* USB / PCMCIA not working/panic on AVERATEC 3500
@ 2005-01-31 4:09 Michaela Merz
2005-02-09 21:17 ` Dominik Brodowski
0 siblings, 1 reply; 2+ messages in thread
From: Michaela Merz @ 2005-01-31 4:09 UTC (permalink / raw)
To: linux-kernel
Hey :)
Linux dhcp219.us.steyla.com 2.6.9 #2 Sat Jan 29 17:26:47 EST 2005 i686
athlon i386 GNU/Linux
Gnu C 3.4.2
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12a
mount 2.12a
module-init-tools 3.1-pre5
e2fsprogs 1.35
reiserfsprogs line
reiser4progs line
pcmcia-cs 3.2.7
quota-tools 3.12.
PPP 2.4.2
isdn4k-utils 3.3
nfs-utils 1.0.6
Linux C Library 2.3.3
Dynamic linker (ldd) 2.3.3
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 039
Modules Loaded parport_pc lp parport autofs4 sunrpc ds dm_mod
button battery ac md5 ipv6 yenta_socket pcmcia_core ohci_hcd ehci_hcd
snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss
snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi
snd_seq_device snd soundcore rt2500 sis900 ext3 jbd
Tried 2.6.9, 2.6.10 and 2.6.11-rc2
dmesg output:
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:03.2[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: illegal capability!
ehci_hcd 0000:00:03.2: can't reset
ehci_hcd 0000:00:03.2: init 0000:00:03.2 fail, -110
ehci_hcd: probe of 0000:00:03.2 failed with error -110
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: USB HC reset timed out!
ohci_hcd 0000:00:03.0: can't reset
ohci_hcd 0000:00:03.0: init 0000:00:03.0 fail, -1
ohci_hcd: probe of 0000:00:03.0 failed with error -1
PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:03.1 to 64
ohci_hcd 0000:00:03.1: irq 11, pci mem de8c8000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.1: init err
ohci_hcd 0000:00:03.1: can't start
ohci_hcd 0000:00:03.1: init error -16
ohci_hcd 0000:00:03.1: remove, state 0
ohci_hcd 0000:00:03.1: USB bus 1 deregistered
ohci_hcd: probe of 0000:00:03.1 failed with error -16
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 7 (level, low) -> IRQ 7
Yenta: CardBus bridge found at 0000:00:0c.0 [1524:1410]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44
Yenta TI: socket 0000:00:0c.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: 00000720
I tried pci=routeirq and noacpi to no avail. Modules or compiled
into kernel does not change anything.
2.6.11-rc2 actually panics while initializing.
cat /proc/modules
parport_pc 27328 1 - Live 0xdea6d000
lp 12652 0 - Live 0xde931000
parport 46920 2 parport_pc,lp, Live 0xdea36000
autofs4 28292 0 - Live 0xde929000
sunrpc 184420 1 - Live 0xde94e000
ds 19204 2 - Live 0xde91f000
dm_mod 62484 0 - Live 0xde90e000
button 6928 0 - Live 0xde926000
battery 9220 0 - Live 0xde8f6000
ac 5124 0 - Live 0xde874000
md5 4608 1 - Live 0xde8ed000
ipv6 272320 8 - Live 0xde992000
yenta_socket 20864 0 - Live 0xde8e6000
pcmcia_core 67396 2 ds,yenta_socket, Live 0xde8d4000
ohci_hcd 25732 0 - Live 0xde8fb000
ehci_hcd 37380 0 - Live 0xde903000
snd_intel8x0m 20168 2 - Live 0xde87b000
snd_intel8x0 38348 2 - Live 0xde8bd000
snd_ac97_codec 72528 2 snd_intel8x0m,snd_intel8x0, Live 0xde93b000
snd_pcm_oss 55464 0 - Live 0xde983000
snd_mixer_oss 19840 3 snd_pcm_oss, Live 0xde86e000
snd_pcm 114568 3 snd_intel8x0m,snd_intel8x0,snd_pcm_oss, Live 0xde8a0000
snd_timer 34820 1 snd_pcm, Live 0xde8ca000
snd_page_alloc 10504 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xde86a000
gameport 5376 1 snd_intel8x0, Live 0xde843000
snd_mpu401_uart 10368 1 snd_intel8x0, Live 0xde866000
snd_rawmidi 30116 1 snd_mpu401_uart, Live 0xde85d000
snd_seq_device 8840 1 snd_rawmidi, Live 0xde877000
snd 60260 14
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device,
Live 0xde833000
soundcore 11360 3 snd, Live 0xde804000
rt2500 185156 1 - Live 0xdea7d000
sis900 21124 0 - Live 0xde829000
ext3 120680 1 - Live 0xde881000
jbd 89880 1 ext3, Live 0xde846000
cat /proc/devices
1 mem
4 /dev/vc/0
4 tty
4 ttyS
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
10 misc
13 input
14 sound
29 fb
36 netlink
116 alsa
128 ptm
136 pts
180 usb
254 pcmcia
Block devices:
1 ramdisk
3 ide0
9 md
22 ide1
253 device-mapper
254 mdp
/cat/proc/bus/pci
[root@dhcp219 log]# cat /proc/bus/pci/devices
0000 10390741 0 f0000000 00000000 00000000
00000000 00000000 00000000 00000000 02000000
000000000000000 00000000 00000000 00000000 00000000
agpgart-sis
0008 10390003 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
000000000000000 00000000 00000000 00000000 00000000
0010 10390963 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
000000000000000 00000000 00000000 00000000 00000000
0011 10390016 b 00000000 00000000 00000000
00000000 00001401 00000000 00000000 00000000
000000000000000 00000000 00000020 00000000 00000000
0015 10395513 0 00000000 00000000 00000000
00000000 00001101 00000000 00000000 00000000
000000000000000 00000000 00000010 00000000 00000000
SIS_IDE
0016 10397013 b 0000e001 0000e101 00000000
00000000 00000000 00000000 00000000 00000100
000000800000000 00000000 00000000 00000000 00000000
Intel ICH Modem
0017 10397012 b 0000e201 0000e301 00000000
00000000 00000000 00000000 00000000 00000100
000000800000000 00000000 00000000 00000000 00000000
Intel ICH
0018 10397001 b 1e000000 00000000 00000000
00000000 00000000 00000000 00000000 00001000
000000000000000 00000000 00000000 00000000 00000000
0019 10397001 b 1e001000 00000000 00000000
00000000 00000000 00000000 00000000 00001000
000000000000000 00000000 00000000 00000000 00000000
001a 10397002 b 1e002000 00000000 00000000
00000000 00000000 00000000 00000000 00001000
000000000000000 00000000 00000000 00000000 00000000
0020 10390900 7 0000e401 f2000000 00000000
00000000 00000000 00000000 00000000 00000100
000010000000000 00000000 00000000 00000000 00020000
sis900
0038 18140201 b f2002000 00000000 00000000
00000000 00000000 00000000 00000000 00002000
000000000000000 00000000 00000000 00000000 00000000
rt2500
0060 15241410 7 1e003000 00000000 00000000
00000000 00000000 00000000 00000000 00001000
000000000000000 00000000 00000000 00000000 00000000
yenta_cardbus
0100 10396330 a a0000008 e0000000 0000c001
00000000 00000000 00000000 00000000 08000000
000200000000080 00000000 00000000 00000000 00000000
/proc/bus/usb is empty
/proc/bus/pccard/drivers is empty
Any help is appreciated.
Michaela
--
Steyla Technologies, Inc.
www.radiogermany.us
POT: +386-439-2286
FAX: +386-439-8521
FWD: 525452 (www.freeworlddialup.com)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: USB / PCMCIA not working/panic on AVERATEC 3500
2005-01-31 4:09 USB / PCMCIA not working/panic on AVERATEC 3500 Michaela Merz
@ 2005-02-09 21:17 ` Dominik Brodowski
0 siblings, 0 replies; 2+ messages in thread
From: Dominik Brodowski @ 2005-02-09 21:17 UTC (permalink / raw)
To: Michaela Merz; +Cc: linux-kernel
Hi,
> Socket status: 00000720
This looks strange. Socket status 00000720 can't really be true -- I assume
there is a problem with the resource allocation. Can you send me
/proc/iomem
/proc/ioport
please?
Thanks,
Dominik
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-02-09 21:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-01-31 4:09 USB / PCMCIA not working/panic on AVERATEC 3500 Michaela Merz
2005-02-09 21:17 ` Dominik Brodowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).