linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: Intel-based motherboard
@ 2003-07-11  1:04 Cole Nielsen
  0 siblings, 0 replies; 3+ messages in thread
From: Cole Nielsen @ 2003-07-11  1:04 UTC (permalink / raw)
  To: linux-kernel

Hello again LKML -
   I appreciate you all sending me messages today in an effort to solve 
my problem - based on some of the questions that I was asked regarding 
my system I pretty much figured out that DMA was enabled for the HD but 
NOT for the CD drives... Asking around in some message boards, I was 
able to determine the approprite method to enable it for the cd drives. 
I greatly appreciate that time that you all took to help me :)

Cole


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Intel-based motherboard
  2003-07-10 16:51 Cole Nielsen
@ 2003-07-10 17:47 ` Samuel Flory
  0 siblings, 0 replies; 3+ messages in thread
From: Samuel Flory @ 2003-07-10 17:47 UTC (permalink / raw)
  To: Cole Nielsen; +Cc: linux-kernel

Cole Nielsen wrote:

> Hello -=-
>   I know it's considered poor practice to just post to a list but I 
> have a question which I and others have been unable to solve relating 
> to the chipset on my motherboard.
>   I have an Intel 845PE-based motherboard in my Dell 4550 purchased 
> last May. I've been running LINUX on it for about 2 months now and I 
> like it a lot. Interestingly enough, even with DMA enabled, 
> performance from the HD, CD-ROM, and CD-RW sucks! For example... 
> writing a 650M CD takes nearly 45 minutes on my 40x burner. Copying a 
> few hundred meg of data from one partition to another on the HD took 
> nearly an hour and a half. When I try to watch a DivX movie or one of 
> the movies for q3 or Diablo 2, they skip and get out of synch. I've 
> included some information about my system which may be of help.
>
> ==== /sbin/lspci ====
> 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host 
> Bridge (rev 11)
> 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP 
> Bridge (rev 11)
> 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
> 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
> 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
> 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
> 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
>
> 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)
>
> 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
> 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 
> MX420] (rev a3)
> 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
> Capture (rev 11)
> 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
> Capture (rev 11)
> 02:01.0 Communication controller: Conexant HSF 56k Data/Fax/Voice/Spkp 
> Modem (rev 01)
> 02:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 
> (rev 0a)
> 02:02.1 Input device controller: Creative Labs SB Live! MIDI/Game Port 
> (rev 0a)
> 02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL-8139/8139C/8139C+ (rev 10)
>
> ==== dmesg | grep ide ====
> ide-floppy driver 0.99.newide
> reiserfs: checking transaction log (ide0(3,1)) for (ide0(3,1))
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> ide-scsi: hdd: unsupported command in request queue (0)
> Linux video capture interface: v1.00
> bttv0: registered device video0
>
> Dell Dimension 4550
> 512M RAM
> 3.06Ghz
> 80G HD
> SuSE 8.1
> 50x CD-ROM
> 40x52x40 burner
>
>
> again, I post to the list as a last resort because if I can't get this 
> working, I'll have to return to using m$ software. Thanks in advance 
> for any help!
>
> Cole Nielsen
>

  What are the ide settings on the various devices?  Can we have the 
output of hdparm -vi, hdparm -d, and hdparm -t on each device?  What 
kernel are you using?  My guess is you are are not using dma.  Try the 
latest 2.4.22pre kernel.

-- 
Once you have their hardware. Never give it back.
(The First Rule of Hardware Acquisition)
Sam Flory  <sflory@rackable.com>



^ permalink raw reply	[flat|nested] 3+ messages in thread

* Intel-based motherboard
@ 2003-07-10 16:51 Cole Nielsen
  2003-07-10 17:47 ` Samuel Flory
  0 siblings, 1 reply; 3+ messages in thread
From: Cole Nielsen @ 2003-07-10 16:51 UTC (permalink / raw)
  To: linux-kernel

Hello -=-
   I know it's considered poor practice to just post to a list but I 
have a question which I and others have been unable to solve relating to 
the chipset on my motherboard.
   I have an Intel 845PE-based motherboard in my Dell 4550 purchased 
last May. I've been running LINUX on it for about 2 months now and I 
like it a lot. Interestingly enough, even with DMA enabled, performance 
from the HD, CD-ROM, and CD-RW sucks! For example... writing a 650M CD 
takes nearly 45 minutes on my 40x burner. Copying a few hundred meg of 
data from one partition to another on the HD took nearly an hour and a 
half. When I try to watch a DivX movie or one of the movies for q3 or 
Diablo 2, they skip and get out of synch. I've included some information 
about my system which may be of help.

==== /sbin/lspci ====
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host 
Bridge (rev 11)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge 
(rev 11)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)

00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)

00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 
MX420] (rev a3)
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
(rev 11)
02:01.0 Communication controller: Conexant HSF 56k Data/Fax/Voice/Spkp 
Modem (rev 01)
02:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
02:02.1 Input device controller: Creative Labs SB Live! MIDI/Game Port 
(rev 0a)
02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)

==== dmesg | grep ide ====
ide-floppy driver 0.99.newide
reiserfs: checking transaction log (ide0(3,1)) for (ide0(3,1))
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
ide-scsi: hdd: unsupported command in request queue (0)
Linux video capture interface: v1.00
bttv0: registered device video0

Dell Dimension 4550
512M RAM
3.06Ghz
80G HD
SuSE 8.1
50x CD-ROM
40x52x40 burner


again, I post to the list as a last resort because if I can't get this 
working, I'll have to return to using m$ software. Thanks in advance for 
any help!

Cole Nielsen


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2003-07-11  0:48 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-11  1:04 Intel-based motherboard Cole Nielsen
  -- strict thread matches above, loose matches on Subject: below --
2003-07-10 16:51 Cole Nielsen
2003-07-10 17:47 ` Samuel Flory

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).