Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller

[Kishon Vijay Abraham I <kishon@ti.com>]

Hi,

On Tuesday 29 August 2017 10:41 PM, Rob Herring wrote:
> On Wed, Aug 23, 2017 at 11:12:46AM +0530, Kishon Vijay Abraham I wrote:
>> Add binding for the TI's sdhci-omap controller. This now includes only
>> a subset of properties documented in ti-omap-hsmmc.txt but will eventually
>> include all the properties.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> Changes from v2:
>> *) Fixed example to use the updated compatible
>>
>> Changes from v1:
>> *) Create a new sdhci-omap.txt document for TI's sdhci-omap controller instead
>>    of using the ti-omap-hsmmc.txt as suggested by Tony
>>  .../devicetree/bindings/mmc/sdhci-omap.txt         | 22 ++++++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>> new file mode 100644
>> index 000000000000..139695ad2d58
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>> @@ -0,0 +1,22 @@
>> +* TI OMAP SDHCI Controller
>> +
>> +Refer to mmc.txt for standard MMC bindings.
>> +
>> +Required properties:
>> +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
>> +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
>> +
>> +Optional properties:
>> +- ti,dual-volt: boolean, supports dual voltage cards
>> +- ti,non-removable: non-removable slot (like eMMC)
> 
> Well, if you are doing a new compatible, then why aren't you using 
> common properties?

yeah, now moved to generic bindings.
> 
>> +
>> +Example:
>> +	mmc1: mmc@0x4809c000 {
> 
> Drop the '0x'.

sure, will fix it.

Thanks
Kishon