_irq > 0) {
> + /* check ID and update cable state */
> + ret = irq_get_irqchip_state(info->id_irq,
> + IRQCHIP_STATE_LINE_LEVEL, &state);
> + if (ret)
> + return;
> +
> + if (!state) {
> + val.intval = true;
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS, val);
> + }
> + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
> + }
>
> - extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !id);
> + if (info->vbus_irq > 0) {
> + /* check VBUS and update cable state */
> + ret = irq_get_irqchip_state(info->vbus_irq,
> + IRQCHIP_STATE_LINE_LEVEL, &state);
> + if (ret)
> + return;
> +
> + if (state) {
> + val.intval = true;
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS, val);
> + }
> + extcon_set_state_sync(info->edev, EXTCON_USB, state);
> + }
> }
>
> static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
> @@ -79,21 +105,48 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = extcon_set_property_capability(info->edev,
> + EXTCON_USB, EXTCON_PROP_USB_SS);
> + ret |= extcon_set_property_capability(info->edev,
> + EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
> + if (ret) {
> + dev_err(dev, "failed to register extcon props rc=%d\n",
> + ret);
> + return ret;
> + }
> +
> info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
> INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
>
> - info->irq = platform_get_irq_byname(pdev, "usb_id");
> - if (info->irq < 0)
> - return info->irq;
> + info->id_irq = platform_get_irq_byname(pdev, "usb_id");
> + if (info->id_irq > 0) {
> + ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
> + qcom_usb_irq_handler,
> + IRQF_TRIGGER_RISING |
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + pdev->name, info);
> + if (ret < 0) {
> + dev_err(dev, "failed to request handler for ID IRQ\n");
> + return ret;
> + }
> + }
>
> - ret = devm_request_threaded_irq(dev, info->irq, NULL,
> + info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
> + if (info->vbus_irq > 0) {
> + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
> qcom_usb_irq_handler,
> IRQF_TRIGGER_RISING |
> IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> pdev->name, info);
> - if (ret < 0) {
> - dev_err(dev, "failed to request handler for ID IRQ\n");
> - return ret;
> + if (ret < 0) {
> + dev_err(dev, "failed to request handler for VBUS IRQ\n");
> + return ret;
> + }
> + }
> +
> + if (info->id_irq < 0 && info->vbus_irq < 0) {
> + dev_err(dev, "ID and VBUS IRQ not found\n");
> + return -EINVAL;
> }
>
> platform_set_drvdata(pdev, info);
> @@ -120,8 +173,12 @@ static int qcom_usb_extcon_suspend(struct device *dev)
> struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (device_may_wakeup(dev))
> - ret = enable_irq_wake(info->irq);
> + if (device_may_wakeup(dev)) {
> + if (info->id_irq > 0)
> + ret = enable_irq_wake(info->id_irq);
> + if (info->vbus_irq > 0)
> + ret = enable_irq_wake(info->vbus_irq);
> + }
>
> return ret;
> }
> @@ -131,8 +188,12 @@ static int qcom_usb_extcon_resume(struct device *dev)
> struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (device_may_wakeup(dev))
> - ret = disable_irq_wake(info->irq);
> + if (device_may_wakeup(dev)) {
> + if (info->id_irq > 0)
> + ret = disable_irq_wake(info->id_irq);
> + if (info->vbus_irq > 0)
> + ret = disable_irq_wake(info->vbus_irq);
> + }
>
> return ret;
> }
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RESEND PATCH v6 3/3] extcon: qcom-spmi: Add support for VBUS detection
2021-01-26 0:38 ` [RESEND PATCH v6 3/3] extcon: qcom-spmi: " Guru Das Srinagesh
2021-02-20 6:34 ` Chanwoo Choi
@ 2021-02-24 16:54 ` Chanwoo Choi
1 sibling, 0 replies; 9+ messages in thread
From: Chanwoo Choi @ 2021-02-24 16:54 UTC (permalink / raw)
To: Guru Das Srinagesh, Andy Gross, Bjorn Andersson, linux-arm-msm,
Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Anirudh Ghayal, Kavya Nunna
Hi,
On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote:
> From: Anirudh Ghayal <aghayal@codeaurora.org>
>
> VBUS can be detected via a dedicated PMIC pin. Add support
> for reporting the VBUS status.
>
> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
> Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> ---
> drivers/extcon/extcon-qcom-spmi-misc.c | 99 +++++++++++++++++++++++++++-------
> 1 file changed, 80 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
> index 6b836ae..9e8ccfb 100644
> --- a/drivers/extcon/extcon-qcom-spmi-misc.c
> +++ b/drivers/extcon/extcon-qcom-spmi-misc.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /**
> * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
> - * detection based on extcon-usb-gpio.c.
> + * and VBUS detection based on extcon-usb-gpio.c.
> *
> * Copyright (C) 2016 Linaro, Ltd.
> * Stephen Boyd <stephen.boyd@linaro.org>
> @@ -21,30 +21,56 @@
>
> struct qcom_usb_extcon_info {
> struct extcon_dev *edev;
> - int irq;
> + int id_irq;
> + int vbus_irq;
> struct delayed_work wq_detcable;
> unsigned long debounce_jiffies;
> };
>
> static const unsigned int qcom_usb_extcon_cable[] = {
> + EXTCON_USB,
> EXTCON_USB_HOST,
> EXTCON_NONE,
> };
>
> static void qcom_usb_extcon_detect_cable(struct work_struct *work)
> {
> - bool id;
> + bool state = false;
> int ret;
> + union extcon_property_value val;
> struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
> struct qcom_usb_extcon_info,
> wq_detcable);
>
> - /* check ID and update cable state */
> - ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
> - if (ret)
> - return;
> + if (info->id_irq > 0) {
> + /* check ID and update cable state */
> + ret = irq_get_irqchip_state(info->id_irq,
> + IRQCHIP_STATE_LINE_LEVEL, &state);
> + if (ret)
> + return;
> +
> + if (!state) {
> + val.intval = true;
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS, val);
> + }
> + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
> + }
>
> - extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !id);
> + if (info->vbus_irq > 0) {
> + /* check VBUS and update cable state */
> + ret = irq_get_irqchip_state(info->vbus_irq,
> + IRQCHIP_STATE_LINE_LEVEL, &state);
> + if (ret)
> + return;
> +
> + if (state) {
> + val.intval = true;
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS, val);
> + }
> + extcon_set_state_sync(info->edev, EXTCON_USB, state);
> + }
> }
>
> static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
> @@ -79,21 +105,48 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = extcon_set_property_capability(info->edev,
> + EXTCON_USB, EXTCON_PROP_USB_SS);
> + ret |= extcon_set_property_capability(info->edev,
> + EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
> + if (ret) {
> + dev_err(dev, "failed to register extcon props rc=%d\n",
> + ret);
> + return ret;
> + }
> +
> info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
> INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
>
> - info->irq = platform_get_irq_byname(pdev, "usb_id");
> - if (info->irq < 0)
> - return info->irq;
> + info->id_irq = platform_get_irq_byname(pdev, "usb_id");
> + if (info->id_irq > 0) {
> + ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
> + qcom_usb_irq_handler,
> + IRQF_TRIGGER_RISING |
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + pdev->name, info);
> + if (ret < 0) {
> + dev_err(dev, "failed to request handler for ID IRQ\n");
> + return ret;
> + }
> + }
>
> - ret = devm_request_threaded_irq(dev, info->irq, NULL,
> + info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
> + if (info->vbus_irq > 0) {
> + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
> qcom_usb_irq_handler,
> IRQF_TRIGGER_RISING |
> IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> pdev->name, info);
> - if (ret < 0) {
> - dev_err(dev, "failed to request handler for ID IRQ\n");
> - return ret;
> + if (ret < 0) {
> + dev_err(dev, "failed to request handler for VBUS IRQ\n");
> + return ret;
> + }
> + }
> +
> + if (info->id_irq < 0 && info->vbus_irq < 0) {
> + dev_err(dev, "ID and VBUS IRQ not found\n");
> + return -EINVAL;
> }
>
> platform_set_drvdata(pdev, info);
> @@ -120,8 +173,12 @@ static int qcom_usb_extcon_suspend(struct device *dev)
> struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (device_may_wakeup(dev))
> - ret = enable_irq_wake(info->irq);
> + if (device_may_wakeup(dev)) {
> + if (info->id_irq > 0)
> + ret = enable_irq_wake(info->id_irq);
> + if (info->vbus_irq > 0)
> + ret = enable_irq_wake(info->vbus_irq);
> + }
>
> return ret;
> }
> @@ -131,8 +188,12 @@ static int qcom_usb_extcon_resume(struct device *dev)
> struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (device_may_wakeup(dev))
> - ret = disable_irq_wake(info->irq);
> + if (device_may_wakeup(dev)) {
> + if (info->id_irq > 0)
> + ret = disable_irq_wake(info->id_irq);
> + if (info->vbus_irq > 0)
> + ret = disable_irq_wake(info->vbus_irq);
> + }
>
> return ret;
> }
>
Looks good to me. Apply it. for v5.13-rc1.
Thanks,
Chanwoo Choi
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML
2021-01-26 0:38 ` [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML Guru Das Srinagesh
@ 2021-02-24 16:54 ` Chanwoo Choi
0 siblings, 0 replies; 9+ messages in thread
From: Chanwoo Choi @ 2021-02-24 16:54 UTC (permalink / raw)
To: Guru Das Srinagesh, Andy Gross, Bjorn Andersson, linux-arm-msm,
Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd
On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote:
> Convert bindings from txt to YAML.
>
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> .../bindings/extcon/qcom,pm8941-misc.txt | 41 ---------------
> .../bindings/extcon/qcom,pm8941-misc.yaml | 59 ++++++++++++++++++++++
> 2 files changed, 59 insertions(+), 41 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
> create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
>
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
> deleted file mode 100644
> index 35383adb..0000000
> --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Qualcomm's PM8941 USB ID Extcon device
> -
> -Some Qualcomm PMICs have a "misc" module that can be used to detect when
> -the USB ID pin has been pulled low or high.
> -
> -PROPERTIES
> -
> -- compatible:
> - Usage: required
> - Value type: <string>
> - Definition: Should contain "qcom,pm8941-misc";
> -
> -- reg:
> - Usage: required
> - Value type: <u32>
> - Definition: Should contain the offset to the misc address space
> -
> -- interrupts:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: Should contain the usb id interrupt
> -
> -- interrupt-names:
> - Usage: required
> - Value type: <stringlist>
> - Definition: Should contain the string "usb_id" for the usb id interrupt
> -
> -Example:
> -
> - pmic {
> - usb_id: misc@900 {
> - compatible = "qcom,pm8941-misc";
> - reg = <0x900>;
> - interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
> - interrupt-names = "usb_id";
> - };
> - }
> -
> - usb-controller {
> - extcon = <&usb_id>;
> - };
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> new file mode 100644
> index 0000000..e8eea83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
> +
> +maintainers:
> + - Guru Das Srinagesh <gurus@codeaurora.org>
> +
> +description: |
> + Some Qualcomm PMICs have a "misc" module that can be used to detect when
> + the USB ID pin has been pulled low or high.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,pm8941-misc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + items:
> + - const: usb_id
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + pmic {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> +
> + usb_id: misc@900 {
> + compatible = "qcom,pm8941-misc";
> + reg = <0x900>;
> + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "usb_id";
> + };
> + };
> +
> + usb-controller {
> + extcon = <&usb_id>;
> + };
>
Applied it.
Thanks,
Chanwoo Choi
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection
2021-01-26 0:38 ` [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection Guru Das Srinagesh
@ 2021-02-24 16:55 ` Chanwoo Choi
0 siblings, 0 replies; 9+ messages in thread
From: Chanwoo Choi @ 2021-02-24 16:55 UTC (permalink / raw)
To: Guru Das Srinagesh, Andy Gross, Bjorn Andersson, linux-arm-msm,
Rob Herring
Cc: Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Anirudh Ghayal
On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote:
> Add interrupt support for reporting VBUS detection status that can be
> detected via a dedicated PMIC pin.
>
> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> index e8eea83..6a9c96f 100644
> --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> @@ -22,11 +22,14 @@ properties:
> maxItems: 1
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
>
> interrupt-names:
> + minItems: 1
> items:
> - const: usb_id
> + - const: usb_vbus
>
> required:
> - compatible
>
Applied it.
Thanks,
Chanwoo Choi
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RESEND PATCH v6 3/3] extcon: qcom-spmi: Add support for VBUS detection
2021-02-20 6:34 ` Chanwoo Choi
@ 2021-02-24 19:50 ` Guru Das Srinagesh
0 siblings, 0 replies; 9+ messages in thread
From: Guru Das Srinagesh @ 2021-02-24 19:50 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Andy Gross, Bjorn Andersson, linux-arm-msm, Rob Herring,
Subbaraman Narayanamurthy, David Collins, devicetree,
linux-kernel, Stephen Boyd, Anirudh Ghayal, Kavya Nunna
On Sat, Feb 20, 2021 at 03:34:52PM +0900, Chanwoo Choi wrote:
> Hi,
>
> Please use get_maintainer.pl script when you send the patches.
> I didn't receive the patches. I'll review.
>
> Thanks,
> Chanwoo Choi
Thanks for reviewing and accepting the patches, Chanwoo. Sorry, I missed
out on using the get_maintainer.pl script - instead, I sent it to those
listed under "ARM/QUALCOMM SUPPORT" in the MAINTAINERS file as
drivers/extcon/extcon-qcom* is listed in that section.
Thank you.
Guru Das.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-02-24 19:51 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-26 0:38 [RESEND PATCH v6 0/3] Add support for VBUS detection Guru Das Srinagesh
2021-01-26 0:38 ` [RESEND PATCH v6 1/3] bindings: pm8941-misc: Convert bindings to YAML Guru Das Srinagesh
2021-02-24 16:54 ` Chanwoo Choi
2021-01-26 0:38 ` [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection Guru Das Srinagesh
2021-02-24 16:55 ` Chanwoo Choi
2021-01-26 0:38 ` [RESEND PATCH v6 3/3] extcon: qcom-spmi: " Guru Das Srinagesh
2021-02-20 6:34 ` Chanwoo Choi
2021-02-24 19:50 ` Guru Das Srinagesh
2021-02-24 16:54 ` Chanwoo Choi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).