From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: James Morse <james.morse@arm.com>
Cc: x86@kernel.org, LKML <linux-kernel@vger.kernel.org>,
Fenghua Yu <fenghua.yu@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
H Peter Anvin <hpa@zytor.com>, Babu Moger <Babu.Moger@amd.com>,
shameerali.kolothum.thodi@huawei.com,
D Scott Phillips OS <scott@os.amperecomputing.com>,
carl@os.amperecomputing.com, lcherian@marvell.com,
bobo.shaobowang@huawei.com, tan.shaopeng@fujitsu.com,
xingxin.hx@openanolis.org, baolin.wang@linux.alibaba.com,
Jamie Iles <quic_jiles@quicinc.com>,
Xin Hao <xhao@linux.alibaba.com>,
peternewman@google.com
Subject: Re: [PATCH v3 02/19] x86/resctrl: Access per-rmid structures by index
Date: Tue, 21 Mar 2023 12:57:03 +0200 (EET) [thread overview]
Message-ID: <312d454-494-1ab5-6374-353a7fe24162@linux.intel.com> (raw)
In-Reply-To: <20230320172620.18254-3-james.morse@arm.com>
On Mon, 20 Mar 2023, James Morse wrote:
> Because of the differences between Intel RDT/AMD QoS and Arm's MPAM
> monitors, RMID values on arm64 are not unique unless the CLOSID is
> also included. Bitmaps like rmid_busy_llc need to be sized by the
> number of unique entries for this resource.
>
> Add helpers to encode/decode the CLOSID and RMID to an index. The
> domain's rmid_busy__llc and the rmid_ptrs[] array are then sized by
> index, as are the domain mbm_local and mbm_total arrays.
> On x86, the index is always just the RMID, so all these structures
> remain the same size.
>
> The index gives resctrl a unique value it can use to store monitor
> values, and allows MPAM to decode the closid when reading the hardware
> counters.
>
> Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> ---
> Changes since v1:
> * Added X86_BAD_CLOSID macro to make it clear what this value means
> * Added second WARN_ON() for closid checking, and made both _ONCE()
>
> Changes since v2:
> * Added RESCTRL_RESERVED_CLOSID
> * Removed a newline
> * Repharsed some comments
> * Renamed a variable 'ignore'd
> * Moved X86_RESCTRL_BAD_CLOSID to a previous patch
> ---
> diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
> index cbe986d23df6..3ca40be41a0a 100644
> @@ -732,19 +759,20 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
>
> static int dom_data_init(struct rdt_resource *r)
> {
> + u32 nr_idx = resctrl_arch_system_num_rmid_idx();
You've used idx_limit elsewhere so this name should be consistent with the
others.
--
i.
> struct rmid_entry *entry = NULL;
> - int i, nr_rmids;
> + u32 idx;
> + int i;
>
> - nr_rmids = r->num_rmid;
> - rmid_ptrs = kcalloc(nr_rmids, sizeof(struct rmid_entry), GFP_KERNEL);
> + rmid_ptrs = kcalloc(nr_idx, sizeof(struct rmid_entry), GFP_KERNEL);
> if (!rmid_ptrs)
> return -ENOMEM;
>
> - for (i = 0; i < nr_rmids; i++) {
> + for (i = 0; i < nr_idx; i++) {
> entry = &rmid_ptrs[i];
> INIT_LIST_HEAD(&entry->list);
>
> - entry->rmid = i;
> + resctrl_arch_rmid_idx_decode(i, &entry->closid, &entry->rmid);
> list_add_tail(&entry->list, &rmid_free_lru);
> }
>
> @@ -753,7 +781,8 @@ static int dom_data_init(struct rdt_resource *r)
> * default_rdtgroup control group, which will be setup later. See
> * rdtgroup_setup_root().
> */
> - entry = __rmid_entry(0, 0);
> + idx = resctrl_arch_rmid_idx_encode(RESCTRL_RESERVED_CLOSID, 0);
> + entry = __rmid_entry(idx);
> list_del(&entry->list);
>
> return 0;
next prev parent reply other threads:[~2023-03-21 10:57 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 17:26 [PATCH v3 00/19] x86/resctrl: monitored closid+rmid together, separate arch/fs locking James Morse
2023-03-20 17:26 ` [PATCH v3 01/19] x86/resctrl: Track the closid with the rmid James Morse
2023-03-20 17:26 ` [PATCH v3 02/19] x86/resctrl: Access per-rmid structures by index James Morse
2023-03-21 10:57 ` Ilpo Järvinen [this message]
2023-03-31 23:19 ` Reinette Chatre
2023-04-24 13:06 ` Peter Newman
2023-05-25 17:32 ` James Morse
2023-03-20 17:26 ` [PATCH v3 03/19] x86/resctrl: Create helper for RMID allocation and mondata dir creation James Morse
2023-03-21 11:05 ` Ilpo Järvinen
2023-03-31 23:20 ` Reinette Chatre
2023-03-20 17:26 ` [PATCH v3 04/19] x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare() James Morse
2023-03-20 17:26 ` [PATCH v3 05/19] x86/resctrl: Allow RMID allocation to be scoped by CLOSID James Morse
2023-03-21 11:29 ` Ilpo Järvinen
2023-03-20 17:26 ` [PATCH v3 06/19] x86/resctrl: Allow the allocator to check if a CLOSID can allocate clean RMID James Morse
2023-03-31 23:21 ` Reinette Chatre
2023-04-27 14:09 ` James Morse
2023-03-20 17:26 ` [PATCH v3 07/19] x86/resctrl: Move CLOSID/RMID matching and setting to use helpers James Morse
2023-03-20 17:26 ` [PATCH v3 08/19] x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow James Morse
2023-03-21 13:21 ` Ilpo Järvinen
2023-04-27 14:09 ` James Morse
2023-03-21 15:14 ` Ilpo Järvinen
2023-04-27 14:09 ` James Morse
2023-04-27 14:25 ` Ilpo Järvinen
2023-05-25 17:32 ` James Morse
2023-03-31 23:24 ` Reinette Chatre
2023-04-27 14:10 ` James Morse
2023-04-27 23:36 ` Reinette Chatre
2023-05-25 17:32 ` James Morse
2023-03-20 17:26 ` [PATCH v3 09/19] x86/resctrl: Queue mon_event_read() instead of sending an IPI James Morse
2023-03-22 14:07 ` Peter Newman
2023-03-23 9:09 ` Peter Newman
2023-04-27 14:12 ` James Morse
2023-04-27 14:11 ` James Morse
2023-03-31 23:25 ` Reinette Chatre
2023-04-27 14:12 ` James Morse
2023-03-20 17:26 ` [PATCH v3 10/19] x86/resctrl: Allow resctrl_arch_rmid_read() to sleep James Morse
2023-03-31 23:26 ` Reinette Chatre
2023-04-27 14:12 ` James Morse
2023-03-20 17:26 ` [PATCH v3 11/19] x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read() James Morse
2023-03-31 23:27 ` Reinette Chatre
2023-04-27 14:19 ` James Morse
2023-04-27 23:40 ` Reinette Chatre
2023-05-25 17:31 ` James Morse
2023-03-20 17:26 ` [PATCH v3 12/19] x86/resctrl: Make resctrl_mounted checks explicit James Morse
2023-03-31 23:28 ` Reinette Chatre
2023-04-27 14:19 ` James Morse
2023-04-27 23:37 ` Reinette Chatre
2023-05-25 17:31 ` James Morse
2023-03-20 17:26 ` [PATCH v3 13/19] x86/resctrl: Move alloc/mon static keys into helpers James Morse
2023-03-20 17:26 ` [PATCH v3 14/19] x86/resctrl: Make rdt_enable_key the arch's decision to switch James Morse
2023-03-20 17:26 ` [PATCH v3 15/19] x86/resctrl: Add helpers for system wide mon/alloc capable James Morse
2023-03-31 23:29 ` Reinette Chatre
2023-04-27 14:19 ` James Morse
2023-03-20 17:26 ` [PATCH v3 16/19] x86/resctrl: Add cpu online callback for resctrl work James Morse
2023-03-31 23:29 ` Reinette Chatre
2023-03-20 17:26 ` [PATCH v3 17/19] x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but cpu James Morse
2023-03-21 15:12 ` Ilpo Järvinen
2023-03-21 15:25 ` Ilpo Järvinen
2023-04-27 14:20 ` James Morse
2023-03-20 17:26 ` [PATCH v3 18/19] x86/resctrl: Add cpu offline callback for resctrl work James Morse
2023-03-21 15:32 ` Ilpo Järvinen
2023-04-27 14:20 ` James Morse
2023-04-27 14:51 ` Ilpo Järvinen
2023-04-05 23:48 ` Reinette Chatre
2023-04-27 14:20 ` James Morse
2023-03-20 17:26 ` [PATCH v3 19/19] x86/resctrl: Separate arch and fs resctrl locks James Morse
2023-05-23 17:14 ` [PATCH v3 00/19] x86/resctrl: monitored closid+rmid together, separate arch/fs locking Tony Luck
2023-05-25 17:31 ` James Morse
2023-05-25 21:00 ` Tony Luck
2023-05-28 20:52 ` Drew Fustini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=312d454-494-1ab5-6374-353a7fe24162@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Babu.Moger@amd.com \
--cc=baolin.wang@linux.alibaba.com \
--cc=bobo.shaobowang@huawei.com \
--cc=bp@alien8.de \
--cc=carl@os.amperecomputing.com \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=james.morse@arm.com \
--cc=lcherian@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peternewman@google.com \
--cc=quic_jiles@quicinc.com \
--cc=reinette.chatre@intel.com \
--cc=scott@os.amperecomputing.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=tan.shaopeng@fujitsu.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=xhao@linux.alibaba.com \
--cc=xingxin.hx@openanolis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).