* [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports @ 2017-12-02 0:27 Bjorn Helgaas 2017-12-02 19:18 ` Bjorn Helgaas 0 siblings, 1 reply; 5+ messages in thread From: Bjorn Helgaas @ 2017-12-02 0:27 UTC (permalink / raw) To: linux-pci Cc: Michael Ellerman, linuxppc-dev, linux-kernel, Christian Zigotzky From: Bjorn Helgaas <bhelgaas@google.com> PCIe Downstream Ports normally have only a Device 0 below them. To optimize enumeration, we don't scan for other devices *unless* the PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the "pci=pcie_scan_all" kernel parameter. Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch Downstream Ports, not Root Ports. But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a PCIe device, of course, but the SB600 contains only conventional PCI devices with no visible PCIe port. Simplify and restructure only_one_child() so that we scan for all possible devices below Root Ports as well as Switch Downstream Ports when PCI_SCAN_ALL_PCIE_DEVS is set. This is enough to make Nemo work with "pci=pcie_scan_all". We would also like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't have that yet. Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057 Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> --- drivers/pci/probe.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 14e0ea1ff38b..303c0cb0550c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2215,22 +2215,27 @@ static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn) static int only_one_child(struct pci_bus *bus) { - struct pci_dev *parent = bus->self; + struct pci_dev *bridge = bus->self; - if (!parent || !pci_is_pcie(parent)) + /* + * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so + * we scan for all possible devices, not just Device 0. + */ + if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) return 0; - if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT) - return 1; /* - * PCIe downstream ports are bridges that normally lead to only a - * device 0, but if PCI_SCAN_ALL_PCIE_DEVS is set, scan all - * possible devices, not just device 0. See PCIe spec r3.0, - * sec 7.3.1. + * A PCIe Downstream Port normally leads to a Link with only Device + * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan + * only for Device 0 in that situation. + * + * Checking has_secondary_link is a hack to identify Downstream + * Ports because sometimes Switches are configured such that the + * PCIe Port Type labels are backwards. */ - if (parent->has_secondary_link && - !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) + if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link) return 1; + return 0; } ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports 2017-12-02 0:27 [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports Bjorn Helgaas @ 2017-12-02 19:18 ` Bjorn Helgaas 2017-12-04 4:44 ` Michael Ellerman 2018-02-10 8:05 ` Christian Zigotzky 0 siblings, 2 replies; 5+ messages in thread From: Bjorn Helgaas @ 2017-12-02 19:18 UTC (permalink / raw) To: linux-pci Cc: Michael Ellerman, linuxppc-dev, linux-kernel, Christian Zigotzky On Fri, Dec 01, 2017 at 06:27:10PM -0600, Bjorn Helgaas wrote: > From: Bjorn Helgaas <bhelgaas@google.com> > > PCIe Downstream Ports normally have only a Device 0 below them. To > optimize enumeration, we don't scan for other devices *unless* the > PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the > "pci=pcie_scan_all" kernel parameter. > > Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch > Downstream Ports, not Root Ports. > > But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root > Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a > PCIe device, of course, but the SB600 contains only conventional PCI > devices with no visible PCIe port. > > Simplify and restructure only_one_child() so that we scan for all possible > devices below Root Ports as well as Switch Downstream Ports when > PCI_SCAN_ALL_PCIE_DEVS is set. > > This is enough to make Nemo work with "pci=pcie_scan_all". We would also > like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so > users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't > have that yet. > > Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com > Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057 > Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Applied to pci/enumeration for v4.16. > --- > drivers/pci/probe.c | 25 +++++++++++++++---------- > 1 file changed, 15 insertions(+), 10 deletions(-) > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 14e0ea1ff38b..303c0cb0550c 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -2215,22 +2215,27 @@ static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn) > > static int only_one_child(struct pci_bus *bus) > { > - struct pci_dev *parent = bus->self; > + struct pci_dev *bridge = bus->self; > > - if (!parent || !pci_is_pcie(parent)) > + /* > + * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so > + * we scan for all possible devices, not just Device 0. > + */ > + if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) > return 0; > - if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT) > - return 1; > > /* > - * PCIe downstream ports are bridges that normally lead to only a > - * device 0, but if PCI_SCAN_ALL_PCIE_DEVS is set, scan all > - * possible devices, not just device 0. See PCIe spec r3.0, > - * sec 7.3.1. > + * A PCIe Downstream Port normally leads to a Link with only Device > + * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan > + * only for Device 0 in that situation. > + * > + * Checking has_secondary_link is a hack to identify Downstream > + * Ports because sometimes Switches are configured such that the > + * PCIe Port Type labels are backwards. > */ > - if (parent->has_secondary_link && > - !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) > + if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link) > return 1; > + > return 0; > } > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports 2017-12-02 19:18 ` Bjorn Helgaas @ 2017-12-04 4:44 ` Michael Ellerman 2018-02-10 8:05 ` Christian Zigotzky 1 sibling, 0 replies; 5+ messages in thread From: Michael Ellerman @ 2017-12-04 4:44 UTC (permalink / raw) To: Bjorn Helgaas, linux-pci; +Cc: linuxppc-dev, linux-kernel, Christian Zigotzky Bjorn Helgaas <helgaas@kernel.org> writes: > On Fri, Dec 01, 2017 at 06:27:10PM -0600, Bjorn Helgaas wrote: >> From: Bjorn Helgaas <bhelgaas@google.com> >> >> PCIe Downstream Ports normally have only a Device 0 below them. To >> optimize enumeration, we don't scan for other devices *unless* the >> PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the >> "pci=pcie_scan_all" kernel parameter. >> >> Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch >> Downstream Ports, not Root Ports. >> >> But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root >> Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a >> PCIe device, of course, but the SB600 contains only conventional PCI >> devices with no visible PCIe port. >> >> Simplify and restructure only_one_child() so that we scan for all possible >> devices below Root Ports as well as Switch Downstream Ports when >> PCI_SCAN_ALL_PCIE_DEVS is set. >> >> This is enough to make Nemo work with "pci=pcie_scan_all". We would also >> like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so >> users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't >> have that yet. >> >> Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com >> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057 >> Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> >> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > > Applied to pci/enumeration for v4.16. Thanks Bjorn. cheers ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports 2017-12-02 19:18 ` Bjorn Helgaas 2017-12-04 4:44 ` Michael Ellerman @ 2018-02-10 8:05 ` Christian Zigotzky 2018-02-10 15:43 ` Bjorn Helgaas 1 sibling, 1 reply; 5+ messages in thread From: Christian Zigotzky @ 2018-02-10 8:05 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: linux-pci, Michael Ellerman, linuxppc-dev, linux-kernel Hi All, The AmigaOne X1000 doesn’t boot anymore since the PCI updates. I have seen, that the PCI updates are different to the updates below. The code below works but the latest not. Is there a problem with the latest PCI updates currently? Thanks, Christian Sent from my iPhone On 2. Dec 2017, at 20:18, Bjorn Helgaas <helgaas@kernel.org> wrote: On Fri, Dec 01, 2017 at 06:27:10PM -0600, Bjorn Helgaas wrote: From: Bjorn Helgaas <bhelgaas@google.com> PCIe Downstream Ports normally have only a Device 0 below them. To optimize enumeration, we don't scan for other devices *unless* the PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the "pci=pcie_scan_all" kernel parameter. Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch Downstream Ports, not Root Ports. But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a PCIe device, of course, but the SB600 contains only conventional PCI devices with no visible PCIe port. Simplify and restructure only_one_child() so that we scan for all possible devices below Root Ports as well as Switch Downstream Ports when PCI_SCAN_ALL_PCIE_DEVS is set. This is enough to make Nemo work with "pci=pcie_scan_all". We would also like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't have that yet. Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057 Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Applied to pci/enumeration for v4.16. --- drivers/pci/probe.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 14e0ea1ff38b..303c0cb0550c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2215,22 +2215,27 @@ static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn) static int only_one_child(struct pci_bus *bus) { - struct pci_dev *parent = bus->self; + struct pci_dev *bridge = bus->self; - if (!parent || !pci_is_pcie(parent)) + /* + * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so + * we scan for all possible devices, not just Device 0. + */ + if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) return 0; - if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT) - return 1; /* - * PCIe downstream ports are bridges that normally lead to only a - * device 0, but if PCI_SCAN_ALL_PCIE_DEVS is set, scan all - * possible devices, not just device 0. See PCIe spec r3.0, - * sec 7.3.1. + * A PCIe Downstream Port normally leads to a Link with only Device + * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan + * only for Device 0 in that situation. + * + * Checking has_secondary_link is a hack to identify Downstream + * Ports because sometimes Switches are configured such that the + * PCIe Port Type labels are backwards. */ - if (parent->has_secondary_link && - !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) + if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link) return 1; + return 0; } ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports 2018-02-10 8:05 ` Christian Zigotzky @ 2018-02-10 15:43 ` Bjorn Helgaas 0 siblings, 0 replies; 5+ messages in thread From: Bjorn Helgaas @ 2018-02-10 15:43 UTC (permalink / raw) To: Christian Zigotzky Cc: linux-pci, Michael Ellerman, linuxppc-dev, linux-kernel On Sat, Feb 10, 2018 at 09:05:40AM +0100, Christian Zigotzky wrote: > Hi All, > > The AmigaOne X1000 doesn’t boot anymore since the PCI updates. I > have seen, that the PCI updates are different to the updates below. > The code below works but the latest not. Is there a problem with the > latest PCI updates currently? I'm not aware of a problem, and it *looks* like the patch below is in Linus' tree (I'm looking at 9a61df9e5f74 ("Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild")). I assume you're still booting with "pci=pcie_scan_all", since I don't think we ever got a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically. If AmigaOne X1000 doesn't boot with "pci=pcie_scan_all", can you diff the working only_one_child() with the current upstream? I compared the version in my pci/enumeration branch with what's upstream, and they're identical. So maybe the original patch I applied was wrong? If you have a patch that works, can you post it and maybe I can sort out what's different? > On 2. Dec 2017, at 20:18, Bjorn Helgaas <helgaas@kernel.org> wrote: > > On Fri, Dec 01, 2017 at 06:27:10PM -0600, Bjorn Helgaas wrote: > From: Bjorn Helgaas <bhelgaas@google.com> > > PCIe Downstream Ports normally have only a Device 0 below them. To > optimize enumeration, we don't scan for other devices *unless* the > PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the > "pci=pcie_scan_all" kernel parameter. > > Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch > Downstream Ports, not Root Ports. > > But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root > Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a > PCIe device, of course, but the SB600 contains only conventional PCI > devices with no visible PCIe port. > > Simplify and restructure only_one_child() so that we scan for all possible > devices below Root Ports as well as Switch Downstream Ports when > PCI_SCAN_ALL_PCIE_DEVS is set. > > This is enough to make Nemo work with "pci=pcie_scan_all". We would also > like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so > users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't > have that yet. > > Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com > Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057 > Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > > Applied to pci/enumeration for v4.16. > > --- > drivers/pci/probe.c | 25 +++++++++++++++---------- > 1 file changed, 15 insertions(+), 10 deletions(-) > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 14e0ea1ff38b..303c0cb0550c 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -2215,22 +2215,27 @@ static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn) > > static int only_one_child(struct pci_bus *bus) > { > - struct pci_dev *parent = bus->self; > + struct pci_dev *bridge = bus->self; > > - if (!parent || !pci_is_pcie(parent)) > + /* > + * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so > + * we scan for all possible devices, not just Device 0. > + */ > + if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) > return 0; > - if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT) > - return 1; > > /* > - * PCIe downstream ports are bridges that normally lead to only a > - * device 0, but if PCI_SCAN_ALL_PCIE_DEVS is set, scan all > - * possible devices, not just device 0. See PCIe spec r3.0, > - * sec 7.3.1. > + * A PCIe Downstream Port normally leads to a Link with only Device > + * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan > + * only for Device 0 in that situation. > + * > + * Checking has_secondary_link is a hack to identify Downstream > + * Ports because sometimes Switches are configured such that the > + * PCIe Port Type labels are backwards. > */ > - if (parent->has_secondary_link && > - !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) > + if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link) > return 1; > + > return 0; > } > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-02-10 15:43 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-12-02 0:27 [PATCH v1] PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports Bjorn Helgaas 2017-12-02 19:18 ` Bjorn Helgaas 2017-12-04 4:44 ` Michael Ellerman 2018-02-10 8:05 ` Christian Zigotzky 2018-02-10 15:43 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).