[GIT PULL] extcon next for 5.19

[GIT PULL] extcon next for 5.19

[Chanwoo Choi]

Dear Greg,

This is extcon-next pull request for v5.19. I add detailed description of
this pull request on below. Please pull extcon with following updates.

Best Regards,
Chanwoo Choi

The following changes since commit 672c0c5173427e6b3e2a9bbb7be51ceeec78093a:

  Linux 5.18-rc5 (2022-05-01 13:57:58 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-5.19

for you to fetch changes up to 5dcc2afe716d69f5112ce035cb14f007461ff189:

  extcon: Modify extcon device to be created after driver data is set (2022-05-13 17:03:41 +0900)

----------------------------------------------------------------
Update extcon next for v5.19

Detailed description for this pull request:
1. update extcon core driver
- extcon_get_extcon_dev() has been almost used to get the extcon device
on booting time. If extcon provider driver is probed at late time,
the extcon consumer driver get the -EPROBE_DEFER return value.
It requires the inefficient handling code of -EPROBE_DEFER.
Instead, extcon_get_extcon_dev() will return -EPROBE_DEFER
if the required extcon device is none. It makes the extcon consumer driver
to be simplified when getting extcon device.

- Register device after dev_set_drvdata because of accessing
the sysfs attributes at timing of between drv_set_data and device_register.

- Fix some kernel-doc comments of extcon functions.

2. update extcon provider driver
- Update extcon-intel-int3496.c
: Add support for controlling vbus power via regulator and support
to the extcon-intel-int3496.c driver to bind to devices without
an ACPi companion. And fix the minor clean-up.

- Use struct_size() helper on extcon-usbc-cros-ec.c

- Remove the disable irq operation in system sleep for using vbus/id
gpio as the wakeup source on extcon-usb-gpio.c

- Add support of SM5703 device by using existing extcon-sm5502.c
and rename i2c_devic_id from sm5703 to sm5703-muic to reduce confusion
between SM5703 MFD device and extcon device.

- Add usb role class support and add queue work sync before driver release
on extcon-ptn5150.c
----------------------------------------------------------------

Bruce Chen (1):
      extcon: usb-gpio: Remove disable irq operation in system sleep

Dan Carpenter (1):
      extcon: Fix extcon_get_extcon_dev() error handling

Gustavo A. R. Silva (1):
      extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()

Hans de Goede (4):
      extcon: int3496: Make the driver a bit less verbose
      extcon: int3496: Request non-exclusive access to the ID GPIO
      extcon: int3496: Add support for binding to plain platform devices
      extcon: int3496: Add support for controlling Vbus through a regulator

Li Jun (2):
      extcon: ptn5150: Add queue work sync before driver release
      extcon: ptn5150: Add usb role class support

Markuss Broks (3):
      dt-bindings: extcon: bindings for SM5703
      extcon: sm5502: Add support for SM5703
      extcon: sm5502: Clarify SM5703's i2c device ID

Yang Li (1):
      extcon: Fix some kernel-doc comments

bumwoo lee (1):
      extcon: Modify extcon device to be created after driver data is set

 .../bindings/extcon/siliconmitus,sm5502-muic.yaml  |  5 +-
 drivers/extcon/Kconfig                             |  3 +-
 drivers/extcon/extcon-axp288.c                     |  4 +-
 drivers/extcon/extcon-intel-int3496.c              | 54 ++++++++++++++++++----
 drivers/extcon/extcon-ptn5150.c                    | 36 +++++++++++++++
 drivers/extcon/extcon-sm5502.c                     |  2 +
 drivers/extcon/extcon-usb-gpio.c                   | 15 ------
 drivers/extcon/extcon-usbc-cros-ec.c               |  2 +-
 drivers/extcon/extcon.c                            | 37 +++++++++------
 drivers/power/supply/axp288_charger.c              | 17 ++++---
 drivers/power/supply/charger-manager.c             |  7 +--
 drivers/power/supply/max8997_charger.c             |  8 ++--
 drivers/usb/dwc3/drd.c                             |  9 +---
 drivers/usb/phy/phy-omap-otg.c                     |  4 +-
 drivers/usb/typec/tcpm/fusb302.c                   |  4 +-
 include/linux/extcon.h                             |  2 +-
 16 files changed, 139 insertions(+), 70 deletions(-)

Re: [GIT PULL] extcon next for 5.19

[Chanwoo Choi]

Dear Greg,

Gently ping. Could you please pull this request?

Best Regards,
Chanwoo Choi

On 22. 5. 13. 18:09, Chanwoo Choi wrote:
> Dear Greg,
> 
> This is extcon-next pull request for v5.19. I add detailed description of
> this pull request on below. Please pull extcon with following updates.
> 
> Best Regards,
> Chanwoo Choi
> 
> The following changes since commit 672c0c5173427e6b3e2a9bbb7be51ceeec78093a:
> 
>   Linux 5.18-rc5 (2022-05-01 13:57:58 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-5.19
> 
> for you to fetch changes up to 5dcc2afe716d69f5112ce035cb14f007461ff189:
> 
>   extcon: Modify extcon device to be created after driver data is set (2022-05-13 17:03:41 +0900)
> 
> ----------------------------------------------------------------
> Update extcon next for v5.19
> 
> Detailed description for this pull request:
> 1. update extcon core driver
> - extcon_get_extcon_dev() has been almost used to get the extcon device
> on booting time. If extcon provider driver is probed at late time,
> the extcon consumer driver get the -EPROBE_DEFER return value.
> It requires the inefficient handling code of -EPROBE_DEFER.
> Instead, extcon_get_extcon_dev() will return -EPROBE_DEFER
> if the required extcon device is none. It makes the extcon consumer driver
> to be simplified when getting extcon device.
> 
> - Register device after dev_set_drvdata because of accessing
> the sysfs attributes at timing of between drv_set_data and device_register.
> 
> - Fix some kernel-doc comments of extcon functions.
> 
> 2. update extcon provider driver
> - Update extcon-intel-int3496.c
> : Add support for controlling vbus power via regulator and support
> to the extcon-intel-int3496.c driver to bind to devices without
> an ACPi companion. And fix the minor clean-up.
> 
> - Use struct_size() helper on extcon-usbc-cros-ec.c
> 
> - Remove the disable irq operation in system sleep for using vbus/id
> gpio as the wakeup source on extcon-usb-gpio.c
> 
> - Add support of SM5703 device by using existing extcon-sm5502.c
> and rename i2c_devic_id from sm5703 to sm5703-muic to reduce confusion
> between SM5703 MFD device and extcon device.
> 
> - Add usb role class support and add queue work sync before driver release
> on extcon-ptn5150.c
> ----------------------------------------------------------------
> 
> Bruce Chen (1):
>       extcon: usb-gpio: Remove disable irq operation in system sleep
> 
> Dan Carpenter (1):
>       extcon: Fix extcon_get_extcon_dev() error handling
> 
> Gustavo A. R. Silva (1):
>       extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()
> 
> Hans de Goede (4):
>       extcon: int3496: Make the driver a bit less verbose
>       extcon: int3496: Request non-exclusive access to the ID GPIO
>       extcon: int3496: Add support for binding to plain platform devices
>       extcon: int3496: Add support for controlling Vbus through a regulator
> 
> Li Jun (2):
>       extcon: ptn5150: Add queue work sync before driver release
>       extcon: ptn5150: Add usb role class support
> 
> Markuss Broks (3):
>       dt-bindings: extcon: bindings for SM5703
>       extcon: sm5502: Add support for SM5703
>       extcon: sm5502: Clarify SM5703's i2c device ID
> 
> Yang Li (1):
>       extcon: Fix some kernel-doc comments
> 
> bumwoo lee (1):
>       extcon: Modify extcon device to be created after driver data is set
> 
>  .../bindings/extcon/siliconmitus,sm5502-muic.yaml  |  5 +-
>  drivers/extcon/Kconfig                             |  3 +-
>  drivers/extcon/extcon-axp288.c                     |  4 +-
>  drivers/extcon/extcon-intel-int3496.c              | 54 ++++++++++++++++++----
>  drivers/extcon/extcon-ptn5150.c                    | 36 +++++++++++++++
>  drivers/extcon/extcon-sm5502.c                     |  2 +
>  drivers/extcon/extcon-usb-gpio.c                   | 15 ------
>  drivers/extcon/extcon-usbc-cros-ec.c               |  2 +-
>  drivers/extcon/extcon.c                            | 37 +++++++++------
>  drivers/power/supply/axp288_charger.c              | 17 ++++---
>  drivers/power/supply/charger-manager.c             |  7 +--
>  drivers/power/supply/max8997_charger.c             |  8 ++--
>  drivers/usb/dwc3/drd.c                             |  9 +---
>  drivers/usb/phy/phy-omap-otg.c                     |  4 +-
>  drivers/usb/typec/tcpm/fusb302.c                   |  4 +-
>  include/linux/extcon.h                             |  2 +-
>  16 files changed, 139 insertions(+), 70 deletions(-)


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: [GIT PULL] extcon next for 5.19

[Greg Kroah-Hartman]

On Wed, May 18, 2022 at 03:03:48AM +0900, Chanwoo Choi wrote:
> Dear Greg,
> 
> Gently ping. Could you please pull this request?

Sorry, was behind in patches, catching up now...

Re: [GIT PULL] extcon next for 5.19

[Greg Kroah-Hartman]

On Fri, May 13, 2022 at 06:09:53PM +0900, Chanwoo Choi wrote:
> Dear Greg,
> 
> This is extcon-next pull request for v5.19. I add detailed description of
> this pull request on below. Please pull extcon with following updates.
> 
> Best Regards,
> Chanwoo Choi
> 
> The following changes since commit 672c0c5173427e6b3e2a9bbb7be51ceeec78093a:
> 
>   Linux 5.18-rc5 (2022-05-01 13:57:58 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-5.19

Pulled and pushed out,t hanks.

greg k-h

Re: [GIT PULL] extcon next for 5.19

[Chanwoo Choi]

On 5/19/22 11:56 PM, Greg Kroah-Hartman wrote:
> On Wed, May 18, 2022 at 03:03:48AM +0900, Chanwoo Choi wrote:
>> Dear Greg,
>>
>> Gently ping. Could you please pull this request?
> 
> Sorry, was behind in patches, catching up now...
> 

You're welcome. I'll send the pull request more early on next.
Thank you

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics