* Re: PPC476 hangs during tlb flush after calling /init in crash kernel with linux 5.4+
2021-04-28 6:08 ` Christophe Leroy
@ 2021-04-28 13:56 ` Eddie James
2021-04-28 14:18 ` Eddie James
1 sibling, 0 replies; 6+ messages in thread
From: Eddie James @ 2021-04-28 13:56 UTC (permalink / raw)
To: Christophe Leroy, linuxppc-dev
Cc: linux-kernel, benh, paulus, mpe, npiggin, miltonm
On Wed, 2021-04-28 at 08:08 +0200, Christophe Leroy wrote:
>
> Le 28/04/2021 à 00:42, Eddie James a écrit :
> > On Tue, 2021-04-27 at 19:26 +0200, Christophe Leroy wrote:
> > > Hi Eddies,
> > >
> > > Le 27/04/2021 à 19:03, Eddie James a écrit :
> > > > Hi all,
> > > >
> > > > I'm having a problem in simulation and hardware where my PPC476
> > > > processor stops executing instructions after callling /init. In
> > > > my
> > > > case
> > > > this is a bash script. The code descends to flush the TLB, and
> > > > somewhere in the loop in _tlbil_pid, the PC goes to
> > > > InstructionTLBError47x but does not go any further. This only
> > > > occurs in
> > > > the crash kernel environment, which is using the same kernel,
> > > > initramfs, and init script as the main kernel, which executed
> > > > fine.
> > > > I
> > > > do not see this problem with linux 4.19 or 3.10. I do see it
> > > > with
> > > > 5.4
> > > > and 5.10. I see a fair amount of refactoring in the PPC memory
> > > > management area between 4.19 and 5.4. Can anyone point me in a
> > > > direction to debug this further? My stack trace is below as I
> > > > can
> > > > run
> > > > gdb in simulation.
> > >
> > > Can you bisect to pin point the culprit commit ?
> >
> > Hi, thanks for your prompt reply.
> >
> > Good idea! I have bisected to:
> >
> > commit 9e849f231c3c72d4c3c1b07c9cd19ae789da0420 (b8-bad,
> > refs/bisect/bad)
> > Author: Christophe Leroy <christophe.leroy@c-s.fr>
> > Date: Thu Feb 21 19:08:40 2019 +0000
> >
> > powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks.
> >
> > Now that mmu_mapin_ram() is able to handle other blocks
> > than the one starting at 0, the WII can use it for all
> > its blocks.
> >
> > Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> >
> > I also confirmed that reverting this commit resolves the issue in
> > 5.4+.
> >
> > Now, I don't understand why this is problematic or what is really
> > happening... Reverting is probably not the desired solution.
> >
>
> Can you provide the 'dmesg' or a dump of the logs printed by the
> kernel at boottime ?
Yes:
[ 0.000000] Linux version 5.4.85-a19ab63.ppcnf-fsp2 (oe-user@oe-host
) (gcc ve
rsion 8.3.0 (GCC)) #1 Tue Mar 30 15:32:31 UTC 2021
[ 0.000000] Found initrd at 0xcf6a7000:0xcfffb09f
[ 0.000000] Using FSP-2 machine description
[ 0.000000] Found legacy serial port 0 for /plb4/opb/serial@b0020000
[ 0.000000] mem=10b0020000, taddr=10b0020000, irq=0, clk=20833333,
speed=11
5200
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x4000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x0000000040800120
[ 0.000000] possible = 0x0000000040800120
[ 0.000000] always = 0x0000000000000020
[ 0.000000] cpu_user_features = 0x8c008000 0x00000000
[ 0.000000] mmu_features = 0x00140020
[ 0.000000] physical_start = 0xc000000
[ 0.000000] -----------------------------------------------------
[ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x4000000
[ 0.000000] Memory hole size: 192MB
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x000000000c000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x000000000c000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x000000000c000000-
0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] Normal zone: 160 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] MMU: Allocated 278528 bytes of context maps for 65535
contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
16224
[ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=9
rootwait roo
t=/dev/mmcblk0p2 elfcorehdr=209456K maxcpus=1
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes, lin
ear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes, line
ar)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 42028K/65536K available (7136K kernel code, 620K
rwdata,
1916K rodata, 2080K init, 233K bss, 23508K reserved, 0K cma-reserved)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
[ 0.000000] * 0xd1000000..0xfffdf000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0x2c0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0x2c8
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0x350
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0x358
[ 0.000000] UIC4 (32 IRQ sources) at DCR 0x360
[ 0.000000] UIC5 (32 IRQ sources) at DCR 0x368
[ 0.000000] UIC6 (32 IRQ sources) at DCR 0x370
[ 0.000000] UIC7 (32 IRQ sources) at DCR 0x2d0
[ 0.000000] UIC8 (32 IRQ sources) at DCR 0x2d8
[ 0.000000] UIC17 (32 IRQ sources) at DCR 0x320
[ 0.000000] UIC18 (32 IRQ sources) at DCR 0x328
[ 0.000000] UIC19 (32 IRQ sources) at DCR 0x330
[ 0.000000] UIC20 (32 IRQ sources) at DCR 0x338
[ 0.000000] UIC21 (32 IRQ sources) at DCR 0x340
[ 0.000000] UIC22 (32 IRQ sources) at DCR 0x348
[ 0.000000] UIC9 (32 IRQ sources) at DCR 0x2e0
[ 0.000000] UIC10 (32 IRQ sources) at DCR 0x2e8
[ 0.000000] UIC11 (32 IRQ sources) at DCR 0x2f0
[ 0.000000] UIC12 (32 IRQ sources) at DCR 0x2f8
[ 0.000000] UIC13 (32 IRQ sources) at DCR 0x300
[ 0.000000] UIC14 (32 IRQ sources) at DCR 0x308
[ 0.000000] UIC15 (32 IRQ sources) at DCR 0x310
[ 0.000000] UIC16 (32 IRQ sources) at DCR 0x318
[ 0.000000] random: get_random_u32 called from
start_kernel+0x32c/0x500 with
crng_init=0
[ 0.000000] time_init: decrementer frequency = 166.666667 MHz
[ 0.000000] time_init: processor frequency = 1333.333333 MHz
[ 0.000004] clocksource: timebase: mask: 0xffffffffffffffff
max_cycles: 0x267
03d839d, max_idle_ns: 440795207088 ns
[ 0.000007] clocksource: timebase mult[6000000] shift[24] registered
[ 0.000011] clockevent: decrementer mult[2aaaaaac] shift[32] cpu[0]
[ 0.000071] pid_max: default: 32768 minimum: 301
[ 0.000107] Mount-cache hash table entries: 1024 (order: 0, 4096
bytes, linea
r)
[ 0.000111] Mountpoint-cache hash table entries: 1024 (order: 0,
4096 bytes,
linear)
[ 0.000580] devtmpfs: initialized
[ 0.002029] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, ma
x_idle_ns: 7645041785100000 ns
[ 0.002034] futex hash table entries: 256 (order: -1, 3072 bytes,
linear)
[ 0.002146] NET: Registered protocol family 16
[ 0.004958] SCSI subsystem initialized
[ 0.004973] libata version 3.00 loaded.
[ 0.005003] usbcore: registered new interface driver usbfs
[ 0.005019] usbcore: registered new interface driver hub
[ 0.005031] usbcore: registered new device driver usb
[ 0.005043] pps_core: LinuxPPS API ver. 1 registered
[ 0.005045] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giome
tti <giometti@linux.it>
[ 0.005052] PTP clock support registered
[ 0.005257] clocksource: Switched to clocksource timebase
[ 0.311619] thermal_sys: Registered thermal governor 'step_wise'
[ 0.311665] NET: Registered protocol family 2
[ 0.311834] tcp_listen_portaddr_hash hash table entries: 512 (order:
0, 4096
bytes, linear)
[ 0.311844] TCP established hash table entries: 1024 (order: 0, 4096
bytes, l
inear)
[ 0.311855] TCP bind hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 0.311864] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.311877] UDP hash table entries: 256 (order: 0, 4096 bytes,
linear)
[ 0.311885] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes,
linear)
[ 0.311918] NET: Registered protocol family 1
[ 0.311994] RPC: Registered named UNIX socket transport module.
[ 0.311996] RPC: Registered udp transport module.
[ 0.311999] RPC: Registered tcp transport module.
[ 0.312001] RPC: Registered tcp NFSv4.1 backchannel transport
module.
[ 0.312043] Trying to unpack rootfs image as initramfs...
[ 0.632637] Freeing initrd memory: 9552K
[ 0.634361] shadow_disr_to_uic15: 0x00000020 to uic15_pr
[ 0.635621] workingset: timestamp_bits=30 max_order=14
bucket_order=0
[ 0.638710] NFS: Registering the id_resolver key type
[ 0.638717] Key type id_resolver registered
[ 0.638720] Key type id_legacy registered
[ 0.638730] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red
Hat, Inc.
[ 0.638858] fuse: init (API version 7.31)
[ 0.664372] io scheduler mq-deadline registered
[ 0.664375] io scheduler kyber registered
[ 0.664573] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.665728] printk: console [ttyS0] disabled
[ 0.685664] serial8250.0: ttyS0 at MMIO 0x10b0020000 (irq = 47,
base_baud = 1
302083) is a 16550A
[ 0.693859] printk: console [ttyS0] enabled
[ 0.694150] printk: console [ttyS0] disabled
[ 0.694212] 10b0020000.serial: ttyS0 at MMIO 0x10b0020000 (irq = 47,
base_bau
d = 1302083) is a 16550
[ 0.702632] printk: console [ttyS0] enabled
[ 0.704642] brd: module loaded
[ 0.704730] slram: not enough parameters.
[ 0.704792] PPP generic driver version 2.4.2
[ 0.704875] PPP Deflate Compression module registered
[ 0.704941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.705052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.705148] usbcore: registered new interface driver usb-storage
[ 0.705248] usbcore: registered new interface driver
usbserial_generic
[ 0.705341] usbserial: USB Serial support registered for generic
[ 0.705428] usbcore: registered new interface driver pl2303
[ 0.705508] usbserial: USB Serial support registered for pl2303
[ 0.705592] booke_wdt: powerpc book-e watchdog driver loaded
[ 0.705769] sdhci: Secure Digital Host Controller Interface driver
[ 0.705849] sdhci: Copyright(c) Pierre Ossman
[ 0.705906] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.706033] mmc0: Invalid maximum block size, assuming 512 bytes
[ 0.706112] mmc0 bounce up to 128 segments into one, max segment
size 65536 b
ytes
[ 0.731266] mmc0: SDHCI controller on 10020c0000.emmc
[10020c0000.emmc] using
DMA
[ 0.731422] oprofile: using timer interrupt.
[ 0.731546] Initializing XFRM netlink socket
[ 0.731789] NET: Registered protocol family 10
[ 0.732013] Segment Routing with IPv6
[ 0.732096] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.732331] NET: Registered protocol family 17
[ 0.732414] sctp: Hash tables configured (bind 1024/1024)
[ 0.732591] Key type dns_resolver registered
[ 0.732698] drmem: No dynamic reconfiguration memory found
[ 0.732888] hctosys: unable to open rtc device (rtc0)
[ 0.734057] Freeing unused kernel memory: 2080K
[ 0.734116] This architecture does not have kernel memory
protection.
[ 0.734199] Run /init as init process
>
> The difference with this commit is that if there are several
> memblocks, all get mapped. Maybe your
> target doesn't like it.
>
> You are talking about simulation, are you using QEMU ? If yes can you
> provide details so that I can
> try and reproduce the issue ?
No, we use Windriver simics for this system. I'm not sure if QEMU has a
model for the PPC476... and I suspect it won't recreate with a more
generic 32 bit ppc machine, though I can try and find out.
Thanks,
Eddie
>
> Thanks
> Christophe
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: PPC476 hangs during tlb flush after calling /init in crash kernel with linux 5.4+
2021-04-28 6:08 ` Christophe Leroy
2021-04-28 13:56 ` Eddie James
@ 2021-04-28 14:18 ` Eddie James
1 sibling, 0 replies; 6+ messages in thread
From: Eddie James @ 2021-04-28 14:18 UTC (permalink / raw)
To: Christophe Leroy, linuxppc-dev
Cc: linux-kernel, benh, paulus, mpe, npiggin, miltonm
On Wed, 2021-04-28 at 08:08 +0200, Christophe Leroy wrote:
>
> Le 28/04/2021 à 00:42, Eddie James a écrit :
> > On Tue, 2021-04-27 at 19:26 +0200, Christophe Leroy wrote:
> > > Hi Eddies,
> > >
> > > Le 27/04/2021 à 19:03, Eddie James a écrit :
> > > > Hi all,
> > > >
> > > > I'm having a problem in simulation and hardware where my PPC476
> > > > processor stops executing instructions after callling /init. In
> > > > my
> > > > case
> > > > this is a bash script. The code descends to flush the TLB, and
> > > > somewhere in the loop in _tlbil_pid, the PC goes to
> > > > InstructionTLBError47x but does not go any further. This only
> > > > occurs in
> > > > the crash kernel environment, which is using the same kernel,
> > > > initramfs, and init script as the main kernel, which executed
> > > > fine.
> > > > I
> > > > do not see this problem with linux 4.19 or 3.10. I do see it
> > > > with
> > > > 5.4
> > > > and 5.10. I see a fair amount of refactoring in the PPC memory
> > > > management area between 4.19 and 5.4. Can anyone point me in a
> > > > direction to debug this further? My stack trace is below as I
> > > > can
> > > > run
> > > > gdb in simulation.
> > >
> > > Can you bisect to pin point the culprit commit ?
> >
> > Hi, thanks for your prompt reply.
> >
> > Good idea! I have bisected to:
> >
> > commit 9e849f231c3c72d4c3c1b07c9cd19ae789da0420 (b8-bad,
> > refs/bisect/bad)
> > Author: Christophe Leroy <christophe.leroy@c-s.fr>
> > Date: Thu Feb 21 19:08:40 2019 +0000
> >
> > powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks.
> >
> > Now that mmu_mapin_ram() is able to handle other blocks
> > than the one starting at 0, the WII can use it for all
> > its blocks.
> >
> > Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> >
> > I also confirmed that reverting this commit resolves the issue in
> > 5.4+.
> >
> > Now, I don't understand why this is problematic or what is really
> > happening... Reverting is probably not the desired solution.
> >
>
> Can you provide the 'dmesg' or a dump of the logs printed by the
> kernel at boottime ?
>
> The difference with this commit is that if there are several
> memblocks, all get mapped. Maybe your
> target doesn't like it.
>
> You are talking about simulation, are you using QEMU ? If yes can you
> provide details so that I can
> try and reproduce the issue ?
Milton mentioned the kexec debug output might be useful:
lzma_decompress_file: read on uImage of 65536
bytes failed
kernel: 0xb75b3010 kernel_size: 0x4f1231
0000000000000000-0000000040000000 : 0
get base memory ranges:1
usable memory rgns size:1 base:0 size:10000000
exclude_range sorted exclude_range[0] start:0, end:bb7000
setup_memory_ranges memory_range[0] start:bb7001, end:30000000
CRASH MEMORY RANGES
0000000000000000-0000000000010000
0000000000010000-000000000c000000
0000000010000000-000000002d600000
get_crash_notes_per_cpu: crash_notes addr = 2ce84e00, size = 300
Elf header: p_type = 4, p_offset = 0x2ce84e00 p_paddr = 0x2ce84e00
p_vaddr = 0x0
p_filesz = 0x12c p_memsz = 0x12c
vmcoreinfo header: p_type = 4, p_offset = 0x2c8d4000 p_paddr =
0x2c8d4000 p_vadd
r = 0x0 p_filesz = 0x1024 p_memsz = 0x1024
Elf header: p_type = 1, p_offset = 0xcc7e000 p_paddr = 0x0 p_vaddr =
0xc0000000
p_filesz = 0x10000 p_memsz = 0x10000
Elf header: p_type = 1, p_offset = 0x10000 p_paddr = 0x10000 p_vaddr =
0xc001000
0 p_filesz = 0xbff0000 p_memsz = 0xbff0000
Elf header: p_type = 1, p_offset = 0x10000000 p_paddr = 0x10000000
p_vaddr = 0xd
0000000 p_filesz = 0x1d600000 p_memsz = 0x1d600000
Command line after adding elfcorehdr: elfcorehdr=209464K
sym: .data info: 03 other: 00 shndx: 7 value: 0 size: 0
sym: .data value: ffffbf0 addr: fffc032
sym: .data info: 03 other: 00 shndx: 7 value: 0 size: 0
sym: .data value: ffffbf0 addr: fffc03a
sym: sha256_starts info: 12 other: 00 shndx: 2 value: 92c size: 70
sym: sha256_starts value: fffc950 addr: fffc044
sym: sha256_update info: 12 other: 00 shndx: 2 value: 36c4 size: c
sym: sha256_update value: ffff6e8 addr: fffc058
sym: sha256_finish info: 12 other: 00 shndx: 2 value: 36d0 size: 1a4
sym: sha256_finish value: ffff6f4 addr: fffc070
sym: memcmp info: 12 other: 00 shndx: 2 value: 5fc size: 38
sym: memcmp value: fffc620 addr: fffc080
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff898 addr: fffc08e
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8c8 addr: fffc092
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff898 addr: fffc096
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc09c
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8b8 addr: fffc0a2
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8b8 addr: fffc0a6
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8c8 addr: fffc0aa
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc0ac
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc0b8
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8ce addr: fffc0ca
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8ce addr: fffc0d2
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc0d8
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8d0 addr: fffc0de
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8d0 addr: fffc0e2
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc0e4
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc0f0
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc104
sym: _restgpr_28_x info: 12 other: 00 shndx: 2 value: 888 size: 0
sym: _restgpr_28_x value: fffc8ac addr: fffc110
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8e0 addr: fffc11a
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8e0 addr: fffc122
sym: printf info: 12 other: 00 shndx: 2 value: 524 size: 68
sym: printf value: fffc548 addr: fffc128
sym: setup_arch info: 12 other: 00 shndx: 2 value: 91c size: 4
sym: setup_arch value: fffc940 addr: fffc12c
sym: skip_checks info: 11 other: 00 shndx: 8 value: 0 size: 4
sym: skip_checks value: ffffd50 addr: fffc132
sym: skip_checks info: 11 other: 00 shndx: 8 value: 0 size: 4
sym: skip_checks value: ffffd50 addr: fffc136
sym: verify_sha256_digest info: 12 other: 00 shndx: 2 value: 0 size: f0
sym: verify_sha256_digest value: fffc024 addr: fffc140
sym: post_verification_setup_arch info: 12 other: 00 shndx: 2 value:
920 size: 4
sym: post_verification_setup_arch value: fffc944 addr: fffc15c
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8f2 addr: fffc16e
sym: .rodata.str1.1 info: 03 other: 00 shndx: 4 value: 0 size: 0
sym: .rodata.str1.1 value: ffff8f2 addr: fffc18a
sym: _restgpr_20_x info: 12 other: 00 shndx: 2 value: 868 size: 0
sym: _restgpr_20_x value: fffc88c addr: fffc1a8
sym: putchar info: 12 other: 00 shndx: 2 value: 928 size: 4
sym: putchar value: fffc94c addr: fffc1cc
sym: putchar info: 12 other: 00 shndx: 2 value: 928 size: 4
sym: putchar value: fffc94c addr: fffc244
sym: __lshrdi3 info: 10 other: 00 shndx: 2 value: 8f8 size: 0
sym: __lshrdi3 value: fffc91c addr: fffc2c4
sym: putchar info: 12 other: 00 shndx: 2 value: 928 size: 4
sym: putchar value: fffc94c addr: fffc4e4
sym: vsprintf info: 12 other: 00 shndx: 2 value: 13c size: 38c
sym: vsprintf value: fffc160 addr: fffc534
sym: vsprintf info: 12 other: 00 shndx: 2 value: 13c size: 38c
sym: vsprintf value: fffc160 addr: fffc59c
sym: my_thread_ptr info: 11 other: 00 shndx: 8 value: 8 size: 4
sym: my_thread_ptr value: ffffd58 addr: fffc76a
sym: my_thread_ptr info: 11 other: 00 shndx: 8 value: 8 size: 4
sym: my_thread_ptr value: ffffd58 addr: fffc76e
sym: stack info: 11 other: 00 shndx: 8 value: 10 size: 4
sym: stack value: ffffd60 addr: fffc776
sym: stack info: 11 other: 00 shndx: 8 value: 10 size: 4
sym: stack value: ffffd60 addr: fffc77a
sym: purgatory info: 12 other: 00 shndx: 2 value: f0 size: 4c
sym: purgatory value: fffc114 addr: fffc784
sym: dt_offset info: 11 other: 00 shndx: 8 value: c size: 4
sym: dt_offset value: ffffd5c addr: fffc79e
sym: dt_offset info: 11 other: 00 shndx: 8 value: c size: 4
sym: dt_offset value: ffffd5c addr: fffc7a2
sym: kernel info: 11 other: 00 shndx: 8 value: 4 size: 4
sym: kernel value: ffffd54 addr: fffc7ba
sym: kernel info: 11 other: 00 shndx: 8 value: 4 size: 4
sym: kernel value: ffffd54 addr: fffc7be
sym: memcpy info: 12 other: 00 shndx: 2 value: 5d8 size: 24
sym: memcpy value: fffc5fc addr: ffff648
sym: memcpy info: 12 other: 00 shndx: 2 value: 5d8 size: 24
sym: memcpy value: fffc5fc addr: ffff65c
sym: sha256_process info: 12 other: 00 shndx: 2 value: 99c size: 2be0
sym: sha256_process value: fffc9c0 addr: ffff66c
sym: sha256_process info: 12 other: 00 shndx: 2 value: 99c size: 2be0
sym: sha256_process value: fffc9c0 addr: ffff6a8
sym: .data info: 03 other: 00 shndx: 7 value: 0 size: 0
sym: .data value: ffffd10 addr: ffff742
sym: .data info: 03 other: 00 shndx: 7 value: 0 size: 0
sym: .data value: ffffd10 addr: ffff74a
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc024 addr: ffff920
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc114 addr: ffff94c
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc160 addr: ffff980
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc4ec addr: ffff9c8
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc548 addr: ffff9e8
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc5b0 addr: ffffa1c
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc5dc addr: ffffa30
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc5fc addr: ffffa44
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc620 addr: ffffa58
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc940 addr: ffffa80
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc944 addr: ffffa94
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc948 addr: ffffaa8
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc94c addr: ffffad0
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc950 addr: ffffaf8
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: fffc9c0 addr: ffffb0c
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: ffff5a0 addr: ffffb68
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: ffff6e8 addr: ffffbbc
sym: .text info: 03 other: 00 shndx: 2 value: 0 size: 0
sym: .text value: ffff6f4 addr: ffffbd0
Modified cmdline:console=ttyS0,115200 loglevel=9 rootwait
root=/dev/mmcblk0p2 el
fcorehdr=209464K maxcpus=1
reserve regions: 4
0: offset: e3fc000, size: 4000
1: offset: c000000, size: c8f000
2: offset: fffc000, size: 4000
3: offset: f6a7000, size: 955000
debug.dtb written
kexec_load: entry = 0xfffc658 flags = 0x1
nr_segments = 6
segment[0].buf = 0xb5cb1010
segment[0].bufsz = 0xb7d568
segment[0].mem = 0xc000000
segment[0].memsz = 0xc7e000
segment[1].buf = 0x100997b0
segment[1].bufsz = 0x10000
segment[1].mem = 0xcc7e000
segment[1].memsz = 0x10000
segment[2].buf = 0x100a97f0
segment[2].bufsz = 0x400
segment[2].mem = 0xcc8e000
segment[2].memsz = 0x1000
segment[3].buf = 0x100ae670
segment[3].bufsz = 0x3c5f
segment[3].mem = 0xe3fc000
segment[3].memsz = 0x4000
segment[4].buf = 0xb6c5e050
segment[4].bufsz = 0x95409f
segment[4].mem = 0xf6a7000
segment[4].memsz = 0x955000
segment[5].buf = 0x100aa8a0
segment[5].bufsz = 0x3d6c
segment[5].mem = 0xfffc000
segment[5].memsz = 0x4000
>
> Thanks
> Christophe
^ permalink raw reply [flat|nested] 6+ messages in thread