* Re: promise NEITHER IDE PORT ENABLED [not found] ` <036f01c30ff0$d2197fc0$3200000a@dakotapiv> @ 2003-05-02 21:58 ` Carl-Daniel Hailfinger 2003-05-03 15:03 ` Alan Cox 0 siblings, 1 reply; 4+ messages in thread From: Carl-Daniel Hailfinger @ 2003-05-02 21:58 UTC (permalink / raw) To: Javi Pardo (DAKOTA) Cc: Andre Hedrick, Alan Cox, Linux Kernel Mailing List, ataraid-list Andre, Alan, could you please take a look at this? I thought the IDE code in 2.4.21-rc1 is able to force enable the ports of a promise controller. Javi Pardo (DAKOTA) wrote: > > i am probed with the kernel 2.4.21-rc1 and the result is... NEITHER IDE.. > my Motheboard is Tyan Tiger 200T wit Dual processor and promise integrated and only works with the original kernel of RH 8 > >Carl-Daniel Hailfinger wrote: > >>Javi Pardo (DAKOTA) wrote: >> >>>Hello >>>I am Installed RH 8 with standard kernel 2.4.18 >>>i am downloaded the kernel 2.4.20 from kernel.org and i am problem with Promise >> >>Could you please test 2.4.21-rc1? It has newer IDE and could help. >> >> >>>PDC20267: Neither ide ports enabled in bios >>> >>>the motheboard is the tyan Tiger200T, this model have promise ATA100 inside >>> >>>i am selected this options in the kernel >> >>The options look good, but 2.4.20 has some Promise IDE flaws which could >>cause your problem. >> >> >>>CONFIG_BLK_DEV_PDC202XX=y >>># CONFIG_PDC202XX_BURST is not set >>>CONFIG_PDC202XX_FORCE=y >>>CONFIG_BLK_DEV_VIA82CXXX=y >>># CONFIG_IDE_CHIPSETS is not set >>>CONFIG_IDEDMA_AUTO=y >>># CONFIG_IDEDMA_IVB is not set >>># CONFIG_DMA_NONPCI is not set >>>CONFIG_BLK_DEV_IDE_MODES=y >>>CONFIG_BLK_DEV_ATARAID=y >>>CONFIG_BLK_DEV_ATARAID_PDC=y >>># CONFIG_BLK_DEV_ATARAID_HPT is not set >>> >>>I need help, i am read this list and the option CONFIG_PDC202XX_FORCE=y is the solution, but no work.. why? >> >>Please try 2.4.21-rc1 and report back to this list. >> Thanks, Carl-Daniel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: promise NEITHER IDE PORT ENABLED 2003-05-02 21:58 ` promise NEITHER IDE PORT ENABLED Carl-Daniel Hailfinger @ 2003-05-03 15:03 ` Alan Cox [not found] ` <008e01c31224$844c2050$3200000a@dakotapiv> 0 siblings, 1 reply; 4+ messages in thread From: Alan Cox @ 2003-05-03 15:03 UTC (permalink / raw) To: Carl-Daniel Hailfinger Cc: Javi Pardo (DAKOTA), Andre Hedrick, Linux Kernel Mailing List, ataraid-list On Gwe, 2003-05-02 at 22:58, Carl-Daniel Hailfinger wrote: > Andre, Alan, > > could you please take a look at this? I thought the IDE code in > 2.4.21-rc1 is able to force enable the ports of a promise controller. It can - if you set the configuration option to do so ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <008e01c31224$844c2050$3200000a@dakotapiv>]
* Re: promise NEITHER IDE PORT ENABLED [not found] ` <008e01c31224$844c2050$3200000a@dakotapiv> @ 2003-05-06 10:58 ` Carl-Daniel Hailfinger 2003-05-06 12:17 ` Bartlomiej Zolnierkiewicz 0 siblings, 1 reply; 4+ messages in thread From: Carl-Daniel Hailfinger @ 2003-05-06 10:58 UTC (permalink / raw) To: Javi Pardo (DAKOTA) Cc: Alan Cox, Andre Hedrick, Linux Kernel Mailing List, ataraid-list Alan, could you please elaborate which of the options you meant is missing below? Thanks. Javi Pardo (DAKOTA) wrote: > Alan Cox wrote: >>Carl-Daniel Hailfinger wrote: >> >>>could you please take a look at this? I thought the IDE code in >>>2.4.21-rc1 is able to force enable the ports of a promise controller. >> >>It can - if you set the configuration option to do so >> > > i am the problem with the PDC20267 Chipset. > > i am downloaded the kernel 2.4.20 and 2.4.21-rc1 > and i am set this options for IDE > > CONFIG_BLK_DEV_PDC202XX=y > # CONFIG_PDC202XX_BURST is not set > CONFIG_PDC202XX_FORCE=y <- this options force IDE detections > CONFIG_BLK_DEV_VIA82CXXX=y > # CONFIG_IDE_CHIPSETS is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_IDEDMA_IVB is not set > # CONFIG_DMA_NONPCI is not set > CONFIG_BLK_DEV_IDE_MODES=y > CONFIG_BLK_DEV_ATARAID=y > CONFIG_BLK_DEV_ATARAID_PDC=y > # CONFIG_BLK_DEV_ATARAID_HPT is not set > > > the kernel 2.4.20 and 2.4.21-rc1 NO detect the ide channels and mi system crashes > > wath is the problem? i am select all correct options but no work... Regards, Carl-Daniel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: promise NEITHER IDE PORT ENABLED 2003-05-06 10:58 ` Carl-Daniel Hailfinger @ 2003-05-06 12:17 ` Bartlomiej Zolnierkiewicz 0 siblings, 0 replies; 4+ messages in thread From: Bartlomiej Zolnierkiewicz @ 2003-05-06 12:17 UTC (permalink / raw) To: Carl-Daniel Hailfinger Cc: Javi Pardo (DAKOTA), Alan Cox, Andre Hedrick, Linux Kernel Mailing List, ataraid-list [-- Attachment #1: Type: TEXT/PLAIN, Size: 1702 bytes --] Hi, It is a config error, CONFIG_PDC202XX_FORCE depends on CONFIG_BLK_DEV_PDC202XX_NEW. So even if you set it manually in .config to y, the change won't be propagated. Here is a quick patch to make force option visible for both old/new pdc. More elegant solution will be to split force option for old/new pdc as suggested by #fixme in Config.in. Patch agaist 2.4.21-rc1, if it works for you please forward to Marcello. Regards, -- Bartlomiej On Tue, 6 May 2003, Carl-Daniel Hailfinger wrote: > Alan, > > could you please elaborate which of the options you meant is missing > below? Thanks. > > Javi Pardo (DAKOTA) wrote: > > Alan Cox wrote: > >>Carl-Daniel Hailfinger wrote: > >> > >>>could you please take a look at this? I thought the IDE code in > >>>2.4.21-rc1 is able to force enable the ports of a promise controller. > >> > >>It can - if you set the configuration option to do so > >> > > > > i am the problem with the PDC20267 Chipset. > > > > i am downloaded the kernel 2.4.20 and 2.4.21-rc1 > > and i am set this options for IDE > > > > CONFIG_BLK_DEV_PDC202XX=y > > # CONFIG_PDC202XX_BURST is not set > > CONFIG_PDC202XX_FORCE=y <- this options force IDE detections > > CONFIG_BLK_DEV_VIA82CXXX=y > > # CONFIG_IDE_CHIPSETS is not set > > CONFIG_IDEDMA_AUTO=y > > # CONFIG_IDEDMA_IVB is not set > > # CONFIG_DMA_NONPCI is not set > > CONFIG_BLK_DEV_IDE_MODES=y > > CONFIG_BLK_DEV_ATARAID=y > > CONFIG_BLK_DEV_ATARAID_PDC=y > > # CONFIG_BLK_DEV_ATARAID_HPT is not set > > > > > > the kernel 2.4.20 and 2.4.21-rc1 NO detect the ide channels and mi system crashes > > > > wath is the problem? i am select all correct options but no work... > > Regards, > Carl-Daniel [-- Attachment #2: Type: TEXT/PLAIN, Size: 940 bytes --] --- linux-2.4.21-rc1/drivers/ide/Config.in Sat Apr 26 17:10:47 2003 +++ linux/drivers/ide/Config.in Tue May 6 13:46:15 2003 @@ -66,7 +66,7 @@ dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD $CONFI_BLK_DEV_IDEDMA_PCI dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI # FIXME - probably wants to be one for old and for new - dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX_NEW + dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86 dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-05-06 12:05 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <040101c308df$452110f0$3200000a@dakotapiv> [not found] ` <3EA683A8.8040303@gmx.net> [not found] ` <036f01c30ff0$d2197fc0$3200000a@dakotapiv> 2003-05-02 21:58 ` promise NEITHER IDE PORT ENABLED Carl-Daniel Hailfinger 2003-05-03 15:03 ` Alan Cox [not found] ` <008e01c31224$844c2050$3200000a@dakotapiv> 2003-05-06 10:58 ` Carl-Daniel Hailfinger 2003-05-06 12:17 ` Bartlomiej Zolnierkiewicz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).