* [PATCH v5 1/2] sdhci-of-arasan: Add device tree parameter xlnx-fails-without-test-cd bit
@ 2016-09-07 22:22 Zach Brown
2016-09-07 22:22 ` [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present Zach Brown
0 siblings, 1 reply; 3+ messages in thread
From: Zach Brown @ 2016-09-07 22:22 UTC (permalink / raw)
To: adrian.hunter
Cc: robh+dt, ulf.hansson, mark.rutland, linux-mmc, devicetree,
linux-kernel, michal.simek, soren.brinkmann, linux-arm-kernel,
zach.brown
The sdhci controller on xilinx zynq devices will not function unless
the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
In cases where it is impossible to provide the CD bit in hardware,
setting the controller to test mode and then setting inserted to true
will get the controller to function without the CD bit.
The device property "xlnx-fails-without-test-cd" will let the arasan
driver know the controller does not have the CD line wired and that the
controller does not function without it.
Signed-off-by: Zach Brown <zach.brown@ni.com>
---
v2:
* improved commit messages
* removed fake-cd device property
* removed fake-cd quirk
* use broken-cd device property
* documented new usage of broken-cd
v3:
* removed new usage of broken-cd
* created fails-without-test-cd device property
* created arasan controller specific quirk
v4:
* changed fails-without-test-cd to xlnx-fails-without-test-cd
* removed extra blank line
v5:
* Fixed style mistake
* Changed (1 << 0 ) to BIT(0)
Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 31b35c3..7407450 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -17,6 +17,10 @@ Required Properties:
- interrupts: Interrupt specifier
- interrupt-parent: Phandle for the interrupt controller that services
interrupts for this device.
+Optional Properties:
+- xlnx-fails-without-test-cd: when present, the controller doesn't work when
+ the CD line is not connected properly, and the line is not connected
+ properly. Test mode can be used to force the controller to function.
Required Properties for "arasan,sdhci-5.1":
- phys: From PHY bindings: Phandle for the Generic PHY for arasan.
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present
2016-09-07 22:22 [PATCH v5 1/2] sdhci-of-arasan: Add device tree parameter xlnx-fails-without-test-cd bit Zach Brown
@ 2016-09-07 22:22 ` Zach Brown
2016-09-08 7:21 ` Adrian Hunter
0 siblings, 1 reply; 3+ messages in thread
From: Zach Brown @ 2016-09-07 22:22 UTC (permalink / raw)
To: adrian.hunter
Cc: robh+dt, ulf.hansson, mark.rutland, linux-mmc, devicetree,
linux-kernel, michal.simek, soren.brinkmann, linux-arm-kernel,
zach.brown
The sdhci controller on xilinx zynq devices will not function unless
the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
In cases where it is impossible to provide the CD bit in hardware,
setting the controller to test mode and then setting inserted to true
will get the controller to function without the CD bit.
When the device has the property xlnx-fails-without-test-cd the driver
changes the controller to test mode and sets test inserted to true to
make the controller function.
Signed-off-by: Zach Brown <zach.brown@ni.com>
---
drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index b6f4c1d..46be9d9 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -23,6 +23,7 @@
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include "sdhci-pltfm.h"
+#include <linux/of.h>
#define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
@@ -38,6 +39,10 @@
struct sdhci_arasan_data {
struct clk *clk_ahb;
struct phy *phy;
+ unsigned int arasan_quirks; /* Arasan deviations from spec */
+
+/* Controller does not have CD wired and will not function normally without */
+#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD BIT(0)
};
static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
@@ -79,12 +84,32 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
}
}
+void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
+{
+ u8 ctrl;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_arasan_data *sdhci_arasan;
+
+ sdhci_reset(host, mask);
+
+ pltfm_host = sdhci_priv(host);
+ sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+
+ if (sdhci_arasan->arasan_quirks &
+ SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl |= SDHCI_CTRL_CDTEST_INS |
+ SDHCI_CTRL_CDTEST_EN;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
+}
+
static struct sdhci_ops sdhci_arasan_ops = {
.set_clock = sdhci_arasan_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_arasan_get_timeout_clock,
.set_bus_width = sdhci_set_bus_width,
- .reset = sdhci_reset,
+ .reset = sdhci_arasan_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
@@ -179,6 +204,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_arasan_data *sdhci_arasan;
+ struct device_node *np = pdev->dev.of_node;
host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata,
sizeof(*sdhci_arasan));
@@ -215,6 +241,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
}
sdhci_get_of_property(pdev);
+
+ if (of_get_property(np, "xlnx-fails-without-test-cd", NULL)) {
+ sdhci_arasan->arasan_quirks |=
+ SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
+ }
+
pltfm_host->clk = clk_xin;
ret = mmc_of_parse(host->mmc);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 609f87c..60dbf1f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -84,6 +84,8 @@
#define SDHCI_CTRL_ADMA32 0x10
#define SDHCI_CTRL_ADMA64 0x18
#define SDHCI_CTRL_8BITBUS 0x20
+#define SDHCI_CTRL_CDTEST_INS 0x40
+#define SDHCI_CTRL_CDTEST_EN 0x80
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present
2016-09-07 22:22 ` [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present Zach Brown
@ 2016-09-08 7:21 ` Adrian Hunter
0 siblings, 0 replies; 3+ messages in thread
From: Adrian Hunter @ 2016-09-08 7:21 UTC (permalink / raw)
To: Zach Brown
Cc: robh+dt, ulf.hansson, mark.rutland, linux-mmc, devicetree,
linux-kernel, michal.simek, soren.brinkmann, linux-arm-kernel
On 08/09/16 01:22, Zach Brown wrote:
> The sdhci controller on xilinx zynq devices will not function unless
> the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
> In cases where it is impossible to provide the CD bit in hardware,
> setting the controller to test mode and then setting inserted to true
> will get the controller to function without the CD bit.
>
> When the device has the property xlnx-fails-without-test-cd the driver
> changes the controller to test mode and sets test inserted to true to
> make the controller function.
>
> Signed-off-by: Zach Brown <zach.brown@ni.com>
Doesn't apply. Please re-base on Ulf's mmc tree's next branch.
But since you're doing that please consider some style changes below.
> ---
> drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index b6f4c1d..46be9d9 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -23,6 +23,7 @@
> #include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include "sdhci-pltfm.h"
> +#include <linux/of.h>
>
> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
>
> @@ -38,6 +39,10 @@
> struct sdhci_arasan_data {
> struct clk *clk_ahb;
> struct phy *phy;
> + unsigned int arasan_quirks; /* Arasan deviations from spec */
Should really try to line up the variable names. The name seems a bit
redundant too e.g. arasan_quirks -> quirks
> +
> +/* Controller does not have CD wired and will not function normally without */
> +#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD BIT(0)
SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD seems unnecessarily long.
What about SDHCI_ARASAN_QUIRK_FORCE_CDTEST?
> };
>
> static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
> @@ -79,12 +84,32 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
> }
> }
>
> +void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
> +{
> + u8 ctrl;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_arasan_data *sdhci_arasan;
Normally we would define and initialize i.e.
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> + sdhci_reset(host, mask);
> +
> + pltfm_host = sdhci_priv(host);
> + sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> + if (sdhci_arasan->arasan_quirks &
> + SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> + ctrl |= SDHCI_CTRL_CDTEST_INS |
> + SDHCI_CTRL_CDTEST_EN;
Didn't need to wrap the line above.
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> + }
> +}
> +
> static struct sdhci_ops sdhci_arasan_ops = {
> .set_clock = sdhci_arasan_set_clock,
> .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> .get_timeout_clock = sdhci_arasan_get_timeout_clock,
> .set_bus_width = sdhci_set_bus_width,
> - .reset = sdhci_reset,
> + .reset = sdhci_arasan_reset,
> .set_uhs_signaling = sdhci_set_uhs_signaling,
> };
>
> @@ -179,6 +204,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> struct sdhci_host *host;
> struct sdhci_pltfm_host *pltfm_host;
> struct sdhci_arasan_data *sdhci_arasan;
> + struct device_node *np = pdev->dev.of_node;
>
> host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata,
> sizeof(*sdhci_arasan));
> @@ -215,6 +241,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> }
>
> sdhci_get_of_property(pdev);
> +
> + if (of_get_property(np, "xlnx-fails-without-test-cd", NULL)) {
> + sdhci_arasan->arasan_quirks |=
> + SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
> + }
> +
> pltfm_host->clk = clk_xin;
>
> ret = mmc_of_parse(host->mmc);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 609f87c..60dbf1f 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -84,6 +84,8 @@
> #define SDHCI_CTRL_ADMA32 0x10
> #define SDHCI_CTRL_ADMA64 0x18
> #define SDHCI_CTRL_8BITBUS 0x20
> +#define SDHCI_CTRL_CDTEST_INS 0x40
> +#define SDHCI_CTRL_CDTEST_EN 0x80
>
> #define SDHCI_POWER_CONTROL 0x29
> #define SDHCI_POWER_ON 0x01
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-09-08 7:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-07 22:22 [PATCH v5 1/2] sdhci-of-arasan: Add device tree parameter xlnx-fails-without-test-cd bit Zach Brown
2016-09-07 22:22 ` [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present Zach Brown
2016-09-08 7:21 ` Adrian Hunter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).