* Small bug with ZYNX 4-Port NIC (Tulip driver)
@ 2001-10-23 20:35 Ben Greear
0 siblings, 0 replies; only message in thread
From: Ben Greear @ 2001-10-23 20:35 UTC (permalink / raw)
To: linux-kernel, Tulip Mailing List
Regarding the tulip driver that comes default with 2.4.13-pre5:
There seems to be a problem with the ZYNX 4-port NIC.
It auto-negotiates and brings it's link up, but it's
advertise bits are set to (only) 10bt-FD. If I force the
bits to 10/100 FD/HD (all 4 set, in other words), then the
NIC briefly reports this setting (while LINK is DOWN), but
as soon as it completes it's autonegotiation, the advert
bits are once again set to 10bt-FD.
I do NOT see this problem on the D-LINK 4-port NIC or the
EEPRO NICs I've been testing with....
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-10-23 20:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-10-23 20:35 Small bug with ZYNX 4-Port NIC (Tulip driver) Ben Greear
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).