* [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm
@ 2016-10-08 17:36 Scott Branden
2016-10-08 20:20 ` Ray Jui
0 siblings, 1 reply; 3+ messages in thread
From: Scott Branden @ 2016-10-08 17:36 UTC (permalink / raw)
To: Thierry Reding
Cc: linux-pwm, linux-kernel, BCM Kernel Feedback, Scott Branden
Enable COMPILE_TEST for broader compile coverage.
Default y for IPROC PWM driver for IPROC SoCs.
This allows you to turn it on simply by selecting CONFIG_PWM.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
drivers/pwm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 80a566a..68cd13d 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -76,7 +76,8 @@ config PWM_ATMEL_TCB
config PWM_BCM_IPROC
tristate "iProc PWM support"
- depends on ARCH_BCM_IPROC
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
help
Generic PWM framework driver for Broadcom iProc PWM block. This
block is used in Broadcom iProc SoC's.
--
2.5.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm
2016-10-08 17:36 [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm Scott Branden
@ 2016-10-08 20:20 ` Ray Jui
2016-10-08 20:49 ` Scott Branden
0 siblings, 1 reply; 3+ messages in thread
From: Ray Jui @ 2016-10-08 20:20 UTC (permalink / raw)
To: Scott Branden, Thierry Reding
Cc: linux-pwm, linux-kernel, BCM Kernel Feedback
Hi Scott,
On 10/8/2016 10:36 AM, Scott Branden wrote:
> Enable COMPILE_TEST for broader compile coverage.
> Default y for IPROC PWM driver for IPROC SoCs.
> This allows you to turn it on simply by selecting CONFIG_PWM.
>
> Signed-off-by: Scott Branden <scott.branden@broadcom.com>
> ---
> drivers/pwm/Kconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 80a566a..68cd13d 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -76,7 +76,8 @@ config PWM_ATMEL_TCB
>
> config PWM_BCM_IPROC
> tristate "iProc PWM support"
> - depends on ARCH_BCM_IPROC
> + depends on ARCH_BCM_IPROC || COMPILE_TEST
Would be nice to also add a dependency on COMMON_CLK here.
> + default ARCH_BCM_IPROC
> help
> Generic PWM framework driver for Broadcom iProc PWM block. This
> block is used in Broadcom iProc SoC's.
Thanks,
Ray
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm
2016-10-08 20:20 ` Ray Jui
@ 2016-10-08 20:49 ` Scott Branden
0 siblings, 0 replies; 3+ messages in thread
From: Scott Branden @ 2016-10-08 20:49 UTC (permalink / raw)
To: Ray Jui, Thierry Reding; +Cc: linux-pwm, linux-kernel, BCM Kernel Feedback
Hi Ray,
On 16-10-08 01:20 PM, Ray Jui wrote:
> Hi Scott,
>
> On 10/8/2016 10:36 AM, Scott Branden wrote:
>> Enable COMPILE_TEST for broader compile coverage.
>> Default y for IPROC PWM driver for IPROC SoCs.
>> This allows you to turn it on simply by selecting CONFIG_PWM.
>>
>> Signed-off-by: Scott Branden <scott.branden@broadcom.com>
>> ---
>> drivers/pwm/Kconfig | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
>> index 80a566a..68cd13d 100644
>> --- a/drivers/pwm/Kconfig
>> +++ b/drivers/pwm/Kconfig
>> @@ -76,7 +76,8 @@ config PWM_ATMEL_TCB
>> config PWM_BCM_IPROC
>> tristate "iProc PWM support"
>> - depends on ARCH_BCM_IPROC
>> + depends on ARCH_BCM_IPROC || COMPILE_TEST
> Would be nice to also add a dependency on COMMON_CLK here.
will add depends on COMMON_CLK
>
>> + default ARCH_BCM_IPROC
>> help
>> Generic PWM framework driver for Broadcom iProc PWM block. This
>> block is used in Broadcom iProc SoC's.
>
> Thanks,
>
> Ray
Regards,
Scott
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-10-08 20:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-08 17:36 [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm Scott Branden
2016-10-08 20:20 ` Ray Jui
2016-10-08 20:49 ` Scott Branden
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).