Re: [PATCH v1 10/14] mtd: spi-nor: micron-st: rename vendor specific functions and defines

[<Tudor.Ambarus@microchip.com>]

On 2/2/22 16:58, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Drop the generic spi_nor prefix for all the micron-st functions.

please, no.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  drivers/mtd/spi-nor/micron-st.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
> index ca368b48bcb0..988ecbffdc36 100644
> --- a/drivers/mtd/spi-nor/micron-st.c
> +++ b/drivers/mtd/spi-nor/micron-st.c
> @@ -308,7 +308,7 @@ static int micron_st_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
>  }
> 
>  /**
> - * spi_nor_read_fsr() - Read the Flag Status Register.
> + * micron_st_read_fsr() - Read the Flag Status Register.
>   * @nor:       pointer to 'struct spi_nor'
>   * @fsr:       pointer to a DMA-able buffer where the value of the
>   *              Flag Status Register will be written. Should be at least 2
> @@ -316,7 +316,7 @@ static int micron_st_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
>   *
>   * Return: 0 on success, -errno otherwise.
>   */
> -static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
> +static int micron_st_read_fsr(struct spi_nor *nor, u8 *fsr)
>  {
>         int ret;
> 
> @@ -352,10 +352,10 @@ static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
>  }
> 
>  /**
> - * spi_nor_clear_fsr() - Clear the Flag Status Register.
> + * micron_st_clear_fsr() - Clear the Flag Status Register.
>   * @nor:       pointer to 'struct spi_nor'.
>   */
> -static void spi_nor_clear_fsr(struct spi_nor *nor)
> +static void micron_st_clear_fsr(struct spi_nor *nor)
>  {
>         int ret;
> 
> @@ -379,13 +379,13 @@ static void spi_nor_clear_fsr(struct spi_nor *nor)
>  }
> 
>  /**
> - * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
> + * micron_st_fsr_ready() - Query the Flag Status Register to see if the flash is
>   * ready for new commands.
>   * @nor:       pointer to 'struct spi_nor'.
>   *
>   * Return: 1 if ready, 0 if not ready, -errno on errors.
>   */
> -static int spi_nor_fsr_ready(struct spi_nor *nor)
> +static int micron_st_fsr_ready(struct spi_nor *nor)
>  {
>         int sr_ready, ret;
> 
> @@ -393,7 +393,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
>         if (sr_ready < 0)
>                 return sr_ready;
> 
> -       ret = spi_nor_read_fsr(nor, nor->bouncebuf);
> +       ret = micron_st_read_fsr(nor, nor->bouncebuf);
>         if (ret)
>                 return ret;
> 
> @@ -407,7 +407,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
>                         dev_err(nor->dev,
>                         "Attempted to modify a protected sector.\n");
> 
> -               spi_nor_clear_fsr(nor);
> +               micron_st_clear_fsr(nor);
> 
>                 /*
>                  * WEL bit remains set to one when an erase or page program
> @@ -433,7 +433,7 @@ static void micron_st_default_init(struct spi_nor *nor)
>         nor->params->set_4byte_addr_mode = micron_st_set_4byte_addr_mode;
> 
>         if (nor->info->mfr_flags & USE_FSR)
> -               nor->params->ready = spi_nor_fsr_ready;
> +               nor->params->ready = micron_st_fsr_ready;
>  }
> 
>  static const struct spi_nor_fixups micron_st_fixups = {
> --
> 2.30.2
>