From: Samuel Flory <sflory@rackable.com>
To: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Steven Dake <sdake@mvista.com>,
linux-kernel@vger.kernel.org, andre@linux-ide.org,
frankt@promise.com
Subject: Re: IDE/Promise 20276 FastTrack RAID Doesn't work in 2.4.21, patch attached to fix
Date: Thu, 10 Jul 2003 14:11:07 -0700 [thread overview]
Message-ID: <3F0DD66B.6080209@rackable.com> (raw)
In-Reply-To: <Pine.SOL.4.30.0307102202340.22284-100000@mion.elka.pw.edu.pl>
[-- Attachment #1: Type: text/plain, Size: 1144 bytes --]
Bartlomiej Zolnierkiewicz wrote:
>Hi,
>
>Do you have "Special FastTrak Feature" enabled?
>
>
Can we change the option to something that makes sense. I get the
feeling no one understands what it does at 1st glance. This is the 2nd
time I've seen a patch like this.
>--
>Bartlomiej
>
>On Thu, 10 Jul 2003, Steven Dake wrote:
>
>
>
>>Folks,
>>
>>After I upgraded to 2.4.21, I noticed my Gigabyte motherboard with
>>onboard IDE Promise 20276 FastTrack RAID no longer works. The following
>>patch fixes the problem, which appears to be an incomplete list of
>>devices in the ide setup code. There are probably other fasttrack RAID
>>adaptors that should be added to the setup code, but I don't know what
>>they are.
>>
>>Thanks
>>-steve
>>
>>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
--
Once you have their hardware. Never give it back.
(The First Rule of Hardware Acquisition)
Sam Flory <sflory@rackable.com>
[-- Attachment #2: ftdoc.diff --]
[-- Type: text/plain, Size: 1867 bytes --]
diff -ur linux-2.4.22-pre3-ac1-old/Documentation/Configure.help linux-2.4.22-pre3-ac1/Documentation/Configure.help
--- linux-2.4.22-pre3-ac1-old/Documentation/Configure.help 2003-07-07 04:23:56.000000000 -0700
+++ linux-2.4.22-pre3-ac1/Documentation/Configure.help 2003-07-10 05:53:27.000000000 -0700
@@ -1297,9 +1297,12 @@
If unsure, say N.
-Special FastTrak Feature
+Ignore FastTrak Bios and configure drives as IDE disks
CONFIG_PDC202XX_FORCE
- For FastTrak enable overriding BIOS.
+ Enable overriding BIOS RAID configuration. Without this option the
+ kernel may refuse to see your drives. Do not enable if you are
+ using Promise's binary module. This option is compatible with the
+ GPL ataraid driver.
SiS5513 chipset support
CONFIG_BLK_DEV_SIS5513
diff -ur linux-2.4.22-pre3-ac1-old/drivers/ide/Config.in linux-2.4.22-pre3-ac1/drivers/ide/Config.in
--- linux-2.4.22-pre3-ac1-old/drivers/ide/Config.in 2003-07-07 04:18:53.000000000 -0700
+++ linux-2.4.22-pre3-ac1/drivers/ide/Config.in 2003-07-10 05:51:22.000000000 -0700
@@ -66,7 +66,7 @@
dep_mbool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI
dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_BLK_DEV_PDC202XX_OLD" = "y" -o "$CONFIG_BLK_DEV_PDC202XX_OLD" = "m" -o "$CONFIG_BLK_DEV_PDC202XX_NEW" = "y" -o "$CONFIG_BLK_DEV_PDC202XX_NEW" = "m" ]; then
- bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE
+ bool ' Ignore FastTrak Bios and configure drives as IDE disks' CONFIG_PDC202XX_FORCE
fi
dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI
next prev parent reply other threads:[~2003-07-10 21:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-10 19:49 IDE/Promise 20276 FastTrack RAID Doesn't work in 2.4.21, patch attached to fix Steven Dake
2003-07-10 20:04 ` Bartlomiej Zolnierkiewicz
2003-07-10 20:45 ` Steven Dake
2003-07-10 21:11 ` Samuel Flory [this message]
2003-07-10 21:29 ` Steven Dake
2003-07-10 22:10 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F0DD66B.6080209@rackable.com \
--to=sflory@rackable.com \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=andre@linux-ide.org \
--cc=frankt@promise.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sdake@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).